Slow loading of reports and forms
hi,
i have created forms and reports- but they take atleat a minute to load when i goto the customize form of any report- the report running itself does not take time..
i have created the WWA_MODULE_BINDINGS_IDX1 and WWA_MODULE_LOV_BINDINGS_IDX1 indexes. it does not help- what can i do to speed up the loading time of the forms and reports?
Andrea,
The problem with forms performance is applicable only to Portal 3.0.8,
this is bug # 1721741, the workaround is to create 2 additional indexes.
The missing indexes are:
CREATE INDEX WWA_MODULE_BINDINGS_IDX1
ON WWA_MODULE_BINDINGS$(
SUBSCRIBER_ID,
MODULE_ID,
MODULE_VERSION,
MODULE_BLOCK_ID,
MODULE_ATTR_ID)
CREATE INDEX WWA_MODULE_LOV_BINDINGS_IDX1
ON WWA_MODULE_LOV_BINDINGS$(
SUBSCRIBER_ID,
MODULE_ID,
MODULE_VERSION,
MODULE_BLOCK_ID,
MODULE_ATTR_ID)
connect via sqlplus as Portal schema owner and create those indexes.
Those indexes are missing in the standard fresh install but present if
you run an upgrade from versions 3.0.6 or 3.0.7.
Please note: This workaround can be applied ONLY to Portal forms
version 3.0.8.9.8. Earlier versions of the Portal do not need those
indexes. This bug is fixed in 3.0.9.
Thanks,
Dmitry
Similar Messages
-
Report and Form - Nothing in Session
Version 2.0
I have a Report and Form combination. The "Edit" link is set to the seq_id. When the "Edit" link is clicked on the report and the form populates with the information, I then clicked on the Session link in the dev bar and there is nothing in session state except for my seq_id.
I would have expected to see all my information that is populated on the form. Am I missing something (except for my information in session :) )?
Thanks,
JoeArie,
That's what I have in my HTML Header section:
function compute_total_cost()
document.getElementById('P2_TOTAL_COST').value =
parseInt (document.getElementById('P2_DATA_COLLECT_FORM_PREP').value) +
parseInt (document.getElementById('P2_PRINT_COST').value) +
parseInt (document.getElementById('P2_MAIL_COST').value);
and a call of onChange="javascript:compute_total_cost();" in each of the costing HTML Form Element Attributes. But if there's noting in session, how can the values be accessed.
I also did start a new thread for this per Scott's instructions :)
Thanks,
Joe -
How to get an option to create a page type as "Report and Form"
Hi,
When creating a new application, APEX 2.1 gives an option to select a page type as "Report and Form". Once we have already created an application, how to get the same option?
Thanks,
HozyGot it thanks.
I'm still not able to make the search/go and reset buttons work. When I use to create these pages at the time of application creation, these use to come as default. Any clue on it? -
More than one column retrieved in "report and form" page
HELLO!
let's see if anybody can help me with this... i'm sure it's a stupid problem but i really don't know how to solve it.
when i create a new application with APEX, i want to add a "report and form" page. i select the table where de data is, and then click on add page. then i go to the page definition for the form that just has been created but there's no option for selecting more than one column as the link column...
i mean, i want to show a report with all the columns from the table and then, by selecting one of them, the form should display that column but the problem is that the primary key of the table is formed by 6 columns and i always receive the "more than one column retrieved" message as it's trying to retrieve the information using only one column. is there any way to make the link column be composed by 6 or 7 columns??APEX can handle 2 primary key for one table (if you are using the automated fetch row and the automated process row).
In your case, you'll have to create your own "fetch process (page rendering)" and "DML process (page processing)".
Flex
Homepage : http://www.insum.ca
InSum Solutions' blog : http://insum-apex.blogspot.com -
I used the wizard to create a report and form on a table. When the user hits the edit link on the report, it brings up the form (so they can edit) on a new page. Instead of this, I want the form to show on the same page as the report. What is the best way to do this? Should I create 2 regions on the same page (1 for the report and 1 for the form)?
Bob,
take a look at
Re: How to get a form to appear on the same page when a button is clicked?
at the end you can login to a (my) workspace to see how it's done.
Leo -
How to Delete KE30 Reports and Forms?
I want to delete some KE30 reports and forms associated with them. The QA and PRD environment are in synch in regards to the number of reports, but Dev environment is not in synch with the QA or PRD system. What would be the best to do in this case? Can we delete these reports directly in the PRD system? If that is possible, I can first delete these reports in QA and then same reports in PRD so the two boxes remain in synch.
Hi,
You can delete in each client independently. But, normally in Production client you will not have authorization to delete. Best business practice is to develop the report in Dev and then transport to QA > PRD.
