Slow loading files in Dreamweaver

I am noticing that any file that I'm opening in DW takes
FOREVER to load. I have no idea what woudl cause this.
I'm running a MacBook Pro, Leopard, with DW CS3...
This is sooo frustrating. Any help would be awesome.

Are your files local to your computer or are they on a
remote, shared
network drive? Are you running an antivirus real-time scan?
Are your files
really large (i.e., number of lines of code)? Is your site
really large
(i.e., number of files)? I'll think of more questions in a
minute.... 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"radicalrob" <[email protected]> wrote in
message
news:fljmkn$bgq$[email protected]..
>I am noticing that any file that I'm opening in DW takes
FOREVER to load.
>I
> have no idea what woudl cause this.
> I'm running a MacBook Pro, Leopard, with DW CS3...
>
> This is sooo frustrating. Any help would be awesome.
>

Similar Messages

PP suddenly very slow loading files, generating peak files

Project from yesterday suddenly extremely slow loading, syncing files and generating audio peak files. Using PP 2014.2 on HP Z800. SSD system drive, internal raid and three USB 3 drives connected to USB3 pci-e card. Suspect drive could be hanging up but not sure how to test since all was fine last night. Files are HD 23.98 quicktime prores

I also notice my CC connection needed to be reset several times. The Control Panel internet settings keep switching back on LAN from Automatically detect settings to Use a proxy server. My computer is dual 5650 processors, 24 g ram, so don't see that as problem, especially since this worked yesterday.
Could really use help ASAP
Thanks

Load Fail of SWF file in Dreamweaver CS4

Hi,
Could you tell me what I am missing in my files?????
I am missing my Top Banner and the .swf file in Dreamweaver? I can see it in the source files but that's it.
I have supporting files from my Flash-Slideshow-Maker, but can only see my flashshow if I embed the file from SkyAlbum.com (Album# 247097) which is very slow to load.
Have I not loaded all the files for it or something?
http://www.aeroadvertising.ca
Thank you!

Mark A. Boyd wrote:
MyNameIsEmmy wrote:
I don't know what I did wrong, I can see all the files in my root folder, but I did give up trying until I find the tutorial for it...
Really? I still get 404 "Not Found" for all of them, same as yesterday.
http://www.aeroadvertising.ca/aeroimages.html
HTTP/1.x 404 Not Found
http://www.aeroadvertising.ca/fs_aux.html
HTTP/1.x 404 Not Found
http://www.aeroadvertising.ca/aeroslides.xml
HTTP/1.x 404 Not Found
http://www.aeroadvertising.ca/aeroimages.swf
HTTP/1.x 404 Not Found
Do YOU actually see something with those links?
I decided to embed the skyalbum code, but the banner files are still missing? ACE said it was a poor path, but now that I deleted it why won't my top banner images work now-on either page?
Deleted what? Do you mean this?
http://www.aeroadvertising.ca/elements/aero_banner.jpg
I see it fine on http://www.aeroadvertising.ca/ and http://www.aeroadvertising.ca/aero_location.html (if that's what you mean by "either page".
Mark A. Boyd
Keep-On-Learnin' :-)
OK, Uncle, I give up.
There is no top banner, on my firefox, on either page... Do you know where the beginner tutorial is for all this?
Em

Page not found, slow loading times CC Files

Hi,
Two weeks ago I reported that there were CC files problems like 'page not found' errors and slow loading times and pages not even showing anything. Those problems were temporarily resolved but are back as of today.
Please fix this because for me this is not workable and I guess for many others. I've already moved part of my design files away from CC Files and am now reaching the point were I want to abandon this beta-ware altogether.
I'm living in Europe, maybe this gives additional info. Maybe server problems only in this continent?
Thanks for looking into this.
Jan

So what product would you advice me to file this bug report under? There is no Creative Cloud Files entree or similar.
I'm not sure I'm taken by Adobe support channels policies. if I tweet a complaint some employee tell me I'll be called back by support. Instead of being called back I get asked per email to report on the community forums, when I post on the forum someone tells me to file a bug report. Ehhh...
Time to move on.
Jan

Quicktime audio files extremely slow loading on webpage

I have loaded four audio files onto one page of my website that I created using iWeb. This page is incredibly slow loading and just won't play on many people's computers (mac and pc alike) (including mine!).
Is there something I can use for audio files besides the quicktime player? Is there a way to have the page load faster?
Thanks in advance.

