Slow PAT
Hello every one , my 865pe neo2-s bios v1.4 its performance is stuck to slow
if i change it to fast,turbo or Ultra turbo it crashes and make random restart
and force it back to slow mode
i use the specs below :-
Quote
psu (no brand)250 watt +3.3@16a,/+5@25,/+12@9a
That would be my first guess, I see you plan to change it soon. Once you change that, I bet you get an improvement in overall perfomance, even without OC'ing.
Similar Messages
-
So this is my status now (with the new BIOS 1.50) on my 865PE Neo2-FIS2R:
When Performace Mode is "fast, turbo, ultra turbo" PAT is activated (Sandra shows that)
In Performance Mode "slow" PAT is not activated.
The system is stable ONLY with "slow" setting. At "fast, turbo, ultra turbo" there are symptoms like kick2desktop, systems hangs, and so on X( Regardless if the RAM-Timing is at 2-3-3-7 or 2-2-3-5 (see signature).
Sandra shows the correct RAM-Timings.
OC: I can go up to 220 MHz FSB on 1:1. But the system isn´t as fast as i expected. But it´s stable.
I get 16600 Points @ 3DMark2001... thats quite crappy ^^
Well... i am really not satisfied... X(Update:
I´ve just tested RAM-Timings 2,5 - 4 - 4 - 8, Burst 8. So RAM is VERY slow
Even with these settings, PAT (fast, turbo, ultra-turbo) leads to system-hangs and kick2desktop X( -
Possible to put two or more 3.5 SATA drives in optical bay of early 2008 mac pro?
Hello! A question about expansion really. Here is my iexpansion plan. Wondering if you can see any possible problems?
drive bay 1 - SSD - raid with drive 2
drive bay 2 - SSD - raid with drive 1
These will make the boot drive.
Then...
drive bay 3 - 3.5" sata - raid with drive 4
drive bay 4 - 3.5" sata - raid with drive 3
Two extra internal eSATA ports being extended out with wires to an empty PCI slot, leading to two external 3.5" drives in eSATA interfaced, self-powered enclosures.
Optical Bay - Removing the two currently installed optical drives and replacing with two 3.5" SATA drives. In order to do this I'll need to get some form of ATAPI to SATA adapter as my early 2008 macpro uses the older interface.
So my question is:
Can you see any reason why this would not work and if you can point me towards an adapter that might work for holding/converting the interface of those two 3.5" drives in the optical bay? Will there be enough space for the adapter? I'll probably rig my own bracket for holding the drives there but any suggestions welcome!
Will power become an issue? I'm also running a flashed PC graphics card which uses both of the additional power ports (rather than just one). But other than that nothing extra.
Many thanks for your time!Hi Hatter,
Thanks for your reply. I'm not so worried about the SSDs as I am about the ability to put 2x3.5" SATA drives into the optical bay and have them fit (I do not want to pay a lot of money for any fancy pieces of metal such as the one you linked) when they necessary PATA-SATA adapter and power supply adapter if attached to them. Have you ever seen someone do this and what adatper did they use? I'm looking at this sort of thing:
http://www.cooldrives.com/satoidecofor.html
I can not put the SSDs in the Optical bay because the slower PATA interface would cut the speed so much it would not be worth it.
Any tips on known reports of 2x 3.5" drives fitting in there would be great, and what adapter was used.
Thanks! -
Hi,
Are there 7200 RPM internal HD's available for my Titanium PowerBook G4 (400 MHz)?
If so, can anyone recommend a good source?
Thanks,
WmHi, Wm. Yes, there are 7200 RPM drives that are compatible with your computer. They range up to a maximum capacity of 100GB, and they are now hard to find. I suspect this is because a) drive manufacturers perceive much greater demand for high-capacity notebook drives than for 7200-RPM notebook drives, at least among buyers of drives using the PATA/ATA-6/ATA-7/ATA-IDE interfaces (all variants and variant designations of the same basic interface type); and b) apparently it's harder to build a high-capacity 7200-RPM drive with any of those interfaces than it is to build one with the SATA interface that nearly all current laptop models use. 7200-RPM SATA drives are readily available in much larger capacities than 100GB
A 100GB drive is now considered small, so no computer manufacturer today is going to build a 100GB drive into a new computer. Nor is any manufacturer going to build the older, slower PATA/ATA-6/ATA-7/ATA-IDE interface into any new computer. That double-whammy makes it unrewarding for drive manufacturers to continue the production of 7200-RPM PATA drives of the kind you seek for your Powerbook. Nearly all currently-manufactured PATA drives, from the smallest (40GB) to the largest (250GB) units, spin at 5400 RPM, and they are all substantially faster, quieter and cooler-running than the old 4200-RPM drive that was original equipment in your Tibook. Buy one soon, because in the relatively near future you can reasonably expect all PATA drives to become much scarcer. SATA is already dominant, and will become more so as most of the notebook computers in current use reach end-of-life over the next two or three years.
Message was edited by: eww -
Slow auto-detect times for PATA drive
Problem:
Very long auto-detect times for the PATA drive. During boot up, the system pauses at "auto-detecting" for this drive, for about 30 seconds. This is by far the longest period in my entire boot process. Occassionally the drive is not found at all, and I cannot boot. When I go into the BIOS, it's identified correctly. This is my OS/apps drive (the SATA drive is solely for audio and video). Any ideas? Also, is there a way I can get my system running in Native mode without losing the DVD drive?
My system:
865PE NEO2-FISR
1x160GB WD PATA drive, IDE 1, last spot on cable, jumpered as master
1x120GB WD SATA drive, SATA 1, jumpered as factory
1xOptoRite DVD-RW, IDE2, last spot on cable, jumpered as master
BIOS Setup:
Legacy/PATA+SATA (I tried both Native settings--SATA only/Keep PATA enabled, PATA only/Keep SATA enabled, but the system could not see my DVD-RW drive in either setting).BIOS 1.7. I'm going to take the jumper off, thanks for that information. Should I set my DVDRW to cable select?
I also see that the beta BIOS fixes some problems with similar HDD issues, so I guess I'll try that if it isn't fixed by the jumper. -
Internet Connection Became Slow after Introduction of Cisco ASA 5505 to the Network
I configured a Cisco ASA 5505 (Version Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
in transparent firewall mode and inserted after Cisco 1700 router. However, the internet connection became very slow and users are compaining that they cannot load any pages.
My setup looks like:
Internet --> Cisco 1700 --> Cisco ASA 5505 --> LAN
The license information is:
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
The flash activation key is the SAME as the running key.
My running-config looks like:
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
domain-name default.domain.invalid
enable password 8Ry2YjIyt7RRXU24 encrypted
names
interface Vlan1
nameif inside
security-level 100
no shut
interface Vlan2
nameif outside
security-level 0
no shut
interface Ethernet0/0
switchport access vlan 2
no shut
interface Ethernet0/1
no shut
interface Ethernet0/2
no shut
interface Ethernet0/3
no shut
interface Ethernet0/4
no shut
interface Ethernet0/5
no shut
interface Ethernet0/6
no shut
interface Ethernet0/7
no shut
passwd 2KFQnbNIdI.2KYOU encrypted
regex urllist1 ".*\.([Ee][Xx][Ee]|[Cc][Oo][Mm]|[Bb][Aa][Tt]) HTTP/1.[01]"
regex urllist2 ".*\.([Pp][Ii][Ff]|[Vv][Bb][Ss]|[Ww][Ss][Hh]) HTTP/1.[01]"
regex urllist3 ".*\.([Dd][Oo][Cc]|[Xx][Ll][Ss]|[Pp][Pp][Tt]) HTTP/1.[01]"
regex urllist4 ".*\.([Zz][Ii][Pp]|[Tt][Aa][Rr]|[Tt][Gg][Zz]) HTTP/1.[01]"
regex domainlist1 "\.facebook\.com"
regex domainlist2 "\.diretube\.com"
regex domainlist3 "\.youtube\.com"
regex domainlist4 "\.vimeo\.com"
regex applicationheader "application/.*"
regex contenttype "Content-Type"
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list outside_in extended permit ip any any
access-list inside_mpc extended permit tcp any any eq www
access-list inside_mpc extended permit tcp any any eq 8080
pager lines 24
mtu outside 1500
mtu inside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group outside_in in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.1.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domainlist1
match regex domainlist2
match regex domainlist3
match regex domainlist4
class-map type inspect http match-all BlockDomainsClass
match request header host regex class DomainBlockList
class-map type regex match-any URLBlockList
match regex urllist1
match regex urllist2
match regex urllist3
match regex urllist4
class-map inspection_default
match default-inspection-traffic
class-map type inspect http match-all AppHeaderClass
match response header regex contenttype regex applicationheader
class-map httptraffic
match access-list inside_mpc
class-map type inspect http match-all BlockURLsClass
match request uri regex class URLBlockList
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map type inspect http http_inspection_policy
parameters
protocol-violation action drop-connection
class AppHeaderClass
drop-connection log
match request method connect
drop-connection log
class BlockDomainsClass
reset log
class BlockURLsClass
reset log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map inside-policy
class httptraffic
inspect http http_inspection_policy
service-policy global_policy global
service-policy inside-policy interface inside
prompt hostname context
Cryptochecksum:8ab1a53df6ae3c202aee236d6080edfd
: end
Could the slow internet connection be due to license limitations? Or is there something wrong with my configuration?
Please see the configuration and help.
ThanksI have re-configured the ASA 5505 yesterday and so far it's working fine. I am not sure if the problem will re-appear later on. Anyways here is my sh tech-support
ciscoasa# sh tech-support
Cisco Adaptive Security Appliance Software Version 7.2(3)
Device Manager Version 5.2(3)
Compiled on Wed 15-Aug-07 16:08 by builders
System image file is "disk0:/asa723-k8.bin"
Config file at boot was "startup-config"
ciscoasa up 14 hours 16 mins
Hardware: ASA5505, 256 MB RAM, CPU Geode 500 MHz
Internal ATA Compact Flash, 128MB
BIOS Flash M50FW080 @ 0xffe00000, 1024KB
Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Boot microcode : CNlite-MC-Boot-Cisco-1.2
SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
0: Int: Internal-Data0/0 : address is 001f.9ee8.ffa2, irq 11
1: Ext: Ethernet0/0 : address is 001f.9ee8.ff9a, irq 255
2: Ext: Ethernet0/1 : address is 001f.9ee8.ff9b, irq 255
3: Ext: Ethernet0/2 : address is 001f.9ee8.ff9c, irq 255
4: Ext: Ethernet0/3 : address is 001f.9ee8.ff9d, irq 255
5: Ext: Ethernet0/4 : address is 001f.9ee8.ff9e, irq 255
6: Ext: Ethernet0/5 : address is 001f.9ee8.ff9f, irq 255
<--- More --->
7: Ext: Ethernet0/6 : address is 001f.9ee8.ffa0, irq 255
8: Ext: Ethernet0/7 : address is 001f.9ee8.ffa1, irq 255
9: Int: Internal-Data0/1 : address is 0000.0003.0002, irq 255
10: Int: Not used : irq 255
11: Int: Not used : irq 255
Licensed features for this platform:
Maximum Physical Interfaces : 8
VLANs : 3, DMZ Restricted
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
VPN Peers : 10
WebVPN Peers : 2
Dual ISPs : Disabled
VLAN Trunk Ports : 0
This platform has a Base license.
Serial Number: JMX1211Z2N4
Running Activation Key: 0xaf0ed046 0xbcf18ebf 0x80b38508 0xba785cc0 0x05250493
Configuration register is 0x1
Configuration has not been modified since last system restart.
