Slow loading and tabbing with dynamic form

Hi. I have a 45 page pdf and I need to be able to select some pages to not print based on content of a field. To do this I understand the form needs to be saved in Acrobat v7 or greater and saved as a dynamic form. So far so good. When I create the dynamic form by opening the existing 45 page pdf, livecycle creates a form object for each line in the document. That's a ton of objects that don't need to be objects. I am adding 15 enterable fields into this document. For example the document may contain a line of text "Last Name", this appears as a form object as described. I am adding a text field next to that so the user can enter their last name. After saving the document it takes a long time to load and the tabbing from field to field is very slow. I am thinking this might be due to processing all the form objects that don't need to be form objects, but not sure. Question: based on my description is there a way to create this document without all those non-enterable form objects?

Similar Messages

HT5559 slow loading and loading in sections

Start up began last week with a gray slow screen - past two days 13" mac is slow loading and loading in sections of white blocks on my screen - is it JAVA? What to do? It happens if I walk away for a short time, if it goes into screen saver and or if I put lid down - Got 13 " alumn case with Mtn Lion September 2012.

Go step by step by step and test.
1. Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204
2. Delete Caches.db
    Close all windows and quit all applications.
    Hold "option" key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Caches > com.apple.Safari > Caches.db
    Right click the Caches.db file and select "Move To Trash.
    Close windows and relaunch Safari.
3. Empty Caches
    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
4. Delete Cookies
    Safari > Preferences > Privacy > Cookies and other website data:
    Click the “Details” button.
    Remove all cookies except from Apple, your internet service provider and banks.
5. Safari > Preferences > Extensions
    Turn off Extensions if any and launch Safari again to test.
    Turn on those one by one and test.
6. Update Adobe Flash Player.
     http://get.adobe.com/flashplayer/
7. Deselect Proxies if selected.
    System Preference > Network > Advanced > Proxies Tab
    Under "Select Protocol", uncheck any box if selected.
    Click "OK" then "Apply”.
8. if this doesn't help, do an EtreCheck and post the report here please.
     EtreCheck: https://discussions.apple.com/docs/DOC-6173

I thought ff4 was suppose to be faster than 3.6 but it is slower loading and getting to websites. Are ther certain add-ons that could be affecting ff4 that did not affect 3.6?

ff4 generally slower loading and loading pages.

same problem here for the past two days till this morning when I created a new profile and removed ALL addons from the default profile. With the new profile with NO addons, I got to the sites with video that I had problem with and flash player did work.
Now, I only have three addons that have not created the problem; adblock, flashgot, and flashblock.
Create a new profile and check it out.

Can you do subtractions and divisions with Adobe forms?

I am converting MS Excel documents into Adobe Forms using Adobe Strandard 9, and I would like to be able to do subtractions and divisions with the form calculation option. Currently the only options I have are 'sum (+), product (x), average, minimum and maximum'. I see that there are 'Simplified field notation' and 'Custom calculation srcipt' options, but I can find no reference to doing subtractions or divisions. Any help would be appriciated.
Kerry N

Try these options:
Under the Calculate tab for the properties for field3
In the Custom calulation script field, use:
this.getField("field3").value = this.getField("field2").value - this.getField("field1").value;
or in the Simplified field notation, use:
field1 - field2
Use / instead of - for division instead of subtraction.
Karl

Panel with dynamic form

I need to create panels with dynamic forms. Why does my application will have various forms and if I have to create a lot of forms it will take too long to complete my application.
Can anyone help me?

So my idea is as follows ...
I need to create various forms, actually I wanted to create a scheme where the forms to adopt the characteristics defined by me.
<s:Panel width="350">
            <mxml:CustomForm dataConfig="{dataConfig1}" width="100%" />
</ S: Panel>
Yo I'm adding the inputbox, LABES and buttons on the panel through the
dataConfig1 = new ArrayCollection ([
                    (Label: 'Name', message: 'Invalid name', validateType 'noblank', id: 'name', text: 'Pedro Claudio', required: true),
                    (Label: 'Mail', message: 'Invalid Email' validateType: 'email', id: 'email', text:'', required: true)
I wonder if this is the easiest way to create the forms?
How does this business of the panels child?

