Slow loading blog and problems with comments

I've had a number of visitors e-mail to say that my blog takes too long to load, that the page is "jumpy" when scrolling down the page, and that it may not allow the person to comment or when commenting the site unexpectedly closes.
I've tried viewing the site using a PC and I see these problems with Firefox. IE users can leave comments and the site loads a bit better but not ideal.
Are other users experiencing these problems?

Kathryn ~ You could try downsizing your images manually using, for example, the Preview app and choosing File > Save As... then reducing the Quality slider.
Or downsize them automatically via:
...which I haven't personally used. Also I don't know whether it works with iWeb '06.

Similar Messages

Logic Express 7.2 painfully slow loading ESX24 and JamPack audio samples

Logic Express 7.2 is painfully slow loading ESX24 and JamPack instrument audio samples. The hard drives very busy as if Logic is searching for the files. Garageband loads the JamPack audio files almost instantly. Don't have this problem with Logic Pro on my G5, only Express on my MacBook Pro.
Have updated to 7.2.1 but no change.
Anybody else experienced this? Any tips appreciated.
MacBook Pro Mac OS X (10.4.6)

Hi Jorge,
You are absolutely right, it's just the first time I load the samples. What's strange is that it's happening with JampPack 4, it took about three minutes to load one of the string intruments, but when I closed that instrument and opened esx the same string intrument was loaded. I don't remeber this taking so long on my G5 though!
Thanks for your help Jorge.
MacBook Pro Mac OS X (10.4.6)

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

My mac book pro is verry slow, and problem with wirless, battery, cooler

Hello,
I bought 2 months ago Mac book pro 8,2 intel core i7 2760 QM CPU@ 2,4 ghz 8 core, I installed boot camp, 64 bit , and everything is running verry slow, boots up verry slow, programs, browser runs very slow, and i have a problem with my wirless connection, i get , after a wile of usage "Limited Connection" and i have to reconnect to network ( on other notebooks i dont have this issue) .
My computer runs slow because of my Hard drive 5400 rpm?
And how can i preserve my battery, are there Spare batteries on the internet for this macbook.
Sometimes when i play alot, my computer gets very hot. What cooler do you recomend for macbok pro, i heared that fan coolers aren't verry good.
If i use my macbook pro alot , it can break or something?
<EDIT> I forgot to tell, i cannot update to my lates graphic card software, i can''t update anything. I download the update and it tells me that its not compatible with the hardware. (and yes, it is the right version 100% compatible)
Thanks for your help.

Rid the MBP of Genieo and Norton AV. For Genieo, use these instructions:
http://www.thesafemac.com/arg-genieo/
Check the Norton web site for removal instructions.
If your MBP has had kernel panics. log one and post it per these instructions:
https://support.apple.com/en-us/HT201753
Ciao.

CNN website problems with Comments section. Scroll and post problems

CNN website, myself and other firefox users can no longer scroll up and down inside a comment when making a post.
Often you can not post the comment with the 'post' button unless page is reloaded.
Problem has been occurring for last week or so.
I have confirmed that other uses on CNN have same problems with firefox.
Problem doesn't occur when using I.E.8
Brgds,
John

I have this problem with IE 8. I cannot post comments on CNN.com. I thought CNN.com might have disabled my ability to post comments but am not sure if they have that ability. Thanks for your help!

Problem with Comments

I'm having a problem with both blog Comments (iWeb 2.0.4) and in my business site photo gallery, where you can leave a comment about a photo.
Clicking on Add a Comment gets this message; "*We're sorry. We are having a problem processing your request.*"

About a month ago, for no apparent reason, most the comments on my blog page disappeared. Called Apple, very sympathetic, couple of emails saying they were working on the problem and for the last 3 weeks, nothing. I know the migration from .mac to mobileme caused a lot of issues, most of which are resolved. Right now, my website works perfectly on Safari, photo albums, music files all work great. However on Firefox v3.01, the comments on my blog page do not appear, plus it takes a good minute before the page loads and then I get that type error message. I can access the comments when I log in to the site, but to a visitor there is nothing there. I have noticed a lot of the posts say "publish all to .mac, but I am very hesitant to do this. When I had my original problem, the tech from Apple said try the publish all and I did and the one day of comments that still showed, disappeared. Any ideas?

