Slow Line State update - CUEAC 8.5.1

We have recently rolled out CUEAC in our enterprise. On our attendant console machines, line state for users phones is slow to update on the console, which sometimes causes issues with our receptionists.
Is there anyone who has experienced this before and if so, what was your fix?
Thanks,
Nick

One more thing... In order for the registry key to take affect on the operator's machine, you need to be exited out of the Attendant Console client so that it is not a process running in task manager.  After exiting the Attendant Console client, make the registry change, exit the registry and then start up the Attendant Console client.  You can verify that the registry change stuck by going back to the registry key and checking the setting.

Similar Messages

  • High Pings, slow performance. Good line stats. P...

    Hi 
    I am suffering from very high ping times and variable download speeds.  I normally get about 15ms ping and 12-15Mb download.  I am currently getting 200-500ms ping times and 1Mb-6Mb download and significant packet loss.  Ping test gives me a server in holland as fastest server!
    My line stats look fine - problem doesn't seem to be the local loop.
    I swapped the ECI modem for a Hauwei from eBay in case that was causing an issue (and so I could access the stats) but it didn't improve things.  Any clue?  Do you know how to get to someone in BT  that I can have a sensible conversation with?  I am preparing myself for the usual long drawn out fight with the helpdesk and hours on the phone.
    1) Exchange and cabinet details
    BT BROADBAND AVAILABILITY CHECKER
    Telephone Number *********** on Exchange HARPENDEN is served by Cabinet 49
    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date  High Low High Low    
    FTTC Range A (Clean)
    17
    10.6
    1.3
    0.8
    Available
    FTTC Range B (Impacted)
    13.4
    5.3
    1.2
    0.5
    Available
    WBC ADSL 2+
    Up to 2.5
    1 to 4
    Available
    ADSL Max
    Up to 2
    1 to 3.5
    Available
    WBC Fixed Rate
    1 
    Available
    Fixed Rate
    1 
    Available
    Other Offerings
    FTTP on Demand
    330
    30
    Available
    Fibre Multicast
    Available
    Copper Multicast
    Available
    2) DSL Modem Details
    Device
    Help
    Product type
    EchoLife HG612  
    Device ID
    10C61F-21530315408K25030366
    Hardware version
    VER.B
    Software version
    V100R001C01B030SP08
    Firmware version
    A2pv6C038m.d24j
    Batch number
    BC1P6.030.A2pv6C038m.d24j
    System up time
    0 days 1 hours 18 minutes 15 seconds
    3) DSL Line Stats
    Connection Status
    Help
    Mode
    VDSL2  
    Traffic type
    PTM  
    DSL synchronization status
    Up  
    DSL up time
    0  
    Line Status
    Help
    Downstream
    Upstream
    Attainable rate (kbit/s)
    15524
    1134
    SNR margin (dB)
    30.9
    0
    Line attenuation (dB)
    10.1
    10.5
    Output power (dBmV)
    10.1
    10.5
    Statistics
    Help
    Path 0
    Path 1
    Downstream
    Upstream
    Downstream
    Upstream
    Line rate (kbit/s)
    14999 
    1077 
    0 
    0 
    CRC errors
    222 
    138 
    18 
    18 
    FEC errors
    0 
    3 
    4 
    0 
    HEC errors
    90 
    58 
    32 
    32 
    Thanks for your help!