<--- More --->
------------------ show clock ------------------
18:32:58.254 UTC Tue Nov 26 2013
------------------ show memory ------------------
Free memory: 199837144 bytes (74%)
Used memory: 68598312 bytes (26%)
Total memory: 268435456 bytes (100%)
------------------ show conn count ------------------
1041 in use, 2469 most used
------------------ show xlate count ------------------
0 in use, 0 most used
------------------ show blocks ------------------
SIZE MAX LOW CNT
0 100 68 100
<--- More --->
4 300 299 299
80 100 92 100
256 100 94 100
1550 6174 6166 6174
2048 1124 551 612
------------------ show blocks queue history detail ------------------
History buffer memory usage: 2136 bytes (default)
------------------ show interface ------------------
Interface Internal-Data0/0 "", is up, line protocol is up
Hardware is y88acs06, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 001f.9ee8.ffa2, MTU not set
IP address unassigned
18491855 packets input, 11769262614 bytes, 0 no buffer
Received 213772 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops, 0 demux drops
18185861 packets output, 11626494317 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 late collisions, 0 deferred
<--- More --->
0 input reset drops, 0 output reset drops
input queue (curr/max packets): hardware (0/0) software (0/0)
output queue (curr/max packets): hardware (0/55) software (0/0)
Control Point Interface States:
Interface number is unassigned
Interface Internal-Data0/1 "", is administratively down, line protocol is up
Hardware is 88E6095, BW 1000 Mbps
(Full-duplex), (1000 Mbps)
MAC address 0000.0003.0002, MTU not set
IP address unassigned
18184216 packets input, 11625360131 bytes, 0 no buffer
Received 206655 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 switch ingress policy drops
18490057 packets output, 11768078777 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Loopback0 "_internal_loopback", is up, line protocol is up
Hardware is VirtualMAC address 0000.0000.0000, MTU 1500
IP address 127.1.0.1, subnet mask 255.255.0.0
<--- More --->
Traffic Statistics for "_internal_loopback":
1 packets input, 28 bytes
1 packets output, 28 bytes
1 packets dropped
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Control Point Interface States:
Interface number is 28
Interface config status is active
Interface state is active
Interface Vlan1 "inside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa2, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "inside":
7742275 packets input, 903584114 bytes
10645034 packets output, 10347291114 bytes
184883 packets dropped
1 minute input rate 320 pkts/sec, 35404 bytes/sec
1 minute output rate 325 pkts/sec, 313317 bytes/sec
<--- More --->
1 minute drop rate, 17 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
Control Point Interface States:
Interface number is 1
Interface config status is active
Interface state is active
Interface Vlan2 "outside", is up, line protocol is up
Hardware is EtherSVI
MAC address 001f.9ee8.ffa3, MTU 1500
IP address 192.168.1.254, subnet mask 255.255.255.0
Traffic Statistics for "outside":
10750090 packets input, 10432619059 bytes
7541331 packets output, 870613684 bytes
109911 packets dropped
1 minute input rate 328 pkts/sec, 313770 bytes/sec
1 minute output rate 301 pkts/sec, 32459 bytes/sec
1 minute drop rate, 2 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
Control Point Interface States:
Interface number is 2
<--- More --->
Interface config status is active
Interface state is active
Interface Ethernet0/0 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
Available but not configured via nameif
MAC address 001f.9ee8.ff9a, MTU not set
IP address unassigned
10749794 packets input, 10630700889 bytes, 0 no buffer
Received 2506 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
3 switch ingress policy drops
7541070 packets output, 1028190148 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/1 "", is up, line protocol is up
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex(Full-duplex), Auto-Speed(100 Mbps)
<--- More --->
Available but not configured via nameif
MAC address 001f.9ee8.ff9b, MTU not set
IP address unassigned
7741977 packets input, 1064586806 bytes, 0 no buffer
Received 211282 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
10644663 packets output, 10543362751 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/2 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9c, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
<--- More --->
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/3 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9d, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
<--- More --->
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/4 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9e, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
<--- More --->
Interface number is unassigned
Interface Ethernet0/5 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ff9f, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/6 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
<--- More --->
MAC address 001f.9ee8.ffa0, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
Interface Ethernet0/7 "", is down, line protocol is down
Hardware is 88E6095, BW 100 Mbps
Auto-Duplex, Auto-Speed
Available but not configured via nameif
MAC address 001f.9ee8.ffa1, MTU not set
IP address unassigned
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
<--- More --->
0 L2 decode drops
0 switch ingress policy drops
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collisions, 0 deferred
0 lost carrier, 0 no carrier
0 rate limit drops
0 switch egress policy drops
Control Point Interface States:
Interface number is unassigned
------------------ show cpu usage ------------------
CPU utilization for 5 seconds = 12%; 1 minute: 11%; 5 minutes: 11%
------------------ show cpu hogging process ------------------
Process: Dispatch Unit, NUMHOG: 1, MAXHOG: 133, LASTHOG: 140
LASTHOG At: 04:45:59 UTC Nov 26 2013
PC: 8be0f7
Traceback: 8bed19 8bf553 302b87 3030a5 2fad69 7674bf 75ca16
c6251d c62a4c c62f6c 75c653 767820 797f64 769c85
<--- More --->
------------------ show process ------------------
PC SP STATE Runtime SBASE Stack Process
Mwe 00c9bb24 01bb8700 013e3250 0 01733fc8 15616/16384 emweb/cifs
Lwe 001072ac 0176f9c4 013e32d0 0 0176d9f0 8132/8192 block_diag
Mrd 00223a67 01783d5c 013e33b0 314854 0177be18 25752/32768 Dispatch Unit
Msi 00f82847 01b07b84 013e3250 229 01b05bc0 7984/8192 y88acs06 OneSec Thread
Mwe 0011b1a5 01b09cfc 013e3250 0 01b07d88 7864/8192 Reload Control Thread
Mwe 00120606 01b1260c 013e5258 0 01b10988 7256/8192 aaa
Mwe 001486aa 01b19404 013e5ae8 0 01b15450 16020/16384 CMGR Server Process
Mwe 0014c3c5 01b1b4d4 013e3250 0 01b19570 7968/8192 CMGR Timer Process
Lwe 002227a1 01b239b4 013ee360 0 01b219f0 7524/8192 dbgtrace
Mwe 004e1ba5 01b29c34 013e3250 157 01b27d50 6436/8192 eswilp_svi_init
Mwe 01064b1d 01b4a7f4 013e3250 0 01b48890 7848/8192 Chunk Manager
Msi 008b61b6 01b52d54 013e3250 230 01b50da0 7856/8192 PIX Garbage Collector
Lsi 00ecb6ac 01b54e94 013e3250 12 01b52ec0 7552/8192 route_process
Mwe 008a5ddc 01b5dc04 0133b430 0 01b5bc40 8116/8192 IP Address Assign
Mwe 00acb779 01b60604 01346e10 0 01b5e640 8116/8192 QoS Support Module
Mwe 0091eba9 01b6275c 0133c530 0 01b60798 8116/8192 Client Update Task
Lwe 01083c8e 01b656d4 013e3250 123088 01b63770 7840/8192 Checkheaps
Mwe 00acfd7d 01b6b824 013e3250 623 01b69ad0 3476/8192 Quack process
Mwe 00b2a260 01b6dad4 013e3250 22 01b6bbf0 7364/8192 Session Manager
Mwe 00c55efd 01b78564 031d0478 4 01b74a50 14768/16384 uauth
<--- More --->
Mwe 00be3c9e 01b7aaec 0135c010 0 01b78b28 7524/8192 Uauth_Proxy
Mwe 00c52759 01b80e0c 01361770 0 01b7ee88 7712/8192 SMTP
Mwe 00c3f7b9 01b82eec 01361710 0 01b80fa8 7412/8192 Logger
Mwe 00c3fd26 01b8502c 013e3250 0 01b830c8 7492/8192 Thread Logger
Mwe 00f62272 01b9596c 013ac520 0 01b939c8 7188/8192 vpnlb_thread
Msi 00b4097c 01c598c4 013e3250 190 01c578f0 8000/8192 emweb/cifs_timer
Msi 005bd338 017a909c 013e3250 25855 017a7108 7412/8192 arp_timer
Mwe 005c76bc 01b486e4 013fba50 20643 01b46770 7348/8192 arp_forward_thread
Mwe 00c5a919 023fa5fc 013619e0 0 023f8648 7968/8192 tcp_fast
Mwe 00c5a6e5 023fc624 013619e0 0 023fa670 7968/8192 tcp_slow
Mwe 00c754d1 0240d42c 013628a0 0 0240b478 8100/8192 udp_timer
Mwe 0019cb17 01b404a4 013e3250 0 01b3e530 7984/8192 CTCP Timer process
Mwe 00efe8b3 0308c15c 013e3250 0 0308a208 7952/8192 L2TP data daemon
Mwe 00efef23 0308e194 013e3250 0 0308c230 7968/8192 L2TP mgmt daemon
Mwe 00eea02b 030c62ac 013a5c10 43 030c2338 16244/16384 ppp_timer_thread
Msi 00f62d57 030c82f4 013e3250 264 030c6360 7924/8192 vpnlb_timer_thread
Mwe 001b96e6 01b7cbbc 01b1e9c8 1 01b7ac48 7728/8192 IPsec message handler
Msi 001c9bac 01b8d4dc 013e3250 2917 01b8b548 7648/8192 CTM message handler
Mwe 00af93b8 031465b4 013e3250 0 03144640 7984/8192 ICMP event handler
Mwe 00831003 0314a724 013e3250 387 031467b0 16100/16384 IP Background
Mwe 0021b267 031a83c4 013123c0 31 03188450 123488/131072 tmatch compile thread
Mwe 009f2405 03290044 013e3250 0 0328c0c0 16072/16384 Crypto PKI RECV
Mwe 009f305a 03294144 013e3250 0 032901e0 16040/16384 Crypto CA
Mwe 0064d4fd 01b3e24c 013e3250 8 01b3c2f8 7508/8192 ESW_MRVL switch interrupt service
<--- More --->
Msi 00646f5c 032c134c 013e3250 3059378 032bf448 7184/8192 esw_stats
Lsi 008cbb80 032dc704 013e3250 3 032da730 7908/8192 uauth_urlb clean
Lwe 008afee7 034a0914 013e3250 197 0349e9b0 6636/8192 pm_timer_thread
Mwe 0052f0bf 034a35ac 013e3250 0 034a1648 7968/8192 IKE Timekeeper
Mwe 00520f6b 034a8adc 0132e2b0 0 034a4e38 15448/16384 IKE Daemon
Mwe 00bf5c78 034ac7ac 01360680 0 034aa7f8 8100/8192 RADIUS Proxy Event Daemon
Mwe 00bc32de 034ae79c 034dcbe0 0 034ac918 7208/8192 RADIUS Proxy Listener
Mwe 00bf5e0f 034b099c 013e3250 0 034aea38 7968/8192 RADIUS Proxy Time Keeper
Mwe 005aac4c 034b3154 013fb980 0 034b1250 7492/8192 Integrity FW Task
M* 008550a5 0009fefc 013e33b0 3183 034e3b20 24896/32768 ci/console
Msi 008eb694 034ed9d4 013e3250 2370 034ebc40 6176/8192 update_cpu_usage
Msi 008e6415 034f7dac 013e3250 1096 034f5eb8 6124/8192 NIC status poll
Mwe 005b63e6 03517d1c 013fbd10 1963 03515d78 7636/8192 IP Thread
Mwe 005becbe 03519e4c 013fbcb0 3 03517e98 7384/8192 ARP Thread
Mwe 004c2b36 0351befc 013fbae0 0 03519fe8 7864/8192 icmp_thread
Mwe 00c7722e 0351e06c 013e3250 0 0351c108 7848/8192 udp_thread
Mwe 00c5d126 0352008c 013fbd00 0 0351e228 7688/8192 tcp_thread
Mwe 00bc32de 03a6982c 03a5ee18 0 03a679b8 7512/8192 EAPoUDP-sock
Mwe 00266c15 03a6b614 013e3250 0 03a699e0 7032/8192 EAPoUDP
Mwe 005a6728 01b27b94 013e3250 0 01b25c30 7968/8192 Integrity Fw Timer Thread
- - - - 47686621 - - scheduler
- - - - 51253819 - - total elapsed
------------------ show failover ------------------
<--- More --->
ERROR: Command requires failover license
------------------ show traffic ------------------
inside:
received (in 51429.740 secs):
7749585 packets905087345 bytes
67 pkts/sec17013 bytes/sec
transmitted (in 51429.740 secs):
10653162 packets10355908020 bytes
40 pkts/sec201026 bytes/sec
1 minute input rate 412 pkts/sec, 51803 bytes/sec
1 minute output rate 475 pkts/sec, 522952 bytes/sec
1 minute drop rate, 24 pkts/sec
5 minute input rate 399 pkts/sec, 59676 bytes/sec
5 minute output rate 483 pkts/sec, 503200 bytes/sec
5 minute drop rate, 9 pkts/sec
outside:
received (in 51430.240 secs):
10758403 packets10441440193 bytes
42 pkts/sec203021 bytes/sec
transmitted (in 51430.240 secs):
7548339 packets872053854 bytes
<--- More --->
63 pkts/sec16037 bytes/sec
1 minute input rate 479 pkts/sec, 523680 bytes/sec
1 minute output rate 387 pkts/sec, 46796 bytes/sec
1 minute drop rate, 3 pkts/sec
5 minute input rate 485 pkts/sec, 503789 bytes/sec
5 minute output rate 387 pkts/sec, 57681 bytes/sec
5 minute drop rate, 2 pkts/sec
_internal_loopback:
received (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51430.740 secs):
1 packets28 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Aggregated Traffic on Physical Interface
<--- More --->
Ethernet0/0:
received (in 51431.740 secs):
10758462 packets10640075825 bytes
42 pkts/sec206042 bytes/sec
transmitted (in 51431.740 secs):
7548383 packets1029818127 bytes
63 pkts/sec20023 bytes/sec
1 minute input rate 485 pkts/sec, 537048 bytes/sec
1 minute output rate 395 pkts/sec, 54546 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 485 pkts/sec, 511723 bytes/sec
5 minute output rate 387 pkts/sec, 65495 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/1:
received (in 51433.570 secs):
7749780 packets1066328930 bytes
67 pkts/sec20064 bytes/sec
transmitted (in 51433.570 secs):
10653359 packets10552787020 bytes
40 pkts/sec205006 bytes/sec
1 minute input rate 419 pkts/sec, 59621 bytes/sec
1 minute output rate 480 pkts/sec, 533950 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 399 pkts/sec, 67618 bytes/sec
<--- More --->
5 minute output rate 482 pkts/sec, 511073 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/2:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/3:
received (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.730 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
<--- More --->
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/4:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/5:
received (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51434.870 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
<--- More --->
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/6:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Ethernet0/7:
received (in 51435.010 secs):
0 packets0 bytes
0 pkts/sec0 bytes/sec
transmitted (in 51435.010 secs):
<--- More --->
0 packets0 bytes
0 pkts/sec0 bytes/sec
1 minute input rate 0 pkts/sec, 0 bytes/sec
1 minute output rate 0 pkts/sec, 0 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 0 bytes/sec
5 minute output rate 0 pkts/sec, 0 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/0:
received (in 51435.510 secs):
18513901 packets11784250044 bytes
25 pkts/sec229023 bytes/sec
transmitted (in 51435.510 secs):
18207269 packets11641332179 bytes
19 pkts/sec226078 bytes/sec
1 minute input rate 891 pkts/sec, 595715 bytes/sec
1 minute output rate 863 pkts/sec, 588935 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 885 pkts/sec, 584035 bytes/sec
5 minute output rate 870 pkts/sec, 580393 bytes/sec
5 minute drop rate, 0 pkts/sec
Internal-Data0/1:
received (in 51436.010 secs):
18207323 packets11641364184 bytes
<--- More --->
19 pkts/sec226076 bytes/sec
transmitted (in 51436.010 secs):
18513954 packets11784281987 bytes
25 pkts/sec229022 bytes/sec
1 minute input rate 855 pkts/sec, 575808 bytes/sec
1 minute output rate 884 pkts/sec, 582339 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 869 pkts/sec, 578350 bytes/sec
5 minute output rate 883 pkts/sec, 581924 bytes/sec
5 minute drop rate, 0 pkts/sec
------------------ show perfmon ------------------
PERFMON STATS: Current Average
Xlates 0/s 0/s
Connections 17/s 6/s
TCP Conns 8/s 2/s
UDP Conns 7/s 2/s
URL Access 0/s 0/s
URL Server Req 0/s 0/s
TCP Fixup 0/s 0/s
TCP Intercept 0/s 0/s
HTTP Fixup 0/s 0/s
<--- More --->
FTP Fixup 0/s 0/s
AAA Authen 0/s 0/s
AAA Author 0/s 0/s
AAA Account 0/s 0/s
------------------ show counters ------------------
Protocol Counter Value Context
IP IN_PKTS 168960 Summary
IP OUT_PKTS 169304 Summary
IP TO_ARP 61 Summary
------------------ show history ------------------
------------------ show firewall ------------------
Firewall mode: Transparent
------------------ show running-config ------------------
<--- More --->
: Saved
ASA Version 7.2(3)
firewall transparent
hostname ciscoasa
enable password
names
interface Vlan1
nameif inside
security-level 100
interface Vlan2
nameif outside
security-level 0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
<--- More --->
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
passwd
regex domain1 ".facebook\.com"
regex domain2 ".fb\.com"
regex domain3 ".youtube\.com"
ftp mode passive
access-list ACL_IN extended permit ip any any
pager lines 24
mtu inside 1500
mtu outside 1500
ip address 192.168.1.254 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-523.bin
no asdm history enable
<--- More --->
arp timeout 14400
access-group ACL_IN in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh timeout 5
console timeout 0
class-map type regex match-any DomainBlockList
match regex domain1
match regex domain2
match regex domain3
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
<--- More --->
message-length maximum 512
match domain-name regex class DomainBlockList
drop-connection log
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:bb5115ea1d14ee42e7961ef0c9aaed86
: end
<--- More --->
------------------ show startup-config errors ------------------
INFO: No configuration errors
------------------ console logs ------------------
Message #1 : Message #2 : Message #3 : Message #4 : Message #5 : Message #6 : Message #7 : Message #8 : Message #9 : Message #10 : Message #11 : Message #12 : Message #13 : Message #14 :
Total SSMs found: 0
Message #15 :
Total NICs found: 10
Message #16 : 88E6095 rev 2 Gigabit Ethernet @ index 09Message #17 : MAC: 0000.0003.0002
Message #18 : 88E6095 rev 2 Ethernet @ index 08Message #19 : MAC: 001f.9ee8.ffa1
Message #20 : 88E6095 rev 2 Ethernet @ index 07Message #21 : MAC: 001f.9ee8.ffa0
Message #22 : 88E6095 rev 2 Ethernet @ index 06Message #23 : MAC: 001f.9ee8.ff9f
Message #24 : 88E6095 rev 2 Ethernet @ index 05Message #25 : MAC: 001f.9ee8.ff9e
Message #26 : 88E6095 rev 2 Ethernet @ index 04Message #27 : MAC: 001f.9ee8.ff9d
Message #28 : 88E6095 rev 2 Ethernet @ index 03Message #29 : MAC: 001f.9ee8.ff9c
Message #30 : 88E6095 rev 2 Ethernet @ index 02Message #31 : MAC: 001f.9ee8.ff9b
Message #32 : 88E6095 rev 2 Ethernet @ index 01Message #33 : MAC: 001f.9ee8.ff9a
Message #34 : y88acs06 rev16 Gigabit Ethernet @ index 00 MAC: 001f.9ee8.ffa2
Message #35 :
Licensed features for this platform:
Message #36 : Maximum Physical Interfaces : 8
<--- More --->
Message #37 : VLANs : 3, DMZ Restricted
Message #38 : Inside Hosts : Unlimited
Message #39 : Failover : Disabled
Message #40 : VPN-DES : Enabled
Message #41 : VPN-3DES-AES : Enabled
Message #42 : VPN Peers : 10
Message #43 : WebVPN Peers : 2
Message #44 : Dual ISPs : Disabled
Message #45 : VLAN Trunk Ports : 0
Message #46 :
This platform has a Base license.