Workflow and problems with labels

Hello!
I've been testing out some things in Edge and I've noticed a few things that I've been trying to find some documentation and information about, I would greatly appreciate any enlightenment on the following observations:
Frame labels do not work for me - both with files created from scratch in Edge and ones made of existing HTML + CSS files. I tried the in app lesson on looping the counter and the 'Play from (loop)' doesn't work, I thought it might have been because of an error in the instructions telling users to play from a frame label that exists at the same point in the timeline where there is a 'stop' trigger but even offsetting the 'loop' label would not work. The final sample file works as intended when previewed.
I tried a few tests with new files consisting of really basic stuff - one symbol with an 'on-click' > play from (go/start/in/one/etc) and another symbol simply animated on the x and y axis with an animation to the opacity with a stop trigger placed on the timeline and tested with the play from label placed both at the same time as the stop trigger and offset after the trigger - neither works it has no effect when clicked. (I know about what scripts to do on completion to get it to play from the start) Interestingly play from (milliseconds*) *0.125/1001/2000000 etc does work for me but this is not ideal as it is far more useful to be able to play from labels.
Animating existing HTML - I've got a simple html page set up consisting of a container div with a number of other divs inside which I have been animating in Edge. The Edge file is set up so the container CSS overflow is hidden. Now can someone please clarify if the following method of workflow is a mistake on my part, limitation in HTML+DOM, bugs in edge or combination/none of those things?
Workflow - bring in the html file to edge do simple animated opacity etc on the various elements start adding keyframes and labels etc - the label problems as above. Now my intent is to have each of the div's in the container be clicked on and bring in the next one - in the same place in the viewport. I've noticed that when changing various elements visibility after tweaking animation to look good and then subsiquently setting on-off keyframes for visibility it would suddenly cause all elements lower in the DOM to move position and suddenly have what looked like keyframes for y axis position/transform? Is this bad practice to use the on-off visibility for elements? It meant that what should be a really simple and quick 10 second animation took about 3 hours to make, should we be not using the on-off keyframes for showing/hiding buttons that are in divs that sit on top of each other? Should i set up z-index values for all elements in the CSS files? (I saw a reference to you can assign z-index values in the 'elements' panel but I can only see 'arrange' - is this a different term for z-index?)
I'm a long time user of flash, maya, after effects, digital fusion, combustion, and many other timeline based software tools - it is fairly intuitive to me picking up new systems but the issues with on-off visibility and keyframes below in the timeline really was a very frustrating workflow. I'm used to changing and editing the whole animation on the timeline seeing what works and doesn't - deleting layers, changing timings etc, i found this way of working really slow due to changes to elements position when ones above in the flow were turned on or off. Please do suggest what I should change in my approach to using edge as compared to other animation tools as it looked great on preview but I'm a bit frustrated in using the release. Is this a bug in my release?
Where is the help and reference files for Edge? - is this screen shot it? -
I can't find any info on basic definitions of the tools and options anywhere, and can't find much on anything to do with using edge in production with existing HTML documents, please send me some links if you have them. I've seen the edge javascript API thing but is there anything else?
Cheers.
Here is the approximate code of the page for reference - I actually got the file working in the end but using 'play from (miliseconds)' instead of play from (label) and much frustration slowly editing the timeline and elements visible/hidden status and redoing animation on elements below in the timeline to get them placed correctly.
HTML:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Master Document with base styles</title>
<link href="css/master_styles.css" rel="stylesheet" type="text/css" />

<link rel="stylesheet" media="only screen and (min-width: 320px) and (max-width: 480px)" href="css/mobile.css" />
<link rel="stylesheet" media="only screen and (min-width: 768px) and (max-width: 1024px)" href="css/tablet.css" />
<link href="css/desktop.css" rel="stylesheet" media="only screen and (min-width: 1025px) and (max-width: 3000px)" />
<style type="text/css">

