Slow internet speeds on iMac running 10.10.3

Hey folks,
Hoping you can help me!
I have a late 2012 21.5" iMac running 10.10.3 and currently I've been getting very slow internet.
I've done some troubleshooting:
I've taken it to the Genius Bar and the airport card is fine.
I've reset dhcp lease which used to work but now no longer does.
Currently, my internet only gets normal speeds (about 100 Mbps down) when I delete my system config folder. Even after deleting it, however, it's only fine for a short period of time (usually a few hours) before it goes back to crawling speeds (usually the speed test ping test fails).
It's definitely not the hardware of the machine because it's picking up the wifi, it's not the router because the speeds are fine on my other devices and fine when I delete the system config folder, so I know it's software related. The issue does persist in a guest user or known good account so I know it's not user repeated.
I wanted to see if anyone else has any ideas to resolve the issue in the OS' current state prior to me just doing an erase and install.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • I have slow internet speed and having issue with download of photoshop cc is there an alternate I can go somewhere with high speed to download.

    I have slow internet speed and having issue with download of photoshop cc is there an alternate I can go somewhere with high speed to download. without using this creative cloud that downloads first.

    We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

  • Slow internet speeds and dropping connection

    hello, I am making this post on behalf of my dad, for a good few months (5-6 maybe even longer) we have been experiencing slow internet speeds and a dropping connection when ever the phone is picked up. when an incoming call is answered some or all devices connected to the internet drop out for a second then come back online, the connection does not completly disapear but causes any voice chat, streaming or gaming to disconect. We have BT wireless phones (not sure what exact type) which we have had for a few years. they are connected through an ADSL filter which as far i can remember has been there for years. We have a netgear DG834GT router which has also been there for a few years. I went onto its settings and got this information, not sure if its usefull or not.
    System Up Time 42:18:47
    ADSL Link
    Downstream
    Upstream
    Connection Speed
    1760 kbps
    448 kbps
    Line Attenuation
    61.0 db
    31.5 db
    Noise Margin
    13.1 db
    13.0 db
     I also got this from the BTW speed tester
    1. Best Effort Test: -provides background information.
    Download  Speed
    1.24 Mbps
    0 Mbps
    2 Mbps
    Max Achievable Speed
     Download speedachieved during the test was - 1.24 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :1.76 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 1.25 Mbps
    I hope this is enough information to figure out what is going on with it.

    put everything back as it was and this is what it looks like now:
    ADSL Link
    Downstream
    Upstream
    Connection Speed
    160 kbps
    448 kbps
    Line Attenuation
    61.5 db
    31.5 db
    Noise Margin
    19.9 db
    12.0 db
    also while i was doing that i did i quiet line test and both myself and my brother listened to it and agreed that there was buzzing/static

  • Slow internet speed -upgraded it to highest speed

    I have had FiOS internet for about four years and never questioned the speed 10/2, but I had it plugged into the router.  On 3/4, I upgraded to TV FiOS/internet and phone bundle.  I do not have my computer where the router is located now (downstairs) and I had asked them to move it upstairs, but left before they had done it.  When I checked the speed (I guess the wireless speed since it is not plugged in to the router), it was 15.66/10 mbps.  I ordered the 35/35 mbps speed bundle.  I called Verizon and asked them about it and she checked the speed and said that it was "pretty good" considering it is wireless.  What?  I am not getting what I am paying for.  Do I need a DSL filter on all the phone lines?  Do I need a new router (I still have the old one)?  I have read on the community here that everyone has called several times to get an answer to the slow internet speed problem. Does anyone have the 35/35 mbps speed plan and have it work at this speed? I might as well go down to the 15 or 25 plan if that speed is all I am every going to get......But maybe if I go down to 25 plan, I'll get 10 or 15...... I will continue to try and work with Verizon to get this solved.   .Thanks for any help.

    Sorry to hear we are losing your business. If there is anything that we can do please let us know
    Anthony_VZ
    **If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

  • Slow internet speed - terrible service

    For the last 5 weeks I have been plagued with very slow internet speed. I have spent at least 4 hours on the phone with verizon techs. They always say that they will call back and never do. This is absolutely the worst service imaginable.

