Slow network traffic when replica1 is started

Hi, I have a problem with a WLSS cluster. Each time I started the replica the network traffic turns so slow. I dont know how to explain that. Besides I make a Camtasia video that you could download from this URL.
http://rapidshare.com/files/174413972/BEA_ping.wmv.html
I hope you can told me whats going on.
Thanks a lot
Greetings

I've also noticed that my airport express is blinking green, showing network traffic, when both my imac and ipad are turned off - even though I have the airport express set to be hidden, password protected and limited to certain airport IDs.
The cable company sends continuous, almost non-stop garbage down the line. The tech guy at the cable company would say that the devices are "associating". That's why you see the green light flashing. You might want to turn off the "flash on activity" option and simply have it glow solid green...unless you like to watch the flashing, or you want to switch to DSL.
Try turning off the anti-virus to see if that helps wireless perform better. Most anti-virus applications do more harm than good. Otherwise, look for wireless interference from another nearby wireless network, cordless phone, or even that new security system at the neighbors.

Similar Messages

  • Slow Airport Express blinking green - network traffic when all devices off?

    My G5 imac and airport express are lightning fast when everything boots up, slow as molasses later. The airport express is 3 feet away from my G5, and hooked up by ethernet to a cable modem.
    I've also noticed that my airport express is blinking green, showing network traffic, when both my imac and ipad are turned off - even though I have the airport express set to be hidden, password protected and limited to certain airport IDs. Is it possible that my airport are being hijacked, or is there another reason for the variability in speed? My MacScan and iAntiVirus report no malware or cookies or viruses.
    imac intel Mac OS X (10.6.4) airport express 5.5.1

    I've also noticed that my airport express is blinking green, showing network traffic, when both my imac and ipad are turned off - even though I have the airport express set to be hidden, password protected and limited to certain airport IDs.
    The cable company sends continuous, almost non-stop garbage down the line. The tech guy at the cable company would say that the devices are "associating". That's why you see the green light flashing. You might want to turn off the "flash on activity" option and simply have it glow solid green...unless you like to watch the flashing, or you want to switch to DSL.
    Try turning off the anti-virus to see if that helps wireless perform better. Most anti-virus applications do more harm than good. Otherwise, look for wireless interference from another nearby wireless network, cordless phone, or even that new security system at the neighbors.

  • [Forum FAQ] Why does Office 2013 cost more network flow when the application starts by default?

    Recently, we’ve heard that our customers encounter high network traffic since they large-scalely deploy Office 365/2013 within the domain/site. Does this behavior relate to the new Office? Or does Office 365/2013 cost more network resources in this case?
    To troubleshoot this, we consider to analyze what happened during the process by Network Monitor tool. 
    Start a new capture first and launch Office Word 2013, get the following things as the screenshots:
    According to the information above,
    in addition to the network authentication flow, we could notice that the Word.exe would download a lot of PNG files from the link “/en-us/templates”. What about those PNG files?
    Let us try to directly visit them via IE:
    http://office.microsoft.com/en-us/templates/TM103463086.png?ts=AOLhIeGIzwg
    Beyond question, they are the thumbnails of the Office template which are downloaded while the Office application starts by default.

    In
    some certain circumstances,
    we might disable it by Office option or Group policy.
    Disable Start Screen by Office 2103 UI:
    Open Office 2013 application, go to File in Ribbon > Options tab > General page > under the section of Start Screen options, uncheck the options "Show the
    Start screen when this application starts"
    Disable Start Screen by Registry key:
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Common\General
    DisableBootToOfficeStart (DWORD): set the value
    to 1
    Disable Start Screen by Group Policy:
    Disable Start Screen by OCT:
    That's all. If you have any questions or concerns about this topic, feel free to post here.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

  • Any advice on where to start when troubleshhoting a slow network (users complaints)?

    We currently have users from one of our branch office that complains around network performance issues (slow network). Troubleshooting issues like this one was not the focus of my CCENT studies (got certified 2 weeks ago) but I was assigned that ticket last Friday (first assignment). I was thinking to call one of the users and ask him to connect on another computer to see if he still encounters the same issue (that would tell me if it is related to his computer or not - probably layer 1, 2 issue), ask him to try another application (to help determine if it is a Layer 7 issue) and then if it is not related to neither one of these I was thinking to start looking at the switch interface to which the computer is connected to. I would like to know if someone could tell me if I am on the right path and what else I should verify/investigate? Are there root cause analysis tools that exist to help solve/troubleshoot such issues?
    Thanks in advanced.

    Patrick Salmon wrote:We currently have users from one of our branch office that complains around network performance issues (slow network). Troubleshooting issues like this one was not the focus of my CCENT studies (got certified 2 weeks ago) but I was assigned that ticket last Friday (first assignment). I was thinking to call one of the users and ask him to connect on another computer to see if he still encounters the same issue (that would tell me if it is related to his computer or not - probably layer 1, 2 issue), ask him to try another application (to help determine if it is a Layer 7 issue) and then if it is not related to neither one of these I was thinking to start looking at the switch interface to which the computer is connected to. I would like to know if someone could tell me if I am on the right path and what else I should verify/investigate? Are there root cause analysis tools that exist to help solve/troubleshoot such issues? Thanks in advanced.
    This is a pretty wide open question, and could be caused by a myriad of things. I'm going to make a couple of assumptions (yeah, I know, make an ass out of you and umption) such as the branch office is linked to head office by soem kind of dedicated link, and uses that dedicated link for internet access via the head office instead of having a local internet link. You may not have this, but the process should be similar - just the weight of the diagnosis of different stages may be different.
    First off, get the user to define "slow". Compare the expectations of the user to the actual infrastructure at the site - if he's expecting a 10 MB/s download rate from the internet (100 mb/s) and you've only got a T1 or E1 link (1.5 mb/s), then it doesn;t matter WHAT you do, he's going to complain it's "slow".
    Then move to the basics. Have the PC's investigated. Are they connected at the rate you expect? 100 Mb/s? 1 gig? Full duplex? The most common problem I've seen of this type is incorrect duplex negotiation - PC thinks it's full fuplex, switch thinks it's half duplex, and the result is lots of dropped packets and retries, resulting in "slow" connections almost everywhere. There's also the possibility of speed auto negotiation failing - something capable of 1 gig negotiating 10 Mb/s makes a *big* difference, especially if it's internal infrastructure being accessed.
    Do some PING tests - ping a known local host - the local default router, for example - and see what kind of RTT you get. Then ping a known "intra" company host - one which is within the company but not on the local branch office site. What kind of RTT's do you get there? Finally, test a known external site - www.google.com, or a public DNS like the one at 4.2.2.2 - what kind of PING RTT's do you get to them?
    Then traceroute - do the same ting, and look for weird hops, or really slow responses - is the workstation getting hooked up on something, protocol-wise, which does a reverse lookup (SSH is a classic example) before accepting connections - and when the RDNS doesn't exist, it "pauses" for several seconds.
    Then it gets complex - start looking into the routers involved, and check for dropped packets or errors in the log. Check with the link provider and ask them if they see any errors on the link.
    Where you go from there depends really on what you find up to now. ISP, management to, erm, educate the user to the realities of life in remote locations, or maybe you've actually got some faulty hardware somewhere you need to fix. You never know, it does happen! :-)
    Good luck.
    Cheers.

  • Hi Team, Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will st

    Hi Team,
    Showing Yellow icons after every 15 to 20 Min and internet stop working.when we enable- disbale the network connection then will internet start working fine.Some time network connection is disable but when we renable that connection it will stuck on enabling
    and will not renable till i am not restart that machine. I have 350 Machine in network but facing this issue in 25 machines. Kindly help me on this issue .
    Regards
    Sahil bhateja

    Hi，
    So switch a LAN card fix this issue...seems a compatibility issue or maybe some packs or programs you installed recently cause this issue.
    Have you manually check the network adapter driver from the PC's manufacture website? sometimes, it will be a time delay before Microsoft push out the driver update.
    Check if issue exists in safemode with network, this mode will launch Windows with limited sets of files and drivers. 
    if you have a restore point, restore the pc to a previous point at which the pc is functioning fine.
    Yolanda Zhu
    TechNet Community Support

  • Oracle 10G Non-Network install - OEM will not start when on the LAN.

    Greetings,
    Got through a non-networked 10G Enterprise installation OK; I chose to create the orcl schema, connected to it through various utilities, added new tablespace, and all was well. I also checked my Host Name by pinging it in DOS, it showed me the IP address of the MS loopback adapter which is what I was expecting.
    Once I connected the same machine to the LAN (and internet) and re-booted, for some reason the Host Name was now assigned the dynamic IP address of the LAN and not LAN2 (which is the loopback adapter that is assigned a static local IP address). It did this even though I had already added an entry in the /etc/hosts file that explicitly assigns a static IP address to the Host Name (as recommended in the Oracle 10G pre-installation instructions). I also could not get the OEM to launch a webpage, run and connect to the orcl database after the re-boot; I am wondering if this is related to the IP address assigned to Host Name changing; maybe the Oracle agent can no longer resolve the URL for some reason?
    In the end I find that the only way to insure I can have a working Oracle environment and be on an active network at the same time, is to bring up the Oracle environment on a standalone system first, and once Oracle is running connect the system to the network. Is there no way to automate this process?
    The format of the hosts file entry recommended by the Oracle 10G pre-installation instructions is as follows:
    ===========================================================
    IP_address hostname.domainname hostname
    where:
    IP_address is the non-routable IP address you entered for the loopback adapter.
    hostname is the name of the computer.
    domainname is the name of the domain.
    For example:
    10.10.10.10 mycomputer.mydomain.com mycomputer
    ==========================================================
    In my case since I am not part of a Windows domain (but am part of a Windows Workgroup), I added an entry in the /etc/host file that looks like the following:
    # Copyright (c) 1993-1999 Microsoft Corp.
    # This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
    # This file contains the mappings of IP addresses to host names. Each
    # entry should be kept on an individual line. The IP address should
    # be placed in the first column followed by the corresponding host name.
    # The IP address and the host name should be separated by at least one
    # space.
    # Additionally, comments (such as these) may be inserted on individual
    # lines or following the machine name denoted by a '#' symbol.
    # For example:
    # 102.54.94.97 rhino.acme.com # source server
    # 38.25.63.10 x.acme.com # x client host
    127.0.0.1 localhost
    192.168.110.250 IBM-6AB1330E158
    ==> Note that I did not add the domain name to the entry I created since I am not part of a domain, I also used the format I found in the etc/hosts file which is:
    IP_address hostname.domainname
    - not -
    IP_address hostname.domainname hostname
    Which is the format recommended in the Oracle 10G pre-installation instructions; this does leave me wondering which format is correct...
    Thanks in Advance for any help,
    ADG13

