Slow motion and reminder setting

Guys,
Is there a function for slow motion and for setting a reminder for a program rather than recording?
Cheers
AW

No slow motion that I've found.
Reminder function see here.

Similar Messages

Slow motion and speedup during a single clip

Is there a way to take a single clip, and slow down portions of the clip, while speeding up other portions of the clip.
Is there a way to adjust playback speed using keyframes I guess is my basic question, so the start of the clip is slow motion, then the middle is played back at an accelerated or normal rate, then the end of the clip becomes slow motion again.
-Roger

Yes, is the short answer. Using the time remapping feature in the "effects" panel (top center of the screen, second tab from the left) you can set certain portions of the clip to play back at normal speed, then slow it down in certain sections, and then speed it back up. You can also cut the clip using the razor tool (in the tools panel at bottom right of the screen) and just reduce the speed of that section of the clip. The downside to using the time remapping (if my memory serves me - don't take my word for it) is that you lose audio, but the transitions from normal to slow-mo and back are much smoother. Using the razor tool, you simply place the timeline indicator where you would like to begin the slow motion segment, then cut the clip with the razor tool, the repeat the process where you want the slow-mo section to end. Then, select the section that you want to play back in slow motion, and reduce the speed. This is the method that was used before the time remapping feature was available. The transitions are not at smooth, but you can keep audio for the sections where the speed isn't modified. Just be sure to select the "ripple edit" check box when you modify the speed/duration setting of the clip (right click the video clip to get the speed/duration setting dialog box).

My imported avi file plays in slow motion and staggers. what do i need to do to correct ?

My imported avi file plays in slow motion and staggers. How do i fix this ? I am newbie, just started AE but pretty ok with Photoshop. its AVCHD , 50 frames per second

You can update the latest drivers for Nvidia Card.
Try to run composition panel at a lower resolution .
Refer to this link .

How to best achieve slow motion and fast motion

Hi - I am new to the forum and a basic user of Premiere Pro CS5. I am working on a project shot at 24 fps, and would like to do slow and fast motion.
From what i understand there are 2-3 different ways to do this in Premiere - choosing speed/duration of the clip from timeline, or choosing time remapping form effects panel ot using rate stretch tool. Wondering how do these compare and which is better - any pointers for this will be great help. Also is slow motion and fast motion better done in After Effects than Premiere. Or any recommended plugins that would work on cs5 and cs5.5. Thanks.

The main difference between using time-remapping and just using time-stretching is that time-remapping allows you to change the speed quite flexibly at different times in the same clip, whereas stretching just changes the rate for the whole clip.
See this page:
"Change speed and duration for one or more clips"
> Also is slow motion and fast motion better done in After Effects than Premiere.
After Effects has far more control, especially with regard to how new image information is created between the original frames when you change speed and require frame interpolation (frame blending). Pixel Motion and Timewarp use a very advanced motion vector method (based on the Foundry's Kronos software) for doing this.
See "Time-stretching and time-remapping".

Slow motion and other effects are grayed out

Just switched from iMovie 9 to 11, and can't take advantage of the slow motion, instant replay and other effects, because they are all grayed out in the Clip menu. Why? I do not see the "convert entire clip" option referred to in the help file. What is wrong?

Yes, that is it. The trailers are pretty scripted.
If you want to add an effect to a trailer, first complete the trailer.
Then, in the Project Library List view, right click on the trailer name, and select DUPLICATE. (This will give you a copy of the trailer in case you want to edit it some more.)
Then, with the trailer name still selected, click FILE/CONVERT TO PROJECT.
This will turn your trailer into a normal project, and you can use any of the capabilities of iMovie, including the slow motion and instant replay effects.

Slow motion and Normal speed?

Can I take video shot 720p at 60 fps and use both slow motion and normal speeds in the same video??

Time Stretch is where I would start. If you need to apply that Effect to only part of a Clip, just use the Razor/Scissors Tool, to Cut that Clip, into the segments, where you wish to apply Time Stretch.
Posterize Time can be effective, as well, but from my reading of your needs, I think that Time Stretch (Rt-click the Clip, or Clip segment and apply).
Good luck,
Hunt

Slow motion and trailing in premiere pro cs6

attached is a sample of a clip edited years ago with liquid edition.
In liquid edition "timewarp editor" you could create slow motion together with trailing effect as it shows in the attached clip.
I wonder if it can be done in premiere pro cs6
thanks arikw

Well, you could do it manually if you wanted to. Just pile up a few tracks of the same clip and offset each one by a frame or two from the others. Then set the opacity to something low, like 25%, and see how that looks.
There may be an effect for it that I just am not familiar with.

