Slow net connection...

i m using dial-up connection.....
i hav n73 with software version 2.6.
any one tell me how much time it will take to upadate.
Is ther any other way to upadate ? except online

Chances are you'll brick the phone updating via dial-up net connection because it is known to be unstable and can interrupt the update process..I'd suggest that you got a Nokia Service Center and have them update the phone themselves.

Similar Messages

  • Slow net connection after Yosemite - someone please help novice

    so i have read quite a lot on here which has all been very interesting so i hope you will bare with someone who really does not know a lot about computers.
    Since the dreaded Yosemite upgrade my mac has ground to more or less a total halt trying to open the internet in any number of browsers (safari and firefox to name but two).
    I have been able to run a speed test and says my wifi has my 60+gb download speed and about 6 upload so no issue there.
    I am confused to say the least what has gone wrong as my phone and iPad seem to work ok. Can anyone tell me in simple terms if there are any solutions what the problem is as i am really crippled and my business is suffering.
    PS Apple i am really not impressed by this totally botched upgrade and when going into a store to see one of the technicians they will only see you if you pay.. this is your fault i might remind you.
    Grant
    London

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Wi-Fi Problems in OS X Yosemite
    Wi-Fi Problems in OS X Yosemite (2)
    Wireless Diagnostics
    Also try turning off Bluetooth.
    Troubleshooting Wi-Fi issues in OS X

  • I have an ipad3(wifi  cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

    I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

    haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

  • HT1766 I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please a

    I have an ipad3(wifi +cellular). Now i want to upgrade my iOS5.1 to ios 7. But download speed in our country is too slow(100kbps). It can be disconnected anytime. Is there any problem if net connection get disconnected while upgrading ios? Please ans me.

    There is something Definitely wrong with iOS 7 regarding DATA USAGE being logged to wireless carrier in for WIFI instead.
    I read all the previous replies and same issue.
    I rarely use my mac to sync....its all wifi sync for the last 2 years....never had this issue before... and i know it began with iOS7.... here is why....
    My iPhone was at home when I updated to iOS7 connected to wifi...but it logged Data Usage to Rogers Wireless (700MB approx)...data will never do an update over 50mb in app store (it gives the warning to use wifi) I play a lot of games and pay for them so I always update through App Store.  2 weeks later, simposons halloween update (650mb)...at home, using wifi.
    Rogers told me there was 700+mb data usage on the day of update and 650+mb data on oct 1.st (tapped out).
    Went over my 6GB plan and paid the fees.
    This has never happened before...It must come to apples attention by now...

  • I got my code but when i try downloading it it says retry as net connection is slow, but i am on a high spee broadband and all the other sites are opening simultaneously then why this problem?

    I got my code but when i try downloading it it says retry as net connection is slow, but i am on a high speed broadband and all the other sites are opening simultaneously then why this problem?

    Because Apple's not spent those billions of bucks lying around on a modern, high-speed delivery system or providing DVDs for those who don't have high-speed connections or uncapped DL capabilities.

  • Help needed:MBP net connection slow on OSX but fast on Vista...

    Ok..I've searched these forums for a while, seen lots of posts taking about people having problems with their airport card, routers and the like..but I haven't seen anyone having quite the same problem as me. My 17" 2.33Ghz C2D is linked to my 1Mb ADSL internet connection via an Aztech DSL600EW modem router.The problem is that the connection speed is really slow when I'm running the machine on OSX. I know it's an OSX thing cos the same machine,connected to the same router and running Windows Vista via Bootcamp will connect to the net ALOT faster. For example, if I'm viewing videos on youtube with OSX, I have to wait every few seconds for the video to buffer, but on Vista, the buffering is way ahead of the video. Another example would be downloading files...say from rapidshare. The typical download speed I get on OSX would be around 5-10Kbps, but with Vista, I get at least 25Kbps.
    I'm quite new to OSX, and still trying to learn my way around the operating system. It seems such a pity for a really great machine with a really great operating system to be let down by slow internet connection. I hope someone out there will be able to help me sort this out. Thanks in advance.

    Great, happy that it "seems to speed up things ..." Why not run the SpeedTest and "know?"
    I use IPNetTuner ($30, free 21 day trial).
    http://www.sustworks.com/site/prodiptxoverview.html
    "*Why is it Sometimes Necessary To Tune TCP/IP*?
    TCP/IP is not controlled by any manufacturer and is designed to work on almost any kind of underlying network with widely varying characteristics.
    To meet this challenge, the protocol designers made TCP adaptive. TCP is self monitoring and optimizes its own behavior to match the network environment.
    *Why can't somebody just write a utility that analyzes my network and automatically selects the optimum settings?* Such a tool would be both useful and popular. The answer is they already have, it's called TCP/IP, but sometimes it needs a little help.
    In most cases, TCP works remarkably well all by itself. Tuning is needed in those cases where TCP doesn't quite get it right because the the network behavior is outside the expected range. Typical problems include:
    Asymmetric connections that are much faster downstream than upstream.
    High performance connections with relatively long latency ..."

