Slow OSx Startup with Windows Normal?

I recently installed Windows 7 on my 2013 iMac (OSx 10.8.5) using Bootcamp 5. The default startup system is OSx. The startup operation seems excessively slow -- startup takes more than 1 1/2 minutes before the Apple logo appears and more than 2 minutes before I can logon. Is this a normal consequence of the dual-system operation?

I cant speak for the iMac, but if you have a regular HHD with your iMac, it should be a bit slower than SSD. I have the new rMBP 15" and it takes me about 18-20 seconds max from a cold boot to all the way in the desktop (Windows 7 Ultimate x64 SP1) .

Similar Messages

Oracle startup with Windows

We have Oracle 10g (x64) installed on a Windows XP Pro x64 computer, along with ASM. When the computer reboots, both instances start up, but the database instance doesn't actually open the database on startup. So far, I've checked some registry settings (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraDb10g_home2) to make sure that autostart was set to true (which it was). I don't know of anything else to check or change to get the database to actually fully start with Windows. We're having this problem with several computers and I'm hoping somebody can help.

jbo5112 wrote:
We have Oracle 10g (x64) installed on a Windows XP Pro x64 computer, along with ASM. When the computer reboots, both instances start up, but the database instance doesn't actually open the database on startup. So far, I've checked some registry settings (HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraDb10g_home2) to make sure that autostart was set to true (which it was). I don't know of anything else to check or change to get the database to actually fully start with Windows. We're having this problem with several computers and I'm hoping somebody can help.My word you've had some interesting answers. Oracle provides the ORADIM utility as mentioned already to manage oracle database services on windows. You can see the syntax by issuing the command on it's own in a cmd window - eg
ORADIM: <command> [options]. Refer to manual.
Enter one of the following command:
Create an instance by specifying the following options:
     -NEW -SID sid | -SRVC srvc | -ASMSID sid | -ASMSRVC srvc [-SYSPWD pass]
[-STARTMODE auto|manual] [-SRVCSTART system|demand] [-PFILE file | -SPFILE]
[-SHUTMODE normal|immediate|abort] [-TIMEOUT secs] [-RUNAS osusr/ospass]
Edit an instance by specifying the following options:
     -EDIT -SID sid | -ASMSID sid [-SYSPWD pass]
[-STARTMODE auto|manual] [-SRVCSTART system|demand] [-PFILE file | -SPFILE]
[-SHUTMODE normal|immediate|abort] [-SHUTTYPE srvc|inst] [-RUNAS osusr/ospass]
Delete instances by specifying the following options:
     -DELETE -SID sid | -ASMSID sid | -SRVC srvc | -ASMSRVC srvc
Startup services and instance by specifying the following options:
     -STARTUP -SID sid | -ASMSID sid [-SYSPWD pass]
[-STARTTYPE srvc|inst|srvc,inst] [-PFILE filename | -SPFILE]
Shutdown service and instance by specifying the following options:
     -SHUTDOWN -SID sid | -ASMSID sid [-SYSPWD pass]
[-SHUTTYPE srvc|inst|srvc,inst] [-SHUTMODE normal|immediate|abort]
Query for help by specifying the following parameters: -? | -h | -helpThe above from a 10.2 database install gives you the clue that
1) You don't need to delete and recreate, you'll be able to edit the service.
2) The current parameter for the password for sysdba access is -SYSPWD though in older versions it was -INTPWD.
In addition you should certainly check the Oracle alert log for errors on attempted startup, and the oradim.log for errors encountered when the database itself is started by oardim (you'll find this in %ORACLE_HOME%\database . If I were guessing then I'd hazard a guess that the ASM instance was not fully open before the database was started. The alert log will tell you that.
If you do find it's the ASM problem then a couple of solutions present themselves.
1) don't rely on automatic start, but set the services to manual and then schedule a shell script at startup that starts the services using "net start servicename"
2) Edit the OracleServiceSID to make it dependent on the ASM service using the procedure in http://support.microsoft.com/kb/193888
Niall Litchfield
http://www.orawin.info/