IMac - Slow load and wifi problems

I have lion installed on my macbook pro and on my iMac. My macbook pro works GREAT...no problems. My iMac - I am ready to toss out a window. Here are the problems:
INCREDIBLY slow boot up time - 5-10 minutes from off - 5-8 minutes from sleep
The hard drive is constantly working. I can have nothing open and it sounds like the hard drive is constantly spinning
Half the time my wifi hardware is not found on boot up and I have to reboot with slow load times - sometimes taking 20 minutes before I can get logged in to a 'working' computer
A lot of my programs have become slow. Safari can be slow responsive but others that are not apple that have done 'lion updates'
I have my activity monitor running and nothing seems to be hogging resources. My iMac specs are:
2.8 intel core i5
12 gb ram
2 TB hard drive with about 1tb free
I ran the lion update that came out and it did not seem to do much for me.
Anyone have a solution? Anyone tried a clean format and did this work? Lion works great on my laptop and I just need it to work on my main computer as well.
Reba

i think part of the boot up time issue is the amount of windows you happen to have open when you put it to sleep
other is lion upgrade slows it down due to this auto save function
my wifi is also spotty and acts like it can't find itself at times
and this is a brand new imac

Spry event listeners with dynamic form elements

Hi ,
I am trying to implement spry event listeners with a form that has dynamic check boxes and text field name. I now i can get the elements in a var and loop through with a normal function but can this work for spry events listeners

Short answer is yes. But I have a feeling that you need further assistance, in which case give us a URL to a page that you want to apply the event listener to.

Bizarre CFIF issue with dynamic form variables? Very strange...

I can't figure out what I'm doing wrong here. Here's my code. Issue explained below.
            <cfquery name="reviewconfigloader" datasource="MOLMS">
            SELECT *
            FROM dbo.BaseModel
            WHERE dbo.BaseModel.AccountID = #molmsAccountID# AND.dbo.BaseModel.basemodelActive = 1
            </cfquery>
      <table width="100%" border="0" cellspacing="0" cellpadding="3">
        <cfloop query="reviewconfigloader"><cfif isdefined("form.baseconfig#reviewconfigloader.basemodelID#") AND ("form.baseconfig#reviewconfigloader.basemodelID#") NEQ "" AND ("form.baseconfig#reviewconfigloader.basemodelID#") NEQ 0><cfoutput><tr>
          <td width="40%" bgcolor="##F7F7F7" class="basemodelsub">     #form['baseconfig#reviewconfigloader.basemodelID#']# #reviewconfigloader.basemodelName# #reviewconfigloader.basemodelSubName#</td>
          <td width="15%" bgcolor="##F7F7F7" class="basemodelsub"><div align="center">x 14 </div></td>
          <td width="15%" bgcolor="##F7F7F7" class="basemodelsub"><div align="center">$486/yr</div></td>
          <td width="15%" bgcolor="##F7F7F7" class="basemodelsub"><div align="center">$1444/yr</div></td>
          <td width="15%" bgcolor="##F7F7F7" class="basemodelsub"><div align="center">$1444/3 yr</div></td>
        </tr></cfoutput></cfif></cfloop>
      </table>
What I'm doing here is fairly basic.I'm running a query with a number of configs in it...and then creating a loop to output them. Ultimately, I only want the configurations that didnt have 0 submitted in the form on the previous page. Each one of the configs in the config query has a dynamic form variable on the previous page with a quantity tied to it. I am trying to eliminate all quantities past that aren't 0 (or not eliminate, just not show)...as you can see from the cfif statement.
Here's where it gets weird. You'll notice I output #form['baseconfig#reviewconfigloader.basemodelID#']#, just for testing, which shows me the quantity as it should. I ran a test and put in a couple of 1s, 0s, 12s, 6s, etc in the form fields on the previous page. If this thing worked, it wouldnt show anything for any of the records with their basemodelID value being submitted as 0. Not the case. It shows all records. What is more hilarious is that it outputs perfectly in my test #form['baseconfig#reviewconfigloader.basemodelID#']#, showing the correct numbers entered in the previous form, the 1s, the 0s, etc, tied to each record. But for whatever reason, the cfif code isn't catching it.
What's even more bizarre...I replaced the cfif ("form.baseconfig#reviewconfigloader.basemodelID#") NEQ 0 with GT 12 (12 was the highest number that I put in the form) and it still showed all records. Then I put it in as LT 12 and it showed nothing. I decided to take it one step further and put it in for GT 1231243242343 (random massive number), which it still showed all of the records. So somehow, my CFIF statement thinks that ("form.baseconfig#reviewconfigloader.basemodelID#") is a incredibly large number, although when I output it in the row below, it is the number it should be.
I'm stumped. Any ideas? Thanks in advance!!

