Slow Macbook Pro 2011

Since couple of months i'm experiencing a very slow system.
5 seconds to open up Finder.  10 seconds to open a picture...  etc...
here's a couple of lines from the console log  ( upon opening the console i also experienced a spinning beachball)
1/03/15 20:24:57,487 locationd[492]: Couldn't find a requirement string for masquerading client /System/Library/PrivateFrameworks/Parsec.framework
1/03/15 20:24:57,490 locationd[492]: could not get apple languages array, assuming english
1/03/15 20:24:57,881 locationd[492]: Location icon should now be in state 'Active'
1/03/15 20:25:00,839 locationd[492]: Location icon should now be in state 'Inactive'
1/03/15 20:25:02,632 locationd[492]: Location icon should now be in state 'Active'
1/03/15 20:25:02,875 Console[11924]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
1/03/15 20:25:04,661 locationd[492]: Location icon should now be in state 'Inactive'
1/03/15 20:25:07,374 sandboxd[10537]: ([11923]) com.apple.metada(11923) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
1/03/15 20:25:07,784 sandboxd[10537]: ([11923]) com.apple.metada(11923) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
1/03/15 20:25:07,935 sandboxd[10537]: ([11923]) com.apple.metada(11923) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
1/03/15 20:25:08,137 sandboxd[10537]: ([11923]) com.apple.metada(11923) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
1/03/15 20:25:08,288 sandboxd[10537]: ([11923]) com.apple.metada(11923) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
1/03/15 20:25:08,491 sandboxd[10537]: ([11923]) com.apple.metada(11923) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
1/03/15 20:25:09,009 sandboxd[10537]: ([11923]) com.apple.metada(11923) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
1/03/15 20:25:11,058 WindowServer[115]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
1/03/15 20:25:11,614 WindowServer[115]: common_reenable_update: UI updates were finally reenabled by application "Console" after 1.56 seconds (server forcibly re-enabled them after 1.00 seconds)
1/03/15 20:25:11,058 WindowServer[115]: disable_update_timeout: UI updates were forcibly disabled by application "Console" for over 1.00 seconds. Server has re-enabled them.
1/03/15 20:25:11,614 WindowServer[115]: common_reenable_update: UI updates were finally reenabled by application "Console" after 1.56 seconds (server forcibly re-enabled them after 1.00 seconds)
1/03/15 20:25:13,315 sandboxd[10537]: ([9091]) storeuid(9091) deny mach-lookup com.apple.dock.server
Here's an Etrecheck
EtreCheck version: 2.1.8 (121)
Report generated 1 maart 2015 20:17:54 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless:  en1: 802.11 a/b/g/n
    Battery Health: Check Battery - Cycle count 777
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 384 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10 (14A389) - Time since boot: 21 days 0:0:18
Disk Information: ℹ️
    ST9320325ASG disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        Macintosh HD (disk1) / : 316.95 GB (107.11 GB free)
            Core Storage: disk0s2 319.08 GB Online
    MATSHITADVD-R   UJ-898 
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    JMicron USB to ATA/ATAPI Bridge 500,11 GB
        Untitled (disk2s1) /Volumes/Untitled : 500.11 GB (441.26 GB free)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    7 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.awdd.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.GSSCred.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.periodic-monthly.plist
    [killed]    com.apple.wdhelper.plist
    7 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
User Launch Agents: ℹ️
    [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Programma  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    UNKNOWN  (missing value)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 [Click for support]
    Flash Player: Version: 15.0.0.189 - SDK 10.6 Outdated! Update
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
Safari Extensions: ℹ️
    Open in Internet Explorer
3rd Party Preference Panes: ℹ️
    Flash Player  [Click for support]
    Tuxera NTFS  [Click for support]
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        Macintosh HD: Disk size: 316.95 GB Disk used: 209.85 GB
    Destinations:
        My Passport [Local]
        Total size: 0 B
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Too small
            Backup size 0 B < (Disk used 209.85 GB X 3)
Top Processes by CPU: ℹ️
         7%    WindowServer
         7%    mds
         1%    Google Chrome
         1%    launchd
         0%    SABnzbd
Top Processes by Memory: ℹ️
    176 MB    Google Chrome
    133 MB    softwareupdated
    104 MB    Google Chrome Helper
    82 MB    Finder
    56 MB    WindowServer
Virtual Memory Information: ℹ️
    42 MB    Free RAM
    961 MB    Active RAM
    928 MB    Inactive RAM
    1.19 GB    Wired RAM
    98.19 GB    Page-ins
    1.11 GB    Page-outs
Would be very happy if i see the problem fixed
Thanks in advance!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1269 ' 0.5 0.25 10 1000 15 5120 1000 25000 1 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1 350 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/{print};END{if(NR<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1<9 { o[$1]=o[$1]"\n    "$3" (UID "$4"): "$2;} $1==9&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==10&&$5 { p="ps -c -ocomm -p"$5"|sed 1d";p|getline n;close(p);if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[12]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<13;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+\)$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2 \1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^  |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') nextfile;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"9\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"10\f%@d\f%s\f%d\f%d\n\",@d);printa(\"11\f%@d\f%s\f%d\f%d\n\",@e);printa(\"12\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'G -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |fmfd|Goog|ksho|ndum|obso|realp|rned f|sandbox ex|/root" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,user/$UID} -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {Daemons,Agents}\ {load,disabl}ed {Admin,Root}\ access Stylesheet Library\ paths{,' ('{shell,launchd}\)} Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 27;B1&&! B2&&C2 28;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 31 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 32;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 81;B3 18;A1 33 60 82;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 83 114;j=$?;for i in 0 1;do ((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74;B7 11;B4 0 0 11;C3 23+2*i;D4 24+2*i 14 66+i 92+i;done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 29 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 84 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B3 15;B6 14 15 4;C3 67;A1 24 75 74;B3 23;A2 39 57 30;B3 24;B6 23 24 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 30;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I may not agree with them.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Similar Messages

