Slow page loading even though speed test is fine

Hi all, I have noticed that pages and content are very slow to load over the last few days. I ran the speed test and the results are fine (37mb down 8mb up). I thought it may have been Firefox because it can play up. After testing with Chrome and IE9 I can confirm it is definitely not right.
Anyone else having problems? I am on the Macclesfield exchange. Connected via ethernet directly to the HH3.

Infinity fitted Tuesday. 37.8mb down, 1.8mb up. Pages are slower to load than before my upgrade ! As a non techy with computers, you must excuse any embarrassing blunders with technical issues, but, I have found if I use AltaVista instead of Google, everything is fine. If I type fast into the search bar on Google it can't keep up with me ! If I try to deleate the www entry a character at a time, it goes in fits and starts as it receeds back across the screen. I had no problems with the site till the upgrade. Is it just a problem with Google and the increased speeds or is that too simple an answer !!
RAYH
RAYH

Similar Messages

Slow page loads over LAN with 500GB TC

Hello,
Forgive me if this has already been touched on, I tried to run through the first six pages and didn't see anything that I thought matched my problem. I saw that there were reports of slow wireless speeds, but I have been experiencing problems over the wired connection to my TC
I have a MBP connected to the TC wirelessly and a Mac Pro with a wired connection to the TC. They both render similar speeds in a speed test ~4Mbits down, but on my Mac Pro, I get excruciatingly slow page loads. Pages often take, on average, 15-20 seconds to come up at all, and some more time to finish loading completely. Meanwhile, I can load the same pages in a few seconds with my MBP over the wireless network.
My cable coming from the TC to my Mac Pro is brand new, its at least CAT5e, and should be able to handle my down speeds without a problem. So I'm at a loss for what could be causing this. Could it be something with the computer and not the TC at all?
Thanks,
Scott

Well, creating a test user put me on the right path. Deleting the systemconfiguration folder did not help, but I deleted the following files out of the $user/library/preferences folder:
com.apple.internetconfig.plist
com.apple.internetconfigpriv.plist
com.apple.internetconnect.plist
com.apple.networkConnect.000a27b47970.plist
com.apple.preference.internet.plist
com.apple.PrefPane.Network.000a27b47970.plist
Basically any preference with "Network" or "Internet" in it and everything sped up immediately. Thanks for the help.

Slow page loads only since 10.4 upgrades

Hi folks,
Has anyone seen a problem with pages hanging up after updating from earlier OS X's to 10.4? First my wife noticed it when she got her new Mac Book -- an upgrade from 10.2.8 on the old machine. A couple of items would load on a page, but then it hangs up and stalls for a while until finally fully loading. Ordinarily, I'd peg it as just being slow serving of ads to particular sites, but it's not always ad-rich sites. And more so, it's strange that this only started happening in conjunction with starting to use 10.4 to surf the same sites that weren't hanging up before.
Further confirming my belief that it has to do with 10.4, is that upon my upgrading from 10.3 to 10.4 on my G5 a month or so later, I started to immediately notice slow, slow page loads on that machine, too. Particularly, again, on sites that loaded fine with 10.3 just before the upgrade.
I'm also having more problems with mailboxes loading slowly and kicking off-line since the upgrade.
Is there some trick to get 10.4 to behave with regard to requests across the web??
Thanks!!!!
G5 Dual 1.8 Mac OS X (10.4.7) Focusrite Saffire Audio Interface

me too. My mini is wired, but I have the same trouble. I have a PC on the same router, and it has no problem with internet. I've been looking around a while, and it seems like this is a common occurrence and I have not found a fix yet. This is very frustrating. Also, the network status in the network diagnostics window shows the internet failing alot, but even when it's "green" I still can't always load pages.

