Slow logout on remote connection.

If I use CDE, I login and out fast. If I use JDS, I login and out takes forever. Is JDS so much more resource intensive?

The simple answer, unfortunately, is "yes", although (a) it's getting better all the time, and (b) that's not to say there isn't something else going on in your particular case.

Similar Messages

Thinking of making the switch--Will I be able to remotely connect?

I'm yearning to return to the Apple fold having left years ago after owning mutliple Apple ][ +'s, e's, c's and GS's. I've been in the PC environment for years but want to come back. I currently use PC's in three locations: at work, at my primary home and my secondary home. I work at a university and do a lot of work from home--my primary home during the academic year and my secondary home during the summer. I currently use Windows XP Pro and the Windows Remote Desktop allows me to connect directly to my work computer for everything, email, file manipulations, creation of Word, PowerPoint, etc., so to others it appears I'm in the office for everything--if only I could get it to answer my phone!
It's time for me to replace my computer at the office and I have the opportunity to get a very capable Mac Pro and I really want to do this, but I can't without figuring out the work from home connection. I've read a little about the Apple Remote Desktop but it seems to be way more than I need--it's an IT systems administrator tool.
I can probably upgrade at my primary home later this year but the opportunity to make the change at work will be near term as we approach the end of our fiscal year (30 June). And I probably cannot personally afford Macs at both my primary and secondary homes this year. So my question is two fold:
1-for the long term, if I did have Macs at all three locations, could I remotely connect to my work desktop and work from home?
2-for the short term, if I had a Mac Pro at work but Windows XP Pro machines at home, is there any technology that would allow me to connect from my Windows PCs at home to my Mac desktop at work?
Sorry for the long post, but I'm trying to figure out how to come back...

ARD is nothing more than VNC.
1) Yes, but it will be PAINFULLY slow since you'll need to use VNC. ARD uses uncompressed (and with no encryption) VNC, but you can get 3rd party VNC servers and clients (Chicken of the VNC, Vine, etc.).
2) Yes, you will need to use VNC. Again. Painful. Slow. Now, if you wanted to connect from a Mac to an XP Pro box, you could use Remote Desktop Connection (RDP) from Microsoft (http://www.microsoft.com/mac). That is fairly quick.

Has anyone ever used their iPad to remotely connect to a iMac and use programs like Photoshop on their iPad?

Hi everyone,
I had an iMac at home, but I've recently taken on some freelance work and they would like me to come into the office every now and then. I don't want to purchase a laptop and I know you can remotely connect to your desktop with an iPad, but I need to know if anyone has ever done that and successfully used programs like Photoshop on their iPad. Is there lag time when trying to use the software? Or is it just not possible and I should consider getting a laptop again?
Thank you!

iPads are not exact laptop replacements. If you need to be using Photoshop, then buy a normal laptop computer.
Using a remote access app on an IPad or any tablet conputer to remote access your computer to operate will be quite a lot slower and clumsier than just having a laptop with a normal OS and Photoshop application installed.

Remote connection from home PC to work iMac

Our organization recently purchased an iMac 27-inch for an employee. That user would like to be able to remote into the computer from home. Unfortunately, that user has a PC at home. We were able to establish a VPN connection on the home PC and recreate the user's desktop via TightVNC: http://www.tightvnc.com/
We can see the desktop and access mail and files but the connection is way too slow to work effectively. Has anyone tried a different solution for PC to Mac remote connections? Thanks in advance.

Never tried
http://www.coderebel.com/products/irapp

Remote connection with best performance?

I tried vnc and it was awfully slow, now I am trying nx, it is way better than vnc but still I am not really satisfied...do you know anything else that can be faster than nx remote connection right now? Or should I just hope splashtop releases a linux streamer?

I am using Oracle 11g as an Oracle database server. My client have to install[b] "ORACLE CLIENT" before using the product.
How we can use oracle database in the web? It is not possible or feasible to install oracle client in each and every workstation.
Please Help....

Open ports slow down my internet connection. How to close them? What to do?

My MacBook Pro has massive problems with internet connectivity. At times the connection is blazingly fast, at times unbelievably slow.
I've spoken to my internet provider who was able to inform me that my computer opens up 500-700 ports which is probably what's slowing down the network connectivity. When I'm online with the MacBook Pro, the web gets unstable – also for other connected devices like iPad etc.
The web supporter asked me to run an anti-virus scan which I did – with no results. The problem persists. When my MacBook Pro is not online, there are approximately 15 ports open, when I log on the web that number increases to between 500 and 700.
Is this normal?
Can anyone tell me how to solve this issue?
How do I figure out which application opens these ports? (and how to close them?)
I tried logging into another user account on the computer and the problem seemed to disappear, indicating that it is caused by something run only on my user account.
Hope someone can help me..