  • "Error Disk too Slow" Macbook Pro 2011 - Maverick and Yosemite - The Great Grand Mystery Unfolds!!!

    Hey everybody,
    Logic Pro X user here, have a late 2011 Macbook Pro, upgraded to 16gb of ram, 2.8ghz intel core i7, running latest version of Mavericks and more recently on a separate partition I tried Yosemite with a  clean install of only Logic Pro X.
    I use Apogee Quartet as my audio interface, I have a OWC Mercury Elite Firewire 800 external drive that I record to, all LPX files are on my internal drive.
    Before Mavericks I had 0 issues with this setup, no with just one sole drummer track, or one single audio or software track, I get the various disk too slow errors after a few seconds.
    I have tried reinstalling LPX, I tried a clean partition with nothing but Logic Pro on it (both Mavericks and Yosemite).
    I have reset my PRAM and used Apple Hardware diagnostics as well as memtest (i think it was called) and even reverted back to my old original RAM that came with the computer.  All hardware tests passed, I have verified and repaired disks from disk utility as well as from the recovery partition.
    I have worked with Apple a bit over the phone doing these things, I have also read just about every thread on this pervasive issue.  And its ruining my experience as a user.  I absolutely loved Logic on Mountain Lion, no issues whatsoever! I'm considering reverting back to it actually.
    On a side note I also have a HDMI Tv connected through the thunderbolt display, and a self powered USB hub that I connect my wireless mouse, iPhone cable and WD MY passport drive (which I only use for Time Machine).
    I'm basically at my wits end and open to anybodies suggestions, I even tried resting the SMC and several other things advised in these forums.
    I'm Stil under Apple Care and wondering if going into them is my only hope left.
    I find that garageband acts the same, but I have no other system issues! its so bizarre, performance on all other programs is totally fine, its only when I want to record that I get issues.
    For the record I do have some 3rd party VTS (Arturia V collection, EZ drummer 2 and AMplitube) but when I did the clean partition they weren't there and I still had the disk to slow error, so I'm not convinced its because of those.
    Also Since the partition I obviously have played with my storage but I still have 75 gas of space on the mavericks partition (out of 500gb ) and on Yosemite partition I have 125 gbs available and on my Firewire external drive I have about 150gb left on a 500gb drive, so I'm not convinced its a space issue either (especially since before Mavericks Mountain Lion seemed to work just fine.)
    HELP! Please help...I'm so exhausted trying to fix this on my own, and admittedly I've run to the end of my own capacity and don't know where to go from here.
    Thank you for any suggestions, sorry for the long post, and if I have left anything out please let me know, this is my first post.