Message #47 :
Message #48 : Encryption hardware device : Cisco ASA-5505 on-board accelerator (revision 0x0)
Message #49 : Boot microcode : CNlite-MC-Boot-Cisco-1.2
Message #50 : SSL/IKE microcode: CNlite-MC-IPSEC-Admin-3.03
Message #51 : IPSec microcode : CNlite-MC-IPSECm-MAIN-2.04
Message #52 : --------------------------------------------------------------------------
Message #53 : . .
Message #54 : | |
Message #55 : ||| |||
Message #56 : .|| ||. .|| ||.
Message #57 : .:||| | |||:..:||| | |||:.
Message #58 : C i s c o S y s t e m s
Message #59 : --------------------------------------------------------------------------
<--- More --->
Message #60 :
Cisco Adaptive Security Appliance Software Version 7.2(3)
Message #61 :
Message #62 : ****************************** Warning *******************************
Message #63 : This product contains cryptographic features and is
Message #64 : subject to United States and local country laws
Message #65 : governing, import, export, transfer, and use.
Message #66 : Delivery of Cisco cryptographic products does not
Message #67 : imply third-party authority to import, export,
Message #68 : distribute, or use encryption. Importers, exporters,
Message #69 : distributors and users are responsible for compliance
Message #70 : with U.S. and local country laws. By using this
Message #71 : product you agree to comply with applicable laws and
Message #72 : regulations. If you are unable to comply with U.S.
Message #73 : and local laws, return the enclosed items immediately.
Message #74 :
Message #75 : A summary of U.S. laws governing Cisco cryptographic
Message #76 : products may be found at:
Message #77 : http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Message #78 :
Message #79 : If you require further assistance please contact us by
Message #80 : sending email to [email protected].
Message #81 : ******************************* Warning *******************************
Message #82 :
<--- More --->
Message #83 : Copyright (c) 1996-2007 by Cisco Systems, Inc.
Message #84 : Restricted Rights Legend
Message #85 : Use, duplication, or disclosure by the Government is
Message #86 : subject to restrictions as set forth in subparagraph
Message #87 : (c) of the Commercial Computer Software - Restricted
Message #88 : Rights clause at FAR sec. 52.227-19 and subparagraph
Message #89 : (c) (1) (ii) of the Rights in Technical Data and Computer
Message #90 : Software clause at DFARS sec. 252.227-7013.
Message #91 : Cisco Systems, Inc.
Message #92 : 170 West Tasman Drive
Message #93 : San Jose, California 95134-1706
ciscoasa# -
Help with Slow access or NAT to Inside Interface on ASA 9.1
I am hoping someone can help me figure this out, I did this on the PIX and it worked like a charm, but I am having some difficulty translating the configuration to an ASA.
In the PIX I performed NAT on outside traffic to a specific inside host (web server) to map to the inside interface so that return traffic would go to the same firewall the traffic came in through, The reason for this configuration was because the gateway of last resort was a different firewall and not the firewall the traffic came in through.
Now to further give you some history, the gateway of last resort is an ASA running 9.1 (Now), prior to that it was a PIX with v8.0(4), traffic to the aforementioned web server came in through the gateway of last resort), which at the time was the PIX.
However, for some reason after swapping the PIX for an ASA (same rules, updated NAT rules for 9.1) access to the same web server is slow. Not sure why, but it’s the case. To alleviate the slowness we experienced, and until I can figure out why this occurs on the ASA, I placed a PIX on the network that only listens for traffic for the web server in question. On this PIX I map to the inside interface so that traffic flow works and external clients can access the web server with no issues.
So two questions, one I would like to use the configuration I have for the web server on the PIX on the ASA to see if that setup on the ASA works better, but having difficulty translating the rules to the ASA.
Second question, has anyone experienced this type of issue (Slow access with ASA to a web server, but fast with PIX to the same web server)?
Attached a diagram of what I am currently doing?
Any help is appreciated.
Thanks.
P.S. Addresses in attached picture config are not real, but I know what they translate to.Hi,
To me you it would seem that you are looking for a NAT configurations something like this
object network SERVER-PUBLIC
host 197.162.127.6
object network SERVER-LOCAL
host 10.0.1.25
nat (outside,inside) source dynamic any interface destination static SERVER-PUBLIC SERVER-LOCAL
It will do a NAT for both the source and destination address in a single NAT configurations. It defines that a Dynamic PAT to the "inside" interface will be done for "any" traffic entering from the "outside" WHEN the destination is the SERVER-PUBLIC IP address. Naturally the SERVER-PUBLIC will untranslated to the SERVER-LOCAL in the process as this configuration handles 2 translations.
I dont know if this changes the situation at all but it should be the configuration format to handle the translation of external host to the internal interface IP address and only apply when this single public IP address is conserned.
Hope this helps
Remember to mark the reply as the correct answer if it answered your question. And/or rate helpfull answers.
Ask more if needed
- Jouni -
[SOLVED] system very slow after upgrade
I did today pacman -Syu after some time. I have Dell D630 laptop, Core 2 Duo 2x1.8GHz, 2GB RAM, VGA: Intel X3100. Now the whole system is really slow. I mean REALLY slow. Even opening terminal (urxvt) takes time. Browsing is slow. Mplayer can not handle 720p .mkv playback enymore. cpufreq-info shows both cores uses max. 1.8 GHz frequency under load. I tried top/htop/atop/iotop/powertop but found no suspicious process eating resources. Messages from error.log:
Mar 29 23:16:05 tortuga kernel: ata4.01: failed to resume link (SControl 0)
Mar 29 23:16:05 tortuga kernel: vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
Mar 29 23:16:05 tortuga kernel: vboxdrv: counter framework which can generate NMIs is active. You have to prevent
Mar 29 23:16:05 tortuga kernel: vboxdrv: the usage of hardware performance counters by
Mar 29 23:16:05 tortuga kernel: vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
I googled botth messages and as far as I can understand they are not source/symptom of my slowness.
If anybody have hint where to search, any advice will be really helpfull, because I am truly lost...
dmesg
# dmesg
Linux version 2.6.32-ARCH (thomas@evey) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Mon Mar 15 20:08:25 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680400 (usable)
BIOS-e820: 000000007f680400 - 0000000080000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x7f680 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F800000 mask FFF800000 uncachable
2 base 07F700000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000006000 (reserved)
modified: 0000000000006000 - 000000000009f000 (usable)
modified: 000000000009f000 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 000000007f680400 (usable)
modified: 000000007f680400 - 0000000080000000 (reserved)
modified: 00000000f8000000 - 00000000fc000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed18000 - 00000000fed1c000 (reserved)
modified: 00000000fed20000 - 00000000fed90000 (reserved)
modified: 00000000feda0000 - 00000000feda6000 (reserved)
modified: 00000000fee00000 - 00000000fee10000 (reserved)
modified: 00000000ffe00000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 7f363000 - 7f66fa7a
Allocated new RAMDISK: 00100000 - 0040ca7a
Move RAMDISK from 000000007f363000 - 000000007f66fa79 to 00100000 - 0040ca79
ACPI: RSDP 000fbb00 00024 (v02 DELL )
ACPI: XSDT 7f681e00 00064 (v01 DELL M08 27D70717 ASL 00000061)
ACPI: FACP 7f681c9c 000F4 (v04 DELL M08 27D70717 ASL 00000061)
ACPI: DSDT 7f682400 0613B (v02 INT430 SYSFexxx 00001001 INTL 20050624)
ACPI: FACS 7f690c00 00040
ACPI: HPET 7f681f00 00038 (v01 DELL M08 00000001 ASL 00000061)
ACPI: APIC 7f682000 00068 (v01 DELL M08 27D70717 ASL 00000047)
ACPI: ASF! 7f681c00 0007E (v32 DELL M08 27D70717 ASL 00000061)
ACPI: MCFG 7f681fc0 0003E (v16 DELL M08 27D70717 ASL 00000061)
ACPI: SLIC 7f68209c 00024 (v01 DELL M08 27D70717 ASL 00000061)
ACPI: TCPA 7f682300 00032 (v01 00000000 ASL 00000000)
ACPI: SSDT 7f680731 004CC (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
1150MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000152f024] TEXT DATA BSS ==> [0001000000 - 000152f024]
#4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#5 [0001530000 - 0001536188] BRK ==> [0001530000 - 0001536188]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000100000 - 000040ca7a] NEW RAMDISK ==> [0000100000 - 000040ca7a]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f680
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000006 -> 0x0000009f
0: 0x00000100 -> 0x0007f680
On node 0 totalpages: 521755
free_area_init_node: node 0, pgdat c13dbe60, node_mem_map c1538000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3963 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2302 pages used for memmap
HighMem zone: 292228 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 0000000000002000 - 0000000000006000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34680 r0 d22664 u2097152
pcpu-alloc: s34680 r0 d22664 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517677
Kernel command line: root=/dev/group1/arch ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007f680)
Memory: 2060220k/2087424k available (2797k kernel code, 25764k reserved, 1185k data, 412k init, 1178120k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc13e4000 - 0xc144b000 ( 412 kB)
.data : 0xc12bb55a - 0xc13e3a08 (1185 kB)
.text : 0xc1000000 - 0xc12bb55a (2797 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 1795.296 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.20 BogoMIPS (lpj=5984320)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (7184.82 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7f690c80 00043 (v01 LMPWR DELLLOM 00001001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 3 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xfea00000-0xfeafffff]
pci 0000:00:02.0: reg 18 64bit mmio pref: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
pci 0000:00:02.1: reg 10 64bit mmio: [0xfeb00000-0xfebfffff]
pci 0000:00:1a.0: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1a.1: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1d.1: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.1: reg 10 io port: [0x1f0-0x1f7]
pci 0000:00:1f.1: reg 14 io port: [0x3f4-0x3f7]
pci 0000:00:1f.1: reg 18 io port: [0x170-0x177]
pci 0000:00:1f.1: reg 1c io port: [0x374-0x377]
pci 0000:00:1f.1: reg 20 io port: [0x6fa0-0x6faf]
pci 0000:00:1f.2: reg 10 io port: [0x6eb0-0x6eb7]
pci 0000:00:1f.2: reg 14 io port: [0x6eb8-0x6ebb]
pci 0000:00:1f.2: reg 18 io port: [0x6ec0-0x6ec7]
pci 0000:00:1f.2: reg 1c io port: [0x6ec8-0x6ecb]
pci 0000:00:1f.2: reg 20 io port: [0x6ee0-0x6eef]
pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe9fbf00-0xfe9fbfff]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:0c:00.0: reg 10 32bit mmio: [0xfe8ff000-0xfe8fffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
pci 0000:09:00.0: reg 10 64bit mmio: [0xfe7f0000-0xfe7fffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.4: reg 10 32bit mmio: [0xfe6ff000-0xfe6fffff]
pci 0000:03:01.4: reg 14 32bit mmio: [0xfe6fe800-0xfe6fefff]
pci 0000:03:01.4: supports D1 D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xfe600000-0xfe6fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:0b: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0b: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp 00:0c: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 13 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:0a: ioport range 0xcb0-0xcbb has been reserved
system 00:0a: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:0b: ioport range 0x900-0x97f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0xf400-0xf4fe has been reserved
system 00:0c: ioport range 0x1080-0x10bf has been reserved
system 00:0c: ioport range 0x10c0-0x10df has been reserved
system 00:0c: ioport range 0x809-0x809 has been reserved
system 00:0d: iomem range 0x0-0x9efff could not be reserved
system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0x7f6803ff could not be reserved
system 00:0d: iomem range 0x7f680400-0x7f6fffff has been reserved
system 00:0d: iomem range 0x7f700000-0x7f7fffff has been reserved
system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved
system 00:0d: iomem range 0xffe00000-0xffffffff has been reserved
system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0d: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0d: iomem range 0xfed45000-0xfed8ffff has been reserved
system 00:0d: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0d: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0d: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0d: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0d: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: 0x2000-0x2fff
pci 0000:00:1c.0: MEM window: 0x84000000-0x841fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000084200000-0x000000843fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: 0x3000-0x3fff
pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.1: PREFETCH window: 0x00000084400000-0x000000845fffff
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: 0x4000-0x4fff
pci 0000:00:1c.5: MEM window: 0xfe700000-0xfe7fffff
pci 0000:00:1c.5: PREFETCH window: 0x00000084600000-0x000000847fffff
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x005000-0x0050ff
pci 0000:03:01.0: IO window: 0x005400-0x0054ff
pci 0000:03:01.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:03:01.0: MEM window: 0x88000000-0x8bffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x5000-0x5fff
pci 0000:00:1e.0: MEM window: 0xfe600000-0xfe6fffff
pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: enabling device (0000 -> 0003)
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:0b: resource 1 mem: [0x84000000-0x841fffff]
pci_bus 0000:0b: resource 2 pref mem [0x84200000-0x843fffff]
pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:0c: resource 1 mem: [0xfe800000-0xfe8fffff]
pci_bus 0000:0c: resource 2 pref mem [0x84400000-0x845fffff]
pci_bus 0000:09: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:09: resource 1 mem: [0xfe700000-0xfe7fffff]
pci_bus 0000:09: resource 2 pref mem [0x84600000-0x847fffff]
pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
pci_bus 0000:03: resource 1 mem: [0xfe600000-0xfe6fffff]
pci_bus 0000:03: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x5000-0x50ff]
pci_bus 0000:04: resource 1 io: [0x5400-0x54ff]
pci_bus 0000:04: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:04: resource 3 mem: [0x88000000-0x8bffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Unpacking initramfs...