Hey Dan...thanks....unfortunately...with the cfif testing, thats kinda what I'm
doing because I dont have an "expected" value. My expected value is anything a user inputs thats greater than zero, hence NEQ 0 and NEQ "". The real problem is taht what I'm outputting works and what the cfif clause is seeing is obviously very different.
As far as your comment about looping out the variables and then setting a query equal to the value in a cfquery, remember...these are form objects and therefore nothing can be tied back to the database. The result from the code is establishing a form variable (example.... form.basemodel1 (if 1 was the basemodelID from the database query) so it can capture whatever data the user has passed from the previous page in a text input. So that input could have been 23, it could have been 1053.
So really the only way to do it is create a query and loop out the variables.... and attach them to form objects (basemodel1, basemodel2, basemodel3 etc where the 1,2 and 3 are the unique ID's for those models in the database), and then look for where those form objects may have been filled in in the previous page by stating IF this form object not equal to 0 or "", output the data.
Does that make sense? Thanks for the help guys I'm completely stumped by this. I've done this a million times with CFIF and I'm really struggling with why this isnt working....
JE

Hiding Columns, Regions and Tabs with Javascript

Hello fellow Apex users,
I am using APEX 3.2.1 and am having a Javascript problem. I am trying to make a column disappear as soon as the user selects “No” from the drop-down menu.
TheAPI for disabling a column works fine: $f_DisableOnValue(pThis,pValue,pThat) and the code Example (goes on HTML Form Element attributes): onchange="html_DisableOnValue(this,'No', 'P16_EXAMPLE_COLUMN');"However, when I try to customize the API to “Hide on Value” nothing happens.
This is the API: $f_Hide_On_Value_Item(pThis,pThat,pValue) and my code Example:
onchange="html_ Hide_On_Value_Item (this, 'P16_BUDGET_CODE', 'N');" Please tell me what I am doing wrong. Also, please tell me if it is dynamically possible to make Regions and Tabs disappear.
Thanks,
Mauricio

Okay, I was just trying to exlplain the idea...
So you would have maybe 2 functions (I still don't know your exact requirement) like this...
<script>
function doOneThing(pThis){
if(this.value == 'option1'){
$x_Hide('P_ITEM2');
$x_Hide('P_ITEM3');
$x_Hide('P_ITEM4');
else if(this.value == 'option2'){
$x_Hide('P_ITEM5');
$x_Hide('P_ITEM6');
$x_Hide('P_ITEM7');
function doAnotherThing(pThis){
if(this.value == 'option1'){
$x_Show('P_ITEM2');
$x_Show('P_ITEM3');
$x_Show('P_ITEM4');
else if(this.value == 'option2'){
$x_Show('P_ITEM5');
$x_Show('P_ITEM6');
$x_Show('P_ITEM7');
</script>Then you could have an onload function in the HTML Body Attribute or the page like this...
onload="doOneThing(document.getElementById('P_ITEM1'));"I can't write all of your code for you unless you give me a real example. These are ideas that I'm showing you - I would suggest that you try and take the time to learn exactly what they're doing and then adapt, change or exapnd on them for your own needs.
Cheers
Ben

Are there any options (current or future) for working with dynamic forms on the iPad?

We have a few iPads for use in our lab and are trying to utilize them as best we can. Until now, we've had no luck finding a way to use dynamic forms (specifically and preferably from Adobe LiveCycle) on the iPads. We use forms as electronic worksheets, and are trying to determine the best avenue to continue down. Any suggestions would be appreciated.

I only spent a few seconds searching, but I did find this... https://itunes.apple.com/us/app/dynoforms/id689415970?mt=8
I'm sure there are other apps out there as well.

Slow open and save with psb files Photoshop CC

Here is my system info:
Mac Pro Early 2009
Processor 2.66 GHz Quad-Core Intel Xeon
Memory 32 GB 1066 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
Software OS X 10.8.4 (12E55)
Running Photoshop off an SSD 220GB as my bootdisk , and then my scratches are two 1TB Western Digi Caviar Blacks, both at about 60% full, running Big and flat in PS CC prefs,
Running Photoshop CC 14.0.0
I'm having very slow open and save times for psb files ranging in size from 2GB to 6GB - slow meaning 5-6 mins
Does anyone have any suggestions to improve this time?

