Slow link detection of profiles

Hi
When I implemented DA I had to stop roaming profiles to keep the logon time short. Unfortunately I have been asked about slow link detection as a solution and found that the DA clients didn't recognise the slow link. From the few posts I saw on
this it "looks" like Slow link detection of profiles is not supported. Can someone tell me if this is the case or is their a work around?
Cheers
Laurie
Cheers Laurie

Hello,
We are experiencing the same problem. Slow link detection however is not an option for us. This is because we still require that the machines are able to process GP updates etc.
Settings which aren't enabled with slow link detection:
The settings that are not downloaded when a slow link is detected include the following:
Disk Quota
Scripts
Folder Redirection
Software Installation
Wireless Network (IEEE 802.11) Policies
Wired Network (IEEE 802.3) Policies
Internet Explorer Maintenance Extension
See if any of these are an issue for you and then try slow link detection.
Another potential cause of the problem is if the profile is still carry old XP profile information. Try creating a user account with roaming profile which has only ever logged onto WIndows 7 or WIndows 8; this article explains it in more detail:
http://social.technet.microsoft.com/Forums/en-US/1c618a22-b48a-43ca-81cc-64836c058207/appdatalocal-and-locallow-following-roaming-profile

Similar Messages

Slow-link detection not working.

Slow-link detection not working.
In our branch office in Ethiopia we are experiencing some issues with the access to mappings. Our main office is located in the Netherlands. The Offices are connected with a VPN site2site solution.
We map a home folder to H:\ (which is working).
We map a Document share to L:\ (which is not working).
We map a Programs share to X:\ (which is not working).
All shares are DFS namespace.
We have set the according GPO which results in the following reg keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\NetCache\SlowLinkParams]
"\\\\DOMAIN.XXX.NL\\dfsdata"="Latency=32000"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Home1"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Home2"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\ConcernData"="Latency=360"
"\\\\DOMAIN.XXX.NL\\dfsdata\\Programs"="Latency=360"
The detection says in the eventvwr (OfflineFiles) says:
Path \\ DOMAIN.XXX.NL \dfsdata\home1 transitioned to slow link with latency = 106 and bandwidth = 270472
So the Homedrive is working.
But when I try to access the DFS root I get:
Windows cannot access "\\DOMAIN.XXX.NL\dfsdata
You do not have permission to access....."
And yes, the user has permission.
So the L-drive and X-drive are not accessible.
How come?

Hi,
>>Slow-link detection not working.
Did we check group policy result to see if the policy setting was applied successfully? We can run command gpresult/v or gpresult/z to collect group policy result.
Besides, instead of just focusing on slow link, this issue may be related to DFS namespace.
Regarding this point, the following blog can be referred to for more information.
Using DFS Namespaces and Offline Files
http://blogs.technet.com/b/filecab/archive/2006/01/19/using-dfs-namespaces-and-offline-files.aspx
Regarding how to troubleshoot DFS namespace problem, the following article and blog can be referred to for more information.
How to troubleshoot Distributed File System Namespace access failures in Windows
http://support.microsoft.com/kb/975440/en-us
TechNet Subscriber Support
If you are TechNet Subscription user and have any feedback on our support quality, please send your feedback here.
Best regards,
Frank Shen

JSPM: Error while detecting start profile for instance with ID _c.