Open ports don't slow down your computer. The tech support person you spoke to doesn't know what they are talking about.
Basically, when you are using a web browser, opening a page means that the browser needs to open a connection for each element in the page (e.g., it needs to grab each picture, CSS, and JavaScript file that the page requires). This could be a couple of dozen, or it could be hundreds (and there's no telling what Flash content on the page will do). The browser tries to mitigate things a bit using a cache (you might check to make sure the cache is turned on, but this is the default setting). However, this is how all browsers work and how the whole system is designed to operate. You cannot "close" any ports, and they don't linger open, they remain open only as long as data is being transferred. This is expected and appropriate behavior.
The most likely culprit is that you are receiving poor DNS service from your service provider. Every time the computer sees an address like 'http://www.google.com', it needs to send out a request to figure out what numerical address goes with the human-readable name. If the DNS service your system is assigned to use doesn't respond lightning-quick, your experience is going to be very sluggish.
You might want to add an external DNS service to your list of DNS providers. Go to System Preferences > Network, select the network you are using on the left (Ethernet or AirPort), and click the 'Advanced' button. Click on the 'DNS' tab, then press the '+' button under the left panel. I would add the OpenDNS.com DNS servers. Add the following DNS addresses:
{quote}
208.67.222.222
208.67.220.220
{quote}
Click the 'OK' button. And then the 'Apply' button to save the changes.
That will probably fix the problem. If it doesn't the next most likely issue is either network congestion (e.g., your ISP's network is just too busy; a very common thing for small ISPs and cable Internet service), or the remote site that you are trying to contact is simply not performing so well.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (p

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that
the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)(Microsoft SQL Server, Error: 2)
The system cannot find the file specified
Cannot connect to COWBOYS.
Here are the technical details===================================
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=2&LinkId=20476
Error Number: 2
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
The system cannot find the file specified
I have tried from so many forms. This is so frustrating. Thank for everyone/anyone who wants to help. So this is what happened: I had to uninstall my previous sqlserver 2012(which worked great) for some reason, and I uninstalled everything from that download.
Then I installed the trial edition of sql server 2012 (64 Bit) and It wouldn't connect to the database. (Error mentioned above.) My local DB is COWBOYS. (COWBOYS is also my computer name.) After this, I have tried downloading sqlexpress and sqlserver 64bit
many times and cannot connect to my local DB.
How do I connect to my Local DB?
Also, I think this might help: (When I run sqlserve.exe, which I was able to find in C:\Program Files\Microsoft SQL Server\110\LocalDB\Binn, I get an error: Your SQL server installation is either corrupt or has been tampered with(Error getting
instance ID from name). Please uninstall then re-run setup to correct this problem.
I would happily re install it, if it wasn't my 20th time.
I don't have any remote connections, I don't use username/password, only window authentication. I work mostly on visual studio, but without able to store /retrieve data, I don't know how to survive.
May be the solution is very simple, but I am too frustrated.
Some of the things I have tried:
From a command prompt, enter one of the following commands:
net start "SQL Server Agent (MSSQLSERVER)" OR
net start "SQL Server Agent(instancename)"(for instance)
on my sql configuration, I cannot start anything because there is nothing there to start. I can post more details, if that would help. Also, some more details about the error:
Details
Product:
SQL Server
ID:
2
Source:
MSSQLServer
Version:
10.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Version:
9.0
Component:
SQLEngine
Message:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error:
40 - Could not open a connection to SQL Server) (.Net SqlClient Data Provider)
Explanation
SQL Server did not respond to the client request because the server is probably not started.
User Action
Make sure that the server is started.
Any one that can help me, I will be greatful. Thank you so much. p.s. please ask me anything if you have any questions.