    Thanks for the quick response!
    BusyBox v1.9.1 (2014-01-21 16:44:38 CST) built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    # xdslcmd info --pbParams
    xdslcmd: ADSL driver and PHY status
    Status: Showtime
    Retrain Reason: 0
    Last initialization procedure status: 0
    Max: Upstream rate = 1134 Kbps, Downstream rate = 15580 Kbps
    Bearer: 0, Upstream rate = 1077 Kbps, Downstream rate = 14999 Kbps
    Bearer: 1, Upstream rate = 0 Kbps, Downstream rate = 0 Kbps
    Discovery Phase (Initial) Band Plan
    US: (7,32) (871,1205) (1972,2782) 
    DS: (33,859) (1216,1961) (2793,3970) 
    Medley Phase (Final) Band Plan
    US: (7,32) 
    DS: (33,859) 
      VDSL Port Details  Upstream  Downstream
    Attainable Net Data Rate:     1134 kbps     15580 kbps
    Actual Aggregate Tx Power:       10.5 dBm     10.1 dBm
    ==================================================​==================================
    VDSL Band StatusU0U1U2U3U4D1D2D3
      Line Attenuation(dB): 13.4  N/A  N/A  N/A  N/A 28.2 86.8  N/A
    Signal Attenuation(dB): 13.4  N/A  N/A  N/A  N/A 44.8  N/A  N/A
    SNR Margin(dB): 6.8  N/A  N/A  N/A  N/A 6.7  N/A  N/A
    TX Power(dBm): 10.5  N/A  N/A  N/A  N/A 10.1  N/A  N/A

  • Can you help me interpret the following lines in UPDATE rule?

    Hi,
    Can you help me interpret the following lines in UPDATE rule?
    1. What is the role of role of u201CCHANGING RESULT.u201D and u201CCHANGING lc_local_value.u201D?
    2. What is the role of the CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY', in particular the Exporting and Importing parts?
    3. Can I say that u201CCOMM_STRUCTURE-ORDER_VALu201D in the subroutine is passed to u201Clc_document_valueu201D in the u201CFORM loc_curr_convertu201D; and further passed to u201Cforeign_amountu201D in the u201CCALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'u201D?
    4. Finally, what becomes of my original u201CActual Goods receipt quantityu201D( 0GR_QTY ) which I am writing the routine for? I donu2019t see any where in the code that it is being referred to? Do any of these codes affect the value of 0GR_QTY?
    5. Also, if there are 3 different subroutines in the INCLUDE and I am making the change described in #4 above, how do I know which of the 3 subroutines to call?
    ===============================
    ===============================
    So I am reviewing a transfer routine in for u201CActual Goods receipt quantityu201D and routine an INCLUDE statement: INCLUDE RS_BCT_MM_UPDATE_RULES.
    The update rule also includes the following properties to run the following subroutine in the Include:
    IF u2026..
    perFORM LOC_CURR_CONVERT
               USING    COMM_STRUCTURE-ORDER_VAL
                        COMM_STRUCTURE-DOC_DATE
                        COMM_STRUCTURE-ORDER_CURR
                        COMM_STRUCTURE-LOC_CURRCY
                        COMM_STRUCTURE-EXCHG_RATE
               CHANGING RESULT.
    I verified in the INCLUDE (RS_BCT_MM_UPDATE_RULES) and the subroutine is as follows:
    FORM loc_curr_convert
      USING    lc_document_value
               lc_date
               lc_document_currency
               value(lc_local_currency)
               lc_rate
      CHANGING lc_local_value.
    conversion of lc_rate from floating-point to decimal. Necessary for *
    call of CONVERT_TO_LOCAL_CURRENCY.
    data lc_rate_dec type p decimals 5.
    lc_rate_dec = lc_rate.
      IF lc_document_currency = lc_local_currency
      no conversion necessary -> Main case 1
        AND NOT ( lc_document_currency IS INITIAL
               OR lc_local_currency IS INITIAL ) .
        lc_local_value = lc_document_value.
      ELSEIF NOT ( lc_document_currency IS INITIAL
      OR lc_local_currency IS INITIAL OR lc_date IS INITIAL ) .
      conversion necessary with lc_date -> Normally not possible
        CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
          EXPORTING
            date                 = lc_date
            foreign_amount       = lc_document_value
            foreign_currency     = lc_document_currency
            local_currency       = lc_local_currency
            rate                 = lc_rate_dec
          IMPORTING
          EXCHANGE_RATE        =
            local_amount         = lc_local_value
          EXCEPTIONS
            NO_RATE_FOUND        = 1
            OVERFLOW             = 2
            NO_FACTORS_FOUND     = 3
            NO_SPREAD_FOUND      = 4
            DERIVED_2_TIMES      = 5.
        IF sy-subrc NE 0.
      message a802 with lc_date lc_document_currency lc_local_currency
                        sy-subrc.
        ENDIF.
      ELSE.
      if conversion not possible -> assign target values
        lc_local_value = lc_document_value.
        lc_local_currency = lc_document_currency.
      ENDIF.
    ENDFORM.

