Slow load times for rentals on Apple TV
Out of a clear blue sky, I find that my hard-wired Apple TV takes hours to prepare a movie for watching. I've adjusted the setting in iTunes on the ATV to make sure it defaults to 720p and not 1080p, but the problem still exists.
As an example, the other day I rented a movie and it took over two hours(!) for it to stream enough for me to be able to watch. If I switch to Netflix, I have no problem streaming anything in HD, and the same for Hulu or YouTube. I can also stream material from my MacBook Pro or iMac over my local network and there is no lag whatsoever.
Anyone know what's going on? I'm a bit surprised that a wired Ethernet connection from my ATV to my router is demonstrating this type of behavior.
Thanks for any help anyone can offer!
The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.
Similar Messages
-
We have noticed that lately iTunes U for UW-Whitewater (uww.edu) has been extremely slow, and sometimes even timing out. We have been trying this from various different locations and computers. It appears to be something on the apple side. Has anyone else seen this?
Apple Engineers: Any updates as to what might be going on?Greetings Guys;
We had the same issue yesterday, but the issue seemed to be affecting only the iTunes desktop application. When I would preview using the iPad, load times were normal. The issue seems to have been resolved this morning.
Syd Rodocker
Tennessee State Department of Education -
Slow load time for Quick Time in Mail
Does anyone know why when you receive a video file (like WMV) in Mail that Quick Time takes so long to load it? It did not use to take so long before Snow Leopard. If you click on play before it is loaded, you get audio only. Are there any work arounds or something other than Quick Time that can be used?
From Adobe Support: 17 secs response time is a normal time interval for the "Print Settings" dialogue.
-
Very Slow Load Times for PDF Document
Hi,
I have a PDF document that takes forever to load in preview (on the order of a minute or more). It is eight pages, but when I try to go to the last two pages, each of which has a drawing created by using Autoshapes in Microsoft Word, again they take a minute or more to load.
The document looks to have been created by Acrobat 6 for Windows from a MS Word document. Adobe Reader 7.0.7 on another machine loads the document correctly and speedily (well, as speedily as Adobe Reader can...).
Are there known problems with this type of graphics, MS Word drawings, in a PDF document? Is there any way I can make the document load faster?
Thanks,
Jeff CorbetsHi there
I have a tutorial on this process available at the link below:
Click here to view
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
The website is published, and was working fine. Now when I go to the website homepage > projects > enclosed retail (or any of those project pages) , the text that is supposed to show under the images isn't loading. If I move the mouse around over where the text should be (underneath the image), it reappears, but otherwise stays hidden. How do I get the text to load with the images?
www.jp2architects.comChrome version 33 broke the loading of web fonts (for most websites that use webfonts, not just Muse sites). The symptom of the bug is that some combination of the webfonts used on a page fail to draw on the first paint of the page. Refreshing the page or interacting with it such that items are re-painted by Chrome causes the undrawn text to appear.
Google is very aware of the bug. The Google bug report is here <https://code.google.com/p/chromium/issues/detail?id=336476&q=font&colspec=ID%20Pri%20M%20I teration%20ReleaseBlock%20Cr%20Status%20Owner%20Summary%20OS%20Modified>. From the notes in the bug it appears they're considering folding a fix from their development branch back into 33, presumably so they can do an update prior to their normally scheduled 34 release. -
Does anyone know if there is going to be a firmware update to address the excessi'vely slow load times for DRMed WMA files such as those from Yahoo!Music Unlimited? I have "cleaned up" my Micro and it still takes a WMA file about 7 seconds to load if I just go to a random one, whereas it only takes about -2 seconds for a random MP3 to start playing. This is rather annoying, and I'm just wondering if the code that does the license check is being optimized.
indo87 wrote:
Try to convert the wma to mp3 with a program doesnt take that long.
But it's a DRM'ed file, so it's not legal--unless you use the program I just mentioned in this thread, and it's bleeding-edge enough that the RIAA might sue them anyway.
That delay is perhaps the only problem with 2.20.05; I didn't have quite as much a delay on DRM'ed files with 2..02. (But I also switched from a Napster To Go trial to YMU at the same time, so that might be part of it.) It's not the 30-second delay that the WMP updates in the FAQ post fix, however. -
I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report: 2
Anonymous UUID: 2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController 320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch 3908
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/ -
is anyone still experiencing slow load times on AU sites, apparently this is resolved but I just emptied my cache and checked load times on half dozen sites. Still very slow!
I just loaded http://www.prettypollution.com.au/ and it took 17sec.
