SLOW load when file sent to CS3 from LR

I have recently purchased a new PC w/Vista installed. I was using LR and CS3 and all was going well for a while. When selecting a file from LR that I wanted to edit in CS3, it would load in CS3 almost instantly. I was so thrilled because it used to take quite a while under my old machine. Now, all of a sudden, when I chose to edit a file in CS3, it can take up to a minute or more to get the file to open. While it's trying, my CS3 will show as (Not Responding) in the title bar, then the picture will finally open up. Also, nothing seems to open up in Camera Raw anymore. Yes, I know that LR has CR "embedded" in it, but what if I still want to use CR in CS3?
Any thoughts on why the image load is so slow would be appreciated. I have 4 gb of ram, and a quad core processor.
Jo

Well, Well, Well, I actually found the answer to my problem in the CS3 forum.
Topic
Photoshop CS3 is slow to load or open files
Robert Levine - 12:36pm Mar 20, 2008 Pacific
If your default printer is a network printer change it to something local. If you don't have a local printer, that's okay. Just install any print driver you'd like and use that.
I recently acquired a new "document" printer that was installed as a network printer. It has been set as the default. As soon as I changed the default back to my Epson R1800, my files load up quickly again. Who'd uh thunk it? Bless Robert Levine! Now all I have to do is remember to send documents to something other than the default printer!
Jo

Similar Messages

My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint.

My Office Print Pro 8600 Plus will not print pdf files sent to it from an iPad using ePrint. I just get an error message when I go to the HP Eprint centre. It does print the cover e-mail but nothing else. The attachment is not secure as far as I can see. I have tried sending an attachment from my Mac and that worked fine.
This question was solved.
View Solution.

Hello krnkln3.
Are you trying to send the PDF as an attachment in an e-mail sent to the ePrint e-mail address of the printer or are you trying to print using the ePrint app?
Try sending the same PDF document to the printer's ePrint e-mail address and let us know if that works. If this works but using the ePrint app is not working, maybe the ePrint app is not working fine with this PDF document (it could be due to it's size or something else). Remember that you can always use the e-mail ePrint address of the printer to send PDF documents as the processing is happening at the HP servers and not in your iPad as when you try to send it using the ePrint app.
Cheers!
Wixma.
I am an HP employee.
Say thanks by clicking the Kudos star in the post.
If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

Cannot load QXD file into Indesign CS3

Hi,
I'm trying to open up a Quark QXD file in Indesign CS3. It find finds the file as a readable file, but when trying to open I get the error message that it cannot open the file - Adobe Indesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application.
Adobe support lists this as an importable file, and tells me where the plug-in is stored - I've checked and do have it (I can find it in C:\Program Files\Adobe\Adobe InDesign CS3\Plug-Ins\Filters\Sangam Readers) Reader for QuarkXpress.smrd. The QXD file is not in use anywhere else.
Is it possible to check if this plug-in is actually loaded and if it's not, how do I install it? Has anybody else had this problem?
Any help gratefully received!!!

InDesign cannot directly open Quark files later than version 4 due to encryption. If your files are from a later version you can use the Q2ID plugin from Markzware.
Peter

Getting errors loading flat file into BI 7 from application server

We are able to load the file via local (from the PC) successfully but when we try and load the exact same file from the application server we get an error:
Error 'The argument '151.8470707' cannot be interpreted as a number' when assigning application structure, line 478, contents "11 140604 1000 8110 902070 P..."
What is really strange if we split the file into 2 we are able to load each of the sections successfully from the appliation server. We have a need to load the whole file from the application server and don't wish to split it up. Can anyone tell me how to make this work??

what I should do is the following:
open the 3 files you have using notepad and compare line 478 in the original file (that had the error) with the corresponding line in one of those 2 other files. what are the differences? the answer to this question might give you a clue.
and if you don't see any differences try to cut and paste that one line with the error to a new 4th file and load this one and see if the error reoccurs (I think it will).
regards, André

