Slow Network Login - If at all
Hi Guys,
I am not that used to Mac enviroment so please be gentle
Looking for some help on an issue I am currently having with a Standalone Open Directory, slow client log in.
The site is setup running 10.4.11 on Server & Workstations. If the workstation is set to obtain the LDAP information via DHCP and the system is restarted, it will not list all the network users that are on the server. However If Directory Access on the client is set manually and restarted the network usernames list correctly on the client.
Then when you attempt to log to the workstation using the Network account, it will sometimes hang from 10 to 20 minutes and log in, or not log on at all.
Any thoughts or ideas would be much appreciated.
ok, so you updated to 10.4.3 and you did all of the following - correct?
1) updated OS
2) repaired permissions
3) zap PRAM
4) reset Open Firmware
if these are correct, which OS installer did you use? the smaller 93M file or the Combo Updater?
Similar Messages
-
Hi,
I am trying to implement a login feature to our program which will allow different users to have different rights to front panel controls. There is a server in our subnet to which I am trying to login. I have configured the necessary users and groups in the domain account manager in the server. I have also granted access to all machines in the subnet (from the account control tab via properties). The problem is that while the login works (and all the machines in the subnet can see the login server), it is painfully slow. It tooks a little over 5 seconds to login a user via the server. I have tried using the "programmatic login.vi" and the built-in "invoke login dialog.vi". In either case, the login is slow. What is happening in the server (or the "programmatic login.vi") in the login process so that it is so slow?
This is obviously a network problem because I have tested with local domains. A login to a local domain happens fast. When I enter an incorrect password to a network domain, the login prompt quickly tells me that, and there is no delay. However, with a successful login, the login is slow. What could be the cause to this problem?
I am using LabVIEW 8.6.1.
Best regards,
JarmoI am 99% sure someone else had 'slow transfer' in another thread.
Sometimes a router needs firmware update to be compatible, or upgrade the cables to cat6e, or look for a new router or switch which helped my own setup. Just look for one that says that it is "Vista compatible" actually.
http://www.thursby.com/products/dave-vs-tiger.html -
Hello,
I'm not really good with network stuff, so I know very little about my problem here. I'm working on an offshore drilling rig and they've recently set up a wi-fi system for personal use. It's very slow and governed by the nanny Websense.
I know some people are able to use their IM chats and I was wondering if there is a way to set up my iChat to work on such a slow network. It won't connect at all when I'm here. I know I won't be able to video or audio chat, but I should at least be able to text chat, shouldn't I? Or is it possible that Websense has blocked certain IM's and not others?
Any suggestions would be appreciated!
LawrenceHi,
In iChat go to the Preferences > Account section
GO to the Server Settings tab
Whilst logged off of AIM chnage the port to 443
Log in to AIM.
This is because the regular Login port is 5190.
The AIM Application on a PC or in fact the AIM for Mac application will automatically try other ports including the web browsing port (80) to make a connection.
The port 5190 is above a Threshold of 1024 where ports have to be opened specifically. Using port 443 is below this and also used fro Secure Mail by mail applications so is likely to be open.
6:55 PM Saturday; December 15, 2007 -
Why is my machine so slow I feel the hd all- ways running
Why is my machine so slow I feel the hd all- ways running?
Re: Why is my machine so slow I feel the hd all- ways running
Apr 16, 2014 9:05 PM (in response to stevejobsfan0123)
Hardware Information:
iMac (27-inch, Mid 2011)
iMac - model: iMac12,2
1 3.1 GHz Intel Core i5 CPU: 4 cores
4 GB RAM
Video Information:
AMD Radeon HD 6970M - VRAM: 1024 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:31:35
Disk Information:
WDC WD1001FALS-403AA0 disk0 : (1 TB)
EFI (disk0s1) <not mounted>: 209,7 MB
disk0s2 (disk0s2) <not mounted>: 999,35 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
OPTIARC DVD RW AD-5690H
USB Information:
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
HP Deskjet 3050 J610 series
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.google.keystone.daemon.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.oracle.java.JavaUpdateHelper.plist 3rd-Party support link
Launch Agents:
[System] com.google.keystone.agent.plist 3rd-Party support link
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist 3rd-Party support link
User Login Items:
Moveslink2
iTunesHelper
VLCStreamer
Google Drev
MenuTab for Facebook
Garmin ANT Agent
RemoteMouse
AdobeResourceSynchronizer
Internet Plug-ins:
o1dbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
OVSHelper: Version: 1.1 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.4.0.11 3rd-Party support link
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 Outdated! Update
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.2.4.18058 3rd-Party support link
SharePointBrowserPlugin: Version: 14.3.6 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 Outdated! Update
Safari Extensions:
Pinterest: Version: 1.0
Add To Amazon Wish List: Version: 1.8
LinguaLeo: Version: 1.0.5
MLB.com Toolbar: Version: 1.1
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes:
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Flip4Mac WMV 3rd-Party support link
Java 3rd-Party support link
VLC Streamer 3rd-Party support link
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Fejlrapportering: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Office Overførselscenter: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Office Påmindelser: Version: 14.3.6 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.6 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.6 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.6 - SDK 10.5 3rd-Party support link
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Tilføjelsesprogrammer/Solver.app
Wondershare Video Converter Ultimate: Version: 1.5.4 - SDK 10.5 3rd-Party support link
Time Machine:
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Destinations:
Data [Network] (Last used)
Total size: 2
Total number of backups: 54
Oldest backup: 2013-09-16 11:44:43 +0000
Last backup: 2014-04-16 17:42:09 +0000
Size of backup disk: Excellent
Backup size 2 > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
10% mds
1% EtreCheck
1% WindowServer
0% Safari
0% Moveslink2
Top Processes by Memory:
213 MB Finder
209 MB Safari
193 MB MenuTab for Facebook
143 MB com.apple.WebKit.WebContent
119 MB com.apple.IconServicesAgent
Virtual Memory Information:
311 MB Free RAM
1.59 GB Active RAM
1.30 GB Inactive RAM
823 MB Wired RAM
602 MB Page-ins
0 B Page-outs -
Slow network browsing (at times)
Hi all: Ever since we installed our new servers (January-February) we have been experiencing slow network performance. We currently run OES11 SP2 servers and use Novell Client 2 SP3 for Windows 7 (IR9 and 10) on Windows 7 64-bit workstations. We also use ZCM 11 SP3 clients. All our workstations are members of the same domain (functional level 2008 R2).
