Slow OOBE on windows 8.1 deployment

Hi,
Our new windows 8.1 update 1 deployment takes over 8-9 minutes for proccessing the OOBE and user first boot/login.
It's a mui deployment with 33 languages . 
I've checked the setupact.log and found these 2 "lags" :
Location :  C:\Windows\Panther\UnattendGC (OOBE)
2014-08-13 08:22:10, Info                         [msoobe.exe] Calculated OOBE STARTUP
FLAGS: [0x00000000]
2014-08-13 08:22:14, Info                         [msoobe.exe] Processing
cache change notification for setting PRODUCTKEYSTATUS.
2014-08-13 08:37:56, Info                         [msoobe.exe] Successfully
notified UI language change
2014-08-13 08:37:56, Info                         [msoobe.exe] Processing cache change
notification for setting NOTIFYLANGUAGEDONE.
2014-08-13 08:37:56, Info                         [msoobe.exe] Posted cache change notification
for setting NOTIFYLANGUAGEDONE.
2014-08-13 08:37:56, Info                         [msoobe.exe] TASK:
End successfully running task NotifyUILanguageChange
2014-08-13 08:43:26, Info                         [msoobe.exe] Posted
cache change notification for setting AUDITMODE.
Also when I do the OOBE step without internet connection it only takes 5 minutes...

Hi,
In my opinion, the difference between internet connection yes or not is that domain policy push or not. The lag time should be used to push policy.
To identify my suppose, you can check the client policy status if there is any different between internet connection yes and not.
Roger Lu
TechNet Community Support

Similar Messages

  • Boot message: problem with hard drive detected. Slow loading of windows 7

    Good Day
    I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
    the messsage says hard drive failure imminent you should back up you data etc.
    My specs are:
    Intel core 2 duo e8400 3.0 ghz
    4 gig ddr3 transcend
    1 tb seagate 7200.12
    giga byte nvidia 9800 gt 1 gig ddr3
    Please help lots of data.

    Another option:
    Take your hard drive out and slave it into another KNOWN WORKING PC.
    Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
    Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
    MCSE: 6771498