Slow response when calling a web service from an ADF client in JDev 11g

I have generated a web service (WS) for a stored procedure package with 3 functions. The WS has less than 1 second response times when I use the standard WS testing facility. I then created a data control for the WS selecting the default values in the JDev wizard. When I test the functions from a very basic ADF client the response times for the same functions are between 3-4 seconds i.e. very SLOW compared to the actual response time of WS. I need some advice on how to investigate this performance degredation as seen from the ADF client.
Could the problem be that the data control was created from a web service in the same project? Maybe it is necessary to have them in separate projects or create a proxy?
I created and tested the web service with the standard WS test tool and then simply went on to create a data control from this web service for use from a ADF client.
Some background info:
I saw the following warning in step 8 of the WS creation wizard:
"The configured policy store location at "C:\Oracle\Middleware\jdeveloper\j2ee\home\gmds" is invalid. Application cannot read policies from this location. Check that the directory name is correct and the location exists."
Also I can confirm that there is no j2ee directory in my environment.
The application server logs the following for each call from the ADF client:
009-apr-01 15:55:22 oracle.adf.model.connection.webservice.impl.WebServiceConnectionMessages debugGetSaajInteraction
INFO: Creating a SaajInteraction for oracle.j2ee.ws.model.OperationImpl@1c81d2c
2009-apr-01 15:55:22 oracle.adf.model.connection.webservice.impl.WebServiceConnectionMessages debugGetSaajInteractionResult
INFO: Created [email protected]79edc for oracle.j2ee.ws.model.OperationImpl@1c81d2c
2009-apr-01 15:55:22 oracle.j2ee.ws.rm.LogMessages logExceptionAsWarning
VARNING: Internal error: oracle.wsm.policy.model.PolicyModelException: WSM-01647 : There are no policies that match the specified category wsrm and resource pattern {1}.
2009-apr-01 15:55:22 oracle.fabric.common.AbstractSecurityInterceptor init
INFO: AbstractSecurityInterceptor:init(), client.mode.jse==ture and isJEE==true, probably is a case of JEE client calling JSE client
2009-apr-01 15:55:22 oracle.wsm.agent.WSMAgent init
INFO: WSMAgent is initialized for category=management, function=agent.function.client, topologyNodePath=null, isJ2EE=true
2009-apr-01 15:55:22 oracle.fabric.common.AbstractSecurityInterceptor init
INFO: AbstractSecurityInterceptor:init(), client.mode.jse==ture and isJEE==true, probably is a case of JEE client calling JSE client
2009-apr-01 15:55:22 oracle.wsm.agent.WSMAgent init
INFO: WSMAgent is initialized for category=security, function=agent.function.client, topologyNodePath=null, isJ2EE=true
2009-apr-01 15:55:24 oracle.wsm.common.logging.WsmMessageLogger logSevere
ALLVARLIG: error in the Oracle WSM Policy Resolver Initialization, because incorrect configuration is passed: {0} {1}
Edited by: user10601664 on Apr 8, 2009 7:11 AM

Find solution. Check this thread:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdjava/faq%2b-%2bmodels%2b-%2badaptive%2bweb%2bservice
The com.sap.tc.webdynpro.model.webservice.api.IWDWSInvocationModifier interface can be implemented by an application using the Adaptive Web Service model in order to modify the web service invocation object just before it's execution. Invocation modifiers need to be registered with the executable model class for which invocation is to be modified:
Request_NumberToWords requestMO = new Request_NumberToWords(model);
requestMO.wdSetInvocationModifier(
new IWDWSInvocationModifier() {
    public void doModifyInvocation(Object port) {
      HTTPControlInterface httpItf = HTTPControlFactory.getInterface(port);
      //timeout for this WS invocation is 120 sec; don't use global config. setting of WS-Runtime
      httpItf.setSocketTimeout(120000);
    public void doModifyAfterInvocation() {}
Best regards.

Cannot open image files in PS CS3 from Bridge CS3

Cannot open file in Photoshop CS3 (10.0.1) from Bridge CS3 (2.1.1.9)
Tried choosing File>Open and double clicking the image thumbnail
Error dialogue box pops up and reads:
Windows cannot find\C:\Program Files\Adobe\Photoshop CS\Photoshop.exe
I wouldnt expect CS\Photoshop.exe to be found because CS3\Photoshop.exe upgrade is installed.
Will downloading the Adobe Photoshop update for Adobe Photshop CS3 (11/15/2007) or Adobe Bridge CS3 update for Adobe Bridge CS3 (11/15/2007) be my best bet for correcting this problem?

Thanks to Freeagent for pointing me to the solution.
For fellow Windows XP user's:
Control Panel > Folder Options > File Types
It would have been nice if the Install Wizard of PS would have handled this automatically or had an advisory instruction to manually associate image files in Windows XP.
I thought all along this was a Photoshop CS3 / Bridge CS3 problem since Bridge was calling for both the image file and Photoshop.
If Freeagent has anyone's ear at Adobe please pass this on.
Thanks Again

Load a file to a BLOB from Forms6i

Hy!
How can i load a file into BOLB using forms 6i?
Daniel.