Here is what I observe. Right after completing a successful login access to any OES server takes 2-3 seconds for the directory list to display. Once one server has been accessed we do not see the delay to other OES server. Browsing and access to the domain servers seems unaffected. But after a few minutes and symptoms return. I have tried various remedies detailed in a few TIDS and Cool solutions but none seem to help. I have elevated the Novell network providers to the top of the provider list. Wireshark captures don't show any smoking guns.
Suggestions? Thanks, Chris.Originally Posted by laurabuckley
Hi Chris,
A while ago I had similar issues. I made a few changes to the Windows 7 workstations and the situation greatly improved.
The first thing that I recommend you do is turn off Autotuning.
From an elevated command prompt on the workstation: netsh interface tcp set global autotuninglevel=disabled
The second thing that I recommend you do is turn off Remote Differential Compression.
From an elevated command prompt on the workstation: Netsh interface tcp set global rss=disabled
I would suggest that you try this just on one or two workstations first and see if the situation improves.
Please do let us know how it goes.
Cheers,
I may be wrong here but I just want to clarify:
From an elevated command prompt on the workstation: Netsh interface tcp set global rss=disabled
I believe this Disables Receive side scaling, not Remote Differential Compression.
To disable Remote Differential Compression you can either remove it through the "Windows Components" in Add/Remove or Run:
ocsetup MSRDC-Infrastructure /uninstall
Along with the above I run the following in a Run Once Bundle on all machines:
netsh.exe int ip set global taskoffload=disabled
netsh.exe interface tcp set global autotuning=disabled
netsh.exe interface tcp set global rss=disabled
netsh.exe int tcp set heuristics disabled -
Very slow network connection on Mac Pro
I have a FiOS connection and good speeds on my Macbook Pro and iPad. However, my 2010 Mac Pro connects like a dog. I just connected to my yahoo page which gives typical results. On my Macbook Pro it took 3-4 seconds. On my Mac Pro it took 58 seconds for the initial page content to arrive on my screen and 1:40 for the page to be fully loaded. This is typical. It doesn't matter if I connect through ethernet or wireless - same results. It doesn't matter which browser I use.
I ran speedtest and the results were actually better on the Mac Pro - I have no ide why
Mac Pro ping 16 ms DL 30.73 mbps UL 14.28 mbps
Macbook Pro 17 ms DL 20.58 mbps UL 14.22 mbps
2010 Mac Pro, 3.33. ghz 6 core with 32 gb of ram running 10.8.2
Any suggestions.Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Network Home Directories for all users
Hi,
I hope someone can shed some light on a possible issue.
I work for a primary school in the UK.
I have Tiger server 10.4.10 running as an Open Directory Master. I have a 1TB XRAID attached to this server where the Home Directories are hosted. I have been told that they are now slow at logging in (I am currently unwell at home so have not confirmed this yet).
It used to be a magic triangle setup but found there were problems with the managed prefs for the clients not being obtained on startup and network logins not working.
The DNS and DHCP comes from the AD still.
The OD has been set up to have the same kerberos realm as that of the AD (is this wrong) as the users are in both AD and OD with same username and password.
The users Home dirs for the OD are hosted as i say on the XRAID which has a striped array of 1TB so the HDD speed shouldn't be a problem.
The server is now connected to a 1Gb switch as are the clients.
I have added more ram to the Xserve (now running on 5GB RAM). I have read that an afp server needs a lot of ram to work effectively. Is this enough?
I have not set up link aggregation yet.
The total amount of users logging in at one time will be no more than 40 users at once as there are only 40 mac machines in the school.
I hope you can help as i would like to have something to go back to school with to tackle this if it does turn out to be true.
Any more info needed just ask.
TIAHi. Let me restate so I understand it right. You are using an XServe to host network home folders and also using Active Directory for authentication? I work at a primary school also and we have an XServe that has the users home folder on it, but we also connect to an AD server for authentication. We had some speed issue with logging in but as soon as we set up a time server to ensure that both the XServe and AD server had the same time the trouble was fixed. Hope this helps.
-
Lion Server Setup (Network Login/Mobile Account and more...)
Hardware:
Mac mini Intel Core i7, 2 GHz, 8 GB memory (Server) x 1
iMac 21.5" 2.8GHz Intel Core i7, 12 GB memory (Workstation) x 6
Operating System:
Mac OS X Server Lion 10.7.4 (11E53)
Mac OS X Lion 10.7.4 (11E53)
Relevant Software:
Server.app Version 10.7.4 (1.4.3)
Workgroup Manager Version 10.7 (400.3)
Server Admin Version 10.7 (355)
So my head's swimming with "I dunno's" and I've been perusing probably all the wrong threads trying not to sound like a noob and find the literature that will finally lead me to a solution. This is my first rodeo so make no assumptions about my experience (maybe).
Short Version
I can't login network users. I get an error "You are unable to log in to the user account "<%short_name%>" at this time. Logging in using >console tells me this No home directory: <path to home directory> i.e. /Network/Servers/department.domain.com/Department/Accounts/bbunny
If anyone can point me where to read, I will do so.
Perhaps a longer discussion on how to verify that the proper permissions exist on the share/home directory in question and what those would be.
More detail...
I want to setup a Mac Mini server to have network login accounts stored on the 2nd data volume in a directory we shall call Accounts*. Here all the "network users/logins" have their home directories, so that when they login at the workstation the idea is the workstation will sync their account and allow them to login, if the server is not available, the hope is I can configure it to allow them to login if they've logged in before and the files will sync when they are able. That being the ideal, I get the impression that for best practices, Apple is discouraging the use of mobile accounts that use Home Sync perhaps because it's reliability has been iffy, please advise. A windows user might think of this as "roaming profiles" but, if I understand it, its a little more than that.
Note, I do not want to login to the server and actively work on that network share, I want the account to be local and sync'd as needed. But I want the user to be able to sit at any of the 6 other workstations and see the same documents, emails etc. Obviously if the server is down, it won't be possible to authenticate, but I think it should have cached credentials that should allow the user to login if the server is down and still go about their work.
This is the small picture...there is a larger picture that involves, parallel virtual machines of Windows Server 2008 R2 on server and and Windows 7 on the client, ical, ichat and perhaps wiki's.
I apologize for the roughness of this question, in the interest of brevity, I have plenty of problems that led me here that I can expound upon if asked.
Also a silly question someone might know the answer too, Why does the login payload settings that I have pushed to a workstation device, sometimes vanish inconsistently upon logout?Ok, Some Good news and clearer understanding to disseminate in this post I hope it helps
"the Universe" so I am posting it here in my "ever-the-noob" blog on apple forums.