    HI,
    Thanks so much the explanations.
    I just verified again on our dev system and the update rule for 0GR_QTY (Actual goods receipt quantity) include the following:
        perFORM QUANTITY_CONVERT
           USING    COMM_STRUCTURE-CPQUAOU
                    COMM_STRUCTURE-po_UNIT
                    COMM_STRUCTURE-base_uom
                    COMM_STRUCTURE-numerator
                    COMM_STRUCTURE-denomintr
           CHANGING RESULT
    Now, in the include, I also found:
    FORM QUANTITY_CONVERT
      USING    QC_SOURCE_VALUE
               QC_SOURCE_UNIT
               VALUE(QC_TARGET_UNIT)
               QC_UMREZ
               QC_UMREN
      CHANGING QC_TARGET_VALUE.
    i.  Does it mean it actually does quantity conversion?
    ii. If you have access to the INCLUDE I will appreciate some hints on what the subroutine QUANTITY_CONVERT is doing. It does not appear do to be saying anything about quantity conversion; but it is supposed to be doing something with the parameters being passed from the update routine.
    iii. In your response to #5, after all the computation in the INCLUDE, what comes back to the Update rule  i.e. what comes back to become the value of 0GR_QTY?
    Is it the u201CRESULT.u201D in the update rule or u201CQC_TARGET_VALUE.u201D in the subroutine in the INCLUDE.
    iv. So, am to create an Update rule for 0PSTNG_DATE and the source is BUDAT; and I need to write a routine using the include INCLUDE RS_BCT_MM_UPDATE_RULES.
    I looked through the INCLUDE and identified all the subroutines in this INCLUDE as follows:
    QUANTITY_CONVERT
    LOC_CURR_CONVERT
    GET_WEEK
    WEEK_DAY
    QUARTER_DAY
    --Does it mean that to use this subroutine, I can only use the USING parameters of one of these listed subroutines?
    --Also, does it mean that because 0PSTNG_DATE is a date, I can only use one of
    GET_WEEK
    WEEK_DAY
    QUARTER_DAY
    --Or, are there other includes to be used for 0PSTNG_DATE
    Thanks

  • Everything is so slow after I updated to 10.7.2...Help:(

    I have a Macbook pro 15''.. Bought this Aug.
    Everything is so slow after I updated to 10.7.2 .....
    Especially now it takes me 1 min to turn on my laptop... which used need only 10 sec. So does Turn off...before update it is 2 sec, now it is 30 sec...
    What should I do to make it faster?
    Thanks.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
    Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search.
    Step 1
    Copy or drag -- do not type -- the line below into the Terminal window, then press return:
    kextstat -kl | awk ' !/apple/ { print $6 $7 } '
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Step 3
    launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
    Step 4
    ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
    Remember, this is all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
    You can then quit Terminal.

  • Help Needed on Read/Modify Line Statement

    Hi,
    I am writing a report which is having a check box as first column, followed by sales data. I am giving F4 Key to user to Select ALL the check box. I have used Modify Line to do this, but it is not working for me.
    Here is the pseudo code which i am using.
    Report <report name>.
    data cb1 value SPACE.
    Write :/ cb1 as CHECKBOX, 'X'.
    Write :/ cb1 as CHECKBOX, 'Y'.
    Write :/ cb1 as CHECKBOX, 'Z'.
    AT PF04.
       DO 3 times.
          MODIFY LINE sy-index field value cb1 from 'X'.
       ENDDO.
    This is not working and giving weird results.
    I tried the following things too.
    Trial a:
    cb1 = 'X'.
    modify line sy-index field value cb1.
    Trial b:
    modify line sy-index of current page value cb1 from 'X'.
    Trial c:
    read line sy-index....
    modify line sy-index..
    But none of them were working.
    Please let me know if my approach to select all check box is correct. Is there any alternate way to select all the checkbox in the list?..What is wrong with my modify line statement.
    Regards
    Mitesh