Hi Experts,
we have an error when we start JSPM with message "cannot initialize application data. Error while detecting start profile for instance with ID _c." . Until now nothing has been updated yet. The system can be started up and shut down without any problem. The profiles are found in /usr/sap/PMA/SYS/profile
Our BI system is currently Netweaver 7.0 with SPS14. We plan to update it to SPS20. But when we start JSPM, we have abover error.
could somebody give a help? Thank you very much.
Rongfeng
P.S. the log file DETECT_SYSTEM_PARAMETERS_01.LOG:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!PATTERN[DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5^H#C000995FC0200000000000207BD47BD40004789C01294DB0#1258511336558#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#Java###Initializing JSPM data model...##
#1.5^H#C000995FC0200000000000217BD47BD40004789C01295968#1258511336561#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#Java###Detected profile directory .#1#/usr/sap/PMA/SYS/profile#
#1.5^H#C000995FC0200000000000227BD47BD40004789C0141AFE0#1258511338156#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#Java###Detecting the parameters of the database...##
#1.5^H#C000995FC0200000000000237BD47BD40004789C014205D0#1258511338178#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#Java###Executing command with arguments .#2#dbinfo#/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000247BD47BD40004789C01421570#1258511338182#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#5#com.sap.sdt.dmt.main.DMT#
#1.5^H#C000995FC0200000000000257BD47BD40004789C01421958#1258511338183#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #/opt/IBMJava2-amd64-142/jre/bin/java -cp .:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/sdt_dmt.jar:/oracle/client/10x_64/instantclient/ojdbc14.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jddi.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/opensqlsta.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/frame.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jperflib.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/util.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/opensqlsta.jar:/sapmnt/PMA/global/security/lib/tools/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/tools/iaik_jce.jar:/sapmnt/PMA/global/security/lib/tools/iaik_smime.jar:/sapmnt/PMA/global/security/lib/tools/iaik_jsse.jar:/sapmnt/PMA/global/security/lib/tools/w3c_http.jar:/sapmnt/PMA/global/security/lib/tools/iaik_ssl.jar:/sapmnt/PMA/global/security/lib/engine/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/engine/iaik_jce.jar com.sap.sdt.dmt.main.DMT -rootdir=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM -descriptor=csrt29_PMA -logfile=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01.LOG dbinfo /usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000267BD47BD40004789C01422128#1258511338185#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01_01.OUT#
#1.5^H#C000995FC0200000000000277BD47BD40004789C01424838#1258511338195#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#Java###Process ID has been started.#1#5#
#1.5^H#C000995FC0200000000000287BD47BD40004789C014253F0#1258511338198#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#Java###Waiting for process ID , name to finish.#2#5#java#
#1.5^H#C000995FC0200000000000297BD47BD40004789C017402B0#1258511341454#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#Java###Process ID , name has been finished, exit code .#3#5#java#0#
#1.5^H#C000995FC02000000000002A7BD47BD40004789C01741638#1258511341459#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#Java###Command has been executed.#1#dbinfo#
#1.5^H#C000995FC02000000000002B7BD47BD40004789C017421F0#1258511341462#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#Java###Detection of the parameters of the database has finished. Database type is , database name is and database version is .#3#ORA#Oracle#10.2.0.2.0#
#1.5^H#C000995FC02000000000002C7BD47BD40004789C01744CE8#1258511341473#/System/Server/Upgrade/JSPM##com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#Java###Parameter has been detected. Parameter value is .#2#/J2EE/StandardSystem/DefaultProfilePath#/usr/sap/PMA/SYS/profile/DEFAULT.PFL#
Sorry, I don't know how to format post
Edited by: Rongfeng Shi on Nov 18, 2009 4:20 AM

Hi Rongfeng,
There is not much information about the error in the log file you have pasted above.
Please repeat the issue and catch the log files once again.
Are you able to open SDM ?
Best Regards
Raghu