Welcome to the Apple Discussions. Yes. You can use a flash player like the examples on this demo page: Audio Players.
More player types and even a jutebox player is explained and demoed on Roddy's iWeb for Musicians sitge on this page:Music Players.
OT

How can I open a cfm file in Dreamweaver CC using a Mac? Added to the Extensions.txt. Getting error adding to preferences-- file types.

I am trying to open Cold Fusion files using Dreamweaver CC. We've never had a problem with the versions before the Cloud. My co-worker can open using a PC, but I'm using a Mac. I can connect to the server and see the files, but when I open, it opens the file in text editor. I have tried adding the extensions to the Extensions.txt file (they weren't there previously), editing the MMDocumentTypes.xml file (the file type WAS in that file), adding to the Preferences-->File Types/Editors (I can add the extension, but when I try to choose Dreamweaver CC as the editor, I get an error "You cannot use Adobe Dreamweaver CC as an external editor. Please choose a different application."). When I right-click the file, I do not see an "Open With" option, only "Open". Does anyone know of another trick that could make Dreamweaver CC more than an HTML editor for Mac? I cannot us CF Builder - no approval for loading the extra files server-side to use that IDE.

Have you tried these suggestions...
Open ColdFusion documents in Dreamweaver CC

Missing Images in swf file in dreamweaver

Hello,
I was hoping someone could help me. I made a image slide show
in Flash (CS3) and wanted to put in in Dreamweaver (CS3). I
published the file in flash and went over to dreamweaver and did
the insert - media - flash command and added the .swf
When I test the movie, the buttons and the frame shows up but
not the images. Any ideas on why? When I test the html file, it
works fine. When I test the movie its self, it works fine too. Its
only when it is in the Dreamweaver file do the images disappear.
1. I have the required AC_RunActiveContent.js. file with my
swf.
2. I tried copying the code from the html file that was
generated by my swf, but when I test the file in dreamweaver, an
error comes up saying that i need the AC_RunActiveContent.js.
3. I have flash files on the site that work just fine, it is
just this one that is being stupid. I published it as flash version
7, 8 and 9. Nothing works.
Thanks for your help in advance!
Gab

You haven't told us whether you are using RH for Word or RH HTML to generate your CHM.
Please read Before You Post as it has been written to help you get a quicker reply. I will shortly be travelling and unable to pick up your reply for most of the day so unless anyone else can chip in once you advise us which, there will be a delay in helping you.
If RH HTML:
Your problem sounds like this one - http://forums.adobe.com/thread/490223?tstart=0 as there the images show in Windows Explorer but not in Project Manager or the WYSIWYG.
You say
When I generate the chm file there is mentioned that no graphic is loaded.
Do you mean there is an error message? What exactly does it say?
See www.grainge.org for RoboHelp and Authoring tips

Insert Photoshop Web Gallery swf file into Dreamweaver

So i tried to take a shortcut, and created a flash photoshop
web gallery and placed the "gallery.swf" file into my html file in
Dreamweaver. However, it is showing a blank white screen (i'm
guessing it can't find the images?) but when I view it on my hard
drive, it is working fine, just not in dreamweaver or any browser,
even after I upload to my server. Any help would be GREATLY
appreciated!! I've also tried pasting the body html code from
"index.htm" that photoshop creates, as well as move my image files
to the root folder where the swf is, but that doesn't work either.
I have my scripts in the same directory, and not in
subfolders.

