Slow Moving Project Stock

Hi,
My problem is to find out slow moving project stocks. Report MC46 shows only slow moving normal stocks and project stock is not included in this.
Thanks

Hi Gaurav Shah,
If you are procuring for project stock means, the material is for direct consumption.I think its not logical to see it in terms of "slow moving stock" category.
Hope I am right and it will be useful and give you some insights.

Similar Messages

Slow Moving/Dead Stock Report

Hi Guys
BEsides T.COdes MC46 and MC50 what other reports that are available on SAP to give the same information and also their Current Stock Balances
Vishnu

Hi,
Why do you need other reports?
What is it that these reports cannot provide?
If we can know what you want from the report we can perhaps suggest options. But these two reports are designed to provide the information relating to slow / dead stock and so they should be very useful?
Steve B

Slow Moving Stock Report

Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
Rang

Hi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle

Report on slow-moving items

Hello gurus,
I would like to creat a report on slow-moving items in LIS, similar to report RMCBLH30 (TAC MC46).
But in 'my' report I would like to see only those slow-moving items in stock. RMCBLH30 unfortunatelly gives my all slow-moving items, even those with quantity = 0.
Could someone please give me a hint on how to do this? Are there any good tutorials in building LIS-reports?
Thanks in advance
Alicia

Hi,
Please check the last date when any of your stock movement had an accounting impact like GR, GI etc and see whether the data tallies
In MC46 try for double line display tab. It shows last movement date.
Also, check for Detailed Display for each material. It will show the details based on which it is picking last movement date and No movement since days.
From this details you can make out the date which it is taking as last movement......
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock
If you want to generate a Z-report please take the help of technical consultant...
regards,
Patil

Slow moving items report for project stock

Hi ALL,
We are using project stock to manage all of our inventory. As the standard slow moving items report (MC46) does not contain project stock (special stock Q), we would like to develop a report then. "Slow moving" should be identified by material, plant, storage location and WBS.
Has any had this experience? What's the main data logic for this report?
Thanks a lot!!

Dear,
Do One thing.. First goto MB5B - stocks on posting date and select to display only special stock indicator Q (Project). By this you can abstract all Project materials. Save the output into Excel. (The main aim is first abstract the project stock materials into a list with a suitable transactions - MB5B or MB52).
Then run MC50 or MC46 using these materials saved in excel file.
Try this.
Regards,
Syed Hussain.

Moving avergae price updation in material master for project stock

Dear All,
My query is pertaining to updation of MAP( moving average price) for project specific procurement ( as project stock) for valuated project stock.
As definelty the cost of procurement gets consumed by project .but i want to know does the project stock procurement still updates the moving avergae price or not.
Ex:-Suppose MAP in material master is 10 USD ( with qty 1)and i procure the same material ( qty 1)for project with account assignment Q for 9 USD . now will the MAP in material master becomes 9.5 USD or it remains 10 usd.?
Please reply urgently
Regards
Amit

Hi Amit,
If your Project Stock is valuated, then, the valuation data for it is stored in a different table: QBEW.
The normal, anonymus warehouse stock (the unrestricted use stock which is not assigned to any project or to any sales order) has its valuation data stored in MBEW.
The "Accounting 1" view in the Material Master MM03 ONLY displays the data of MBEW.
In the material master you will never see the valuation data of the valuated project stock (table QBEW) or the valuated sales order stock (valuation indicator "M" - table EBEW).
The valuation data for the tables QBEW and EBEW can be seen in SE16 or in the transaction MBBS.
Also note that these valuated special stocks are managed independently of the normal stock. If, for example, you change the Moving Average Price of your normal stock in MBEW, this will not have any influence on your project stock, as the data is under a totally diferent table QBEW.
I hope this helps you,
Esther.

Moving Average Price for Sales stock and Project stock of a material

Hiya Gurus,
                 I am developing a report to display inventory details. My requirement is that I have to display the Moving average price of a material for all Valuation type. I also need to display the Moving average price if a material has got Project stock or Sales stock.
                 In MBEW table I can get the Valuation type and its Moving average price, but how can I find the moving average price for the same material if it has got Sales stock and project stock. Please let me know the table and field where I could get the relevant data.
                Kindly help me on this, it would be deeply appreciated.
Cheers,
ZIa

Hi
can you look at tables
EBEW                             Sales Order Stock Valuation
QBEW                             Project Stock Valuation
Nat

Moving average price in case of project stock

Hi,
How to check the moving average price of a material in case of project stock?
T code or table will help..
Regards,

