Slow Mac since updated to Yosemite. Help

Since I have upgraded to Yosemite computer is slow, freezes . What can I do to correct this?

When you have the problem, note the exact time: hour, minute, second.  
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Slow Macbook after updating to Yosemite 10.10.3

    Please see the below report from EtreCheck in regards to this.
    Thanks.
    Problem description:
    Macbook Pro has been running very slowly since updating to Yosemite 10.10.3 (I think thats it) to the point where it has been basically unusable.
    There seems to be spikes as to when the Macbook runs most slowly.
    Have re-installed OS X a number of times and even restored the Macbook to a point before updating Yosemite to 10.10.3 via TimeMachine.
    Other things i have done include:
    - Reducing the number of things Spotlight searches for - I have a notification thats says ‘Optimising Your Mac - Performance and Battery life will be affected until completed’ which has been there for over a week now. I had read on some forums this was to do with Spotlight re-indexing, however when checking to find a progress bar there does not appear to be one which suggest Spotlight re-indexing is not the issue.
    - Removing unecessary widgets, mail and calendar accounts (Issues with Calendar Agent were showing up in Console)
    - Ran EtreCheck and removed a number of .plist files that seemed be an issue. It appears from this report that one still remins for CleanMyMac2 (which I know causes issues). Tried to delete this file but it won't allow me.
    There a few others but I’ve been trying so many things Ive lost track.
    If someone could help it would be much appreciated.
    EtreCheck version: 2.2 (132)
    Report generated 4/23/15, 11:13 AM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Late 2011) (Verified)
        MacBook Pro - model: MacBookPro8,1
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery: Health = Normal - Cycle count = 514 - SN = 9G152003GD3MA
    Video Information: ℹ️
        Intel HD Graphics 3000
            Color LCD 1280 x 800
            S24B150 1920 x 1080 @ 60 Hz
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 2:52:26
    Disk Information: ℹ️
        TOSHIBA MK5065GSXF disk1 : (500.11 GB)
            EFI (disk1s1) <not mounted> : 210 MB
            Macintosh HD (disk1s2) / : 249.00 GB (157.38 GB free)
            Recovery HD (disk1s3) <not mounted>  [Recovery]: 650 MB
            BOOTCAMP (disk1s4) /Volumes/BOOTCAMP : 250.25 GB (209.45 GB free)
        OPTIARC DVD RW AD-5970H 
    USB Information: ℹ️
        Apple Inc. FaceTime HD Camera (Built-in)
        Western Digital My Passport 0748 2 TB
            EFI (disk0s1) <not mounted> : 210 MB
            Boot OS X (disk0s3) <not mounted> : 134 MB
            SW CAPRICORN (disk2) /Volumes/SW CAPRICORN : 2.00 TB (1.34 TB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 2.00 TB Online
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple, Inc. Keyboard Hub
            Apple Inc. Apple Keyboard
        Canon MX300 series
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.seagate.driver.PowSecDriverCore (5.1.1) [Click for support]
            /System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Click for support]
        [not loaded]    com.seagate.driver.SeagateDriveIcons (5.1.1) [Click for support]
    Startup Items: ℹ️
        HWNetMgr: Path: /Library/StartupItems/HWNetMgr
        HWPortDetect: Path: /Library/StartupItems/HWPortDetect
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.macpaw.CleanMyMac2.Agent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [failed]    com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support] [Click for details]
        [failed]    com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support] [Click for details]
        [failed]    com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support] [Click for details]
        [loaded]    com.zimbra.desktop.plist [Click for support]
    User Login Items: ℹ️
        RescueTime    Application  (/Applications/RescueTime.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        Silverlight: Version: 4.1.10329.0 [Click for support]
        MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Mobile backups: ON
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 249.00 GB Disk used: 91.62 GB
        Destinations:
            My Passport for Mac [Local]
            Total size: 2.00 TB
            Total number of backups: 58
            Oldest backup: 2013-10-16 08:20:22 +0000
            Last backup: 2015-04-22 05:11:39 +0000
            Size of backup disk: Excellent
                Backup size 2.00 TB > (Disk size 249.00 GB X 3)
    Top Processes by CPU: ℹ️
             9%    WindowServer
             5%    com.apple.WebKit.WebContent(4)
             3%    Safari
             1%    fontd
             1%    mdworker(13)
    Top Processes by Memory: ℹ️
        515 MB    kernel_task
        410 MB    com.apple.WebKit.WebContent(4)
        156 MB    mdworker(13)
        90 MB    CalendarAgent
        86 MB    backupd
    Virtual Memory Information: ℹ️
        49 MB    Free RAM
        3.95 GB    Used RAM
        28 MB    Swap Used
    Diagnostics Information: ℹ️
        Apr 23, 2015, 08:19:33 AM    Self test - passed
        Apr 22, 2015, 08:58:02 AM    /Users/rd1/Library/Logs/DiagnosticReports/SyncServicesAgent_2015-04-22-085802_[ redacted].crash
        Apr 23, 2015, 08:35:33 AM    /Users/rd1/Library/Logs/DiagnosticReports/RescueTime_2015-04-23-083533_[redacte d].crash