Best practice for lots of DP's over slow links

Hi All,
We have an established environment consisting of 1 primary server (with separate SQL server), 10 secondary sites and (potentially) 2000+ sites, each with a DP.
Currently we have all the DP's in place as push DP's with rate limits set between 1% (daytime) and 75% (night time) to throttle the traffic. All but 100 of the sites are on variable links that vary between 2Mb and 16Mb depending on the traffic
needed. The 100 other sites are on very slow links (<1mb).
Network utilisation hardly ever exceeds 50% of the available bandwidth in normal use but can burst to 100% on rare occasions
We are concerned about the load on the primary server when deploying applications to the 2000+ sites, it takes a long time to get the application to all the DP's.
I have been given the task of re-designing the environment to meet the requirements:
SCCM traffic cannot block or affect normal network traffic (financial info etc)
A critical patch to the OS must be deployed as fast as possible to ALL DP's and then to all clients
A large deployment (>1GB) must not block the deployment of smaller but higher priority packages
My reasoning is that if I were to set the 2000+ site DP's to be pull DP's with the 10 secondary sites as content locations (prioritised to the secondary site each DP reports to, then any others) then that would meet points 2 and 3.
Point 1 is the sticky one... Normally I could use rate limits (as now) or pulse mode to limit the bandwidth used between the secondary site and the DP but a pull DP cannot use anything other than BITS.
What would be the settings for setting up BITS?
Where would be the better area? client settings (requires client on the DP) or via GPO?
Any suggestions as to preferred limits to set in BITS?

If your DPs belong to secondary sites, then there is no load on the primary site server to distribute content. Content flows from the site server that the DP belongs to which in this case are secondary site servers.
You will never prevent complete network usage using built-in software facilities. If those are your requirements you should discuss QoS with the network team and/or check out one of the two alternate content providers (and eliminate all or most of your DPs):
Adaptiva OneSite and 1E Nomad.
Jason | http://blog.configmgrftw.com | @jasonsandys

Cannot put links in my profile

If I try to put any kind of link into my profile iChat refuses to publish my profile, I know this is a security fix (a dumb one at that) but is there any way to get around it? My profile is the only publicity my website gets and I need this to work.

Open Adobe Reader | Edit | Preferences | Trust Manager: use the Change Settings button to add the Dropbox URL to the list of trusted sites.

E Recruiting : Race/Gender (EEO Questionnaire) link to candidate profile

Hi All,
When a candidate (external/internal) fills out the EEO questionnaire (Race/Gender) for the first time it should get stored/linked to his profile so that it should not ask him again when he is filling out another job application
Currently there is no such linkage. When the existing candidate comes back to fill another job application the EEO questionnaire comes up blank again for him to fill.
This should not happen, it should show him the existing selections he made earlier and he should be able to change them if required.
Any clue as to how this could be achieved. Appreciate any kind of input.
Thanks.

Well,
the only feasible is a workflow or periodical service which sends out the e-mail.
Adding to the profile is not that easy. The questionnaire step in the application wizard is connected to the process template or questionnaire step in the requisition. So there is some place where you can define the questionnaire for the wizard.
For the profile there is nothing like a process template. So what you would have to do is programming a custom roadmap step which reads the specific EEO questionnaire from a customizing table or a simple application where you define the "profile specific EEO questionnaire".
So that's some kind of requirement which is not just an easy to do out of the box option. It is possible, but a little bit of effort!
The customizing table or application for assigning the EEO template for profile maintenance is needed as well, if you just do the workflow
Best regards
Sebastian

Your Current color settings honor CMYK profiles in linked content but profiles were set to be ignored when document was created

"Your Current color settings honor CMYK profiles in linked content but profiles were set to be ignored when document was created"
I keep receiving this message on my illustrator files. They are linked to a file in Indesign that when saved as a PDF prints the wrong colors. I have been trying to fix this for two days. I have look online for answer in forums and articles and nothing works i am completely burn out, lost and angry Please help. This is a Picture book project that can not to sent to the author in this condition.

Your Illustrator files have images linked in them?
THis message tells you that color management had been set up differently when you created the document. In color management settings you have the choice if color profiles in linked images are ignored (and Illustrator uses just the CMYK numbers) or if those profiles are honored (and Illustrator converts the CMYK numbers according to the image profile and your settings into the Illustrator document's color profile).
What makes the whole thing even more complicated is that you placed the thing into InDesign.
So there might be 4 different color profiles interacting with each other:
1. the linked image's profile
2. the AI document's color profile
3. the InDesign document's color profile
4. The export profile in InDesign.
Is your color management set up and synchronized in Photoshop, Illustrator and InDesign?
Is it possible to place the images directly in InDesign? That is: create vector content in Illustrator and have photos separately? Then combine them in Illustrator?
How do you know they print the wrong colors? Just seeing them on your monitor won't tell you, unless your system is correctly color calibrated.