</style>
</head>
<body>
<div id="container">
         
            <div id="mainContent">
                <div id="mainlogo">
                </div>
            </div>
            <div id="firstButton">
                  <div id="Abutton1">
                  <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                 </div>
            </div>
            <div id="transition1">
                   <p>Wipe transition 1</p>
            </div>
            <div id="secondButton">
                    <div id="Abutton2">
                   <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                   </div>
            </div>
            <div id="secondContent">
                <div id="Abutton3">
                <p><img src="img/a_72_off.png" width="72" height="72" /></p>
                </div>
            <div id="text1">
                  <h1>Heading </h1>
                  <p>Byline</p>
                </div>
             </div>
<div id="transition2">
    <p>Transition 2 - TBC</p>
</div>
      <div id="thirdContent">
      <div id="lastbutton">
        <p><img src="img/end_icon_crop.png" width="150" height="150" border="0" /></p>
      </div>
      <div id="text2">
        <h1>Heading</h1>
        <p>Byline</p>
      </div>
</div>
    <div id="transition3">
        <h4>Small print</h4>
</div>
</div>
</body>
</html>
CSS:
(master_styles.css)
@charset "utf-8";
body {
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #19171B;
    font-family: AFBattersea;
    font-size: 100%;
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: left;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
#mainContent {
    z-index: -1;
#firstButton {
#transition1 {
    color: #FFF;
#secondButton {
#secondContent {
#transition2 {
    color: #FFF;
    height: 100%;
#thirdContent {
#transition3 {
    color: #FFF;
#mainlogo {
    background-repeat: no-repeat;
    background-position: center center;
    background-image: url(../img/960_off.png);
#Abutton1 {
#Abutton2 {
#Abutton3 {
#text1 {
#text2 {
#lastbutton {
#text3 {
(desktop.css) - I've not included the other css files referenced in the media queries as they only contain names of elements for this purpose
@charset "utf-8";
#container { /* the main holder for all of the viewport content - an image frame */
    text-align: center;
    margin-top: 0;
    margin-right: auto;
    margin-bottom: 0;
    margin-left: auto;
    height: 700px;
    width: 1024px;
.mainContent {
    height: 100%;
#firstButton {
    height: 100%;
#transition1 {
    height: 100%;
#secondButton {
    height: 100%;
#secondContent {
    height: 100%;
#transition2 {
    height: 100%;
#thirdContent {
    height: 100%;
#transition3 {
    height: 100%;
#mainlogo {
    background-image: url(../img/960_off.png);
    height: 72px;
    width: 960px;
    margin-top: 364px;
    margin-right: 36px;
    margin-left: 36px;
#Abutton1 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton2 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#Abutton3 {
    height: 72px;
    width: 72px;
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
#text1 {
    text-align: left;
    margin-top: 16px;
    margin-left: 320px;
#text2 {
    text-align: left;
    margin-top: 16px;
    margin-right: 330px;
    margin-left: 360px;
#text3 {
    text-align: center;
    text-indent: -192px;
    width: 320px;
#lastbutton {
    margin-top: 364px;
    margin-right: auto;
    margin-left: auto;
    height: 150px;
    width: 150px;

Hi,
I wonder if it's related to the multilingual capability of BPM Object presentations.
Could you:
1. right mouse click the project in the Project Navigator tab.
2. click "Project Preferences"
3. click "Languages"
Do you see multiple languages? Is English (or whatever language you're using inside Studio) the default?
When you log into the WorkSpace, could you double check the language you are using (log in -> click "Settings" in the upper right corner) -> with the "Display" tab selected, is the language you chose as the default in Studio selected?
I suspect the reason you see some but not all of the labels is because you have defined some of those labels in the language selected in the Workspace. You can add the addtional labels for the various languages you want to support if you:
1. Open a presentation
2. Click one of the labels
3. In the properties tab on the right, click the field beside the "Display" property
4. Click the button with the "..." on the right side of this field
Hope this helps,
Dan

A Problem with Comments on iWeb

I am having a problem with the comments feature in iWeb. Something has happened where people can no longer add comments to my blog or other sites. Every time they try they see this, "We're sorry. We are having problems processing your request." Does anyone have any insight on how to solve the problem? Thanks,
Kyle

You join many others in discovering a problem with the mobile.me conversion. You are probably doing nothing wrong. The "publish" button at the bottom of the iweb application is not working correctly. It is publishing to web.mac.com even though it says otherwise. When this happens the comments function in the blogs will no longer work. Solution: Do not use the "publish" button at the bottom of the iweb application. Instead, go to the very top of your screen, select "File", then publish to mobile.me or Publish all to mobile. me. I think you will find that the comments function now works.
This solution will NOT work for many of us who have lots of users that have previously been given a web.mac.com URL. There are only two options: 1. Give your users the new URL; or, put a note at the top of the web.mac.com blog that tells people it is "read only" and that comments won't work, then use a link to redirect them to a mirror image of the site with a web.me URL.. It's a pain, I know. Apple needs to fix it but the company seems to be taking a long time to do it. Must be bigger problems on their plate.
Bob

