Slow image data transmission between printer and computer

My work computer was recently updated with Windows 7 from Windows XP. During the migration Adobe Acrobat XI Standard had to be reinstalled. After the reinstallation of Adobe Acrobat XI Standard the data transmission of the scanned image from the printer (HP LaserJet 3030) has been extremely slow. The original installation of Adobe Acrobat pre: migration worked fine - normal data transmission speeds. It should also be noted that a new 64 bit HP print driver had to be installed before Adobe was able to do its basic scanning functions.
Any assistance would be greatly appreciated.

Hey whkling,
Could you please let me know what exact dot version of Acrobat XI Standard are you using.
Also, try printing some other PDF file and check if the same problem persists.
Let me know.
Regards,
Anubha

Similar Messages

No 2 way connection between printer and computer HELP HELP going nuts!!!

On the hp website in downloads for hp officejet 6500 series for windows 7 is "additional information' for installing that particular printer for that windows 7, now under "printer setup not complete" it says how to bypass the problem I have though those comands obviously don't work with my windows xp so can someone translate those commands for windows xp so i could try and fix my problem (hope that all makes sense) Also a few questions, the network is setup and passed so should i need to change any ports or does the network setup do it itself? Do you have to have a separate printer icon for usb and wireless,(though i won't need usb when i get this sorted). And why does the hp solution centre no open it comes up with a file that cannot run how do i fix this? HELP

The sync is one way - computer to ipod.

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

Internet sharing between cellphone and computer us...

I have watched some videos in youtube about internet sharing between cellphones and computer using "BLUETOOTH"... How do they do that? How can we do this? Anybody here can share to us how to do this??

24-Aug-2008 12:28 PM
monkeyboy85 wrote:
I personally would not of thaught this is possible as bluetooth is essentially just a radio signal, obviously it can transmit data but i dont think it has the ability to stream a broadband connection. Could be completely wrong but thats what i think.
You are wrong
Most Nokia phones with a bluetooth interface can let you connect your computer to the Internet using your phone as a modem connected by bluetooth. So, BT definitely can support the data stream.
Enabling a computer to use the phone's Internet connection over BT or via USB cable is possible with no additional software on the phone. Doing the opposite, allowing the phone to use the computer's Internet connection via BT, requires additional software. GNUBox does just that.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

No connection between iPhone and computer

I have No connection between iPhone and computer. Please help me. My iPhone (4s) went nuts a little while ago. Nothing happend when I connected the charger. I had to take out and put it back in again and again and again, between 2-10 times before the charger finally was connected. It's been like this for a while now and a did'nt really have that mutch problem with it. Until today when I tried to sync/backup/restore the whole phone. It started to sync but stoped at the sync of the 5:th app. tried to start over but now my computer can't "find" the phone. It says that the USB-device is not reconizeble.
Please help me.
Sorry for the bad english.

See Here...
Device Not Recognised
http://support.apple.com/kb/TS1538
And Here
iPhone, iPad, or iPod touch not appearing in iTunes
iPod appears in Windows but not in iTunes
Also, Here...
Unable to Update or Restore
http://support.apple.com/kb/HT1808

Data Replication Between Sqlserver and Oracle11g using materialized view.

I have Sqlserver 2005 as my source and oracle11g as my target.I need to populate the target daily with change data from source.
for that we have created a dblink between sqlserver and oracle and replicated that table as a Materialized view in Oracle.
problem we are getting here is Fast refresh option is not available.each day it will pick full data from the source.
is there any way to use Fast refresh in this scenario??
Thanks in advance.
Regards,
Balaram.

Pl do not post duplicates - Data Replication Between Sqlserver and Oracle11g using materialized view.

Data streaming between server and client does not complete

Using an ad-hoc app, data streaming between server
and client does not complete as it supposed to be.
The process runs well in solaris 5.8, however under 5.9
we have found the characters stream buffer length limitation
is around 900 to 950 characters (by default we are using 3072
characters).
Example:
- We are transfering HTML file, which will be displayed
in the App client, with buffer=3072, the HTML only displayed / transfered
as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
in this case, the only problem that we have is the file transfer will
eventually longer than usual.
- There is another case, where we have to transfer information (data) as stream
to the client. A long data stream will not appear at all in the client.
Any ideas why the change between 5.8 and 5.9 woudl cause problems?
The current app-driver that we are using is compiled using Solaris 5.6,
if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
Thanks
Paul

Does this have anything to do with Java RMI? or with Java come to think of it?

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

My Deskjet HP7610 can't sense the 11 x 17 paper on any of my Acrobat or Photoshop "fit to media" jobs. Why, after I've set every setting to 11 x 17 do both printer and computer cite "paper size mismatch?