Problem
What do you do when you get an error when logging into a mobile account setup?
One symptom would be the error message below...
"You are unable to log in to the user account "<%short_name%>" at this time.
Logging in using >console You get the message…
"No home directory: <path to home directory>"
or
"You are unable to log in to the user account "<%short_name%>" at this time.
Logging in using >console tells me this No home directory: <path to home directory>
Solution
Do the check list…
Short Version
Sever Admin.app > Access (Key Component)
Check Permissions on directories for your file shares.
(The reason stuff doesn't work especially when you're rebuilding/recovering a server)
File sharing setup (Turned ON, Home sharing Enabled)
Directory Utility > Directory Editor or dscl
( Do not underestimate the importance of this part!!!!
Use white-gloves when you're handling it though!!! )
Workgroup Manager
(You're poopy "main" interface that really is a "window", not a "door", but maybe Apple likes to do things "Dukes of Hazard" style?)
Long Version
Check Sever Admin.app > Access
Make sure that your user has the "Proper" access. For me I created a test user from Server.app and saw what access he had as a way to "check myself for a properly created users" and because I think one is kind of on his/her own using WGM and duplicated the same access. (I was a little neater, though and did it with a group, not individual users, that would have been a mess!)
Server Admin.app > Access
Click the "+" sign, sort by UID and Add the imported users to the following Services…
( You can use a group, but understand when Server.app creates users they get added
individually to each of these groups. )
Address Book
AFP
iCal
iChat
Mail
Profile Manager
SMB
VPN
Check Permissions on directories for your file shares.
(That's an understatement) I could go in depth about all the crap I had to read about, I still
know I am missing a chunk of tech brain when it comes to the particulars. Basically, I boil
it down to this…
Permissions require thinking about things first with regards to POSIX permissions... good
ole ls, chmod, chgrp, chown to the rescue with ugo permissions or the old 755, 600 etc
stuff.
Apple's file-sharing access uses this as a starting point to see what the user is allowed to
access.
I also needed to use chflags once to unhide a file that I mucked around with using xattr.
I still haven't figured out why folders can lose their triangles, but I didn't find out if you cp or
move them from terminal, the triangles come back in the moved or copied directory. For a
minute I thought it was because cp alone doesn't preserve flag attributes, but mv actually
works by doing a cp that preserves the flags, unless it's a bug. I dunno.
This helped me get my file visible again...
chflags hidden path_to_file
chflags nohidden path_to_file
Read up on those manuals, if you're not a terminal type go to apples website
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/
or download...
http://www.bruji.com/bwana/ I thought that was cool.
or if you prefer to read the manual in pdf try…
man -t sharing | pstopdf -i -o ./Desktop/Sharing\ Manual.pdf
man -t chown | pstopdf -i -o ./Desktop/CHOWN\ Manual.pdf
man -t chmod | pstopdf -i -o ./Desktop/CHMOD\ Manual.pdf
man -t chgrp | pstopdf -i -o ./Desktop/CHGRP\ Manual.pdf
My basic guideline was avoid using ACLs if at all possible, if you try to use them, things
can get crazy complicated, take notes and plan, baby. If you read above, opening up
permissions wide is wrong though. You would restrict permissions tightly to begin with and
then place ACE (Access Control Entries) to specifically target the rights you want to enable.
Here's one that's obviously a novice attempt to do this, but since the novice is the only one
speaking…. here it is, Universe… >:P
sudo chmod -R +ai "admin allow read,write,delete,file_inherit,directory_inherit,search,list" Department/
That allowed my admin to do all the things a normal user could do so far… It fixed things for
my admin, which made me happy. I really hate having to authenticate or sudo just to see
the contents of a nested directory. I could explain it, and even give a few notes on why its
probably overkill, but I will attempt to look less stupid till "poked".
There's another command line utility I STILL haven't read, which may bear mentioning
because…well I haven't read it. umask (see wikipedia or unix.com)…I worked past my
problems without going into it so far, but obviously it's there, and it serves a purpose.
I also found this article helpful…and educational. :O
http://www.bresink.de/osx/300321023/Docs-en/pgs/ACL.html
( Its enlightening to hear the air whistling between a developer/coder's ears, still it's
apparent he has a clear idea what's going on.
Ever wonder why when you use get info to check or assign permissions it kind of
flakes out and doesn't take? Read this article! )
Second, if you can't obtain the "specific" permissions you need with POSIX, chmod also
can set the 2nd category of permissions, which windows users may be familiar with
Access Control Lists (ACLs) and here you get some really fine granularity...messy stuff.
All in all, if I felt I could guide you through these murky waters, I would, but I think I'll let
the professionals weigh in on that one and cut my wall-of-text to ribbons.
To heuristically check I would connect from a client as one or two of my users and see what
folders I could mount as a share, armored with an understanding of what ls -le@O * showed
me in Terminal.
3.) File sharing setup (Turned ON, Home sharing Enabled)
Here is an example of using command line sharing utility where each share is properly
labeled (that took a bit for me to figure out) still this share only enables the AFP share as
you can see from my flags.
sudo sharing -a /Volumes/Hard\ Drive/Department/Database -A Database-afp -F Database-ftp -S Database-smb -n Database -s 100 -g 000 -i 10
Then you do a sudo sharing -l and get back what you just did…
List of Share Points
name: Database
path: /Volumes/Hard Drive/Department/Database
afp: {
name: Database-afp
shared: 1
guest access: 0
inherit perms: 1
ftp: {
name: Database-ftp
shared: 0
guest access: 0
smb: {
name: Database-smb
shared: 0
guest access: 0
If you mess up the sharing command, you may not be paying attention (I wasn't) but there
are a lot of defaults that Apple will just assume you meant to do anyway and it won't read
any of your flags, you have to get it right or the flags will be defaulted.
( Basically I could tell I was bombing it for one, I explicitly only wanted afp working, but
the default was afp and smb. So each time I ran sudo sharing -l after I shot my sharing
command…back would come smb shared: 1 and I knew that wasn't right. Also my
custom names were defaulting to the name of the directory not the name I had
specified. )
I like to know what protocol my share is over so when it doesn't work, I know which protocol's
are connecting. It's not full-proof, but it's a bookmark. I wish the network browser would
identify the protocol that its available listed shares are using, because small visual queues
like that help when you're trying to see what works. Maybe that's something I should
investigate via the command line?
As a note about reading forums, I discovered using command line that "\" is kind of like a
way of going to next line neatly with long commands…."\ " is a way to insert a space. As you
can see above where I have a volume with a space in it.
