Slow moving 6230i

Anyone else having problems with delayed functionality on their phones? Both my wife and I have recently upgraded from the 6230 to the 6230i, and although I love my phone, it tends to move from function to function quite slowly. I called Nokia and they said they are not aware of any problem but it seems rather odd that its happening to both of our phones.

Yes, I also felt that the 6230i was more "slugish" after using a 6230. You can try to take the 6230i to a Nokia Service Center and asking them to upgrade the firmware of the phone for you - this might make a difference.
The main thing you need to remember is that the 6230 and 6230i makes use of the same CPU and the 6230i has a bigger display area and a newer user interface. This does consume more of the system resources it has.
Hope this helps.
PS. Respect for posting on a message that was last active in 2005. It is very often frowned upon here if one does that.

Similar Messages

Report for slow moving material.

Hi friends
I want to create report for slow & fast moving materials..
I have to add following fields in the report
Material, Unit of Measure, Current Stock, Value, Last consumption date, Last movement date...
Now I dont have all these fields toghether in any of the datasources..
What I need to do? Should I create new Datasource with all these fileds..
Has anyone done this kind of report before?
Please suggest..
Regards
Swati

Hello,
For slow moving materials , use can use InfoSet to design the same.The infoset will have 0Material on the left hand side and the DSO which holds the transcation data.
or
u can install the standard content 'slow moving material' query and multiprovider 0ic_mc01.
You can get some help from there.
or
try searching in forums with the messgae "slow moving items".you will get useful info.
Regards,
Dhanya

Report on Slow-moving item in sap MM

Dear All,
I am facing problem in preparing functional specification for a Z report.The requirement details are given below
MC46 gives me a list of all items that have not got consumed since the last period (defined in terms of 'no of days' on the screen before executing the report) This report give a list of items that have shown nil consumption in the defined period. This list helps us analyze and categorize these items as Slow-moving or Non-Moving items. The output is in terms of Part no and Part Description.
Example; Suppose we are executing the transaction on say 29.10.2013.The system ,say give list of materials X1,X2 and X3 with nil consumption in the defined. The transactions suppose is again executed
on 29.10.2011.The report say again give a list of materials X1 and X3 with nil consumption. The material
X2 is excluded from the report as it might have been consumed in certain business processes(either issued to cost center or issued to production).
The client wants a report from where it is possible to determine a list of materials along with consumption
and the date on which the material have moved out of stock for consumption. In otherworldu2019s we can say the report should give :
                    stock on starting date(say 29.10.2013)
                    Consumption/movement in terms of date and quantity
The problem is that when the transaction MC46 is run the next time(say on 29.11.2013 or any day after
29.10.2013) there might be materials which might have got consumed in the interim period and therefore have got excluded from the latest list. We need to have a look at these interim materials to analyze their movement/consumption.MC 46 Report does not give details of openinf stock, closing stock and the purpose for which the stock have moved out of stock
The client wants a Z-Report which will give details about the material which have moved out of stock when the report will be executed ,opening stock,closing stock.The detail requirement are given below
The report will assist the client to get a list   of all such items with reference to a starting date and their movement in the period (period from the starting date to the run date)
Selection Screen(Input)
Opening Date
Closing date
Movement type
Plant
Output
Material nos(Material which have moved out of stock when the program was last executed)
Movement type
Movement date
opening stock qty
opening stock value
closing stock qty
closing stock value
I request if any one can help in preparing functional specifications.

thanx for reply ,
but plez read the requirement above mention.i understood what are you saying .

Slow moving items:repost

Hi,
In this link, in slow moving article on page 12,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb7eb390-0201-0010-498c-80532df171a5">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bb7eb390-0201-0010-498c-80532df171a5</a>
is the 1rowcount Kf coming from the infoobject? how does it show the KF values when an IO doesn't have values?
someone can please read it and explain me in simple steps how it's done?
Thanks,Sam

the 1ROWKF is a special KF, made available by OLAP (say). You can think of it as having a constant value '1' per row. Since it is a fixed value, it doesn't need to be stored anywhere.
Let us say you have 0Material as the infoobj and 0mattype as its attribute. And this is your master data:-
Material----
type
M01 -
HALB
M02 -
HALB
M03----
FERT
M04----
FERT
If in your report (which has this infoobject), you put the nav attribute MATTYPE in rows, and 1rowKF in columns, you will get
Mattype----
1ROWKF
HALB----
2
FERT -
2
As mentioned, since it is just a counter, it doesn't need to be stored.

Slow moving material

Hi,
Can anyone wil give me an idea how to calculate the slow moving material for the last 3 and 6 months with out inbuilt report and without using no of records fields provided by SAP.. can we calculate based on the good issue based on last 3 and 6 months.. my requirement is client wants to now which is material which is does not have movements in past 3 tro 6 months...
Thanks
Anjali

Check the below PDF.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/11291595-0501-0010-c881-e02c27261b55
Hope this helps.

Slow moving stock

Hi Guys,
I am wondering if there is any standard report or a table in SAP to look for 'Slow moving stock' ? I am trying to find out the usage/consumption of particular materials or when they are last moved?
Thanks for your suggestions,
Regards,
Kelly

Hi Kelly,
Please check MC46 slow moving items & MC.A (you can choose 'last goods issue' / 'last goods movement' fields from layout).
But there are several other stock reports. (e.g. MC50 dead stock)
BR
Csaba

Slow moving /non moving stock

hi sap gures,
plz tell me what are the slow moving and non moving stock.give me SAP standard t codes for these report if its there in sap.