Hi,
Since project stock is a special stock, it is procured and cosumed against that particular project / WBS Element, you will not get value of it as a movong average price , may be you will get the same in project progress report. You can check report MBBS - Valuated Project Stock
Regards,
Vikas

Slow moving stock

Hi Guys,
I am wondering if there is any standard report or a table in SAP to look for 'Slow moving stock' ? I am trying to find out the usage/consumption of particular materials or when they are last moved?
Thanks for your suggestions,
Regards,
Kelly

Hi Kelly,
Please check MC46 slow moving items & MC.A (you can choose 'last goods issue' / 'last goods movement' fields from layout).
But there are several other stock reports. (e.g. MC50 dead stock)
BR
Csaba

Slow moving /non moving stock

hi sap gures,
plz tell me what are the slow moving and non moving stock.give me SAP standard t codes for these report if its there in sap.

Hi Prasad
for Non moving T- code *mc 50
for slow moving stock T-code-mc46*
Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
Dead stock is the part of your warehouse stock that has not been used for a certain period of time
for further details pls refer
link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
Regards
Vikrant
Edited by: Vikrant Choudhary on Feb 23, 2009 12:06 PM

Dead stock or slow moving items reports

tell me any standard report t.code for dead stock or slow moving item..?
actually in our system mc50 is not working...in selection field it pick only one material ..not by material group so how i can get the dead stock report?
Regards
Rekha sharma

pls tell me the input selection field for mc46...
scope of ranking list
no. of days up to last consumption from--to--
actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
regards
Rekha sharma

Report on Dead stock and Slow moving stock

Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
Deva

Hi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB

Dead stock and slow moving material

Hello,
I need to find out how to get dead stock and slow moving materail manually from tables.(instead of using MC46, & MC50).
Could you please tell me the logic and tables needed to retrieve this data.
regards
Gaurav Maini

use table mseg and mver
logic is calculation of frequency of movements
regadsr

Non-Moving /Slow Moving stocks

Hi
Is any Standard Oracle Report available which give
us the Sub_inventory wise/Item wise stock which are
not moved (i.e. No transactions are happening since a
given date).
I hv check the Inactive Item Report available in
Inventory. What is exactly this report ?
Can anybody help us.
Regards.
Navdeep

hi,
The reports gives you an idea abt which stock is not used from many days or which is not even used or had no movements for the same...When you see the report you can give the periods in between which the system evaluates the materials movements...if the material has no movement in the given period it is called dead stock...and if the material is consumed out of it for given period then it is called slow moving stock..
Pls check both the reports carefully...
Check MC46 - slow moving items
MC50 - Dead stock(You can say dead stock as non moving stock )
If there is no selection shown by the system then it means that all the material/stock is used properly on time and is consumed properly...
Regards
Priyanka.P
Edited by: Priyanka Paltanwale on Dec 2, 2008 7:27 AM

Queries to extract slow moving stock

Hi All,
I have the following queries to extract the item list. May I know how to modify this queries to filter slow moving item where Purchase date are over 90 days older than today date. Example, today is 01/05/15 the report will list only item where purchase date are older than 01/02/15.
SELECT T0.[ItemCode], T1.[ItmsGrpNam], T0.[ItemName], T0.[LastPurDat], T0.[OnHand], T0.[BuyUnitMsr] as 'uom', T0.[LastPurPrc], T0.[OnHand]*T0.[LastPurPrc] as 'Est Stock Value'
FROM [dbo].[OITM] T0 INNER JOIN [dbo].[OITB] T1 ON T0.[ItmsGrpCod] = T1.[ItmsGrpCod]
WHERE T0.[OnHand] >0 AND T1.ItmsGrpNam <> 'SP001-Spare Parts'
Thank you,
Annie

Hi,
Try this query:
SELECT T0.[ItemCode], T1.[ItmsGrpNam], T0.[ItemName], T0.[LastPurDat], T0.[OnHand], T0.[BuyUnitMsr] as 'uom', T0.[LastPurPrc], T0.[OnHand]*T0.[LastPurPrc] as 'Est Stock Value'
FROM [dbo].[OITM] T0 INNER JOIN [dbo].[OITB] T1 ON T0.[ItmsGrpCod] = T1.[ItmsGrpCod]
WHERE T0.[OnHand] >0 AND T1.ItmsGrpNam <> 'SP001-Spare Parts' and datediff(day, T0.[LastPurDat],getdate()) > 90
Thanks.

Slow Moving Project Stock

Similar Messages

Maybe you are looking for