  • IMac & Macbook running slower than a Windows computer

    Hello all, I need some help with my apple products.  I spend half my day messing with the internet to try and get it going instead of sitting there with a blank look on its face.  They freeze up to an extent.  I generally can always close out Safari, shut off the wifi, then turn wifi on and safari will work somewhat better sometimes.  Here is the Etre report for both the iMac and MacBook.  Also on the MacBook report, I was digging around in my system report and found something that made me think it might be bad so i have included it as well.  Please help me and keep me from wasting half my day every day.  Thanks.  There is several extra lines after the Macbook report that came from my system report.  I don't know if it is pertinent or not but I feel like it is.  I wasn't sure what to leave out so I just put it all in, sorry for the long post.
    Note----- I took out the logs that were from the previous address I lived at.  Just included from when I moved into new house.
    THIS IS FOR THE iMac
    Problem description:
    Ever since I moved into this new house my apple computers have slowed down to granny speed and sometimes they just sit there and stare at you.  I have an iMac from 2011, a mac book pro 2014, iPhone 6, iPhone 4s, and to top it off a windows computer that is used for graphic software.  I have 2 TV’s that we use as well.  My internet and cable are provided by ATT and at my old house it worked great, no problems.  I have had ATT out twice since install in January.  They have given me a new modem, and a booster to help increase the reach of the wireless internet.  My internet is supposed to be 18mbs download and for the life of me can’t think of the upload speed.  When testing I usually have a 10 to 11 download and a 1.80 upload speed.  I have ran verify disk, fix permissions so many times and that it is ridiculous.  My iMac is used in the back room which is about 30 feet from modem, that is why they gave me the booster the 2nd time out.  The macbook is used just whereever.  The speed of the Mac’s is slower then the Windows computer.  That ain’t right.  I don’t download anything, I don’t go to crazy suspect sites.  I have taken the iMac to apple store and they tested it and said it was fine.  I have re-installed the O.S. (Yosimiteme 10.10.3).  I just want my apples to work properly again.
    EtreCheck version: 2.2 (132)
    Report generated 5/3/15, 8:22 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,2
        1 3.06 GHz Intel Core i3 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                Empty 
            BANK 1/DIMM0
                Empty 
            BANK 0/DIMM1
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 4670 - VRAM: 256 MB
            iMac 1920 x 1080
            G206HQL  1600 x 900 @ 60 Hz
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 0:25:17
    Disk Information: ℹ️
        WDC WD5000AAKS-40V6A0 disk0 : (500.11 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 499.25 GB (392.09 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5680H
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.Belcarra.iokit.USBLAN_netpart (2.0.2) [Click for support]
        [not loaded]    com.Belcarra.iokit.USBLAN_usbpart (2.0.2) [Click for support]
        [not loaded]    com.RemoteControl.USBLAN.usbpart (2.0.6) [Click for support]
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) [Click for support]
            /System/Library/Extensions/Belcarra.USBLAN_netpart.kext/Contents/PlugIns
        [not loaded]    com.belcarra.iokit.netpart.panther (1.6.1) [Click for support]
            /System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/Contents/PlugIns
        [not loaded]    com.belcarra.iokit.usbpart.panther (1.6.1) [Click for support]
            /System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext/Contents/PlugIns
        [not loaded]    com.RemoteControl.USBLAN.panther (1.6.1) [Click for support]
    Startup Items: ℹ️
        HP IO: Path: /Library/StartupItems/HP IO
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [running]    com.flipvideo.FlipShare.AutoRun.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.hp.help.tocgenerator.plist [Click for support]
        [failed]    com.motive.alertDetectorHost.plist [Click for support] [Click for details]
        [failed]    com.motive.userAgent.plist [Click for support] [Click for details]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [running]    com.flipvideo.FlipShareServer.launchd.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.leapfrog.connect.shell.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [failed]    com.motive.systemDaemon.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        AdobeResourceSynchronizer    Application  (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        HP Scheduler    Application  (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        npMotive: Version: 1.0.0 - SDK 10.7 [Click for support]
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        CouponPrinter-FireFox_v2: Version: Version 1.1.6
        JavaAppletPlugin: Version: Java 7 Update 45 Check version
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
        WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
        Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Safari Extensions: ℹ️
        jbsearch
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        GamePadCompanionPrefPanel  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 499.25 GB Disk used: 107.15 GB
        Destinations:
            Seagate Backup Plus Drive [Local]
            Total size: 999.86 GB
            Total number of backups: 39
            Oldest backup: 2015-03-03 23:58:26 +0000
            Last backup: 2015-04-22 19:27:08 +0000
            Size of backup disk: Adequate
                Backup size 999.86 GB > (Disk used 107.15 GB X 3)
    Top Processes by CPU: ℹ️
             3%    WindowServer
             2%    com.hp.devicemonitor
             1%    syncdefaultsd
             1%    fontd
             0%    Creative Cloud
    Top Processes by Memory: ℹ️
        420 MB    kernel_task
        336 MB    mdworker(11)
        266 MB    com.apple.WebKit.WebContent(2)
        66 MB    Safari
        66 MB    Finder
    Virtual Memory Information: ℹ️
        974 MB    Free RAM
        3.05 GB    Used RAM
        0 B    Swap Used
    Diagnostics Information: ℹ️
        May 3, 2015, 07:55:19 PM    Self test - passed
