Slow NWDS Startup for 7.0.9
Hi
I just installed NWD Studio 7.0.9 and it takes about 5 minutes or more to come up compared to 2.0.18 which was almost instantly
Anybody have any idea what the reasoning is for that. Also there is a new option called NWDS Console. I'm looking for documentation what that is for.
Thanks for the help
Tim
Hi Tim,
See this thread same problem but solved
/thread/121900 [original link is broken]
Regards, Suresh KB
Similar Messages
-
I have a very slow startup for a macbook pro after installing Maverick
I have a very slow startup for a macbook pro after installing Maverick
Try SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
Then try a safe boot again:
http://support.apple.com/en-us/HT201262
Ciao. -
Slow Shutdown & Startup on MacBookPro OS ML 10.8.2
I have faced slow shutdown & startup on my MacBook Pro Late 2011 , OS X Mountain Lion 10.8.2 for a while.
I have done searching for solution and had tried some but no luck.
Could someone please help.
Thanks!
Below are the message from console
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 com.apple.launchd[1] (com.apple.ShareKitHelper[258]): Exited: Killed: 9
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] (com.apple.PackageKit.InstallStatus[394]): Exited: Terminated: 15
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] (com.apple.PackageKit.InstallStatus): Throttling respawn: Will start in 10 seconds
Dec 24 23:07:28 com.apple.launchd.peruser.501[146] ([0x0-0x11011].com.apple.inputmethod.ironwood[203]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=143
Dec 24 23:07:28 --- last message repeated 1 time ---
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.talagent[159]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=243
Dec 24 23:07:28 MacBook-Pro.local UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=41995 Died
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=159
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=100
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] ([0x0-0x1a01a].com.apple.AppleSpell[235]): Exited: Terminated: 15
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.UserEventAgent-Aqua[149]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.storeagent[255]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[239]): Exited: Killed: 9
Dec 24 23:07:28 MacBook-Pro com.apple.launchd.peruser.501[146] ([0x0-0xc00c].com.apple.iTunesHelper[185]): Exited with code: 1
Dec 24 23:07:28 MacBook-Pro.local WindowServer[101]: CGXGetConnectionProperty: Invalid connection 38659
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 MacBook-Pro.local loginwindow[48]: DEAD_PROCESS: 48 console
Dec 24 23:07:28 MacBook-Pro.local airportd[395]: _doAutoJoin: Already associated to “Internet_Mobility”. Bailing on auto-join.
Dec 24 23:07:28 MacBook-Pro.local coreservicesd[26]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=131
Dec 24 23:07:28 MacBook-Pro.local WindowServer[101]: CGXGetConnectionProperty: Invalid connection 38659
Dec 24 23:07:28 --- last message repeated 4 times ---
Dec 24 23:07:28 MacBook-Pro.local shutdown[396]: halt by Keant:
Dec 24 23:07:28 MacBook-Pro.local shutdown[396]: SHUTDOWN_TIME: 1356361648 592277This fixed mine
> sys pref
>network
>Advanced
> DNS
check DNS numbers are correct, mine was showing the router and greyed out so I added my IP specific numbers
>Restart (not sure if you need this step but I did it)
Page loading improved significantly from very slow to acceptable on some to blistering fast in others
AND emails just flew out really quickly
Also make sure you have the right ports for your IP because I had been given an alternate one to try and that upset the incoming messages
>Mail
>preferences
> advanced
> port (you can find this by searching your the help section of your IP) -
IMac slow on startup after installing Mavericks
Hi,
Like others I have been experiencing my mid 2011 iMac being slow on startup (and a little slow after that). I've read a lot of threads about this and was wondering how to approach it.
I was already thinking of buying more RAM ( I currently have 4GB) and updrading to Yosemite, does anyone think this may help rather than going through many diagnostic steps with Mavericks?
..... or am I likely to find myself back in the same position!
Jon
P.S. i know the Apple site says no RAM is available for this model, but one of the more experienced posters supplied a link to a site which implies that there is.Hi there,
Here's the report.
By the way, with just Firefox and Aperture open, here is a copy of my Activity Monitor:
The swap used seems to be a very recent thing, until a few days ago it read 0.