    I have not. I am hoping someone (maybe even from Oracle support) will step up and officially tell us we are either right or wrong in the way we are approaching this. From the research I have done on the internet it sounds like this should work, you should be able to have Oracle starting and running fine whether you boot connected to the LAN or not, assuming you have created the MS loopback adapter, assigned it a static IP, and changed the hostname entry in etc/hosts file as part of the 10G WinXP recommended pre-installation instructions.
    And yet I find I have to start Oracle when I am not connected to the LAN or the services will not start correctly. If this is a "feature" then hopefully someone will tell us and maybe give us a workaround or give us an idea if this will be addressed in a future release. Having said that and in fairness to the Oracle product; being a developer I have other products installed on my machine that have special networking setup needs also, and in my case this could be exasperating or even possibly causing this Oracle problem I am having. To be specific I have software for 2 different VPNs installed so I can tunnel into 2 private networks. One of these VPNs require me to make use of a DNS Suffix (as shown below) which might be contributing to my problems, not sure. I also have VMWare installed which uses it own network adapters when it is running, so you can see how things could get a little hairy... at any rate, there is my 2 cents worth (or is that 5 cents? : )
    fwiw,
    ADG13
    C:\Documents and Settings\Administrator>ipconfig/all
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : IBM-6AB1330E158
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : ibm.com
    Ethernet adapter Local Area Connection 2:
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Microsoft Loopback Adapter
    Physical Address. . . . . . . . . : 02-00-4C-4F-4F-50
    Dhcp Enabled. . . . . . . . . . . : No
    IP Address. . . . . . . . . . . . : 192.168.110.250
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . :
    Ethernet adapter Local Area Connection:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . . . : Intel(R) PRO/1000 MT Mobile Connection
    Physical Address. . . . . . . . . : 00-11-25-13-96-AF
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 192.168.1.102
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Default Gateway . . . . . . . . . : 192.168.1.1
    DHCP Server . . . . . . . . . . . : 192.168.1.1
    DNS Servers . . . . . . . . . . . : 65.24.7.3
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 3:40:08 AM
    Lease Expires . . . . . . . . . . : Thursday, January 12, 2006 3:40:08 AM
    Ethernet adapter AGN Virtual Network Adapter:
    Connection-specific DNS Suffix . : ibm.com
    Description . . . . . . . . . . . : AGN Virtual Network Adapter
    Physical Address. . . . . . . . . : 00-00-00-00-00-01
    Dhcp Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    IP Address. . . . . . . . . . . . : 9.49.217.159
    Subnet Mask . . . . . . . . . . . : 255.255.255.255
    Default Gateway . . . . . . . . . :
    DHCP Server . . . . . . . . . . . : 9.49.217.159
    DNS Servers . . . . . . . . . . . : 9.0.2.1
    9.0.3.1
    Lease Obtained. . . . . . . . . . : Wednesday, January 11, 2006 8:06:20 AM
    Lease Expires . . . . . . . . . . : Monday, January 18, 2038 10:14:07 PM

  • My MacBook Pro has slowed to a crawl.  It started when I was printing off the Internet.  Now I get the spinning circle in just about every move.  Any help?

    My MacBook Pro has slowed to a crawl.  It started when I was printing off the internet.  Now I get a "spinning ball" with many actions.  Any help?

    Try your fellow MacBook Pro owners forum -
    MacBook Pro
    Support:
    http://www.apple.com/support/macbookpro
    Latest (manual) downloads from Apple (but check vendor sites also for scanners, printers etc) and  rule out a bad cable as well.
    Apple Downloads

  • Error code: MobileMe Services has encountered a problem and needs to close - I get this message everytime i open Outlook and it slows down opening?  This problem started when itunes updated

    Error code: MobileMe Services has encountered a problem and needs to close
    I get this mesage everytime i open Outlook and it slows down opening. This problem started when itunes updated. What do I do to solve this?

    Hi turingtest2 (you pass, BTW):  Thanks for the speedy reply.  MobileMe doesn't appear in the list of programs which can be uninstalled.  I tried the link you suggest: http://support.microsoft.com/mats/Program_Install_and_Uninstall but when I tried to "Run Now", I get the error message:  " Troubleshooting cannot continue because an error has occurred... etc.... [code 80072F8F]"  So googled this error & found a tool called (80072f8f) Repair Tool   -  I'm leery to download yet more stuff from non-microsoft sites -- any recommendations?

  • My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever...

    My ipod keeps searching for network, even when the network info is all set properly. It has suddenly started doing this. Also, buffering forever... I have tried to reset the network few times, but not working.

    Hello Nazer_502,
    I would be concerned too if my iPhone was acting this way.  It sounds like it is overheating and not holding a charge. I recommend following the steps listed below when experiencing an issue like this:
    Battery life seems short
    Click ( www.apple.com/batteries/iphone.html) for tips on how to prolong iPhone's battery life.
    Try turning iPhone off and then on again.
    Connect iPhone to iTunes and restore iPhone.
    If the screen shows a low-battery image, the battery is low on power and needs to charge for up to ten minutes before you can use it.
    When charging iPhone, make sure to leave it charging until it is fully charged. You'll know the battery is fully charged when the battery icon in the upper-right corner of the screen looks like this .
    Note: When charging using a computer, don't connect iPhone to a keyboard. Also, the computer must be turned on and not in sleep or standby mode. If iPhone is connected to a computer that's not turned on or is in sleep or standby mode, the iPhone battery may drain.
    You can find the full article here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Network traffic only happens when mouse cursor moving

    Network traffic only happens when mouse cursor is moving over Firefox window. It's even stopping me sending this message! Doesn't affect 32-bit XP machine.

    -> [[Troubleshooting extensions and themes]]
    -> Clear Cookies & Cache
    * https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    -> [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
    -> Also try the suggestions mentioned in the following articles:
    * [[Firefox cannot load websites but other programs can]]
    * [[Firefox never finishes loading certainwebsites#w_lower-the-max-number-of-http-connections|Lower the max number of HTTP connections]]
    Check and tell if its working.