My Deskjet HP7610 can't sense the 11 x 17 paper on any of my Acrobat or Photoshop "fit to media" jobs. Why, after I've set every setting to 11 x 17 do both printer and computer cite "paper size mismatch?

Mandeep5062 wrote:
Moving to Photoshop Forum
Try again.

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Data sync between oracle and sql server

Greetings Everyone,
Your expert views are highly appreciable regarding the following.
We at work are evaluation different solutions to achieve data synchronization between oracle and sql server data bases. Data sync i mentioned here is for live applications. We are runnign oracle EBS 11i with custom applications and intending to implement a custom software based on .NET and SQL Server. Now the whole research is to see updates and data changes whenever happens between these systems.
I googled and found Oracle Golden Gate, Microsoft SSIS, Wisdom Force from Informatica....
If you can pour in more knowledge then it's great.
Thank You.

Most of the work involved has to be done through scripts and there is no effective GUI to implement OGG.However using commands is not vey togh and they are very intutive.
These are the steps, from a high level:
1.Get the appropriate GG Software for your source and target OS.
2.Install GG on source and target systems.
3.Create Manager and extract processes on source system
4.Create Manager and replicat processes on target system
5.Start these processes.
First try to achieve uni-directional replication. Then Bi-directional is easy.I have implemented bi-directional active active replication using Oracle DBs as source and target. Refer to Oracle installation and admin guides for more details.
Here is a good article that may be handy in your case.
http://www.oracle.com/technetwork/articles/datawarehouse/oracle-sqlserver-goldengate-460262.html
Edited by: satrap on Nov 30, 2012 8:33 AM

Most efficient data transfer between RT and FPGA

This post is related to THIS post about DMA overhead.
I am currently investigating themost efficient way to transfer a set of variables to a FPGA target for out application. We have been using DMA FIFOs for communications in both directions (to and from FPGA) but I'm recently questioning whether this is the most efficient approach.
Our application must communicate several parameters (around 120 different variables in total) to the FPGA. Approximately 16 of these are critical meaning that they must be sent every iteration of our RT control loop. The others are also important but can be sent at a slightly slower rate without jeopardising the integrity of our system. Until now we have sent these 16 critical parameters plus ONE non-critical parameter over a DMA to the FPGA card. Each 32-bit value sent incorporates an ID which allows the FPGA to demultiplex to the appropriate global variables on the FPGA. Thus over time (we run a 20kHz control loop on the RT system - we have a complete set of paramaters sent @ approx. 200Hz). The DMA transfers are currently a relatively large factor in limiting the execution speed of our RT loop. Of the 50us available per time-slot running at 20kHz approximately 12-20us of these are the DMA transfers to and from the FPGA target. Our FPGA loop is running at 8MHz.
According to NI the most efficient way to transfer data to a FPGA target is via DMA. While this may in general be true, I have found that for SMALL amounts of data, DMA is not terribly efficient in terms of speed. Below is a screenshot of a benchmark program I have been using to test the efficiency of different types of transfer to the FPGA. In the test I create a 32MB data set (Except for the FXP values which are only present for comparison - they have no pertinence to this issue at the moment) which is sent to the FPGA over DMA in differing sized blocks (with the number of DMA writes times the array size being constant). We thus move from a single really large DMA transfer to a multitude of extremely small transfers and monitor the time taken for each mode and data type. The FPGA sends a response to the DMA transfers so that we can be sure that when reading the response DMA that ALL of the data has actually arrived on the FPGA target and is not simply buffered by the system.
We see that the minimum round-time for the DMA Write and subsequent DMA read for confirmation is approximately 30us. When sending less than 800 Bytes, this time is essentially constant per packet. Only when we start sending more than 800 Bytes at a time do we see an increase in the time taken per packet. A packet of 1 Byte and a packet of 800 Bytes take approxiamtely the SAME time to transfer. Our application is sending 64 Bytes of critical information to the FPGA target each time meaning that we are clearly in the "less efficient" region of DMA transfers.
If we compare the times taken when communication over FP controls we see that irrespective of how many controls we write at a time, the overall throughput is constant with a timing of 2.7us for 80 Bytes. For a small dedicated set of parameters, the usage of front panel controls seems to be significantly faster than sending per DMA. Once we need to send more than 800 Bytes, the DMA starts to become rapidly more efficient.
Say hello to my little friend.
RFC 2323 FHE-Compliant