    And yes I did upgrade my apogee drivers to the recent ones they just released.

  • My macbook pro is running slowly. How do I speed it up?  Problem description: Slow macbook pro  EtreCheck version: 2.1.2 (105) Report generated December 12, 2014 at 9:28:15 AM EST  Hardware Information: ️      MacBook Pro (13-inch, Late 2011) (Verified)

    Problem description:
    Slow macbook pro
    EtreCheck version: 2.1.2 (105)
    Report generated December 12, 2014 at 9:28:15 AM EST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10.1 (14B25) - Uptime: 5 days 1:56:44
    Disk Information: ℹ️
      TOSHIBA MK5065GSXF disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.Logitech.Control Center.HID Driver (2.6.0) [Support]
      [not loaded] com.palm.ClassicNotSeizeDriver (3.2.1) [Support]
      [not loaded] com.wacom.kext.pentablet (5.0.5) [Support]
    Startup Items: ℹ️
      HP IO: Path: /Library/StartupItems/HP IO
      Parallels: Path: /Library/StartupItems/Parallels
      Startup items are obsolete in OS X Yosemite
    Problem System Launch Agents: ℹ️
      [failed] com.apple.AirPlayUIAgent.plist [Details]
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cmfsyncagent.plist [Details]
      [failed] com.apple.coreservices.appleid.authentication.plist [Details]
      [failed] com.apple.EscrowSecurityAlert.plist [Details]
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.lookupd.plist
      [failed] com.apple.sbd.plist [Details]
      [failed] com.apple.security.cloudkeychainproxy.plist
      [failed] com.apple.spindump_agent.plist [Details]
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AssetCacheLocatorService.plist [Details]
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.GSSCred.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-daily.plist [Details]
      [failed] com.apple.periodic-weekly.plist [Details]
      [failed] com.apple.softwareupdate_download_service.plist [Details]
      [failed] com.apple.spindump.plist [Details]
      [failed] com.apple.tccd.system.plist [Details]
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist [Details]
      [failed] org.cups.cupsd.plist [Details]
    Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist [Support]
      [loaded] com.hp.help.tocgenerator.plist [Support]
      [running] com.wacom.pentablet.plist [Support]
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist [Support]
      [running] com.fitbit.galileod.plist [Support]
      [loaded] com.google.keystone.daemon.plist [Support]
      [loaded] com.microsoft.office.licensing.helper.plist [Support]
    User Launch Agents: ℹ️
      [running] com.spotify.webhelper.plist [Support]
    User Login Items: ℹ️
      iTunesHelper UNKNOWN (missing value)
      Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
      Adobe Update Manager UNKNOWN (missing value)
      Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
      SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
      Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
      Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
      apple-scc-20141117-121931 UNKNOWN (missing value)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
      HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    Internet Plug-ins: ℹ️
      Flip4Mac WMV Plugin: Version: 2.1.0.33 [Support]
      FlashPlayer-10.6: Version: 15.0.0.246 - SDK 10.6 [Support]
      Default Browser: Version: 600 - SDK 10.10
      Flash Player: Version: 15.0.0.246 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
      AdobePDFViewer: Version: 8.1.0 [Support]
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.1.0 [Support]
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
      iPhotoPhotocast: Version: 7.0 - SDK 10.7
    User internet Plug-ins: ℹ️
      Unity Player: Version: UnityPlayer version 1.6.2 [Support]
    3rd Party Preference Panes: ℹ️
      Flash Player  [Support]
      Flip4Mac WMV  [Support]
      Logitech Control Center  [Support]
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 448.07 GB
      Destinations:
      Data [Network]
      Total size: 2.00 TB
      Total number of backups: 59
      Oldest backup: 2014-03-12 12:51:24 +0000
      Last backup: 2014-12-05 16:47:01 +0000
      Size of backup disk: Excellent
      Backup size 2.00 TB > (Disk size 498.88 GB X 3)
    Top Processes by CPU: ℹ️
          3% hidd
          0% Fitbit Connect Menubar Helper
          0% WindowServer
          0% fontd
          0% syslogd
    Top Processes by Memory: ℹ️
      206 MB iPhoto
      172 MB Mail
      64 MB Safari
      60 MB mds
      52 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      49 MB Free RAM
      832 MB Active RAM
      796 MB Inactive RAM
      1.41 GB Wired RAM
      45.93 GB Page-ins
      1.06 GB Page-outs
    Diagnostics Information: ℹ️