Got similar time for http://www.designexperts.com.au/ as well. So, although not very fast it's much better than what you’re seeing. Could be something in the node you’re being routed through. -
Page not found, slow loading times CC Files
Hi,
Two weeks ago I reported that there were CC files problems like 'page not found' errors and slow loading times and pages not even showing anything. Those problems were temporarily resolved but are back as of today.
Please fix this because for me this is not workable and I guess for many others. I've already moved part of my design files away from CC Files and am now reaching the point were I want to abandon this beta-ware altogether.
I'm living in Europe, maybe this gives additional info. Maybe server problems only in this continent?
Thanks for looking into this.
JanSo what product would you advice me to file this bug report under? There is no Creative Cloud Files entree or similar.
I'm not sure I'm taken by Adobe support channels policies. if I tweet a complaint some employee tell me I'll be called back by support. Instead of being called back I get asked per email to report on the community forums, when I post on the forum someone tells me to file a bug report. Ehhh...
Time to move on.
Jan -
Random, excruciatingly slow load time with 7900 Elite small form factor desktops
Hi all, I have approx 300 HP 7900 Elite small form factor machines in my environment that were deployed just over two years ago. from the time of deployment we have experienced on about 50 occasions a random, excruciatingly slow load time that take about one hour for the user to login and open their programs. there has been no rhyme or reason for it, different floors, areas of the building, etc. I searched the forum for similar probs and didn't see one like this, I hope I'm not duplicating efforts from someone else's question... One thing we have noticed is that if we re-boot while it is going through the start-up process, it seems to "make it angry" and will lengthen the overall load time. We use the 32-bit Vista Enterprise OS. This is with a "stock" build, that is to say, our standard corporate build. our security policy does not allow users to install software, by the way. Thanks so much if you can help!
Hi,
How is the issue going? Usually, this error can be caused by missing third-party NIC driver. To solve the issue, we can download the missing network
driver and update the WDS boot image to include it.
In addition to the article provided by Chris, the following blog can also be referred to as reference.
http://askmetricks.blogspot.in/2013/03/solvedwdsclient-error-occurred-while.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this
information.
Best regards,
Frank Shen -
Hi there -
Is there a good way to improve load times for my pages that have Edge animation? I have a very simple slide show set up, and even with the Preloader script, it's taking many seconds to load the page. Any thoughts?
Thanks!Hi Amy,
Did you try the suggestions in this article?
Edge Animate reduces runtime size by 55%, ‘Save to Custom Folders’ feature, new Preloader options, and more! « Adobe Ed…
animation - Improving Performance in Edge Animate - Graphic Design Stack Exchange
Thanks,
Preran -
Increase in Loading time for LV search in 2011
Initially when I loaded LV2011 my quick drop and the search took nearly 5 seconds but now it takes nearly 20 seconds to load so is there any reason for this kind of performance. Also I don't have anyother big software loaded or running in my PC. I have added few toolkits from VI package manager may be that is the reason?.
The best solution is the one you find it by yourselfRavensFan wrote:
In my message in the other thread, I commented that I thought 20 seconds wasn't all that long. But I thought you were commenting on the loading time for LabVIEW itself. That does seem like a long time for any of the internal LabVIEW dialogs to come up.
(Actually, I find several internal dialogs seem to take longer to load the first time then they should including the properties dialog. But not 20 seconds long.)
Hopefully, with this message thread in the LabVIEW forum, others can comment and offer suggestions on how to determine what the issue your having is.
Yes now I have plenty of toolkits ( Thanks for spotting me in the other thread )
Jeff you hit the bullseye. The loading was set as Load palette when needed.
Thanks
The best solution is the one you find it by yourself -
Long loading times for Safari on iPad Air with iOS8
I've had long loading times in Safari sInce upgrading to iOS8 on my iPad Air 128 GB. Are any of you having the same experience?
Sometimes I question myself, how come that iOS being held in beta for over quarter or even over a half a year, and most certainly long enough in alpha, still comes out so much raw and buggy every release? Sometimes it feels like it's only getting worse concerning the debugging.
I wanted to address the HR manager of the Apple Inc. to query him/her about HIS/HER dedication to the overall work being done. Why, the ****, does Safari get slow, why, the ****, is it unpredictable to define whether a sound stream in Safari's tab will end upon tab closure or not. Morever, why do iPhone iMessages fail to mark a message or a chain as a read one even thought you just really did it. Beyond that miriad of similar questions I have just another three, since when is it official Apple support position to advise you to wipe out your device and install everything back from iTunes, not the cloud? But what is more important, how come that support representative tells you first to back up your buggy iPad, wipe it out and restore from that backup both with iTunes? Finally, we all know how Apple does cherish it's developers, can somebody tell me how, for heavens sake, this website ever possible to exist then — Texts From Xcode?