Removing shares was a little trickier though, sharing -r Share\ With-space didn't work….I
had to enclose it in quotes and do "Share With-space" instead. So nooby beware!
( *nix users are now rolling their eyes at this tip. )
I wasn't sure how you enabled a share for home directories from the command line, maybe its
in the manual, but I was up to my eyeballs in manuals already so I haven't gone back to
revisit this question since my work around was to go to Server.app and verify that what I set
up in the sharing in terminal was being reflected in the gui…sort of my own MVC
(model-view-controller) check.
4.) Directory Utility > Directory Editor or dscl
Make sure what you see in WGM and Server.app are reflected here….to that question let's
take a journey where I did some exploring about that.
Ever really wonder "WHY CAN"T I REMOVE AN OLD HOME DIRECTORY SHARE?!!!"
Ah, then you will - LOVE - this tip…
( Provided my testing or yours, later, doesn't prove that in my ignorance I've broken
Open Directory. Remember, WHITEGLOVES!!!! but here we get a little dirty. I think of
OD as Apple's Registry, but that's not what it is at all. However, you as the user do have
to "****" around in it from time to time. )
I scoured the forums and everyone was saying things like "You have to change your server
role" etc. which seemed a little bit dumb to me (dumb because you're pushing views around
not "controlling"), and well, yea, that share that I couldn't modify or delete was REALLY
bugging me.
Now hmm… Before you do ANYTHING, how do you try to not hurt yourself…in Windows you
can make a Registry Backup….(yea bad analogy) In Server Admin.app you can go to your Open
Directory Service > Archive and Choose a place to Archive your information. (Figure this out by
yourself, this is getting long…sheesh! It's easy. Restoring is just as easy and painless.)
Before we can remove the entry we "SEE" in WGM we should make sure no
one has it selected so as not to "corrupt" the OD db, so in WGM first before going to Directory
Utility set the Home directory to "None". (We need to remember to set this to a correct share
later….Mental Note!!!)
Now Open Directory Utility
Method 1
System Preferences > Users & Groups > Login Options
Click the Lock to make changes…
Authenticate -> click "OK" (do I REALLY have to step-by-step this?)
Network Account Sever: • Local Server - click "Edit" button here.
Open Directory Utility > Directory Editor
( Wow, did Apple hire someone from Microsoft? You'ld think with all their research in to
Human Interface Design that's WAY too many clicks to get to something you need. )
or
Method 2 (It's good to know about this directory, neat-o speed-o app's hidden here.)
Use "Go to Folder" Under Finder > Go > Go to Folder...
⇧⌘G /System/Library/CoreServices/
Click "OK"
and Double click Directory Utility.app
or
Method 3
Terminal
open /System/Library/CoreServices/Directory\ Utility.app/
Now From the Directory Editor Pane you will see a Pop-up menu Labeled "Viewing"
You should glance through this and get to know it. You should use it to see what
information is really being stored about your Users, Groups, Mounts…
We are interested in Mounts, which is where we want to go…and there is the pesky
mount that you will see reflected in WGM.
Authenticate, and delete the bugger.
Quit WGM and restart it. Voila, bad share is GONE!!!!!
a.) First select all my users
b.) Then I clicked on the "+" and added the correct share
( Remember, I only showed you the first one we created, this is another and
for THIS one you HAVE to go into Server.app and verify that it is set to be
available for Home Directories in this case for AFP. )
For the home directory entry you do this...
afp://computer.domain.com/Accounts-afp
%short_name%
/Network/Servers/computer.domain.com/Volumes/Hard\ Drive/Department/Accounts/%short_name%
%short_name% is a wild card for the short name there are other wild cards check out Apple's
Documentation on them. I lost the link sorry \<shrug\>
Interesting dscl commands…(check it out in command line form and compare side by side with
what you see in the GUI Directory Utility)
dscl . list /users
dscl . list /groups
If you want to output information about each user, though, use readall:
dscl . readall /users
dscl . readall /groups
And if you need to programatically parse said information, use -plist to make your life easier:
dscl -plist . readall /users
dscl -plist . readall /groups
This made a little more direct sense to me, language wise…but fyi "." is kind of a wild card I think so the first
commands I think look in ALL directories local, Search, LDAP whatever you have. The command here
corresponds to the Entry from the Pop-up menu "…in node > Blah…" see GUI of Directory Utility to confirm.
dscl /LDAPv3/127.0.0.1 -list /Users
dscl /Local/Default -list /Users
5.) Workgroup Manager
Remember this is a utility that is not long for this world. Apple's Mountain Lion is rumored to fully
replace it, why? Yea, Apple's making a go at MDM (Mobile Device Management) and somehow
desktop computers are being pulled/dragged along for the ride. I have plenty of issues with
Profile Manager, but I'll likely revisit it in a couple of months and see where we stand.
Anyway, treat this baby like the bottom rung, because, well it is built like you start your
foundation here, but it's just a viewer with controlling "tweaks". Use the other areas to get a solid
grasp of what is actually going on. Server.app is where you should create accounts you can
feel are safe. When you create accounts in WGM, you are responsible for making sure they
have the appropriate EVERYTHING.
This list is by no means complete, but these are the areas this noob is or was prepared to talk about.
Good night for now. Enjoy climbing my wall of text, and yea sorry about that. :O Run for you lives!!!!
- Signed Shadowwraith -
Network logins not working with 10.7 and 10.8 clients
Hi
I have Snow Leopard Server (10.6.8) running on a Mac Mini for the past 3 years. The client Macs were all running Snow Leopard and could happily do network logins. I recently upgraded my client Macs to 10.7 and 10.8.Now they cannot login via Network logins. Only via the Other selection. Network logins produces the Error occured dialog box. Once users do a local login, they have access to all server services (file sharing, calendar, messaging, contacts, etc.)
The server is setup as a OD Master with Kerberos. The changeip check is all good. The DNS is working. I have made no changes to the server. Only the clients were upgraded from Snow Leopard.
I have read a lot about similar problems but still haven't solved this problem.
I hope someone can help.
Kind regards
MichaelHi all
I solved this annoying issue
It was an Open Directory issue. If you have upgraded clients to 10.7 or 10.8 from 10.6, the OD Master passwords are incompatible with 10.7 or 10.8.
The fix is simple.
1. Stop AFP file shares
2. Export Users, Groups and Computers from Workgroup Manager then quit the the Workgroup Manager
3. Demote the OD Master to Standalone
4. Promote the Standalone OD to a Master OD,
5. Reimport the Users, Groups and Computers back into Workgroup Manager
6. Reset all passwords and home folders
7. Rebind all clients computers
That's it.