Slow iPlayer downloads and problem streaming

I bought a iPad 4 largely to use to surf the web and to download and stream from iplayer and itv player then broadcast to Apple TV via Airplay.
It has always been painfully slow trying to stream with lots of stuttering but it did work and downloads were OK - I could download 3 or 4 programs in an evening while web surfing. We recently upgraded our internet to 20MB/s and upgraded to iOS7 thinking that would fix it - it's now got worse!
Speedtest shows that I have a download speed around 4.3 to 4.8 MB/s - which is pretty similar to the speed on my boyfriends MacBook Pro over the same network.
However, the effective speed I get is more like <0.1 to max 1MB/s when downloading from iPlayer and it won't stream at all, buffers all the time and is totally pixilated. In contrast my boyfriends MacBook plays beautiful high res videos from the same site with no problem. We use a DNS service as we live in Malaysia but my boyfriend is using the same DNS on the same WiFi network through the same router with no problems. Trying to download a program it will start to count down time then jump up, then down a bit, then way up, mess around for a while then just sit at 'more than 3 hours' for the night
Being in Malaysia I am usually trying to load in UK mid-morning, which I wouldn't have expected to be the most peak time.
We have changed the route settings to disable QoS and MVV as suggested on here with no effect.
It's not in a case and I have it propped up near the router to try minimise any blockage of the signal.
Any ideas for why the iPad should be so much drastically slower at downloading and unable to stream (same problem with ITV player, no difference between using the Apps and the website) ? Any suggestions to fix?

I got same issue. any other solution to fix it . The advice solution is in vain. thx!
Issues:
While download programs, it began fast then slowly sometimes stop. The remaining timing will change from 2 min. to 1 hours.
My ISP is ok with 100MB . Anyone encounter the issues. thx
IPAD2
IOS8
Note: I install the BBC iplayer app on my smartphone with no issues. I also try to un/install the APP, but it is in vain.
thx!

I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report:          2
Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch    3908
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/

P35Neo2 FIR and problem with booting

So I have problem with booting my compie. Compie try to boot to the part of start windows, after that in case of switch into graphicis mobo going down and restarting (WinXP SP3). I think, that problem is not in PSU, cos i have 800W XILENCE (+3,3V 28A, +5V 32A, 4x+12V 20A, -12V 0,5A, 5VSB 3A), Board P35 Neo2 FIR, E7200 proc, bios 1.9 (updated). I have 5 disk and use raid function in bios. Graphic Radeon HD3650, Memory Zeppelin 4x1GB KIT 800Mhz.
I start with change of PSU from 550W to 800W but it didnt work, previus PSU had (+3,3V 30A, +5V 32A, 2x+12V 18A, -12V 0,8A, 5VSB 3A),
i try change memory, but no efect.
After update bios there was standard warning about bad cheksum, after resave Bios settings it was gone, and compie boot after that.
Any idea?
Thanks

So my problem is solved...but my feeling of this is not good...
I updated BIOS from 1.9 to 1.10, reset Bios settings, after restart i pressed F2 for load standart settings and i changed in Bios only that i am using RAID and disable disket and it works...i boot my compie into windows without any problem...
So i try change another things in Bios and my compie hangs in continous resets without booting into windows...no BSOD only restart and restart...
After reseting Bios settings and again Load to Default it works...and run windows...
There was only one new thing ... screen flick for the second with new screen about checking NVRAM ....this screen was not visible before (and maybe this is the problem), cos if i change something in BIOS about clocking and power management and other ones, this screen is by booting missing...and compie not run in Windows...
Next thing what i see, that in CPU multiplication dont work multiplication 9,5 and proc used frequency 2400 (9x) (it is E7200 on 2533)
i hope that this bios 1.10 fixed my problems...and my opinion is that P35 Neo 2 FIR is not ideal board for E7200 proc...so i m looking for another proc...and maybe another board...

