Slow Network Access After Update to 10.5.4
Hello all. i updated my macbook from 10.5.3 to 10.5.4 some time ago and as soon as i did that, all my network shares take several seconds to connect now. each time i connect to them takes a pretty long time. i am now on 10.5.5 and this is still occuring. it was VERY snappy in 10.5.3, almost no time to connect to a share, specifically a windows smb server. the server runs fine from other computers and no errors are logged on either the server or the macbook. the macbook does connect and once connected it is pretty fast moving around in folders and copying but the initial connection is just so slow since this update. i cant find any info regarding this particular issue anywhere. any suggestions? thank you!
thank you for the suggestion. it ended up that i had vmware fusion 2.0 on my system and the extra virutal nics, vmnet1 and vmnet8 were causing it. i commented out all their entries in the locations file and rebooted. it works normally now.
Similar Messages
-
What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.
-
My wifi connection shows limited access after updating my window 8.1
Hy wishes for all of you. Having trouble after update my window 8 to 8.1. Perhaps the wrost day of my life. After update lost my Internet connection. It's shows limited connection and unindentify network. I search different post on Web regarding this problem and applied but all in vain. I would like to restore my old window but I don't have backup so now have true in trouble kindly help me out
Would be thankful to all of you
RegardsHi:
If you live in the USA, you can order recovery media by clicking on the link below, select the W8 operating system, click on Order Recovery Media.
http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-envy-m6-1100-notebook-pc-series/5296045/model...
Did you try this W8.1 wireless card driver?
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142231_1#tab1 -
System has slowed down considerably after updates from Apple. Is SyncServer the culprit?
I use MacBook with preinstalled OS Leopard since April 2009. I have also regulalry updated my computer system using the Software Update application. However, since my last update on 12th Aug 2011, I have noticed that my system has slowed down. There is long pause between every character I type, delay in switching applications, battery dries out quicker, slow response to every command.
I have started facing this problem after updating following software like iTunes 10.4, Safari 5.0.6, Migration Assistant Update for MAC OS Leopard & Quick Time 7.7 from Software Updater. Although, my OS is still leopard.
I noticed on the Activity Monitor that syncserver is using majority of my RAM and reappers even if I stop the process. Some of its subprocess like AddressBookSync also appears and consumes lot of memory. Is this the problem? Though, I never noticed earlier what size it consumed.
I use Microsoft Office suite for Mac and have also checked and deselected all sync services. Yet, the Process (PID 305) continues to appear in Activity Monitor.
I am no techie, and would appreciate quick help to resolve this issue.
Thanks!I was just about to write the same problem, but I don't have VMware; my laptop is late 2008 was running Snow Leopard (uptodate version).
I've scientific softwares so probably would require a clean re-installation of ML. I MUST MENTION HERE that those software which were written for PPC will NOT work on ML. Just found out that one of my important softwares version won't work on ML; need $500 to upgrade that software .
Therefore, I'd also want to know how can I go back to SL.
I'll let you know how clean re-installation has worked. -
Keypad is slow when typing after update?
why is it that after updating my phone to ios7 my keypad is incredibly slow when recognising touch and showing the typed words?
I was wondering if anyone else has had the same problem after updating their phone/ipod too and if there is any way to fix it.
its incredibly frustrating as I have to wait around 10 seconds before a sentence is typed up fully (its completely unresponsive then suddenly the whole thing appears) and if I need to add a number, comma, questionmark, etc it can take forever before I am able to do so. None of my friends who have updated have had the same problem but then they all have the iphone 5 (I have the iphone4)
any advise is extremely appriciated, thanks very much!Although it has not happened to me, there are two solutions that seem to work to other people
1.- Go to Settings > General > Reset > Reset All Settings
2.- Go to Settings > iCloud > turn off Documents and Data
Hope that helps -
Very slow and unstable after update...
Hello!
After update yesterday, my Arch64 was very slow and unstable... Eclipse IDE crashes, Firefox uses +200mb and Xorg uses +15% of CPU. Xorg lags when I'm going to switch between virtual desktop in KDE... very strange!
Some confs below:
[root@Selene hlegius]# uname -a
Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64 Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz GenuineIntel GNU/Linux
[root@Selene hlegius]# free -m
total used free shared buffers cached
Mem: 3947 1121 2826 0 30 466
-/+ buffers/cache: 624 3322
Swap: 0 0 0
[root@Selene hlegius]# kde-config -v
Qt: 3.3.8b
KDE: 3.5.9
kde-config: 1.0
[root@Selene hlegius]# X -version
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH x86_64
Current Operating System: Linux Selene 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 17:44:19 CEST 2008 x86_64
Build Date: 21 June 2008 11:53:34AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Any ideas ?Rexilion wrote:
I misread that the in kernel driver of v3.12 was working properly. THat way you can figure out what exact change broke performance by testing different development kernels.
There is an in-kernel driver in staging called rtl8192u. It received a lot of changes in v3.12. Maybe try v3.11 and see if that works?
it didnt work in kernel 3.12, but with https://aur.archlinux.org/packages/dkms-8192cu/ it worked perfect
in kernel 3.13 it is horrible both witht he stock driver or with the AUR package. -
Network conflicts after updating BB Desktop Software from v.5.0 to v5.0.1
Hi,
After updating the Blackberry Desktop Software from v5.0.0 to v5.0.1. Using the automatic updating tool, my computer starts loosing connection to the network every 1 hour. I'm using Windows XP.