    I see you have used Clean My Mac. If you search these forums you will find that running apps like this can cause problems. Start with this link:
    Re: Re: 3 GBs used, no apps running.
    Startup Items: ℹ️
        HWNetMgr: Path: /Library/StartupItems/HWNetMgr
        HWPortDetect: Path: /Library/StartupItems/HWPortDetect
        Startup items are obsolete in OS X Yosemite
    Go to your main Library folder > Startup Items and remove the items in red.
    Macintosh HD Root folders
      Applications
      Library > Startup Items
      System
      Users

  • Issues since update to yosemite

    Hello everyone,
    I've been having all sorts of issues since updating to yosemite which I am struggling to fix on my macbook.
    I've had the mac since 2010/11 and the first thing I noticed after updating to Yosemite was the fan constantly running from the moment I boot the machine and that the icons on my desktop were extremely slow to load up as are any files in the documents folder and finder.
    Then watching videos on youtube etc were refusing to play fully. I have since updated to the latest flash player but it is still slow.
    I ran the activity monitor and a kernel task file is operating at around 120% all the time.
    I have read numerous posts on the internet to try to fix and have upgraded to the latest yosemite, reset the printers and many other things.
    Now the trackpad is no longer working and not recognised and now the final straw for me is the keyboard refusing to be recognised at startup. I am currently using a wired mouse and bluetooth keyboard to get around these problems and everything is working fine with these but is a real pain.
    Has anyone had any similar problems to the above and know how to sort as this is taking up way too much of my time.
    Thanks

    What is the exact, complete text of the error message you get?

  • Since updating to Yosemite my audio is not working?

    Hey,
    Every since updating to Yosemite on my MacBook Pro (Early 2011 model) my audio/sound has been very intermittent.  It stops working after my computer goes to sleep and needs a hard restart to get it back.
    A few times I was able to kill the process in activity monitor or use a terminal command and it would reset the coreaudio and work but that stopped working for me now too.. Coreaudio shows in activity monitor as not responding even after it comes back after a force quit or regular quit.
    Has anyone been able to identify and solve this issue?
    Thanks

    Repair permissions & restart.
    Check your settings in the Audio Midi app which is located in the Utilities folder.
    http://support.apple.com/kb/TS1574 Troubleshooting issues with no audio from built-in speakers on Macs
    Trick/Tip:Open up GarageBand if installed then, open a program (optional).
    Quit out of the GarageBand app.
    =====================
    Repairing the mysteriously muted Mac
    The background on the issue is that there’s a small sensor switch inside the headphone port. When you insert a headphone jack, the sensor understands what's what and changes the sound output setting to Headphones. If you insert a jack for digital audio output, the device changes to Digital Out. When you remove the jack completely, it should read Internal Speakers.
    The spirits tell me that there’s a very good chance that you recently had something jacked into this port—a set of headphones or a cable leading to powered speakers, for example. When you removed the jack, something in the port prevented the sensor from tripping correctly. That’s why you see Digital Out instead of internal Speakers.
    The solution is to force the sensor to do its job. The safest way to do that is to simply run a jack in and out of the port a few times. Much of the time, this takes care of the problem by correctly tripping the sensor. If that doesn’t work, there may be gunk in the port. Before turning to more invasive techniques, get a can of compressed air, attach the small tube that fits the nozzle, and blast a few shots of air into the port. With any luck, that should dislodge the gunk and the port will operate as it should.
    If that doesn’t work, find a foam-tipped swab that fits (electronics shops generally carry them), dip it in rubbing alcohol, and gently insert it into the headphone port in an attempt to wipe away any stubborn gunk. I recommend foam rather than cotton swabs because the cotton variety might leave threads behind. (This same technique works well with misbehaving headphone ports on devices such as iOS devices.)
    It's possible that gunk has nothing to do with it. Rather, it may be that the switch just needs a subtle nudge. If a jack or swab doesn't work, I've heard of people successfully resetting it with a deft poke of a toothpick.
    http://www.macworld.com/article/2031146/repairing-the-mysteriously-muted-mac.htm l