  • CPU 100%, network traffic light

    My setup:
    Xserve G4, 2 Gb RAM
    OSX Server 10.4.11
    In recent days, the server CPU is maxed out as shown by the graphs in Server Admin. Our network traffic is fairly light as shown by the graph.
    I run:
    top -o cpu
    Processes: 71 total, 7 running, 64 sleeping... 197 threads 08:35:30
    Load Avg: 7.69, 6.83, 6.10 CPU usage: 82.6% user, 17.4% sys, 0.0% idle
    SharedLibs: num = 134, resident = 22.1M code, 3.04M data, 6.75M LinkEdit
    MemRegions: num = 9369, resident = 270M + 6.72M private, 44.1M shared
    PhysMem: 113M wired, 141M active, 824M inactive, 1.05G used, 711M free
    VM: 4.36G + 85.0M 26950(0) pageins, 0(0) pageouts
    PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
    15923 httpd 19.2% 0:01.98 1 12 249 6.91M+ 19.5M 11.7M+ 72.4M+
    15867 httpd 18.0% 0:05.45 1 12 275 14.0M+ 19.4M 18.8M+ 79.4M+
    15926 httpd 17.5% 0:01.57 1 12 247 6.38M+ 19.5M 11.0M+ 71.9M+
    15922 httpd 17.4% 0:02.01 1 12 257 9.51M+ 19.5M 14.3M+ 74.9M+
    15870 httpd 9.9% 0:13.47 1 12 275 13.8M+ 19.5M 18.7M+ 79.1M+
    15917 top 7.6% 0:05.40 1 26 22 1.17M 448K 1.59M 27.0M
    15871 httpd 7.4% 0:13.82 1 12 274 13.8M+ 19.5M 18.8M+ 79.1M+
    269 mysqld 1.5% 2:47:51 29 150 134 29.6M- 5.48M 33.3M- 132M-
    0 kernel_tas 0.4% 5:11.65 43 2 2532 19.4M 0K 96.5M 1.11G
    106 lookupd 0.1% 1:27.48 6 44 53 4.23M+ 1020K 4.98M+ 33.6M+
    102 SecurityAg 0.1% 1:34.08 1 69 99 1.76M 7.10M 8.66M 116M
    48 memberd 0.0% 1:20.43 3 22 24 268K 412K 628K 27.7M
    15650 sshd 0.0% 0:00.42 1 11 42 108K 1.62M 496K 30.0M
    38 netinfod 0.0% 0:21.80 1 14 22 208K 524K 572K 26.9M
    63 WindowServ 0.0% 0:14.16 2 67 56 588K 4.97M 5.02M 92.2M
    52 notifyd 0.0% 0:10.16 2 79 21 204K 416K 468K 27.2M
    120 ntpd 0.0% 0:04.63 1 11 19 192K 608K 412K 27.1M
    298 httpd 0.0% 0:06.42 1 10 229 104K 19.5M 7.00M 79.8M
    272 serialnumb 0.0% 0:00.96 3 27 32 308K 800K 1.08M 28.3M
    15921 httpd 0.0% 0:01.17 1 12 277 14.3M 19.5M 18.6M 79.9M
    15920 httpd 0.0% 0:01.19 1 13 277 14.3M 19.5M 18.7M 79.9M
    15919 httpd 0.0% 0:01.23 1 12 274 13.8M 19.5M 18.3M 79.2M
    15918 httpd 0.0% 0:01.44 1 13 229 1.66M 19.5M 6.32M 67.1M
    15900 httpd 0.0% 0:06.63 1 12 277 14.4M 19.5M 19.2M 79.9M
    15881 trivial-re 0.0% 0:00.01 1 16 19 200K 512K 760K 26.7M
    15869 httpd 0.0% 0:11.61 1 12 275 13.9M 19.5M 18.6M 79.4M
    15868 httpd 0.0% 0:09.79 1 12 274 13.8M 19.5M 18.9M 79.1M
    15852 servermgrd 0.0% 0:01.47 4 61 169 4.30M 3.86M 7.28M 46.4M
    15824 pickup 0.0% 0:00.01 1 16 20 204K 500K 700K 26.7M
    15651 bash 0.0% 0:00.04 1 14 17 200K 896K 820K 27.2M
    15643 sshd 0.0% 0:00.12 1 18 43 128K 1.62M 1.36M 30.1M
    348 slpd 0.0% 0:00.40 6 31 34 260K 908K 968K 30.2M
    305 httpd 0.0% 66:38.29 1 13 237 3.14M 19.4M 9.52M 68.3M
    304 httpd 0.0% 66:09.95 1 13 278 15.1M 19.4M 21.0M 80.3M
    303 httpd 0.0% 68:59.73 1 13 234 3.17M 19.4M 9.29M 68.3M
    302 httpd 0.0% 66:02.83 1 13 281 15.3M 19.4M 20.8M 80.0M
    301 httpd 0.0% 68:12.51 1 13 281 15.6M 19.4M 21.4M 81.0M
    300 rotatelogs 0.0% 0:00.02 1 14 18 136K 380K 360K 26.6M
    299 rotatelogs 0.0% 0:04.57 1 14 18 140K 380K 364K 26.6M
    285 mds 0.0% 0:00.05 6 71 46 556K 1.37M 1.88M 40.8M
    217 sh 0.0% 0:00.04 1 14 18 188K 812K 720K 27.2M
    207 getty 0.0% 0:00.00 1 14 18 112K 388K 332K 26.6M
    164 crashrepor 0.0% 0:00.00 1 17 18 120K 384K 200K 26.6M
    150 automount 0.0% 0:00.02 3 40 30 312K 932K 1.05M 28.7M
    146 automount 0.0% 0:00.03 3 42 34 312K 968K 1.09M 29.0M
    143 rpc.lockd 0.0% 0:00.00 1 10 18 108K 432K 192K 26.7M
    134 nfsiod 0.0% 0:00.00 5 30 25 128K 376K 180K 28.6M
    101 authorizat 0.0% 0:00.05 1 31 27 368K 940K 1.21M 27.4M
    98 mcxd 0.0% 0:02.21 1 41 39 608K 1.26M 2.23M 69.1M
    95 loginwindo 0.0% 0:00.25 3 101 90 904K 2.04M 3.25M 102M
    Not sure where to start diagnosing this issu

    Camelot,
    Thanks again for your response!
    Camelot wrote:
    You shouldn't need to do that - what happens when you try?
    Safari can't connect to the server "localhost".
    The only thing I can think of off-hand that would cause this is if mod_status was disabled (which you might have done thinking you didn't need it). It would be a good idea to re-enable this, even if only short-term, to get an idea of what's going on.
    mod_status is not listed in Web > Modules
    Not sure if it will help significantly but I did enable the query cache for MySQL.
    The query cache will generally help reduce load on the database server, but only if there's sufficient RAM on the server to cache the queries and results. The real question is how mush RAM is your system using? If it's out of memory then enabling the query cache can be detrimental.
    For that matter, do your sites seem slow? Is your only concern the relatively high CPU load? or are pages loading slowly, too?
    The pages are taking exceptionally long to load.
    The 1.7 Gb Ram...Yes, it's a config of 512-512-512-256.
    Swapping that 256MB for a 512MB seems like a no-brainer, no matter what else you do. It'll cost you $20 from OWC.
    You're right...no brainer. Will do
    Was wondering if a permissions issue could create the problems I'm having with Apache?
    Unlikely. If apache didn't have permission to serve a file it would throw an error page back pretty quickly. I can't see this is the cause, but a quick look at apache's error log will tell you if there are any permission issues.
    The site was running well this morning but as bloggers logged into Wordpress and general traffic picked up, the CPU load ramped up to 100% and pages are now loading very slowly.

  • Very slow network throughput since 2-3 days ago

    I've been having very slow network throughput since 2-3 days ago, with no apparent reason.
    I see (from what I can tell) no relevant package updates during that period.
    Connections are nfs v3 shares, over UTP cat5e gigabit ethernet.
    I've been running this setup for many years now, without such issues.
    But now, it's as if throughput is capped around 100Mbps.
    Is there a way to see - if for some reason - a network adapter has locked to 100Mbps, instead of 1Gbps?
    ifconfig does not say anything.
    PS: netstat -i does not report any errors over the connection.
    Last edited by wantilles (2011-04-12 15:25:52)