My company's technical assistance can only resolve the the problem by reinstalling the PC, but when I reinstall the software it happens again.
Can anyone help me?
CatarinaDoing some more troubleshooting after my post above as I saw a couple of entries referencing Stop Light keep popping up in the log of the Console. I removed Stoplight and Cocoa Gesture (for good meausre) and RDC 2.0.1 started working. I think it is Stop Light which causes RDC stop working, but I don't have to time right now to put Cocoa Gesture back to confirm that. I might if I have the time or post here if you have Stop Light installed as well and removing it resolved the RDC issue for you.
-
Do I need to network unlock after updating to iOS 6?
Some people sat that after updating to ios6 they can't connect wifi. Do I need to network unlock my iPod touch? Is it needed? And tell me something about speakers and earphone after updating?
I do not understand your question. Please rephrase it. If English is not your first or native language, please ask your question in your native language so some one can assist you.
-
No network/signal after update to 4.4.4
Hi guys, I updated my Xperia z3 to 4.4.4, straight after the update my phone wouldn't connect to the network. It flickers onto signal for pretty much a millisecond everyone and then, but that's all I get. Doesn't even stay on long enough to 'search for a network' in the settings. All I get is zero bars with a red cross and 'no service'
The sim card had never been removed prior to the issue starting and was the original one that came from virginity mobile Australia - nano sim.
i have tried;
-airplane mode on/off
-restart
-reset
-re-install update via PC companion
-add new APN as per my providers specs (3g and 4g APN)
same thing happens.
my sim card works 100% in other phones perfectly, so im having to use my old galaxy s4 as a temporary solution until i sort this out.
is there any way of reinstalling older versions of the software? or has my phone managed to fry itself after the update due to software and needs to be sent back to be repaired?
I'll be calling Sony up on Monday to see about repair, as it was only purchased in November, and there is no option for online repair booking in australia, but if anyone has any other ideas, or has experienced the same and knows a solution It would be greatly appreciated.
thanks in advance,
JimmyHi
I have the exact same problem (you can see my post here: https://talk.sonymobile.com/t5/Xperia-Z3-Z3-Dual/23-0-1-a-5-77/td-p/902462/page/4
I updated to 4.4.4 and more specifically it happened right after update 23.0.1.A.5.77.
The signal flickered a few times right after the update and have since been gone from the 23rd of december (which I strongly regret as I didnt have any connection for the whole holidays. Horray for nanosim!).
Did you APN settings get erased after the update? Mine disappeared after the update and I had to manually put in new ones after getting them from my phone company in norway. Still doesnt help me get any signal though.
I have tried everything, on/off, flightmode on/off, turing off wifi/stamina/all other programs, resetting on phone, repair via PC-companion, putting in different types of APN-settings, swapping out simcard to another phone.
As far as I can see it, the update broke my phone. Im just going to turn it in to the retailer I bought it from in october and make them repair it. -
Airport Express Network Gone after Updating to 10.4.9
Everything worked fine for a few days after updating the OS to 10.4.9. Now, the home network I set up that has worked and been stable for months is just plain missing from the list of available networks. Any ideas or solutions? Thanks!
This was about the simplest solution ever. I went over to MacFixit.com and looked up this problem. There was a range of solutions, the simplest of which was to simply unplug the AirPort Express and plug it back in after 30 seconds. I did that, and all the email from the past three days was streaming in before I even got back to the computer. Back to normal, thanks to MacFixit!
-
Slow internet access after Mavericks upgrade
I have been experiencing very slow internet access since I upgraded to Maverics OS.
The Wifi connection is unstable. Sometimes it looses connection. I did not have this problem before.
Is this a problem experienced by others? Do you have any steps on how you got this resolved?what is the model of your wireless adapter?
-
Problems with network access after applying batch of updates
Hi all,
Yesterday, I've applied a batch of updates to my Windows Server 2012 Hyper-V server. All went good, but after the reboot I was not able to access... Microsoft website for update download, or WSUS to Report and detect updates.
For my troubleshooting I did:
ping www.microsoft.com (DNS goes well)
With Wireshark running, did a http request to www.microsoft.com and I don't see any request leaving the NIC. This goes to *.microsoft.com
This happens either with or without Proxy set up.
I've reset Internet Explorer Settings, all with no luck.
When trying over our WSUS, I get error 80244019, and with wireshark I can see that WSUS may not be able to get the updates because it is replying with 404 not found.