    Step one: Visit http://www.giganews.com/line_info.html and post up the Traceroute the page shows, if you wish. Be aware that your non-bogan public IP Address will show up.  It might shown up as the final hop (bottom-most line of the trace)  might contain a hop with your IP address in it. Either remove that line or show only the first two octets. What I'm looking for is a line that mentions "ERX" in it's name towards the end. If for some reason the trace does not complete (two lines full of Stars), keep the trace route intact.
    For example this what I saw when I was using Verizon
    news.giganews.com
        traceroute to 71.242.*.* (71.242.*.*), 30 hops max, 60 byte packets
        1 gw1-g-vlan201.dca.giganews.com (216.196.98.4) 13 ms 13 ms 13 ms
        2 ash-bb1-link.telia.net (213.248.70.241) 39 ms 7 ms 7 ms
        3 TenGigE0-2-0-0.GW1.IAD8.ALTER.NET (63.125.125.41) 4 ms 4 ms GigabitEthernet2-0-0.GW8.IAD8.ALTER.NET (63.65.76.189) 4 ms
        4 so-7-1-0-0.PHIL-CORE-RTR1.verizon-gni.net (130.81.20.137) 6 ms 6 ms 6 ms
        5 P3-0-0.PHIL-DSL-RTR11.verizon-gni.net (130.81.13.170) 6 ms 6 ms 6 ms
        6 static-71-242-*-*.phlapa.east.verizon.net (71.242.*.*) 32 ms 32 ms 33 ms
    Step two: Can you provide the Transceiver Statistics from your modem?
    #3 If you don't know how to get that info:
    a) What is the brand and model of your modem?
    b) If you have a RJ-45 WAN port router connected to it: What is the brand and model of the RJ-45 WAN port router?
    #4 If you have a RJ-45 WAN port router connected to the modem, even if you know how to get the Transceiver Statistics from the modem: What is the brand and model of the RJ-45 WAN port router?
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Slow internet speed, being used by unknown websites

    Hello all,
    For about a month i have been experiencing slower internet speeds than usual. Contacted the isp and went through all the processes and there was not a problem at their end. I was advised to go to network utility and check how many processes there were, found out that there was too many to count.
    It seems i have internet processes coming from my macbook ip address from uknown sources such as ookla.com etc. Now i have downloaded spyware programs for mac which have failed to find any viruses or spyware at all.
    Now i know the problem is coming from my macbook as the unwanted guests our appearing under the macbook ip address, my router is receiving the right speed so it can't be the isp?
    Right now i am just wondering what to do to stop these processes using up my internet connection and potentially turning my router into a server.
    Any help would be grateful.
    Mark Lees

    Yeah i have little snitch but it appears to not spot these websites, i can send you a screenie of the netstat screen
    Then that would imply the only connections going out from your mac are from legitimate applications.
    lots of things will engage outbound connections.
    safari
    firefox
    itunes
    spotify
    and sites that you visit that have embedded video often host the video on other servers. So you would be suprised at how many socket connections you have at anyone time.
    If you have little snitch look at the monitor window and it will show all the recent connections.
    You could reset little snitch to default rules and then you will be prompted to allow or deny each new connection.

  • Win 7 on bootcamp partition, very slow internet speed

    hi!
    it might be an answer to my problem somewhere on this forum, but
    right now i do not have the time to browse through - so ill just post my problem quick and simple.
    im running windows 7 ultimate on a intel imac, via bootcamp. the issue is simple, yet pretty annoying.
    in iOS, my internet speed is great, as it should be (my bandwidth is 12/12 mbit).
    but in windows 7, for some reason (been like this ever since install) things are going SO slow.
    i mean, watching videos on youtube is a nightmare, every 3 second at lowest quality possible, it still
    has to buffer. same goes for other streaming sites/services. downloading usually does not exceed 300 kb/ps, but in
    ios this could easily hit 1,5 mb/ps.
    if i listen to music on say grooveshark (adjusted to lowest quality) the music stops to buffer if i load a different webpage. its that bad.
    ive taken a bandwidth check in windows and in iOS, and in iOS the speed is normal, in windows its 1/10th of what it should be.
    anyone know why this problem persists?
    as i know of, windows 7 doesnt have any bandwidth limiting of default.
    so i thought it might be a windows 7/imac hardware conflict. help?

    Hi, I'm having the same problem.
    I installed win8.1(64bit) on a iMac7,1 20inch(mid 2007) using Winclone.
    Everything was working fine after I downloaded some driverhelper and installed those drivers.
    Yet the internet on Win8.1 is very slow, the download speed is merely 60-100kb/s .
    While if I open the Mac system, the same resource can easily to beyong 2MB/s.
    As I have 25Mb/10Mb connection at home.
    I'm new here , don't know exactly what driver I need to fix this problem.
    Try to install boot camp.
    However, I tried 5.0 / 4.0 , it all said bootcamp x64 is not supported on this computer model.
    Don't know where i can download the bootcampe 3.0 to have a try ?
    Or is it just too old iMac to be fixed?