  • My NTFS formatted external Toshiba drive is unreadable since update to Yosemite OS X 10.10.1

    My portable external Toshiba hard drive is now unreadable on my MacBook Pro early 2008 aluminum computer. Since updating to Yosemite OS X 10.10.1, I cannot recover my files stored as Time Machine backups on my external drive. In the finder, it cannot be see under devices, however in Disk Utility, it is visible. The mounted partition is not viewable, however. My own native hard drive is 200 GB while the external hd is 500 GB. There's no creating a 500 GB image on my hard drive, in other words. I've tried the latest versions of Paragon NTFS and Tuxera NTFS with no avail.
    How am I to recover my files, most importantly my Time Machine backups, from my external drive?

    The first thing I realised when I started using a Mac was that it does not read NFTS files straight from the box. I had a Toshiba external drive as well and I had to copy all the files using a windows computer. Installed Tuxera on  my Mac, partitioned the Toshiba drive into 2 sections one NFTS and the other Journaled.
    When you copy files, do not modify the files as this may render them useless on your Mac.
    I use the Journaled partition for Time Machine and the NFTS on both Mac and Windows file storage.
    Do not format the Toshiba external drive otherwise you will lose all your data. Install a paid version of Tuxera on your Mac to be able to read the data. Some Toshiba hard drives come with a complete version of Tuxera.

  • Since updating to Yosemite Apple remote doesn't work

    Hello all,
    I have a bit of a problem, since updating to Yosemite my Apple remote stopped working on my iMac (27-inch, Mid 2011). It worked before the update without a hitch, but now I can't pair it to the computer.
    It is a 7 button remote in question, tried pairing it as before using the right arrow + menu but nothing happens. I have also tried with a new battery so this not the issue. 
    I guessed it needed to be "re-paired" to it again so I have followed the instructions System Preferences / Security & Privacy / General / Advanced  but I don't have the “Disable remote control infrared receiver.” option to be found...
    I tried googling the solution but with no luck so I rely on your advice, please
    Here is also a print screen of my Security & Privacy window...
    It is not a major issue but it is a bit of an inconvenience....
    Thnx!

    Here's mine, the lower one

  • Since updating to Yosemite and CS6 2 of my print options are greyed out on my epson R2880 print pane?

    My colour and colour settings options are 'greyed out' on my  Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??

    That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
    Can you show screen shot(s) of your incomplete print dialog?

  • Unable to send or create a link to send pdf file since update to Yosemite.

    Unable to send or create a link to send pdf file since update to Yosemite.

    Hi Donald S Matheson,
    Are you still facing this issue?
    May i know which application or service you are using. Can be more precise and provide me the steps to check the behavior at my end.
    Regards,
    Ajlan Huda.

  • Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device "Kitchen". The host cannot be reached."  Has anyone else had this?

    Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached."  Has anyone else had this problem

    I'm having the same issue.  Haven't found a workaround.  I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV.  For whatever reason, the two AirportExpress that I have in a different rooms cut out.  I only have 600 square foot apartment so it's not that big, the signal should be strong enough.  Airport Utilitiy reports the signal strength to be strong on all devices.
    I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software.  Very frustrating.  My Airplay used to work very nice and now I'm constantly having issues and restarting my network.  I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
    The only workaround I found so far is to unplug the devices and to plug them back in.  Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week.  Very annoying.