Odd issue with slow motion and exporting

Hello,
I have a project with footage taken at either 24p or 60i settings on a Canon HF200. I'm using 7.0.1, ProRes 422 selected. Frame size is set to 1920x1080. I'm exporting using the "Share" menu and the Apple TV preset.
The project is divided into sequences. One of these sequences (whose source material shot using the 60i setting) is set to play in slow motion using the "change speed" option set to 50%.
Here's the odd part, to me at least:
When I export just the slow motion sequence of the project, it plays perfectly (good quality, smooth not jerky, no shadows/trails). But when I export all sequences joined together, the slow motion sequence (and just the slow motion sequence) appears stuttery, with trails on every action by the actors.
Another odd bit: when I export just a subset of the project including the slow motion sequence and everything after it, again the slow motion sequence plays as intended, after export. So the problem only occurs if I export the slow motion sequence with anything before it included.
Thanks in advance for any help.

Problem solved, but I'm not sure if it was my re-importing the clips, or un-checking the "frame blending" option that did it. I did both for no particular reason, and one of them worked.

Slow motion and frame rate and shutter speed

I have two cameras that record 60i and three that use 30p. Neither of the 60i cameras has a 30p option (one has a pf30). If I understand how FCPx handles this, if I drop both frame rates into a project, I get 30p out, correct? In effect de-interlacing the 60i footage to 30p. Is it best to import the 30p footage first to set that frame rate so that the 60i gets rendered to 30p?
We're producing a fishing DVD so good quality motion footage is important. This is an instructional DVD so I will be using some retiming to slow footage down to illustrate key points in the instruction.
I've read a lot of stuff on 1080i 60i vs. pf30 vs.30p vs. 24fps and benefits of using 720p vs. 1080i. Also looked at information on slow vs. fast shutter speeds.
So, the bottom line to get the best motion results for the DVD, I should be shooting at best bit rate possible, use 1080i 60i or 30p depending on the camera and let FCPx set everything to 30p. Correct?

For the 1080/60i media, it is best to have FCPX conform it to 30p (29.97p). [30p is a real timing: 30 exact frames per second, but it is not broadcast compliant. 29.97 is quite often simply referred to as 30, just for simplicity and/or laziness. The final decision for which to use rests with you. Also note, like "30 fps", 60 more often refers to 59.94 fps... for the same reasons.]
As for your target being DVD: DVD is always 480 lines whether it is anamorphic (16:9) or standard 4:3. If you would like to have "enhanced" slow motion, my recommendation would be to shoot in 720/60p (which is genuinely progressive "60" frames per second) and will give a slightly better edge on slow motion effects (retiming). That said, FCPX retiming is usually quite good no matter what the frame rate (frame blending recommended over optical flow [which tends to give a "morphing" effect when pushed too far].) 1280x720 frame size will give you plenty of downsampling resolution for DVD as well. [I *believe* that FCPX will use all of the 60fps available from the original video in retiming, even if the frame rate of the project is slower than the original media; so, 720/60p conformed to a 30p project and retimed to 50% will use every frame of the 60p slowed down by half... (somebody correct me if I'm wrong!)]
Best bitrate is also an important feature, but that is not due to the choice of format as much as that provided by the camera itself. Bitrates out of the camera may be relative to the frame size (they are in my consumer camcorders). A common consumer grade camcorder will top out at a bitrate (for 1080) somewhere between 17.5 and 22.5 Mbps, whereas an HD capable DSLR will usually top out at (easily) *twice* as much (45Mbps average from my Canon T4i) or more. Furthermore, the DVD standard imposes framerate restrictions (max is somewhere between 5 and 8Mbps -- the software that creates your DVDs will usually transcode for best bitrate, so not something you really need to bother with - just set the transcoder to best possible quality and provide it with the best quality video that's reasonable.) Whichever camera provides the highest bitrate should be your "main" camera.
As you may have discovered: another factor for a quality video regardless of camera is shutter speed. If you set the shutter speed too high (faster than twice the frame rate) then you will have "stuttering" issues (there will be "gaps" from still frame to still frame). Keep the shutter speed at the same or no more than twice the frame rate: e.g., for 1080/30p (target) the shutter speed should never be more than 1/60th of a second (I'll use 1/30th, 1/40th, or 1/50th usually). I haven't shot a lot of 720/60p, but I think I would still keep the shutter speed at between 1/60th and 1/120th exclusively [that is -- I wouldn't go as high as 1/120th or greater... but that's me... you should experiment for best results for you. If this creates exposure issues, then consider neutral density filters or circular polarizing filters to help bring scenes into exposure range (via aperture or iso or both.)
HTH
Good luck! Have a good shoot!