    Hi Anand,
    Thanks for throwing a light on the "Read Statement". This cleared up my concept of modify line too.
    When I dont use Read Line, the output will be:
    Checked X
    Checked X
    Checked X
    Let me try to answer the question as "Why it is happening".Correct me if i am wrong as i am only 15 days Old for ABAP ;-((.
    Here is how I will now defining modify line statement. Modify Line Statement modify the current line or line number n with the value of sy-lisel. With Field Addition in Modify line, you change the content of sy-lisel.
    So in our case, the sy-lisel value is (Checked,'X').
    So if we dont use read line, only first column will get updated , whereas second field will remain in the sy-lisel.
    So to get the value of other lines, we use read line. This will fill up the sy-lisel with the the line content of sy-index and so modify will work.
    So, if we are using AT LINE-SELECTION event to select line, in that case, there is no need to do a read line as sy-lisel is already in the buffer.
    Please correct me if i am wrong.
    Regards
    Mitesh

  • Indesign CC CS6 is really slow today. Updates have been done. Do you have a solution?

    Indesign CC CS6 is really slow today. Updates have been done. Do you have a solution?

    Adobe has absolutely acknowledged issues for some users with CC and there are well over 700,000 paid CC subscribers. I suggest you check your facts before posting complete nonsense.
    Where has this been acknowledged? If so it is still not fixed.
    CS6 sold 14.5 million copies. An advertisement email from Adobe stating: "Join the over 650,000 creative professionals who’ve already made the switch to Creative Cloud* and get everything you need to create, collaborate, and publish all in one place. And with a Creative Cloud membership, you’ll always have the most advanced design features the minute they become available. At the Q2 earnings Adobe stated 770,000 subscribers. Why do the state 120,000 less? Did 120,000 early adopters not continue the subscription?"
    That may be more that a few but hardly worth risking having access to the latest new bugs the minute they become available.

  • Could someone please look at my line stats.

    Thank you for looking.
    Had a engineer out and checked line and changed my pear on telegraph pole.Lol. Plus went to local exchage (erm), and there is nothing more they can do(line wise). But my download speed is so slow. 360 and wii games keep dropping out and you tube keeps buffing. Not happy.
    ADSL line status Connection information
    Line state
    Connected
    Connection time
    0 days, 1:17:41
    Downstream
    7,712 Kbps
    Upstream
    448 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.1
    Latency type
    Fast
    Noise margin (Down/Up)
    6.7 dB / 25.0 dB
    Line attenuation (Down/Up)
    38.0 dB / 24.0 dB
    Output power (Down/Up)
    19.7 dBm / 11.9 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 0
    CRC Errors (Down/Up)
    136 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    1892
    And speed test
    <script type="text/javascript">// paintProgressAndMessageOnBar(100,"The test has successfully completed"); // </script> Test1 comprises of Best Effort Test: -provides background information.
    Download  Speed
    5775 Kbps
    0 Kbps
    7150 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 5775 Kbps
     For your connection, the acceptable range of speeds is 600-7150 Kbps.
     Additional Information:
     Your DSL Connection Rate :7712 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
     IP Profile for your line is - 6500 Kbps

    the stats your showing there mean the problem isnt with your connection.
    most likley there is a problem with routing to the servers and a general problem with the iplayer being over subscribed, unless your on option 1 or 2 in which case your probably gettign throttled a lot.
    hopefully bt will fix the dns problem soon and things will get better