I don't want neither need to mention that switching between tabs in iOS7 (I have had no chance to test it in iOS8) in Safari never gave you any sure answer whether your tab will be reloaded when you get back or not: whether have you copy any post before leaving, to paste back on return or not.
After all I do still love Apple, I do love people's ideas. I do love the overall outcome, but I want to tell Mr. Cook one phrase I heard when I used to be a head of a department in a medium size company and had to deal with continuous fails of the personnel and most often ended up doing much things myself, it was not the exact situation as with Apple although I hope you can trace a path: If a manager has to do anything besides managing he or she failed to manage one major issue — the personnel one. -
Slow loading time on my Website
I just installed iWeb last night, and went about building a practice site. I'm finding that loading times are EXTREMELY slow.
http://www.brianutter.net
I've tried to reduce the size on some of my images by exporting from iPhoto and limiting pixel width, as you can see the site is still super slow. I'm wondering if other folks have experience this and have any helpful tips.
Thanks!
PowerBook G4, 1.5, 1gig Mac OS X (10.4.7)If you use command-shift-4, everything in that selected area gets lifted. In the case of the red image, you grab the image, it's reflection AND the white background that's showing through the reflection. If you convert this image to a .jpg and place it over a white background, there's effectively very little difference but you realize a great change in file size.
Change the color of the page's background, and you see the difference immediately. The reflection loses it effect. Instead of being reflected over black as it would be if it were a .png, it still carries the white reflection since that's the color you lifted from the screen capture. You'd have to take the original file, reflect it, and command-shift-4 to copy a new image with the correct colored background. It's not just a white box, it's whatever color box your current background is. This is an old web trick used for when you needed the high quality color of .jpg and the transparency of a .gif. You just created all your graphics as .jpg's such that they give the illusion of having degrees of transparency (like with iWeb's reflections and shadows). Here's an image that is an example of this.
http://images.apple.com/ilife/iweb/images/overview20060111.jpg
the page it's from
http://www.apple.com/ilife/iweb/
Drop that image on any background other than white to see what I mean by "white boxes around images"
On your pages, you've composited the entire background as one big .jpg, so it doesn't apply. This one is particularly nice.
http://web.mac.com/jwtseng/iWeb/kate/Images/puttputt.jpg
Make the .jpg match the page background, and it doesn't require a series of .png's! -
My imac now takes more than 1 minute to boot. Most of the time is spent on the gray screen. It used to be under 20 seconds.
I have tried disabling all login items as well as moving launch daemons in /Users/name/Library/LaunchAgents, /Library/LaunchAgents and /Library/LaunchDaemons. This did not help.
I have reset the PRAM and SMC, but no change either.
Finally, I removed all usb cables as well as the ethernet cable to see if this was creating the slow boot time, but again, no significant change in boot time.
I have used onyx to clean all caches, and verified the smart status as well as the structure of the volume. I also repaired permissions and executed maintenance scripts. No change.
I have done a verbose boot, and attached to this message is the generated log file. If anyone could take a look at this and let me know if there is anything wrong, I'd much appreciate it. If there's anything else I can try, do let me know as well.
Thank you.
PMAP: PCID enabled
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
vm_page_bootstrap: 2993651 free pages and 135693 wired pages
kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
zone leak detection enabled
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 74
TSC Deadline Timer supported and enabled
corecrypto kext started!
Running kernel space in FIPS MODE
Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
corecrypto.kext FIPS integrity POST test passed!
corecrypto.kext FIPS AES CBC POST test passed!
corecrypto.kext FIPS TDES CBC POST test passed!
corecrypto.kext FIPS AES ECB AESNI POST test passed!
corecrypto.kext FIPS AES XTS AESNI POST test passed!
corecrypto.kext FIPS SHA POST test passed!
corecrypto.kext FIPS HMAC POST test passed!
corecrypto.kext FIPS ECDSA POST test passed!
corecrypto.kext FIPS DRBG POST test passed!
corecrypto.kext FIPS POST passed!
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5]
PFM64 (36 cpu) 0xf80000000, 0x80000000
AppleIntelCPUPowerManagement: Turbo Ratios 1234
AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
[ PCI configuration begin ]
console relocated to 0xfc0010000
PCI configuration changed (bridge=16 device=3 cardbus=0)
[ PCI configuration end, bridges 12 devices 17 ]
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
rooting via boot-uuid from /chosen: D1154437-384E-377D-B73C-B36D1F5FFEF2
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
AppleIntelCPUPowerManagementClient: ready
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST32000541AS Media/IOGUIDPartitionScheme/Customer@2
BSD root: disk0s2, major 1, minor 3
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe918aca; max speed s800.