So to continue:
For small data sets the usage of FP controls may be faster than DMAs. OK. But we're always told that each and every FP control takes up resources, so how much more expensive is the varsion with FP controls over the DMA.
According to the resource usage guide for the card I'm using (HERE) the following is true:
DMA (1023 Elements, I32, no Arbitration) : 604 Flip-Flops 733 LUT 1 Block RAM
1x I32 FP Control: 52 Flip-Flops 32 LUTs 0 Block RAM
So the comparison would seem to yield the following result (for 16 elements).
DMA : 604 FLip-Flops 733 LUT 1 Block RAM
FP : 832 FLip-Flops 512 LUT 0 Block RAM
We require more FLip-Flops, less LUTs and no Block RAM. It's a swings and roundabouts scenario. Depending on which resources are actually limited on the target, one version or the other may be preferred.
However, upon thinking further I realised something else. When we use the DMA, it is purely a communications channel. Upon arrival, we unpack the values and store them into global variables in order to make the values available within the FPGA program. We also multiplex other values in the DMA so we can't simply arrange the code to be fed directly from the DMA which would negate the need for the globals at all. The FP controls, however, ARE already persistent data storage values and assuming we pass the values along a wire into subVIs, we don't need additional globals in this scenario. So the burning question is "How expensive are globals?". The PDF linked to above does not explicitly mention the difference in cost between FP controls and globals so I'll have to assume they're similar. This of course massively changes the conclusion arrived to earlier.
The comparison now becomes:
DMA + Globals : 1436 Flip-Flops 1245 LUTs 1 Block RAM
FP : 832 FLip-Flops 512 LUT 0 Block RAM
This seems very surprising to me. I'm suspiscious of my own conclusion here. Can someone with more knowledge of the resource requirements differences between Globals and FP controls weigh in? If this is really the case, we need to re-think our approach to communications between RT and FPGA to most likely employ a hybrid approach.
Shane.
Say hello to my little friend.
RFC 2323 FHE-Compliant

Loss of printer and computer connection

I have an imac 10.6.8 and an HP photosmart estation and I have not had any problems with connectivity between the printer and the computer until recently when I received an error message stating that some of the printer software had been deleted. At that point, I uninstalled the softeware and reinstalled it, but it did not solve the connectivity issue. I know that the printer works fine because I am able to air print from my ipad. Next, I posted on the HP forum and was instructed to do a hard reset control-option-command and uninstall the software and then reinstall, but that didn't work either. I have also read the articles on the apple site about adjusting settings under the preferances tab, but that didn't work either. Help! I don't know what else I can do.

Hello shirlyn1,
Since you are able to print from your iPad, but not from your iMac. Can you please tell me if you are getting a specific error message when trying to print from the iMac?
I would just to reset the print system of the Mac. I have included the document 'Mac OS X: How to reset the printing system' http://bit.ly/1gYbCLS. This will delete all the printers listed in the print queue. After the reset has completed, please close down the windows that are open.
Next you will need to complete a verify and repair of the disk permissions. I have included the document 'Disk Utility 12.x: Repair disk permissions' http://bit.ly/1bjFnnP. After the repair disk permissions has been completed, please restart the Mac.
When the Mac is back up, you will need to re-add the printer. I have included the stpes below for this.
1. Click on the Apple Icon
2. Click on System Preferences
3. Click on Print & Fax
4. Click on the Plus sign in the bottom left corner
5. Click on your Printer
6. Click on the Add button
Next you will need to open the HP Utility. This can either be found on the dock, or in the application folder, and in the Hewlett-Packard folder. Try printing one of the test pages. Are you able to print the test page from the HP Utility? Are you able to print another document on from your Mac.
Thank you
I work on behalf of HP

Data Reconciliation between BI and R/3 systems

Hi Gurus,
I want to know how to reconciliation the data between BI and R/3 systems.
is there any easy mentods to reconcile the data.i have also gone through the HOW TO GUIDE document, that document dosen't help me out.
Regards
Sreenivas.Y

1) Either we can reconcile using standard R3 tables eg VBAK , VBAP for sales .
2) You can go for automatic reconcillation where you will have to create a reconcillation data source and extract it to BW using virtual cube (Virtual cube would extract real time data from R3).
Include original cube and this virtual cube in a multiprovider .
Make a report taking keyfigures from both the infoproviders and add a column for difference .If there is 0 difference it means BW data matches with R3 .

Report for date variances between delivery and goods receipt date

dear guru ,
i search a standard report for date variances between delivery date in the purchase order and the goods receipt date.
Do you help me ?
Thanks

Hi,
Use Report ME80FN and here check the delivery schedule option in output screen.

Slow image data transmission between printer and computer

Similar Messages

Maybe you are looking for