SMB Extremely Slow over VPN With Windows Server 2003

Hello everyone,
I finally convinced another person at my law firm to switch to a MacBook Pro. In preparation, I am attempting to fix any compatibility problems that would put off this new user. Unfortunately, our IT guy recently switched us to a Sonicwall SSL-VPN 200. I can connect to our server through the VPN client with no problems and I can mount our internal file server, but the connection is incredibly slow. My initial reaction was that it must be a problem with Windows Server 2003 and SMB, but I was previously able to connect to and operate on our VPN through our old Fortinet (ipsec) device with no problems. Simply put, directory switching, file moving, etc. are all now incredibly slow over the VPN. Help!

Full support for SMB signing did not appear until Samba 3.0.2 released in 2004. Mac OS X 10.5 (Leopard) supports SMB signing. Previous versions require either disabling SMB signing server-side, using a third party SMB client, using the command-line smbclient program, or updating samba yourself.

Slow log on with Windows XP / Active directory

Hi
I have been trying to work out what is causing my computers to take a long time to log on. The computers are Windows XP and take roughly a 1minute to log on(at worse).
I have turned on userenv debugging and reviewed the files. I think the problem may be related to DNS but not 100% sure.
Please could someone review the log below and see if I am looking in the right direction. Thanks (I've cut the log down slightly)
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CheckGPOs: No GPO changes but couldn't read extension EFS recovery's status or policy time.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Extension EFS recovery skipped with flags 0x6.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Processing extension 802.3 Group Policy
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Extension 802.3 Group Policy skipped with flags 0x6.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Processing extension Group Policy Printers
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Processing extension Group Policy Shortcuts
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Processing extension Microsoft Offline Files
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CheckGPOs: No GPO changes but couldn't read extension Microsoft Offline Files's status or policy time.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Extension Microsoft Offline Files skipped with flags 0x6.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Processing extension Software Installation
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:000 CheckGPOs: No GPO changes but couldn't read extension Software Installation's status or policy time.
USERENV(36c.a98) 15:23:07:000 ProcessGPOs: Extension Software Installation skipped because both deleted and changed GPO lists are empty.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy
time.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists
are empty.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Processing extension IP Security
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Extension IP Security skipped with flags 0x6.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Processing extension Group Policy Internet Settings
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Extension Group Policy Internet Settings skipped because both deleted and changed GPO lists are
empty.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Processing extension Group Policy Start Menu Settings
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO lists are
empty.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Processing extension Group Policy Regional Options
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CheckGPOs: No GPO changes but couldn't read extension Group Policy Regional Options's status or policy time.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Extension Group Policy Regional Options skipped because both deleted and changed GPO lists are
empty.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Processing extension Group Policy Power Options
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: -----------------------
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Processing extension Group Policy Applications
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CompareGPOLists: The lists are the same.
USERENV(36c.a98) 15:23:07:015 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
USERENV(36c.a98) 15:23:07:015 ProcessGPOs: Extension Group Policy Applications skipped because both deleted and changed GPO lists are empty.