  • [Feature Request] DSL line stats & manual IP settings for PPPoE/PPPoA

    After having replaced a Funkwerk R232aw with a Cisco SRP547W I noticed that the software (we're on 1.2.4(003) from Jan 2012) on the Cisco device omits very basic functionality which is even availabe in the cheapest of consumer routers. Therefore I make this feature request in the hope that this may be read by someone from Cisco who could forward this to the development team for consideration for the next software update.
    What's missing:
    - There are only very basic DSL line stats available, and no DSL line uptime. Only if the URL is changed manually to https://[router ip]/dsldiag.asp then a hidden config page with full line stats including framing errors (unfortunately still without uptime!) becomes available. It is not described in the documentation how to find this page, and I only found out by coincidence. Full DSL line stats including error counter data and line uptime are crucial when diagnosing performance and reliability problems on the ADSL side, and really *NEED* to be available from the menue! Considering that the page already exists (albeit hidden), it shouldn't be too dificult for Cisco to include it into the menue structure and add line uptime information.
    - PPPoE and PPPoA apparently are DHCP only. This is a major problem for someone with a static IP and a provider which doesn't do DHCP. It also prevents someone from avoiding using the DHCP-assigned provider DNS servers if the SRP should remain as DNS proxy. As with DSL line stats, being able to set the IP config manually for PPPoE and PPPoA is a very basic functionality that really should also be available in the SRP.
    I am also aware that Cisco aims the SRP (Services Ready Platforms) Series at service providers which then give them to their customers preconfigured, and them the lack of the aforementioned functions may indeed be of no concern. However, fact is that the SRP is also sold as an individual product on the open market, to be used with any ISP. And in this environment this functionality is really important. Therefore it would be great if Cisco could include them into the next firmware release for the SRP500 series.
    What else:
    - Password Complexity Settings: doesn't say what is meant by "complexity" (even if disabled short passwords are not allowed). When clicking on "help" to find out, I get the Troubleshooting FAQ telling me what to do if WiFi doesn't work or there is no dial tone. The help should be fixed to point to the right page, and maybe a small line explaining what is meant by complexity could be added.
    - Log Viewer: would be nice if downloaded logs would come with the .txt ending
    That's all ;-)

    Hello Ben, thanks for the well written post.
    To make a formal feature request, we will need to create a service request (case number). I will be happy to do this for you. If you could please gather documentation for me and make a zip package which contains-
    Firmware version
    When is the last time the unit has been factory reset
    Router config file
    Basic topology
    Who is your ISP
    What service you're using (what kind of dsl)
    Summary of problem description
    Screen shot of where you'd like to see the feature implemented
    Relevant contact info including name, business, telephone, email address
    Any additional information you feel helpful to make your point
    Please send me an email with your Cisco ID and device serial number with this packaged. I will then create a service request and submit for review. My email is [email protected]
    In the mean time, here is a great post
    https://supportforums.cisco.com/message/3717617
    -Tom
    Please rate helpful posts

  • IOS 7 iPhone 4 slow to refresh/update data

    Apps like Weather, Email, and Notifications seem to have slowed down in updating/refreshing data.  When I check notification center, the weather data is usually hours old.  If I open the weather app it also has the older data but quickly refreshes.  If I go back to Notification Center, it takes several more minutes to update.  If I read emails on another device, they are still marked an unread on iPhone until I open the app or manually refresh.  Anyone else having these issues?  Could it be just that the servers are so stressed from upgrades that some push notifications have slowed down?
    Before you ask, current settings:
    Backgroud App Refresh: On (enabled for weather)
    Location Services: ON (enabled for weather)
    Notifications:  All services enabled in Today View
    Mail - Fetch New Data: Push
    If email is not a Push account, set to Fetch Every 15 Minutes

    Figured it out.
    The photos that I thought were on the phone where in the cloud, so there wasnt actually a photo folder created yet in the camera.
    Took a picture, reconnected phone and viola, there it was.

  • NI-DAQmx Base - "Read or Write task without first setting line states"

    I am writing an application to interface with the USB-6501 hardware platform. In my application, I am first initializing all the lines on each digital port to be either read or write lines. After these lines have been initialized to the correct state, I would like to write data to a specific port, or read data from that port, without having to again define the line states (i.e. I'd like to write data to the port based on the already configured lines).
    Here's how I approach the problem. On initialization, my program will create a DAQmxBase task which will set the lines I specify as "Write" lines for port0, following this is another task which specifically sets the "Read" lines for port0. When I create a task to simply read or write data to a port (without again defining which lines are write and which lines are read) I receive the error "-200428 - Value passed to the Task/Channels In control is invalid.". If I define the read and write lines as a step in the same task which reads or writes data (respectively), the process seems to work ok.
    Can anybody offer any insight to whether or not I should be able to accomplish this task using this approach?
    Thank you for your help.