Freeing initrd memory: 3122k freed
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1269905228.550:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1730
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.5: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 412k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata2: port disabled. ignoring.
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
ata1.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.01: SATA link down (SStatus 0 SControl 300)
ata3.00: ATA-7: ST9160823AS, 3.ADC, max UDMA/133
ata3.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST9160823AS 3.AD PQ: 0 ANSI: 5
ata4.01: failed to resume link (SControl 0)
ata4.00: SATA link down (SStatus 0 SControl 300)
ata4.01: SATA link down (SStatus 0 SControl 0)
sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
padlock: VIA PadLock not detected.
EXT4-fs (dm-4): INFO: recovery required on readonly filesystem
EXT4-fs (dm-4): write access will be enabled during recovery
EXT4-fs (dm-4): orphan cleanup on readonly fs
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79470
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79469
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79468
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79467
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 79466
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 48873
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 14902
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 115506
EXT4-fs (dm-4): ext4_orphan_cleanup: deleting unreferenced inode 2598
EXT4-fs (dm-4): 9 orphan inodes deleted
EXT4-fs (dm-4): recovery complete
EXT4-fs (dm-4): mounted filesystem with ordered data mode
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 151
fuse init (API version 7.13)
ACPI: SSDT 7f681138 00244 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 7f680bfd 004B6 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 7f68137c 000C4 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 7f6810b3 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
Switching to clocksource hpet
processor LNXCPU:01: registered as cooling_device1
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (95 C)
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PBTN]
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
iTCO_vendor_support: vendor-support=0
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
Linux agpgart interface v0.103
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ACPI: Battery Slot [BAT0] (battery present)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SBTN]
ACPI: WMI: Mapper loaded
ACPI: Battery Slot [BAT1] (battery absent)
tg3.c:v3.102 (September 1, 2009)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
eth0: Tigon3 [partno(BCM95755m) rev a002] (PCI Express) MAC address 00:1c:23:1c:0d:5b
eth0: attached PHY is 5755 (10/100/1000Base-T Ethernet) (WireSpeed[1])
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
input: DualPoint Stick as /devices/platform/i8042/serio1/input/input5
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:01f9]
yenta_cardbus 0000:03:01.0: O2: res at 0x94/0xD4: 00/ea
yenta_cardbus 0000:03:01.0: O2: enabling read prefetch/write burst
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm] set up 7M of stolen space
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
iwl3945: Copyright(c) 2003-2009 Intel Corporation
iwl3945 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwl3945 0000:0c:00.0: setting latency timer to 64
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0cb8, PCI irq 19
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: clean.
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
firewire_ohci 0000:03:01.4: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwl3945 0000:0c:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
iwl3945 0000:0c:00.0: Detected Intel Wireless WiFi Link 3945ABG
iwl3945 0000:0c:00.0: irq 28 for MSI/MSI-X
usb 5-1: new low speed USB device using uhci_hcd and address 2
firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
phy0: Selected rate control algorithm 'iwl-3945-rs'
usb 5-1: configuration #1 chosen from 1 choice
vboxdrv: Trying to deactivate the NMI watchdog permanently...
vboxdrv: Successfully done.
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x19e offMax=0x5df
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 3.1.4_OSE (interface 0x00100001).
usb 7-1: new full speed USB device using uhci_hcd and address 2
usbcore: registered new interface driver hiddev
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7
generic-usb 0003:046D:C025.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
firewire_core: created device fw0: GUID 384fc00038f52070, S400
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
usb 7-1: configuration #1 chosen from 1 choice
clean.
hub 7-1:1.0: USB hub found
hub 7-1:1.0: 4 ports detected
usb 7-1.2: new full speed USB device using uhci_hcd and address 3
[drm] TV-16: set mode NTSC 480i 0
usb 7-1.2: configuration #1 chosen from 1 choice
[drm] LVDS-8: set mode 1280x800 1f
CPU0: Temperature above threshold, cpu clock throttled (total events = 1)
Disabling lock debugging due to kernel taint
CPU0: Temperature/speed normal
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
registered panic notifier
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input8
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input9
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
loop: module loaded
EXT4-fs (dm-2): mounted filesystem with ordered data mode
EXT4-fs (dm-3): mounted filesystem with ordered data mode
iwl3945 0000:0c:00.0: firmware: requesting iwlwifi-3945-2.ucode
iwl3945 0000:0c:00.0: loaded firmware version 15.32.2.9
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:09:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[drm] TV-16: set mode NTSC 480i 0
[drm] TV-16: set mode NTSC 480i 0
[drm] TV-16: set mode NTSC 480i 0
[drm] TV-16: set mode NTSC 480i 0
CE: hpet increasing min_delta_ns to 15000 nsec
eth0: no IPv6 routers present
CE: hpet increasing min_delta_ns to 22500 nsec
Registered led device: iwl-phy0::radio
Registered led device: iwl-phy0::assoc
Registered led device: iwl-phy0::RX
Registered led device: iwl-phy0::TX
ADDRCONF(NETDEV_UP): wlan0: link is not ready
tg3 0000:09:00.0: PME# enabled
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:09:00.0: PME# enabled
tg3 0000:09:00.0: PME# disabled
tg3 0000:09:00.0: irq 29 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3: eth0: Link is up at 100 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
usb 5-1: USB disconnect, address 2
usb 5-1: new low speed USB device using uhci_hcd and address 3
usb 5-1: configuration #1 chosen from 1 choice
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input13
generic-usb 0003:046D:C025.0002: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
usb 5-1: USB disconnect, address 3
usb 5-1: new low speed USB device using uhci_hcd and address 4
usb 5-1: configuration #1 chosen from 1 choice
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input14
generic-usb 0003:046D:C025.0003: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
Machine check events logged
CE: hpet increasing min_delta_ns to 33750 nsec
input input14: event field not found
input input14: event field not found
usb 5-1: USB disconnect, address 4
usb 5-1: new low speed USB device using uhci_hcd and address 5
usb 5-1: configuration #1 chosen from 1 choice
input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input15
generic-usb 0003:046D:C025.0004: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1/input0
ps -Af
# ps -Af
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 Mar29 ? 00:00:00 init [5]
root 2 0 0 Mar29 ? 00:00:00 [kthreadd]
root 3 2 0 Mar29 ? 00:00:00 [migration/0]
root 4 2 0 Mar29 ? 00:00:00 [ksoftirqd/0]
root 5 2 0 Mar29 ? 00:00:00 [watchdog/0]
root 6 2 0 Mar29 ? 00:00:00 [migration/1]
root 7 2 0 Mar29 ? 00:00:00 [ksoftirqd/1]
root 8 2 0 Mar29 ? 00:00:00 [watchdog/1]
root 9 2 0 Mar29 ? 00:00:00 [events/0]
root 10 2 0 Mar29 ? 00:00:00 [events/1]
root 11 2 0 Mar29 ? 00:00:00 [khelper]
root 12 2 0 Mar29 ? 00:00:00 [async/mgr]
root 13 2 0 Mar29 ? 00:00:00 [pm]
root 14 2 0 Mar29 ? 00:00:00 [sync_supers]
root 15 2 0 Mar29 ? 00:00:00 [bdi-default]
root 16 2 0 Mar29 ? 00:00:00 [kblockd/0]
root 17 2 0 Mar29 ? 00:00:00 [kblockd/1]
root 18 2 0 Mar29 ? 00:00:00 [kacpid]
root 19 2 0 Mar29 ? 00:00:00 [kacpi_notify]
root 20 2 0 Mar29 ? 00:00:00 [kacpi_hotplug]
root 21 2 0 Mar29 ? 00:00:00 [kseriod]
root 24 2 0 Mar29 ? 00:00:00 [khungtaskd]
root 25 2 0 Mar29 ? 00:00:00 [kswapd0]
root 26 2 0 Mar29 ? 00:00:00 [ksmd]
root 27 2 0 Mar29 ? 00:00:00 [aio/0]
root 28 2 0 Mar29 ? 00:00:00 [aio/1]
root 29 2 0 Mar29 ? 00:00:00 [crypto/0]
root 30 2 0 Mar29 ? 00:00:00 [crypto/1]
root 732 2 0 Mar29 ? 00:00:01 [ata/0]
root 771 2 0 Mar29 ? 00:00:00 [ata/1]
root 800 2 0 Mar29 ? 00:00:00 [ata_aux]
root 836 2 0 Mar29 ? 00:00:02 [scsi_eh_0]
root 884 2 0 Mar29 ? 00:00:00 [scsi_eh_1]
root 930 2 0 Mar29 ? 00:00:00 [scsi_eh_2]
root 931 2 0 Mar29 ? 00:00:00 [scsi_eh_3]
root 968 2 0 Mar29 ? 00:00:00 [kstriped]
root 971 2 0 Mar29 ? 00:00:00 [kdmflush]
root 974 2 0 Mar29 ? 00:00:00 [kdmflush]
root 977 2 0 Mar29 ? 00:00:00 [kdmflush]
root 980 2 0 Mar29 ? 00:00:00 [kdmflush]
root 1014 2 0 Mar29 ? 00:00:00 [kdmflush]
root 1015 2 0 Mar29 ? 00:00:01 [kcryptd_io]
root 1016 2 2 Mar29 ? 00:01:10 [kcryptd]
root 1025 2 0 Mar29 ? 00:00:00 [jbd2/dm-4-8]
root 1026 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 1027 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 1060 1 0 Mar29 ? 00:00:00 /sbin/udevd --daemon
root 1591 2 0 Mar29 ? 00:00:01 [flush-254:4]
root 1747 2 0 Mar29 ? 00:00:00 [kondemand/0]
root 1795 2 0 Mar29 ? 00:00:00 [kondemand/1]
root 1920 2 0 Mar29 ? 00:00:00 [kconservative/0]
root 1961 2 0 Mar29 ? 00:00:00 [kconservative/1]
root 2168 2 0 Mar29 ? 00:00:00 [kpsmoused]
root 2563 2 0 Mar29 ? 00:00:00 [ksuspend_usbd]
root 2591 2 0 Mar29 ? 00:00:00 [khubd]
root 2961 2 0 Mar29 ? 00:00:00 [i915/0]
root 2962 2 0 Mar29 ? 00:00:00 [i915/1]
root 2974 2 0 Mar29 ? 00:00:00 [pccardd]
root 2996 2 0 Mar29 ? 00:00:00 [iwl3945]
root 3004 2 0 Mar29 ? 00:00:01 [phy0]
root 3073 2 0 Mar29 ? 00:00:00 [usbhid_resumer]
root 3336 2 0 Mar29 ? 00:00:00 [hd-audio0]
root 4143 2 0 Mar29 ? 00:00:00 [kdmflush]
root 4144 2 0 Mar29 ? 00:00:00 [kcryptd_io]
root 4145 2 0 Mar29 ? 00:00:00 [kcryptd]
root 4170 2 0 Mar29 ? 00:00:00 [jbd2/dm-2-8]
root 4171 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4172 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4173 2 0 Mar29 ? 00:00:00 [jbd2/dm-3-8]
root 4174 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4175 2 0 Mar29 ? 00:00:00 [ext4-dio-unwrit]