I hope this helps someone.
Cheers
Michael -
Sudden problems with network logins
Hello,
I've suddenly started experiencing an issue preventing normal network logins. Logging in on client machines gives "The home folder for user "xxxxxx" is not located in the usual place or cannot be accessed" This occurs on every client machine - all are running Tiger. The server is running Leopard. This occurs with user home accounts located on the OD master, as well as the OD replica. The automount record appears to be correct, "sudo sharing -l" reports correct information, AFP logs show normal logins, as does all open directory logs. I can mount home folders manually (apple + K method), and permissions appear to be correct on home folders.
I've discovered that attempting to change directories to /Network/Servers gives an authentication failure, and, for extra fun, I opened a terminal window on the ODM, su'd to an open directory user (who had a home directory on the ODR)and poked around a bit only to discover that ls -l showed this user as owning everything, and everything had no permissions whatsoever.
Has anyone seen this behavior? Does anyone have any ideas?
Thank you!
ColinHello,
I just upgraded a complete company from 10.4.11 to 10.5.6, about 25 machines and exactly 2 of them show that behaviour. The network accoutns are all ok, you con use them on other machines. I can confirm that /Network/Servers is not a correct path on both of the bad machines.
Ther is NO issue with time synchronization, access rights or whatever.
Funny, the REAL interesting questions seem to go unanswered all the time...
Can anybody give me a hint (other than "archive and install")?
Regards, Lucian -
Very slow network throughput since 2-3 days ago
I've been having very slow network throughput since 2-3 days ago, with no apparent reason.
I see (from what I can tell) no relevant package updates during that period.
Connections are nfs v3 shares, over UTP cat5e gigabit ethernet.
I've been running this setup for many years now, without such issues.
But now, it's as if throughput is capped around 100Mbps.
Is there a way to see - if for some reason - a network adapter has locked to 100Mbps, instead of 1Gbps?
ifconfig does not say anything.
PS: netstat -i does not report any errors over the connection.
Last edited by wantilles (2011-04-12 15:25:52)experiencing the same issue with my wlan0 since update to kernel2.6.38 yesterday night.
Speed tests grant me a download speed of around 50kbps. Should be around some mbit though! How do I find out, why it's acting so slow?
edit: switched to win7 for the moment. Everything is speedy and normal around here. Something is seriously broken in my arch box!
Can this be related to xorg-server1.10.902 or kernel2.6.38? It would also explain the strange issues with pacman lately (like this https://bbs.archlinux.org/viewtopic.php?id=116429 or this https://bbs.archlinux.org/viewtopic.php?id=116696).
More people seem to experience the network issue: https://bbs.archlinux.org/viewtopic.php?id=116738
Any insights?
edit#2: Just got back from win7. Upload speed in Arch is quite okay. Download speed is extremely fucked though. I wonder why? At least now I know why pacman has problems getting package upgrades, etc.
How do I fix a problem with the wlan0 connection? Haven't had any of those before with gnome and Networkmanager. I'm using the ath9k module.
My rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Europe/Berlin"
KEYMAP="de"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
MODULES=(ath9k snd_hda_intel snd_hda_codec snd_hda_codec_idt snd_hwdep snd_pcm snd_seq snd_seq_device snd_timer fuse nvidia loop vboxdrv !vboxnetflt !vboxnetadp !vboxguest !vboxsf vboxvideo acpi_cpufreq cpufreq_powersave cpufreq_ondemand !snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp wacom)
#MODULES=(!snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp !vboxnetflt !vboxnetadp !vboxguest !vboxsf)
#MODULES=()
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="davelab"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
# vboxnetflt
eth0="eth0 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(!eth0 !wlan0 !lo)
#WIRELESS_INTERFACE="wlan0"
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng laptop-mode cpufreq dbus !hal networkmanager !fam !avahi-daemon samba !smbnetfs cups !webmin alsa !mpd crond bluetooth xinetd sensors clamav ntpd !privoxy !tor httpd !tomcat7 mysqld !iptables)
dmesg output:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
Command line: root=/dev/sda3 ro resume=/dev/sda3 5
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
NX (Execute Disable) protection: active
DMI present.
DMI: Dell Inc. Studio XPS 1340/ , BIOS A14 03/25/2010
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x160000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-DBFFF uncachable
DC000-EFFFF write-through
F0000-FFFFF write-back
MTRR variable ranges enabled:
0 base 0A0000000 mask FE0000000 uncachable
1 base 0C0000000 mask FC0000000 uncachable
2 base 000000000 mask F00000000 write-back
3 base 100000000 mask FC0000000 write-back
4 base 140000000 mask FE0000000 write-back
5 base 09FF00000 mask FFFF00000 uncachable
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
found SMP MP-table at [ffff8800000f7b50] f7b50
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000008fec0000
0000000000 - 008fe00000 page 2M
008fe00000 - 008fec0000 page 4k
kernel direct mapping tables up to 8fec0000 @ 8febb000-8fec0000
init_memory_mapping: 0000000100000000-0000000160000000
0100000000 - 0160000000 page 2M
kernel direct mapping tables up to 160000000 @ 15fff9000-160000000
RAMDISK: 37e56000 - 37ff0000
ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001)
ACPI: FACS 000000008fee4fc0 00040
ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-0000000160000000
Initmem setup node 0 0000000000000000-0000000160000000
NODE_DATA [000000015fffb000 - 000000015fffffff]
[ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015c200000-ffff88015f7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00160000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009d
0: 0x00000100 -> 0x0008fec0
0: 0x00100000 -> 0x00160000
On node 0 totalpages: 982605
DMA zone: 56 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3919 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 571128 pages, LIFO batch:31
Normal zone: 5376 pages used for memmap
Normal zone: 387840 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10dea301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88008fc00000 s82176 r8192 d24320 u1048576
pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
Policy zone: Normal
Kernel command line: root=/dev/sda3 ro resume=/dev/sda3 5
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3798920k/5767168k available (3795k kernel code, 1836748k absent, 131500k reserved, 2307k data, 556k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptable hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304
Extended CMOS year: 2000
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 39321600 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.376 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.78 BogoMIPS (lpj=8001253)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
ACPI: Core revision 20110112
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (9604.67 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
pci 0000:00:03.2: PME# supported from D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
pci 0000:00:03.5: reg 10: [mem 0xf0600000-0xf067ffff]
pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: PME# disabled
pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff]
pci 0000:00:04.1: supports D1 D2
pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.1: PME# disabled
pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff]
pci 0000:00:06.0: supports D1 D2
pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.0: PME# disabled
pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff]
pci 0000:00:06.1: supports D1 D2
pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:06.1: PME# disabled
pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff]
pci 0000:00:08.0: PME# supported from D3hot D3cold
pci 0000:00:08.0: PME# disabled
pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff]
pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff]
pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff]
pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PME# disabled
pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:17.0: PME# disabled
pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:18.0: PME# disabled
pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00
pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller
pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff]
pci 0000:01:07.0: supports D1 D2
pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.0: PME# disabled
pci 0000:01:07.1: [1180:0822] type 0 class 0x000805
pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff]
pci 0000:01:07.1: supports D1 D2
pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.1: PME# disabled
pci 0000:01:07.2: [1180:0592] type 0 class 0x000880
pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff]
pci 0000:01:07.2: supports D1 D2
pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.2: PME# disabled
pci 0000:01:07.3: [1180:0852] type 0 class 0x000880
pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff]
pci 0000:01:07.3: supports D1 D2
pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:07.3: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
pci 0000:02:00.0: [10de:06e8] type 0 class 0x000300
pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: [10de:0866] type 0 class 0x000300
pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 04-05]
pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
pci 0000:06:00.0: supports D1
pci 0000:06:00.0: PME# supported from D0 D1 D3hot
pci 0000:06:00.0: PME# disabled
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:18.0: PCI bridge to [bus 08-08]
pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 000000008fec0000 - 000000008fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
hpet0: 4 comparators, 64-bit 25.000000 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0xffc00000-0xffffffff]
pnp 00:00: [mem 0xfec00000-0xfec00fff]
pnp 00:00: [mem 0xfee00000-0xfeefffff]
pnp 00:00: [mem 0xfed00000-0xfed00fff]
system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: [io 0x0000-0x0cf7 window]
pnp 00:01: [io 0x0d00-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0x000f0000-0x000fffff window]
pnp 00:01: [mem 0xa0000000-0xfebfffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [irq 0 disabled]
pnp 00:02: [irq 8]
pnp 00:02: [mem 0xfed00000-0xfed003ff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: [mem 0xf0600000-0xf0607fff]
pnp 00:03: disabling [mem 0xf0600000-0xf0607fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0600000-0xf067ffff]
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [io 0x1000-0x107f]
pnp 00:04: [io 0x1080-0x10ff]
pnp 00:04: [io 0x1400-0x147f]
pnp 00:04: [io 0x1480-0x14ff]
pnp 00:04: [io 0x1800-0x187f]
pnp 00:04: [io 0x1880-0x18ff]
system 00:04: [io 0x1000-0x107f] has been reserved
system 00:04: [io 0x1080-0x10ff] has been reserved
system 00:04: [io 0x1400-0x147f] has been reserved
system 00:04: [io 0x1480-0x14ff] has been reserved
system 00:04: [io 0x1800-0x187f] has been reserved
system 00:04: [io 0x1880-0x18ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [io 0x0060]
pnp 00:05: [io 0x0064]
pnp 00:05: [irq 1]
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: [irq 12]
pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
pnp 00:07: [io 0x0010-0x001f]
pnp 00:07: [io 0x0022-0x003f]
pnp 00:07: [io 0x0044-0x005f]
pnp 00:07: [io 0x0072-0x0073]
pnp 00:07: [io 0x0074-0x007f]
pnp 00:07: [io 0x0091-0x0093]
pnp 00:07: [io 0x0097-0x009f]
pnp 00:07: [io 0x00a2-0x00bf]
pnp 00:07: [io 0x00e0-0x00ef]
pnp 00:07: [io 0x04d0-0x04d1]
pnp 00:07: [io 0x0080]
pnp 00:07: [io 0x0910-0x0911]
pnp 00:07: [io 0x0295-0x0296]
system 00:07: [io 0x04d0-0x04d1] has been reserved
system 00:07: [io 0x0910-0x0911] has been reserved
system 00:07: [io 0x0295-0x0296] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0000-0x0008]
pnp 00:08: [io 0x000a-0x000f]
pnp 00:08: [io 0x0081-0x0083]
pnp 00:08: [io 0x0087]
pnp 00:08: [io 0x0089-0x008b]
pnp 00:08: [io 0x008f]
pnp 00:08: [io 0x00c0-0x00d1]
pnp 00:08: [io 0x00d4-0x00df]
pnp 00:08: [dma 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:09: [io 0x0061]
pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:0a: [io 0x0070-0x0071]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:0b: [io 0x00f0-0x00f1]
pnp 00:0b: [irq 13]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0c: [io 0x0300-0x0307]
pnp 00:0c: [irq 10]
pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: bridge window [io disabled]
pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
pci 0000:00:09.0: bridge window [mem pref disabled]
pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:0c.0: PCI bridge to [bus 02-02]
pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
pci 0000:00:10.0: PCI bridge to [bus 03-03]
pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
pci 0000:00:15.0: PCI bridge to [bus 04-05]
pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:00:16.0: PCI bridge to [bus 06-06]
pci 0000:00:16.0: bridge window [io disabled]
pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
pci 0000:00:16.0: bridge window [mem pref disabled]
pci 0000:00:17.0: PCI bridge to [bus 07-07]
pci 0000:00:17.0: bridge window [io disabled]
pci 0000:00:17.0: bridge window [mem disabled]
pci 0000:00:17.0: bridge window [mem pref disabled]
pci 0000:00:18.0: PCI bridge to [bus 08-08]
pci 0000:00:18.0: bridge window [io disabled]
pci 0000:00:18.0: bridge window [mem disabled]
pci 0000:00:18.0: bridge window [mem pref disabled]
pci 0000:00:09.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:10.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:15.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:16.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:17.0: setting latency timer to 64
ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:18.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
pci_bus 0000:01: resource 10 [mem 0x000cc000-0x000cffff]
pci_bus 0000:01: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:01: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: resource 17 [mem 0x000e8000-0x000ebfff]
pci_bus 0000:01: resource 18 [mem 0x000ec000-0x000effff]
pci_bus 0000:01: resource 19 [mem 0x000f0000-0x000fffff]
pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1640k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff88008bc00000 - ffff88008fc00000
software IO TLB at phys 0x8bc00000 - 0x8fc00000
Simple Boot Flag at 0x36 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1302716230.603:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7422
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:0a: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
PM: Checking hibernation image partition /dev/sda3
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:0a: setting system clock to 2011-04-13 17:37:11 UTC (1302716231)
Initalizing network drop monitor service
Freeing unused kernel memory: 556k freed
udev[38]: starting version 166
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:0b.0: version 3.0
ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
ahci 0000:00:0b.0: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
ata2.00: configured for UDMA/133
ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Refined TSC clocksource calibration: 2399.988 MHz.