The slowness is after startup - things bounce in the dock and safari takes nearly 10 secs to open, but if the Mac has been on a little while, or if it's been on sleep, then things run ok. There are other things I have noticed like some of the Aperture functions being slower and a bit clunky - this seems to have a been a constant feature since I upgraded to Mavericks and upgraded Aperture to go with it.
Any help you can give is appreciated.
Jon
EtreCheck version: 2.0.11 (98)
Report generated 20 November 2014 21:15:28 GMT
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.5 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6750M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.9.5 (13F34) - Uptime: one day 8:33:41
Disk Information: ℹ️
ST3500418AS disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (354.24 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Apple Optical USB Mouse
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Logitech USB Receiver
TOSHIBA TransMemory 15.52 GB
S.M.A.R.T. Status: Verified
TOSHIBA (disk1s1) /Volumes/TOSHIBA : 15.52 GB (15.27 GB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.freecom.driver.BoulderScsi (1.0.0d1) Support
Problem System Launch Daemons: ℹ️
[failed] com.apple.security.syspolicy.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[invalid?] com.torch.update.agent.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
Auto Mute UNKNOWN (missing value)
FastTasks 2 Application (/Applications/FastTasks 2.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Destinations:
VERBATIM HD [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 0 B > (Disk size 0 B X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% mds_stores
0% mds
0% AppleSpell
Top Processes by Memory: ℹ️
975 MB Aperture
369 MB firefox
129 MB softwareupdated
69 MB WindowServer
52 MB mds_stores
Virtual Memory Information: ℹ️
227 MB Free RAM
1.31 GB Active RAM
1.53 GB Inactive RAM
966 MB Wired RAM
1.82 GB Page-ins
91 MB Page-outs -
Hi,
I am a new administrator and am facing an issue with my Oracle 8.1.6 database.I have encountered a problem where somedays my Oracle becomes extemely slow after startup.Almost it goes into a hung kind of state wheneever any reports etc are accessed from the application.After waiting for abt half an hour or so everything goes back to normal.
Has anyone faced a similar kind of problem .Has it got something to do with the recovery process taking place during startup.Can you please help me find a solution to this.
Regards,
Dineshin order to be sure you may watch the operating system cpu, disk, memory and network load and catch the top consuming proceses - you can use sar iostat vmstat and netstat for unix -
After match them from v$ views to find out the sql query, what they are waiting etc. - you can use this query to identify what is going on behind -
-- who is doing what
SELECT sq.sql_text,
se.status,
se.username,
se.osuser,
se.terminal,
se.machine,
'ALTER SYSTEM KILL SESSION ''' || se.sid || ', ' || se.serial# ||
''' IMMEDIATE ;',
se.sid,
se.serial#,
pr.spid,
se.saddr,
se.schemaname,
se.program,
se.logon_time,
sq.hash_value,
sq.address,
sq.buffer_gets,
sq.disk_reads,
sq.executions,
sq.fetches,
sq.rows_processed,
io.block_gets,
io.consistent_gets,
io.physical_reads,
io.block_changes,
io.consistent_changes,
se.module,
se.action,
se.client_info,
sw.event,
sw.p1text,
sw.p1,
sw.p2text,
sw.p2,
pr.pga_used_mem,
pr.pga_alloc_mem,
pr.pga_freeable_mem,
pr.pga_max_mem,
'exec dbms_support.start_trace_in_session(' || se.sid || ', ' || se.serial# || ', ' ||
'waits => TRUE' || ', ' || 'binds => TRUE);',
'exec dbms_support.stop_trace_in_session(' || se.sid || ', ' || se.serial# || ');'
FROM v$session se, v$sqlarea sq, v$process pr, v$session_wait sw, v$sess_io io
WHERE status IN ('ACTIVE', 'KILLED', ' INACTIVE', ' CACHED', ' SNIPED')
AND se.sql_hash_value = sq.hash_value(+)
AND se.sql_address = sq.address(+)
AND se.paddr = pr.addr
AND se.sid = sw.sid
AND se.sid = io.sid
ORDER BY sq.sql_text, se.username, se.schemaname, se.osuser, se.program, se.sid
You need to match the top consumer os processes' id with the "pr.spid" column, then you might look at the other columns of that row for details.