Slow page loading / Time outs

Hi guys,
I am getting very slow page loading times. This only started to happen today, before this my connection has been solid.
I have reset the router, all the other PCs in my house are having the same problem. I am not running any P2P/Downloading software.
Speedtest says I am connected at 12MBPs. It takes me a very long time to load a page and most of the time they just time out.
Router stats -
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.5
Latency type Interleaved
Noise margin (Down/Up) 3.6 dB / 5.7 dB
Line attenuation (Down/Up) 29.5 dB / 12.7 dB
Output power (Down/Up) 0.0 dBm / 12.9 dBm
Cheers

Keith_Beddoe wrote:
There appears to be a problem with the BT DNS servers at the moment. They keep going offline.
Hopefully someone is aware and dealing.
Which ones are you using ? BT have LOTS of machines providing DNS services
I'm currently using:
Primary: 194.72.9.38
Secondary: 194.72.0.114
...and haven't really noticed anything untoward all day, and I've been online and active for most of the day. Not much longer though - soon finished, then it's beer
I have seen quite a few reports of slow loading pages etc elsewhere though.

IPhone does not come up as a device on my PC when ITunes loads even though it is connected via USB

IPhone does not come up as a device on my PC when ITunes loads even though it is connected via USB

Hi ICF Vic,
Thanks for visiting Apple Support Communities.
You can use our iPhone Troubleshooting Assistant to resolve the connection issue you're seeing:
iPhone not appearing in iTunes
http://www.apple.com/support/iphone/assistant/itunes/
All the best,
Jeremy

Blank Page prints even though "Suppress Printing If No Records" option is t

Blank Page prints even though "Suppress Printing If No Records" option is thicked.
My environment:
Crystal Report Developer Full version 11.5.11.1470
Windows Server 2003 SP2 32-bit.
We have a third party vendor application written in Java -let's call it "print deamon", but my company doesn't have access to the source code.
The print deamon essentially listens to the core application which is located remotely, receive some print instructions such as label name, printer name, crystal reports version (8.5 or 11) and a few parameters that are passed to the crystal report template.
When the version is Crystal Reports 11 and the template is open and query is executed (using Oracle JDBC) and if the template's query does not retrieve any rows, a blank page still prints even though the option to suppress printing is thicked.
With Crystal Reports 8.5 version, we have no issues.
recycling the blank page is not an option in our high volume print environment, these paper and labels are wasted big time, third party vendor says this is an issue with crystal reports XI api.
These are some of the libraries the Print Deamon uses:
09/25/2009 10:29 AM         2,055,844 cecore.jar
09/25/2009 10:29 AM           211,919 celib.jar
09/25/2009 10:29 AM           830,301 corbaidl.jar
09/25/2009 10:29 AM           371,142 CRDBJavaServerCommon.jar
09/25/2009 10:29 AM           121,413 CRDBXMLServer.jar
09/25/2009 10:29 AM           670,312 CrystalCharting.jar
09/25/2009 10:29 AM             2,162 CrystalCommon.jar
09/25/2009 10:29 AM            94,290 CrystalContentModels.jar
09/25/2009 10:28 AM           110,657 CrystalDatabaseConnectors.jar
09/25/2009 10:29 AM           686,963 CrystalExporters.jar
09/25/2009 10:29 AM            67,807 CrystalExportingBase.jar
09/25/2009 10:29 AM           581,270 CrystalFormulas.jar
09/25/2009 10:29 AM           330,909 CrystalQueryEngine.jar
09/25/2009 10:29 AM         2,271,217 CrystalReportEngine.jar
09/25/2009 10:29 AM           453,829 CrystalReportingCommon.jar
09/25/2009 10:29 AM         1,985,441 ebus405.jar
09/25/2009 10:29 AM    <DIR>          external
09/25/2009 10:29 AM           227,996 jrcadapter.jar
09/25/2009 10:29 AM             9,988 jrcerom.jar
09/25/2009 10:29 AM            94,180 keycodeDecoder.jar
09/25/2009 10:29 AM           448,627 MetafileRenderer.jar
09/25/2009 10:29 AM           380,520 rasapp.jar
09/25/2009 10:29 AM           843,544 rascore.jar
09/25/2009 10:29 AM           283,131 ReportPrinter.jar
09/25/2009 10:29 AM           793,445 ReportViewer.jar
09/25/2009 10:29 AM            95,382 rpoifs.jar
09/25/2009 10:29 AM            40,545 Serialization.jar
09/25/2009 10:29 AM             3,777 URIUtil.jar
Let me know if there's anything we can do before engaging our third party vendor to produce their source code.
Thank you - Kleber