  • Slow i-net connection

    Hello,
    I'm from Bulgaria and i have very slow internet connection.
    So it is imposible to download any file > 10MB.
    What can i do ? Is there any ftp server from where i can resume my downloads?
    Thanks
    Best regards,
    Atanas Oreshkov
    So that we may better diagnose DOWNLOAD problems, please provide the following information.
    - Server name
    - Filename
    - Date/Time
    - Browser + Version
    - O/S + Version
    - Error Msg

    It should also show in purchases that you have downloaded it.   That means you can download it again as you already own it, for free.

  • WRT54G - Slow wireless connection

    Hi,
    I installed WRT54G router last week for my wireless connection. Right form the very first day, i have been seeing slow/sporadic connection speeds. I also upgraded my firmware version (8.2) & it doesn't help. I have given the output of IPCONFIG /ALL for your reference. Please guide me if you find anything odd.
    Windows IP Configuration
            Host Name . . . . . . . . . . . . : venki
            Primary Dns Suffix  . . . . . . . :
            Node Type . . . . . . . . . . . . : Hybrid
            IP Routing Enabled. . . . . . . . : No
            WINS Proxy Enabled. . . . . . . . : No
            DNS Suffix Search List. . . . . . : hsd1.ct.comcast.net.
    Ethernet adapter Local Area Connection:
            Media State . . . . . . . . . . . : Media disconnected
            Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC
            Physical Address. . . . . . . . . : 00-0A-E4-D5-26-CA
    Ethernet adapter Wireless Network Connection:
            Connection-specific DNS Suffix  . : hsd1.ct.comcast.net.
            Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection
            Physical Address. . . . . . . . . : 00-12-F0-D0-2B-5F
            Dhcp Enabled. . . . . . . . . . . : Yes
            Autoconfiguration Enabled . . . . : Yes
            IP Address. . . . . . . . . . . . : 192.168.1.101
            Subnet Mask . . . . . . . . . . . : 255.255.255.0
            Default Gateway . . . . . . . . . : 192.168.1.1
            DHCP Server . . . . . . . . . . . : 192.168.1.1
            DNS Servers . . . . . . . . . . . : 68.87.71.226
                                                68.87.73.242
            Lease Obtained. . . . . . . . . . : Thursday, July 17, 2008 11:49:44 AM
            Lease Expires . . . . . . . . . . : Friday, July 18, 2008 11:49:44 AM

    Not sure if you performed this or not, once you do a factory reset, immediately after that you are suppose to perform a factory reset by holding is the reset button in on the back of the linksys router for 30 seconds, then wait about 2-3 minutes for the router to sync back up.
    Important = Write down your previous settings in the router as they will be erased and you will have to manually input the info.
    Hope that this will help,
    Ttech
    If not, try this
    Here are some steps to follow for a slow or poor connection.
    1.      Give your network a unique SSID and do not use Linksys and set your SSID Broadcast to enable.
    2.      You can also try A different channel. There are 11 channels and  1, 6 or 11 is better
    3.      You can try raising your router approximately 4-6 feet above the floor and make sure the antennas are vertical.
    4.      access your wireless software by going to your Profile or preferred networks, if any are named Linksys or ones that you do not know please delete them. Go to the settings or properties and check the information to make sure it is correct.
    5.      See if there are any updated drivers to download.
    6.      Try to use WPA encryption if you can
    *** As always upgrade to the latest firmware
    Good luck,
    Ttech

  • Slow RDP Connections

    I have a Server 2008 with 8 desktops in an office. No LAN issues connecting to the server. No performance issues. Only some complaints with slow internet connections.
    2 separate locations use terminal services to connect to the server. Both locations have slow refresh rates perhaps? Performance seems slow.
    Speedtest.net
    #1: D-18.29 Mbps U-.5Mbps
    #2: D-27.5Mbps U-.43Mbps
    Speakeasy:
    #1: D-31.52 Mbps U-4.27Mbps
    Xfinity:
    #1: D-31.9 Mbps U-6.01Mbps
    All pings were below 30ms. Not sure what else to test or what the issue is.