HEAD /Content/C5/EC7E6D6C8063BF4424CE2EC75EBC977953CF11C5.cab HTTP/1.1
Connection: Keep-Alive
Accept: */*
Accept-Encoding: identity
User-Agent: Microsoft BITS/7.6
Host: srv-dc-sys:8530
HTTP/1.1 404 Not Found
Content-Length: 1245
Content-Type: text/html
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
Date: Wed, 14 Jan 2015 10:34:49 GMT
HEAD /Content/C5/EC7E6D6C8063BF4424CE2EC75EBC977953CF11C5.cab HTTP/1.1
Connection: Keep-Alive
Accept: */*
Accept-Encoding: identity
User-Agent: Microsoft BITS/7.6
Host: srv-dc-sys:8530
HTTP/1.1 404 Not Found
Content-Length: 1245
Content-Type: text/html
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
Date: Wed, 14 Jan 2015 10:34:49 GMT
HEAD /Content/C5/EC7E6D6C8063BF4424CE2EC75EBC977953CF11C5.cab HTTP/1.1
Connection: Keep-Alive
Accept: */*
Accept-Encoding: identity
User-Agent: Microsoft BITS/7.6
Host: srv-dc-sys:8530
HTTP/1.1 404 Not Found
Content-Length: 1245
Content-Type: text/html
Server: Microsoft-IIS/8.0
X-Powered-By: ASP.NET
Date: Wed, 14 Jan 2015 10:34:49 GMT
Seems to me two issues here. One I might workaround with deleting the WSUS content, and let WSUS resync(may solve).
The other... It's strange because can't seem to have www.microsoft.com leave my nic...
As part of the troubleshooting, I have two nics teamed, 1 nic for live migration, 1 nic for cluster network, and teaming, obviously has itself a single default gateway.
What can I do to go forward?
PS: One last finding. In WSUS this server does not report since 13th January at 11:00 a.m. I've forced it to report, and still no update/report
Nuno SilvaHi Nuno,
Do you mean that you can't see a HTTP request of
www.microsoft.com when you access it with Internet Explorer?
Can you successfully access the www.microsoft.com with the Internet Explorer? If yes, it should be normal. Because
www.microsoft.com is a CNAME.
>>but after the reboot I was not able to access... Microsoft website for update download, or WSUS to Report and detect updates.
Please try to update from Microsoft Update. Then post the windowsupdate.log here. It may give some hints.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Network problems after update; system reinstall not fixing it.
Hello, first post here ^^
Sorry if I write with a bit of engrish. I'm very tired ^^"
My brother's laptop, a Portuguese Classmate PC (aka "Magalhães", version MG2 -- unfortunately, I can't find the corresponding international version, but have a picture) doesn't has any network at all, be it wired or wireless, with the updates of 3/August/2011 installed. I think the problem is udev.
I have no problems when using an installation media, at least for wired network.
Even after reinstalling, I still have no network.
Wired
The problem with wired, is that the eth0 interface is gone. Have tried network and NetworkManager, and it's just gone. In the output of ifconfig I only have the loopback interface (and would have wlan0, if I had the firmware for the wireless card installed).
Wired problem solved! Sorry, I actually searched the Internet for a solution and couldn't find anything useful, and only now noticed there's already a thread here about it. I should have searched this forum, instead of the Internet... sorry!
Wireless
Previously, I only had to install the rtl8192se chipset drivers from AUR.
But now, with the latest updates, the kernel [size=1](or the udev, I don't know which it is)[/size]was constantly giving me errors through tty, regarding to wifi. It could scan for networks, but not connect. I have tried with WPA and no security, result was the same.
Config files and logs
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pt_PT.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Lisbon"
KEYMAP="pt-latin1 pt-latin9 euro"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(mii r8169 pcspkr snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="MTomas"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(syslog-ng dbus network netfs @openntpd crond cups alsa gdm)
hwdetect --show-net
NET : ppp_generic slhc rfkill
dmesg (sorry about the very long output, I don't really know whats' useful or not...)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5c0000 (usable)
[ 0.000000] BIOS-e820: 000000003f5c0000 - 000000003f5cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5cc000 - 000000003f5cf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5cf000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS BPPNV20L.90A.0008.2010.0909.1822 09/09/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f5c0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7d40] f7d40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f5c0000
[ 0.000000] 0000000000 - 003f400000 page 2M
[ 0.000000] 003f400000 - 003f5c0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f5c0000 @ 3f5bd000-3f5c0000
[ 0.000000] RAMDISK: 37c12000 - 37e01000
[ 0.000000] ACPI: RSDP 00000000000f7d10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f5c5013 00074 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f5cbc60 000F4 (v03 INTEL 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f5c61a9 05A43 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f5cefc0 00040
[ 0.000000] ACPI: TCPA 000000003f5cbd54 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: MCFG 000000003f5cbd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f5cbdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000003f5cbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f5cbe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003f5cbe8a 00176 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 000000003f5c5609 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5563 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5087 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f5c0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f5c0000
[ 0.000000] NODE_DATA [000000003f5b8000 - 000000003f5bcfff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f5c0
[ 0.000000] On node 0 totalpages: 259405
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3493 pages used for memmap
[ 0.000000] DMA32 zone: 251931 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255851
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1011404k/1038080k available (4019k kernel code, 460k absent, 26216k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.531 MHz processor.
[ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.60 BogoMIPS (lpj=5541770)
[ 0.003531] pid_max: default: 32768 minimum: 301
[ 0.003952] Security Framework initialized
[ 0.004047] AppArmor: AppArmor disabled by boot time parameter
[ 0.004419] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007667] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008243] Mount-cache hash table entries: 256
[ 0.009502] Initializing cgroup subsys ns
[ 0.009600] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009736] Initializing cgroup subsys cpuacct
[ 0.009925] Initializing cgroup subsys memory
[ 0.010064] Initializing cgroup subsys devices
[ 0.010158] Initializing cgroup subsys freezer
[ 0.010249] Initializing cgroup subsys net_cls
[ 0.010340] Initializing cgroup subsys blkio
[ 0.010565] CPU: Physical Processor ID: 0
[ 0.010656] CPU: Processor Core ID: 0
[ 0.010743] mce: CPU supports 5 MCE banks
[ 0.010839] CPU0: Thermal monitoring handled by SMI
[ 0.010849] using mwait in idle threads.