To my knowledge there are two ways:
1) Using an OLE container. I don't know what patch of forms 6i you are using and I don't know if that works fine with BLOB but I know it does work well with LONG RAW columns. However, you will probably be able to retrieve your .DBF object only from within Oracle Forms 6i and you need a "helper application" installed on the client machine to display or do whatever needs to be done with the .dbf.
2) Using the DBMS_BLOB package. However, I am not very familiar with that approach. You may wish to do a search in this forum for BLOB and you may be able to find a solution using that package.

Slow loading when creating a new folder or deleting a folder or file

Hello! Before we begin, a little information. This problem only started occurring AFTER I updated to Mavericks. I have been through every operating system since Snow Leopard and NEVER had this problem until Mavericks. It has been palguing me since I updated in October and I need some answers. Seeing as how I do not feel like paying $59 to ask apple for help in this matter I'm coming to the community. This is an odd problem where finder doesn't seem to want to load certain actions properly. In my case, creating a new folder, deleting a folder or file, and using the "always open with" function.
In terms of creating a new folder, anywhere in finder, the folder will not appear immedlately, insetad it takes a staggering 5-10 seconds to appear where I created it. For deleting a folder or file, the same thing happens. It takes a huge amount of time to move the folder or file to the trash bin, UNLESS I open a different folder or file in the same directory after deleting said folder or file, in which case it moves right away. And the "always open with" checkbox just doesn't work at all.
About my platform: Intel iMac (Late 2009) 3.6 GHz Intel Core 2 Duo, 12 GB 1067 MHz DDR3, 220 out of 499.75gb hard drive space. OS X version 10.9.2
Thanks in advance for any help in these matters.
You guys helped me solve the unchangeable background problem when apple couldn't, so I'm reaching out to you again for that awesome support I know you guys have in you

Adobe contacted me and had me reset my prefereneces for flash using their steps. I have done that and a complete uninstall/re-install and searched for corrupted fonts and still I am having the same issue and adobe support appears to have just left me hanging.
Is there anyone here who has experienced this same issue that can offer any assistance to solve this issue. As it stands right now I have a product I cannot even use and that is troublesome to say the least.
Thanks for any help you can offer.

PSE12 slow loading Fujifilm files in slide show

I have just upgraded from PSE10 to PSE12 and now when I use the Slide show (full screen) in organizer with Fujifilm Raw files it take about a minute and a half to load up and same again when you zoom in. Is there any way of speeding this up in PSE12? It was slow in PSE10, but it did take over a minute in total.

nealeh wrote:
Thanks (I think). Duhhh - my head hurts .
To me also Reply #11 seemed key. But I think on first read through the significance of:
With the lossy compressed DNG (scene-referred), you can do all the normal edits you're accustomed to with raw: white balance, highlight recovery, changing camera color profiles, noise reduction, sharpening, lens corrections, etc. With the normal JPEG in DNG wrapper (output-referred), you cannot
had escaped me as it seems counter-intuitive - "lossy compressed" just sounds more image degrading than "normal".
The jpeg compression algorithm is generally used to compress image files like tiffs or psds. It is based on the fact that our eyes are much more sensitive to the luminosity than the colors, and that results in a 'simplification', not a 'degradation' of the data. Imagine you have a very detailed map of an island printed 1 meter x 1 meter. You want to print it 30 cm x 30 cm. You'll downsample the image so that you get a good 300 ppi picture : you simplify to discard all details your eyes could not see in the 30 x 30 print ; that is lossy in the sense that you discard the less meaningful bits of data.
Note that using the jpeg compression algorithm on the just demosaiced raw file is possible because you can process the luminosity and color information from that stage. At that stage, the 'jpeg' compressed data is still an undefined image unlike the usual output-referred jpegs. Another compression algorithm could have been used, with less visual efficiency.
Since the link I gave in this post, the new version of Lightroom has taken advantage of the lossy dng compression in a very smart way. Lightroom keeps a catalog and a preview file for quicker browsing on its library. Instead of using normal jpegs as previews, you can use lossy DNGs of about the same size. The advantage is that if the catalog and previews are stored in a computer and the library in another drive, you can edit the raw files and store the results in the catalog even if the other drive is not plugged in. When you plug the drive in, you can sync the parametric editing in the catalog to the real full size raw images.

HELP! Fonts change/get knocked out when files sent to rip and printed

When ripping files for print from InDesign CS3 some fonts - sometimes the first letter of the word or the last letter of a word or a letter in between - is replaced by a box with an X in it. It would not be a consistent incidence but rather sporadic and so we've had to re-print many publications. We've started make a pdf and then placing it in InDesign CS3 before ripping. This problem did not occur with CS2. Any suggestions?
Also, does anyone know if InDesign CS4 has the inbooklet or any other similar feature?
Thanks.