    This is for the MacBook
    EtreCheck version: 2.2 (132)
    Report generated 5/3/15, 8:23 PM
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
        MacBook Pro - model: MacBookPro11,1
        1 2.4 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Not upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en0: 802.11 a/b/g/n/ac
        Battery: Health = Normal - Cycle count = 290 - SN = D863505T5JWFT5Y1L
    Video Information: ℹ️
        Intel Iris
            Color LCD 2560 x 1600
    System Software: ℹ️
        OS X 10.10.3 (14D136) - Time since boot: 20:35:40
    Disk Information: ℹ️
        APPLE SSD SD0128F disk0 : (121.33 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 120.14 GB (52.28 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 120.47 GB Online
    USB Information: ℹ️
        Apple Internal Memory Card Reader
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Library/Application Support/VirtualBox
        [not loaded]    org.virtualbox.kext.VBoxDrv (4.3.14) [Click for support]
        [not loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.14) [Click for support]
        [not loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.14) [Click for support]
        [not loaded]    org.virtualbox.kext.VBoxUSB (4.3.14) [Click for support]
            /System/Library/Extensions
        [loaded]    com.screenrecycler.driver.ScreenRecyclerDriver (1.4.13 - SDK 10.4) [Click for support]
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.AdobeCreativeCloud.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
        [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.google.keystone.daemon.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
        [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
        [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
        [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
        Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
        SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 31 Check version
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
        WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        Buffer
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 120.14 GB Disk used: 67.85 GB
        Destinations:
            Seagate Backup Plus Drive [Local]
            Total size: 999.86 GB
            Total number of backups: 32
            Oldest backup: 2014-09-03 02:53:05 +0000
            Last backup: 2015-04-01 02:18:11 +0000
            Size of backup disk: Excellent
                Backup size 999.86 GB > (Disk size 120.14 GB X 3)
    Top Processes by CPU: ℹ️
             5%    WindowServer
             2%    tccd(2)
             2%    fontd
             1%    cloudd
             0%    taskgated
    Top Processes by Memory: ℹ️
        546 MB    kernel_task
        135 MB    Safari
        78 MB    mdworker(5)
        70 MB    WindowServer
        61 MB    TextEdit
    Virtual Memory Information: ℹ️
        372 MB    Free RAM
        3.63 GB    Used RAM
        90 MB    Swap Used
    Diagnostics Information: ℹ️
        May 2, 2015, 11:47:44 PM    Self test - passed
        May 2, 2015, 11:42:44 PM    /Library/Logs/DiagnosticReports/Safari_2015-05-02-234244_[redacted].hang
    Logs:
    syncservices.log:
      Description: SyncServices Log
      Date Modified: 05Apr15, 01:14
      Size: 229 KB
      Contents: ...
    2015-01-08 01:14:34:505|SyncServer|5861|0x7fa649d11b80|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-08 01:16:34:956|SyncServer|5861|0x7fa649d11b80|Server|Info| Cancelling all sync plans.
    2015-01-08 01:16:34:970|SyncServer|5861|0x7fa649d11b80|Server|Info| Goodnight, Gracie.
    2015-01-09 23:24:28:259|SyncServer|757|0x7fa891603f40|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-09 23:28:34:911|SyncServer|757|0x7fa891603f40|Server|Info| Cancelling all sync plans.
    2015-01-09 23:28:34:919|SyncServer|757|0x7fa891603f40|Server|Info| Goodnight, Gracie.
    2015-01-10 15:42:25:744|SyncServer|1157|0x7f80a0e07490|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-10 15:44:26:194|SyncServer|1157|0x7f80a0e07490|Server|Info| Cancelling all sync plans.
    2015-01-10 15:44:26:209|SyncServer|1157|0x7f80a0e07490|Server|Info| Goodnight, Gracie.
    2015-01-15 23:03:10:076|SyncServer|2015|0x7f948b507600|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-15 23:05:10:406|SyncServer|2015|0x7f948b507600|Server|Info| Cancelling all sync plans.
    2015-01-15 23:05:10:419|SyncServer|2015|0x7f948b507600|Server|Info| Goodnight, Gracie.
    2015-01-18 09:38:30:633|SyncServer|8347|0x7ff9d2c0e650|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-18 09:42:26:784|SyncServer|8347|0x7ff9d2c0e650|Server|Info| Cancelling all sync plans.
    2015-01-18 09:42:26:795|SyncServer|8347|0x7ff9d2c0e650|Server|Info| Goodnight, Gracie.
    2015-01-21 01:43:30:322|SyncServer|3621|0x7faa7a507c30|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-21 01:46:11:127|SyncServer|3621|0x7faa7a507c30|Server|Info| Cancelling all sync plans.
    2015-01-21 01:46:11:140|SyncServer|3621|0x7faa7a507c30|Server|Info| Goodnight, Gracie.
    2015-01-28 22:53:33:756|SyncServer|18688|0x7f9270506d90|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-28 22:55:34:304|SyncServer|18688|0x7f9270506d90|Server|Info| Cancelling all sync plans.
    2015-01-28 22:55:34:318|SyncServer|18688|0x7f9270506d90|Server|Info| Goodnight, Gracie.
    2015-01-29 00:29:33:265|SyncServer|18828|0x7fefaa411b60|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-01-29 00:50:28:003|SyncServer|18828|0x7fefaa411b60|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
    2015-01-29 00:52:28:018|SyncServer|18828|0x7fefaa411b60|Server|Info| Cancelling all sync plans.
    2015-01-29 00:52:28:054|SyncServer|18828|0x7fefaa411b60|Server|Info| Goodnight, Gracie.
    2015-02-01 00:47:00:095|SyncServer|7426|0x7ff4bae07710|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-02-01 00:49:00:646|SyncServer|7426|0x7ff4bae07710|Server|Info| Cancelling all sync plans.
    2015-02-01 00:49:00:659|SyncServer|7426|0x7ff4bae07710|Server|Info| Goodnight, Gracie.
    2015-02-09 09:31:46:171|SyncServer|17932|0x7fb18860f330|Logging|Info| Logging initialized, engine version 722 : log level 3
    2015-02-09 09:36:04:226|SyncServer|17932|0x7fb18860f330|Server|Info| Cancelling all sync plans.
    2015-02-09 09:36:04:240|SyncServer|17932|0x7fb18860f330|Server|Info| Goodnight, Gracie.
    2015-02-09 09:44:06:816|SyncServer|17954|0x7fc92160f