Kernel is LP64
USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
1.166964: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
1.172754: Atheros: mac 448.3 phy 5.10 radio 0.0
1.173497: Use hw queue 0 for WME_AC_BE traffic
1.174226: Use hw queue 1 for WME_AC_BK traffic
1.174952: Use hw queue 2 for WME_AC_VI traffic
1.175678: Use hw queue 3 for WME_AC_VO traffic
1.176404: Use hw queue 8 for CAB traffic
1.177038: Use hw queue 9 for beacons
1.177707: wlan_vap_create : enter. devhandle=0x47ddf658, opmode=IEEE80211_M_STA, flags=0x1
1.179128: wlan_vap_create : exit. devhandle=0x47ddf658, opmode=IEEE80211_M_STA, flags=0x1.
1.180602: start[1012] sc->sc_inuse_cnt is at offset: 203c, sizeof(_sc->sc_ic) is 25f0
USBMSC Identifier (non-unique): 2008102301130 0x781 0xb7bd 0x1804
Waiting for DSMOS...
macx_swapon SUCCESS
BCM5701Enet: Ethernet address c8:2a:14:28:9d:b1
AirPort_AtherosNewma40: Ethernet address e4:ce:8f:56:8f:98
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
IO80211Interface::efiNVRAMPublished():
AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff8029be9000
AtherosNewma40P2PInterface::init() <p2p> role 1
Previous Shutdown Cause: 5
IOBluetoothUSBDFU::probe
[IOBluetoothHCIController][start] -- completed
IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
[BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
[AGPM Controller] build GPUDict by Vendor1002Device6720
DSMOS has arrived
[IOBluetoothHCIController::setConfigState] calling registerService
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,4de1,0000]
Ethernet [AppleBCM5701Ethernet]: Link down on en0
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,4de1,0000]
AirPort: Link Down on en1. Reason 1 (Unspecified).
en1::IO80211Interface::postMessage bssid changed
virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
[ffffff8029bd1400][BNBMouseDevice::init][75.15] init is complete
[ffffff8029bd1400][BNBMouseDevice::handleStart][75.15] returning 1
[ffffff802a661c00][AppleMultitouchHIDEventDriver::start] entered
34.450553: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
34.450568: switchVap from 1 to 1
[ffffff802ab2cc00][AppleMultitouchDevice::start] entered
CODE SIGNING: cs_invalid_page(0x1000): p=206[GoogleSoftwareUp] clearing CS_VALID
CODE SIGNING: cs_invalid_page(0x1000): p=274[ksadmin] clearing CS_VALID
utun_ctl_connect: creating interface utun0
CODE SIGNING: cs_invalid_page(0x1000): p=298[ksadmin] clearing CS_VALID
/drv/ HypVtx.c:186 CPU is Intel
/drv/ HypLowCache.c:193 Low cache initialized (106560 kB for 24 VMs on 12288 MB)
/drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0xffffff816f24a000 ver 0x15
/drv/ HypVtd.c:3941 [vtdInit]
/drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
/drv/ HypSMBios.c:54 Failed to find SMBios entry point
/drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
/drv/ HypModule.c:194 Parallels Hypervisor 7.0.15106.786747 loaded.
/prl_hid/ Parallels HID Helper started.
com.parallels.kext.prlnet 7.0.15106.786747 has started.
com.parallels.kext.vnic 7.0.15106.786747 has started.
Sandbox: sandboxd(338) deny mach-lookup com.apple.coresymbolicationd
com_parallels_kext_prl_vnic: created vnic0
com_parallels_kext_prl_vnic: created vnic1
vnic0: promiscuous mode enable failed
vnic1: promiscuous mode enable failed
/drv/ HypIoctls.c:779 Ioctl VT-d status: 0Sorry for my late reply, I didn't have access to the computer.
I tried a newly created auto-login user account, but it didn't make a difference. The time between restarting and a cold start is also about the same.
Anyway, you were right these messages are also in the console log with timestamps. Found that with a different command.