    Hello DarkCloud. Thank you for contacting National Instruments. If you create a task in the DAQmx Base Configuration Utility and set the direction of the line, you don't need to reset the direction in LabVIEW. There are some examples of how to do this at Start>>All Programs>>National Instruments>>NI-DAQmx Base>>Examples>>LabVIEW 7.1. Open the static example for DIO>>Write Dig Port. Please let me know if you have any questions. Have a great day!
    Marni S.
    National Instruments

  • Remote Desktop Initiating Command Line Software Update to local server

    Hi there-
    We have a Software Update server (Mac OS X 10.4.4 Server) that works great. I'm trying to initiate a software update on a lab of 20 computers with ARD through the "send unix command." Now, because it's a software update, you need admin privs to install the software.
    I'm initiating the command line software update as root so that it will install without prompting for a password (and not having to type one in 20 times).
    However, as root user or any other admin the Open Directory setting to have the computer point at our local software update server is ignored. Is there any way around this other than not allowing administrators ignore management settings?
    There doesn't seem to be any way to tell the software update command line utility what server to look at.
    Any ideas?

    I had the same problem and came up with this solution. Create this text file and then copy it to /Library/Managed Preferences/root/com.apple.SoftwareUpdate.plist on each workstation. Replace the <<your server here>> with the address of your actual software update server.
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>CatalogURL</key>
    <string>http://<<your server here>>:8088/</string>
    </dict>
    </plist>

  • Xi JDBC Adapter - Query SQL Statement & Update SQL Statement

    Hi!
    I configure the JDBC adapter sender (XI) to take data from Oracle database.
    I set the Query and Update SQL Statement in the Processing parameters of the communication channel in this way:
    Query SQL Statement :
    SELECT * FROM XI_TABLE WHERE STATUS = 'WAIT' ORDER BY ROW_NUM
    Update SQL Statement :
    UPDATE XI_TABLE SET STATUS = 'DONE', DATE = SYSDATE WHERE STATUS = 'WAIT'
    My question is :
    If a new record with the field STATUS = 'WAIT' is added to the table (xi_table) during the time between the execution of the query statement and the start of the update statement, what will happen to that record during the update?
    There is a way to avoid the update of that record? or to pass to the update statement only the record selected in the query statement?
    Please, may you give me some example?
    Thanks,
    Francesco

    hi,
    did you check "Isolation Level for Transaction"
    for the sender jdbc adapter?
    http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
    Regards,
    michal

  • Based on single Doc number Multiple line items update to in single Z database table

    Dear Frds,
    Based on single Doc number Multiple line items update to database table
    Example : Doc Num: Janu
    If users are using different doc number again the line items are modifying and replacing to new document Number . Pls Help me Screen attached as
    Like CS01 Transaction

    Dear Frds,
    Based on single Doc number Multiple line items update to database table
    Example : Doc Num: Janu
    If users are using different doc number again the line items are modifying and replacing to new document Number . Pls Help me Screen attached as
    Like CS01 Transaction

  • What are my line stats like. Good or bad?