It sounds like there are a couple things going on here. First check if you have a successful install of SQL Server, then we'll figure out the connection issues.
Can you launch SQL Server Configuration Manager and check for SQL Server (MSSQLSERVER) if default instance or SQL Server (other name) if you've configured your instance as a named instance. Once you find this, make sure the service is started.
If not started, try to start it and see if it throws an error. If you get an error, post the error message your hitting. If the service starts, you can then launch SSMS and try to connect. If you have a default instance, you can use the machine
name in the connection dialog. Ex: "COWBOYS" where Cowboys is the machine name. However, if you named the SQL Server instance during install, you'll need to connect using the machine\instance format. Ex: COWBOYS\Romo (where Romo
is the instance name you set during install).
You can also look at the summary.txt file in the SQL Server setup error logs to see what happened on the most recent install. Past install history is archived in the log folder if you need to dig those up to help troubleshoot, but the most
recent one may help get to the bottom of it if there is an issue with setup detecting a prior instance that needs to be repaired.
Thanks,
Sam Lester (MSFT)
http://blogs.msdn.com/b/samlester
This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click
"Mark as Answer" and
"Vote as Helpful" on posts that help you. This can be beneficial to other community members reading the thread.

How many users for remote connection can I create, from support SAP

Dear all
I have a doubt with how many users can be created in my system ERP 6.0 for the remote connection, for the error product messages on the marketplace SAP,without this counts as user license.
I have not found any notes or documents from SAP to explain this.
I appreciate your help.
Best Regards,
Erika

Ok...I will reply to myself. I can use more than 10 simultaneous connection, using vnc.

How to Configure Remote Connections To SQL Server 2008 R2 Express

Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!

My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
            // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo

After restoring SharePoint farm backup ( The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connection)

Hi,
I have taken farm back and restore it in new UAT environment, while access to the main site getting the below error:
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 866476f3-23dd-4e1e-97af-bffc62cc2d57
Date and Time: 7/15/2014 11:26:35 AM
When i checked in log i got below error
System.Data.SqlClient.SqlException: A network-related or instance-specific
error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40
- Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject
stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecu...
Thanks in advance
Said Al Balushi

Hi Wendy,
i have checked all below points, every thing is fine but still i am getting the same error.
Check SQL services are runing
Check remote conenctions are enabled
Check SQL Browser service is runing
Check TCP/IP protocal enabled at SQL server
Check out windows firewall setting
Thanks,
Said

Network-related or Instance-specfic error when attempting remote connection from SSMS

Hello,
I have installed SQL Server express on a Win7 desktop and want to connect to it via SSMS on a laptop. I have set up a SQL login on the desktop so I can login, but when I try to connect to the instance from the laptop via SSMS I get the error 26 with saying
there is a network related or instance specific issue and that there is an error locating the Server/Instance specified.
I am trying to connect to a named instance on the SQL Server on the win desktop. Remote connections are enabled and TCP 1433 and UPD 1434 ports are open in Windows Firewall. Antything else I should watch for?
Thanks

Hi MrDAndersen,
According to your description, you come across the errors of pre-login handshake and wait operation timing out. Please help to post the full error log for further analysis.
Based on my research, this issue could occur when .NET Framework 4.5 and non-IFS BSP/LSP are installed on the machine, and non-IFS BSP/LSP interferes with the call to Winsock.
To work around the issue, you could use one of the two methods below.
1. Determine whether a non-IFS BSP or LSP is installed. You could use the "netsh WinSock Show Catalog" command and examine every Winsock Catalog Provider Entry item that is returned. If the 0x20000 bit is clear (not set), it is a non-IFS BSP or
LSP and remove the installed non-IFS Winsock LSPs. For more information about the process, please refer to the article:
http://support.microsoft.com/kb/2568167
2. Download and apply .NET Framework 4.5.2:
http://www.microsoft.com/en-us/download/details.aspx?id=42643
There are two connect items for your reference.
https://connect.microsoft.com/VisualStudio/feedback/details/745004/
https://connect.microsoft.com/VisualStudio/feedback/details/729323
Best regards,
Michelle Li

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.

A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?

1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Ipod classic 160GB very slow sync and cannot connect to itunes store windows 7 ansd itunes 10.6.0.40. I have now been trying for 3 weeks to restore my iPod. Really frustrated, any ideas would be welcome.

Cured the problem! Reinstalled an earlier version of itunes from oldapps.com (version 10) now everything works as it should. I would suggest that if you are experiencing these problems that you do the same. I must say that it is a brave business decision on behalf of apple to effectively lock out all windows 7 users from their products and sales channels and I can only wish them luck in this very shortsighted policy.