LACP and Unidirectional Link Detection

All,
Does LACP support unidirectional link detection like PaGP does in desirable mode?

Got it.
Yes, the functionality of LACP is very similar to PAGP excepting that LACP is an IEEE standard.
The following link from IEEE explains the inner-working of the protocol.
www.ieee802.org/3/ad/public/july98/jeffree_070798.pdf
Here's Cisco's explanation of LACP:
Link Aggregation Control Protocol (LACP) is part of an IEEE specification (802.3ad) that allows you to bundle several physical ports together to form a single logical channel. LACP allows a switch to negotiate an automatic bundle by sending LACP packets to the peer. It performs a similar function as Port Aggregation Protocol (PAgP) with Cisco EtherChannel.
Regards,
Sundar

Two sites-slow link-share printer-network share

Hi,
Our school has two campuses. CampusA has 50 uses and campusB has 10 uses.
The two campuses are connected via slow link. Currently, everything (AD(one domain) ,DHCP,NAP,internet) is setup in CampusA When staff(3/4) move from CampusA to CampusB (not that far, ~15 min), their traffic goes via the wireless link and as there
are only 3/4 roaming staff, slow link is OK. CampusB's 10 users traffic also goes via wireless link.
Now, we will have 80 students(all laptops) in 2015 in CampusB. We are using 192.168.4.0/24 subnet and we only have around 80 ips. Each laptop keeps two ips (lan/wireless) as a result we do not have enough ips. I could change the ip to classC(172.16.XX)
but the issue is the slow link.
I guess there will be issues with AD replication, group policy, DHCP, NAP (wireless)!!! Am I right ? Should I create another subnet/domain/two way trust for student- is it a good solution ?
**Student may move from CampusA/B to CampusB/A for various reasons and I need to make sure that they can access all the printers & file-share despite their location (CampusA/CampusB) !!
Hope it is clear.
Please give your opinion.

Hello,
what kind of connection is between the 2 sites?
Slow link for AD is defined with 512kbps.
See configuration within GPOs
http://technet.microsoft.com/en-us/library/cc781031(v=ws.10).aspx and effects
http://support.microsoft.com/kb/227260/en-us
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

Linking my forum profile to the community profile

I'm requesting some possibilities to link my forum profile to my community profile (and to my LAVA profile, that would just be great).
I just realized this because in the statistics of my forum profile, I see a 'blog authored', and while I'm bloging on the communities, this isn't reflected.
After some more thoughts, people like me donate a lot of (unpaid) time to make NI products better. Our participation in the forums and the community could be some cheap way to pay it back to us. If a potential employee or contractor is researching about our knownledge, the profiles could be impressive. If we would have linked them better, we could present us in a much broader background (I really do use the different options I have online for different objectives of mine).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

I read your post prior to posting this. I agree that on the long term, a single profile would be cool. But I also like the differences of forums and communities, and having diffrent providers might be the prize you need to pay for this.
I'm more interested in short-term workarounds at the moment. Philosophically I also like to have a cloud identity, so I'm fine with a set of options to interlink my profiles. All the profiles offer some options to link to some web2.0-services (facebook, twitter, icq), the community profile has a field for the forum profile.
I also don't want to just discuss this on a technical level, but in the field of information management. If someone clicks on my profile, what information might this person be intersted in (and which information I want to provide). Well, it wont be a nice woman looking for a data but more likely some other engineer/technican/scientist or someone from a HR department that wants to check my technical expertise in different fields. So for them I would like to display a kind of top-ten charts where I am good at or interested in.
BTW: A personal messanger would be cool for this as well, so I could for example contact someone that was pretty active on the forums for let's say SMTP and directly ask this person if he/she can help my with my own SMTP problem.
I've seen this (some time ago) completley HR related on the joelonsoftware blog, where they where introducing a service (pretty expensive) for HR-departments where they could check the profiles (CVs) against the activity on the stackOverflow.
Don't misunderstand me, I'm not currently looking for a job, I target this with a technical knownledge-sharing intention. If I know that a memeber of the forums has some expertise I need, I'd like to have a look if this person hasn't founded a community for exactly this topic before asking.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Linking my Contact Profile with my BBM Profile...