Switching to clocksource tsc
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
udev[632]: starting version 166
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:0a.0: setting latency timer to 64
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
ath9k 0000:06:00.0: setting latency timer to 64
input: PC Speaker as /devices/platform/pcspkr/input/input1
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f7:35:cf
forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
i2c i2c-0: nForce2 SMBus adapter at 0x3040
i2c i2c-1: nForce2 SMBus adapter at 0x2000
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Registered led device: ath9k-phy0::radio
Registered led device: ath9k-phy0::assoc
Registered led device: ath9k-phy0::tx
Registered led device: ath9k-phy0::rx
ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:04.1: setting latency timer to 64
ehci_hcd 0000:00:04.1: EHCI Host Controller
ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
ehci_hcd 0000:00:04.1: debug port 1
ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:06.1: setting latency timer to 64
ehci_hcd 0000:00:06.1: EHCI Host Controller
ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:06.1: debug port 1
ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
HDA Intel 0000:00:08.0: power state changed by ACPI to D0
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
hda_intel: Disable MSI for Nvidia chipset
HDA Intel 0000:00:08.0: setting latency timer to 64
[Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
wmi: Mapper loaded
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: EC: GPE storm detected, transactions will use polling mode
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
usb 1-1: new high speed USB device using ehci_hcd and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (60 C)
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
ACPI: AC Adapter [ADP0] (on-line)
usb 1-2: new high speed USB device using ehci_hcd and address 3
input: Dell WMI hotkeys as /devices/virtual/input/input7
acpi device:0c: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input8
ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
acpi device:14: registered as cooling_device3
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no)
usb 2-1: new high speed USB device using ehci_hcd and address 2
firewire_core: created device fw0: GUID 424fc00010f09890, S400
firewire_core: phy config: card 0, new root=ffc1, gap_count=5
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
usb 2-3: new high speed USB device using ehci_hcd and address 3
usb 1-1.1: new low speed USB device using ehci_hcd and address 5
usb 1-1.2: new full speed USB device using ehci_hcd and address 6
usb 1-1.4: new high speed USB device using ehci_hcd and address 7
cdc_wdm 2-1:1.5: cdc-wdm-176: USB WDM device
cdc_wdm 2-1:1.6: cdc-wdm-175: USB WDM device
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
cdc_acm 2-1:1.1: ttyACM0: USB ACM device
cdc_acm 2-1:1.3: ttyACM1: USB ACM device
scsi6 : usb-storage 1-2:1.0
cdc_acm 2-1:1.9: ttyACM2: USB ACM device
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
scsi7 : usb-storage 1-1.4:1.0
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
cdc_ether 2-1:1.7: wwan0: register 'cdc_ether' at usb-0000:00:06.1-1, Mobile Broadband Network Device, 02:80:37:ec:02:00
usbcore: registered new interface driver cdc_ether
input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
usbcore: registered new interface driver uas
usbcore: registered new interface driver zaurus
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
generic-usb 0003:046D:C52B.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input1
generic-usb 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input0
logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input1
scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
sd 6:0:0:0: Attached scsi generic sg2 type 0
sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg3 type 0
sd 7:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
sd 7:0:0:0: [sdc] Write Protect is off
sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdc: unknown partition table
sd 7:0:0:0: [sdc] Attached SCSI disk
sdb: unknown partition table
sd 6:0:0:0: [sdb] Attached SCSI disk
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
hda-intel: Codec #1 probe error; disabling it...
firewire_core: created device fw1: GUID 0001f2000001eda4, S400, 1 config ROM retries
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input15
input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:04.0: setting latency timer to 64
ohci_hcd 0000:00:04.0: OHCI Host Controller
ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0886000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 19
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:06.0: irq 19, io mem 0xf0887000
fuse init (API version 7.16)
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
nvidia 0000:02:00.0: enabling device (0004 -> 0007)
nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
nvidia 0000:02:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
nvidia 0000:03:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
loop: module loaded
vboxdrv: Found 2 processor cores.
VBoxDrv: dbg - g_abExecMemory=ffffffffa0f04d20
vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1368
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
[drm] Initialized drm 1.1.0 20060810
usbcore: registered new interface driver wacom
wacom: v1.52:USB Wacom tablet driver
usb 3-4: new full speed USB device using ohci_hcd and address 2
hub 3-4:1.0: USB hub found
hub 3-4:1.0: 3 ports detected
EXT4-fs (sda3): re-mounted. Opts: (null)
EXT4-fs (sda3): re-mounted. Opts: (null)
usb 3-4.1: new full speed USB device using ohci_hcd and address 3
input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input19
generic-usb 0003:413C:8157.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
usb 3-4.2: new full speed USB device using ohci_hcd and address 4
input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input20
generic-usb 0003:413C:8158.0007: input,hidraw6: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
Adding 6243324k swap on /dev/sda4. Priority:-1 extents:1 across:6243324k
usb 3-4.3: new full speed USB device using ohci_hcd and address 5
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
CE: hpet increased min_delta_ns to 11520 nsec
CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
EXT4-fs (sda3): re-mounted. Opts: barrier=1,data=ordered,commit=360
forcedeth 0000:00:0a.0: eth0: no link during initialization
ohci_hcd 0000:00:06.0: PCI INT A disabled
ohci_hcd 0000:00:06.0: PME# enabled
ohci_hcd 0000:00:06.0: BAR 0: set to [mem 0xf0887000-0xf0887fff] (PCI address [0xf0887000-0xf0887fff])
ohci_hcd 0000:00:06.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
ohci_hcd 0000:00:06.0: PME# disabled
ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:06.0: setting latency timer to 64
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
i2c /dev entries driver
wlan0: authenticate with 1c:af:f7:89:a6:76 (try 1)
wlan0: authenticated
wlan0: associate with 1c:af:f7:89:a6:76 (try 1)
wlan0: RX AssocResp from 1c:af:f7:89:a6:76 (capab=0xc31 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
cfg80211: Calling CRDA for country: GB
cfg80211: Regulatory domain changed to country: GB
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
Intel AES-NI instructions are not detected.
padlock_aes: VIA PadLock not detected.
wlan0: no IPv6 routers present
EXT4-fs (sda3): re-mounted. Opts: commit=0
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
ifconfig wlan0:
wlan0 Link encap:Ethernet HWaddr 00:22:5F:62:3D:05
inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:5fff:fe62:3d05/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:87499 errors:0 dropped:0 overruns:0 frame:0
TX packets:137443 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:23679050 (22.5 Mb) TX bytes:160748042 (153.3 Mb)
I wonder why this is happening
Last edited by king.flasher.dave (2011-04-13 16:15:59) -
Hi All!!!