Kizat727 posted in macromedia.dreamweaver:
> and the link is
>
> www.micromediapubs2.com/dyers/portfolio.html
That page is very different from the code you posted and I
know nothing
about Geoff Stearns' FlashObject code.
For the above link, I see nothing in the source code that
attempts to
load a .swf file. However, it is linking to
AC_RunActiveCon.js file in
the wrong place:
GET /dyers/assets/flash/pages/AC_RunActiveContent.js HTTP/1.1
Referer:
http://www.micromediapubs2.com/dyers/portfolio.html
HTTP/1.x 404 Not Found
The file is actually here:
/dyers/Scripts/AC_RunActiveContent.js
So if you actually do have a page in the dyers/ folder that
links to a
.swf file, just make sure the link to the .js file is
correct.
Most likely, change this:
<script src="assets/flash/pages/AC_RunActiveContent.js"
type="text/javascript"></script>
to this:
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
Mark A. Boyd
Keep-On-Learnin' :)

Slow loading on website

I am new to Quicktime Pro, but have found it very easy to use with great quality results endoding my FC files for the web. My problem is that when a user clicks to open my video sample, the file has a very slow load time. Some specifics:
input file: 1.8 GB file exported from FCE as uncompressed 8-bit
output file: in QTPro - encoded with H.264, 15 fps, 100 key frame, 800 kbps, set for streaming (fast start), 640X480, deinterlacing checked. file size 8 MB.
As I said, the quality is great (except that the deinterlacing filter doesn't seem to do anything), but the playback outpaces the load very quickly. It takes almost 2-3 minutes for the file to be ready to start automatically. I've been told that an 800 kbps file should load in a few seconds.
Is there anything you could tell me to enhance the load time? I'm wondering if I'm missing a simple step since QT has been so easy to start to use.
Thanks so much for your help!! Jo

Nothing at all wrong with your QuickTime file but your html code at http://aftglow.com/ directly links to it rather than calling the quickTime browser plug-in.
That may be the source of your troubles. You need to use special html page code for QuickTime:
http://developer.apple.com/internet/ieembedprep.html

Slow loading website

So I just finished my website but it loads piece by piece and
a slower than I would have liked. is there anyway to improve this
that would not require me redoing it all over? The site is here:
http://www.martinpaulphotography.com/index.html
thanks,
Martin.

A couple of things:
(1) If the music is in your flash file, you can delay it a
few frames. Too much in the first frame slows loading. You might
consider adding a volume X button for those that want to browse w/
sound.
(2) Optimize the images of your page. There are a lot of them
which is one of the reasons for the slow load.
Is that your musical composition? If not, you should post
your use with permission on the front page to oblige the author's
permission. If you don't have that....lose the music. Be careful
here, especially with professional sites.
-Lokey

Can't edit php files in dreamweaver, access to site root denied

Can anyone help me please?
I've recently purchased a Macbook Pro after my PCs failed on me and also had to get a Creative Suite Web Premium. I have always used Dreamweaver to edit my php files. In Windows XP, I had to run the programme to run as an Administrator to edit php files. Now I have not a clue how to do it on Mac! Each time I tried to save a php file, a dialog box appear stating: Access to Macintosh
HD:Library:Webserver:Documents:Untitled-1.php was denied
Regards
Sinead

You shouldn't have to do that on the Mac or Windows. Only thing I could find that would suggest loading files from there is a tutorial by David. And although I would normally agree with him, keeping the files in a system library folder for a testing environment is really unnecessary. I'd recommend moving them into your /Users/{username}/Sites folder. There is already a modification to the apache server to recognize that as http://localhost/~{username}. Or install something like MAMP that is in the Applications folder.

