Slow iTunes downloads from Ariport Expess when used as a range extender

I am having trouble with iTunes downloads - especially large files - when my Mac Book is connected to the internet through my Airport Express, which is acting as a range extender. If I take the Mac Book to the area in my house where the Airport Extreme is the wireless source, downloads are no problem. Does anyone know what the issue might be?

WHHII wrote:
I am having trouble with iTunes downloads - especially large files - when my Mac Book is connected to the internet through my Airport Express, which is acting as a range extender.
Welcome to Apple's discussion groups.
Are your AirPort base stations both newer 802.11n units that support the network "extend" option?
The problem may be that the AirPort Express is too far from the AirPort Extreme. It doesn't matter how strong a signal your Mac receives from the Express if the Express receives a weak signal from the Extreme. Ideally the Express should be half way between the Extreme and where you want to use your Mac.
You can use the advice in this thread to investigate the signal and noise levels that the AirPort Express sees:
http://discussions.apple.com/thread.jspa?threadID=2347845&start=1

Similar Messages

Apps wont download from App Store when using iOS5

iPhone 4 (verizon)
(updated last week) ... Apps waiting in queue to update but a pop up comes up with;;
"unable to download application - (((name))) could not be downloaded at this time" [Done] [Retry]
Restarted device twice and no go ! The old versions of iphone4 app store worked just fine and since ive downloaded iOS5 ,,,, Issues but i've got through most of them but this is a pain in my a$$. I need to update apps on the go as the itunes that it is regristered too is at home & I travel alot.
Please Help

Downloading via the cellular network or Wi-Fi?
If the app updates are over 20mb, they will not download over cellular.
Has any attempt been made to download the updates via the computer and sync them to the device?

Very slow video downloading from iTunes

I have a FIOS 75Mbit connection (and get can 75Mbit on my N-router and Macbook Pro's WIFI). But my new 1080p Apple TV is another matter. Two minute trailers take longer than 2 minutes to download. Half hour HD TV shows can take 90 minutes to download! And if I try to watch a movie I rented, Apple TV tells me it'll be ready to watch in "about 5 hours".
So my immediate reaction is ***. Any ideas why my wireless performance is so great with my MBP and so terrible with my AppleTV (just 10 feet away)

I stumbled across this thread looking for help with the same issue...slow to very slow movie downloads from iTunes.
Changing the DNS, both on my iMac as well as my Airport Extreme router helped.
I'm on Comcast and generally get around 33Mbps downloads via speedtest.net. Based on several Namebench tests Google's Public DNS (8.8.8.8) has always been on top and I've always configured my router and Macs using the top 3 Namebench recommendations with Google at #1 position. However while downloading movies from iTunes Activity Monitor showed very sharp "Data received/sec" rises and falls...anywhere from 4.40MB/sec to 100KB/sec or sometimes zero. Most of the time it would start off well, but trail off to very poor and sporatic speeds after about 30 seconds.
Per finaleMile's and other's recommendations elsewhere I removed Google Public DNS from the settings on my router and iMac and things improved with respect to stability. Although the "top speed" of about 4.40Mbps didn't improve, downloads did smooth out and remain between about 2.30Mbps to 4.10Mbps during the entire download. Not speedy but a marked improvement in stability and overall download time.
Thanks for the tip!
BTW, I've found that during regular web surfing, using Google's Public DNS is faster so I re-add it after downloading movies from iTunes. It's a bit of a PIA, but worth it. Wish there were a better option though.
FWIW I tend to download rented and purchased movies to iTunes on my iMac and then play them back via my Apple TV3 rather than "stream" them directly from iTunes. That way if there are external network problems they won't have a negative impact on our viewing experience.

I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way. I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

Newer Reader versions are more strict than older versions (and other PDF viewers). If certain minimum requirements are not met, Reader will tell you that the PDF is damaged. This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
You should contact the creator of these PDFs.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.

How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.

Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred

To run a report from command line, when using jdbc-odbc bridge

Hi,
How to run a report from command line, when using jdbc-odbc bridge?
Usually with tns, we do by "rwrun module=<> userid=<user>/<passwd>@tns".
with odbc, we do by "rwrun module=<> userid=<user>/<passwd>@odbc:DSN"
Please specify, what is command line arguments for jdbc-odbc bridge driver?
Environment : Oracle 9i Report Builder on WinNT
Database : Sybase
Regards,
Ramanan