I have a client which connect to the database through slow network (2Mbit/s) with slow response time:
PING (10.6.0.5) from 10.1.9.24 : 56(84) bytes of data.
64 bytes from (10.6.0.5): icmp_seq=1 ttl=124 time=115 ms
64 bytes from (10.6.0.5): icmp_seq=6 ttl=124 time=109 ms
64 bytes from (10.6.0.5): icmp_seq=7 ttl=124 time=108 ms
Once per day client exec sql query which take 15Meg of data from database.
It's take a lot of time, much more if I transfer this data through FTP.
Why it's happend?
May be server can compress data before transfer?
Help me please.Contact the carrier.
-
After default Companion installation (and upgrade to 1.6, all on Windows 2000), I've got an unwanted popup Network Login screen even before I can get to the:
http://machine_name:7777/pls/htmldb
I can satisfy this additional login popup by providing a valid database credentials (e.g. system/manager), however it's annoying to have unwanted login popup that does not serve any purpose. Thanks. VRhi vr--
there's more on mod_plsql DAD configuration in section/chapter 4 of the htmldb 1.6 installation guide, but the install you describe places your dad named "htmldb" in the file $ORACLE_COMP_CD_HOME/Apache/modplsql/conf/marvel.conf. as scott suggested, it sounds as if you don't have a valid username/password in that DAD. you'd want to put htmldb_public_user in for that user and his valid password, as well. check the install guide if then you need to obfuscate that password.
hope this helps,
raj -
I just posted another thread about slow PHD login issues, but this is separate (I think). I have modified the guest accounts on our work computers to include some customizations such as a set of calendar subscriptions, a reduced set on the Dock, and some custom Safari preferences like home page and bookmarks. When I try to log in as a guest, there is a pause at the login screen for somewhere between 30 seconds and 10 minutes. The guest icon looks like it has been pressed, but the screen is unresponsive and does not yet show the login process. Eventually, it successfully logs in.
Is there anything I can do to speed this up? People often think that it isn't working, and try clicking Guest over and over again. And even if you do understand that it is slow, it seems ridiculous that one should have to wait for minutes on end just to log in.
It looks like the total size of the /System/Library/User Template folder is about 280MB - 125MB of ~Library/Application Support, 50B of ~Library/Calendars, and around 80MB of ~/Library/Fonts. Is this what's causing the slowdown? I imagine that I could move some of the fonts (probably from Microsoft Office) to /Library/Fonts, but I don't know how much I could reduce the sizes of the others.
Thanks in advance for any help,
GregIt looks like the total size of the /System/Library/User Template folder is about 280MB - 125MB of ~Library/Application Support, 50B of ~Library/Calendars, and around 80MB of ~/Library/Fonts. Is this what's causing the slowdown?
Your customized User Template folder is definitely part of the problem, if not all of the problem. The normal size of that is 6.7 MB. Every time one logs into the guest account, the entire contents of User Template is being copied to ~guest. That can take quite a while if you have grown it to 280MB.
Hacking the System Folder is not a good way to customize the guest account. Set the User Template back to the OS X default. Move the fonts and app support files into /Library/Fonts and /Library/Application Support, where they will be accessible to all users. Use Workgroup Manager (part of the Leopard Server Admin Tools free download) to customize the Dock. -
Slow network after Lion upgrade
Since I upgraded all my Macs to Lion, my network transfers are terribly slow over gigabit ethernet. My network info is:
I have a Time Capsule
Acting as my home router
I connect to the internet through it
I have a DroboFS connected to the Time Capsule via cat 6 ethernet (it is running the most current firmware)
I connect to the Time Capsule via Wifi and gigbit ethernet (all cabling is cat6 ot cat5e and all links report as gigabit)
I have a netgear switch (gigabit) connected to the Time Capsule (via cat 6 cable) and have one Mac connected to the switch via cat 6 ethernet
I have an Aiport Express conected to the switch for a separate wireles network for non-N connections (802.11 g/b/a)
File transfers over wifi do not seem any slower, but doing file transfers over the gigabit ethernet is terribly slow - in the under 100 kilobyte per second range. This is especially true if I try to move multigigabyte folders between the Time Capsule and the DroboFS, using the Mac connected to the netgear switch. This is also true moving files from the Mac to either the Time Capsule or the Drobo. Time Machine backups are also painfully slow.
I have changed out the switch and it has not made any difference. I have connected the Mac to the Time Capsule directly - bypassing the switch (i.e. nothing is plugged into the switch) to make sure the switch is not the problem - and it isn't. The slow transfers happen with or without the switch. In addition, the computer will often freeze while transferring files.
I have change the DNS to OpenDNS. This made no differnce. I deleted the ethernet service in the networking preference pane and re-added it. This also made no difference. I power cycled all the devices - Mac, Time Capsule, Drobo, switch. Again, no difference.
I had none of these issues with Snow Leopard. If anyone has any suggestions on resolving my slow network issue, please let me know. Thanks!Am having the same issues. Taking painfully long time to even copy 20Mb file across our network. We have 3 Lion clients 1 Leopard connected to Tiger Server all up to date with their versions. The network was fine until loading clients with Lion, although it seems to have deteriorated a little.
Maybe you are looking for
-
I bought elements 13 online. I was able to download it but not open it. I looked for a mac version before I bought and did not see one. Did I buy the wrong version?
-
Misc. songs not syncing to classic....
Not all of my library songs will sync to my classic. I get an error msg. something like 'can not locate IP'. Any ideas?
-
Dear coleagues, i need charge PO with field BWVORG = 008 into BW, if you run the extractor2LIS_02_ITM on RSA3 you can see this PO's, when you try to charge this one on BW you can't because the start routine deleting this kind of BWVORG, please how ca
-
Need some help with color on a column.
Hello I need some help on how I can set the color on either column header or the whole column. I have a report with where the first row display a total sum. The rows under that are htmldb_item.text where the user may input some values. The sum of the
-
HT4946 Have a new mac how do i transfer from dell to mac
I have a new iMac how do I transfer my data from my dell?