    Ok, I don't know what those drivers are for??????  I don't have a clue   Here is what it looks like when I do the option thing.  Hopefully its ok to post that.  I went into system preference and went to network and DNS server as a ip number and search domains as attlocal.net not sure thats correct, but that is what my phone had.  Anyway it started working good for a while now it is just going slow again.  I don't have anything set up for the tab 802.1X and my proxies is blank in the protocol to configure (nothing checked( and I a have this *.local, 169.254/16 in the bypass proxy setting plus the use passive FTP box is checked. Maybe that will help some.  I will look at the extensions and get rid of them, I thought I had already done that though.  Ok, thanks for the input let me know if any of this helps or what I should do.  Thanks again.

  • Windows Deployment Services - Windows 8.1 Deployment Failure (Required Driver could not be Installed)

    Hello everyone,
    Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
    WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
    ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
    it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
    We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
    Another forum has this issue:  http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstall

    Hi,
    Please first check the solution here:
    Error: Windows installation cannot continue because a required driver could not be installed
    http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
    Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
    If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
    X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
    If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
    $Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
    C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
    Kate Li
    TechNet Community Support

  • Windows 8.1 deployment and the store

    Hi all.
    I'm in the process of creating a Windows 8.1 image and I'm trying to understand how the Windows store works within the enterprise, does anyone know how the process should work in terms of...
    Can a domain joined Windows 8.1 device open the Windows store and download apps with the domain users logon account? this is without forcing the user to go through the process of turning that account into a live account (which we need to avoid)
    Can we download some 'free' applications from the Windows store (for example Lync) add this to our image and deploy for all users? we would need to be able to fully automate the process as our GOLD image and desktop deployment process are both unattended
    using MDT.
    Can we update applications during the Windows 8.1 deployment process without any user interaction?
    Hope someone has some answers as I've struggled to find the answers on Bing (...or any other well known search engines!)