Try sending Complete rather than Subsetted fonts when printing, perhaps? (Print dialog->Graphics->Fonts->Download->Complete.) You can try toggling the "PPD" checkbox there too. Sometime flipping it the other way helps with print problems.
Lastly, it never hurts to set subsetting to 0% when saving Illustrator files placed in the document, with the theory being that if you send complete copies of the font everywhere, all the letters will be available for printing, even if something along the line gets confused and uses the wrong version.

File sent by bluetooth from laptop

Hello!
I sent a file (blablabla.rtf) from a laptop to my Nokia N82 by bluetooth. I get this file in my phone as a message in Inbox messages folder with Bluetooth icon. When I opened this message I see rich text instructions.
Where can I find this file in my phone? How can I save an attachment from this strange bluetooth message?
I sent this message as EMail and got EMail message on my desktop computer as rich text instructions in the body of message without any attachments.
Why can't I send a file from a laptop to my phone by bluetooth anf get it as a file, not as message?
Thanks in advance!

Hello:
I don't use it, but iCloud should allow you do do something like you wish.
You cannot use Bluetooth to transfer files.
Barry

Converting files to InDesign CS3 from Illustrator

We have lot of files needs to be converted from Illustrator to InDesign CS3.
How can it be done? We have tried but it is coming as an image & can not modify anything.

Yeah, you're right as usual, Peter, but what if there isn't any vector artwork in the Illustrator file? You'd be aghast at the number of fill-in-the-blank forms I've converted from Illy to ID; files that needed the typographical control of ID, but didn't need any real vector content. You know, where the blanks should have been done with tab leaders, and instead are a forest of underscores, really short text boxes with "rich black" stroke, text boxes with fill but no stroke, et cetera. Forms where the only "artwork" is a 72 ppi raster logo pasted from a Word file. I could go on for hours in this vein.
You might be assuming that the OP's Illustrator files were made by a competent, non-crazy designer, and that they are mostly vector content and therefore should have been made in Illy in the first place. Over here in nonprofit-land, I can't afford to make such assumptions. So, I'm not going to assume that there's any vector content at all in Masud's files. Maybe there is, maybe there isn't. How can I judge, from the ~20 words that he's posted on the topic? I mean, maybe jongware is absolutely right in assuming that the OP is trying to make ID the do-it-all app, but we have no way to know.
Speaking of which: Hey, Masud, you had best post some details about your project (like the details that Bob requested, for example), unless you want this thread to die.

SpeedGrade CC (2014) corrupting .psd files sent as clips from Prem Pro CC(2014)

I have embedded a Photoshop CC file (.psd) in a Prem Pro CC sequence. Each time I link the sequence to SpeedGrade, making sure I don't interfere with the .psd clip, the clip is returned to Prem Pro corrupted and have to restruscture and reinstall each time.
Is there something that I can do to prevent this or is this a bug?
Thanks in advance.
Paul

I have embedded a Photoshop CC file (.psd) in a Prem Pro CC sequence. Each time I link the sequence to SpeedGrade, making sure I don't interfere with the .psd clip, the clip is returned to Prem Pro corrupted and have to restruscture and reinstall each time.
Is there something that I can do to prevent this or is this a bug?
Thanks in advance.
Paul

Why is it that when i sent a picture from my phone to my printer it prints on regular paper?

I would like to have the pictures that I send off of my phone print on the photo paper in my printer. I have changed the setting on my printer by choosing the photo tray as primary, and it still prints on regular paper...this is very frustrating.

If you happen to be using eprint to send the jobs, and own a photosmart 6520 or 7520, please refer to this thread: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Photosmart-6520-amp-6525-7520-amp-7525-ePrint-...
If this is not the case, I will need your printer model, and how you are printing the photo. This could be using airprint, emailing the job to the printer, or using a mobile app like hp eprint for iOS, or eprint home and biz on android. With this information we should be able to get this resolved.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

PP suddenly very slow loading files, generating peak files

Project from yesterday suddenly extremely slow loading, syncing files and generating audio peak files. Using PP 2014.2 on HP Z800. SSD system drive, internal raid and three USB 3 drives connected to USB3 pci-e card. Suspect drive could be hanging up but not sure how to test since all was fine last night. Files are HD 23.98 quicktime prores

I also notice my CC connection needed to be reset several times. The Control Panel internet settings keep switching back on LAN from Automatically detect settings to Use a proxy server. My computer is dual 5650 processors, 24 g ram, so don't see that as problem, especially since this worked yesterday.
Could really use help ASAP
Thanks

SLOW load when file sent to CS3 from LR

Similar Messages

Maybe you are looking for