[ 0.012451] ACPI: Core revision 20110316
[ 0.023363] ftrace: allocating 15966 entries in 63 pages
[ 0.026783] Setting APIC routing to flat
[ 0.027287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061420] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.063329] APIC calibration not consistent with PM-Timer: 359ms instead of 100ms
[ 0.063329] APIC delta adjusted to PM-Timer: 1039059 (3740601)
[ 0.063329] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.063329] ... version: 3
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.080180] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106732] Booting Node 0, Processors #1 Ok.
[ 0.106880] smpboot cpu 1: start_ip = 98000
[ 0.006666] CPU0: Thermal monitoring enabled (TM1)
[ 0.203381] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.210009] Brought up 2 CPUs
[ 0.210112] Total of 2 processors activated (6652.11 BogoMIPS).
[ 0.210657] devtmpfs: initialized
[ 0.217499] PM: Registering ACPI NVS region at 3f5cc000 (12288 bytes)
[ 0.221762] print_constraints: dummy:
[ 0.222075] NET: Registered protocol family 16
[ 0.222464] ACPI: bus type pci registered
[ 0.222965] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.223102] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.225887] PCI: Using configuration type 1 for base access
[ 0.226974] bio: create slab <bio-0> at 0
[ 0.229126] ACPI: EC: Look up EC in DSDT
[ 0.237091] ACPI: SSDT 000000003f5c5ed2 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.237853] ACPI: Dynamic OEM Table Load:
[ 0.238022] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.238519] ACPI: SSDT 000000003f5c5868 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.239233] ACPI: Dynamic OEM Table Load:
[ 0.239401] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.240151] ACPI: SSDT 000000003f5c60d5 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.240891] ACPI: Dynamic OEM Table Load:
[ 0.241061] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.241466] ACPI: SSDT 000000003f5c5e4d 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.242187] ACPI: Dynamic OEM Table Load:
[ 0.242357] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.243484] ACPI: Interpreter enabled
[ 0.243588] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.243922] ACPI: Using IOAPIC for interrupt routing
[ 0.255265] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.263625] ACPI: No dock devices found.
[ 0.263714] HEST: Table not found.
[ 0.263800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.265505] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.265765] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.266086] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.266668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.270174] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.270276] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.270400] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.270524] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.270647] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.270772] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.270898] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
[ 0.271021] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
[ 0.271118] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.271263] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.271320] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.271335] pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
[ 0.271346] pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
[ 0.271356] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.271366] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
[ 0.271410] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.271424] pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
[ 0.271531] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.271559] pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.271649] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271659] pci 0000:00:1b.0: PME# disabled
[ 0.271694] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.271793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271802] pci 0000:00:1c.0: PME# disabled
[ 0.271842] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.271935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.271944] pci 0000:00:1c.1: PME# disabled
[ 0.271983] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.272082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.272091] pci 0000:00:1c.2: PME# disabled
[ 0.272136] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.272197] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.272257] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.272338] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.272398] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.272459] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.272511] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.272596] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.272670] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.272701] pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
[ 0.272808] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.272817] pci 0000:00:1d.7: PME# disabled
[ 0.272848] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.272944] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.273056] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.273215] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.273244] pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
[ 0.273259] pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
[ 0.273274] pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
[ 0.273289] pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
[ 0.273304] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
[ 0.273334] pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
[ 0.273383] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273391] pci 0000:00:1f.2: PME# disabled
[ 0.273418] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.273494] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.273613] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.273709] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.273718] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.273730] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.273884] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.273955] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.274076] pci 0000:03:00.0: reg 18: [mem 0xf0520000-0xf0520fff 64bit pref]
[ 0.274148] pci 0000:03:00.0: reg 20: [mem 0xf0510000-0xf051ffff 64bit pref]
[ 0.274199] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.274363] pci 0000:03:00.0: supports D1 D2
[ 0.274368] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274387] pci 0000:03:00.0: PME# disabled
[ 0.274568] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.274663] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.274672] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.274685] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.274782] pci 0000:04:00.0: [10ec:8172] type 0 class 0x000280
[ 0.274812] pci 0000:04:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.274832] pci 0000:04:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
[ 0.274954] pci 0000:04:00.0: supports D1 D2
[ 0.274960] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274970] pci 0000:04:00.0: PME# disabled
[ 0.280025] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.280144] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.280152] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.280164] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280266] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
[ 0.280369] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.280378] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.280390] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.280404] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.280411] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.280417] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.280424] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.280431] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.280438] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[ 0.280445] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.280451] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.280490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.280757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.280849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.280941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.281235] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.281497] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.281828] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.282049] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.282310] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.282632] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.297275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.297984] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.298679] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.299375] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.300108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.300923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.301740] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.302444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.303298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303339] vgaarb: loaded
[ 0.303656] PCI: Using ACPI for IRQ routing
[ 0.303746] PCI: pci_cache_line_size set to 64 bytes
[ 0.303778] pci 0000:00:1b.0: address space collision: [mem 0xf0500000-0xf0503fff 64bit] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.303990] pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304159] pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304389] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.304395] reserve RAM buffer: 000000003f5c0000 - 000000003fffffff