Here is that new log:
Mar 27 15:30:34 localhost kernel[0]: PMAP: PCID enabled
Mar 27 15:30:34 localhost kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Mar 27 15:30:34 localhost kernel[0]: vm_page_bootstrap: 3029947 free pages and 99397 wired pages
Mar 27 15:30:34 localhost kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
Mar 27 15:30:34 localhost kernel[0]: zone leak detection enabled
Mar 27 15:30:34 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 27 15:30:34 localhost kernel[0]: standard background quantum is 2500 us
Mar 27 15:30:34 localhost kernel[0]: mig_table_max_displ = 74
Mar 27 15:30:34 localhost kernel[0]: TSC Deadline Timer supported and enabled
Mar 27 15:30:34 localhost kernel[0]: corecrypto kext started!
Mar 27 15:30:34 localhost kernel[0]: Running kernel space in FIPS MODE
Mar 27 15:30:34 localhost kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:30:34 localhost kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS integrity POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS SHA POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
Mar 27 15:30:34 localhost kernel[0]: corecrypto.kext FIPS POST passed!
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Mar 27 15:30:34 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Mar 27 15:30:34 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 27 15:30:34 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 27 15:30:34 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 27 15:30:34 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 27 15:30:34 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 27 15:30:34 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 27 15:30:34 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 27 15:30:34 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 27 15:30:34 localhost kernel[0]: MAC Framework successfully initialized
Mar 27 15:30:34 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 27 15:30:34 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 27 15:30:34 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5]
Mar 27 15:30:34 localhost kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
Mar 27 15:30:34 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1234
Mar 27 15:30:34 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
Mar 27 15:30:34 localhost kernel[0]: [ PCI configuration begin ]
Mar 27 15:30:34 localhost kernel[0]: console relocated to 0xfc0010000
Mar 27 15:30:34 localhost kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
Mar 27 15:30:34 localhost kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
Mar 27 15:30:34 localhost kernel[0]: Thunderbolt runtime power conservation disabled.
Mar 27 15:30:34 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
Mar 27 15:30:34 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 27 15:30:34 localhost kernel[0]: rooting via boot-uuid from /chosen: D1154437-384E-377D-B73C-B36D1F5FFEF2
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 27 15:30:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 27 15:30:34 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 27 15:30:34 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 27 15:30:34 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST32000541AS Media/IOGUIDPartitionScheme/Customer@2
Mar 27 15:30:34 localhost kernel[0]: BSD root: disk0s2, major 1, minor 2
Mar 27 15:30:34 localhost kernel[0]: Kernel is LP64
Mar 27 15:30:34 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe918aca; max speed s800.
Mar 27 15:30:34 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
Mar 27 15:30:34 localhost kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:30:34 localhost kernel[0]: 1.121155: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:30:34 localhost kernel[0]: 1.126950: Atheros: mac 448.3 phy 1.8 radio 0.0
Mar 27 15:30:34 localhost kernel[0]: 1.127693: Use hw queue 0 for WME_AC_BE traffic
Mar 27 15:30:34 localhost kernel[0]: 1.128432: Use hw queue 1 for WME_AC_BK traffic
Mar 27 15:30:34 localhost kernel[0]: 1.129173: Use hw queue 2 for WME_AC_VI traffic
Mar 27 15:30:34 localhost kernel[0]: 1.129913: Use hw queue 3 for WME_AC_VO traffic
Mar 27 15:30:34 localhost kernel[0]: 1.130651: Use hw queue 8 for CAB traffic
Mar 27 15:30:34 localhost kernel[0]: 1.131296: Use hw queue 9 for beacons
Mar 27 15:30:34 localhost kernel[0]: 1.131934: wlan_vap_create : enter. devhandle=0x3f118658, opmode=IEEE80211_M_STA, flags=0x1
Mar 27 15:30:34 localhost kernel[0]: 1.133383: wlan_vap_create : exit. devhandle=0x3f118658, opmode=IEEE80211_M_STA, flags=0x1.
Mar 27 15:30:34 localhost kernel[0]: USBMSC Identifier (non-unique): 2008102301130 0x781 0xb7bd 0x1804
Mar 27 15:30:35 localhost kernel[0]: macx_swapon SUCCESS
Mar 27 15:30:35 localhost kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:28:9d:b1
Mar 27 15:30:35 localhost kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:56:8f:98
Mar 27 15:30:35 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Mar 27 15:30:35 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Mar 27 15:30:36 localhost kernel[0]: Waiting for DSMOS...