  • PC to Mac - slower internet speed?

    I have just purchased my first mac (entry level imac 17"). I love the computer and the operating system. However, the internet speed is extremely slow (almost like dial up). I have a pc and a mac, both running off the same connection. The mac is significantly slower surfing the exact sames sites. It's not a cache issue or anything like that. The mac is just slow. I have tried both the wireless and ethernet connections and it's slow either way. I have tried downloading Firefox and that doesn't seem to make a difference either.
    Any help?
    Thanks

    Clint,
    Have you tried using the "Automatic" setting that you first saw after setup? Unless you made changes to it, I'd imagine it's still in effect, just not active since you're now using another "Location:" setting. Or, was that "Automatic" setup too slow as well?
    If you'd like to try yet again, using the same basics as included in the Network Setup Assistant, but with more stringent settings:))
    There's no need to dump any of your current setups that already work - at System Preferences>Network in the "Location:" selector simply use "New Location..." to name yourself yet another new setup (perhaps "wireless Feb 11") and proceed:
    Set the "Show:" selector to "AirPort" and choose the "TCP/IP" pane. Check that "Configure IPv4:" is set as "Using DHCP." No other settings are necessary on that preference pane. If you make any change, be sure to click the "Apply Now" button before leaving that preference pane.
    Switching from the "TCP/IP" pane to the "PPPoE" pane, if the isp connection settings are already held within your wireless router, which I think they most likely are, the "Connect using PPoE" box should not be checked. There would also be no need to have checked the box "Show PPPoE status in menu bar." If you make any change, again be sure to click the "Apply Now" button before leaving that preference pane.
    Now switching from the "PPPoE" pane to the "AirPort" pane, have the box "Show AirPort status in menu bar" checked, and I suggest setting the "By default, join:" selector to "Preferred networks." Eliminate all other networks listed [remember, you'll only be eliminating them from this new location setup, not from your other, already working "location" setups], then add your wireless network security method, name and password to the preferred networks list, and click the "Apply Now" button.
    Then within the "Options..." button, I would set the "If no preferred networks are found:" selector to "Keep looking for recent networks" and check the box "Require administrator password to Change wireless networks." I would definitely NOT check the "Automatically add new networks" box. Click the "OK" button and again the "Apply Now" button.
    Now switch the "Show:" selector from "AirPort" to "Network Port Configurations" and drag the activated "AirPort" configuration to the top of the list. Once again click the "Apply Now" button.
    Even with this new setup now activated, when you open the menu bar AirPort icon you will continue to see the other wireless networks in your area that are visible to your AirPort - but you won't have to worry about them confusing your Network connection, as it will no longer be considering them.
    To return to one of your previous connection setups, simply switch the "Location:" selector to the one you want to use, and click the "Apply Now" button. The new setup just completed will remain unchanged in the "Location:" selector under the new name chosen.
    Now, in the "Location:" selector name a second "New Location..." (such as "enet to router Feb 11") - this will be for ethernet access to your router.
    Set "Show:" to "Built-in Ethernet" and select the "TCP/IP" pane. Check that "Configure IPv4:" is set as "Using DHCP." No other settings are necessary on that pane. If you make any change, be sure to click the "Apply Now" button before leaving that preference pane.
    Switching from the TCP/IP pane to the PPPoE pane, if the isp connection settings are already held within your wireless router, which I think they most likely are, the "Connect using PPoE" box should not be checked. There would also be no need to have checked the box "Show PPPoE status in menu bar." If you make any change, again be sure to click the "Apply Now" button before leaving that preference pane.
    Now switching from the "PPPoE" pane to the "Ethernet" pane, check that the "Configure:" selector is set to "Automatically" and if any change is made, click the "Apply Now" button.
    Now switch the "Show:" selector from "Built-in Ethernet" to "Network Port Configurations" and drag the activated "Built-in Ethernet" configuration to the top of the list. Then drag the activated "AirPort" configuration to the position immediately under "Built-in Ethernet." Once again click the "Apply Now" button and that new setup is completed and activated. Your iMac will be connected to the router by ethernet and at the same time can use wireless to connect to a wireless printer or to another wireless computer.
    After both new setups are in place, I suggest to boot from your Install Disc 1, get past the first (language selection) screen, and (after fully loading) the second screen will contain a "Utilities" pull-down in the menu bar. Open and select Disk Utility. On the left side of the box, select the top-most drive shown, on the right side select "First Aid" and then click the "Verify Disk" or "Repair Disk" button. Allow to run to completion. Run a second time to be sure. Do not run Disk Permissions Repairs, but instead quit the installer version of Disk Utility, quit the installer process, and restart to your usual startup disk, which you can re-select using "Startup Disk" also located in the "Utilities" pull-down where you found Disk Utility. After restarting, Repair Disk Permissions in a similar manner after opening the version of Disk Utility located in your Applications>Utilites folder.
    Please don't hesitate to let me know the results of the above series of recommendations.
    However, if all that doesn't make for some improvement, I'd think you'd want to check with your router maker's website (or the router supplier's website if it was supplied by your isp) to see if there's a firmware update that might be applied to your router. Such an update might help your router's encryption capabilities, or might provide updated Mac support for the Intel-based Macs.
    Beyond that, I'd be calling AppleCare for support with your connection, since you're still within the 90 days of AppleCare phone support that is part of your new Mac purchase.