I've noticed the same thing with .tif files. It's taking a good minitue or more to save a 15 meg .tif. Very annoying. I opened PS4 and converted the same .jpg to a .tif and saved it in the same location and it took about 4 seconds. Something is totally jacked with saving files in CC.
Checked the compression settings and the are the same in both. Not a big fan of CC everything is slower. I pay monthly now to work slower?!? May have to go back to CS4.

Help with CISCO-887VA adsl over pots and PPPoE with dynamic IP

Hi
I've got problem trying to connect the CISCO-887VDSL/ADSL OVER POTS ROUTER to internet. Only got the LAN part working.
I'm trying to setup PPPoE with dynamic IP
Followed CISCO's documentations but the commands used were not recognized by the router. Any simple working config for me to follow will be enough.
I'll appreciate any help. Thanks a lot!
here's my config.
! Last configuration change at 08:31:51 UTC Sat Feb 11 2012
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
crypto pki token default removal timeout 0
ip source-route
ip dhcp excluded-address 10.0.0.1 10.0.0.149
ip dhcp excluded-address 10.0.0.199 10.0.0.254
ip dhcp pool sdm-pool
import all
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
dns-server x.x.x.x x.x.x.x.x
lease 0 2
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGLxxxxxxx
controller VDSL 0
ip ftp username cisco
ip ftp password cisco
interface Ethernet0
pppoe enable group global
pppoe-client dial-pool-number 1
no ip address
shutdown
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip directed-broadcast
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxx
ppp chap password 0 xxxx
ppp pap sent-username xxxx password 0 xxxx
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list 1 interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
ip access-list standard 1
permit 10.0.0.0 0.0.0.255
no cdp run
line con 0
line aux 0
line vty 0 4
login
transport input all
end

Try to check with your ISP the modem string to use for VDSL
and some ISP support direct dhcp on Ethernet0 without PPPoE.
An equivalent config is working for me in Switzerland with Swisscom.
N.B. "modem" under VDSL controller is enable using service internal !
service internal
controller VDSL 0
operating mode vdsl2
modem co5
ip source-route
ip cef
ip dhcp excluded-address 10.0.0.1 10.0.0.149
ip dhcp excluded-address 10.0.0.199 10.0.0.254
ip dhcp pool sdm-pool
import all
network 10.0.0.0 255.255.255.0
default-router 10.0.0.1
dns-server 8.8.8.8
lease 0 2
interface Ethernet0
ip address dhcp
ip nat outside
interface Vlan1
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
ip nat inside source list 23 interface Ethernet0 overload
access-list 23 permit 10.0.0.0 0.0.0.255
end

Slow loading and slow scrolling webpages.

The pages in safari and Firefox are loading and scrolling down and up very slow, this was not like this yesterday or ever before, why is this?

Check Activity Monitor (located in Applications -> Utilities) to see what other processes are using up the cpu. If both browsers are slow, it sounds like something else is using the cpu.

Why are some websites very slow loading and others not

Some websites are very slow to load and others not. Doesn't seem to be any logic as to. The affected URL below is one that is very slow. I can understand if it is not an Aussie website. Having said that New York Stock Exchange website "http://www.nyse.com/about/listed/lcddata.html?ticker=DJI" loads quicker than the subject URL

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Slow loading pages even with a fresh FF install and fresh Profile

Hi, I been having this issues with FF for months now, had to switch to Google Chrome
Pages takes a while to load, transferring data, waiting for website, connecting, while in Google Chrome and other browsers it connect to websites and load pages a lot faster
for the past few months that I have had this issues I tried Resting or installing a fresh copy of FireFox (with new profile), tried to run it without any add-ons, reinstalled windows several times (win7, 8.1, and Win 10 Technical preview "all 64bit") and I even bought a new internet router during that time
tried pipelining configuration in "about:config" nothing fixed the issues, and not certain websites but all the websites I visit, and I finally thought about finding help here because I prefer using FireFox, thank you in advance.

''ideato [[#answer-714003|said]]''
<blockquote>
Hi any change in behavior if you boot the computer in [http://support.microsoft.com/en-us/kb/2809468 Windows Safe Mode with network support] ?
thank you
</blockquote>
Hey, I tried to restart in Safe mod with network but for some reason, the network is not working still, but I tried the Diagnostic Startup through the System Configuration "msconfig" and tested FF but still having the issues.

Slow loading and tabbing with dynamic form

Similar Messages

Maybe you are looking for