Also the database runs a number of jobs - backups, etc. these may be the problems. -
MacBook Pro Very Slow at startup
For the last couple months, my MacBook Pro (running Mac OS X 10.6.5) has been incredibly slow at startup. It used to take seconds to go from shutdown to ready for use. Now it takes a few minutes. The computer also freezes up twice (with the spinning "rainbow" wheel icon) for anywhere from 30 seconds to a couple minutes the first time I open any program after startup.
The computer generally works normally after that. It wakes up from "sleep" quickly and doesn't have any hangups. It just seems to be messed up when starting up after a shutdown.
I'm fairly new to Macs and can't seem to find any kind of system diagnostic or hard drive scan utility on my system to run to check my system, which would be the first things I'd have done with a similar issue with a PC.
Any help or suggestions would be greatly appreciated.That indicates the HD is failing. Backup immediately while it's still working and take it in for repair. It's in your best interest to make an appointment at the Genius Bar, if you have never done this the link is noted below will get you started. Make sure you let them know what you have done and what error messages you have received.
http://www.apple.com/buy/locator/service/ -
FCE Slow, sluggish startup and freezes up?
We've been having some problems with Final Cut Express, it is very slow to startup(sometimes 15 minutes), and after it starts it sometimes locks up with the spinning rainbow wheel. We are running this basically on 12 machines and over half are having similar problems. We are running this on 2 year old G5 iMacs, running OSX 10.4.8 and Quicktime 7.1.5. I've reset the PRAM, and did an open firmeware reset and reinstalled the application, but it is still acting this way. Any idea's?
"it just seems to have problems when the Broadcast
class logs into that profile to use FCE that it is
real slow and we have problems."
Are these admin users? Are there restrictions on the
user? What are the restrictions? How much RAM is on
the machines?
These are not admin users, but the profile I used that worked fast was an admin user. These users can't use most of the System Prefs, but have access to all of the space to save for the most part. The machines have 1gb of memory. -
We are using Windows 7 Enterprise SP1 64 bit in our environment with IE8. Homepage is set to our internal Sharepoint site. Alternate browser is Firefox and Proxy is used. Problem is that Startup Time of IE8 varies alot. When I launch IE8 following happens.
Connecting
Website Found. Waiting for reply
HomePage Intranet URL
Opened Six Times, Load Times are mentioned in Seconds below
Time 29:30, 8:31, 30:64, 42:83, 6:77, 28:07
Changed the Homepage to Google
HomePage https://www.google.co.uk/?gfe_rd=ctrl&ei=CHcoU8zoL-LR8geSsYGQDg&gws_rd=cr
Opened Six Times, Load Times are mentioned in Seconds below
Time 1:85, 1:65, 23:11, 23:13, 23:13, 1:70
Please help how can I reduce the Time and make it consistent.Hi,
Have you tried disabling proxy to check the result?
3rd add-on can also cause slow IE8 startup. Please try running IE in no add-on mode.
Is Internet Explorer slow? 5 things to tryhttp://windows.microsoft.com/en-us/windows/help/internet-explorer/slow-five-tips-to-boost-performance
Fix Internet Explorer issues to make IE fast, safe and stable http://support.microsoft.com/mats/ie_performance_and_safety
Andy Altmann
TechNet Community Support -
Firefox works very slow on startup and going to webpages. Why?
When I had firefox before it worked very fast. It was great. Since I installed Windows 7 it has started working very slow on startup and when going to webpages. In fact I always have to wait for it to move. Very poor results. What is the problem?
Also, don't ask me about Firefox 4; this is a real piece of crap. I tried it and deleted it. I am back to using 3.When I had firefox before it worked very fast. It was great. Since I installed Windows 7 it has started working very slow on startup and when going to webpages. In fact I always have to wait for it to move. Very poor results. What is the problem?
Also, don't ask me about Firefox 4; this is a real piece of crap. I tried it and deleted it. I am back to using 3. -
My unibody macbook pro is slow at startup
My late 2008 umbp has become kind of slow at startup. Sometimes all I get is a dark screen, then the gray screen, then a minute later to show the apple icon, etc. Sometimes, the desktop interface takes kind of long to load up as well. Is there a way to make my mac start up faster? the default way?