USERENV(36c.a98) 15:23:07:015 SetFgRefreshInfo: Previous User Fg policy Synchronous, Reason: NonCachedCredentials.
USERENV(36c.a98) 15:23:07:015 SetFgRefreshInfo: Next User Fg policy Asynchronous, Reason: NoNeedForSync.
USERENV(36c.a98) 15:23:07:031 ProcessGPOs: No WMI logging done in this policy cycle.
USERENV(36c.a98) 15:23:07:031 LeaveCriticalPolicySection: Critical section 0x80c has been released.
USERENV(36c.a98) 15:23:07:031 ProcessGPOs: User Group Policy has been applied.
USERENV(36c.a98) 15:23:07:031 ProcessGPOs: Leaving with 1.
USERENV(36c.a98) 15:23:07:031 ApplyGroupPolicy: Leaving successfully.
USERENV(36c.ed8) 15:23:07:031 GPOThread: Next refresh will happen in 103 minutes
USERENV(36c.ee4) 15:23:07:031 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(36c.650) 15:23:07:031 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(36c.370) 15:23:07:187 IsSyncForegroundPolicyRefresh: Asynchronous, Reason: NoNeedForSync
USERENV(36c.f40) 15:23:07:187 IsSyncForegroundPolicyRefresh: Asynchronous, Reason: NoNeedForSync
USERENV(36c.f40) 15:23:07:187 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(f00.f04) 15:23:07:265 LibMain: Process Name: C:\WINDOWS\system32\userinit.exe
USERENV(c4.c0) 15:23:07:500 LibMain: Process Name: C:\WINDOWS\system32\userinit.exe
USERENV(118.7c) 15:23:07:671 LibMain: Process Name: C:\WINDOWS\system32\userinit.exe
USERENV(3a8.3cc) 15:23:07:765 ImpersonateUser: Failed to impersonate user with 5.
USERENV(3a8.3cc) 15:23:07:765 GetUserNameAndDomain Failed to impersonate user
USERENV(3a8.3cc) 15:23:07:781 ImpersonateUser: Failed to impersonate user with 5.
USERENV(3a8.3cc) 15:23:07:781 GetUserDNSDomainName: Failed to impersonate user
USERENV(3a8.3cc) 15:23:07:781 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(c4.c0) 15:23:07:796 GetProfileType: Profile already loaded.
USERENV(c4.c0) 15:23:07:812 GetProfileType: ProfileFlags is 0
USERENV(888.890) 15:23:07:843 LibMain: Process Name: C:\WINDOWS\Explorer.EXE
USERENV(434.9c) 15:23:07:921 LibMain: Process Name: C:\WINDOWS\system32\WgaTray.exe
USERENV(434.9c) 15:23:07:921 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(434.9c) 15:23:07:968 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(888.978) 15:23:08:046 GetProfileType: Profile already loaded.
USERENV(888.978) 15:23:08:046 GetProfileType: ProfileFlags is 0
USERENV(888.978) 15:23:08:046 GetProfileType: Profile already loaded.
USERENV(888.978) 15:23:08:046 GetProfileType: ProfileFlags is 0
USERENV(888.9d4) 15:23:08:078 GetProfileType: Profile already loaded.
USERENV(888.9d4) 15:23:08:078 GetProfileType: ProfileFlags is 0
USERENV(710.3a0) 15:23:08:156 LibMain: Process Name: C:\WINDOWS\system32\wbem\wmiprvse.exe
USERENV(51c.67c) 15:23:09:640 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(51c.67c) 15:23:09:671 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(e78.b00) 15:23:10:750 LibMain: Process Name: C:\WINDOWS\system32\RUNDLL32.EXE
USERENV(e14.e20) 15:23:11:125 LibMain: Process Name: C:\WINDOWS\Creator\Remind_XP.exe
USERENV(43c.b5c) 15:23:11:125 LibMain: Process Name: C:\WINDOWS\system32\RUNDLL32.EXE
USERENV(e14.e20) 15:23:11:250 GetProfileType: Profile already loaded.
USERENV(e14.e20) 15:23:11:250 GetProfileType: ProfileFlags is 0
USERENV(a64.b50) 15:23:11:437 LibMain: Process Name: C:\WINDOWS\system32\mobsync.exe
USERENV(fc8.ac) 15:23:12:015 LibMain: Process Name: C:\Program Files\Common Files\Adobe\ARM\1.0\AdobeARM.exe
USERENV(54c.550) 15:23:13:515 LibMain: Process Name: C:\WINDOWS\system32\ctfmon.exe
USERENV(54c.550) 15:23:13:968 GetProfileType: Profile already loaded.
USERENV(54c.550) 15:23:14:093 GetProfileType: ProfileFlags is 0
USERENV(9e0.9dc) 15:23:15:109 LibMain: Process Name: C:\WINDOWS\system32\imapi.exe
USERENV(888.978) 15:23:17:421 GetProfileType: Profile already loaded.
USERENV(888.978) 15:23:17:421 GetProfileType: ProfileFlags is 0
USERENV(51c.67c) 15:23:17:656 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(36c.efc) 15:23:22:031 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(f68.970) 15:23:22:250 LibMain: Process Name: C:\WINDOWS\system32\NOTEPAD.EXE
USERENV(d0.f28) 15:23:22:312 LibMain: Process Name: C:\WINDOWS\system32\userinit.exe
USERENV(eec.f18) 15:28:16:531 LibMain: Process Name: C:\Program Files\AVG\AVG10\avgdiagex.exe
USERENV(71c.f5c) 15:32:30:703 LibMain: Process Name: C:\Program Files\OCS Inventory Agent\ocsinventory.exe
USERENV(71c.f5c) 15:32:30:703 ImpersonateUser: Failed to impersonate user with 5.
USERENV(71c.f5c) 15:32:30:703 GetUserNameAndDomain Failed to impersonate user