Just bought a new Bold 9700 and loving it.
I managed to create multiple Contacts Profiles, BBM Profiles, and link it all to Facebook.
I have my own personal profiles which, at one point, were linked to my Facebook profile and were using my Facebook profile picture.
Subsequently I decided to change my BBM profile pic to a custom one, didn't like it, and wanted it changed back to my Facebook profile pic. I didn't know how to accomplish this, but thought that if I un-linked my BBM profile from my Contacts profile (which was still using by FB profile pic) and then linked them again then my BBM profile pic would automatically reset to my FB pic.
However, I cannot, for the life of me, figure out how to connect or link or whatever my Contact Profile with my BBM Profile.
Can anybody offer some help? I feel like I'm going crazy over here.
Thanks in advance,
Peachey

I read your post prior to posting this. I agree that on the long term, a single profile would be cool. But I also like the differences of forums and communities, and having diffrent providers might be the prize you need to pay for this.
I'm more interested in short-term workarounds at the moment. Philosophically I also like to have a cloud identity, so I'm fine with a set of options to interlink my profiles. All the profiles offer some options to link to some web2.0-services (facebook, twitter, icq), the community profile has a field for the forum profile.
I also don't want to just discuss this on a technical level, but in the field of information management. If someone clicks on my profile, what information might this person be intersted in (and which information I want to provide). Well, it wont be a nice woman looking for a data but more likely some other engineer/technican/scientist or someone from a HR department that wants to check my technical expertise in different fields. So for them I would like to display a kind of top-ten charts where I am good at or interested in.
BTW: A personal messanger would be cool for this as well, so I could for example contact someone that was pretty active on the forums for let's say SMTP and directly ask this person if he/she can help my with my own SMTP problem.
I've seen this (some time ago) completley HR related on the joelonsoftware blog, where they where introducing a service (pretty expensive) for HR-departments where they could check the profiles (CVs) against the activity on the stackOverflow.
Don't misunderstand me, I'm not currently looking for a job, I target this with a technical knownledge-sharing intention. If I know that a memeber of the forums has some expertise I need, I'd like to have a look if this person hasn't founded a community for exactly this topic before asking.
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Link between Qualification Profile QP & Qualification Q

Dear Experts,
Can anyone , tell me what is the relationship between Qualification Profile QP & Qualification Q?
In Profile Matchup & Qualification profile application ,I am getting an error like
" communication failure between backend".
I doubt the link between QP & Q or QP & QK is missing.
Regards
Rizwan S

Hi,
there is a relation between QP and Q => A031
as far as I know there is no relation between QP and Q
Please male sure that this relation is maintained between QP and Q.
BR
Martin Hastik

Link to user-profile

Hi,
I want to create a static user list. From this list I want to be able to view the user profiles.
When creating the user list as a link list, I can't "decrypt" the link to the user profile.
When using a system-user list (like user-list reaching by klicking on a user-group) I don't know which Iview I've to use and I don't know how to tell him which users are in this group.
Please give me some advice.
Thanks Janko Mühling

Hi Sunny,
Unable to guage the prob here. But can give you the step by step process to set a Partner Determination procedure.
1) Define Partner Functions
2) Define Partner Determination Procedure (PDP)
2) Assign Partner Functions to PDP
4) Create Access sequences and Accesses
5) Assign Access sequences to respective Partner Functions
6) Assign PDP to new Transaction created
This will surely help you acheive the requirement.
Please revert if any issues.
Please Reward points if helpful
Regards,
Suji