[ 0.304709] NetLabel: Initializing
[ 0.304793] NetLabel: domain hash size = 128
[ 0.304878] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.304991] NetLabel: unlabeled traffic allowed by default
[ 0.305112] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.305216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.305468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.316700] Switching to clocksource hpet
[ 0.319651] Switched to NOHz mode on CPU #0
[ 0.319806] Switched to NOHz mode on CPU #1
[ 0.333572] pnp: PnP ACPI init
[ 0.333697] ACPI: bus type pnp registered
[ 0.335270] pnp 00:00: [bus 00-3f]
[ 0.335277] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.335283] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.335289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.335295] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.335301] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.335307] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.335312] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.335318] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.335324] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.335329] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.335335] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.335341] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.335346] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.335352] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.335358] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.335363] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.335369] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.335375] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.335381] pnp 00:00: [mem 0x00000000 window]
[ 0.335386] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.335514] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.335756] pnp 00:01: [io 0x0010-0x001f]
[ 0.335763] pnp 00:01: [io 0x0024-0x0025]
[ 0.335768] pnp 00:01: [io 0x0028-0x0029]
[ 0.335773] pnp 00:01: [io 0x002c-0x002d]
[ 0.335778] pnp 00:01: [io 0x0030-0x0031]
[ 0.335783] pnp 00:01: [io 0x0034-0x0035]
[ 0.335788] pnp 00:01: [io 0x0038-0x0039]
[ 0.335793] pnp 00:01: [io 0x003c-0x003d]
[ 0.335798] pnp 00:01: [io 0x0072-0x0077]
[ 0.335803] pnp 00:01: [io 0x0080]
[ 0.335808] pnp 00:01: [io 0x0090-0x009f]
[ 0.335813] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.335818] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.335823] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.335827] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.335832] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.335837] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.335842] pnp 00:01: [io 0x0800-0x080f]
[ 0.335848] pnp 00:01: [io 0x1000-0x107f]
[ 0.335853] pnp 00:01: [io 0x1180-0x11bf]
[ 0.335858] pnp 00:01: [io 0x002e-0x002f]
[ 0.335869] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.335874] pnp 00:01: [io 0xfe00]
[ 0.335879] pnp 00:01: [io 0x0068-0x0077]
[ 0.335884] pnp 00:01: [io 0x0200-0x020f]
[ 0.335889] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.335895] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.335900] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.335906] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.336082] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.336183] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.336278] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.336373] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.336468] system 00:01: [io 0xfe00] has been reserved
[ 0.336560] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.336656] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.336798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.336897] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.336996] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.337098] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337130] pnp 00:02: [io 0x0000-0x000f]
[ 0.337136] pnp 00:02: [io 0x0081-0x008f]
[ 0.337141] pnp 00:02: [io 0x00c0-0x00df]
[ 0.337147] pnp 00:02: [dma 4]
[ 0.337215] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337242] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.337263] pnp 00:03: [irq 13]
[ 0.337336] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.337431] pnp 00:04: [io 0x0070-0x0071]
[ 0.337445] pnp 00:04: [irq 8]
[ 0.337513] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.338017] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.338032] pnp 00:05: [irq 4]
[ 0.338239] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.338320] pnp 00:06: [io 0x0061]
[ 0.338392] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.338454] pnp 00:07: [mem 0xfed40000-0xfed44fff]
[ 0.338534] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.338562] pnp 00:08: [io 0x0060]
[ 0.338567] pnp 00:08: [io 0x0064]
[ 0.338581] pnp 00:08: [irq 1]
[ 0.338653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.338686] pnp 00:09: [irq 12]
[ 0.338759] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.339063] pnp 00:0a: [mem 0xff800000-0xffffffff]
[ 0.339151] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.339574] pnp: PnP ACPI: found 11 devices
[ 0.339666] ACPI: ACPI bus type pnp unregistered
[ 0.349216] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40000000-0x400fffff]
[ 0.349328] pci 0000:00:1b.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit]
[ 0.349464] pci 0000:00:1b.0: BAR 0: set to [mem 0x40100000-0x40103fff 64bit] (PCI address [0x40100000-0x40103fff])
[ 0.349606] pci 0000:00:1d.7: BAR 0: assigned [mem 0x40104000-0x401043ff]
[ 0.349710] pci 0000:00:1d.7: BAR 0: set to [mem 0x40104000-0x401043ff] (PCI address [0x40104000-0x401043ff])
[ 0.349849] pci 0000:00:1f.2: BAR 5: assigned [mem 0x40104400-0x401047ff]
[ 0.349950] pci 0000:00:1f.2: BAR 5: set to [mem 0x40104400-0x401047ff] (PCI address [0x40104400-0x401047ff])
[ 0.350115] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.350248] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.350352] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.350483] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.350580] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.350673] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.350773] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.350874] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.351009] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
[ 0.351133] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.351225] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.351324] pci 0000:00:1c.1: bridge window [mem 0x40000000-0x400fffff]
[ 0.351425] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.351558] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.351649] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.351749] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.351850] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.351981] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[ 0.352070] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.352164] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.352258] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.352370] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.352482] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.352586] pci 0000:00:1c.0: setting latency timer to 64
[ 0.352607] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.352709] pci 0000:00:1c.1: setting latency timer to 64
[ 0.352728] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.352830] pci 0000:00:1c.2: setting latency timer to 64
[ 0.352844] pci 0000:00:1e.0: setting latency timer to 64
[ 0.352853] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.352859] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352865] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352871] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352877] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352883] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.352890] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.352896] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.352902] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.352908] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.352914] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
[ 0.352921] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.352927] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.352933] pci_bus 0000:03: resource 1 [mem 0x40000000-0x400fffff]
[ 0.352940] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.352946] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.352952] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.352959] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.352966] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.352972] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352978] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352984] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352990] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352996] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.353002] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.353009] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.353015] pci_bus 0000:11: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.353230] NET: Registered protocol family 2
[ 0.353666] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.354759] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.356562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.357461] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.357565] TCP reno registered
[ 0.357677] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.357790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.358526] NET: Registered protocol family 1
[ 0.358655] pci 0000:00:02.0: Boot video device
[ 0.358843] PCI: CLS 32 bytes, default 64
[ 0.358970] Unpacking initramfs...