  • Very slow download speeds on imac but macbook is fine, why?

    Hi
    After moving house it seems my imac does not want to download anything very fast. I have tried internet speed tests on speedtest.net on both my imac and my mac book. my macbook recorded 14.79 down and 1.25 up and on my imac the same test recorded 0.20 down and 1.05 up. Both computers are connected via WiFi and I am running version 10.6.8 on both computers. Can anyone help?

    Probably not anything to do with your Mac. Apple's servers are notoriously slow. I can never get more than about 1.4 MB/sec, even though I can routinely test at over 3 MBps. This is from Saturday.

  • Slow Internet speed using ethernet cable.

    Hi
    I have a an old imac, still working and running on 10.5.8 !!
    I still use it for music and simple word processing.
    I have linked it up to the internet with a ethernet cable and the internet speed is vastly differnet to by ipad / iphone using wifi.
    I syspect that its the imac and not the router?
    Any idea what has gone wrong and why ethernet connect is not faster than wireless
    Thanks

    DOH!
    It occurs to me --finally-- why you may be seeing this slowness on a wried connection. That latest G4 iMacs retained the 10/100BASE ethernet port Apple used to put on all consumer and educational Macs. The PowerMacs and PowerBook were considered "pro" models and had 10/100/1000BASE ethernet ports--much faster.
    You may see improvement by going wireless if your iMac has USB 2.0 ports:
    NewerTech MAXPower 802.11n/g/b High-Performance Wireles USB Adapter w/bonus ext cradle. For Mac & PC
    It will give wireless "n" speeds if used in a USB 2.0 port--that's the protocol your other devices are probably using.
    To see if you have USB 2.0 ports, hold OPTION and, while hlding it, click the Apple menu. In 10.5, the first entry should change to "System Profiler." Launch it.
    In the opening screen:
    find the code in the second line that I've indicated with the red arrow; for a G4 iMac the line will be "PowerMacx,x"--please post your code and your screen size (15, 17, or 20). From that we can find out if you have USB 2, making the wireless option viable.

  • Slow wifi speeds with imac 3.06ghz

    Hello,
    So I just got my new imac 3.06ghz with 2gb of ram and I have noticed the internet speed when using wifi is extremely slow. Currently I am using a linksys wrt54G router with time warner cable. If I have my old 1st gen macbook side by side with my imac the macbook shows full signal strength on the airport and the imac shows only a few bars. If I run a speed test with them both the macbook downloads at around 1.5mb and the imac gets a blazing 51k.
    Weird symptom on the imac is the blue status bar starts to load in safari, it gets about 3/4 through and then freezes and sits at 3/4 done for a few minutes. During this time images and text on the site slowly start to show up, just like if you were back on a dialup connection.
    Troubleshooting that I have done:
    reset smc and pram
    erase and install
    downloaded all available software updates
    changed the channel that the router is broadcasting on
    - router security is using wep and mixed b&g
    - other devices that work fast with a wireless connection on the router are an iphone, xbox 360 and nintendo ds
    * even tried testing with win xp and bootcamp but I haven't figured out how to get windows to recognize the wireless card yet
    So i'm at the point where I'm assuming this is a hardware issue, maybe the airport antenna?
    Any other suggestions?

    Everyone on here that is experiencing these wifi issues with their new iMacs NEEDS to call Apple and get this elevated. I'm out of the country right now but I'm in the middle of troubleshooting this issue with Apple. I've spoken with several techs and most don't read this forum and are unaware of any widespread wifi issue with the iMacs. When I return home I will be continuing my troubleshooting with Apple on this issue. My symptoms are very similar to the ones posted in several recent threads on this issue. So far it is pointing to a software problem but I can't rule out the hardware yet. However using BootCamp I can launch Windows Vista on the same machine and surf the internet at high speed through the same Time Capsule. Also all other PC's on my home network are connecting to the Time Capsule at high speed with no hiccups. I didn't notice the problem until all the updates were loaded onto my new iMac which I received July 18th.