root 4180 1 0 Mar29 ? 00:00:00 /sbin/mount.ntfs-3g /dev/sda1 /mnt/win -o rw,noexec,nosuid,nodev,users,uid=1001,gid=100,fmask=0113,dmask=000
root 4448 1 0 Mar29 ? 00:00:00 supervising syslog-ng
root 4449 4448 0 Mar29 ? 00:00:00 /usr/sbin/syslog-ng
root 4458 1 0 Mar29 ? 00:00:00 /usr/sbin/acpid
dbus 4472 1 1 Mar29 ? 00:00:27 /usr/bin/dbus-daemon --system
hal 4475 1 0 Mar29 ? 00:00:04 /usr/sbin/hald
root 4476 4475 0 Mar29 ? 00:00:00 hald-runner
root 4504 4476 0 Mar29 ? 00:00:00 hald-addon-input: Listening on /dev/input/event4 /dev/input/event3 /dev/input/event9 /dev/input/event8 /dev/
root 4508 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-rfkill-killswitch
root 4520 4476 0 Mar29 ? 00:00:03 hald-addon-storage: polling /dev/sr0 (every 2 sec)
root 4521 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-cpufreq
hal 4522 4476 0 Mar29 ? 00:00:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket
root 4851 1 0 Mar29 ? 00:00:00 /usr/sbin/crond -S -l info
root 4863 1 1 Mar29 ? 00:00:37 /usr/bin/python -O /usr/share/wicd/daemon/wicd-daemon.py
ntp 4877 1 0 Mar29 ? 00:00:00 /usr/sbin/ntpd -s
root 4894 4863 0 Mar29 ? 00:00:25 /usr/bin/python -O /usr/share/wicd/daemon/monitor.py
mpd 4908 1 0 Mar29 ? 00:00:00 /usr/bin/mpd /etc/mpd.conf
root 4916 1 0 Mar29 ? 00:00:00 truecrypt -t -k /etc/dropboxkey --protect-hidden=no --password= --fs-options=umask=0002,uid=dropbox,gid=drop
root 4918 1 0 Mar29 ? 00:00:00 truecrypt -t -k /etc/dropboxkey --protect-hidden=no --password= --fs-options=umask=0002,uid=dropbox,gid=drop
root 4925 2 0 Mar29 ? 00:00:00 [loop0]
root 4928 2 0 Mar29 ? 00:00:00 [kdmflush]
root 4929 2 0 Mar29 ? 00:00:00 [kcryptd_io]
root 4930 2 0 Mar29 ? 00:00:00 [kcryptd]
root 4947 1 0 Mar29 tty1 00:00:00 /sbin/agetty 38400 tty1 linux
root 4948 1 0 Mar29 tty2 00:00:00 /sbin/agetty 38400 tty2 linux
root 4949 1 0 Mar29 tty3 00:00:00 /sbin/agetty 38400 tty3 linux
root 4950 1 0 Mar29 tty6 00:00:00 /bin/login -f
zed 4951 4950 0 Mar29 tty6 00:00:00 -bash
zed 4993 4951 0 Mar29 tty6 00:00:00 /bin/sh /usr/bin/startx
zed 5010 4993 0 Mar29 tty6 00:00:00 xinit /home/zed/.xinitrc -- /etc/X11/xinit/xserverrc :0 -auth /tmp/serverauth.LXTS3D7lp0
root 5011 5010 10 Mar29 tty4 00:04:27 /usr/bin/X -nolisten tcp
zed 5020 5010 0 Mar29 tty6 00:00:00 ck-launch-session openbox-session
root 5022 1 0 Mar29 ? 00:00:00 /usr/sbin/console-kit-daemon --no-daemon
zed 5095 5020 0 Mar29 tty6 00:00:03 /usr/bin/openbox
zed 5099 5095 0 Mar29 tty6 00:00:00 gnome-session
root 5106 1 0 Mar29 ? 00:00:00 /usr/sbin/ntpd -s
zed 5109 1 0 Mar29 ? 00:00:00 /usr/bin/ssh-agent
zed 5113 1 0 Mar29 tty6 00:00:00 dbus-launch --exit-with-session gnome-session
zed 5114 1 0 Mar29 ? 00:00:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
root 5118 1 0 Mar29 ? 00:00:00 /usr/lib/DeviceKit/devkit-power-daemon
zed 5122 1 0 Mar29 ? 00:00:00 /usr/lib/GConf/gconfd-2
zed 5140 1 0 Mar29 tty6 00:00:00 gnome-keyring-daemon --start
zed 5142 5099 0 Mar29 tty6 00:00:06 gnome-panel
zed 5152 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfsd
zed 5157 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/zed/.gvfs
zed 5161 5099 0 Mar29 tty6 00:00:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon
zed 5162 5099 0 Mar29 tty6 00:00:08 /usr/bin/python -O /usr/share/wicd/gtk/wicd-client.py
zed 5163 5099 0 Mar29 tty6 00:00:00 /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
zed 5165 1 0 Mar29 ? 00:00:00 /usr/lib/bonobo/bonobo-activation-server --ac-activate --ior-output-fd=18
root 5167 1 0 Mar29 ? 00:00:00 /usr/lib/polkit-1/polkitd
root 5170 1 0 Mar29 ? 00:00:00 /usr/lib/DeviceKit/devkit-disks-daemon
root 5171 5170 0 Mar29 ? 00:00:02 devkit-disks-daemon: polling /dev/sr0
zed 5188 1 0 Mar29 ? 00:00:01 /usr/lib/gnome-applets/mixer_applet2 --oaf-activate-iid=OAFIID:GNOME_MixerApplet_Factory --oaf-ior-fd=18
zed 5190 1 0 Mar29 ? 00:00:00 /usr/lib/gnome-panel/notification-area-applet --oaf-activate-iid=OAFIID:GNOME_NotificationAreaApplet_Factory
zed 5192 1 0 Mar29 ? 00:00:00 /usr/lib/gnome-applets/battstat-applet-2 --oaf-activate-iid=OAFIID:GNOME_BattstatApplet_Factory --oaf-ior-fd
zed 5200 1 0 Mar29 ? 00:00:18 /usr/lib/gnome-panel/wnck-applet --oaf-activate-iid=OAFIID:GNOME_Wncklet_Factory --oaf-ior-fd=19
zed 5202 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor
zed 5208 1 0 Mar29 ? 00:00:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
zed 5215 1 0 Mar29 ? 00:00:03 python /usr/lib/hamster-applet/hamster-applet --oaf-activate-iid=OAFIID:Hamster_Applet_Factory --oaf-ior-fd=
zed 5218 1 0 Mar29 ? 00:00:01 /usr/lib/gnome-panel/clock-applet --oaf-activate-iid=OAFIID:GNOME_ClockApplet_Factory --oaf-ior-fd=32
zed 5236 1 0 Mar29 ? 00:00:00 /usr/lib/evolution-data-server-1.2/evolution-data-server-2.28 --oaf-activate-iid=OAFIID:GNOME_Evolution_Data
root 5257 4476 0 Mar29 ? 00:00:00 /usr/lib/hal/hald-addon-leds
root 5270 4863 0 Mar29 ? 00:00:00 [dhcpcd] <defunct>
root 5291 1 0 Mar29 ? 00:00:00 /sbin/dhcpcd eth0 -h tortuga
zed 5295 5095 0 Mar29 tty6 00:00:02 urxvt -fn -*-terminus-medium-*-*-*-16-*-*-*-*-*-iso8859-2 -e sudo su -
root 5297 5295 0 Mar29 pts/0 00:00:00 su -
root 5299 5297 0 Mar29 pts/0 00:00:06 -bash
zed 5364 5095 16 Mar29 tty6 00:07:00 /usr/lib/chromium/chromium
zed 5365 5364 0 Mar29 tty6 00:00:18 /usr/lib/chromium/chromium
zed 5366 5364 0 Mar29 tty6 00:00:00 /usr/lib/chromium/chromium --type=zygote
zed 5390 5366 0 Mar29 tty6 00:00:03 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5395 5366 0 Mar29 tty6 00:00:04 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5406 5366 0 Mar29 tty6 00:00:06 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5411 5366 0 Mar29 tty6 00:00:04 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=DnsImpact/_default_enabled_prefet
zed 5479 5366 7 Mar29 tty6 00:03:10 /usr/lib/chromium/chromium --type=renderer --lang=en-US --force-fieldtest=CacheSize/CacheSizeGroup_3/DnsImpa
dropbox 5492 1 0 Mar29 ? 00:00:10 /home/dropbox/.dropbox-dist/dropbox
zed 5543 1 0 Mar29 ? 00:00:00 kdeinit4: kdeinit4 Running...
zed 5545 5543 0 Mar29 ? 00:00:00 kdeinit4: klauncher [kdeinit] --fd=8
zed 5548 1 0 Mar29 ? 00:00:02 kdeinit4: kded4 [kdeinit]
zed 5562 5543 0 Mar29 ? 00:00:00 kdeinit4: kio_file [kdeinit] file local:/tmp
zed 5567 1 0 Mar29 ? 00:00:01 /usr/bin/knotify4
root 5572 1060 0 Mar29 ? 00:00:00 /sbin/udevd --daemon
zed 5717 1 0 Mar29 ? 00:00:00 /usr/lib/gamin/gam_server
zed 6126 5366 2 Mar29 tty6 00:00:28 /usr/lib/chromium/chromium --type=extension --lang=en-US --force-fieldtest=CacheSize/CacheSizeGroup_3/DnsImp
root 6459 1 0 Mar29 ? 00:00:00 /usr/lib/sa/sadc -F -L -S DISK 600 6 -
root 6518 1060 0 00:01 ? 00:00:00 /sbin/udevd --daemon
root 6804 2 0 00:10 ? 00:00:00 [flush-254:6]
root 6807 5299 0 00:10 pts/0 00:00:00 ps -Af
Edit: typo
Edit2: I found the source of slowness - removing vboxdrv module restores system performance. How to get VirtualBox working I will try to solve somewhere else.
Last edited by stabele (2010-03-30 20:40:52)sand_man wrote:X is running at 25% cpu on average
Your's and mine problems are probably not connected, I had low CPU utilization from all sources (including X), but system was dead slow anyway. -
[Solved] HP Omen 15 - Slow SSD after IRQ 16 error
[EDIT]
Sorry for wasting everyone's time. It turned out that I had only tried installing nvidia/bumblebee without the nomodeset option..and apparently that didn't work properly for some reason.
So if anyone else runs into this problem here's the solution:
1) Boot your installation media with the 'nomodeset' kernel option (this is especially important for live images (fedora,ubuntu,...) which are completely unusable otherwise
2) With nomodeset still enabled, install the nvidia driver, bumblebee and bbswitch
4) Enable bumblebeed.service
3) remove the nomodeset option
Also I updated the microcode on the CPU, but as far as I could tell that didn't affect anything.
[/EDIT]
Hi everyone,
I bought a new HP Omen 15 laptop. In Windows everything runs fine, but on Linux I get an IRQ 16 error after which SSD reads become so painfully slow that the system becomes mostly unusable. This issue has been posted by someone on the Ubuntu forums, but nobody had a solution there.
Hopefully one of you will be able to help me, because right now I'm stuck on Windows for doing my work...and I get absolutely no joy out of that
Hardware:
i7-4710HQ
Nvidia GeForce GTX 860 and Intel® HD Graphics 4600
512GB Samsung XP941 SSD (M.2)
Currently the system dual-boots with Windows 8.1, secure boot disabled, using gummiboot on the windows UEFI partition.
The actual error that (I think) leads to the performance hit is
[ 13.608625] 0000000000000000 96859b6ad089d33d ffff88045f243e28 ffffffff8154fb74
[ 13.608632] 0000000000000000 ffff880083514e00 ffff88045f243e58 ffffffff810cd406
[ 13.608637] 000000013ffeb056 ffff880083514e00 0000000000000000 0000000000000010
[ 13.608643] Call Trace:
[ 13.608646] <IRQ> [<ffffffff8154fb74>] dump_stack+0x4e/0x71
[ 13.608665] [<ffffffff810cd406>] __report_bad_irq+0x36/0xd0
[ 13.608671] [<ffffffff810cd7b7>] note_interrupt+0x257/0x2a0
[ 13.608677] [<ffffffff810cacee>] handle_irq_event_percpu+0xae/0x1f0
[ 13.608682] [<ffffffff810cae71>] handle_irq_event+0x41/0x70
[ 13.608689] [<ffffffff810cdd47>] handle_fasteoi_irq+0x87/0x140
[ 13.608698] [<ffffffff81017362>] handle_irq+0x22/0x40
[ 13.608704] [<ffffffff815581b1>] do_IRQ+0x51/0xf0
[ 13.608711] [<ffffffff815561ad>] common_interrupt+0x6d/0x6d
[ 13.608714] <EOI> [<ffffffff81403aa5>] ? cpuidle_enter_state+0x65/0x1a0
[ 13.608730] [<ffffffff81403a91>] ? cpuidle_enter_state+0x51/0x1a0
[ 13.608737] [<ffffffff81403cc7>] cpuidle_enter+0x17/0x20
[ 13.608745] [<ffffffff810b3539>] cpu_startup_entry+0x3d9/0x460
[ 13.608752] [<ffffffff8104a994>] start_secondary+0x1b4/0x1f0
[ 13.608756] handlers:
[ 13.608809] [<ffffffffa0128410>] ahci_single_irq_intr [libahci]
[ 13.608873] Disabling IRQ #16
What's interesting is, that this problem does not occur if I set the 'nomodeset' kernel option. So probably it's somehow related to graphics. The performance drop is quite visible:
With nomodeset:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 21006 MB in 2.00 seconds = 10513.48 MB/sec
Timing buffered disk reads: 2378 MB in 3.00 seconds = 792.36 MB/sec
...and without:
hdparm -Tt --verbose /dev/sda
/dev/sda:
Timing cached reads: 12274 MB in 2.00 seconds = 6140.85 MB/sec
Timing buffered disk reads: 8 MB in 3.20 seconds = 2.50 MB/sec
So just about 0.3% of the original speed.
The above information are form a fresh install without any additional packages installed. Installing nvidia/intel/bumblebee did not help either, so I've left it in the fresh state to be debuggable.
Here are various outputs from some commands that might be useful to determine the error source, let me know if you need anything else!