    Hi,
    To access the store a Microsoft Account is requiered. This means that any AD user who wants to access the store will have to link his AD account to a Microsoft Account which is a manual end-user operation.
    To add modern ui apps to your reference image you would need the original appx file to use the "AppxPackage" command from DISM. Unfortunately only the app's developper could give you that file and I'm not sure they'd be likely to do so.
    In my opinion, unless you have developper that creates your own modern ui apps forget about managing that kind of app in your reference image, the best you can do is to remove some of the default apps with Remove-AppxProvisionedPackage
    Mickael,
    My technet galleries contributions :
    ConfigMgr driver injector
    SCCM Collection splitter
    ConfigMgr TS Tools
    Customize WinPE images with powershell

  • Task Sequence (LiteTouch.wsf) does not restart after first logon on Windows 8.1 deployment

    Hi guys!
    I can't figure out what cause the issue.
    First, this is my setup :
    ADK installed
    MDT 2012 (upgraded from 2010 update 1)
    Boot wim regenerated from scratch
    LTIApply.wsf edited http://support.microsoft.com/kb/2797676/en-us
    Windows 8.1 configured and captured (my first Win 8/8.1 deployment)
    New task sequence for that wim.
    My issue is :
    The task sequence windows won't show up only with windows 8.1 deployment after the first logon. (I tried with a Windows 7 with the same setup, works flawlessly)
    I can see the desktop, but nothing show up. I have all the folders and files on the c: (MININT, _SMSTaskSequence LTIBootstrap). I clicked twice on LTIBootstrap, did nothing. I did an LiteTouch.wsf /start, nothing.
    I recaptured my Windows 8.1 (it was on a virtual machine) and I did a new TS. The issue still there.
    All the SMSOSD logs files are on http://sdrv.ms/18VPSKy
    Someone can help me on this? I'll be very happy!
    thanks!

    Was this ever resolved or does anyone have an idea how to fix it?
    I am having a similar issue. I deploy a custom Windows 8.1 image to a system and I get through the OS install, but I end up at the user login screen without the task sequence resuming (thus not running any windows update, doesn't join domain, or any post-install
    tasks). The built in administrator account also shows up as disabled.
    The only changes I have made to the unattend.xml for that image are *maybe* to fix the IE 10/11 error that crashes the deployment by deleting the IE welcome tag, and I have no choice but to make that change when it happens.

  • IWeb 08 - my site works on my laptop, but is MEGA slow on a Windows machine

    My iWeb constructed site - published to a folder, then uploaded to my domain using Transmit (which is fully functional!) works on my laptop(s) but is MEGA slow on a Windows machine....and considering there's a lot of 'sheep' using Windows out there...AND the website involved is a business (a shop) www.ukdk.dk then I'm losing some business.
    What could be the problem?
    It works on BOTH my 2 Mac laptops (a G5 & a G4) , I've checked with the web-host/provider and all is fine there. When I used my old G4 to construct a website there was no problem of this manner. It's since iWeb 08 has been used.
    I've got the latest updates, have slimmed down the website to 'try' and make it faster (which takes away it's groovey look, which detracts the charm of the site so that's a bloomin' nuisance) and have done everything within my power/knowledge to sort this. To no avail.
    HELP!

    The business is a shop. A small one. Even before (note: BEFORE) I let anyone at all know about the site's existence I checked it out on both a Mac - my own 2 - and a dreaded Windows machine. Worked fine with Mac, but not with Windows. This isnt with any traffic other than MYSELF visiting the site! I'd love to hear of other iWeb '08 users and their sites so I can check them out to see if they have the same problem. It's strange that I didn't get this when using my iBook G4's iWeb software.
    Maybe I'll try transfering the domain file from laptop (New MacBook with iWeb '08) to laptop (Old iBook G4 with older version of iWeb) and seeing if that helps. A thorough pain in the backside if so, but at least the site will be working!
    "Technical support!!!" Lol.
    Just as an aside....what are the settings I should use at my host/web-hotel for optimum performance? I have them set already, but I want to double & triple check 'em. Better safe than sorry etc.
    Thanks in advance!!! :))

  • Windows Assessment and Deployment Kit (ADK) for Windows 2012 Server

    Hi
    I need to download Windows ADK for Windows 2012 Server. The link mentioned on microsoft website "http://www.microsoft.com/en-in/download/details.aspx?id=30718" is not reachable. Can anyone please tell me, from where I can download Windows ADK for
    2012 Server.
    Thanks
    Manik Bansal