  • Canon RAW not woking since updating to yosemite

    Since updating to Yosemite which also installed iPhoto 9.6 my Canon RAW files are not opening. Jpeg works just fine but the RAW show either all black or just a portion of the image shows. Any ideas?

    What Canon model camera do you have?
    As a workaround one user found that if they uploaded the files to a folder on the Desktop via a card reader and imported from there the RAW files would import successfully.

  • My canon p-150m scanner gives the error message "cannot load drivers" ever since updating to yosemite

    why does my canon p-150m scanner gives the error message "cannot load drivers" ever since updating to Yosemite ? I have had 2 reload the driver 2x - but each new time I start I keep getting the same error message .

    Try resetting the printing system.
    OS X Mavericks: Reset the printing system

  • Mail not connecting regularly since updating to Yosemite

    Ever since updating to Yosemite my mail program has had a really hard time staying connected to my email accounts.  Both my gmail and my icloud accounts are affected.  The settings have not changed, and this worked fine on all previous iterations of OSX.
    Could not connect to iMap Server
    connection to server "imap....."on port 993 timed out.
    I've tried deselcting Use SSL, but it doesn't seem to fix the problem.  It just times out on port 143.
    The only caveat to this is if I quit mail and re-launch, the program connects, but only for a little while.

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Cannot change signatures in mail since updated to yosemite

    Since updated to yosemite I cannot change the signatures in Mail.

    Go to Finder>Preferences>General>Show devices on desktop

  • I can't place images from Photos into InDesign since updating to Yosemite 10.10.3. Is this an Apple issue or an Adobe one?

    I can't place images from Photos into InDesign since updating to Yosemite 10.10.3. Is this an Apple issue or an Adobe one? It used to be a simple process with iPhoto but not anymore.

    Thanks Steve. I should have mentioned that I’m still using CS6. Wonder if that’s the difference? All I get in the sidebar is Photo Booth which is useless.
    vann jennings
    creative director
    [email protected]
    chemistry
    3918 River Rd.
    North Topsail Beach NC 28460
    cell: 412-298-8275
    Henry W. Oliver Building
    535  Smithfield St.
    Suite 230
    Pittsburgh PA  15222
    phone: 412.642.0642
    www.visitthelab.com

  • TS3716 iPod classic does not appear in iTunes for Mac since updating to 11.0.

    iPod classic does not appear in iTunes for Mac since updating to 11.0. It appears on the desktop and iTunes starts up when the iPod is connected, but it does not appear in a form so that I can manage its contents.

    Mike:
    Just had the very same problem.  iPod Classic shows up on my desktop but not in iTunes (11.0.1).  I tried restarting iPod while connected as suggested elsewhere.  Didn't work.  What did seem to work however was, while the iPod is connected (and on the desktop) restart iTunes.  Once it restarted it was there and synching.  I also, before restart, made sure that auto-synching was set up in iTunes preferences (under devices).
    Try this.  May work for you as well.

Maybe you are looking for

  • Problem in Assigning the Business System

    Hi,    I have problem in Assigning the Business System at Configuration when I am trying to configure the Communication Channel. I had created two Software Components and also Two Technical Systems (Third Party) and Business System and I imported the

  • Vendor payment advice through email

    Hi gurus i want to send vendor payment advice through email , i am using the form F110_IN_AVIS  for payment advice and from the report  RFFOAT_P i want to send the email , is any configuration needed to send the email , or just i have to give selecti

  • Scheduled status of the job?

    Hi experts, I have a job RSUVM007 which has status as "Scheduled"?. There are around 8 jobs of with similar job name. May i know what does scheduled means? And what happens if i delete using job tab->delete option.? thanks in advance, Dubbu

  • Edit in photoshop! My images aren't coming back to LR.

    I am using LR 5.7 and CS6. When I use the "edit in photoshop" feature I am getting stuck because my images are not coming back to LR. They are being sent, as TIF's, to original folder where all the RAW files are. I have to go search for it and reimpo

  • Mute switch won't function since ios 7 upgrade

    I am using iPad 4 wi-fi only (not 4G) version. Since upgrading to ios 7 the mute switch no longer works. When activated a message says "ringer off". I assume that is a function for iPhone. Has anyone had the same problem and knows a fix?