hdparm /dev/sda
/dev/sda:
multcount = 0 (off)
IO_support = 1 (32-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 62260/255/63, sectors = 1000215216, start = 0
lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1c.5 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 (rev d5)
00:1f.0 ISA bridge: Intel Corporation HM87 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 860M] (rev a2)
07:00.0 SATA controller: Samsung Electronics Co Ltd XP941 PCIe SSD (rev 01)
08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader (rev 01)
09:00.0 Network controller: Intel Corporation Wireless 7260 (rev c3)
cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7
0: 24 0 0 0 0 0 0 0 IR-IO-APIC-edge timer
1: 901 2 2 1 3 1 1 0 IR-IO-APIC-edge i8042
8: 1 0 0 0 0 0 0 0 IR-IO-APIC-edge rtc0
9: 199 49 37 75 13 25 6 18 IR-IO-APIC-fasteoi acpi
12: 4419 17 5 8 2 6 7 7 IR-IO-APIC-edge i8042
16: 3146 195401 312 395 353 184 102 108 IR-IO-APIC 16-fasteoi 0000:07:00.0
24: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar0
25: 0 0 0 0 0 0 0 0 DMAR_MSI-edge dmar1
26: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
27: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
28: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
29: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge PCIe PME
30: 6 1 2 9 1 0 1 2 IR-PCI-MSI-edge rtsx_pci
31: 574 190 28 34 154 29 11 7 IR-PCI-MSI-edge xhci_hcd
32: 0 0 0 0 0 0 0 0 IR-PCI-MSI-edge 0000:00:1f.2
33: 1 0 0 0 0 0 3 7 IR-PCI-MSI-edge mei_me
34: 5 138 79 0 5 76 10 0 IR-PCI-MSI-edge snd_hda_intel
35: 169 0 1 0 1 0 0 0 IR-PCI-MSI-edge i915
36: 17 3 2 7 6 14 2 11 IR-PCI-MSI-edge iwlwifi
37: 1 26 0 0 32 0 0 0 IR-PCI-MSI-edge snd_hda_intel
NMI: 0 0 0 0 0 0 0 0 Non-maskable interrupts
LOC: 958 2678 1069 355 1505 562 682 321 Local timer interrupts
SPU: 0 0 0 0 0 0 0 0 Spurious interrupts
PMI: 0 0 0 0 0 0 0 0 Performance monitoring interrupts
IWI: 1 1 0 1 0 0 0 0 IRQ work interrupts
RTR: 0 0 0 0 0 0 0 0 APIC ICR read retries
RES: 204 193 207 200 136 177 195 285 Rescheduling interrupts
CAL: 898 819 847 830 822 853 843 869 Function call interrupts
TLB: 10 6 8 3 4 7 3 5 TLB shootdowns
TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts
THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts
MCE: 0 0 0 0 0 0 0 0 Machine check exceptions
MCP: 2 2 2 2 2 2 2 2 Machine check polls
HYP: 0 0 0 0 0 0 0 0 Hypervisor callback interrupts
ERR: 0
MIS: 0
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.18.6-1-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Feb 7 08:44:05 CET 2015
[ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009c07efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x78e8e018-0x78ea7657] usable ==> usable
[ 0.000000] e820: update [mem 0x78e7d018-0x78e8d057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000078e7d017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e7d018-0x0000000078e8d057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8d058-0x0000000078e8e017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078e8e018-0x0000000078ea7657] usable
[ 0.000000] reserve setup_data: [mem 0x0000000078ea7658-0x000000009c07efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009c07f000-0x000000009ce7efff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009cfff000-0x000000009cffffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009d000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000045f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9cffe000 ACPI 2.0=0x9cffe014 SMBIOS=0x9ce7df18
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000007000) (0MB)
[ 0.000000] efi: mem02: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000007000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem05: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem06: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem07: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000001000000) (15MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000001000000-0x0000000001e3b000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000001e3b000-0x0000000078680000) (1896MB)
[ 0.000000] efi: mem10: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000078680000-0x00000000786a0000) (0MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000786a0000-0x0000000078e7d000) (7MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000078e7d000-0x0000000078ea8000) (0MB)
[ 0.000000] efi: mem13: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x0000000078ea8000-0x000000007ace3000) (30MB)
[ 0.000000] efi: mem14: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000007ace3000-0x000000007b670000) (9MB)
[ 0.000000] efi: mem15: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b670000-0x000000007b67a000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007b67a000-0x000000007b67f000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b67f000-0x000000007b865000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000007b865000-0x000000007b87f000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000007b87f000-0x000000007f7d2000) (63MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000007f7d2000-0x000000008001a000) (8MB)
[ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008001a000-0x0000000081106000) (16MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081106000-0x00000000815f5000) (4MB)
[ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000815f5000-0x000000008161b000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008161b000-0x0000000081659000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081659000-0x00000000819e1000) (3MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819e1000-0x00000000819e2000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000819e2000-0x00000000819fe000) (0MB)
[ 0.000000] efi: mem28: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000819fe000-0x0000000081a04000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a04000-0x0000000081a0c000) (0MB)
[ 0.000000] efi: mem30: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a0c000-0x0000000081a0d000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a0d000-0x0000000081a38000) (0MB)
[ 0.000000] efi: mem32: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081a38000-0x0000000081a3a000) (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081a3a000-0x0000000081b48000) (1MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081b48000-0x0000000081b49000) (0MB)
[ 0.000000] efi: mem35: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081b49000-0x0000000081bcc000) (0MB)
[ 0.000000] efi: mem36: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bcc000-0x0000000081bd4000) (0MB)
[ 0.000000] efi: mem37: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd4000-0x0000000081bd5000) (0MB)
[ 0.000000] efi: mem38: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd5000-0x0000000081bd7000) (0MB)
[ 0.000000] efi: mem39: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd7000-0x0000000081bd8000) (0MB)
[ 0.000000] efi: mem40: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081bd8000-0x0000000081bd9000) (0MB)
[ 0.000000] efi: mem41: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081bd9000-0x0000000081c1b000) (0MB)
[ 0.000000] efi: mem42: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c1b000-0x0000000081c1c000) (0MB)
[ 0.000000] efi: mem43: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c1c000-0x0000000081c20000) (0MB)
[ 0.000000] efi: mem44: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c20000-0x0000000081c22000) (0MB)
[ 0.000000] efi: mem45: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c22000-0x0000000081c2d000) (0MB)
[ 0.000000] efi: mem46: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c2d000-0x0000000081c30000) (0MB)
[ 0.000000] efi: mem47: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c30000-0x0000000081c52000) (0MB)
[ 0.000000] efi: mem48: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c52000-0x0000000081c53000) (0MB)
[ 0.000000] efi: mem49: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c53000-0x0000000081c76000) (0MB)
[ 0.000000] efi: mem50: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c76000-0x0000000081c77000) (0MB)
[ 0.000000] efi: mem51: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c77000-0x0000000081c78000) (0MB)
[ 0.000000] efi: mem52: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000081c78000-0x0000000081c7a000) (0MB)
[ 0.000000] efi: mem53: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000081c7a000-0x000000008387f000) (28MB)
[ 0.000000] efi: mem54: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008387f000-0x000000009bc0e000) (387MB)
[ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009bc0e000-0x000000009c07f000) (4MB)
[ 0.000000] efi: mem56: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c07f000-0x000000009c47f000) (4MB)
[ 0.000000] efi: mem57: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009c47f000-0x000000009c67f000) (2MB)
[ 0.000000] efi: mem58: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000009c67f000-0x000000009ce7f000) (8MB)
[ 0.000000] efi: mem59: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009ce7f000-0x000000009cf7f000) (1MB)
[ 0.000000] efi: mem60: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cf7f000-0x000000009cfff000) (0MB)
[ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009cfff000-0x000000009d000000) (0MB)
[ 0.000000] efi: mem62: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000045f600000) (13814MB)
[ 0.000000] efi: mem63: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem64: [Reserved | | | | | | | | | ] range=[0x000000009d000000-0x000000009fa00000) (42MB)
[ 0.000000] efi: mem65: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem66: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem67: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem68: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed1c000) (0MB)
[ 0.000000] efi: mem69: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem70: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed20000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem71: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Hewlett-Packard HP OMEN Notebook PC 15/2332, BIOS F.09 12/27/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 009D000000 mask 7FFF000000 uncachable
[ 0.000000] 2 base 009E000000 mask 7FFE000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] BRK [0x01b38000, 0x01b38fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45f400000-0x45f5fffff]
[ 0.000000] [mem 0x45f400000-0x45f5fffff] page 2M
[ 0.000000] BRK [0x01b39000, 0x01b39fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x45c000000-0x45f3fffff]
[ 0.000000] [mem 0x45c000000-0x45f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x45bffffff]
[ 0.000000] [mem 0x400000000-0x43fffffff] page 1G
[ 0.000000] [mem 0x440000000-0x45bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9c07efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9bffffff] page 2M
[ 0.000000] [mem 0x9c000000-0x9c07efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] [mem 0x9cfff000-0x9cffffff] page 4k
[ 0.000000] BRK [0x01b3a000, 0x01b3afff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x7f7d2000-0x80019fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009CFFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009CFFE210 0000F4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 0x000000009CFF7000 00010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 0x000000009CFDB000 018700 (v02 HPQOEM SLIC-MPC 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x000000009CF67000 000040
[ 0.000000] ACPI: TCPA 0x000000009CFFD000 000032 (v02 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: UEFI 0x000000009CFFC000 000236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 0x000000009CFFA000 000044 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 0x000000009CFF9000 000055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 0x000000009CFF8000 0000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 0x000000009CFF6000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 0x000000009CFF5000 00008C (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 0x000000009CFF4000 00003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 0x000000009CFDA000 000224 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD9000 0007F6 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x000000009CFD7000 000028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: LPIT 0x000000009CFD6000 000094 (v01 HPQOEM INSYDE 00000000 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFD5000 0003E1 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x000000009CFD4000 000034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 0x000000009CFD3000 000034 (v01 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCB000 000539 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFCA000 000AD8 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC6000 003361 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFBE000 003FC4 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC5000 00040A (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: WDTT 0x000000009CFC4000 000224 (v02 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 0x000000009CFC3000 00006B (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x000000009CFC2000 000038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: TPM2 0x000000009CFBD000 000044 (v03 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DMAR 0x000000009CFBC000 0000A8 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x45f5fa000-0x45f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00117fffff] PMD -> [ffff88044ec00000-ffff88045ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x45f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0006efff]
[ 0.000000] node 0: [mem 0x00070000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x9c07efff]
[ 0.000000] node 0: [mem 0x9cfff000-0x9cffffff]
[ 0.000000] node 0: [mem 0x100000000-0x45f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x45f5fffff]
[ 0.000000] On node 0 totalpages: 4175366
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9922 pages used for memmap
[ 0.000000] DMA32 zone: 635008 pages, LIFO batch:31
[ 0.000000] Normal zone: 55256 pages used for memmap
[ 0.000000] Normal zone: 3536384 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e7d000-0x78e7dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8d000-0x78e8dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78e8e000-0x78e8efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x78ea7000-0x78ea7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9c07f000-0x9ce7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88045f200000 s82880 r8192 d31808 u262144
[ 0.000000] pcpu-alloc: s82880 r8192 d31808 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4110103
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/mapper/VolGroup00-lv_root rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16285004K/16701464K available (5481K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 416460K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2494.211 MHz processor
[ 0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.27 BogoMIPS (lpj=8314036)
[ 0.000023] pid_max: default: 32768 minimum: 301
[ 0.000028] ACPI: Core revision 20140926
[ 0.014940] ACPI: All ACPI Tables successfully acquired
[ 0.048477] Security Framework initialized
[ 0.048484] Yama: becoming mindful.
[ 0.049168] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.051306] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.052245] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052257] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.052448] Initializing cgroup subsys memory
[ 0.052452] Initializing cgroup subsys devices
[ 0.052454] Initializing cgroup subsys freezer
[ 0.052455] Initializing cgroup subsys net_cls
[ 0.052457] Initializing cgroup subsys blkio
[ 0.052472] CPU: Physical Processor ID: 0
[ 0.052473] CPU: Processor Core ID: 0
[ 0.052476] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.053226] mce: CPU supports 9 MCE banks
[ 0.053236] CPU0: Thermal monitoring enabled (TM1)
[ 0.053246] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.053323] Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
[ 0.053911] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.055124] ftrace: allocating 20931 entries in 82 pages
[ 0.061596] dmar: Host address width 39
[ 0.061597] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.061601] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.061602] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.061605] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.061606] dmar: RMRR base: 0x0000009cd6f000 end: 0x0000009cd8efff
[ 0.061606] dmar: RMRR base: 0x0000009d800000 end: 0x0000009f9fffff
[ 0.061670] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.061671] HPET id 0 under DRHD base 0xfed91000
[ 0.061671] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.061783] Enabled IRQ remapping in x2apic mode
[ 0.061784] Enabling x2apic
[ 0.061784] Enabled x2apic
[ 0.061789] Switched APIC routing to cluster x2apic.
[ 0.062206] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.095245] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
[ 0.095250] TSC deadline timer enabled
[ 0.095266] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.095280] ... version: 3
[ 0.095281] ... bit width: 48
[ 0.095281] ... generic registers: 4
[ 0.095282] ... value mask: 0000ffffffffffff
[ 0.095283] ... max period: 0000ffffffffffff
[ 0.095283] ... fixed-purpose events: 3
[ 0.095284] ... event mask: 000000070000000f
[ 0.118723] x86: Booting SMP configuration:
[ 0.118724] .... node #0, CPUs: #1
[ 0.132727] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.139403] #2 #3 #4 #5 #6 #7
[ 0.253216] x86: Booted up 1 node, 8 CPUs
[ 0.253219] smpboot: Total of 8 processors activated (39923.18 BogoMIPS)
[ 0.259240] devtmpfs: initialized
[ 0.261225] PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
[ 0.261788] pinctrl core: initialized pinctrl subsystem
[ 0.261821] RTC time: 15:05:14, date: 03/07/15
[ 0.261896] NET: Registered protocol family 16
[ 0.272461] cpuidle: using governor ladder
[ 0.285819] cpuidle: using governor menu
[ 0.285860] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.285861] ACPI: bus type PCI registered
[ 0.285863] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.285923] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.285925] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.286198] PCI: Using configuration type 1 for base access
[ 0.299479] ACPI: Added _OSI(Module Device)
[ 0.299481] ACPI: Added _OSI(Processor Device)
[ 0.299482] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.299483] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.302912] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.305266] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.306241] ACPI: Dynamic OEM Table Load:
[ 0.306250] ACPI: SSDT 0xFFFF880448503800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20131115)
[ 0.319415] ACPI: Dynamic OEM Table Load:
[ 0.319425] ACPI: SSDT 0xFFFF8804485D2000 0005AA (v01 PmRef ApIst 00003000 INTL 20131115)
[ 0.332651] ACPI: Dynamic OEM Table Load:
[ 0.332660] ACPI: SSDT 0xFFFF88044858EE00 000119 (v01 PmRef ApCst 00003000 INTL 20131115)
[ 0.384073] ACPI: Interpreter enabled
[ 0.384081] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[ 0.384088] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[ 0.384107] ACPI: (supports S0 S3 S4 S5)
[ 0.384108] ACPI: Using IOAPIC for interrupt routing
[ 0.384130] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.388473] ACPI: Power Resource [PG00] (on)
[ 0.390539] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.390543] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.390880] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.391231] PCI host bridge to bus 0000:00
[ 0.391233] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.391234] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.391236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.391237] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.391238] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.391239] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.391240] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.391241] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.391242] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.391243] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.391244] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.391245] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.391246] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.391247] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.391248] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.391249] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff]
[ 0.391255] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.391363] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.391390] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.391467] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.391495] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.391503] pci 0000:00:02.0: reg 0x10: [mem 0xd1000000-0xd13fffff 64bit]
[ 0.391507] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.391511] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.391611] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.391617] pci 0000:00:03.0: reg 0x10: [mem 0xd1710000-0xd1713fff 64bit]
[ 0.391739] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.391754] pci 0000:00:14.0: reg 0x10: [mem 0xd1700000-0xd170ffff 64bit]
[ 0.391806] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.391878] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.391904] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.391922] pci 0000:00:16.0: reg 0x10: [mem 0xd1718000-0xd171800f 64bit]
[ 0.391977] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.392081] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.392094] pci 0000:00:1b.0: reg 0x10: [mem 0xd1714000-0xd1717fff 64bit]
[ 0.392153] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.392226] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.392251] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.392316] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.392392] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.392418] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.392477] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.392552] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.392576] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.392635] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.392713] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.392742] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 0.392924] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.392937] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.392943] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.392950] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.392956] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.392962] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.392968] pci 0000:00:1f.2: reg 0x24: [mem 0xd171b000-0xd171b7ff]
[ 0.393001] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.393092] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.393105] pci 0000:00:1f.3: reg 0x10: [mem 0xd1719000-0xd17190ff 64bit]
[ 0.393121] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.393269] pci 0000:01:00.0: [10de:1392] type 00 class 0x030200
[ 0.393285] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd0ffffff]
[ 0.393301] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.393317] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.393328] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.393338] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.393417] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.399365] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.399367] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.399370] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.399373] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.399511] pci 0000:07:00.0: [144d:a800] type 00 class 0x010601
[ 0.399581] pci 0000:07:00.0: reg 0x24: [mem 0xd1600000-0xd1601fff]
[ 0.399611] pci 0000:07:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.399698] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.399751] pci 0000:07:00.0: System wakeup disabled by ACPI
[ 0.406055] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.406061] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.406133] pci 0000:08:00.0: [10ec:5227] type 00 class 0xff0000
[ 0.406153] pci 0000:08:00.0: reg 0x10: [mem 0xd1500000-0xd1500fff]
[ 0.406285] pci 0000:08:00.0: supports D1 D2
[ 0.406286] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.406316] pci 0000:08:00.0: System wakeup disabled by ACPI
[ 0.412720] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.412725] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.412836] pci 0000:09:00.0: [8086:08b1] type 00 class 0x028000
[ 0.412890] pci 0000:09:00.0: reg 0x10: [mem 0xd1400000-0xd1401fff 64bit]
[ 0.413128] pci 0000:09:00.0: PME# supported from D0 D3hot D3cold
[ 0.413183] pci 0000:09:00.0: System wakeup disabled by ACPI
[ 0.419415] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.419420] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.419464] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.420118] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420195] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420233] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420269] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420305] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420341] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420377] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.420652] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.420689] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.420760] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.420762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.420764] vgaarb: loaded
[ 0.420765] vgaarb: bridge control possible 0000:00:02.0
[ 0.420853] PCI: Using ACPI for IRQ routing
[ 0.425911] PCI: pci_cache_line_size set to 64 bytes
[ 0.425949] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.425950] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.425951] e820: reserve RAM buffer [mem 0x78e7d018-0x7bffffff]
[ 0.425952] e820: reserve RAM buffer [mem 0x78e8e018-0x7bffffff]
[ 0.425953] e820: reserve RAM buffer [mem 0x9c07f000-0x9fffffff]
[ 0.425954] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
[ 0.425955] e820: reserve RAM buffer [mem 0x45f600000-0x45fffffff]
[ 0.426019] NetLabel: Initializing
[ 0.426020] NetLabel: domain hash size = 128
[ 0.426021] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.426028] NetLabel: unlabeled traffic allowed by default
[ 0.426041] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.426044] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.428075] Switched to clocksource hpet
[ 0.431534] pnp: PnP ACPI init
[ 0.431620] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.431622] system 00:00: [io 0xffff] has been reserved
[ 0.431623] system 00:00: [io 0xffff] has been reserved
[ 0.431624] system 00:00: [io 0xffff] has been reserved
[ 0.431625] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.431626] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.431628] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431656] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.431658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431677] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.431703] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.431705] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.431750] pnp 00:04: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 0.431766] pnp 00:05: Plug and Play ACPI device, IDs SYN1ed8 SYN1e00 SYN0002 PNP0f13 (active)
[ 0.431848] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.431849] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.431850] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.431852] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.431853] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.431854] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.431855] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.431856] system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.431857] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.431858] system 00:06: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 0.431860] system 00:06: [mem 0x9fa10000-0x9fa1ffff] has been reserved
[ 0.431861] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.432212] pnp: PnP ACPI: found 7 devices
[ 0.438072] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.438074] pci 0000:07:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.438102] pci 0000:01:00.0: BAR 6: assigned [mem 0xb2000000-0xb207ffff pref]
[ 0.438103] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[ 0.438105] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.438107] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd0ffffff]
[ 0.438109] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438112] pci 0000:07:00.0: BAR 6: assigned [mem 0xd1610000-0xd161ffff pref]
[ 0.438113] pci 0000:00:1c.0: PCI bridge to [bus 07]
[ 0.438117] pci 0000:00:1c.0: bridge window [mem 0xd1600000-0xd16fffff]
[ 0.438123] pci 0000:00:1c.4: PCI bridge to [bus 08]
[ 0.438127] pci 0000:00:1c.4: bridge window [mem 0xd1500000-0xd15fffff]
[ 0.438133] pci 0000:00:1c.5: PCI bridge to [bus 09]
[ 0.438137] pci 0000:00:1c.5: bridge window [mem 0xd1400000-0xd14fffff]
[ 0.438143] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.438144] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.438145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.438146] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.438147] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.438148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.438149] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.438150] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.438151] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.438152] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.438153] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.438154] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.438155] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.438156] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.438157] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.438158] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.438159] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff]
[ 0.438160] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.438161] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd0ffffff]
[ 0.438161] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff 64bit pref]
[ 0.438163] pci_bus 0000:07: resource 1 [mem 0xd1600000-0xd16fffff]
[ 0.438164] pci_bus 0000:08: resource 1 [mem 0xd1500000-0xd15fffff]
[ 0.438165] pci_bus 0000:09: resource 1 [mem 0xd1400000-0xd14fffff]
[ 0.438182] NET: Registered protocol family 2
[ 0.438329] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.438470] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.438574] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.438585] TCP: reno registered
[ 0.438597] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.438690] NET: Registered protocol family 1
[ 0.438701] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.440063] PCI: CLS 64 bytes, default 64
[ 0.440092] Unpacking initramfs...