MDT 2012 + WinPE 4.0 + VMWare ESXi - Hangs "Windows is loading files" booting into PE

I'm trying out using MDT 2012 and WinPE 4.0, upgrading things. I've recreated things following templates in MDT 2012. I'm also using ADK and WinPE 4.0.
Issue I'm seeing is upon restarting into WinPE I see the screen showing Windows is Loading Files and the progress bar. I see the first one load through and then the second slower one load through. Once progress bar fills, it just does nothing and I'm left
looking at a complete progress bar.
I was trying obviously first using VMWare ESX 5.0 with no success, subsequently tried a couple of physical machines and those had no problems. I still want to get working on ESX since that will help speed up development and testing of the rest of the stuff
I need to upgrade. Tried a variety of SCSI controllers within ESX vms. I tried VMWare Workstation 9 with the mixed results as with the LSI Logic Parallel SCSI controller had success but not the others.
I of course at first tried making sure drivers were added with no change, although that still could be an issue with drivers I found to put in being incorrect.
More interestingly though is that I can of course install Windows 8 from install media just fine on these hardware, as well as if I create an ISO from the deployment share and boot to that it works just fine, so it seems to just be an issue when booting
to WinPE on disk.
Any ideas are greatly appreciated. Thanks.

I did have the same problem with ESXI 4.1 and Windows 8.
I found a full solution with the following:
download the linked file at the bottom of this post and add the following options to your vmware-configuration
file:
bios440.filename =
"<full path to rom image>" --> if file in folder of vm only "bios.440.rom
mce.enable = TRUE
cpuid.hypervisor.v0 =
FALSE
vmGenCounter.enable =
FALSE
This worked for me for several environment with an older ESXI-invironment and Windows 8.
http://communities.vmware.com/servlet/JiveServlet/download/2139717-98102/bios.440.rom
I can confirm that this works also! Many thanks!
ESXi 4.1 with WinPE4.0

Does iCal's speed slow as file grows?

I'm concerned that iCal is going to slow down as the program gets loaded up with events and to do lists.
Is anybody using iCal for a small business making 20 to 30 entries per day and seeing a slowdown in the program's speed?
We sync. iCal with three computers and we need the program remain fast to use and sync. for our staff.
Is this free iCal program adequate for a small business or should I be looking at a program like Now Up to Date & Contact for my needs?
I spoke to support at BusySync (busymac.com) as an alternative to .Mac sync. for iCal and they said the had no reports of iCal slowing down as the file gets larger.
Any comments are appreciated.

It's worse than that, iCal doesn't seem to slow as files grow, it seems to slow randomly and no one on this forum has the faintest idea why. Search "slow" and look back. There are hundreds of entrys from people who've experienced iCal slowing to a snail's pace and no one has a solution. I made the mistake of moving my business (maybe 1 or 2 entries a day) to iCal and now I'm stuck waiting 10 seconds everytime I want to make the smallest change. AM to PM - 10 seconds, one calendar to another - 10 seconds. It takes even longer to duplicate an entry or copy an entry. I tried to change fourteen entries to a different calendar today and had to sit through seven minutes of the spinning beachball waiting for that simple change. It doesn't sync reliably with the four other Macs I own and I'm also convinced it's crashing iTunes on me everytime I try to sync Contacts and Calendars. I've been a Mac devotee since 1987 and I swear this is the worst single program Apple has ever written. In System 9 I was able to write a better calendar program in Hypercard. It's not worth the time it takes to install. I'd think twice before I used it for anything important!
I wish someone would at least acknowledge the problem!!!!
Peter May

Parser Error Message: Could not load file or assembly 'DreamweaverCtrls

Hi,
After attempting to view my first asp.net page I was greeted
with the following error:
Parser Error
Description: An error occurred during the parsing of a
resource required to service this request. Please review the
following specific parse error details and modify your source file
appropriately.
Parser Error Message: Could not load file or assembly
'DreamweaverCtrls, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=836f606ede05d46a' or one of its dependencies. The
system cannot find the file specified.
Source Error:
Line 1: <%@ Page Language="VB" ContentType="text/html"
ResponseEncoding="iso-8859-1" %>
Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
%>
Line 3: <MM:Insert
Line 4: runat="server"
Source File: /s4/admin/wiki1/detail.aspx Line: 2
Assembly Load Trace: The following information can be
helpful to determine why the assembly 'DreamweaverCtrls,
Version=1.0.0.0, Culture=neutral, PublicKeyToken=836f606ede05d46a'
could not be loaded.
I have deployed the files using dreamweaver and it says "no
files to deploy". I have a bin folder with the correct .dll in it,
in the correct root folder. So whats happening??
Please help
Cheers
G