    Hi Johan, Hi Manik,
    Your reply with the link for the Windows Assessment and Deployment Kit (ADK) for Windows® 8 at http://www.microsoft.com/en-us/download/details.aspx?id=30652 has been very much appreciated.
    I have also found a new and updated link to the *NEW* Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 at http://www.microsoft.com/en-us/download/details.aspx?id=39982 that was released and published on 2013-Oct-17.
    Please note that this ADK can be used with Windows Server 2012, but there are some important differences between the Windows 8 ADK and the Windows Server 2012 ADK. The TechNet summary of the ADK may be explored at the link http://technet.microsoft.com/en-us/library/jj200116.aspx
    The details of the ADK for Windows 8 may be explored at the link http://go.microsoft.com/fwlink/?LinkId=248647
    Thank you,
    Michael C.

  • Slow printing from windows 2008 R2 with Cisco 6509

    Dear All,
    I am having a wiered issue in my network. We have a windows 2008 R2 print server. Normal documents print's fine. If you print a image or pdf file, it takes a long time to print. For example a 2 MB PDF image with two page took me 10 minutes to print. The data from the server to the physical printer is really slow. To test it, i have loaded the driver on another windows 2008 R2 and the result is same slowness. We uses Xerox Colorqube 9303 printers.
    I have tried most options from microsoft which didnt help. I have installed a windows 2012 server to test if its specific to windows 2008, but the result remains same. Printing from a windows PC is perfectly fine; 32 bit PCs we have.
    I have seen someone got a solution to this by disabling ip local-proxy-arp, this is not enabled nor available in my switch.
    I have 6509 as core switch with IOS 12.2(33)SXH8. Does anybody come across such a scenario? Is there any special port configuration required for windows 2008 R2 to work normal?
    A sample interface configuration is given below
    GigabitEthernet1/10 is up, line protocol is up (connected)
      Hardware is C6k 1000Mb 802.3, address is c89c.1dd9.2619 (bia c89c.1dd9.2619)
      Description: ***Connect-to-Server-form***
      MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
         reliability 255/255, txload 1/255, rxload 1/255
      Encapsulation ARPA, loopback not set
      Keepalive set (10 sec)
      Full-duplex, 1000Mb/s, media type is 10/100/1000BaseT
      input flow-control is off, output flow-control is on
      Clock mode is auto
      ARP type: ARPA, ARP Timeout 04:00:00
      Last input never, output 00:00:13, output hang never
      Last clearing of "show interface" counters never
      Input queue: 0/2000/88/0 (size/max/drops/flushes); Total output drops: 0
      Queueing strategy: fifo
      Output queue: 0/40 (size/max)
      5 minute input rate 0 bits/sec, 0 packets/sec
      5 minute output rate 151000 bits/sec, 30 packets/sec
         10067885 packets input, 4366947776 bytes, 0 no buffer
         Received 36631 broadcasts (2569 multicasts)
         0 runts, 0 giants, 0 throttles
         11 input errors, 1 CRC, 0 frame, 77 overrun, 0 ignored
         0 watchdog, 0 multicast, 0 pause input
         0 input packets with dribble condition detected
         251401032 packets output, 96130506019 bytes, 0 underruns
         0 output errors, 0 collisions, 5 interface resets
         0 babbles, 0 late collision, 0 deferred
         0 lost carrier, 0 no carrier, 0 PAUSE output
         0 output buffer failures, 0 output buffers swapped out
    Any help would be really appreciated.
    Thanking you in advance.
    Prince Mathew