It's not relavent now is it? Do what ever works in CR XI.
Also you may want to upgrade to CR XI R2. Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Once updated you can then go to the Keycode site and get a XI R2 keycode to enable oll of the features.
Thank you
Don

After using my macbook for 2 years with same printer,all of a sudden I can't print a page doc even though printer is working and I can print from I/Mail, etc.Anybody had this happen and have a possible answer?

After using my MacBook Pro and pages for 2 years with the same printer, all of a sudden I can't print a pages doc even though the printer works and I can print from I/Mail, etc. Anyone have a possible answer?

Often printing problems are a sign of corrupt preferences. Go to HD > Users > (your account) > Library > Preferences, delete the com.apple.iwork.pages.plist file & then restart Pages.

DEP in Windows xp wont let iTunes load even though I have listed iTunes

Windows XP wont let me load iTunes the DEP programe stops it loading even though I have named iTunes as allowed

Check to see if Quicktime works, iTunes can't work if quicktime doesn't.
If Quicktime doesn't work post the full error message.

Firefox insists on opening last page visited even though it's supposed to open on home page.

My Firefox insists on opening last page visited even though it's supposed to open on home page.
Bad job guys, this is dumb, I am disappointed.
I've followed instructions found in the following links with no luck:
https://support.mozilla.org/en-US/questions/833603
https://support.mozilla.org/en-US/questions/1019367
https://support.mozilla.org/en-US/questions/1018231
I deleted sessionstore.js it worked once but the issue re-occured afterwards. I don't have the file user.js.

Make sure that Firefox closes properly to prevent Session Restore from reopening those tabs.
Use "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit) to close Firefox if you are currently doing that by clicking the close X on the Firefox title bar.
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible).
You can leave the sessionstore.bak file with the time stamp appended that Firefox creates automatically in case of updating.
There is software like Advanced SystemCare with its Surfing Protection feature that can protect files in the Firefox profile folder against changes.
If you have such software then check the settings or uninstall this software.

After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
== This happened ==
Every time Firefox opened
== Upgrading to newer Firefox version (3.6.8)

I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
Did you ever find anything more to this?

S4 slow page load and email wont receive auto

I got the s4 1 week ago came from an iphone, so far not impressed! Slow page load time and email although set automatic wont load. phone is very slow! what should I do?

Hello G433062,
Have no fear Verizon is here! I am so sorry that you are having an issue with the Samsung S4 opening page slowly. We want you love your phone! Has this been an issue when you are using the Internet application? Or is it slow at opening any application? Have you tried to clear the history: http://vz.to/1g2WXjg Please keep us posted.
KevinR_VZW
Please follow us on Twitter @VZWSupport

HT204266 My iphone keeps crashing and turning itself off.....even though battery life is fine...as soon as i plug charger in it comes bcak on....help very frustrating...3g

My iphone keeps crashing and turning itself off.....even though battery life is fine...as soon as i plug charger in it comes bcak on....help very frustrating...3g

absolutely that is frustrating. if the battery life is fine there could be two things software or hardware. to find out if your back up your information in itunes and import pictures and then restore the phone as NEW then you can test it out. if it is still shutting off it is hardware related

Cannot Log-On even though the internet works fine?

Cannot Log-On even though the internet works fine? I have not made any changes to my system. Anyone else having the same problem. My handle is an AIM handle, if this helps. Is it because its the first of a new year?
Thanks in Advance!
Mark

I found out its my IM archiving company thats is down. Global Relay.
Thanks anyway!
Mark

Cannot print wirelessly to a new HP B210 though configuration test is fine.