    experiencing the same issue with my wlan0 since update to kernel2.6.38 yesterday night.
    Speed tests grant me a download speed of around 50kbps. Should be around some mbit though! How do I find out, why it's acting so slow?
    edit: switched to win7 for the moment. Everything is speedy and normal around here. Something is seriously broken in my arch box!
    Can this be related to xorg-server1.10.902 or kernel2.6.38? It would also explain the strange issues with pacman lately (like this https://bbs.archlinux.org/viewtopic.php?id=116429 or this https://bbs.archlinux.org/viewtopic.php?id=116696).
    More people seem to experience the network issue: https://bbs.archlinux.org/viewtopic.php?id=116738
    Any insights?
    edit#2: Just got back from win7. Upload speed in Arch is quite okay. Download speed is extremely fucked though. I wonder why? At least now I know why pacman has problems getting package upgrades, etc.
    How do I fix a problem with the wlan0 connection? Haven't had any of those before with gnome and Networkmanager. I'm using the ath9k module.
    My rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    HARDWARECLOCK="localtime"
    USEDIRECTISA="no"
    TIMEZONE="Europe/Berlin"
    KEYMAP="de"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    MODULES=(ath9k snd_hda_intel snd_hda_codec snd_hda_codec_idt snd_hwdep snd_pcm snd_seq snd_seq_device snd_timer fuse nvidia loop vboxdrv !vboxnetflt !vboxnetadp !vboxguest !vboxsf vboxvideo acpi_cpufreq cpufreq_powersave cpufreq_ondemand !snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp wacom)
    #MODULES=(!snd_mixer_oss !snd_seq_oss !snd_pcm_oss !snd_pcsp !vboxnetflt !vboxnetadp !vboxguest !vboxsf)
    #MODULES=()
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="davelab"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    # vboxnetflt
    eth0="eth0 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(!eth0 !wlan0 !lo)
    #WIRELESS_INTERFACE="wlan0"
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng laptop-mode cpufreq dbus !hal networkmanager !fam !avahi-daemon samba !smbnetfs cups !webmin alsa !mpd crond bluetooth xinetd sensors clamav ntpd !privoxy !tor httpd !tomcat7 mysqld !iptables)
    dmesg output:
    Initializing cgroup subsys cpuset
    Initializing cgroup subsys cpu
    Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 (GCC) ) #1 SMP PREEMPT Wed Mar 30 08:47:36 CEST 2011
    Command line: root=/dev/sda3 ro resume=/dev/sda3 5
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000008fec0000 (usable)
    BIOS-e820: 000000008fec0000 - 000000008fecf000 (ACPI data)
    BIOS-e820: 000000008fecf000 - 000000008fee5000 (ACPI NVS)
    BIOS-e820: 000000008fee5000 - 00000000a0000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000160000000 (usable)
    NX (Execute Disable) protection: active
    DMI present.
    DMI: Dell Inc. Studio XPS 1340/ , BIOS A14 03/25/2010
    e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    No AGP bridge found
    last_pfn = 0x160000 max_arch_pfn = 0x400000000
    MTRR default type: uncachable
    MTRR fixed ranges enabled:
    00000-9FFFF write-back
    A0000-BFFFF uncachable
    C0000-C7FFF write-protect
    C8000-DBFFF uncachable
    DC000-EFFFF write-through
    F0000-FFFFF write-back
    MTRR variable ranges enabled:
    0 base 0A0000000 mask FE0000000 uncachable
    1 base 0C0000000 mask FC0000000 uncachable
    2 base 000000000 mask F00000000 write-back
    3 base 100000000 mask FC0000000 write-back
    4 base 140000000 mask FE0000000 write-back
    5 base 09FF00000 mask FFFF00000 uncachable
    6 disabled
    7 disabled
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    e820 update range: 000000009ff00000 - 0000000100000000 (usable) ==> (reserved)
    last_pfn = 0x8fec0 max_arch_pfn = 0x400000000
    found SMP MP-table at [ffff8800000f7b50] f7b50
    initial memory mapped : 0 - 20000000
    init_memory_mapping: 0000000000000000-000000008fec0000
    0000000000 - 008fe00000 page 2M
    008fe00000 - 008fec0000 page 4k
    kernel direct mapping tables up to 8fec0000 @ 8febb000-8fec0000
    init_memory_mapping: 0000000100000000-0000000160000000
    0100000000 - 0160000000 page 2M
    kernel direct mapping tables up to 160000000 @ 15fff9000-160000000
    RAMDISK: 37e56000 - 37ff0000
    ACPI: RSDP 00000000000f7b20 00024 (v02 PTLTD )
    ACPI: XSDT 000000008fec37f6 000A4 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: FACP 000000008fecec04 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
    ACPI: DSDT 000000008fec5388 09808 (v01 NVIDIA MCP79 06040000 MSFT 03000001)
    ACPI: FACS 000000008fee4fc0 00040
    ACPI: MCFG 000000008fececf8 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
    ACPI: HPET 000000008feced34 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
    ACPI: APIC 000000008feced6c 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    ACPI: BOOT 000000008fecedde 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    ACPI: SLIC 000000008fecee06 00176 (v01 DELL QA09 06040000 LTP 00000000)
    ACPI: OSFR 000000008fecef7c 00084 (v01 DELL DELL 06040000 ASL 00000061)
    ACPI: SSDT 000000008fec5129 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec5083 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4fdd 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4f37 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4e91 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4deb 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4d45 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec4c9f 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
    ACPI: SSDT 000000008fec389a 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
    ACPI: Local APIC address 0xfee00000
    No NUMA configuration found
    Faking a node at 0000000000000000-0000000160000000
    Initmem setup node 0 0000000000000000-0000000160000000
    NODE_DATA [000000015fffb000 - 000000015fffffff]
    [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff88015c200000-ffff88015f7fffff] on node 0
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    DMA32 0x00001000 -> 0x00100000
    Normal 0x00100000 -> 0x00160000
    Movable zone start PFN for each node
    early_node_map[3] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x0008fec0
    0: 0x00100000 -> 0x00160000
    On node 0 totalpages: 982605
    DMA zone: 56 pages used for memmap
    DMA zone: 6 pages reserved
    DMA zone: 3919 pages, LIFO batch:0
    DMA32 zone: 14280 pages used for memmap
    DMA32 zone: 571128 pages, LIFO batch:31
    Normal zone: 5376 pages used for memmap
    Normal zone: 387840 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x10dea301 base: 0xfed00000
    SMP: Allowing 2 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 40
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    PM: Registered nosave memory: 00000000000d4000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    PM: Registered nosave memory: 000000008fec0000 - 000000008fecf000
    PM: Registered nosave memory: 000000008fecf000 - 000000008fee5000
    PM: Registered nosave memory: 000000008fee5000 - 00000000a0000000
    PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000
    PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
    PM: Registered nosave memory: 00000000fec10000 - 00000000fee00000
    PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    PM: Registered nosave memory: 00000000fee01000 - 00000000fff80000
    PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
    Allocating PCI resources starting at a0000000 (gap: a0000000:40000000)
    Booting paravirtualized kernel on bare hardware
    setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    PERCPU: Embedded 28 pages/cpu @ffff88008fc00000 s82176 r8192 d24320 u1048576
    pcpu-alloc: s82176 r8192 d24320 u1048576 alloc=1*2097152
    pcpu-alloc: [0] 0 1
    Built 1 zonelists in Node order, mobility grouping on. Total pages: 962887
    Policy zone: Normal
    Kernel command line: root=/dev/sda3 ro resume=/dev/sda3 5
    PID hash table entries: 4096 (order: 3, 32768 bytes)
    Checking aperture...
    No AGP bridge found
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 3798920k/5767168k available (3795k kernel code, 1836748k absent, 131500k reserved, 2307k data, 556k init)
    SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Preemptable hierarchical RCU implementation.
    RCU-based detection of stalled CPUs is disabled.
    Verbose stalled-CPUs detection is disabled.
    NR_IRQS:2304
    Extended CMOS year: 2000
    spurious 8259A interrupt: IRQ7.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    allocated 39321600 bytes of page_cgroup
    please try 'cgroup_disable=memory' option if you don't want memory cgroups
    hpet clockevent registered
    Fast TSC calibration using PIT
    Detected 2400.376 MHz processor.
    Calibrating delay loop (skipped), value calculated using timer frequency.. 4802.78 BogoMIPS (lpj=8001253)
    pid_max: default: 32768 minimum: 301
    Security Framework initialized
    AppArmor: AppArmor disabled by boot time parameter
    Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Mount-cache hash table entries: 256
    Initializing cgroup subsys ns
    ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    Initializing cgroup subsys cpuacct
    Initializing cgroup subsys memory
    Initializing cgroup subsys devices
    Initializing cgroup subsys freezer
    Initializing cgroup subsys net_cls
    Initializing cgroup subsys blkio
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    mce: CPU supports 6 MCE banks
    CPU0: Thermal monitoring handled by SMI
    using mwait in idle threads.
    ACPI: Core revision 20110112
    Setting APIC routing to flat
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
    Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    ... version: 2
    ... bit width: 40
    ... generic registers: 2
    ... value mask: 000000ffffffffff
    ... max period: 000000007fffffff
    ... fixed-purpose events: 3
    ... event mask: 0000000700000003
    NMI watchdog enabled, takes one hw-pmu counter.
    Booting Node 0, Processors #1 Ok.
    CPU1: Thermal monitoring handled by SMI
    NMI watchdog enabled, takes one hw-pmu counter.
    Brought up 2 CPUs
    Total of 2 processors activated (9604.67 BogoMIPS).
    devtmpfs: initialized
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
    PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in E820
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: SSDT 000000008fee1086 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0021F (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee1648 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
    ACPI: SSDT 000000008fee0ed6 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 001B0 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
    ACPI: SSDT 000000008fee15c3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Dynamic OEM Table Load:
    ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x47, I/O: command/status = 0x66, data = 0x62
    ACPI: No dock devices found.
    HEST: Table not found.
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
    pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
    pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
    pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfebfffff]
    pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
    pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
    pci 0000:00:03.0: [10de:0aae] type 0 class 0x000601
    pci 0000:00:03.0: reg 10: [io 0x1c00-0x1cff]
    pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
    pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
    pci 0000:00:03.2: reg 10: [io 0x3080-0x30bf]
    pci 0000:00:03.2: reg 20: [io 0x3040-0x307f]
    pci 0000:00:03.2: reg 24: [io 0x2000-0x203f]
    pci 0000:00:03.2: PME# supported from D3hot D3cold
    pci 0000:00:03.2: PME# disabled
    pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
    pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
    pci 0000:00:03.5: reg 10: [mem 0xf0600000-0xf067ffff]
    pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
    pci 0000:00:04.0: reg 10: [mem 0xf0886000-0xf0886fff]
    pci 0000:00:04.0: supports D1 D2
    pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.0: PME# disabled
    pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
    pci 0000:00:04.1: reg 10: [mem 0xf0889000-0xf08890ff]
    pci 0000:00:04.1: supports D1 D2
    pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:04.1: PME# disabled
    pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
    pci 0000:00:06.0: reg 10: [mem 0xf0887000-0xf0887fff]
    pci 0000:00:06.0: supports D1 D2
    pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
    pci 0000:00:06.1: reg 10: [mem 0xf0889400-0xf08894ff]
    pci 0000:00:06.1: supports D1 D2
    pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:06.1: PME# disabled
    pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
    pci 0000:00:08.0: reg 10: [mem 0xf0880000-0xf0883fff]
    pci 0000:00:08.0: PME# supported from D3hot D3cold
    pci 0000:00:08.0: PME# disabled
    pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
    pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200
    pci 0000:00:0a.0: reg 10: [mem 0xf0888000-0xf0888fff]
    pci 0000:00:0a.0: reg 14: [io 0x30d0-0x30d7]
    pci 0000:00:0a.0: reg 18: [mem 0xf0889c00-0xf0889cff]
    pci 0000:00:0a.0: reg 1c: [mem 0xf0889800-0xf088980f]
    pci 0000:00:0a.0: supports D1 D2
    pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0a.0: PME# disabled
    pci 0000:00:0b.0: [10de:0ab9] type 0 class 0x000106
    pci 0000:00:0b.0: reg 10: [io 0x30e8-0x30ef]
    pci 0000:00:0b.0: reg 14: [io 0x30dc-0x30df]
    pci 0000:00:0b.0: reg 18: [io 0x30e0-0x30e7]
    pci 0000:00:0b.0: reg 1c: [io 0x30d8-0x30db]
    pci 0000:00:0b.0: reg 20: [io 0x30c0-0x30cf]
    pci 0000:00:0b.0: reg 24: [mem 0xf0884000-0xf0885fff]
    pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
    pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:0c.0: PME# disabled
    pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
    pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:15.0: PME# disabled
    pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:16.0: PME# disabled
    pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:17.0: PME# disabled
    pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
    pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:18.0: PME# disabled
    pci 0000:01:07.0: [1180:0832] type 0 class 0x000c00
    pci 0000:01:07.0: proprietary Ricoh MMC controller disabled (via firewire function)
    pci 0000:01:07.0: MMC cards are now supported by standard SDHCI controller
    pci 0000:01:07.0: reg 10: [mem 0xf0500000-0xf05007ff]
    pci 0000:01:07.0: supports D1 D2
    pci 0000:01:07.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.0: PME# disabled
    pci 0000:01:07.1: [1180:0822] type 0 class 0x000805
    pci 0000:01:07.1: reg 10: [mem 0xf0500800-0xf05008ff]
    pci 0000:01:07.1: supports D1 D2
    pci 0000:01:07.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.1: PME# disabled
    pci 0000:01:07.2: [1180:0592] type 0 class 0x000880
    pci 0000:01:07.2: reg 10: [mem 0xf0501000-0xf05010ff]
    pci 0000:01:07.2: supports D1 D2
    pci 0000:01:07.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.2: PME# disabled
    pci 0000:01:07.3: [1180:0852] type 0 class 0x000880
    pci 0000:01:07.3: reg 10: [mem 0xf0501400-0xf05014ff]
    pci 0000:01:07.3: supports D1 D2
    pci 0000:01:07.3: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:01:07.3: PME# disabled
    pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
    pci 0000:00:09.0: bridge window [mem 0xa0000000-0xfebfffff] (subtractive decode)
    pci 0000:02:00.0: [10de:06e8] type 0 class 0x000300
    pci 0000:02:00.0: reg 10: [mem 0xae000000-0xaeffffff]
    pci 0000:02:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:02:00.0: reg 1c: [mem 0xac000000-0xadffffff 64bit]
    pci 0000:02:00.0: reg 24: [io 0x4000-0x407f]
    pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: [10de:0866] type 0 class 0x000300
    pci 0000:03:00.0: reg 10: [mem 0xaa000000-0xaaffffff]
    pci 0000:03:00.0: reg 14: [mem 0xb0000000-0xbfffffff 64bit pref]
    pci 0000:03:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit pref]
    pci 0000:03:00.0: reg 24: [io 0x5000-0x507f]
    pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:06:00.0: [168c:002a] type 0 class 0x000280
    pci 0000:06:00.0: reg 10: [mem 0xf0400000-0xf040ffff 64bit]
    pci 0000:06:00.0: supports D1
    pci 0000:06:00.0: PME# supported from D0 D1 D3hot
    pci 0000:06:00.0: PME# disabled
    pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
    pci0000:00: Requesting ACPI _OSC control (0x1d)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Q] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z00R] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00S] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00T] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00U] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00V] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00W] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00X] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Y] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00Z] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z010] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z011] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z012] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z013] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z014] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z015] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z016] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z017] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z018] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z019] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01A] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [Z01B] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01C] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01D] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01E] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [Z01F] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01G] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z01H] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LUS0] (IRQs 18 19 20 21 22 23) *7
    ACPI: PCI Interrupt Link [LUS2] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LMAC] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LAZA] (IRQs 17) *11
    ACPI: PCI Interrupt Link [LGPU] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [LPID] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [LSI0] (IRQs 18 19 20 21 22 23) *11
    ACPI: PCI Interrupt Link [LSI1] (IRQs 18 19 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [Z00O] (IRQs 18 19 20 21 22 23) *5
    ACPI: PCI Interrupt Link [Z00P] (IRQs 18 19 20 21 22 23) *10
    ACPI: PCI Interrupt Link [LPMU] (IRQs 18 19 20 21 22 23) *10
    vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
    vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
    vgaarb: loaded
    PCI: Using ACPI for IRQ routing
    PCI: pci_cache_line_size set to 64 bytes
    reserve RAM buffer: 000000000009dc00 - 000000000009ffff
    reserve RAM buffer: 000000008fec0000 - 000000008fffffff
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
    hpet0: 4 comparators, 64-bit 25.000000 MHz counter
    Switching to clocksource hpet
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: [mem 0xffc00000-0xffffffff]
    pnp 00:00: [mem 0xfec00000-0xfec00fff]
    pnp 00:00: [mem 0xfee00000-0xfeefffff]
    pnp 00:00: [mem 0xfed00000-0xfed00fff]
    system 00:00: [mem 0xffc00000-0xffffffff] could not be reserved
    system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
    system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
    system 00:00: [mem 0xfed00000-0xfed00fff] has been reserved
    system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    pnp 00:01: [bus 00-ff]
    pnp 00:01: [io 0x0cf8-0x0cff]
    pnp 00:01: [io 0x0000-0x0cf7 window]
    pnp 00:01: [io 0x0d00-0xffff window]
    pnp 00:01: [mem 0x000a0000-0x000bffff window]
    pnp 00:01: [mem 0x000c0000-0x000c3fff window]
    pnp 00:01: [mem 0x000c4000-0x000c7fff window]
    pnp 00:01: [mem 0x000c8000-0x000cbfff window]
    pnp 00:01: [mem 0x000cc000-0x000cffff window]
    pnp 00:01: [mem 0x000d0000-0x000d3fff window]
    pnp 00:01: [mem 0x000d4000-0x000d7fff window]
    pnp 00:01: [mem 0x000d8000-0x000dbfff window]
    pnp 00:01: [mem 0x000dc000-0x000dffff window]
    pnp 00:01: [mem 0x000e0000-0x000e3fff window]
    pnp 00:01: [mem 0x000e4000-0x000e7fff window]
    pnp 00:01: [mem 0x000e8000-0x000ebfff window]
    pnp 00:01: [mem 0x000ec000-0x000effff window]
    pnp 00:01: [mem 0x000f0000-0x000fffff window]
    pnp 00:01: [mem 0xa0000000-0xfebfffff window]
    pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    pnp 00:02: [irq 0 disabled]
    pnp 00:02: [irq 8]
    pnp 00:02: [mem 0xfed00000-0xfed003ff]
    pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
    pnp 00:03: [mem 0xf0600000-0xf0607fff]
    pnp 00:03: disabling [mem 0xf0600000-0xf0607fff] because it overlaps 0000:00:03.5 BAR 0 [mem 0xf0600000-0xf067ffff]
    system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:04: [io 0x1000-0x107f]
    pnp 00:04: [io 0x1080-0x10ff]
    pnp 00:04: [io 0x1400-0x147f]
    pnp 00:04: [io 0x1480-0x14ff]
    pnp 00:04: [io 0x1800-0x187f]
    pnp 00:04: [io 0x1880-0x18ff]
    system 00:04: [io 0x1000-0x107f] has been reserved
    system 00:04: [io 0x1080-0x10ff] has been reserved
    system 00:04: [io 0x1400-0x147f] has been reserved
    system 00:04: [io 0x1480-0x14ff] has been reserved
    system 00:04: [io 0x1800-0x187f] has been reserved
    system 00:04: [io 0x1880-0x18ff] has been reserved
    system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:05: [io 0x0060]
    pnp 00:05: [io 0x0064]
    pnp 00:05: [irq 1]
    pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
    pnp 00:06: [irq 12]
    pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
    Switched to NOHz mode on CPU #0
    Switched to NOHz mode on CPU #1
    pnp 00:07: [io 0x0010-0x001f]
    pnp 00:07: [io 0x0022-0x003f]
    pnp 00:07: [io 0x0044-0x005f]
    pnp 00:07: [io 0x0072-0x0073]
    pnp 00:07: [io 0x0074-0x007f]
    pnp 00:07: [io 0x0091-0x0093]
    pnp 00:07: [io 0x0097-0x009f]
    pnp 00:07: [io 0x00a2-0x00bf]
    pnp 00:07: [io 0x00e0-0x00ef]
    pnp 00:07: [io 0x04d0-0x04d1]
    pnp 00:07: [io 0x0080]
    pnp 00:07: [io 0x0910-0x0911]
    pnp 00:07: [io 0x0295-0x0296]