Pulseaudio doesn't detect all profiles

Hello archlinux forum
I have problems setting up pulseaudio on my new archlinux installation, it fails to detect the full capabilities of my soundcards.
alsa detects every sound card (there are 3: my audigy sound card, my internal intel hda and my graphics card's hdmi), but pulseaudio only registers the inputs of my audigy and the intel hda, so i have no sound without tinkering
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Audigy2 [SB Audigy 2 ZS [SB0350]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]
Subdevices: 32/32
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
Subdevice #8: subdevice #8
Subdevice #9: subdevice #9
Subdevice #10: subdevice #10
Subdevice #11: subdevice #11
Subdevice #12: subdevice #12
Subdevice #13: subdevice #13
Subdevice #14: subdevice #14
Subdevice #15: subdevice #15
Subdevice #16: subdevice #16
Subdevice #17: subdevice #17
Subdevice #18: subdevice #18
Subdevice #19: subdevice #19
Subdevice #20: subdevice #20
Subdevice #21: subdevice #21
Subdevice #22: subdevice #22
Subdevice #23: subdevice #23
Subdevice #24: subdevice #24
Subdevice #25: subdevice #25
Subdevice #26: subdevice #26
Subdevice #27: subdevice #27
Subdevice #28: subdevice #28
Subdevice #29: subdevice #29
Subdevice #30: subdevice #30
Subdevice #31: subdevice #31
card 0: Audigy2 [SB Audigy 2 ZS [SB0350]], device 2: emu10k1 efx [Multichannel Capture/PT Playback]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 0: Audigy2 [SB Audigy 2 ZS [SB0350]], device 3: emu10k1 [Multichannel Playback]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Audigy2 [SB Audigy 2 ZS [SB0350]], device 4: p16v [p16v]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 0: ALC1150 Analog [ALC1150 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: PCH [HDA Intel PCH], device 1: ALC1150 Digital [ALC1150 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 3: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
pacmd list-cards
3 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "3"
alsa.card_name = "HDA NVidia"
alsa.long_card_name = "HDA NVidia at 0xf7080000 irq 17"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card3"
device.bus = "pci"
device.vendor.id = "10de"
device.vendor.name = "NVIDIA Corporation"
device.product.id = "0fba"
device.string = "3"
device.description = "HDA NVidia"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
output:hdmi-stereo-extra1: Digital Stereo (HDMI 2) Output (priority 5200, available: unknown)
output:hdmi-stereo-extra2: Digital Stereo (HDMI 3) Output (priority 5200, available: unknown)
output:hdmi-surround-extra2: Digital Surround 5.1 (HDMI 3) Output (priority 100, available: unknown)
output:hdmi-surround71-extra2: Digital Surround 7.1 (HDMI 3) Output (priority 100, available: unknown)
output:hdmi-stereo-extra3: Digital Stereo (HDMI 4) Output (priority 5200, available: unknown)
output:hdmi-surround-extra3: Digital Surround 5.1 (HDMI 4) Output (priority 100, available: unknown)
output:hdmi-surround71-extra3: Digital Surround 7.1 (HDMI 4) Output (priority 100, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: HDA NVidia Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of HDA NVidia Digital Stereo (HDMI)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-1: HDMI / DisplayPort 2 (priority 5800, latency offset 0 usec, available: yes)
properties:
device.icon_name = "video-display"
device.product.name = "S27C350
hdmi-output-2: HDMI / DisplayPort 3 (priority 5700, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
hdmi-output-3: HDMI / DisplayPort 4 (priority 5600, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 8
properties:
alsa.card = "2"
alsa.card_name = "HDA Intel PCH"
alsa.long_card_name = "HDA Intel PCH at 0xf7230000 irq 31"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:1b.0"
sysfs.path = "/devices/pci0000:00/0000:00:1b.0/sound/card2"
device.bus = "pci"
device.vendor.id = "8086"
device.vendor.name = "Intel Corporation"
device.product.id = "8ca0"
device.product.name = "9 Series Chipset Family HD Audio Controller"
device.form_factor = "internal"
device.string = "2"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <input:analog-stereo>
sources:
alsa_input.pci-0000_00_1b.0.analog-stereo/#1: Built-in Audio Analog Stereo
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
index: 2
name: <alsa_card.pci-0000_04_02.0>
driver: <module-alsa-card.c>
owner module: 9
properties:
alsa.card = "0"
alsa.card_name = "SB Audigy 2 ZS [SB0350]"
alsa.long_card_name = "SB Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at 0xd000, irq 17"
alsa.driver_name = "snd_emu10k1"
device.bus_path = "pci-0000:04:02.0"
sysfs.path = "/devices/pci0000:00/0000:00:1c.3/0000:03:00.0/0000:04:02.0/sound/card0"
device.bus = "pci"
device.vendor.id = "1102"
device.vendor.name = "Creative Labs"
device.product.id = "0004"
device.product.name = "SB Audigy (2 ZS (SB0350))"
device.string = "0"
device.description = "SB Audigy (2 ZS (SB0350))"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:multichannel: Multichannel Input (priority 1, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <input:multichannel>
sources:
alsa_input.pci-0000_04_02.0.multichannel/#2: SB Audigy (2 ZS (SB0350)) Multichannel
sound works if i manually load the modules for my audigy and my intel sound card and set them as defaults, but this stinks because alsa seems to randomly renumber the cards after reboot
I hope for some helpful input
thanks harlequix