[ 0.535471] Freeing initrd memory: 8480K (ffff88007f7d2000 - ffff88008001a000)
[ 0.535494] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.535496] software IO TLB [mem 0x97c0e000-0x9bc0e000] (64MB) mapped at [ffff880097c0e000-ffff88009bc0dfff]
[ 0.535525] Simple Boot Flag at 0x44 set to 0x1
[ 0.535703] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.535742] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535747] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535753] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535759] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535764] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535770] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535775] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535781] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.535821] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.535836] Scanning for low memory corruption every 60 seconds
[ 0.536021] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.536041] Initialise system trusted keyring
[ 0.536249] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.537029] zpool: loaded
[ 0.537031] zbud: loaded
[ 0.537161] VFS: Disk quotas dquot_6.5.2
[ 0.537181] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.537256] msgmni has been set to 31953
[ 0.537287] Key type big_key registered
[ 0.537431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.537471] io scheduler noop registered
[ 0.537473] io scheduler deadline registered
[ 0.537490] io scheduler cfq registered (default)
[ 0.537616] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.537711] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 0.537809] pcieport 0000:00:1c.4: irq 28 for MSI/MSI-X
[ 0.537906] pcieport 0000:00:1c.5: irq 29 for MSI/MSI-X
[ 0.537967] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.537968] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.537970] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.537981] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.537982] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 0.537986] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.537996] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 0.537997] pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
[ 0.538000] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 0.538010] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 0.538011] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 0.538014] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 0.538023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.538035] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.538055] efifb: probing for efifb
[ 0.538070] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90011c00000, using 8100k, total 8100k
[ 0.538071] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.538071] efifb: scrolling: redraw
[ 0.538072] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.541482] Console: switching to colour frame buffer device 240x67
[ 0.544794] fb0: EFI VGA frame buffer device
[ 0.544800] intel_idle: MWAIT substates: 0x42120
[ 0.544801] intel_idle: v0.4 model 0x3C
[ 0.544801] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.545023] GHES: HEST is not enabled!
[ 0.545063] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.545351] Linux agpgart interface v0.103
[ 0.545389] rtc_cmos 00:02: RTC can wake from S4
[ 0.545490] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.545516] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.545524] Intel P-state driver initializing.
[ 0.545680] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.545994] TCP: cubic registered
[ 0.546216] NET: Registered protocol family 10
[ 0.546732] NET: Registered protocol family 17
[ 0.547560] Loading compiled-in X.509 certificates
[ 0.547591] registered taskstats version 1
[ 0.548780] Magic number: 7:609:82
[ 0.548952] rtc_cmos 00:02: setting system clock to 2015-03-07 15:05:15 UTC (1425740715)
[ 0.549136] PM: Hibernation image not present or could not be loaded.
[ 0.551123] Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
[ 0.551126] Write protecting the kernel read-only data: 8192k
[ 0.555482] Freeing unused kernel memory: 652K (ffff88000155d000 - ffff880001600000)
[ 0.557272] Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
[ 0.570421] random: systemd-tmpfile urandom read with 5 bits of entropy available
[ 0.584356] device-mapper: uevent: version 1.0.3
[ 0.584470] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected]
[ 0.597541] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.602695] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.602710] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.603099] rtsx_pci 0000:08:00.0: irq 30 for MSI/MSI-X
[ 0.603111] rtsx_pci 0000:08:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 30
[ 0.604239] ACPI: bus type USB registered
[ 0.604267] usbcore: registered new interface driver usbfs
[ 0.604273] SCSI subsystem initialized
[ 0.604279] usbcore: registered new interface driver hub
[ 0.604330] usbcore: registered new device driver usb
[ 0.605601] libata version 3.00 loaded.
[ 0.605678] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.605685] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.605779] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.605808] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
[ 0.606024] hub 1-0:1.0: USB hub found
[ 0.606063] hub 1-0:1.0: 14 ports detected
[ 0.609623] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.609626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.609780] hub 2-0:1.0: USB hub found
[ 0.609795] hub 2-0:1.0: 6 ports detected
[ 0.610944] ahci 0000:00:1f.2: version 3.0
[ 0.611066] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.611083] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.611102] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.611105] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 0.611516] scsi host0: ahci
[ 0.611639] scsi host1: ahci
[ 0.611727] scsi host2: ahci
[ 0.611822] scsi host3: ahci
[ 0.611861] ata1: SATA max UDMA/133 abar m2048@0xd171b000 port 0xd171b100 irq 32
[ 0.611863] ata2: DUMMY
[ 0.611864] ata3: DUMMY
[ 0.611865] ata4: DUMMY
[ 0.621966] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.624998] ahci 0000:07:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.625001] ahci 0000:07:00.0: flags: 64bit ncq led clo only pio ccc
[ 0.625238] scsi host4: ahci
[ 0.625288] ata5: SATA max UDMA/133 abar m8192@0xd1600000 port 0xd1600100 irq 16
[ 0.808604] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808642] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808673] usb usb2-port2: couldn't allocate usb_device
[ 0.808738] xhci_hcd 0000:00:14.0: Error while assigning device slot ID
[ 0.808768] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32.
[ 0.808798] usb usb2-port6: couldn't allocate usb_device
[ 0.932036] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.952070] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.952367] ata5.00: ATA-9: SAMSUNG MZHPU512HCGL-000H1, UXM62H1Q, max UDMA/133
[ 0.952370] ata5.00: 1000215216 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.952660] ata5.00: configured for UDMA/133
[ 0.952785] scsi 4:0:0:0: Direct-Access ATA SAMSUNG MZHPU512 2H1Q PQ: 0 ANSI: 5
[ 0.955003] sd 4:0:0:0: [sda] 1000215216 512-byte logical blocks: (512 GB/476 GiB)
[ 0.955028] sd 4:0:0:0: [sda] Write Protect is off
[ 0.955030] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.955038] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.956407] sda: sda1 sda2 sda3 sda4 sda5
[ 0.956825] sd 4:0:0:0: [sda] Attached SCSI disk
[ 0.968695] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[ 1.302451] usb 1-4: new high-speed USB device number 3 using xhci_hcd
[ 1.539371] tsc: Refined TSC clocksource calibration: 2494.224 MHz
[ 1.646163] usb 1-13: new full-speed USB device number 4 using xhci_hcd
[ 1.718430] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.821454] usb 1-13: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.972758] systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 1.972914] systemd[1]: Detected architecture 'x86-64'.
[ 1.973342] systemd[1]: Set hostname to <hp_arch>.
[ 2.046Sorry should have mentioned that. Yeah I tried that and it delays the error message a little bit (about 20 seconds after boot vs instantly). In the end it leads to the exact same error though.
-
Realtek ethernet initialization slow [SOLVED]
Hello!
I am having problems with my ethernet controller (Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller) taking 40-60 seconds to get a network connection.
I am using netcfg 2.6.8-1 and have enabled net-auto-wired in my DAEMONS array:
DAEMONS=(syslog-ng crond dbus net-auto-wired net-auto-wireless !ntpd cupsd netfs mpd)
Here is my netcfg profile:
CONNECTION='ethernet'
DESCRIPTION='Ethernet connection at home'
INTERFACE='eth0'
IP='dhcp'
## for DHCPv6
#IP6='dhcp'
## for IPv6 autoconfiguration
#IP6='stateless
This is the output from lspci:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8600M GS] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
09:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
09:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
09:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
09:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
This is the output from dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
[ 0.000000] Command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfed0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv9700 Notebook PC /30CB, BIOS F.59 11/25/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbfed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D7FFF write-protect
[ 0.000000] D8000-DBFFF uncachable
[ 0.000000] DC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f8520] f8520
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfed0000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfed0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfed0000 @ bfecb000-bfed0000
[ 0.000000] RAMDISK: 37dca000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f8480 00024 (v02 HP )
[ 0.000000] ACPI: XSDT 00000000bfed5bdd 0007C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bfedfc6c 000F4 (v03 HP 30CC 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bfed703c 08BBC (v01 HP 30CB 06040000 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000bfee2fc0 00040
[ 0.000000] ACPI: HPET 00000000bfedfd60 00038 (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bfedfd98 0003C (v01 HP 30CB 06040000 LOHR 0000005A)
[ 0.000000] ACPI: TMOR 00000000bfedfdd4 00026 (v01 HP 30CC 06040000 PTL 00000003)
[ 0.000000] ACPI: APIC 00000000bfedfdfa 00068 (v01 HP 30CB 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bfedfe62 00028 (v01 HP 30CB 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bfedfe8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bfed6d5f 002DD (v01 HP 30CB 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed61e5 0025F (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed613f 000A6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000bfed5c59 004E6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bfed0000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bfed0000
[ 0.000000] NODE_DATA [00000000bfec6000 - 00000000bfecafff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfed0
[ 0.000000] On node 0 totalpages: 786015
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10692 pages used for memmap
[ 0.000000] DMA32 zone: 771340 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff8800bfc00000 s78464 r8192 d23936 u1048576
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775262
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=UUID=1ca8888a-877c-4b74-b3ce-18de2ca02022 ro 5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3088932k/3144512k available (4066k kernel code, 452k absent, 55128k reserved, 3302k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.793 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3659.98 BogoMIPS (lpj=6095976)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003483] Security Framework initialized
[ 0.003491] AppArmor: AppArmor disabled by boot time parameter
[ 0.006723] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009911] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011485] Mount-cache hash table entries: 256
[ 0.012020] Initializing cgroup subsys cpuacct
[ 0.012063] Initializing cgroup subsys memory
[ 0.012087] Initializing cgroup subsys devices
[ 0.012090] Initializing cgroup subsys freezer
[ 0.012092] Initializing cgroup subsys net_cls
[ 0.012095] Initializing cgroup subsys blkio
[ 0.012163] CPU: Physical Processor ID: 0
[ 0.012165] CPU: Processor Core ID: 0
[ 0.012168] mce: CPU supports 6 MCE banks
[ 0.012178] CPU0: Thermal monitoring enabled (TM2)
[ 0.012185] using mwait in idle threads.
[ 0.013589] ACPI: Core revision 20110413
[ 0.020015] ftrace: allocating 16144 entries in 64 pages
[ 0.023754] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059353] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.059996] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.059996] PEBS disabled due to CPU errata.
[ 0.059996] ... version: 2
[ 0.059996] ... bit width: 40
[ 0.059996] ... generic registers: 2
[ 0.059996] ... value mask: 000000ffffffffff
[ 0.059996] ... max period: 000000007fffffff
[ 0.059996] ... fixed-purpose events: 3
[ 0.059996] ... event mask: 0000000700000003
[ 0.076788] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.103342] Booting Node 0, Processors #1 Ok.
[ 0.103346] smpboot cpu 1: start_ip = 9a000
[ 0.200020] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.206659] Brought up 2 CPUs
[ 0.206662] Total of 2 processors activated (7318.31 BogoMIPS).
[ 0.207867] devtmpfs: initialized
[ 0.208097] PM: Registering ACPI NVS region at bfed0000 (77824 bytes)
[ 0.210342] print_constraints: dummy:
[ 0.210439] NET: Registered protocol family 16
[ 0.210574] ACPI: bus type pci registered
[ 0.210759] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.210763] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.251674] PCI: Using configuration type 1 for base access
[ 0.252194] bio: create slab <bio-0> at 0
[ 0.254077] ACPI: EC: Look up EC in DSDT
[ 0.254256] ACPI Error: [CDW1] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
[ 0.254264] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff8800bae32a78), AE_NOT_FOUND (20110413/psparse-536)
[ 0.256623] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.257710] ACPI: SSDT 00000000bfed6aa1 001F6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.258077] ACPI: Dynamic OEM Table Load:
[ 0.258081] ACPI: SSDT (null) 001F6 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.258208] ACPI: SSDT 00000000bfed6444 005D8 (v01 HP 30CB 00003001 INTL 20061109)
[ 0.258557] ACPI: Dynamic OEM Table Load:
[ 0.258561] ACPI: SSDT (null) 005D8 (v01 HP 30CB 00003001 INTL 20061109)
[ 0.258784] ACPI: SSDT 00000000bfed6c97 000C8 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259142] ACPI: Dynamic OEM Table Load:
[ 0.259146] ACPI: SSDT (null) 000C8 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259233] ACPI: SSDT 00000000bfed6a1c 00085 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259584] ACPI: Dynamic OEM Table Load:
[ 0.259587] ACPI: SSDT (null) 00085 (v01 HP 30CB 00003000 INTL 20061109)
[ 0.259886] ACPI: Interpreter enabled
[ 0.259890] ACPI: (supports S0 S3 S4 S5)
[ 0.259911] ACPI: Using IOAPIC for interrupt routing
[ 0.267408] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.267597] ACPI: No dock devices found.