    system 00:07: [io 0x04d0-0x04d1] has been reserved
    system 00:07: [io 0x0910-0x0911] has been reserved
    system 00:07: [io 0x0295-0x0296] has been reserved
    system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    pnp 00:08: [io 0x0000-0x0008]
    pnp 00:08: [io 0x000a-0x000f]
    pnp 00:08: [io 0x0081-0x0083]
    pnp 00:08: [io 0x0087]
    pnp 00:08: [io 0x0089-0x008b]
    pnp 00:08: [io 0x008f]
    pnp 00:08: [io 0x00c0-0x00d1]
    pnp 00:08: [io 0x00d4-0x00df]
    pnp 00:08: [dma 4]
    pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
    pnp 00:09: [io 0x0061]
    pnp 00:09: Plug and Play ACPI device, IDs PNP0800 (active)
    pnp 00:0a: [io 0x0070-0x0071]
    pnp 00:0a: Plug and Play ACPI device, IDs PNP0b00 (active)
    pnp 00:0b: [io 0x00f0-0x00f1]
    pnp 00:0b: [irq 13]
    pnp 00:0b: Plug and Play ACPI device, IDs PNP0c04 (active)
    pnp 00:0c: [io 0x0300-0x0307]
    pnp 00:0c: [irq 10]
    pnp 00:0c: Plug and Play ACPI device, IDs ITE8708 (active)
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    pci 0000:00:09.0: PCI bridge to [bus 01-01]
    pci 0000:00:09.0: bridge window [io disabled]
    pci 0000:00:09.0: bridge window [mem 0xf0500000-0xf05fffff]
    pci 0000:00:09.0: bridge window [mem pref disabled]
    pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
    pci 0000:00:0c.0: PCI bridge to [bus 02-02]
    pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
    pci 0000:00:0c.0: bridge window [mem 0xac000000-0xaeffffff]
    pci 0000:00:0c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    pci 0000:03:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
    pci 0000:00:10.0: PCI bridge to [bus 03-03]
    pci 0000:00:10.0: bridge window [io 0x5000-0x5fff]
    pci 0000:00:10.0: bridge window [mem 0xaa000000-0xaaffffff]
    pci 0000:00:10.0: bridge window [mem 0xb0000000-0xcdffffff 64bit pref]
    pci 0000:00:15.0: PCI bridge to [bus 04-05]
    pci 0000:00:15.0: bridge window [io 0x6000-0x6fff]
    pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf03fffff]
    pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
    pci 0000:00:16.0: PCI bridge to [bus 06-06]
    pci 0000:00:16.0: bridge window [io disabled]
    pci 0000:00:16.0: bridge window [mem 0xf0400000-0xf04fffff]
    pci 0000:00:16.0: bridge window [mem pref disabled]
    pci 0000:00:17.0: PCI bridge to [bus 07-07]
    pci 0000:00:17.0: bridge window [io disabled]
    pci 0000:00:17.0: bridge window [mem disabled]
    pci 0000:00:17.0: bridge window [mem pref disabled]
    pci 0000:00:18.0: PCI bridge to [bus 08-08]
    pci 0000:00:18.0: bridge window [io disabled]
    pci 0000:00:18.0: bridge window [mem disabled]
    pci 0000:00:18.0: bridge window [mem pref disabled]
    pci 0000:00:09.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z00Q] enabled at IRQ 23
    pci 0000:00:0c.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    pci 0000:00:0c.0: setting latency timer to 64
    pci 0000:00:10.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z012] enabled at IRQ 22
    pci 0000:00:15.0: PCI INT A -> Link[Z012] -> GSI 22 (level, low) -> IRQ 22
    pci 0000:00:15.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z016] enabled at IRQ 21
    pci 0000:00:16.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    pci 0000:00:16.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01A] enabled at IRQ 20
    pci 0000:00:17.0: PCI INT A -> Link[Z01A] -> GSI 20 (level, low) -> IRQ 20
    pci 0000:00:17.0: setting latency timer to 64
    ACPI: PCI Interrupt Link [Z01E] enabled at IRQ 19
    pci 0000:00:18.0: PCI INT A -> Link[Z01E] -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:18.0: setting latency timer to 64
    pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:00: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
    pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
    pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
    pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
    pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
    pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
    pci_bus 0000:01: resource 10 [mem 0x000cc000-0x000cffff]
    pci_bus 0000:01: resource 11 [mem 0x000d0000-0x000d3fff]
    pci_bus 0000:01: resource 12 [mem 0x000d4000-0x000d7fff]
    pci_bus 0000:01: resource 13 [mem 0x000d8000-0x000dbfff]
    pci_bus 0000:01: resource 14 [mem 0x000dc000-0x000dffff]
    pci_bus 0000:01: resource 15 [mem 0x000e0000-0x000e3fff]
    pci_bus 0000:01: resource 16 [mem 0x000e4000-0x000e7fff]
    pci_bus 0000:01: resource 17 [mem 0x000e8000-0x000ebfff]
    pci_bus 0000:01: resource 18 [mem 0x000ec000-0x000effff]
    pci_bus 0000:01: resource 19 [mem 0x000f0000-0x000fffff]
    pci_bus 0000:01: resource 20 [mem 0xa0000000-0xfebfffff]
    pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    pci_bus 0000:02: resource 1 [mem 0xac000000-0xaeffffff]
    pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    pci_bus 0000:03: resource 1 [mem 0xaa000000-0xaaffffff]
    pci_bus 0000:03: resource 2 [mem 0xb0000000-0xcdffffff 64bit pref]
    pci_bus 0000:04: resource 0 [io 0x6000-0x6fff]
    pci_bus 0000:04: resource 1 [mem 0xf0200000-0xf03fffff]
    pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
    pci_bus 0000:06: resource 1 [mem 0xf0400000-0xf04fffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 524288 bind 65536)
    TCP reno registered
    UDP hash table entries: 2048 (order: 4, 65536 bytes)
    UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    NET: Registered protocol family 1
    pci 0000:03:00.0: Boot video device
    PCI: CLS 64 bytes, default 64
    Unpacking initramfs...
    Freeing initrd memory: 1640k freed
    PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    Placing 64MB software IO TLB between ffff88008bc00000 - ffff88008fc00000
    software IO TLB at phys 0x8bc00000 - 0x8fc00000
    Simple Boot Flag at 0x36 set to 0x1
    audit: initializing netlink socket (disabled)
    type=2000 audit(1302716230.603:1): initialized
    HugeTLB registered 2 MB page size, pre-allocated 0 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    msgmni has been set to 7422
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    io scheduler noop registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    intel_idle: MWAIT substates: 0x3122220
    intel_idle: does not run on family 6 model 23
    ERST: Table is not found!
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Linux agpgart interface v0.103
    i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mousedev: PS/2 mouse device common for all mice
    rtc_cmos 00:0a: RTC can wake from S4
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Registering the dns_resolver key type
    PM: Checking hibernation image partition /dev/sda3
    PM: Hibernation image not present or could not be loaded.
    registered taskstats version 1
    rtc_cmos 00:0a: setting system clock to 2011-04-13 17:37:11 UTC (1302716231)
    Initalizing network drop monitor service
    Freeing unused kernel memory: 556k freed
    udev[38]: starting version 166
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ahci 0000:00:0b.0: version 3.0
    ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 18
    ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 18 (level, low) -> IRQ 18
    ahci 0000:00:0b.0: irq 40 for MSI/MSI-X
    ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
    ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs
    ahci 0000:00:0b.0: setting latency timer to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    ata1: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884100 irq 40
    ata2: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884180 irq 40
    ata3: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884200 irq 40
    ata4: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884280 irq 40
    ata5: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884300 irq 40
    ata6: SATA max UDMA/133 abar m8192@0xf0884000 port 0xf0884380 irq 40
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
    ata2.00: configured for UDMA/133
    ata1.00: ATA-8: ST9500420ASG, 0002SDM1, max UDMA/133
    ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata1.00: configured for UDMA/133
    scsi 0:0:0:0: Direct-Access ATA ST9500420ASG 0002 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
    sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    Refined TSC clocksource calibration: 2399.988 MHz.
    Switching to clocksource tsc
    EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    udev[632]: starting version 166
    cfg80211: Calling CRDA to update world regulatory domain
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    scsi 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    cdrom: Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
    ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
    forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
    forcedeth 0000:00:0a.0: setting latency timer to 64
    dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    ath9k 0000:06:00.0: PCI INT A -> Link[Z016] -> GSI 21 (level, low) -> IRQ 21
    ath9k 0000:06:00.0: setting latency timer to 64
    input: PC Speaker as /devices/platform/pcspkr/input/input1
    forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x50ef @ 0, addr 00:22:19:f7:35:cf
    forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
    i2c i2c-0: nForce2 SMBus adapter at 0x3040
    i2c i2c-1: nForce2 SMBus adapter at 0x2000
    ath: EEPROM regdomain: 0x60
    ath: EEPROM indicates we should expect a direct regpair map
    ath: Country alpha2 being used: 00
    ath: Regpair used: 0x60
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    Registered led device: ath9k-phy0::radio
    Registered led device: ath9k-phy0::assoc
    Registered led device: ath9k-phy0::tx
    Registered led device: ath9k-phy0::rx
    ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xffffc900018c0000, irq=21
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
    ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
    ehci_hcd 0000:00:04.1: setting latency timer to 64
    ehci_hcd 0000:00:04.1: EHCI Host Controller
    ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
    input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    ACPI: Power Button [PWRB]
    input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2a/PNP0C0E:00/input/input3
    ACPI: Sleep Button [SLPB]
    input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    ehci_hcd 0000:00:04.1: debug port 1
    ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:04.1: irq 22, io mem 0xf0889000
    ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00P] enabled at IRQ 21
    ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z00P] -> GSI 21 (level, low) -> IRQ 21
    ehci_hcd 0000:00:06.1: setting latency timer to 64
    ehci_hcd 0000:00:06.1: EHCI Host Controller
    ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:06.1: debug port 1
    ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
    ehci_hcd 0000:00:06.1: irq 21, io mem 0xf0889400
    ACPI: Lid Switch [LID]
    input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    ACPI: Power Button [PWRF]
    ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    HDA Intel 0000:00:08.0: power state changed by ACPI to D0
    ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
    HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
    hda_intel: Disable MSI for Nvidia chipset
    HDA Intel 0000:00:08.0: setting latency timer to 64
    [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
    wmi: Mapper loaded
    ACPI: acpi_idle registered with cpuidle
    Monitor-Mwait will be used to enter C-1 state
    Monitor-Mwait will be used to enter C-2 state
    Monitor-Mwait will be used to enter C-3 state
    Marking TSC unstable due to TSC halts in idle
    Switching to clocksource hpet
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: EC: GPE storm detected, transactions will use polling mode
    Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
    input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    ACPI: Battery Slot [BAT0] (battery present)
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci-pci 0000:01:07.1: SDHCI controller found [1180:0822] (rev 22)
    ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
    sdhci-pci 0000:01:07.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11
    sdhci-pci 0000:01:07.1: Will use DMA mode even though HW doesn't fully claim to support it.
    Registered led device: mmc0::
    mmc0: SDHCI controller on PCI [0000:01:07.1] using DMA
    ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
    firewire_ohci 0000:01:07.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
    thermal LNXTHERM:00: registered as thermal_zone0
    ACPI: Thermal Zone [THRM] (60 C)
    ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
    ACPI: AC Adapter [ADP0] (on-line)
    usb 1-2: new high speed USB device using ehci_hcd and address 3
    input: Dell WMI hotkeys as /devices/virtual/input/input7
    acpi device:0c: registered as cooling_device2
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:00/input/input8
    ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
    [Firmware Bug]: ACPI(Z01I) defines _DOD but not _DOS
    acpi device:14: registered as cooling_device3
    input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input9
    ACPI: Video Device [Z01I] (multi-head: yes rom: yes post: no)
    usb 2-1: new high speed USB device using ehci_hcd and address 2
    firewire_core: created device fw0: GUID 424fc00010f09890, S400
    firewire_core: phy config: card 0, new root=ffc1, gap_count=5
    nvidia: module license 'NVIDIA' taints kernel.
    Disabling lock debugging due to kernel taint
    cfg80211: World regulatory domain updated:
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    usb 2-3: new high speed USB device using ehci_hcd and address 3
    usb 1-1.1: new low speed USB device using ehci_hcd and address 5
    usb 1-1.2: new full speed USB device using ehci_hcd and address 6
    usb 1-1.4: new high speed USB device using ehci_hcd and address 7
    cdc_wdm 2-1:1.5: cdc-wdm-176: USB WDM device
    cdc_wdm 2-1:1.6: cdc-wdm-175: USB WDM device
    usbcore: registered new interface driver cdc_wdm
    Initializing USB Mass Storage driver...
    cdc_acm 2-1:1.1: ttyACM0: USB ACM device
    cdc_acm 2-1:1.3: ttyACM1: USB ACM device
    scsi6 : usb-storage 1-2:1.0
    cdc_acm 2-1:1.9: ttyACM2: USB ACM device
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new interface driver cdc_acm
    cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
    scsi7 : usb-storage 1-1.4:1.0
    Linux video capture interface: v2.00
    uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a3)
    cdc_ether 2-1:1.7: wwan0: register 'cdc_ether' at usb-0000:00:06.1-1, Mobile Broadband Network Device, 02:80:37:ec:02:00
    usbcore: registered new interface driver cdc_ether
    input: Integrated Webcam as /devices/pci0000:00/0000:00:06.1/usb2/2-3/2-3:1.0/input/input10
    usbcore: registered new interface driver uvcvideo
    USB Video Class driver (v1.0.0)
    usbcore: registered new interface driver uas
    usbcore: registered new interface driver zaurus
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input11
    generic-usb 0003:046D:C52B.0003: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input0
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input12
    generic-usb 0003:046D:C52B.0004: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input1
    generic-usb 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.1-1.2/input2
    usbcore: registered new interface driver usbhid
    usbhid: USB HID core driver
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
    logitech 0003:046D:C517.0001: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input0
    logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
    input: Logitech USB Receiver as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
    logitech 0003:046D:C517.0002: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:04.1-1.1/input1
    scsi 6:0:0:0: Direct-Access Seagate FreeAgent Go 102F PQ: 0 ANSI: 4
    sd 6:0:0:0: Attached scsi generic sg2 type 0
    sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    sd 6:0:0:0: [sdb] Write Protect is off
    sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
    sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    scsi 7:0:0:0: Direct-Access Seagate FreeAgent Go 0142 PQ: 0 ANSI: 4
    sd 7:0:0:0: Attached scsi generic sg3 type 0
    sd 7:0:0:0: [sdc] 976773166 512-byte logical blocks: (500 GB/465 GiB)
    sd 7:0:0:0: [sdc] Write Protect is off
    sd 7:0:0:0: [sdc] Mode Sense: 1c 00 00 00
    sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdc: unknown partition table
    sd 7:0:0:0: [sdc] Attached SCSI disk
    sdb: unknown partition table
    sd 6:0:0:0: [sdb] Attached SCSI disk
    hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x100f0000
    hda-intel: Codec #1 probe error; disabling it...
    firewire_core: created device fw1: GUID 0001f2000001eda4, S400, 1 config ROM retries
    input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input15
    input: HDA NVidia Mic at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input16
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input17
    input: HDA NVidia HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:08.0/sound/card0/input18
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20
    ohci_hcd 0000:00:04.0: setting latency timer to 64
    ohci_hcd 0000:00:04.0: OHCI Host Controller
    ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:04.0: irq 20, io mem 0xf0886000
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 19
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    ohci_hcd 0000:00:06.0: OHCI Host Controller
    ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:06.0: irq 19, io mem 0xf0887000
    fuse init (API version 7.16)
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 18
    nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:02:00.0: enabling device (0004 -> 0007)
    nvidia 0000:02:00.0: PCI INT A -> Link[Z00Q] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:02:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
    ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 23
    nvidia 0000:03:00.0: PCI INT A -> Link[LGPU] -> GSI 23 (level, low) -> IRQ 23
    nvidia 0000:03:00.0: setting latency timer to 64
    vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 270.41.03 Sat Apr 9 00:06:19 PDT 2011
    loop: module loaded
    vboxdrv: Found 2 processor cores.
    VBoxDrv: dbg - g_abExecMemory=ffffffffa0f04d20
    vboxdrv: fAsync=0 offMin=0x1b9 offMax=0x1368
    vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
    vboxdrv: Successfully loaded version 4.0.4_OSE (interface 0x00160000).
    [drm] Initialized drm 1.1.0 20060810
    usbcore: registered new interface driver wacom
    wacom: v1.52:USB Wacom tablet driver
    usb 3-4: new full speed USB device using ohci_hcd and address 2
    hub 3-4:1.0: USB hub found
    hub 3-4:1.0: 3 ports detected
    EXT4-fs (sda3): re-mounted. Opts: (null)
    EXT4-fs (sda3): re-mounted. Opts: (null)
    usb 3-4.1: new full speed USB device using ohci_hcd and address 3
    input: HID 413c:8157 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.1/3-4.1:1.0/input/input19
    generic-usb 0003:413C:8157.0006: input,hidraw5: USB HID v1.11 Keyboard [HID 413c:8157] on usb-0000:00:04.0-4.1/input0
    usb 3-4.2: new full speed USB device using ohci_hcd and address 4
    input: HID 413c:8158 as /devices/pci0000:00/0000:00:04.0/usb3/3-4/3-4.2/3-4.2:1.0/input/input20
    generic-usb 0003:413C:8158.0007: input,hidraw6: USB HID v1.11 Mouse [HID 413c:8158] on usb-0000:00:04.0-4.2/input0
    Adding 6243324k swap on /dev/sda4. Priority:-1 extents:1 across:6243324k
    usb 3-4.3: new full speed USB device using ohci_hcd and address 5
    Bluetooth: Core ver 2.15
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: Generic Bluetooth USB driver ver 0.6
    usbcore: registered new interface driver btusb
    CE: hpet increased min_delta_ns to 11520 nsec
    CPUFREQ: Per core ondemand sysfs interface is deprecated - ignore_nice_load
    EXT4-fs (sda3): re-mounted. Opts: barrier=1,data=ordered,commit=360
    forcedeth 0000:00:0a.0: eth0: no link during initialization
    ohci_hcd 0000:00:06.0: PCI INT A disabled
    ohci_hcd 0000:00:06.0: PME# enabled
    ohci_hcd 0000:00:06.0: BAR 0: set to [mem 0xf0887000-0xf0887fff] (PCI address [0xf0887000-0xf0887fff])
    ohci_hcd 0000:00:06.0: restoring config space at offset 0xf (was 0x1030100, writing 0x1030105)
    ohci_hcd 0000:00:06.0: restoring config space at offset 0x1 (was 0xb00000, writing 0xb00003)
    ohci_hcd 0000:00:06.0: PME# disabled
    ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z00O] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:06.0: setting latency timer to 64
    NET: Registered protocol family 10
    ADDRCONF(NETDEV_UP): eth0: link is not ready
    ADDRCONF(NETDEV_UP): wlan0: link is not ready
    Bluetooth: L2CAP ver 2.15
    Bluetooth: L2CAP socket layer initialized
    Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    Bluetooth: SCO (Voice Link) ver 0.6
    Bluetooth: SCO socket layer initialized
    Bluetooth: RFCOMM TTY layer initialized
    Bluetooth: RFCOMM socket layer initialized
    Bluetooth: RFCOMM ver 1.11
    Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    i2c /dev entries driver
    wlan0: authenticate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: authenticated
    wlan0: associate with 1c:af:f7:89:a6:76 (try 1)
    wlan0: RX AssocResp from 1c:af:f7:89:a6:76 (capab=0xc31 status=0 aid=1)
    wlan0: associated
    ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    cfg80211: Calling CRDA for country: GB
    cfg80211: Regulatory domain changed to country: GB
    cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    Intel AES-NI instructions are not detected.
    padlock_aes: VIA PadLock not detected.
    wlan0: no IPv6 routers present
    EXT4-fs (sda3): re-mounted. Opts: commit=0
    warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: [email protected]
    ifconfig wlan0:
    wlan0 Link encap:Ethernet HWaddr 00:22:5F:62:3D:05
    inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0
    inet6 addr: fe80::222:5fff:fe62:3d05/64 Scope:Link
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:87499 errors:0 dropped:0 overruns:0 frame:0
    TX packets:137443 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:23679050 (22.5 Mb) TX bytes:160748042 (153.3 Mb)
    I wonder why this is happening
    Last edited by king.flasher.dave (2011-04-13 16:15:59)