Why do you use alsa and pulseaudio at the same time? You could have only pulseaudio and in, for an example, pavucontrol (gui for pulseaudio settings) you could choos which should be first, and rest mark as the spare. If you want to use pulse and alsa (in my case i have this option because i use mainly alsa and pulseaudio only for skype) you could set index for alsa (you have to crate file in /etc/modprobe.d/ and name it alsa-base.conf) and configure pulse to not grab alsa hadrware by editing /etc/pulse/default.pa. Both of these metods are explained on archwiki in pulseaudio and alsa pages.
BTW - about nvidia hdmi. nvidia sound chip use the same driver, that intel hda does:
lspci -vvvv
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device 354e
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
but also something that in my opinion is an front end for it:
[firekage@arch_desktop ~]$ lsmod | grep snd_
snd_hda_codec_hdmi 49263 1
snd_usbmidi_lib 27571 0
snd_rawmidi 26806 1 snd_usbmidi_lib
snd_seq_device 13307 1 snd_rawmidi
snd_hda_intel 26387 2
snd_hda_controller 26857 1 snd_hda_intel
snd_hda_codec 112621 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
snd_ctxfi 104184 3
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88779 6 snd_ctxfi,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 19 snd_ctxfi,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
soundcore 13031 2 snd,snd_hda_codec
usbcore 199382 9 uas,usblp,uvcvideo,usb_storage,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid
[firekage@arch_desktop ~]$
you should see snd_hda_codec_hdmi and _snd_hda_codec.
Last edited by firekage (2015-04-10 22:24:50)

Missing links to my profile

This have been working in the past, but suddenly the links to "My Site" and "My Profile" is missing in the dropdown.
That is only for my root site. I have four subsites where the links shows up and working.
How can the links dissapear from the main site when they are working in subsites?
I have checked all settings that I can think of and didn't find anything odd.

Hi,
According to your post, my understanding is that the “My Site” and “My Profile” link missed.
You can check the below things are properly configured or not,
1) Check your webapplication is associated with your custom user service application.
2) Check your user service application has user permission and it should be properly configured with social features or not.
If the above list is properly configured, you can also check with the following article.
http://sadomovalex.blogspot.com/2011/09/possible-reason-of-missing-my-site-and.html
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Slow link detection of profiles

Similar Messages

Maybe you are looking for