    Hi,
    Thank you for your posting in Windows Server Forum.
    Does this issue happens for initial connection or for all RDP connections?
    What happen if you make RDP connection within same location? Have you find the same slow RDP connections issue over there?
    If you don’t find issue within same location then the cause is usually network related. 
    - Also for a test try to disable all the redirections (Driver, Printers, video, Clipboard, etc.) and check the result. 
    - Disable IPv6 in NIC setting. - Try to disable chimney, task offload and RSS by following command and then check the result.
    NETSH INT TCP SET GLOBAL CHIMNEY=DISABLED
    NETSH INT IP SET GLOBAL TASKOFFLOAD=DISABLED
    NETSH INT TCP SET GLOBAL RSS=DISABLED
    In addition to above try to edit the .RDP file and add the following line.
    enablecredsspsupport:i:0
    Hope it helps! 
    Thanks.
    Dharmesh Solanki

  • Thunderport to ethernet slow internet connection

    Hello,
    I just bought a Thunderbolt to Gigabit Ethernet connection cable for my MBA Mid 2012 and I'm experiencing slow internet connection.  I have TWC 50mbs service and routinely test at around 55mbs on Speedtest.net.  I just plugged in the Thunderbolt to Gigabit Ethernet cable and now it's down to a trickle at around 1-2mbs down and up.  Ping times are good, just the throughput is slow.
    Is this normal? Thanks!

    Thank you both for your quick help! I figured out it was my Network setting, I had to set it to manual and to 1000baseT or something like that with full duplex.  Now I am getting full throughput.  I think for some reason, the "Automatic" setting wasn't working with my Switch (DLink Gigabit 8 port switch).  When I went to manual, it worked.
    Your response clicked in my head to check the hardware not focus on the internet speed.  Thanks!

  • Stealth mode attempts slowing adsl connection or killing it!

    G'day,
    I found this topic in another thread somewhere in here, but for some reason it was closed down. :confused:
    For the last two weeks I have found in the Console log that I have been getting stealth mode and UDP communications attackes when I hook my P/Book up to my wireless network via A/port Express which is linked to my A/port Extreme Base Station. I have set up the Firewall to detect stealth mode attacks, block UDP communications etc., and when I get these attacks it is either drastically slowing my net connection down or causing me to lose connection altogether.
    What can I do to stop these attacks from killing my ADSL connection?
    I haven't installed any secuirity updates as I'm very wary of them killing my Macs, as they have done in the past.
    This situation is really pinging me off big time and if anyone could help out I'd be really greatful.
    Thanks in advance for your help.

    http://discussions.apple.com/thread.jspa?messageID=12592096#12592096

  • Unbearably slow Internet connection using WDS network

    We have an old Airport Extreme (saucer, 802.11b/g) and an Airport Express (802.11n, b/g compatible). We're using the Extreme as a WDS main, and the Express as WDS relay. Wireless devices that connect to the Internet in our house include a MacBook Pro, a couple of iPhones, an iPod Touch, an XBox 360, and a PS3.
    None of these wireless devices are in direct line of sight to the main base station. Typically, our connection to the Internet is decent for the XBox, which has almost a clear line of sight to the relay (Express) base station. On the other hand, the connection for the MacBook Pro, iPhones, and iPod, is extremely slow. Maybe the actual connection speeds are the same for all devices, but at least for the XBox online gaming works. (Haven't tried online gaming with the PS3 yet.)
    The problem that compelled me to post this thread is the slow Internet connection to our MacBook. When our MacBook Pro is moved from its usual location to a place just a few feet away from the Extreme, download speeds are satisfactory (e.g. 10,000+ kbps measured using Speakeasy.net). However, when we sit farther away from the Extreme and are only a few feet from the Express, download speeds are dismal (200-300 kbps). The Internet connection is noticeably slow; web pages load like molasses, and watching streaming video is almost impossible. Upload speeds are usually about 7-10x faster, which is kind of strange.
    Airtunes is off. We've tried setting up the Express base station as a WDS remote instead of relay, no difference. Allow wireless clients is turned on for both main and relay. Channel 1, WPA2 personal security.
    Part of the problem may be due to the fact that our house is steel framed so, depending on location, the frame of the house may get in the way of our wireless network. But even if the MacBook is within 2 feet of the Express with NO walls or obstacles in between, the speed remains dismal. The line of sight from the Extreme (main) to the Express (relay) is impeded by a few obstacles but little in the way of walls.
    However, if the MacBook is close to the Extreme, with good speeds, then I walk away and sit near the Express, I still get good download speeds. This lasts only a short time. Also, if I turn off Airport on my MacBook Pro and turn it back on again, speeds are back down right away.
    I understand WDS cuts the bandwidth down substantially, so I decided to unplug the Express and just use the Extreme station, set to create a wireless network instead of participate as main in a WDS network. When I do this I get satisfactory speeds on the MacBook Pro, even sitting at a location where I used to get the slow speeds.
    So at first I thought forgetting about WDS completely would seem to be the solution to the problem. That seems to be true for the MacBook, but when the Express is offline and the Extreme is the only base station, the XBox and PS3 now are the devices with a very poor connection to the Internet, as there are 3+ steel framed walls between the base station and the devices. When the WDS network is up, the XBox and PS3 are almost in direct line of sight to the relay station (but then I lose speed on the MacBook and other devices.)
    I'm trying to find a solution that allows a good speed connection for all these devices. Right now I have to choose between a regular network with a good connection for my MacBook, or a WDS network that allows gaming but appears to be worthless for the MacBook.
    Your assistance is most welcome.