Are you testing on the server or locally. If the latter is
true make sure
that a copy of the controls is in a bin folder at the
C:\inetpub\wwwroot
level.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"graham6117" <[email protected]> wrote in
message
news:e2ngbc$sib$[email protected]..
> Hi,
>
> After attempting to view my first asp.net page I was
greeted with the
> following error:
>
> Parser Error
> Description: An error occurred during the parsing of a
resource required
> to
> service this request. Please review the following
specific parse error
> details
> and modify your source file appropriately.
>
> Parser Error Message: Could not load file or assembly
'DreamweaverCtrls,
> Version=1.0.0.0, Culture=neutral,
PublicKeyToken=836f606ede05d46a' or one
> of
> its dependencies. The system cannot find the file
specified.
>
> Source Error:
>
>
> Line 1: <%@ Page Language="VB"
ContentType="text/html"
> ResponseEncoding="iso-8859-1" %>
> Line 2: <%@ Register TagPrefix="MM"
Namespace="DreamweaverCtrls"
>
Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,cultu
> re=neutral" %>
> Line 3: <MM:Insert
> Line 4: runat="server"
>
>
> Source File: /s4/admin/wiki1/detail.aspx Line: 2
>
> Assembly Load Trace: The following information can be
helpful to determine
> why
> the assembly 'DreamweaverCtrls, Version=1.0.0.0,
Culture=neutral,
> PublicKeyToken=836f606ede05d46a' could not be loaded.
>
>
> I have deployed the files using dreamweaver and it says
"no files to
> deploy".
> I have a bin folder with the correct .dll in it, in the
correct root
> folder. So
> whats happening??
>
> Please help
>
> Cheers
>
> G
>

AME CS6 painfully slow loading large quantities of clips.

I'm using AME CS6 to transcode clips to prepare clips for delivery to a client that will only accept OP1a MXF's. I have hundreds of clips to transcode and AME CS6 is unbearably slow loading them. Usually I set up a watch folder but in this case I have two batches to run, one with about 750 individual clips and one with about 450. Using watch folders just completely brought AME to it's knees trying to transcode a file while updating the queue. I've just spent two hours loading the clips into AME by dragging/dropping them into the queue (that time includes time spent waiting while AME hangs while trying to change the codec/output setting).
Earlier versions of AME were no where near as slow as this. Even just scrolling up/down the queue that used to be fluid is now a click, wait, update..click, wait update process. I could have copied the files from drive to drive in less time than this took to load/index. Is there anything that can be done to speed up this process?
FYI
Supermicro workstation
Win7/64
Dual Xeon X5650
48Gb RAM
nVidia Quadro 4000
2x nVidia GTX 580
Red Rocket
SSD (OS)
RAID-0 (media-internal)
RAID-0 (render-external)

lasvideo, thanks but that's not the same problem I am having. Appreciate you chiming in though!
Stephen, thanks for writing. It's a pretty massive project and because clips often criss-cross between segments I have been working everything inside the same edit. I also wanted to see just how hard I could push Premiere (I've been using Premiere for 7 years now). Mind you once everything loads it still does just fine. Edits like a champ. Just was a bit frustrating with the load time.
On #1, I don't have time machine set-up anymore as I ate up all my space.
On #2 this is an interesting suggestion. I'm letting project manager analyze my project right now. I've never used project manager to break off individual edits so this should be interesting. Yes, just me on one machine. I'm shooting and editing at the same time and also doing graphics so I reckon by December. I have two full backups of all footage and edit files and save to a new edit file every couple of days (plus I have auto-save rolling).
And for whatever reason, today when I opened a different project and then went back to the large project, suddenly the problem dissappeared. Weird but there it is. All 20,000 clips now load again under 4 minutes.
Thanks for the assistance.
Best, Dare

Slow loading files in Dreamweaver

Similar Messages

Maybe you are looking for