USERENV(71c.f5c) 15:32:30:718 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(71c.f5c) 15:32:30:718 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(71c.f5c) 15:32:30:750 ImpersonateUser: Failed to impersonate user with 5.
USERENV(71c.f5c) 15:32:30:750 GetUserNameAndDomain Failed to impersonate user
USERENV(71c.f5c) 15:32:30:750 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(71c.f5c) 15:32:30:750 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(71c.f5c) 15:32:30:796 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(71c.f5c) 15:32:30:968 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(71c.f5c) 15:32:31:000 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(71c.f5c) 15:32:31:000 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(93c.97c) 15:32:55:609 LibMain: Process Name: C:\Program Files\AVG\AVG10\avgcmgr.exe
USERENV(534.4b8) 15:34:01:421 LibMain: Process Name: C:\Program Files\OCS Inventory Agent\ocsinventory.exe
USERENV(534.4b8) 15:34:01:421 ImpersonateUser: Failed to impersonate user with 5.
USERENV(534.4b8) 15:34:01:421 GetUserNameAndDomain Failed to impersonate user
USERENV(534.4b8) 15:34:01:421 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(534.4b8) 15:34:01:421 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(534.4b8) 15:34:01:437 ImpersonateUser: Failed to impersonate user with 5.
USERENV(534.4b8) 15:34:01:437 GetUserNameAndDomain Failed to impersonate user
USERENV(534.4b8) 15:34:01:437 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(534.4b8) 15:34:01:437 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(534.4b8) 15:34:01:484 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(534.4b8) 15:34:01:640 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(534.4b8) 15:34:01:671 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(534.4b8) 15:34:01:687 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(224.7c8) 15:34:20:968 GetUserDNSDomainName: MyGetUserNameEx failed for NameDnsDomain style name with 5
USERENV(224.7c8) 15:34:20:968 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(224.7c8) 15:34:22:562 GetUserDNSDomainName: MyGetUserNameEx failed for NameDnsDomain style name with 5
USERENV(224.7c8) 15:34:22:562 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(224.7c8) 15:34:22:562 GetUserDNSDomainName: MyGetUserNameEx failed for NameDnsDomain style name with 5
USERENV(224.7c8) 15:34:22:562 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(fb4.dc4) 15:35:54:140 LibMain: Process Name: C:\Program Files\OCS Inventory Agent\ocsinventory.exe
USERENV(fb4.dc4) 15:35:54:140 ImpersonateUser: Failed to impersonate user with 5.
USERENV(fb4.dc4) 15:35:54:140 GetUserNameAndDomain Failed to impersonate user
USERENV(fb4.dc4) 15:35:54:140 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(fb4.dc4) 15:35:54:140 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(fb4.dc4) 15:35:54:140 ImpersonateUser: Failed to impersonate user with 5.
USERENV(fb4.dc4) 15:35:54:140 GetUserNameAndDomain Failed to impersonate user
USERENV(fb4.dc4) 15:35:54:156 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(fb4.dc4) 15:35:54:156 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(fb4.dc4) 15:35:54:187 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(fb4.dc4) 15:35:54:343 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(fb4.dc4) 15:35:54:375 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(fb4.dc4) 15:35:54:390 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(94c.e78) 15:37:21:812 LibMain: Process Name: C:\Program Files\OCS Inventory Agent\ocsinventory.exe
USERENV(94c.e78) 15:37:21:812 ImpersonateUser: Failed to impersonate user with 5.
USERENV(94c.e78) 15:37:21:812 GetUserNameAndDomain Failed to impersonate user
USERENV(94c.e78) 15:37:21:812 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(94c.e78) 15:37:21:828 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(94c.e78) 15:37:21:828 ImpersonateUser: Failed to impersonate user with 5.
USERENV(94c.e78) 15:37:21:828 GetUserNameAndDomain Failed to impersonate user
USERENV(94c.e78) 15:37:21:828 GetUserDNSDomainName: Domain name is NT Authority. No DNS domain name available.
USERENV(94c.e78) 15:37:21:828 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(94c.e78) 15:37:21:890 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(94c.e78) 15:37:22:031 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(94c.e78) 15:37:22:078 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(94c.e78) 15:37:22:078 ProcessAutoexec: Cannot process autoexec.bat.
USERENV(ad4.764) 15:39:07:424 LibMain: Process Name: C:\WINDOWS\system32\verclsid.exe