    I'm trying to find a solution that allows a good speed connection for all these devices.
    The solution is to run an Ethernet cable from the LAN port on the AirPort Extreme base station (AEBS) to the AirPort Express (AX). Then you won't need to use WDS and you won't suffer the bandwidth penalty of WDS. Then you would configure both the AEBS and AX to create a wireless network using the same SSID (network name) and wireless encryption type/level/password. The AX should be configured to act as a bridge (not sharing a single IP address).

  • Iphone 5 slow data connection on AT&T

    My iphone 5 says LTE but the data connection is really slow.  My daugter's iphone 4s on 4G was surfing the net faster than my LTE.  I have ATT.  Has anyone notice slow data connection since iOS6.1? 

    I've seen this from time to time. I'm assuming the LTE network is not 100% stable right now. If it's problematic, turn off LTE and use the HSPA+ network. Report the problem to AT&T.

  • I NEED YOUR HELP GUYS!! I WAS DOWNLOADING OSX LION WHEN MY NET CONNECTION STOPPED. THE ICON DISAPPEARED AND IT WILL TAKE 48HOURS FOR THE INTERNET CONNECTION TO BE RESTORED. WHAT SHOULD I DO? PLEASE HELP ME. IM NOT TECHIE AT ALL SO PLEASE.. PLEASE HELP ME.

    The internet was working fine til 10:31am philippine time. Was downloading OSX Lion, at that time it was somewhere half. Then all of a sudden internet failed and lost connection. Called my ISP immediately and was told it would take 24-48hours for the service to be restored. THen after ending the call the OSx Lion icon disappeared. I dont know what to do. Im not techie at all. Please guys. HELP ME>

    Hey allan. I dont know. Nothing seems to change. I still dont have net connection. Im at a net shop right now. (Not using mac.)  What will happen to the OSX Lion that I payed for? The icon was gone. Im still in the middle of downloading it.

  • Regarding Reliance net connect ZTE AC 2738

    Regarding Reliance net connect ZTE AC 2738
    Dear I am unable to install all the drivers on Win 7; Its shwing error log Also when I am going to connect it again & again its showing please insert in another port while I tried for aal the port.
    Please Suggest

    You need to contact Reliance Technical Support for assistance:
    http://www.reliancenetconnect.co.in/
    This is not a Microsoft product and the manufacturer/vendor has sole responsibility for support of their products.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Maybe you are looking for

  • Keyboard stop working

    mi keybord isn't working on itunes in any other aplication is working fine but on itunes i can't use any key arrows, space, hitting a key is ussles any ideas??? Thanks

  • How to display images in a simple or alv report

    Dear gurus , i want to create a classical or ALV Report showing material codes(mara-matnr) and their respective images . how can i achieve it means where i will store the images and how i will fetch it in the report .Plz send any sample code for this

  • What is the font used at the end of the movie trailer, Blockbuster

    Can anyone tell me the name of the FONT used in the I Movie Trailer called Block Buster? I think the opening font says ROADTRIP Thanks so much! A

  • Hi experts, issue regarding badi MRM_WT_SPLIT_UPDATE

    Actually this badi dont have the option of multiple use, and it is already implemented, but they is no document for which purpose it is implemented. Now the issue is i have to use the same badi . How can i use this badi again thank you

  • Hero article not visible

    Okay, I have another issue. I'm using CC2014 and this Tutorial... How to make and style a web page in Dreamweaver | Adobe Dreamweaver CC tutorials ...is based on a previous version, so some things aren't where they're supposed to be.  I fixed my foot