Remote Connecting to a PC from my Mac

Hi, I am wondering how I can essentially "screen share" with my friend using a pc. By this I mean they share their screen. I've been looking on the internet for answers and I have found multiple hits for connecting from PC to Mac but not the other way around. In addition, from what I have read, nothing was vert step-by-step. I heard about TightVNC so I told my friend to download it and that I would be able to remote connect to them using what I have in Leopard. However, it's at this point that I am completely clueless on how to actually establish that connection.
I would like to know what the PC user needs to do and secondly what I would need to know/type in in order to connect to their pc and control their screen.
Thanks

When it says "computer:________" Connect. I put in the PC's ip address (I'm pretty sure it's the right one, I will ask again if not).
Do they have a home router between their ISP connection and their PC? If so, their router needs to forward port 3389 from the Internet to their PC. And the IP address you need is the IP address assigned to the router by the ISP. They could access a web site such as <http://whatismyip.com> to find out their public IP address.
1. Who's user name and Password? The PC User's or My account name and my password? If theirs, they don't have a name or password, they turn on the computer and the desktop is there, without having to log in. Do they need to have one (an account or w/e).
The PC's Username and Password. And yes they do have a username and password. They may not remember what they setup, since they have it set to auto login. I do NOT know how to find out this information, as I am a Mac and/or Unix kind of guy
2. Domain. This is optional is it not? Can the IP go in here?
This is the Windows account domain, and nothing to do with IP addresses nor DNS. Mostly they have WORKGROUP or MSHOME as their domain. If it is optional, then ignore it.
Here are some alternative approaches. Sign-up for a free LogMeIn.com account <http://logmein.com>. Have them install the LogMeIn.com server and associate it with the LogMeIn.com account you created. Now you can use your web browser (Safari) to login to the LogMeIn.com account, and from there connect to their PC's LogMeIn.com server.
The current version of Skype allows screen sharing, however, I think it is a view ONLY connection. That is to say, you can watch their screen, but you can not control their keyboard, nor their mouse. <http://skype.com>
Another choice might be a purchased copy of GoToMyPC (there are both Mac and PC versions).
There is also TimBukTu from <http://www.netopia.com> which is also cross platform.
VNC has also been mentioned. Again, VNC needs router port forwarding, only VNC needs port 5900 forwarded. TightVNC, UltraVNC, RealVNC are possible Window's VNC servers. JollysFastVNC (highly recommended), Chicken of the VNC, or Mac OS X built-in Screen Sharing (Finder -> Go -> Connect to Server -> vnc://ip.addr.of.pc). I only recommend the built-in Mac OS X Screen Shring if the other system is on the same high speed network, or if connecting to another Mac OS X system.

ERROR 14614 on Front End when testing with Remote Connectivity Analyzer

Hello forum
Does the Lync Remote Connectivity Analyzer not support 128 encryption?
Reason im asking is the following:
When I test my Lync edge server. I get the following error on the RCA result page: RegisterException.
After this error on the RCA, the event 14614 is logged on my Standard Edition Front end server.
INFO:
User authentication with NTLM protocol failed with error SEC_E_UNSUPPORTED_FUNCTION. This indicates a potential mismatch between security policy settings on the client and server computers.
Cause: This error can occur if the settings in "Network security: Minimum session security for NTLM SSP based (including secure RPC) clients" policy on the client computer are not the same as the settings in the "Network security: Minimum
session security for NTLM SSP based (including secure RPC) servers" policy on this server. By default, the "Require 128-bit encryption" setting is disabled for computers running Windows Server 2008, Windows Vista, Windows Server 2003,
Windows 2000 Server, or Windows XP. For computers running Windows 7 or Windows Server 2008 R2, this setting enabled by default.
Resolution:
Ensure that the "Network security: Minimum session security for NTLM SSP based (including secure RPC) clients" policy settings on the computers from which users log on are the same as "Network security: Minimum session security for NTLM SSP based
(including secure RPC) servers" policy settings on this server.
All of our Lync servers are running on Windows 2012 R2. So why this error from the RCA?

Please check your settings on the client and on the server.
I know, this is a old blog info, but it discribed the problem.
http://blogs.technet.com/b/rogulati/archive/2011/04/30/lync-2010-ntlm-sec-policy-mismatch-error-cannot-sign-from-xp-clients.aspx
http://blog.ucomsgeek.com/2011/01/lync-2010-ntlm-client-authentication.html
regards Holger Technical Specialist UC
Thanks for the answer, but in this case the "Client" is the Remote Connectivity Analyzer. So my question was, why is it not working with that? Does the RCA not support 128 bit?

Slow logout on remote connection.

Similar Messages

Maybe you are looking for