      Macintosh HD (disk1) / : 498.88 GB (50.81 GB free)
    You have only about 10 percent free drive space left. 50gB is enough to run the computer but, if it gets much smaller, that can slow how Virtual Memory (VM) works as the system has to more carefully search the remaining space for qualified blocks to which to write data.
    Adding RAM will reduce the writes-to-disk by VM but you should probably consider a little holiday disk cleaning of stuff you no longer use.
    This concerns me:
    User Login Items: ℹ️
      iTunesHelper UNKNOWN (missing value)
      Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
      Adobe Update Manager UNKNOWN (missing value)
      Microsoft Excel Application (/Applications/Microsoft Office 2004/Microsoft Excel)
      SpeechSynthesisServer Application (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
      Inspiration 8 Application (/Applications/Inspiration 8/Inspiration 8.app)
      Fitbit Connect Menubar Helper Application (/Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Menubar Helper.app)
      apple-scc-20141117-121931 UNKNOWN (missing value)
      HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
      HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
    That is a LOT of log-in items for a compute with 4GB RAM. Some are hard to avoid but Excel is a big program that can be easily launched from the Dock. I don't know what "Inspiration 8" is but likely the same advice will apply.

  • My Macbook pro 2011 suddenly has a really slow bootup. What can I do?

    My Macbook pro 2011 suddenly has a really slow bootup. What can I do? I did install a cannon printer upgrade and security upgrade. Not sure if it was something to do with that. Also I tried the disk utility repair and didn't improve anything. I also reset PRAM and SMC.

    1. Try booting in e Verbose mode - press and hold [cmd] + [v] keys just right after the boot chord sounds till you get a black screen and white letters.
    if there are some delays in the boot process  -  you should see where the system is stuck.
    this mode is not permanent - the next [re-] boot will be normal.
    2. repair permissions. disk utility does fine. Disk Warrior is better.
    sometimes after half done updates (it may happen though should not) there are items that are "belonging to someone else"
    3. try  cache cleaner (or there are some other utilities as well - I just like SlCC  more)  http://www.northernsoftworks.com/snowleopardcachecleaner.html - it's shareware though the basic functionality is free for you to use.
    Try caches -> deep cleaning (please read the developers site what it does) and select checkmark at all options - reply yes to the requests and after a reboot the next reboot should be as it is intended.
    p.s be sure you do have backup  

  • Why is my addressbook incredibly slow? No smartgroups installed... MACOS10.7.5 on MacBook Pro 2011, 200 GB free on HD, 4GB Ram, 1 GB available ...

    Why is my addressbook incredibly slow? No smartgroups installed... MACOS10.7.5 on MacBook Pro 2011, 200 GB free on HD, 4GB Ram, 1 GB available ...

    Why is my addressbook incredibly slow? No smartgroups installed... MACOS10.7.5 on MacBook Pro 2011, 200 GB free on HD, 4GB Ram, 1 GB available ...