As your development box is not in sync with the other two boxes, probably, in your system the reports are directly created in Production client.
Thanks
Murali. -
Could any suggest a very good book for Oracle reports and forms which has all the details of the reports and forms from the fundamentals?
Oracle tutorial..
Although the first two of the following links are for older Forms versions, the concepts are still valid across all Forms versions.
A Tutorial on Oracle9i Forms and Reports
iSelfSchooling - Basic Introduction to Forms
Oracle Forms 10g: Demos, Tips and Techniques
http://www.dotnetspider.com/resources/22433-Triggers.aspx---Different Trigger types
http://sheikyerbouti.developpez.com/index_en/
http://www.slideshare.net/magupta26/oracle-forms-tutorial
http://www2.cs.uh.edu/~ceick/3480/Customized_Oracle_Forms.pdf ---Creating Customized Oracle Forms
http://www.youtube.com/watch?v=0BBiHvHzPYE -- video
Hope this helps,
Oracle Reports Tutorial...
Here few link...
1. http://docs.oracle.com/html/B14364_01/title.htm
2. http://www.scribd.com/doc/3960412/Basic2-Oracle-Reports-10g-Tutorials
Video Tutorial
http://www.youtube.com/watch?v=Fum3MJm5yKU
Hope this helps
If someone's response is helpful or correct, please mark it accordingly. -
Importing Reports and Forms from Oracle to Portals
Hi,
I have read somewhere that it is possible to import all ready created reports and forms from Oracle and view them as a Portlet in Portals. Is this actually possible and if so where do I begin??
Could there be an issue with rights, this is all new to our DBA and we have only just got permission to publish forms created in Portals to the repository. Any ideas??941175
Welcome to the forum. Please take a while to go through the FAQ to be found to the top right of the page.
Your issue is more to do with batch files rather than Forms. The only relation with Forms, as I see it, is that you will be using HOST/CLIENT_HOST to start a batch file with the file name to be deployed as a parameter passed to it.
You need to rewrite either a CMD batch file or a Powershell script to achieve what have set out to do.
For CMD batch files look up http://www.robvanderwoude.com/battech.php , or any of the other excellent resources available on the internet.
Regards, -
6i Reports and Forms Download Software
I am not able to fine the 6i Reports and Forms from OTN download. I am at 11.5.9 using Sun. Can you help me to find where I can download the tool? I am new at the company. Thanks!
Hi,
Use the following link and click on "Download" option for Oracle Softwares.
http://www.oracle.com/technology/index.html
Regards,
Sailaja -
I created an application and added a Report and Form page.
I cannot get the form to link properly to the source in the Report. When I click on the edit link in the report - only the columns set as link columns in the Interactive Report Attributes show data. There are only 3 fields provided on that page to link columns to. How do make all my form fields link to the the row clicked on the report?thanks for responding. It doesn't seem to work for more than 3 form fields. The first 3 work fine but after that any other field just shows the name of the column in the text box and not the actual value from the database/report. I did exactly what you told me to - clicked on the edit in Report Atrributes tab next to the column in my form "Acctnum" -> chose Link -> then Name/Value - set Item 1 to P2_ACCTNUM and Value to #ACCTNUM# - applied the changes and still doesnt work when i edit the form. All i see is "acctnum" in the field instead of the actual acctnumber.
-
How to Freeze Headers of tabular report and Forms - and Column Alignment
I have executed the solution listed in the following thread in my tabular form.
Re: How to freeze Headers of tabuar report and Forms in APEX 4.1
This works pretty well in my tabular form, but I do have a question and was wondering if the forum users can shed some light.
The tabular form has some display only fields and some editable fields. For example, columns A - G are display only fields (Display as Text - escape special characters, does not save state) and other fields that come after are editable. When there is data in the display only filed, every thing looks fine - column headers are aligned with the tabular form column data. But when there is no data in, one or more of, these display only fields, the tabular form columns/data shift to the left and now the column header does not align with the column data.
Following are the specifics
Full APEX version - 4.0.2.00.07
Full DB/version/edition/host OS - 11g
Web server architecture (EPG, OHS or APEX listener/host OS) - HTTP Server OAS
Browser(s) and version(s) used - IE 8
Theme - Sand-10
Template(s) - was using the Standard Report (then created the one found in the thread listed above and substituted with the new one)
Region/item type(s) - Chart Region
Links to related posts and threads (using the methods in the FAQ) - Re: How to freeze Headers of tabuar report and Forms in APEX 4.1
How do I set the column widths so the column header aligns with the column data?