Mar 27 15:30:38 localhost kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff802079d000
Mar 27 15:30:38 localhost kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
Mar 27 15:30:38 localhost kernel[0]: IOBluetoothUSBDFU::probe
Mar 27 15:30:38 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
Mar 27 15:30:38 localhost kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Mar 27 15:30:38 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Mar 27 15:30:38 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Mar 27 15:30:38 localhost kernel[0]: Previous Shutdown Cause: 5
Mar 27 15:30:38 iMac-van-wesley kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
Mar 27 15:30:38 iMac-van-wesley kernel[0]: DSMOS has arrived
Mar 27 15:30:38 iMac-van-wesley kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
Mar 27 15:30:38 iMac-van-wesley kernel[0]: en1::IO80211Interface::postMessage bssid changed
Mar 27 15:30:39 iMac-van-wesley kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
Mar 27 15:30:40 iMac-van-wesley kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Mar 27 15:30:41 iMac-van-wesley kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,4de1,0000]
Mar 27 15:30:42 iMac-van-wesley kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [BNBMouseDevice::init][75.19] init is complete
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
Mar 27 15:30:46 iMac-van-wesley kernel[0]: [AppleMultitouchDevice::start] entered
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypVtx.c:186 CPU is Intel
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypLowCache.c:193 Low cache initialized (106560 kB for 24 VMs on 12288 MB)
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0xffffff819bf36000 ver 0x15
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3941 [vtdInit]
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
Mar 27 15:30:47 iMac-van-wesley kernel[0]: /drv/ HypModule.c:194 Parallels Hypervisor 7.0.15106.786747 loaded.
Mar 27 15:30:51 iMac-van-wesley kernel[0]: /prl_hid/ Parallels HID Helper started.
Mar 27 15:30:53 iMac-van-wesley kernel[0]: com.parallels.kext.prlnet 7.0.15106.786747 has started.
Mar 27 15:30:55 iMac-van-wesley kernel[0]: com.parallels.kext.vnic 7.0.15106.786747 has started.
Mar 27 15:30:56 iMac-van-wesley kernel[0]: 37.311866: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Mar 27 15:30:56 iMac-van-wesley kernel[0]: 37.311877: switchVap from 1 to 1
Mar 27 15:30:56 iMac-van-wesley kernel[0]: 37.581056: performCountryCodeOperation: Not connected, scan in progress[0]
Mar 27 15:30:56 iMac-van-wesley kernel[0]: en1: 802.11d country code set to 'BE '.
Mar 27 15:30:56 iMac-van-wesley kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
Mar 27 15:30:57 iMac-van-wesley kernel[0]: Sandbox: sandboxd(230) deny mach-lookup com.apple.coresymbolicationd
Mar 27 15:30:57 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic0
Mar 27 15:30:57 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic1
Mar 27 15:30:57 iMac-van-wesley kernel[0]: vnic0: promiscuous mode enable failed
Mar 27 15:30:57 iMac-van-wesley kernel[0]: vnic1: promiscuous mode enable failed
Mar 27 15:30:58 iMac-van-wesley kernel[0]: /drv/ HypIoctls.c:779 Ioctl VT-d status: 0
Mar 27 15:30:59 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=306[GoogleSoftwareUp] clearing CS_VALID
Mar 27 15:31:05 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=363[ksadmin] clearing CS_VALID
Mar 27 15:31:06 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=364[ksadmin] clearing CS_VALID
Mar 27 15:31:13 iMac-van-wesley kernel[0]: utun_ctl_connect: creating interface utun0
---------- This one seems to have started up a little faster than normal, so here is an earlier startup:
Mar 27 15:20:22 localhost kernel[0]: PMAP: PCID enabled
Mar 27 15:20:22 localhost kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Mar 27 15:20:22 localhost kernel[0]: vm_page_bootstrap: 2883004 free pages and 246340 wired pages
Mar 27 15:20:22 localhost kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
Mar 27 15:20:22 localhost kernel[0]: zone leak detection enabled
Mar 27 15:20:22 localhost kernel[0]: standard timeslicing quantum is 10000 us
Mar 27 15:20:22 localhost kernel[0]: standard background quantum is 2500 us
Mar 27 15:20:22 localhost kernel[0]: mig_table_max_displ = 74
Mar 27 15:20:22 localhost kernel[0]: TSC Deadline Timer supported and enabled
Mar 27 15:20:22 localhost kernel[0]: corecrypto kext started!
Mar 27 15:20:22 localhost kernel[0]: Running kernel space in FIPS MODE
Mar 27 15:20:22 localhost kernel[0]: Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:20:22 localhost kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS integrity POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS SHA POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
Mar 27 15:20:22 localhost kernel[0]: corecrypto.kext FIPS POST passed!