  • Help: Slow Crucial C300 256GB SSD in 17" MacBook Pro (2011) via SATA III 6Gb/s

    Computer: 2011 17" MacBook Pro
    Drive: Crucial C300 256GB
    Drive Firmware: Revision 7
    Bay: Main Drive Bay (6Gb/s)
    OS: Lion 10.7.1
    I did a fresh install of 10.7.1 and I'm getting these speeds on the above configuration:
    Here is the same test run on my previous computer, a 2008 Mac Pro, with SATA II (same exact drive):
    What is going on here?  The Mac Pro with SATA II was running the C300 faster than the brand new 17" MacBook Pro 2011 running SATA III.  This drive should be getting up up to 355MB/s read on SATA III.
    Can someone please help me figure out why this drive is not running faster in my computer?
    Thank you in advance.
    FYI - I did install the new EFI 2.2 Update that was released in September.  The above tests were after I installed the update!  So you can rule out that I didn't install this update that supposedly fixed SATA speed issues on these Mac's.

    I solved it.  Xbench didn't give the best results.  I tried other benchmarking tools and concluded that I am getting the SATA III speeds on this drive on this MacBook Pro.

  • Macbook Pro 2011 running very slowly after upgrading to Mavericks

    I am in deep trouble with my wife so any help would be gratefully accepted.
    Shortly after Mavericks became available I upgraded my wife's Macbook Pro 2011 to use the new OS version. Ever since then, the Macbook has been running noticeably slowly. In particular, Mail is almost unusuable taking minutes to open and showing long delays while moving around messages, folders, etc. Excel and Word are also much slower, Safari is slow, in fact just about everything is grinding.
    Any ideas on what can I can do to improve things and apease my unhappy wife would be much appreciated.
    I have attached the Etrecheck output FYI
    Thanks
    Andrew
    Hardware Information:
              MacBook Pro (13-inch, Late 2011)
              MacBook Pro - model: MacBookPro8,1
              1 2.4 GHz Intel Core i5 CPU: 2 cores
              4 GB RAM
    Video Information:
              Intel HD Graphics 3000 - VRAM: 384 MB
    System Software:
              OS X 10.9.1 (13B42) - Uptime: 0 days 0:5:25
    Disk Information:
              Hitachi HTS545050B9A302 disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (361.28 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              MATSHITADVD-R   UJ-8A8 
    USB Information:
              Apple Computer, Inc. IR Receiver
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. BRCM2070 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple Inc. Apple Internal Keyboard / Trackpad
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist 3rd-Party support link
    Launch Agents:
    User Launch Agents:
              [loaded] com.google.keystone.agent.plist 3rd-Party support link
    User Login Items:
              Dropbox
    Internet Plug-ins:
              LogMeInSafari64: Version: 1.0.730 3rd-Party support link
              Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
              Default Browser: Version: 537 - SDK 10.9
              OfficeLiveBrowserPlugin: Version: 12.3.6 3rd-Party support link
              Silverlight: Version: 4.0.50401.0 3rd-Party support link
              FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6 3rd-Party support link
              LogMeIn: Version: 1.0.730 3rd-Party support link
              Flash Player: Version: 11.9.900.170 - SDK 10.6 Outdated! Update
              QuickTime Plugin: Version: 7.7.3
              LogMeInSafari32: Version: 1.0.730 3rd-Party support link
              iPhotoPhotocast: Version: 7.0
              JavaAppletPlugin: Version: 14.8.0 - SDK 10.9 Outdated! Update
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
              AirPlay: Version: 1.9 - SDK 10.9
              AppleAVBAudio: Version: 2.0.0 - SDK 10.9
              iSightAudio: Version: 7.7.3 - SDK 10.9
    3rd Party Preference Panes:
              Flash Player  3rd-Party support link
    Bad Fonts:
              None
    Old Applications:
              /Library/Application Support/Microsoft/MERP2.0
                        Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4 3rd-Party support link
                        Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4 3rd-Party support link
              SuperDuper!:          Version: 2.7.1 - SDK 10.4 3rd-Party support link
              Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4 3rd-Party support link
                        /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
    Time Machine:
              Time Machine not configured!
    Top Processes by CPU:
                   7%          Safari
                   6%          Dropbox
                   5%          WindowServer
                   3%          hidd
                   2%          com.apple.WebKit.Networking
    Top Processes by Memory:
              119 MB          com.apple.IconServicesAgent
              106 MB          Safari
              94 MB          Finder
              94 MB          Dropbox
              94 MB          Mail
    Virtual Memory Information:
              1.26 GB          Free RAM
              1.44 GB          Active RAM
              311 MB          Inactive RAM
              1014 MB          Wired RAM
              251 MB          Page-ins
              0 B          Page-outs