[ 0.422600] Freeing initrd memory: 1980k freed
[ 0.424221] Simple Boot Flag at 0x36 set to 0x1
[ 0.425202] audit: initializing netlink socket (disabled)
[ 0.425328] type=2000 audit(1312465475.423:1): initialized
[ 0.426137] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431274] VFS: Disk quotas dquot_6.5.2
[ 0.431768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432308] msgmni has been set to 1979
[ 0.433016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.433243] io scheduler noop registered
[ 0.433398] io scheduler deadline registered
[ 0.433626] io scheduler cfq registered (default)
[ 0.433955] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.434029] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.434158] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.434222] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.434347] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.434410] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.434777] intel_idle: MWAIT substates: 0x20220
[ 0.434799] intel_idle: v0.4 model 0x1C
[ 0.434803] intel_idle: lapic_timer_reliable_states 0x2
[ 0.434847] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.435010] ERST: Table is not found!
[ 0.435250] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.456560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.674724] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.727052] Linux agpgart interface v0.103
[ 0.727338] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.731303] i8042: Detected active multiplexing controller, rev 1.1
[ 0.734370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.734541] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.734705] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.734863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.735024] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.735354] mousedev: PS/2 mouse device common for all mice
[ 0.753576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.753717] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.753983] cpuidle: using governor ladder
[ 0.754335] cpuidle: using governor menu
[ 0.754959] TCP cubic registered
[ 0.755047] NET: Registered protocol family 17
[ 0.755152] Registering the dns_resolver key type
[ 0.755524] PM: Hibernation image not present or could not be loaded.
[ 0.755541] registered taskstats version 1
[ 0.756395] rtc_cmos 00:04: setting system clock to 2011-08-04 13:44:36 UTC (1312465476)
[ 0.756612] Initializing network drop monitor service
[ 0.760092] Freeing unused kernel memory: 712k freed
[ 0.760552] Write protecting the kernel read-only data: 6144k
[ 0.761521] Freeing unused kernel memory: 60k freed
[ 0.768916] Freeing unused kernel memory: 784k freed
[ 0.773948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.824947] udevd[74]: starting version 173
[ 0.877923] SCSI subsystem initialized
[ 0.935196] libata version 3.00 loaded.
[ 0.956774] ahci 0000:00:1f.2: version 3.0
[ 0.956824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.957043] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.957186] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.957352] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.957485] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.964648] scsi0 : ahci
[ 0.965831] scsi1 : ahci
[ 0.966239] scsi2 : ahci
[ 0.966607] scsi3 : ahci
[ 0.967366] ata1: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104500 irq 43
[ 0.967524] ata2: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104580 irq 43
[ 0.967680] ata3: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104600 irq 43
[ 0.967831] ata4: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104680 irq 43
[ 1.286817] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.286986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.287140] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.287285] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.296743] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
[ 1.296845] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.306650] ata1.00: configured for UDMA/133
[ 1.307168] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
[ 1.361599] usbcore: registered new interface driver usbfs
[ 1.361788] usbcore: registered new interface driver hub
[ 1.362029] usbcore: registered new device driver usb
[ 1.362890] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.363254] sd 0:0:0:0: [sda] Write Protect is off
[ 1.363390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.363491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.371359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.371567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.371722] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.371734] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.371971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.393443] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.393567] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.397557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.397596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40104000
[ 1.410069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.410565] hub 1-0:1.0: USB hub found
[ 1.410687] hub 1-0:1.0: 8 ports detected
[ 1.418573] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.420139] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.436350] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.436604] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.436925] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.437083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.450137] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.450657] hub 2-0:1.0: USB hub found
[ 1.450776] hub 2-0:1.0: 2 ports detected
[ 1.451206] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.451346] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.451358] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.451506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.466851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.467375] hub 3-0:1.0: USB hub found
[ 1.467491] hub 3-0:1.0: 2 ports detected
[ 1.467949] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.468100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.468111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.468263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.476847] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.477389] hub 4-0:1.0: USB hub found
[ 1.477506] hub 4-0:1.0: 2 ports detected
[ 1.477926] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.478068] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.478080] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.478233] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.486815] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.487337] hub 5-0:1.0: USB hub found
[ 1.487454] hub 5-0:1.0: 2 ports detected
[ 1.720183] usb 1-4: new high speed USB device number 2 using ehci_hcd
[ 2.310090] usb 1-7: new high speed USB device number 3 using ehci_hcd
[ 3.346515] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.346624] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.481722] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 3.481844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572970
[ 3.481970] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572968
[ 3.482041] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 923116
[ 3.482090] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572948
[ 3.482130] EXT4-fs (sda2): 4 orphan inodes deleted
[ 3.482225] EXT4-fs (sda2): recovery complete
[ 4.287281] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.547177] udevd[278]: starting version 173
[ 5.875278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.875984] ACPI: AC Adapter [AC0] (off-line)
[ 5.881017] ACPI: acpi_idle yielding to intel_idle
[ 5.888339] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
[ 5.939985] ACPI: Lid Switch [LID]
[ 5.940983] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
[ 5.941147] ACPI: Power Button [PWRB]
[ 5.941583] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.941763] ACPI: Sleep Button [SLPB]
[ 5.942546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.942697] ACPI: Power Button [PWRF]
[ 5.943413] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.943529] ACPI: Thermal Zone [TZ01] (24 C)
[ 5.972400] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.972588] ACPI: Battery Slot [BAT1] (battery present)
[ 5.995124] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 5.995453] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 5.995846] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 5.999895] iTCO_vendor_support: vendor-support=0
[ 6.012373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 6.124751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.125083] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 6.125348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.190412] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.194157] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 6.215082] Initializing USB Mass Storage driver...