  • How to resolve slow internet on 2010 iMac

    My internet on my mac is sooooo slow. I have another 27 imac right next to it and the internet speed is fine. Yes I have checked the router, Yes I have tested the connection speed,Yes I have done all of the basic stuff. I went through the apple recomended software troubleshooting pages and to no avail. I have tried to check the hardware but nothing happens when I hold the D button and my mac did not come with an install disk. No it did not. Some things seem to make it better for a little while like starting in safe mode, removing the cache folder from the library. Once Again these are only temporary. The speed really seems to bog down after loading about three or four pages. Need help please. The problem persists even on other accounts and on widows, through boot camp.

    Anti virus software installed?  Little Snitch installed?
    Checked the router, but did you restart it yet?

  • I have very slow internet speed

    I have a intel imac running osx10.6.8, I have a airport extreme base station and an airport express for speakers and extend the network.  It has run very fast for years and in the last week as slowed down significantly.  It is not the airport or cable modem as my wifes pc's internet browsing is very fast have no problem streaming netflix wirelessly thru the bluray player.  It has to be something with the computer. 

    I have a intel imac running osx10.6.8, I have a airport extreme base station and an airport express for speakers and extend the network.  It has run very fast for years and in the last week as slowed down significantly.  It is not the airport or cable modem as my wifes pc's internet browsing is very fast have no problem streaming netflix wirelessly thru the bluray player.  It has to be something with the computer. 

  • Slow Internet Speed C50-30

    I recently purchased a Lenovo C50-30 Desktop and my internet speed is very slow. I have my old computer next to it and it runs just fine on the internet (Using wireless connection). Any ideas on how to increase the internet speed for the Lenovo? Thanks

    Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
    Restart the router and the broadband device, if they're separate. Any change?
    Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
    Are you connected to Ethernet as well as Wi-Fi? If so, disconnect the Ethernet cable or adapter and test.
    If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
    Are any other devices on the network, and if so, are they the same?
    If you can connect to more than one network, are they all the same?
    Are all network applications affected, or only some? If only some, which ones?
    Is networking always the same, or is the problem intermittent?
    Disconnect all other devices from the network. Any change?
    Start up in safe mode and test. Any difference?
    Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
    If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

  • Painfully slow internet speed, even during off-pea...

    I have BT Home Hub, I share a house with 3 other students and we are all on the internet 24/7. Been here for a year and it's never been a problem, apart from the monthly emails from BT telling us we are over using our "unlimited" download policy (fair usage and all that) and warnings that they are limiting us to 1Mbps during peak times.
    Not that this matters because my speed is below 1 during peak times anyway. I would welcome 1Mbps.
    Anyway, none of this really bothered me. But in the past week or so my connection speed has been running between 0.1 and 0.4Mbps all the time. Be it 4pm, or 2am. It's beyond slow. And I don't know what the cause is.

    your connection as in your wifi link or your connection as in your routers sync or just the achievable download speed from a server, or your download speed under best effort from a speedtester?
    it might sound pedantic but its can be quite important.

Maybe you are looking for

  • How to run swing applets in a browser??

    I understand it is a typical question and there lot of articles on it. I tried but am confused. I installed JRE1.3 which has java plug-in along with it which supports swing applets in a browser.Once i got that plug in i also downloaded html converter

  • MY WINDOW 8.1 APP ALL NOT WORKING

    Dear Microsoft i just brought my laptop last month..the model is ACER ASPIRE E1-572G with the windows 8.1 inside..on first week after i buy the laptop all function was great...but after a week my apps not working already even Store app also not worki

  • Runtime acces to append structure

    Hi All! Do any of you gurus know if it is possible to add an append structure to a table allready imported into webdynpro, and then dynamically gain access to the field runtime? Our scenarios is that we have created an application that makes use of d

  • Anyway to add contact number into same box as contacts name in contacts list

    With my Blackberry and steam driven Sony Ericcson it is possible to have a contacts number displayed underneath the contacts name in the main contacts list. Is this possible on iphone? or is there a contacts app anyone can reccomend which displays in

  • How to fetch other user's userID in 1:1 Private chat Scenario

    Please tell me steps to fetch UserID for participant in 1:1 Private Chat Scenario