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • MacBook Pro 2011-11 is hot !

    If I put an external monitor (actually, it’s a full HD external monitor), the AMD Radeon HD 6750 takes the job and even if there is no application that runs (excepted the Finder, of course, or AppleScript Editor only [used to quit the Finder]), after two or three minutes, I start to get my MacBook Pro 2011-11 hot (top-left).
    I even put wood between the table (desk) and the MacBook pro feet, then added stoppers of plastic bottle: the hot start to be hotter.
    Then, the Finder start to responding slow, slowly, very slow…
    This can also happens on winter (the temperature of the room act on the hot, but only if it is 25 / 30 ° celcius.
    The temperature tops around 80° celcius, but the overall slow of the computer make its use… nearly impossible. MICE under VirtualBox takes … nearly minutes to reassemble a two pages screen shot (2 images of 1440 pixels wide).
    I recall that when I had my previous - smaller - monitor, I do not had that trouble. Its resolution was 1440 x 900 (same as the built-in monitor). In Fact, the Intel HD Graphics Card was the default one at these times. Once I replaced that monitor with a 22" (1920 x 1080) monitor, the AMD Radeon video card is running and the heath comes.
    BTW: I run Lion, Mt Lion and Mavericks and the trouble exist with all these OSes.
    Ideas ?

    The last version from July 14th (of course): 4.3.14
    As it was during the last years (far before the trouble comes).
    Nota:
    a. the trouble does not appears when I had my old external monitor who was 1440 x 900 (same as the internal monitor resolution),
    b. the trouble exists (appears) when I connect the external monitor (both 1600 x 900 and 1920 x 1080). It does not seems top be related to anything else.
    On Mavericks, when you click in the icon located in the right of the menu bar (notifications ?), and the gfxCardStatus application is running, you get a notification that said (something like):
    'AMD Radeom 8750' is active
    or
    'Intel HD Graphics 3000' is active
    It is not possible to set the GPU to Intel HD Graphics 3000 when the external monitor is plugged.
    I installed that application weeks ago / far after the hot start.
    That is why I say the fault comes from the AMD Radeom 8750 GPU !
    But, I may be wrong…

  • Tried to update the EFI on Macbook Pro 2011 & Crashed?

    Hey all
    So this is my new Macbook Pro 2011! FIrst apple producct ever!
    I installed a bunch of updates to my mac before & they worked fine- without issue
    but i recently tried to install the Macbook Pro 2.3 Firmware Update & the thunderbolt firmware update but something went horribly wrong
    The mac was plugged into the wall and the magsafe charger was lit green- and the update downloaded & seemed to have installed- but on reboot i got a horrible single beep & the HDD went out...
    Then after that it tried to reboot on its own 3 more times b/ci heard the fan- but it was without a display [just a black screen but no picture] & but the HDD kept getting cut off...
    I held down the power button for 7 seconds & it finally booted normally after a prolonged apple logo screen
    & now it seems to be working fine...
    can you guys tell me what the heck just happened? My macbook crashed? :[ /?
    btw system prefrences says the update is installed- but system update still says its avialable?? O_O

    Hey Pennyboy24,
    I have an early 2011 Macbook Pro and I also just updated to the Macbook Pro 2.3 EFI Firmware Update.  Mine updated fine but when the MBP restarted, it also made that single long single beep and it was slow to restart.  Once it restarted, everything seemed to be normal but now my System Updates don't work.  Everytime I click on System Updates, I get an error that says it crashed.  Since your System Update says the EFI Firmware Update is still available and my System Update now crashes, I'm thinking the update messed up something with System Update.  I've just spent weeks trying to get my OS X Lion working so this really ***** to have the EFI Firmware Update cause me another problem.  Anyone with suggestions?