[ 6.215469] usbcore: registered new interface driver usb-storage
[ 6.215586] USB Mass Storage support registered.
[ 6.267697] usb 1-7: USB disconnect, device number 3
[ 6.269402] Linux media interface: v0.10
[ 6.271745] scsi4 : usb-storage 1-7:1.0
[ 6.278594] usbcore: registered new interface driver ums-realtek
[ 6.324583] usbcore: registered new interface driver uas
[ 6.361274] Linux video capture interface: v2.00
[ 6.416800] uvcvideo: Found UVC 1.00 device USB Camera (5986:02a8)
[ 6.435626] input: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
[ 6.435979] usbcore: registered new interface driver uvcvideo
[ 6.436094] USB Video Class driver (v1.0.0)
[ 6.516768] [drm] Initialized drm 1.1.0 20060810
[ 6.632026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.657529] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.657663] i915 0000:00:02.0: setting latency timer to 64
[ 6.729787] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.729799] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.729904] [drm] Driver supports precise vblank timestamp query.
[ 6.805456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.805960] [drm] initialized overlay support
[ 6.965295] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 7.013599] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 7.142190] fbcon: inteldrmfb (fb0) is primary device
[ 7.190534] Console: switching to colour frame buffer device 128x37
[ 7.197352] fb0: inteldrmfb frame buffer device
[ 7.197461] drm: registered panic notifier
[ 7.197660] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
[ 7.198144] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.198602] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 7.199927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.736636] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.833668] EXT3-fs: barriers not enabled
[ 8.856596] kjournald starting. Commit interval 5 seconds
[ 8.859646] EXT3-fs (sda4): using internal journal
[ 8.862624] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 9.026943] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
[ 18.281512] NET: Registered protocol family 10
[ 21.591928] EXT4-fs (sda2): re-mounted. Opts: commit=600
[ 35.750474] fuse init (API version 7.16)
[ 201.029607] PPP generic driver version 2.4.2
[ 3255.955029] EXT4-fs (sda2): re-mounted. Opts: commit=0
[10041.892469] usb 1-1: new high speed USB device number 4 using ehci_hcd
[10042.021338] scsi5 : usb-storage 1-1:1.0
[10043.026686] scsi 5:0:0:0: Direct-Access TOSHIBA MK1234GSX PQ: 0 ANSI: 2
[10043.031863] sd 5:0:0:0: Attached scsi generic sg1 type 0
[10043.036190] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[10043.041825] sd 5:0:0:0: [sdb] Write Protect is off
[10043.045147] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[10043.045157] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.052676] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.064806] sdb: sdb1
[10043.071939] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.075091] sd 5:0:0:0: [sdb] Attached SCSI disk
[10089.898154] EXT3-fs (sdb): error: can't find ext3 filesystem on dev sdb.
[10089.913066] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
[10089.936439] FAT: invalid media value (0xb9)
[10089.939320] VFS: Can't find a valid FAT filesystem on dev sdb.
EDIT: ls -l /etc/modprobe.d
total 16
-rw-r--r-- 1 root root 30 Ago 4 04:57 blacklist_net.conf
-rw-r--r-- 1 root root 182 Ago 4 04:57 blacklist_sound.conf
-rw-r--r-- 1 root root 55 Jun 25 15:30 modprobe.conf
-rw-r--r-- 1 root root 196 Abr 8 11:08 usb-load-ehci-first.conf
Thanks in advance for any help.
Last edited by JohnTH (2011-08-04 16:31:18)The kernel outputs many error messages when I start NetwrokManager, and persists even when I stop it
Here is part of a dmesg:
[ 587.134444] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 587.135365] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 587.136337] HW_VAR_MRC: Turn on 1T1R MRC!