    Hi there,
    I've just recently changed ISP to BT, within the last couple of days.
    I know I'm still probably in my line training state.
    Using the supplied BT Home Hub 3.
    My stats so far are:
    ADSL Line Status
    Line state:    Connected
    Connection time:    2 days, 01:46:58
    Downstream:    2.531 Mbps
    Upstream:    448 Kbps
    ADSL Settings:
    VPI/VCI:    0/38
    Type:    PPPoA
    Modulation:    G.992.1 Annex A
    Latency type:    Interleaved
    Noise margin (Down/Up):    6.6 dB / 24.0 dB
    Line attenuation (Down/Up):    45.4 dB / 29.0 dB
    Output power (Down/Up):    18.1 dBm / 12.3 dBm
    FEC Events (Down/Up):    369092 / 122
    CRC Events (Down/Up):    1961 / 90
    BT Speedtester results:
    Download speed achieved: 1793 kbit/s
    DSL connection rate: 2592 kbit/s Down and 448 kbit/s Up
    Upload speed achieved: 308 kbit/s
    I'm hoping to get my Downstream speed around 3 megabit/s or better.
    But so far I'm still lucky if I'm above 2.5 megbit/s.
    As you can see my line has been stable for the first 2 days of connection, not sure if it should have dropped a few times as my line is being trained/tested?
    With the stats I have posted, should I be waiting for a faster connection?
    Or is this all my line can handle?

    I've just got home after a day out and I just noticed my speed (bandwidth) has dropped a little.
    So I logged in to my HH3 and I noticed that it had a different connection time.
    I was at something like 6+ days, but now back down to 0 days and a few hours.
    Q:  Will this have affected my 10 day line training?  So am I back to waiting for another 10 days, before my line speed (hopefully) increases?
    My routers log (when the connection dropped and then back up):
    09:45:11, 27 Jul.    (679519.170000) DSL is up
    09:45:09, 27 Jul.    (679516.850000) DSL noise margin: 24.00 dB upstream, 6.60 dB downstream
    09:45:09, 27 Jul.    (679516.790000) DSL line rate: 448 Kbps upstream, 2496 Kbps downstream
    09:44:41, 27 Jul.    (679488.900000) Server URL: https://pbthdm.bt.motive.com; Connecting as user: ACS username
    09:44:34, 27 Jul.    (679482.610000) DSL is down after 11119 minutes uptime
    09:44:33, 27 Jul.    (679481.290000) PPPoA is down after 11119 minutes uptime
    Nothing of interest found before this, well no reason why it dropped out.
    Thanks in advance.

  • Line Stats Help Please.

    Is there anything wrong with these stats CRC, HEC
    ADSL Line Status
    Connection Information
    Line state:    Connected
    Connection time:    4 days, 19:03:09
    Downstream:    18.93 Mbps
    Upstream:    1.125 Mbps
    ADSL Settings
    VPI/VCI:    0/38
    Type:    PPPoA
    Modulation:    G.992.5 Annex A
    Latency type:    Fast
    Noise margin (Down/Up):    6.6 dB / 7.7 dB
    Line attenuation (Down/Up):    20.6 dB / 11.7 dB
    Output power (Down/Up):    20.1 dBm / 12.6 dBm
    FEC Events (Down/Up):    0 / 0
    CRC Events (Down/Up):    15223 / 19552
    Loss of Framing (Local/Remote):    0 / 0
    Loss of Signal (Local/Remote):    0 / 0
    Loss of Power (Local/Remote):    0 / 0
    HEC Events (Down/Up):    41372 / 65882
    Error Seconds (Local/Remote):    7151 / 37986

    I'm on a wired connection, but sometimes I just see poor through put.
    Take this speedtest for example, In previous speed test this used to be mostly a solid graph but as you can see the spikes in this test. (Ok things might be more accurate on the speed tests now so it might be a red herring)
    The ping test graphic below shows that everything should be fine but when I ping from the command line I see the variation.
    I was pinging the bbc domain at around 20 ms then I see a spike of three pings with a max of 143 ms
    C:\Users\Philip>ping bbc.co.uk -t
    Pinging bbc.co.uk [212.58.246.104] with 32 bytes of data&colon;
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=29ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=20ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=24ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=24ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=111ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=24ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=143ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=90ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=27ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=24ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=26ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=20ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=23ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=22ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=24ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=24ms TTL=51
    Reply from 212.58.246.104: bytes=32 time=21ms TTL=51
    Ping statistics for 212.58.246.104:
        Packets: Sent = 70, Received = 70, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 20ms, Maximum = 143ms, Average = 26ms

Maybe you are looking for