    Hello
    Printing from a windows PC is perfectly fine; 32 bit PCs we have.
    - Printing directly from a computer which has the locally installed driver is printing fine.- it does seem to suggest the server or the network- however locally installed print drivers work fine so the communication to the printer from the client over the network seem to be okay.
    However the centrally installed print drivers means the processing job is now  with the server which is between the printer and client
    Whats the RTT from client and server and client to printer .etc?  - perform a extended ping to validate connectivity between all 3
    Have you hardcoded the server port to the nic setting of the server - Are the speed/duplex settings manually applied to the servers  if so make sure they are also manually set on the switch ports realting to these servers - this is apllicable to the printers too.
    Is the same driver used locally is also on the printer server correct?
    Whats printing protocol ( RAW) and port being used on the printer server
    Do you have print pooling setup on the server -(typo in last post)
    Are these printer shared in A/D and deployed by GPO -are the correct permissions set on these shares
    Check the printer permission on the spool folder also - users need at least read & execute privileges
    Have you manually cleared the print spooler folder and restarted the spooler service on the server?
    Are the print jobs being render to the clients or is the server taking the load of processing the print job?
    Any printer queue priorites set?
    res
    Paul
    Please don't forget to rate any posts that have been helpful.
    Thanks.

  • Slow authentication on Windows

    I've set up small office network - 6 Windows computers + one Mac with OS X Server 10.4.4. Everything works OK (file services, open directory....) but I have one problem - when Windows users try to authenticate on domain (OS X server runs as PDC), this process is slow - about 20 seconds until logon process starts. Where the problem could be?

    There used to be a TCP delayed acknowledge problem OSX<->Windows.
    The newer Tiger net.inet.tcp.delayed_ack: 3 default(?) might be worth trying changing.
    You could try in Terminal:
    sudo sysctl -w net.inet.tcp.delayed_ack=2 (used on Windows?)
    or
    sudo sysctl -w net.inet.tcp.delayed_ack=0
    Which will alter this setting immediately.
    Change it back to "3" if it doesn't help.
    Also, workgroup/domainame is entered with UPPERCASE letters?

  • Windows Intune support deployment for windows phone (8.1) *.appx files

    Hi
    We are trying to deploy a windows phone 8.1 appx file with intune (over sccm console). the appx file is signed with a valid symantec certificate.
    the installation of the app fails, either when we upload the file as "Required" (so pushing it automatically to the devices) or when we make the app on the company portal app available. 
    in the sccm console the deployment status says failed -> unkonwn error.
    when we use .xap file of an windows 8.0 app, it works like a charm and the xap file is signed with the same certificate.
    My question is, is there no support for publishing windows phone 8.1 appx files on Intune? Or what can it be?
    Thanks for any hints

    UPDATE
    According to these links and the comments from Mitch Denny, can somebody confirm that .appx files (company apps) cannot be deployed/installed on windows phone 8.1 yet?
    http://blogs.technet.com/b/windowsintune/archive/2014/05/12/what-s-coming-next-with-windows-intune.aspx
    http://blogs.technet.com/b/windowsintune/archive/2014/04/28/availability-of-update-to-windows-intune-for-windows-phone-8-1-and-samsung-knox-standard.aspx
    I would really appreciate if someone can confirm me this, because im struggling with this since days and there is no official statement from MS.
    Thanks

  • Jabber for Windows On-Premises Deployment.

    I´m deploying a solution of CUCM BE 8.6 with CUC 8.6 and CUPS 8.6. At this momento all is working on the CUCM and CUC. But i´m not sure if all is fine on the CUPS.
    I have integrated all application whit an LDAP (Microsoft AD). Now I´m configuring Jabber for Windows and the users have IM and status monitoring (presence) working fine. But They need to have voice functionalities to make and recive calls.
    I try to make call with jabber and using the pc to make call, but just can make calls;  when some one try to call me, they receive a fast busy tone.
    Then i tried to use jabber with an IP Communicator associated to the same user; and just in this scenario other users can call me.
    The question is. On-premises deployments, jabber for windows requiere to have associated a desk phone or softphone to make and receive calls?, or i need to do some thing to give to jabber in self the ability de make and receive calls with out any other device associated?
    Thanks.