Hello Ramanan,
Report Builder : connect JDBC Query in Report Builder is to through Connection Dialog in JDBC Query Editor. User can use a Sign on parameter (can use, default : P_JDBCPDS or can create new) to connect to JDBC Data Source. Connection once made will be mentioned and will be reused through out Reports Builder.
JDBC PDS allows user to connect one or more same or different kind of databases.
While running report through runtime or Server, user can pass the sign on parameter(connection string) value, like any other user parameter.
Syntax for connection string : <username>/<password>@databaseURL . The syntax of database part of connection string depend on the type of JDBC Driver used to connect to Data Source while designing the JDBC Query. databaseURL refer to the location of the database and its format depend on the JDBCPDS river selected in design time while creating the JDBC Query.
rwrun eg :
rwrun report=jdbc_odbc.rdf destype=file desname=output.html desformat=html P_JDBCPDS=scott/tiger@database
Server eg :
http://server.com:8888/servlet/RWServlet?server=MyReportServer+report=jdbc_odbc.rdf+destype=cache+desformat=html+P_JDBCPDS=scott/tiger@database
http :
Please see ORACLE_HOME/reports/conf/jdbcpds.conf for more information.
With Regards
Reports Team

The numbering format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended

The numbering in (Contents) format keeps changing when making PDF's from Word 2007 ? Using Acrobat 9 Pro Extended.

The issue is that I have made up a contract in Word.
The second page has a list of all contents of the contract.
gghhjhhbhbhhbhbjbhj....1
bv v vghvjvjnnnnnnnnn....2
When we convert to PDF some of the numbers change. Example 20 becomes 201.
Your help is appreciated.
Cheers Ocean designs.

How stop PS6 from removing the DPI value from an image when using "save for the web"?

How stop PS6 from removing the DPI-value from an image when using "save for the web"?
Example:
- Open a tif image, that contains a dpi value (resolution).
- Use the splice tool in PS6.
- Export the slices with "Save for web", as gif-files.
Then the dpi value is removed, the gif files has no dpi value (it's empty).
How can we stop PS6 from removing the dpi value when using "save for web"?
OR:
When using the slice tool, how can we save the sliced pieces without PS removing the dpi value?

you can make your art go a little bit over the bounds. or you can make sure your artboart and art edges align to pixels

My iTunes songs won't drag when using wacom tablet mouse. When is Apple going to fix this?

My iTunes songs won't drag when using wacom tablet mouse. When is Apple going to fix this? Wacom says apple was made aware of this as long ago as July 2011.

no one in here knows when Apple is going to fix it. We are just users like you and have no more access to information than anyone else, including you.

How do i get an itunes library from a phone when the computer has crashed and it needs to go on a new computer

How do i get an itunes library from a phone when the computer has crashed and it needs to go on a new computer

1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

How do i stop the rainbow coloured circle from appearing especially when using IPhoto?

how do i stop the rainbow coloured circle from appearing especially when using IPhoto?

Back up all data immediately as your boot drive may be failing.
If you have more than one user account, these instructions must be carried out as an administrator.
Triple-click anywhere in the line below on this page to select it:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|Previous Sh' | tail | open -ef
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.

[svn:fx-3.x] 11959: Removing rpc-encoded id attributes from the referent when used as a multiRef (i.e.

Revision: 11959
Revision: 11959
Author:   [email protected]
Date:     2009-11-18 14:16:08 -0800 (Wed, 18 Nov 2009)
Log Message:
Removing rpc-encoded id attributes from the referent when used as a multiRef (i.e. referenced via an href attribute). These attributes should not be included in generic deserialization of types to ActionScript (e.g. when deserializing xsd:anyType).
QE notes: Yes, this should fix the regression. We'll still need a further change to remove attributes in SOAP and XSI namespaces.
Doc notes: N/A
Bugs: SDK-23140
Reviewer: Svetlin
Tests run: Checkintests, bug test case
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23140
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/rpc/src/mx/rpc/soap/SOAPDecoder.as

any chance you are using atheros wifi?

[iPad Mini no Retina, iOS 7.0.4] Sound in only one side of earphone (no mic), but sound come from both sides when using FaceTime

Recently, I found with iPad Mini w/o Retina, iOS 7.0.4, the sound comes only from left side of my earphone when listening music, watching YouTube videos, even playing system sound. But the sound come from both sides when using FaceTime.
Earphone is not broken. Plug completely into the audio jack. This problem only shows up recently, worked fine weeks ago.
Anyone has the same problem? Or has some solution on this issue?

Settings>General>Accessibility>HEARING>Adjust the Left and Right Speaker with slider

I want to transfer my iTunes downloads from MacBook Pro to sandisk memory stick?

I want to transfer my iTunes downloads from MacBook Pro to sandisk memory stick. Can I do this?

Yes you can drag and drop them to the SD card.

Slow iTunes downloads from Ariport Expess when used as a range extender

Similar Messages

Maybe you are looking for