Hi Prasad
for Non moving T- code *mc 50
for slow moving stock T-code-mc46*
Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
Dead stock is the part of your warehouse stock that has not been used for a certain period of time
for further details pls refer
link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
Regards
Vikrant
Edited by: Vikrant Choudhary on Feb 23, 2009 12:06 PM

Slow-moving items

Hi,
How is it that the standard report 0IC_MC01_Q0001, displays just slow-moving as it doesnt seem to have any condition on issued or valued stock it seems to just display all the values but not the above key figures with zero values. Should we create conditions on them. am i missing something.
Thanks,
your help will be rightly appreciated

Hi,
Generally in R/3 side,
MC46 is the standard transaction code for the SLOW MOVING ITEMS. In that transaction code u can see all the details about the slow moving items. Through that transaction code u can check what are all the things are missing in BW side.
Thanks,
Sankar M

Slow moving materials

Scenario:
Slow moving material: When a material is lying in a storage location for 1 month afte the date of GR, it is declared as slow moving.
I wnat to track the movement and its value. Shall I create a new St Loc for Slow moving materials?
Please detail.
Regards
VS

Hi VS,
An ABC analysis divides items into three categories:
A: Important
B: Less important
C: Relatively unimportant
Just go thru the link provided:
http://help.sap.com/saphelp_47x200/helpdata/en/c1/375b7e449a11d188fe0000e8322f96/frameset.htm
Hope this helps.
thanks,
Viswanath

Slow Moving Materials with qty

Dear Experts,
Is there any report to see the slow moving Materials with stock qty ?
Regards,
Manish Jain

Please check this answered link:
Slow Moving Report
slow moving report
Edited by: Afshad Irani on May 19, 2010 10:38 AM

Slow Moving Project Stock

Hi,
My problem is to find out slow moving project stocks. Report MC46 shows only slow moving normal stocks and project stock is not included in this.
Thanks

Hi Gaurav Shah,
If you are procuring for project stock means, the material is for direct consumption.I think its not logical to see it in terms of "slow moving stock" category.
Hope I am right and it will be useful and give you some insights.

Slow moving and non moving inventory

Hi Guru's,
I have to prepare a report of slow moving and dead stock report. so can anybody will help please....

Hi,
Try with folowing t.codes,
MC50 - Dead Stock ,
MC46 - Slow-moving items
Regards,
Biju K

Slow moving inventory

Is it possible to query a report on slow moving inventory items for a given time period?

Ankush,
Not sure what exactly you are looking for here is a query that gives onhand value of all the items that have not been moving for sometime. It is first cut, so there may be a need to revise.
/* Formatted on 2008/05/06 22:49 (Formatter Plus v4.8.8) */
SELECT moh.inventory_item_id, moh.val, mmt.transaction_date
FROM (SELECT a.organization_id, a.inventory_item_id, SUM (transaction_quantity * item_cost) val
FROM mtl_onhand_quantities_detail a, cst_item_costs b
WHERE a.organization_id = b.organization_id
AND a.inventory_item_id = b.inventory_item_id
AND a.organization_id = &org --change to your organization
AND b.cost_type_id = 1 --assuming standard cost, If it is average cost take it out
GROUP BY a.organization_id, a.inventory_item_id) moh
, (SELECT organization_id, inventory_item_id, MAX (transaction_date) transaction_date
FROM mtl_material_transactions c
WHERE organization_id = &org ---change to your organization
GROUP BY organization_id, inventory_item_id) mmt
WHERE moh.inventory_item_id = mmt.inventory_item_id
AND moh.organization_id = mmt.organization_id
AND TRUNC (mmt.transaction_date) <= TRUNC (SYSDATE - 110)
Thanks
Nagamohan

Slow Moving Inventory - List Material where Sales Goods issue is 1 Year

Hi Gurus,
One of my Clients is looking for a Slow Moving Inventory Report in BW where the Sales (PGI) for the Material did not happen in the last one year.
Could you please help me with the best way to accomplish this requirement?
Thanks
Srini

Hi,
Just try this, if it works( i think it should work) then you wont have to code for virtual KF/chars and this will also boost the performance wrt Virtual KF.....
Get your data for the last year..and Set condition where Sales = 0.
So this should filter data and you would get data where Sales = 0.
Let me know if this is working or not
Thanks
Gaurav
Assign pts if this helps*

Slow Moving Items in 0IC_MC01 Performance issue

Hi i am creating slow moving items report (Report which shows materials for which no transaction has been done for last 3 years) on MP 0IC_MC01 in BI7.0.
MP is based on cube 0IC_C03 and Infoobject 0MATERIAL .
In query i put rowcount in coloumn with Infoprovider 0material with constant selection but i dont get the option "Display values not posted" . and Issues value and Recved value .
in rows i put plant , material and material type
n put one condition values for issued and Recid = 0 .
and in filter we have calender year restriction .
But the proble is dere are around 25000 materials for each plant and its taking a lot of time to exceute for multiple plants for 1-2 years , can anyone suggest the best way for this report or how performance of this report can be improved .
Help will be appreciated .

Its rather better to use infoset on 0IC_MC01 and Material than using MP. The performance issue is coming because of a join between cube and infoobject, which SAP dont suggest to use.
You ahve to use left outer join to get slow moving items.
http://help.sap.com/saphelp_nw04/Helpdata/EN/67/7e4b3eaf72561ee10000000a114084/content.htm
Thanks...
Shambhu

Slow moving 6230i

Similar Messages

Maybe you are looking for