Hi
IT is taking 5 mins after Userinit process. There might be issue with that also.
Userinit isresponsible for reconnecting network drives, running logon scripts, etc. I would guess that something of that nature is actually causing the delay. Isolate the user/computer account in an OU with block inheritance set and see if the issue continues.
Also, do you have any logon scripts or mapped drives set on the user account? If so, you may want to remove those and see if that helps the issue. If so you may have a problem with slow network connectivity.
You can also try
How to perform advanced clean-boot troubleshooting in Windows XP
http://support.microsoft.com/kb/316434
In addition to above suggestion, the following two links might be helpful for you to resolve the issue.
http://blogs.technet.com/askds/archive/2009/09/23/so-you-have-a-slow-logon-part-1.aspx
http://blogs.technet.com/askds/archive/2009/09/23/so-you-have-a-slow-logon-part-2.aspx

Slow download performance with windows 7 on Cisco 2960S

has someone experience with the the windows 7 on Cisco 2960S.
One customer had the issue with very slow download rate ( 500kByte) with 100MB / full duplex and default tcp paramenter under win 7 with IOS 12.2.55SE1.
No error was seen.
The change of follwing in windows improve the performance a litte bit to 1-2 MByte.
no compression, no tcp windowing, no received side scaling, no windows side heuristic, no checksum offloading and a smaller MTU size than default.
After update the Switch to 12.2.55.SE2 the performance imporve to 4-12 MByte.
Has someone an idea about the chances in IOS 12.2.55SE2. I cant find anything in RN about this issue.
Best regards
Steffen

I have the same issues in WS-C2960G-48TC-L . my downloads dropped in my lan from 2 mb/s to 100kb/s in all operating systems including linux workstations . my ios version is 12.2(44)SE5 in 2960 switches .
i have 2 x 4503-E L3 and 14 2960-48TC-L switches but i can not access the new ios versions to test if the issue is coming from ios version because of end of support .
can someone ensure that the new ios remove this issue ?

Slow wifi connection with windows 8

Hi! I have a problem with wifi drivers for windows 8 on my MacBook Air. The OS works great but wifi is too slow. I've read that could be a bug with latest driver versions, can you tell me where I can find older versions? Or there's another solution that I don't know?
I tried to search for answers on this community but I can't find anything.
Thanks,
Luca

I just found solution for my problem It seems that there is compatibility problem between Cisco 120N wireless router and new iPad 3'rd generation. The problem is occurs in WiFi "N" mode only. Once I switched the Cisco 120N wireless router to the "BG-mixed" mode than the WiFi transfer on my iPad is as good as on other devices. And when I switched my Cisco 120N to "Wireless-N Only" than the problems with WiFi transfer were unbearable, which clearly points out the incompatibilities to the N-mode only.
I begin to wonder though whether are there any wireless routers that would properly work with new iPad in "N" mode? Could you please let me know with which Cisco/Linksys/Netgear/D-Link/TP-link wireless routers iPad 3 works well in N mode?