Thanks,
DP
Edited by: DP on Dec 13, 2012 3:09 PMHello DP,
>
The tabular form has some display only fields and some editable fields. For example, columns A - G are display only fields (Display as Text - escape special characters, does not save state) and other fields that come after are editable. When there is data in the display only filed, every thing looks fine - column headers are aligned with the tabular form column data. But when there is no data in, one or more of, these display only fields, the tabular form columns/data shift to the left and now the column header does not align with the column data.
Full APEX version - 4.0.2.00.07
Browser(s) and version(s) used - IE 8
How do I set the column widths so the column header aligns with the column data?
>
As right now I don't have the APEX and browser versions mentioned, I will set up the environment and look for the issue faced by you.
Regards,
Kiran -
Urgentpls : How to find the Oracle reports and forms version in Unix prompt
Hi,
How to find the Oracle reports and forms version in Unix prompt.
Please give the steps
ThanksI need to check the version of Oracle forms and reportsExample :$ frmcmp.sh -h | head -1
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
$ rwrun.sh 2>/dev/null | head -2 | tail -1
Report Builder: Release 10.1.2.0.2 - Production on Wed Mar 10 11:17:55 2010
$ -
Which modules of oracle apps have reports and forms?
which modules of oracle apps have reports and forms? Do I need to have strong programming knowledge to learn these?
Plz try to respond as I need to get started with the traiining asap.Most of Oracle Apps modules come with reports and forms. You would probably need to create your custom module (with custom forms/reports) instead of modifying the standard Oracle Apps forms and reports. Start with "Oracle Applications Developer's Guide" and "Oracle Applications Concepts" manuals, it should be helpful.
Oracle Applications Concepts
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/11iconcepts.pdf
Oracle Applications Developer's Guide
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115devg.pdf
Applications Releases 11i and 12
http://www.oracle.com/technology/documentation/applications.html -
i have installed PCM14 and BI Publisher, when i want to import reports and forms in PCM administrition, problem happened, " data model definition not found for "us/sql/ ",how to do it?Primavera Contract Management User Community
Hi Liu, It could be a bunch of things, but as a start point I would suggest: 1) The Reports & Forms path being entered in Contract Management Administration is incorrect. If working with Multi-Project Reports or Group Level Letter Templates, the incorrect path may be located in the Primavera Administrator Utility (admincm.cmd). 2) Make note of the data model or report being referenced in the error message. Locate that affected data model or report on the BI Publisher server, and remove it. Then attempt to Import Reports and Forms again. Best regards, Matías
-
Post Author: mel
CA Forum: .NET
I am using CR XI R2 SP2 and I am experiencing slowness when accessing a report within my application. Though the report is always displayed faster the second time, the first time the report is displayed can take anywhere from 5 to 20 seconds. Overall, the time it takes to display the report is inconsistent. I was able to trace the source of the slowness to the ReportDocument.Load(ReportPath) call. Can anyone please offer suggestions as to the cause of the slowness, and how to improve the speed?
Thank you.Post Author: ole
CA Forum: .NET
Yes, I have same problem. When using CR in .NET-Application the first time, the initialisation is very slow. To work around I made a background threadafter starting the application with some CR operations like ReportDocument.Load(). When user will start CR really the initialization is done. Another fact: On users machine database connection has to be set dynamically by application at runtime. On Reportdocument.load the report looks for developper database (of course not reachable). Of course that is extremely slow. I made a workaround to load report once slowly, change database connection, and save report with new database connection for the next time. Next time loading is much faster.I don´t understand, why CR is looking for an useless database server when loading before I can set the real connection. Nevertheless: Performance of CR.NET should be improved.
Maybe you are looking for
-
BASIS--to restrict authorization for a PO document type & 122 movement type
Dear All, Plz guide me how to restrict authorization for a PO document type & for a movement type 122 i.e. for eg. if a user has authorization for PO document type IC then he should not be able to rum movement type 122 for any T-code he runs. Thanks
-
Disable the Copy and Paste option in keyboard [Textbox control] Windows phone App
In Windows phone 8.1 WRT app, I want to disable the copy and paste option in the keyboard for the textbox control Please let me know if any possibilities and if you have the code snippets Please share it .
-
hi friends could u pls anybody send the realtim issues of profit center account and internal order and cost center account . [email protected]
-
Try to copy data from broken drive
I have external drive which had time machine backup, but the surface is broken (will never get another WD drive), what would be the best way to try and copy as much data as i can? if i use Finder it's just gets stuck, but i want to leave it overnight
-
Set maximum length for JFormettedtextfield
Hi, how can restrict user to fill only 10 characters in JFormettedtextfield . thanks in advance