  • Best ram for macbook pro 2011?

    I am thinking about upgrading my macbook pro 2011 with 8gb or 16gb (overkill?) of ram. Which is the best ram/bang for the buck?

    I upgraded to Crucial 16 GB on my MB Pro 6 months ago and have never, ever, even once been sorry or less than amazed.
    Of course, a Crucial 512 GB SSD does not hurt, either. They work together seamlessly.  Nice Mac, nice Mac.
    12 seconds to boot up from full Shut Down? Too cool ............................................................................... ..
    Leonardosanti says.
    PS FYI: My old Apple-supplied 500 GB hard drive is now separately enclosed and makes an excellent full backup. Using SuperDuper to clone, it is bootable albeit as a spinning disc hard drive it runs much slower. Had my old Snow Leopard system and files on it. Jumped to a clean install of Mountain Lion. Did all this myself, glad its done, whew, successfully. The Ram and the SSD are gems, like the Crucial support people.
    PPS Yes, these were expensive improvements. Ouch but ... Worth it.
    Message was edited by: Leonardosanti

  • Can i connect my cintiq 12wx to my Macbook pro 2011 through the thunderbolt using the mini display port to vga adaptor?

    I just bought my cintiq 12wx and was wonderding if i can connect it to my macbook pro 2011 through the thurderbolt using a mini displayport to vga adaptor? Please help!

    Yes, it should work with a mini-displayport to VGA adapter.  Since a 12wx also can take DVI you could use a mini-displayport to DVI adapter instead.  Why go analog when you can keep it in digital!
    I guess the usb is for the pen.

  • What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...

    As the topic says,
    What cable do I need to buy to connect my Macbook Pro (2011) to a VGA screen? I tried the "Mini DisplayPort to VGA", but apparently it doesnt fit the 2011 Pro version...
    Help me out please.

    Yes ... minidisplay
    But what I do not like in that picture (my personal view, others may think differently), is that there is much plastic around the connectors where the cable must fit.  You may ot may not be able to get the cable to *fully seat* with the adapter.
    Other adapters (http://www.microcenter.com/single_product_results.phtml?product_id=0334087, yes I know this is a DVI) hve no plastic barriers to connections.

  • Hello. I have a macbook pro 2011 that originally came with os lion (on the computer not a disk). What I did was I downloaded Os Mountain lion. There was nothing wrong with it but I just feel the battery life is too short. So what I did was I tried to do s

    Hello
    I have a macbook pro 2011 13" that came with OS Lion (integrated not on a disk). I recently bought OS Mountain Lion of the app store and it is working fine. However I was a bit dissapointed in the battery so I decided to try and downgrade and completely failed, I froze the computer and when I restarted it it did not work. I went into recovery system and erased my disk and all that and went to re-download my OS. I was expecting to get the option to re-download Lion but instead I could only re-download Mountain Lion.
    My question is since my computer originally came with Lion can I reset my computer so I get OS Lion back instead of OS Mountain Lion?
    Thanks for any help. Any answer will be appreciated even if it is saying it is not possible.

    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
        1.    Select Disk Utility from the main menu and click on the Continue button.
        2.    After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click on the Erase tab in the DU main window.
        3.    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
        4.    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Kappy, a pretty wonderful and very knowledgeable man, has tip for that which I have copied and pasted above

  • Macbook Pro 2011 charging behaving weird.  Charges and stops repeatedly and takes very long.  Help?