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Mar 27 15:20:22 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Mar 27 15:20:22 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Mar 27 15:20:22 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Mar 27 15:20:22 localhost kernel[0]: calling mpo_policy_init for Sandbox
Mar 27 15:20:22 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Mar 27 15:20:22 localhost kernel[0]: calling mpo_policy_init for Quarantine
Mar 27 15:20:22 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Mar 27 15:20:22 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Mar 27 15:20:22 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Mar 27 15:20:22 localhost kernel[0]: MAC Framework successfully initialized
Mar 27 15:20:22 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Mar 27 15:20:22 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Mar 27 15:20:22 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5]
Mar 27 15:20:22 localhost kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
Mar 27 15:20:22 localhost kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1234
Mar 27 15:20:22 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 23:03:24 Jun 24 2012) initialization complete
Mar 27 15:20:22 localhost kernel[0]: [ PCI configuration begin ]
Mar 27 15:20:22 localhost kernel[0]: console relocated to 0xfc0010000
Mar 27 15:20:22 localhost kernel[0]: PCI configuration changed (bridge=16 device=3 cardbus=0)
Mar 27 15:20:22 localhost kernel[0]: [ PCI configuration end, bridges 12 devices 17 ]
Mar 27 15:20:22 localhost kernel[0]: Thunderbolt runtime power conservation disabled.
Mar 27 15:20:22 localhost kernel[0]: mbinit: done [96 MB total pool size, (64/32) split]
Mar 27 15:20:22 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
Mar 27 15:20:22 localhost kernel[0]: rooting via boot-uuid from /chosen: D1154437-384E-377D-B73C-B36D1F5FFEF2
Mar 27 15:20:22 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Mar 27 15:20:22 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Mar 27 15:20:22 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Mar 27 15:20:22 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/ST32000541AS Media/IOGUIDPartitionScheme/Customer@2
Mar 27 15:20:22 localhost kernel[0]: BSD root: disk0s2, major 1, minor 3
Mar 27 15:20:22 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID c82a14fffe918aca; max speed s800.
Mar 27 15:20:22 localhost kernel[0]: Kernel is LP64
Mar 27 15:20:22 localhost kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833
Mar 27 15:20:22 localhost kernel[0]: ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:20:22 localhost kernel[0]: 1.004924: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
Mar 27 15:20:22 localhost kernel[0]: 1.009592: Atheros: mac 448.3 phy 5.10 radio 0.0
Mar 27 15:20:22 localhost kernel[0]: 1.009600: Use hw queue 0 for WME_AC_BE traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009605: Use hw queue 1 for WME_AC_BK traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009610: Use hw queue 2 for WME_AC_VI traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009615: Use hw queue 3 for WME_AC_VO traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009620: Use hw queue 8 for CAB traffic
Mar 27 15:20:22 localhost kernel[0]: 1.009624: Use hw queue 9 for beacons
Mar 27 15:20:22 localhost kernel[0]: 1.009691: wlan_vap_create : enter. devhandle=0x62f97658, opmode=IEEE80211_M_STA, flags=0x1
Mar 27 15:20:22 localhost kernel[0]: 1.009722: wlan_vap_create : exit. devhandle=0x62f97658, opmode=IEEE80211_M_STA, flags=0x1.
Mar 27 15:20:22 localhost kernel[0]: USBMSC Identifier (non-unique): 2008102301130 0x781 0xb7bd 0x1804
Mar 27 15:20:23 localhost kernel[0]: macx_swapon SUCCESS
Mar 27 15:20:24 localhost kernel[0]: BCM5701Enet: Ethernet address c8:2a:14:28:9d:b1
Mar 27 15:20:24 localhost kernel[0]: AirPort_AtherosNewma40: Ethernet address e4:ce:8f:56:8f:98
Mar 27 15:20:24 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Mar 27 15:20:24 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Mar 27 15:20:25 localhost kernel[0]: Waiting for DSMOS...