  • Very slow performance jclient when running with remote server

    We have performance problems when running a JClient application, if the Application Server is on a different machine in the same 100mbit network. In our application we open 6 panels with about 15 TextFieldBindings each, on a tabbed pane. Each panel has it's own viewobject on the server. It takes the panel allmost two minutes to start up. Our own code seems to perform reasonable, but between the last line of code and the actual visibility of the panel there is a long period of low intensity network traffic between the client and the server machine, while both machines have low CPU usage. We tried setting the synchmode of the ApplicationModule to SYNC_LAZY and SYNC_IMMEDIATE, but this does not seem to make any difference.
    It seems as if the server starts throwing a lot of events after our code is executed, which are caught by the BC4J controlbinding listeners. The performance is a lot better if we have the server and the client on the same machine, and the database on a different one.
    This kind of performance is not acceptable for this application. Are we doing something that should not be done with BC4J, or are we missing something?

    We have performance problems when running a JClient application, if the Application Server is on a different machine in the same 100mbit network. In our application we open 6 panels with about 15 TextFieldBindings each, on a tabbed pane. Each panel has it's own viewobject on the server. It takes the panel allmost two minutes to start up. Our own code seems to perform reasonable, but between the last line of code and the actual visibility of the panel there is a long period of low intensity network traffic between the client and the server machine, while both machines have low CPU usage. We tried setting the synchmode of the ApplicationModule to SYNC_LAZY and SYNC_IMMEDIATE, but this does not seem to make any difference.
    It seems as if the server starts throwing a lot of events after our code is executed, which are caught by the BC4J controlbinding listeners. The performance is a lot better if we have the server and the client on the same machine, and the database on a different one.
    This kind of performance is not acceptable for this application. Are we doing something that should not be done with BC4J, or are we missing something? You must be hitting a performance issue regarding download of all property metadata for setting labels etc. on the UI (in case of remote-tier deployment).
    This issue has been resolved for our next release of JDeveloper. Basically a new api has been added that allows 3tier apps to "download" the set of "used" VO definitions, Attribute Definitions etc on the client, so that the UI comes up quick.
    Also a application/ui/binding load code-generation has been modified to allow for "lazy" loading of controls/lazy binding etc, quite like what's done in the JClient Control-bindings sample on otn.
    For 9.0.2, you may shorten the "load" time, by loading only the UI that's first displayed and pre-loading ViewObject definition. However it'll still be slower than what the above mentioned method would do in one roundtrip.

  • Slow network connection possibly causing a slave to crash.

    We are using Berkeley DB XML 2.4.16 (Patch level 1) in combination with Berkeley DB 4.7.25 (Patch level 3). These are Java processes.
    We have a 4 node replication group with a master and a slave in the US, a slave in the UK and a slave in HK. We are using the built in replication manager. The acknowledgement policy is set to none. The HK slave OS is Red Hat Enterprise Linux ES release 3 (Taroon Update 8).
    The slave in HK is on a fairly slow network connection to the master in the US.
    The amount of traffic generated by the master can become fairly busy at times and this seemingly causes the HK slave to become fairly unstable. It would routinely crash (SIGSEGV) with the following back trace caught with gdb and a debug build of Berkeley DB XML/Berkeley DB. The location of the crash is very consistent. The UK slave also suffers this problem, but to a lesser degree (I suspect the faster network link to the UK to be a factor here).
    #5 <signal handler called>
    #6 0xb74fb2f8 in intfree () from /lib/tls/libc.so.6
    #7 0xb74fa278 in free () from /lib/tls/libc.so.6
    #8 0x6b7eee53 in __os_free (env=0x0, ptr=0x6ba335c0) at ../os/os_alloc.c:405
    #9 0x6b751375 in message_loop (env=0x6ba1acc0) at ../repmgr/repmgr_msg.c:49
    #10 0x6b7512a4 in __repmgr_msg_thread (args=0x6ba1acc0) at ../repmgr/repmgr_msg.c:29
    #11 0xb75c9dd8 in start_thread () from /lib/tls/libpthread.so.0
    #12 0xb7565d1a in clone () from /lib/tls/libc.so.6
    We had been adjusting the rep_set_limit environment parameter to see if it would help. First to 5MB, then to 1MB with little or no improvement.
    In an attempt to gather more information I had activated verbose replication logging on the HK slave which has had the side effect of fixing the problem.
    Does this sound like something that could be addressed with the rep_set_request parameter?
    I am no master on tuning these replication settings so some guidance would be appreciated.
    Thanks,
    Neil

    OK,
    I was able to reproduce the crash once again with verbose replication logging at the master, I know the verbose logging at the slave would be better but as we discussed that in fact fixes the problem, probably due the additional logging is throttling the replication mechanics a little.
    Here is the back-trace…
    #5 <signal handler called>
    #6 0xb74fb2f8 in intfree () from /lib/tls/libc.so.6
    #7 0xb74fa278 in free () from /lib/tls/libc.so.6
    #8 0x6b7d3e53 in __os_free (env=0x0, ptr=0x6b9de2b0) at ../os/os_alloc.c:405
    #9 0x6b736375 in message_loop (env=0x6b941da0) at ../repmgr/repmgr_msg.c:49
    #10 0x6b7362a4 in __repmgr_msg_thread (args=0x6b941da0) at ../repmgr/repmgr_msg.c:29
    #11 0xb75c9dd8 in start_thread () from /lib/tls/libpthread.so.0
    #12 0xb7565d1a in clone () from /lib/tls/libc.so.6
    Here is control info…
    print msg->control
    $1 = {data = 0x6b9de2f0, size = 36, ulen = 0, dlen = 0, doff = 0, app_data = 0x0, flags = 0}
    x/36xb msg->control.data
    0x6b9de2f0: 0x00 0x00 0x00 0x05 0x00 0x00 0x00 0x0e
    0x6b9de2f8: 0x00 0x00 0x00 0xf6 0x00 0x37 0x1a 0xd7
    0x6b9de300: 0x00 0x00 0x00 0x0b 0x00 0x00 0x00 0x01
    0x6b9de308: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
    0x6b9de310: 0x00 0x00 0x00 0x64
    The HK site was a bit behind when I started the tests, I didn't have the slave instance up over the weekend, I don't now if this really effects the results as I believe the HK has a hard time keeping up when there is a large volume of replication traffic in the normal case, hence the resulting crash is the same…
    Before the crash, the slave was synchronizing with the master and it was sending out what I would guess normal "nobuf" messages. This is quickly followed by a large amount of "nobuf resend" messages. This continues for a bit intermixed with " MASTER: wrote only 53 bytes to site XXX.XX.XX.XX:58010" (The number of bytes are random). In the end it starts logging the following several times along with the "nobuf resend" messages..
    MASTER: msg to site XXX.XX.XX.XX:58010 to be queued
    MASTER: block msg thread, await queue space
    MASTER: will await drain
    MASTER: drain returned 0 (0,0)
    If you would like to take a look at the actual log, I will need a way to filter any sensitive information (which could prove to be difficult) or attempt to reproduce it with another pair rigged to be something generic and hope it exhibits the same behavior.

  • Slow network while running Archlinux

    Hi there,
    Recently (and, that's the weirdest part, recently only) the network have been really slow. From what I see when I'm running Windows, I assume I actually only get a fraction of the speed I should get when I'm running ArchLinux.
    For instance, when I'm alone at home, I have an acceptable connection with ArchLinux (though I still can't play online games : too much lag. I have to boot on Windows for that).
    And when some roommates are here, I have an utterly slow connection which makes it barely possible to load a page from ArchLinux's wiki (though I can do it with Windows with no problem, and can still play online games with a bit of lag).
    It's been lasting for the past three months, so I'm pretty sure it's no coincidence : there's something wrong.
    I've been reading some pieces of the wiki and tried to find what's wrong with my configuration. I did find that the hostname from the rc.conf and hosts files were different, but changing that didn't solve the network problem.
    Here is my configuration :
    /etc/rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK=""
    TIMEZONE="Europe/Madrid"
    KEYMAP="es"
    CONSOLEFONT="iso01-12x22"
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=()
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="localhost"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock @syslog-ng dbus !network networkmanager dhcpd ifplugd netfs @crond @sshd)
    /etc/resolv.conf
    # Generated by NetworkManager
    nameserver 62.42.230.24
    nameserver 62.42.63.52
    /etc/hosts
    # /etc/hosts: static lookup table for host names
    #<ip-address> <hostname.domain.org> <hostname>
    127.0.0.1 localhost.localdomain localhost
    ::1 localhost.localdomain localhost
    # End of file
    I tried commenting either of the DNS servers, without any changes.
    I also tried with two different network daemons, NetworkManager and Wicd.
    Is there something wrong with my configuration ? Is there something I can do to find out where does this problem may come from ?

    Re-read this section on rc.conf and also cross-refer with the various items such as netcfg, as well as taking note of the single network approach and what you should do in #2 re: network daemon vs. your config with networkmanager:
    https://wiki.archlinux.org/index.php/Rc.conf#Networking
    Take a look at pdnsd as an alternative way to configure DNS lookups, also check out OpenDNS and Google's DNS as potential alternative nameservers so that you don't rely on your ISP's services.
    https://wiki.archlinux.org/index.php/Pdnsd
    http://www.opendns.com/
    http://code.google.com/speed/public-dns/
    Let us know if that makes it better.
    NB: The DNS bit is an alternative approach that does not necessarily solve your issues though might be a desirable configuration.

Maybe you are looking for

  • Help, iPhone 3GS stuck in recovery

    Whenever I connect to iTunes I get the recovery mode message, so am having to restore the phone. After 10 minutes or so of restoring, I get a message saying "The iPhone cannot be restored, an unknown error occured(1603 or 1604). One thing that occure

  • Trex install on content server

    is it possible to search with trex in sap content server? At the moment content server and trex are installed on the same server. R/3 is using the content server. And i successfull made an rfc connection to trex. What are the next steps for trex to s

  • Synching new Ipod to existing library

    Sorry if this is really basic.... I have a new Ipod classic (used to have a mini) and I want to start using it and synch it to my existing library. I have no idea where to start. I have got the most up to dtae version of itunes, but the synch option

  • Error at UserStorage.retrieveUserDatabaseProfileData()

    Hi, I have a bunch of users setup as alias, and the xOwner field in the Docmeta table is being set with these userid's. But for 3 users in the list, I get the following error in the log file. Unable to retrieve user information to perform workflow ac

  • How to read out message cycle time from Vector CANdb file?

    Hello LabVIEW friends, I tried to open a Vector CAN Database (*.dbc) using the NI-CAN 2.3.2 Channel API and read out the cycle time of a message. The CAN get property.vi should provide the sample rate which is described as followed: Input parameter o