Slowness at startup with Adobe Premiere Elements 11 inside a Proxy

Hi all
I recently started working for a state government agency, we have 2 users in our department that have Adobe Premiere Elements 11 installed (they have for quite a while) I noticed while working on their PC that Photoshop elements can take 5-10 minutes to start once they click on video editor and new Project, also the help files do not work they produce a page cannot be found error.
I am replacing there PC in a standard upgrade rollout schedule and I have noticed the same issue on their new PC's, after looking into this I thought I would try the application on the same PC but connected up to a standard ADSL line outside of our network and proxy, the application opens with 10-15 seconds and the help menus are working.
Is there any exceptions I could ask our network administrators to put into the proxy to allow the traffic out and in to fix this issue.
The PC is running Adobe Premiere Elements 11
Windows 7 x32 install
The PC far exceeds the minimum requirements for the application as listed on this website.
Any help would be great, thank you in advance for your time.

I don't think these are directly related to your problem, buy may offer some hints
Any Premiere doesn't work properly, if at all, over a network
-see messages #1 and #3 in http://forums.adobe.com/thread/771151
-you MUST give all users administrator accounts to use Premiere
-and especially Encore dual layer http://forums.adobe.com/thread/969395
-#5 Server 2008 is UNsupported http://forums.adobe.com/thread/851602
-a work around, of sorts http://forums.adobe.com/thread/957523
-and not on a "domain" http://forums.adobe.com/thread/858977
-http://helpx.adobe.com/premiere-pro/kb/networks-removable-media-dva.html
-also PreEl see #5 http://forums.adobe.com/thread/1017199
-more PreEl problem http://forums.adobe.com/thread/975117

MP560 on a Mac OSX networked with Windows 7, recognizes network but doesn't print text

I have a Canon Pixma MP560 connected to a MacBook Pro with OS 10.9.5 which is wire-networked through a Time Warner Arris TG862 modem to a Dell Latitude E6410 laptop and a Lenovo desktop, both of which have Windows 7. The printer is USB cable connected to the MacBook, and works fine. On the Mac, at System Preferences>>Sharing, Printer Sharing is selected, the MP560 highlighted, and at Users>>"Everyone Can Print"; and at System Preferences>>Printers & Scanners, "Share this printer on the network" is selected. On the Lenovo and Dell, I installed Bonjour, and both can "see" the MP560, and at File>Print on both, the printer is recognized and activated. BUT all it does is shoot out a blank sheet of paper; the text is not printed. Evidently there is something I have not done, some box I have not checked off. I will appreciate any ideas! Thanks.
Solved!
Go to Solution.

Some days after posting here, I asked this question at another Canon website, and learned that in circumstances similar to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh", rather than, as in my case, having the MP560 connected to the Mac and then shared with the Windows computers.

Macbook pro very slow at startup, with often "repair disk" demand

I have a mid2009 15'' macbook pro. I have an issue of it being veery slow and some times non-responsive for no reason. It also takes a considerable extended time to startup.
I use only 35-40% of the HD, i have the least posible apps opening at startup, i keep desktop clean etc.
Another thing that is strange is that very often when i perform VERIFY DISK, most times it sais i need to repair from partition (can happen even every day or two)
Is my disk failing? Is there any way to test it?
Note: My optical drive is not working any more (like the drive of every mac owner after 2-3 years ) so i cant use the Hardware Test Cd.Is there any other way?

chewath wrote:
Note: My optical drive is not working any more (like the drive of every mac owner after 2-3 years ) so i cant use the Hardware Test Cd.Is there any other way?
Use an external drive.

Itunes sometimes slow to launch with Windows XP

Sometimes itunes opens in about 4 seconds, and sometimes it takes between 10 to 12 seconds before I even see the itunes screen. Is this delay normal? Can anyone explain why this delay only occurs sometimes?
Thanks in advance for your help.