[ 587.553458] pwrdown, 0x6(BIT6)=f1
[ 589.566485] pwrdown, 0x6(BIT6)=f1
[ 591.573163] pwrdown, 0x6(BIT6)=f1
[ 593.579828] pwrdown, 0x6(BIT6)=f1
[ 595.586517] pwrdown, 0x6(BIT6)=f1
[ 597.593183] pwrdown, 0x6(BIT6)=f1
[ 599.599777] pwrdown, 0x6(BIT6)=f1
[ 601.606490] pwrdown, 0x6(BIT6)=f1
[ 603.613185] pwrdown, 0x6(BIT6)=f1
[ 605.619843] pwrdown, 0x6(BIT6)=f1
[ 607.626506] pwrdown, 0x6(BIT6)=f1
[ 609.633150] pwrdown, 0x6(BIT6)=f1
[ 611.639785] pwrdown, 0x6(BIT6)=f1
[ 613.646491] pwrdown, 0x6(BIT6)=f1
[ 615.653171] pwrdown, 0x6(BIT6)=f1
[ 617.659839] pwrdown, 0x6(BIT6)=f1
[ 619.666513] pwrdown, 0x6(BIT6)=f1
[ 621.673175] pwrdown, 0x6(BIT6)=f1
[ 623.679774] pwrdown, 0x6(BIT6)=f1
[ 625.686507] pwrdown, 0x6(BIT6)=f1
[ 627.693176] pwrdown, 0x6(BIT6)=f1
[ 629.699826] pwrdown, 0x6(BIT6)=f1
[ 631.706480] pwrdown, 0x6(BIT6)=f1
[ 633.713169] pwrdown, 0x6(BIT6)=f1
[ 635.719785] pwrdown, 0x6(BIT6)=f1
[ 637.726499] pwrdown, 0x6(BIT6)=f1
[ 639.733146] pwrdown, 0x6(BIT6)=f1
[ 641.739824] pwrdown, 0x6(BIT6)=f1
[ 643.746489] pwrdown, 0x6(BIT6)=f1
[ 645.753149] pwrdown, 0x6(BIT6)=f1
[ 647.010241] pwrdown, 0x6(BIT6)=f1
[ 647.135295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 647.136216] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 647.137240] HW_VAR_MRC: Turn on 1T1R MRC!
[ 647.753447] pwrdown, 0x6(BIT6)=f1
[ 649.766491] pwrdown, 0x6(BIT6)=f1
[ 651.773160] pwrdown, 0x6(BIT6)=f1
[ 653.779830] pwrdown, 0x6(BIT6)=f1
Can somebody help me? -
Firefox is unbearably slow on XP after updating (/questions/985969)
Typing is very slow in textboxes in Firefox 28 on XP Pro SP3
You can also check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
Rename (or delete) the sessionstore.js file and possible sessionstore-##.js files with a number and sessionstore.bak in the Firefox profile folder.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls -
Internet is SUPER slow on Macbook after update!
I updated my Macbook to 10.4.10, and for some reason ever since the internet has been slow It takes at least double if not triple the time to load Facebook and Myspace takes about 1 minute.
http://img509.imageshack.us/my.php?image=picture1da8.png
http://img116.imageshack.us/my.php?image=picture2ni2.png
Here are some pictures of my network activity! Anything I can do? Is there an update I can do to fix this?
Message was edited by: LaRonde20...and if Rick's suggestion doesn't provide any improvement to your situation, try downloading the OS 10.4.10 COMBO update for Intel and reapplying it. Reapplying the combo update has been reported to fix numerous crappy performance problems that people have posted in the iChatAV, Mail, Print&Fax, and other forums.
<soapbox flag = .TRUE.> As a general rule, I ALWAYS download the combo update, NEVER the incremental updates through system update, and have NEVER had a problem develop after applying a combo update. <soapbox flag = .FALSE.> (problems typically have only developed for me after I've installed some piece of crapware on my computer, which usually gets fixed after reapplying a COMBO update or by removing the piece of crapware and reapplying the combo update).
Don't forget to verify your boot disk before starting, and repair permissions before starting and after you're done.
Maybe you are looking for
-
I just bought a Iphone 5 -- my Iphone 4 and my ipad used to automatically sinc calendars via the Icloud whenever I entered anything on either device -- I can not get the new phone to do this.I have check the settings on both devices and they seem to
-
Access denied for folder when permissions set with WMI
Hi, When I add/modify access rights based on the Win32_ACE class, there seems to be a difference in the result, then when setting it with the GUI in Windows. The situation is as follow: I want to set Modify access on a remote folder, but also want to
-
RFC receiver adapter not getting timed out
Hello Everyone, I have a scenario like this: Web-Service --> PI -->RFC (using receiver RFC channel)-->Response back to PI from RFC --> response back to Web-Service This RFC is taking more than 5 minutes to give response back to PI but still I am not
-
How do I format Pages to publish a book 6" by 9"?
I am writing a book and wish it to be 6 inches by 9. I need to find out how Pages can auto-format my book to fit the final book size. It will be in eBook form as well as a printed copy. Any help would be appreciated. Thanks Paul FitzPatrick
-
Make offline files accessible after profile update
Hi altogether, is there anybody out there who has a deep understanding of the Windows 7 offline files feature? I would really like to know how users are granted access to the offline cache. I found the files in C:\Windows\CSC, but this folder and its