    So a few weeks ago my MacBook Pro 2011 started having charging problems.  I would use it normally.  Then plug it in to charge anywhere between 5-20 percent like I've been doing for the past year that I've had it (since August 2011).  Anyway, what happens now is that it charges but extremely slowly - at least 4 hours to fully charge as opposed to the 1 1/2 to 2 hours that it used to take.  Also, it seems to be draining a lot quicker than it used to while only browsing the internet.  Furthermore, while charging, the battery meter goes from the percent its charged to to "not charging" back and forth.  What's going on?  Is there a problem with my battery, my computer, or the magsafe charger?  [please refer to the pictures below to get a better understanding of my problem - these pictures were taken over a 2 hour time period - a time period that usually is enough to charge my computer] - if you'll notice, in the first two pictures, the percent barely went up by 10 in a half hour period:
    Here are my Mac power stats:
    Battery Information:
      Model Information:
      Serial Number:-----------
      Manufacturer:          SMP
      Device Name:          bq20z451
      Pack Lot Code:          0
      PCB Lot Code:          0
      Firmware Version:          406
      Hardware Revision:          2
      Cell Revision:          158
      Charge Information:
      Charge Remaining (mAh):          6156
      Fully Charged:          Yes
      Charging:          No
      Full Charge Capacity (mAh):          6393
      Health Information:
      Cycle Count:          343
      Condition:          Normal
      Battery Installed:          Yes
      Amperage (mA):          -1607
      Voltage (mV):          12182
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):          25
      Disk Sleep Timer (Minutes):          10
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Wake on LAN:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      PrioritizeNetworkReachabilityOverSleep:          0
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
      Battery Power:
      System Sleep Timer (Minutes):          20
      Disk Sleep Timer (Minutes):          0
      Display Sleep Timer (Minutes):          15
      Wake on AC Change:          No
      Wake on Clamshell Open:          Yes
      Current Power Source:          Yes
      Display Sleep Uses Dim:          Yes
      GPUSwitch:          2
      Reduce Brightness:          Yes
      RestartAfterKernelPanic:          157680000
      Standby Delay:          4200
      Standby Enabled:          0
    Hardware Configuration:
      UPS Installed:          No
    AC Charger Information:
      Connected:          No
      Charging:          No
    Does anyone have any idea what the problem may be?
    Thank you,
    macstr

    try doing a SMC RESET and see if that sorts it out for you.
    if doesn't work - better take it to Apple and have them look at it before something else goes wrong...
    good luck - hope you get it sorted out..

  • How can I setup my thunderbold display to work as my primary display? I would like to have my macbook pro 2011 as my second display. thanks

    I have and Macbook pro 2011 february. I have installed Lion with the lastest update. I would like to use my thunderbold display as my primary display. The same way when I close my MB Pro 2011, but I wish to use my Macbook pro display as my secondary display.
    thanks

    If your Mac has got Mini DisplayPort, purchase a Mini DisplayPort to HDMI adapter and a HDMI cable. You won't have to change any setting, and image will show on your TV after connecting it to your MacBook Pro. See > http://support.apple.com/kb/HT4241?viewlocale=en_US&locale=en_US

Maybe you are looking for

  • APERTURE LAG ON RETINA

    Hi I have the macbook retina 15' 16 Go RAM and i see that Aperture makes lag when i switch with Mail for exemple. If i active low resolution in 'information' of application, the lags disappear :  I hope that aperture know this problem, and will resol

  • User Exit for payment term

    Hi Friends how to write the User Exit for Payment terms at Item Level. Any Sample User Exits can help me if no exact User Exit Is there User Exit Name : USEREXIT_MOVE_FIELD_TO_VBKD Thanks in Advance. Regards sahiti

  • Why is AE getting error writing a file after finishing a render?

    I have been trying to create an MPEG4 file from a comp.  It renders successfully - at least, it does not display any render errors - but then gets an error when writing the file.  It creates a file, but the file cannot be opened by Quicktime, nor Pre

  • Why I have lost ALL my contacts without any reason?

    Someone help me! My iPhone 4S was charging when i look at the contacts and there wasn't any one.

  • LaCie Rugged Hard Disk stopped backing up

    I have been backing up my Mac on a LaCie Rugged for a couple of years.  I got so used to it working that I stopped checking to make sure it was backing up, and today I found out that my Mac has not been backed up for 105 days.  When I opened Time Mac