Mar 27 15:20:25 localhost kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff80450fc000
Mar 27 15:20:25 localhost kernel[0]: AtherosNewma40P2PInterface::init() <p2p> role 1
Mar 27 15:20:25 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Mar 27 15:20:25 localhost kernel[0]: IOBluetoothUSBDFU::probe
Mar 27 15:20:25 localhost kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0201
Mar 27 15:20:25 localhost kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
Mar 27 15:20:25 localhost kernel[0]: AMDBartsGraphicsAccelerator: ** Device in slot: SLOT--1 **
Mar 27 15:20:25 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
Mar 27 15:20:25 localhost kernel[0]: Previous Shutdown Cause: 5
Mar 27 15:20:25 localhost kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6720
Mar 27 15:20:25 localhost kernel[0]: DSMOS has arrived
Mar 27 15:20:25 localhost kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
Mar 27 15:20:25 localhost kernel[0]: en1::IO80211Interface::postMessage bssid changed
Mar 27 15:20:26 iMac-van-wesley kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
Mar 27 15:20:26 iMac-van-wesley kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Mar 27 15:20:29 iMac-van-wesley kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,0301,0de1,0300,4de1,0000]
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypVtx.c:186 CPU is Intel
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypLowCache.c:193 Low cache initialized (106560 kB for 24 VMs on 12288 MB)
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypApic.c:211 Host APIC phy 0xFEE00000 lin 0xffffff818aca5000 ver 0x15
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3941 [vtdInit]
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypVtd.c:3957 [vtdInit] VTD initialization disabled
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypSMBios.c:54 Failed to find SMBios entry point
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypModule.c:184 Parallels IPI irq = 0 ipi = 0(0x0)
Mar 27 15:20:35 iMac-van-wesley kernel[0]: /drv/ HypModule.c:194 Parallels Hypervisor 7.0.15106.786747 loaded.
Mar 27 15:20:37 iMac-van-wesley kernel[0]: 28.890941: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
Mar 27 15:20:37 iMac-van-wesley kernel[0]: 28.890949: switchVap from 1 to 1
Mar 27 15:20:37 iMac-van-wesley kernel[0]: 29.160659: performCountryCodeOperation: Not connected, scan in progress[0]
Mar 27 15:20:37 iMac-van-wesley kernel[0]: /prl_hid/ Parallels HID Helper started.
Mar 27 15:20:40 iMac-van-wesley kernel[0]: com.parallels.kext.prlnet 7.0.15106.786747 has started.
Mar 27 15:20:40 iMac-van-wesley kernel[0]: en1: 802.11d country code set to 'BE '.
Mar 27 15:20:40 iMac-van-wesley kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
Mar 27 15:20:43 iMac-van-wesley kernel[0]: com.parallels.kext.vnic 7.0.15106.786747 has started.
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [BNBMouseDevice::init][75.19] init is complete
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
Mar 27 15:20:48 iMac-van-wesley kernel[0]: [AppleMultitouchDevice::start] entered
Mar 27 15:20:52 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic0
Mar 27 15:20:52 iMac-van-wesley kernel[0]: com_parallels_kext_prl_vnic: created vnic1
Mar 27 15:20:55 iMac-van-wesley kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0C37] (Write Link Supervision Timeout) -- Send request failed (err = 0x0012 (kBluetoothHCIErrorInvalidHCICommandParameters))
Mar 27 15:20:56 iMac-van-wesley kernel[0]: vnic0: promiscuous mode enable failed
Mar 27 15:20:56 iMac-van-wesley kernel[0]: vnic1: promiscuous mode enable failed
Mar 27 15:20:56 iMac-van-wesley kernel[0]: /drv/ HypIoctls.c:779 Ioctl VT-d status: 0
Mar 27 15:20:56 iMac-van-wesley kernel[0]: utun_ctl_connect: creating interface utun0
Mar 27 15:20:58 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=303[GoogleSoftwareUp] clearing CS_VALID
Mar 27 15:21:02 iMac-van-wesley kernel[0]: Sandbox: sandboxd(315) deny mach-lookup com.apple.coresymbolicationd
Mar 27 15:21:06 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=359[ksadmin] clearing CS_VALID
Mar 27 15:21:07 iMac-van-wesley kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=360[ksadmin] clearing CS_VALID
Thanks for all help provided!
Maybe you are looking for
-
HT5649 Version 11.1.4 Does Not Work on my system
I had itunes version 11.1.3.8 and it was working just fine. I believe this version is the 32 bit version. itunes sent me version 11.1.4 which is a 64 bit version and it DOES NOT work on my system. Some how this important file was deleted. And I keep
-
Hi I have a new Zen Vision M and am trying to set up playlists. I keep deleting them by mistake and have no idea why - whenever I try to add tracks it deletes the songs already in the playlist. I have a Zen Touch before and didn't have this problem s
-
I am sorry, but I do noisy understand what happens to my RAW original Master files, which I keep offline on a RAID array and then what I do with my Vault which as all my edited photos ? Sorry for such a simple question, but would someone please help
-
how to change icon for all of the tile type? not just one, but all!
-
How do i know when a datagrid has been sorted?
i can figure out what/how a datagrid has been sorted but i can't seem to catch *when* it's been sorted. there's no "sort" event, headerRelease is happening before the sort and CollectionEvent & DataChange aren't firing when sorted. left scratching my