The last thing I did before the startup slowness was I deleted xp through bootcamp, installed vista, and then removed it as well.
Could that have been the cause?Nevermind. I finally resolved the problem. What I did was reset the pram and now it boots up way faster. Just for curiosity, what does the pram reset does to the umbp?
-
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
-
my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5
What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't. -
Very Slow preview rendering for lightroom 5 on import
I am seeing very very slow rendering of preview images only when using the import function in lightroom 5. By slow, I mean for a shoot of 60 shots in raw, it could take 30 minutes before I can preview them all in the pane to see which ones I want to actually import. This was not an issue with lightroom 4. It is not an issue when using lightroom. Previews are fast there, even for images I've never pulled up before.
My hardware is a PC, with an intell i7 chip, and 16 gig of memory. My nvidia graphics card has the latest drivers.
I've seen a few others reporting this issue, so I'm trying to log it as a bug. Even though the dial up support text on the adobe lightroom says available 24/7, it now plays a voice recording that says only available m-f.
BradI'm having the same problem using Windows 7 (64b). I just took a shoot over the weekend for a significant birthday event. Now I can't load the photos. The work-around doesn't work as the program freezes before I get the chance to select the camera under "files".
I recently upgraded from 3.6 to 5 as I was also noticing a slowdown in the import function. That turned out to be a bad move I think. I also deliberately cleaned up the CF card and removed all my video recordings, as this seems to be reported as part of the problem, but to no avail.
This seems to be a pretty major bug to have in a major release that's been around for a while now, that I'm expected to pay for, and no sign of a resolution to date!
Cam. -
Firefox 21 is really slow on startup, I have disabled all addons, checked memory, optimized win 7, ran system mechanic but it is still slow, changed home page . IE 8.9.10 is lightning fast on startup.
A tad faster but still slow compared to IE 8,9,10 where it starts instantly.
-
I need to update to the latest version of Snow Leapord-currently running v10.6. Because of where we live the slow download speed for such a large file has kept me from downloading the update. What can I do short of hooking up computer elsewhere?
Do you ever visit a friend or realtive with a Mac who has faster internet? Maybe the local library has Macs on a fast line. If so, get a USB thumb drive and put this link on it from your computer:
http://support.apple.com/kb/DL1399
Then put this link on the drive:
http://support.apple.com/kb/DL1429
When you are at some place that has a Mac with a decent download speed. insert the thumb drive in that Mac and click on the first link ("DL1399") and direct the download to your thumb drive. Now do the same this with the second link.
The installer files will now be on the thumb drive and, when you get home, drag them from the thumb drive to your desktop. Install the Combo update first.
Maybe you are looking for
-
I installed an application called "You SendIt" because some audio files were sent to me and I had to access them through it. My Mac is running Windows and OS-X. I bought an version of Office 2008 separately. I tried to uninstall it, to get rid of all
-
Inability to install SCXI 1200 in Windows XP
I am trying to use some older NI hardware (SCXI 1000 chassis with SCXI 1200 connected to a parrallel port), and windows XP is unable to detect the hardware. I tried following the SCXI 1200 support pages, but when I enter the add new hardware wizard t
-
Is there a way to schedue scripts in Business Catalyst
Hi, My intentions are to create few recurring jobs that whould interact with the BC Apis (from within the BC website) . I have a requirement to run few of them on weekly basis and few on monthly basis as well. Is there a way in which BC would allow m
-
Unable to pass parameters in Report Bulder due to single quotes
Hello, I have a problem with parameters in Report Bulder. This is the query: where task.closed_at between (@Per) Then I need have to pass following value to @Per : DATEADD(month, -5, getdate()) and getdate() to get following: where task.closed_at bet
-
Imac 3.2GH core i3 and printing
Hi, I have a new iMac and I am having trouble printing. I have been on the Apple support but they are unable to help either. The trouble I have is printing photos. I have tried two different printers HP Photosmart all-in-one with a resolution of 4800