I have noticed this too. When using Itunes (without an Ipod) in the past few months, my PC has taken over a minute to boot up Itunes. I often have several other applications open at the same time. I also notice that music that I play in Itunes "jitters" from time to time. Other MP3 playing software (e.g Winamp, Napster, Rhapsody) never lag or "jitter". Is Itunes very RAM demanding versus other programs?
Today, when connecting a new Ipod Nano for the first two times, it took amost 3 minutes for Itunes to actually appear on the screen! We have not connected a third time yet.
4G Nano Windows XP

Bridge CS6 crashes on startup with Windows Vista

I have just installed Adobe Bridge CS6 on a Windows Vista system. When I try to open it I get a message "Adobe Bridge CS6 has stopped working". The program won't open. Solutions?

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Adobe Bridge forum, where you'll get more specialized help.

Windows 8.1 - Slow Restart/Pause with SSD

Windows community,
I am new to these forums, so forgive me if I am posting in the incorrect place.
My system specs:
ASUS ROG
C drive runs on an 120 GB SSD, has 33 GB of space remaining
Processor: Intel Core i7-4700HQ @ 2.40 GHz
RAM: 16 GB
System: Windows 8.1 64-bit
Graphics Card: Nvidia 770m, 3 GB
My problem:
I have been experiencing slow restart times (about 1 minute).
Details:
Not long ago, I refreshed the system, and re-installed all my programs. Shortly thereafter, I began to experience slow restart times. I assume that the slow restart is due to a process or driver/system update, but I cannot be sure what is causing
my problem.
What I see:
The blue shut down/restart screen is displayed with the little white dot animation. After about 5-10 seconds, the animation will pause. Then, after about 45-50 seconds, the animation will move again and the system finally restarts.
Thanks in advance for any help! I can provide more details as needed.

Hi Parker,
Firstly, let's update all device drivers and Windows updates.
If the issue persists, as S.Sengupta said, perform a Clean boot to see if it's caused by some third-party software or service startup with Windows.
Both of these don't work, collect the boot trace for analysis:
https://helgeklein.com/blog/2013/07/analyzing-a-slow-boot-with-windows-performance-recorder-analyzer/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Karen Hu
TechNet Community Support

Slow startup- new pavilion with windows 8

Hi there, I have only recently purchased a hp pavilion with the product key being: F5B53EA#ABU
The first few times I turned it on it was incredibly fast and I was impressed. I have moved my document from my old laptop onto it (not very many, just mainly word documents and pictures) and I have already uninstalled unecessary programmes however the start up is very slow compared to what it was before, I have to leave my laptop for 5-7 mins and then come back to see if it has finally started. Any help would be very appreciated.

Hello 2010freemana,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your computer starting up slowly and are looking for assistance in getting it fixed. I have seen issues where certain Windows components are not re-initializing properly if the Fast Startup option is enabled. This is enabled, by default. Perform the following to disable it:
Step 1. Open Control Panel.
Step 2. Choose Hardware and Sound / Power Options.
Step 3. Click on Choose what the power button does on the left side menu.
Step 4. Click on Change settings that are currently unavailable at the top.
Step 5. Scroll down and Remove the check mark from the Turn on fast startup (recommended) option under Shutdown settings. Select the Save Changes button and exit Control Panel.
Step 6. Shut down (Not Restart) the computer, wait a few minutes and then start the computer.
As well I have seen this issue when people have an Anti-Virus installed with Windows 8. If the issue persists try disabling or uninstalling your Anti-Virus and see if that resolves your slow startup issue.
I believe this will resolve your slow start up issue in Windows 8. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Server 4, Very slow SMB on 10.10 Yosemite with windows 7 clients.

A few weeks ago I did the upgrade to server 4 on a Mac mini Server running 10.10.2 The end result is that my windows 7 clients are unable to use windows SMB filesharing. They connect as normal, but can only achieve a throttled down transfer speed of 256KBps. Extremely Slow. FTP from windows 7 explorer to the osx server share is fast as normal. Any ideas as to why? This upgrade has completely broke my server.

I tried it with one user,
I'd run
sudo find /path/to/folder -name .DS_Store -exec rm {} \;
on the server.
Disclaimer:
.DS_Store have their purpose ie they store spotlight comments among other stuff (icon positions, finder view...)
-Ralph

Slow OSx Startup with Windows Normal?

Similar Messages

Maybe you are looking for