Choosing between external and partner application and problem with login

We have an application on Oracle App Server 10.1.3.3 and we have an OID server.
I had taken this for granted that I should define the application as 'Partner Application' and not external application for single sign on.
Now that we need the 'PASSWORD' retrieved by application, we are considering defining it as an external application.
There are at least two problems I have encountered defining the application as external:
1. 'pageConfig:serverDate' is among the login form's inputs in the login page, but I can't set it in orasso 'Edit External Applications' page
2. After login using SSO as external application and when I click on the application's new link, the login page is shown with the username and password field filled, but I have to click on login button anyway (no automatic and invisible login).
I will be very grateful if someone gives a general view on the differences between external and partner, whether in this case external has to be used or partner and finally give some comment on my specific problem with login button and manual login.
Thank you

Just some information :
- The problem with LOGIN page exists. I don't have that problem with for example GMAIL when defined as external application, but with my applications in Oracle Application Server.
- There is also another thing I don't understand. The link to external application is something like:
javascript:open_jwindow('../ealogin?ID=76D4766','76');
and couldn't be executed outside pls/orasso
in other words we can't give that to our users, can we? They should login to orassso and see that?
We don't want to involve them in Identity Management...
Any help is appreciated....
Regards

Slow in start-up + problems with Entourage

Since I have installed Mac OS X Lion I do have some problems.
My Macbook Pro doesn't start up as fast as he used with previous Mac version, how come? I unchoose the box to re-open programs at start-up.
Another thinhg, from time to time my Entourage (2008) needs to be closed to sent a problem report to Microsoft, before Mac OS X Lion I had no problems with this.
Will there be soon an update which fixes all these bugs?

I doubt you will like this suggestion, but since you installed a new drive I would recommend doing this:
Extended Hard Drive Preparation
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger or Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Reinstall Snow. If you continue to have problems it could be got a slightly defective DVD or you may have marginal RAM.

New Mac Pro 2.8 and Problems with Aperture

Hi,
I just bought a new Mac Pro 2.8 with the standard 2GB of RAM. My main application is Aperture. Since I loaded it and pointed to my library, the system runs *very* slow when I am in Aperture. I get a lot of spinning wheels for everything I do ... including just switching between pictures. My library is ~130GB and when I tried importing my iPhoto 8 library, it crashed. Now when I try to delete the import project, Aperture hangs. I am very surprised by all of this. Any thoughts or suggestions?
An interesting side note, iPhoto with 140GB library works great.
Mac Pro 2.8, 2GB, 320GB Drive, 130GB Aperture Library, Leopard 10.5.1
Thanks,
-chris

Chris-
Unfortunately Apple reps are seldom good counselors as regards application performance. They are after all retail sales people, not users. Better advice is available from user forums typically populated by folks with years of real-world usage experience as well as education beyond that typically found in retail sales.
RAM is inexpensive now, so IMO MPs should have more RAM, adding two 2-GB sized DIMMs as a minimum add. For heavy apps like Adobe CS or Aperture I recommend adding 8 GB RAM, always minimum 2-GB sized DIMMs to avoid wasting limited slots. IMO RAM is the cheapest performance enhancer and most of us handling heavy graphics will want even more RAM, all slots, over the life of a new MP.
I would recommend buying 4-GB sized DIMMs except that they currently cost much more per GB.
Aperture has always required an advanced graphics card for good performance, even with MP towers. Do not be surprised if adding RAM does not provide a magic bullet. If you use Aperture professionally you will want to add an 8800 GT card.
All that said, Aperture ran adequately on my MBP even with the stock 2 GB RAM. Odds are very high that the slowdown you observe is not simply hardware based. I strongly recommend that you carefully pursue every one of the points discussed in the excellent Bagleturf speed discussion, and especially get fully conversant with Previews alternative settings.
Please describe your hard drive(s) configuration, including how full, since mass storage also bears heavily on performance.
Good luck!
-Allen Wicks

IWeb: problem with comments

On my iWeb page I have comments allowed on my blog. Yet no one can post comments. If I publish a new article with the comments allowed, iWeb comes back with an error server message.
Mac OS X 10.5.4
iWeb 2.0.4

I'm having the same problem with blog Comments (iWeb 2.0.4). Clicking on "Add a Comment" gets this message; "We're sorry. We are having a problem processing your request." I get the same message in my business site photo gallery where you can leave a comment about a photo.

Slow loading blog and problems with comments

Similar Messages

Maybe you are looking for