Slow motion and audio

Hi everybody:
How can you slow mo a clip, and keep the same unaltered audio. I thought detaching audio before doing the slow mo would do it but no the audio is distorted/ and or shortened in length and cannot be lengthened to cover the entire clip again. Is there a way??????
Thanks,
Luis

I go back to the events , take an area surrounding the same clip that is long enough to fit the slow motion clip's length. Drag it up to the slow motion clip in the project and choose audio only when the dialog box appears. then adjust the length of this audio clip to fit. Remember to set the slow motion clips audio to zero in the audio adjustment menu.
Covering the slow motion audio used to be a real pain in iMovie6 and is now one of the best features of iMovie9.
I make mostly sports videos so getting background sound from anywhere in the events is easy.
you could also use stock clips of ambient sound from the sound effects area

Intermittant problems with slow motion and crash of Premiere Pro

Many complain about Premiere Pro's instability.
Since a couple of days I have the same problem. Every time I want to navigate from A to B, Adobe seems to either introduce a severe SLOW MOTION effect on it's own accord, that I never put in !!!, or it just CRASHES with an error message along the lines "Problem, Try again" or similar.
This is utterly frustrating !!! I have been trying for over 6 hours today to get this remedied, but no luck.
Looking back over the past days, the problems seem to have grown exponentially both in frequency and in duration.
Of course, this is not about the program, but about the Premiere Pro Forums.
Is there a 300-day refund period for Jives???
I suggest you use that opportunity Adobe. This is

OK, that makes sense.
OS: Vista 64 Business
Browser: Firefox 3.5.2 and IE 8.06
Symptoms:
1. The connection has been reset, try again. Often after 15 minute waits.
2. Nothing happens, just waiting for Adobe and even after 30 minutes, still waiting.
3. After posting, nothing happens. You press the post button, nothing for ages. You press Cancel, nothing.
4. All other pages load without problems and are responsive.
5. Top participants listing and most popular discussions are not displayed.
Do you need further information?

Unknown error. Slow motion and Panorama photo

Hello guys.
I just bought a Z2.
I was trying out the phone today and was trying most of the camera features.
Everything works fine exept when i try to film Slow Motion (dont remember the feature) and when i started filming, i got the message: "Unknown Error" the second i pushed the record button.
And when i try to use panorama it worked for 3 seconds and then it gave me half a panorama shot. After that i tried again and now i get the message: "Turn slower" or something like that. That i get after 2-3 sec. Then i try again and again. And now i get the message "Turn Slower" the second i press the photo button.
So something is wrong here.
Is this something everyone has a problem with? Do we get an update / Fix for this soon?
Is there something i can do to fix it?
Just one more question.
I got a smart band with my Z2, and when i tried to connect it to the phone, i got the message: "Chip is empty".
What does that mean? I got that message about 20-30 times before i suddenly could connect to it. And then the band disconnects alot, and when i try to connect it again, i get the same message and have to try a few times before it works again.
Have a great day people.
Solved!
Go to Solution.

That seems odd, try this
settings > apps > all > camera > clear data > restart your phone > check again
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

When i upload my videos to pc, my videos play in slow motion and sound is not with video? help!!!!!!

i have two iphone 4s, and everytime i try to upload my videos, sound is ahead of the video and video is in slow motion??? my pc is not hd and that may have something to do with it, just looking for answers!!! I have a desktop that i am looking to have upgraded with better stuff, just curious what i need if that is the problem.

Yvonne-
I haven't tried videos on my camera yet. Do you use the Videos App to play them? I don't think they will play in the Photos App.
If yours are in a format that is not in Vazandrew's list, you may need to sync them to your computer and convert them to M4V or MP4 format. You can use a program like HandBrake to do the conversion. <HandBrake> Once converted, you can sync them back to the iPad and they should play.
This may not meet your needs, but the alternative appears to be getting a different camera. I don't know of another Video App that might work.
Fred

IMovies 10.0.4: How do I get Slow Motion and Fast Forward (Speed Editor) to function?

I am using iMovie 10.0.4 and cannot get fast-forward or slow-motion functions to work. I have organized my clips into a Project and attempting to edit them in the Timeline. With the target clip selected in Timeline, I am unable to access the fast-forward or slow motion functions in the menu bar nor by right-clicking to select the Speed Editor. Example screenshot below. Thanks for any help you can throw my way.

Hi,
I have this problem too.
Do you have the issue only on new projects ?
Do you still have an old project where you used slow motion ? if so, just duplicate the project and cleanup all clips from the new project and you have a clean empty project with working speed controls. It works for me.
Let me know.
I've created my own question about it because I didn't see yours at first.
iMovie 10.0.3 on OSX 10.9.4 speed controls disabled on new projects

Imovie shakes on Slow motion and transitions

Hi everyone, hope someone can help me.
I recently went to a wedding and my mum video'd it. As part of the present for the bride and groom I wanted to get a nice song and put snippets of their day into a small video. I have used either cross-disolve or the other one (overwrite or something its called) in between the clips and I have also slowed one of the clips down to make it look like slow motion. On the computer this was fine and then I put it onto DVD and when I played it through the DVD the transitions and slow motion are really jerky as if its shaking. It doesnt do it all the way through, its really just at the beginning of the DVD and then it settles and the last 30 seconds or so are wonderful. Can anyone advise as to what to do?
Thanking you in advance
Tracey

Tracey: Post your query under the iMovie topic category for probable better response.

Slow motion and reminder setting

Similar Messages

Maybe you are looking for