Cannot print wirelessly to a new HP B210 though configuration test is fine. It keeps coming up, "not connected" or "oof line". I have a 5 year old Linksys Router and connect perfectly to 2 iPads and a new Mac Pro wirelessly all over the house.

Based on what you just expressed, the hardware may be working. However, the software/ firmware is not functioning correctly.
Mario
I worked on behalf of HP.

Slow page loads, dropped connection

Hi,
Looking for some advice here. I write for the web for a living, and spend most of my day online. I'm not happy with the speed of my connection right now, and am considering upgrading to a faster package. I'm currently on the 768k to 1.5Mbps DSL package.
The problem is, I don't get anywhere near the speed I'm paying for now. Page load times go from speedy to drop dead slow (20-30 secs), and often hang. I'm not sure what's going on, although I can say my mother has the same problems at her house (next town over, same DSL package). I can't see paying for a "faster" package when I don't even get the speed I should be now.
Here are some stats. Hoping someone can take a look and give me some thoughts about whether a speed upgrade would be worth it.
Verizon speed test:
Analysis information:
Checking for Middleboxes . . . . . . . . . . . . . . . . . . Done
SendBufferSize set to [132480]
running 10s outbound test (client to server) . . . . . 481.45Kb/s
running 10s inbound test (server to client) . . . . . . 138.24kb/s
------ Client System Details ------
OS data: Name = Mac OS X, Architecture = x86_64, Version = 10.6.8
Java data: Vendor = Apple Inc., Version = 1.6.0_24
------ Web100 Detailed Analysis ------
Client Receive Window detected at 524280 bytes.
Cable modem/DSL/T1 link found.
Link set to Full Duplex mode
Information: throughput is limited by other network traffic.
Good network cable(s) found
Normal duplex operation found.
Web100 reports the Round trip time = 155.6 msec; the Packet size = 1440 Bytes; and
There were 40 packets retransmitted, 2 duplicate acks received, and 0 SACK blocks received
The connection stalled 2 times due to packet loss
The connection was idle 1.05 seconds (8.07%) of the time
This connection is sender limited 22.57% of the time.
This connection is network limited 77.42% of the time.
Excessive packet loss is impacting your performance, check the auto-negotiate function on your local PC and network switch
Web100 reports TCP negotiated the optional Performance Settings to:
RFC 2018 Selective Acknowledgment: ON
RFC 896 Nagle Algorithm: ON
RFC 3168 Explicit Congestion Notification: OFF
RFC 1323 Time Stamping: ON
RFC 1323 Window Scaling: ON
Information: Network Middlebox is modifying MSS variable
Server IP addresses are preserved End-to-End
Information: Network Address Translation (NAT) box is modifying the Client's IP address
Server says [72.68.84.139] but Client says [192.168.0.4]
Broadband Speed Reports tests:
Parsippanny, NJ (closest server) -
Download 210 kbps
Upload 367 kbps
latency 40 ms
Washington, DC -
Download 794 kbps
Upload 347 kbps
latency 24 ms
Los Angeles -
Download 423 kbps
Upload 333 kbps
latency 124 ms
Router stats:
ADSL Link Downstream Upstream
Connection Speed 1792 kbps 448 kbps
Line Attenuation 17.0 db 7.5 db
Noise Margin 30.3 db 21.0 db
I think my transceiver stats look good for higher speeds, but I'm wondering why I get such inconsistent and generally slow download speeds now.
Thanks for your help.
Debbie

Has the line been performing any better since the last post? If not, find a time where it is working poorly and register an account over at DSLReports.com if you don't already have one. Fron there, visit their Tools section of their site and perform the Line Quality/Ping test. Be sure that before you start the test, your router/modem is not blocking Pings since this will result in the test having less data. Also, ensure nothing is using your connection before and during the time of the test being ran. Post up the results of the test once it has been completed.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Slow page loading even though speed test is fine

Similar Messages

Maybe you are looking for