    Hi Chris, do you mean that in sofphone mode Jabber do no need the ip communicator to make an receive calls?
    Becouse right now i have jabber and a CSF configured and associated to the user. But they can not receive calls, just can make calls.
    Only when associate the ip communicator the user can receive calls.
    Any idea of what could be happenning?
    Thanks
    Hello again,
    I did some tests and a review of the configuration, but i can´t solve the issue.
    the Users with jabber for windows can receive calls but they can not make if they do.
    Only if they use an IP communicator associated to jabber client, they can make and receive calls
    Must be jabber working by in self to make and receive calls, no matter if have  or not associated a desk phone or softphone?
    What do you think i need to verified?
    I´m sending a file with screen shots to explain the issue.
    thanks in advance

  • Lightroom 3 super slow on new Windows 7 64 bit...Why?

    I've recently switched over to  Windows 7 64 bit Home Premium, running 8GB DDR3 RAM, 1GB ATI Radeon 4800  series video card, 1920px monitor and have found the performance in  Lightroom 3.4.1 much slower than I did on Windows XP, 32 bit running 2GB  of RAM with a 128MB motherboard card (laptop to boot).
    Why  is this happening? The main issues are extremely slow imports (minimal  previews set as default when importing), very delayed thumbnail  (preview) rendering (the grid view sometimes sits with half the  thumbnails rendered, and half not rendered, then all of a sudden, a  minute or two later, all will be rendered...), and slow, in-consistent  1:1 rendering. I've tried all the different combos when it comes to  preview rendering but nothing does the trick. I've even tried switching  my 10GB LR3 (ACR?) cache to different drives but nothing does the trick.
    Could  this be an issue with the Catalyst Control Center (software controling  my video driver)? It's all I've got left to consider but would very much  like a resolution.
    Thanks in advance.

    Try the performance optimization tips here first:
    http://kb2.adobe.com/cps/400/kb400808.html
    Optimize your catalog(s), render 1:1 previews on import, and make sure your Cache folder isn't near the setting in LR preferences. If necessary, increase your Cache size and see if that helps.
    If you regularly use Standby Mode to turn off your system, try shutting down Windows AND REMOVE AC POWER. If you have other connected devices (storage, camera, game, etc.) that use a separate power supply, disconnect them from AC power as well. Wait at least 10 seconds, then restore AC power to all devices, and reboot your system. This called a "cold boot," which will insure restoring ALL hardware devices, operating system, background applications and drivers to a known good state.
    When I'm done for the day my OS is "Shut Down" and the main AC power strip turned off. It is the ultimate surge protection – NO CONNECTION. When I reboot the next morning I know all my system memory and other resources are freed up and available for my designated usage.
    Following these guidelines I have absolutely no issues running LR 3.4.1 on my Windows 7 64 bit system.

  • Slow motion on windows xp pro

    Hello,
    I'm on windows xp pro by boot camp and I have sometimes some slow motion. It's a problem when i'm listening music. I didn't find virus with avast antivirus and my computer used to be clean with Ccleaner and Spybot search and destroy.
    What can i do?

    I would post in the Boot Camp forum area here:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Slow Printing in Windows 7

    We are currently going through an upgrade from XP to Windows 7 for our fleet and all seems to be going ok but printing has started to become slow and sometimes printing does not work at all and then works the following day.
    We are changing from XP 32bit to Win 7 64 bit and we are upgrading our iPrint service to the virtual appliance from Novell for Windows 7 only.
    The printing is intermittent between users and machine and sometimes even applications. For example we have one user who was working fine for the last few weeks but yesterday could not print Word, Excel or PDF on a machine but today can print everything.
    Another user on the same machine has not had issues (that have been reported).
    I have tried setting up the network printer as direct IP to se if there was any difference and yesterday via the iPrint client which has direct IP enabled and the TCP/IP printer set up it took 3 minutes to print a test page for the printer via both services.
    I don't believe this is a Novell iPrint issue and I have even changed driver from the UPD to the Win7 OS driver for the HP LaserJet P4015. I have also had the same issue on a Ricoh MP 2550B printer.
    So having checked drivers, printers and  iPrint server, I am now wondering is it either networking or something inside Win 7 and one of it's own services causing this. Would really like some help as at a loss to explain this to users and find a fix. 

    I would suggest you to check with the manufacturer first for any Win 7 specific settings. 
    Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
    the thread.

Maybe you are looking for