[ 0.267599] HEST: Table not found.
[ 0.267603] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.267938] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.268586] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.268590] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.268593] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.268597] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.268600] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.268603] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.268606] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff]
[ 0.268609] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff]
[ 0.268629] pci 0000:00:00.0: [8086:2a00] type 0 class 0x000600
[ 0.268683] pci 0000:00:01.0: [8086:2a01] type 1 class 0x000604
[ 0.268726] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.268730] pci 0000:00:01.0: PME# disabled
[ 0.268789] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.268853] pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
[ 0.268899] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.268964] pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
[ 0.269028] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.269055] pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
[ 0.269154] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.269161] pci 0000:00:1a.7: PME# disabled
[ 0.269192] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.269218] pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
[ 0.269311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.269317] pci 0000:00:1b.0: PME# disabled
[ 0.269348] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.269445] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.269450] pci 0000:00:1c.0: PME# disabled
[ 0.269484] pci 0000:00:1c.1: [8086:2841] type 1 class 0x000604
[ 0.269580] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.269585] pci 0000:00:1c.1: PME# disabled
[ 0.269624] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
[ 0.269720] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.269726] pci 0000:00:1c.5: PME# disabled
[ 0.269759] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.269822] pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
[ 0.269867] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.269931] pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
[ 0.270004] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.270068] pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
[ 0.270130] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.270157] pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
[ 0.270257] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.270263] pci 0000:00:1d.7: PME# disabled
[ 0.270290] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.270386] pci 0000:00:1f.0: [8086:2815] type 0 class 0x000601
[ 0.270498] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.270505] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.270514] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0380 (mask 0007)
[ 0.270559] pci 0000:00:1f.1: [8086:2850] type 0 class 0x000101
[ 0.270578] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.270591] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.270605] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.270618] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.270632] pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
[ 0.270689] pci 0000:00:1f.2: [8086:2829] type 0 class 0x000106
[ 0.270719] pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
[ 0.270732] pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
[ 0.270746] pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
[ 0.270760] pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
[ 0.270773] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.270787] pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
[ 0.270841] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.270847] pci 0000:00:1f.2: PME# disabled
[ 0.270870] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.270889] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.270936] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.271034] pci 0000:01:00.0: [10de:0425] type 0 class 0x000300
[ 0.271055] pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
[ 0.271078] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271102] pci 0000:01:00.0: reg 1c: [mem 0xcc000000-0xcdffffff 64bit]
[ 0.271118] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
[ 0.271134] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.271221] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.271225] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.271229] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.271234] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271401] pci 0000:02:00.0: [8086:4222] type 0 class 0x000280
[ 0.271458] pci 0000:02:00.0: reg 10: [mem 0xf4000000-0xf4000fff]
[ 0.271795] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.271808] pci 0000:02:00.0: PME# disabled
[ 0.271878] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.271917] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.271922] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
[ 0.271928] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.271938] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.272006] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
[ 0.272012] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
[ 0.272018] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.272027] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.272128] pci 0000:08:00.0: [10ec:8168] type 0 class 0x000200
[ 0.272154] pci 0000:08:00.0: reg 10: [io 0xc000-0xc0ff]
[ 0.272198] pci 0000:08:00.0: reg 18: [mem 0xf8000000-0xf8000fff 64bit]
[ 0.272250] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.272315] pci 0000:08:00.0: supports D1 D2
[ 0.272318] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.272325] pci 0000:08:00.0: PME# disabled
[ 0.272354] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.272367] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[ 0.272373] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.272379] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.272388] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.272454] pci 0000:09:09.0: [1180:0832] type 0 class 0x000c00
[ 0.272472] pci 0000:09:09.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.272474] pci 0000:09:09.0: MMC cards are now supported by standard SDHCI controller
[ 0.272492] pci 0000:09:09.0: reg 10: [mem 0xf8100000-0xf81007ff]
[ 0.272587] pci 0000:09:09.0: supports D1 D2
[ 0.272589] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272595] pci 0000:09:09.0: PME# disabled
[ 0.272619] pci 0000:09:09.1: [1180:0822] type 0 class 0x000805
[ 0.272642] pci 0000:09:09.1: reg 10: [mem 0xf8100800-0xf81008ff]
[ 0.272735] pci 0000:09:09.1: supports D1 D2
[ 0.272737] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272744] pci 0000:09:09.1: PME# disabled
[ 0.272767] pci 0000:09:09.2: [1180:0592] type 0 class 0x000880
[ 0.272791] pci 0000:09:09.2: reg 10: [mem 0xf8101000-0xf81010ff]
[ 0.272884] pci 0000:09:09.2: supports D1 D2
[ 0.272886] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.272892] pci 0000:09:09.2: PME# disabled
[ 0.272915] pci 0000:09:09.3: [1180:0852] type 0 class 0x000880
[ 0.272938] pci 0000:09:09.3: reg 10: [mem 0xf8101400-0xf81014ff]
[ 0.273031] pci 0000:09:09.3: supports D1 D2
[ 0.273033] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.273039] pci 0000:09:09.3: PME# disabled
[ 0.273095] pci 0000:00:1e.0: PCI bridge to [bus 09-09] (subtractive decode)
[ 0.273101] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.273107] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.273116] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.273120] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.273123] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.273126] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.273129] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.273132] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.273135] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.273139] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.273142] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.273177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.273305] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.273370] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.273416] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.273457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.273521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.273569] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.273573] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.273575] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.278401] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.278457] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.278510] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.278561] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.278613] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.278665] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.278715] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.278767] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.278887] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.278894] vgaarb: loaded
[ 0.278896] vgaarb: bridge control possible 0000:01:00.0
[ 0.279005] PCI: Using ACPI for IRQ routing
[ 0.291398] PCI: pci_cache_line_size set to 64 bytes
[ 0.291537] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.291540] reserve RAM buffer: 00000000bfed0000 - 00000000bfffffff
[ 0.291700] NetLabel: Initializing
[ 0.291703] NetLabel: domain hash size = 128
[ 0.291705] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.291722] NetLabel: unlabeled traffic allowed by default
[ 0.291738] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.291744] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.291750] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.303337] Switching to clocksource hpet
[ 0.306534] Switched to NOHz mode on CPU #0
[ 0.306616] Switched to NOHz mode on CPU #1
[ 0.311449] pnp: PnP ACPI init
[ 0.311470] ACPI: bus type pnp registered
[ 0.312253] pnp 00:00: [bus 00-ff]
[ 0.312257] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.312259] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.312262] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.312265] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.312267] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.312270] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.312272] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.312275] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.312277] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.312280] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.312282] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.312285] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.312287] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.312290] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.312292] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.312295] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.312298] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.312300] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.312303] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.312306] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.312393] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.312475] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.312478] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.312481] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.312483] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.312485] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.312492] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.312494] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 0.312497] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.312583] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.312587] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.312590] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.312594] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.312597] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.312600] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.312603] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.312607] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.312611] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312836] pnp 00:02: [io 0x0000-0x001f]
[ 0.312838] pnp 00:02: [io 0x0081-0x0091]
[ 0.312841] pnp 00:02: [io 0x0093-0x009f]
[ 0.312843] pnp 00:02: [io 0x00c0-0x00df]
[ 0.312845] pnp 00:02: [dma 4]
[ 0.312895] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.312909] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.312961] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.313035] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.313108] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.313112] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.313126] pnp 00:05: [io 0x00f0]
[ 0.313138] pnp 00:05: [irq 13]
[ 0.313188] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.313201] pnp 00:06: [io 0x002e-0x002f]
[ 0.313203] pnp 00:06: [io 0x004e-0x004f]
[ 0.313205] pnp 00:06: [io 0x0061]
[ 0.313208] pnp 00:06: [io 0x0063]
[ 0.313210] pnp 00:06: [io 0x0065]
[ 0.313212] pnp 00:06: [io 0x0067]
[ 0.313214] pnp 00:06: [io 0x0080]
[ 0.313216] pnp 00:06: [io 0x0092]
[ 0.313218] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.313220] pnp 00:06: [io 0x0380-0x0383]
[ 0.313222] pnp 00:06: [io 0x0680-0x069f]
[ 0.313224] pnp 00:06: [io 0x0800-0x080f]
[ 0.313226] pnp 00:06: [io 0x1000-0x107f]
[ 0.313229] pnp 00:06: [io 0x1180-0x11bf]
[ 0.313231] pnp 00:06: [io 0x1640-0x164f]
[ 0.313233] pnp 00:06: [io 0xfe00]
[ 0.313323] system 00:06: [io 0x0380-0x0383] has been reserved
[ 0.313327] system 00:06: [io 0x0680-0x069f] has been reserved
[ 0.313330] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.313348] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.313351] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.313354] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.313357] system 00:06: [io 0xfe00] has been reserved
[ 0.313361] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313386] pnp 00:07: [io 0x06a0-0x06af]
[ 0.313389] pnp 00:07: [io 0x06b0-0x06ff]
[ 0.313460] system 00:07: [io 0x06a0-0x06af] has been reserved
[ 0.313464] system 00:07: [io 0x06b0-0x06ff] has been reserved
[ 0.313467] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313478] pnp 00:08: [io 0x0070-0x0077]
[ 0.313485] pnp 00:08: [irq 8]
[ 0.313539] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.313607] pnp 00:09: [io 0x0060]
[ 0.313609] pnp 00:09: [io 0x0064]
[ 0.313615] pnp 00:09: [irq 1]
[ 0.313673] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.313688] pnp 00:0a: [irq 12]
[ 0.313750] pnp 00:0a: Plug and Play ACPI device, IDs SYN0138 SYN0100 SYN0002 PNP0f13 (active)
[ 0.313774] pnp: PnP ACPI: found 11 devices
[ 0.313776] ACPI: ACPI bus type pnp unregistered
[ 0.320373] PCI: max bus depth: 1 pci_try_num: 2
[ 0.320432] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc00fffff pref]
[ 0.320436] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0100000-0xc01000ff]
[ 0.320444] pci 0000:00:1f.3: BAR 0: set to [mem 0xc0100000-0xc01000ff] (PCI address [0xc0100000-0xc01000ff])
[ 0.320450] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.320453] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.320456] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.320461] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xceffffff]
[ 0.320466] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.320472] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.320476] pci 0000:00:1c.0: bridge window [io 0x4000-0x7fff]
[ 0.320483] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.320489] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.320498] pci 0000:00:1c.1: PCI bridge to [bus 04-07]
[ 0.320502] pci 0000:00:1c.1: bridge window [io 0x8000-0xbfff]
[ 0.320510] pci 0000:00:1c.1: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.320516] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.320526] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
[ 0.320529] pci 0000:00:1c.5: PCI bridge to [bus 08-08]
[ 0.320533] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.320540] pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
[ 0.320546] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc00fffff pref]
[ 0.320556] pci 0000:00:1e.0: PCI bridge to [bus 09-09]
[ 0.320558] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.320565] pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
[ 0.320571] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.320591] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.320596] pci 0000:00:01.0: setting latency timer to 64
[ 0.320607] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.320613] pci 0000:00:1c.0: setting latency timer to 64
[ 0.320621] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.320627] pci 0000:00:1c.1: setting latency timer to 64
[ 0.320635] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.320641] pci 0000:00:1c.5: setting latency timer to 64
[ 0.320650] pci 0000:00:1e.0: setting latency timer to 64
[ 0.320655] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.320658] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.320660] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.320663] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.320666] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.320669] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.320672] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.320674] pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.320677] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.320680] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xceffffff]
[ 0.320683] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.320686] pci_bus 0000:02: resource 0 [io 0x4000-0x7fff]
[ 0.320689] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.320692] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.320695] pci_bus 0000:04: resource 0 [io 0x8000-0xbfff]
[ 0.320697] pci_bus 0000:04: resource 1 [mem 0xf6000000-0xf7ffffff]
[ 0.320700] pci_bus 0000:04: resource 2 [mem 0xf2000000-0xf3ffffff 64bit pref]
[ 0.320704] pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
[ 0.320706] pci_bus 0000:08: resource 1 [mem 0xf8000000-0xf80fffff]
[ 0.320709] pci_bus 0000:08: resource 2 [mem 0xc0000000-0xc00fffff pref]
[ 0.320712] pci_bus 0000:09: resource 1 [mem 0xf8100000-0xf81fffff]
[ 0.320715] pci_bus 0000:09: resource 4 [io 0x0000-0x0cf7]
[ 0.320718] pci_bus 0000:09: resource 5 [io 0x0d00-0xffff]
[ 0.320720] pci_bus 0000:09: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.320723] pci_bus 0000:09: resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.320726] pci_bus 0000:09: resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.320728] pci_bus 0000:09: resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.320731] pci_bus 0000:09: resource 10 [mem 0xc0000000-0xdfffffff]
[ 0.320734] pci_bus 0000:09: resource 11 [mem 0xf0000000-0xfebfffff]
[ 0.320830] NET: Registered protocol family 2
[ 0.321074] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.322679] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.328896] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.329687] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.329690] TCP reno registered
[ 0.329704] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.329768] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.330176] NET: Registered protocol family 1
[ 0.330392] pci 0000:01:00.0: Boot video device
[ 0.330419] PCI: CLS 64 bytes, default 64
[ 0.330488] Unpacking initramfs...
[ 0.369353] Freeing initrd memory: 2200k freed
[ 0.370476] Simple Boot Flag at 0x35 set to 0x1
[ 0.370972] audit: initializing netlink socket (disabled)
[ 0.370988] type=2000 audit(1320586961.369:1): initialized
[ 0.380802] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.401147] VFS: Disk quotas dquot_6.5.2
[ 0.401325] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.401521] msgmni has been set to 6037
[ 0.401788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.401833] io scheduler noop registered
[ 0.401836] io scheduler deadline registered
[ 0.401898] io scheduler cfq registered (default)
[ 0.402034] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.402072] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.402134] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.402193] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.402283] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.402342] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.402432] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.402491] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.402686] intel_idle: MWAIT substates: 0x22220
[ 0.402689] intel_idle: does not run on family 6 model 15
[ 0.402694] ERST: Table is not found!
[ 0.402765] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.603627] Linux agpgart interface v0.103
[ 0.603727] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.625005] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.625045] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.625141] mousedev: PS/2 mouse device common for all mice
[ 0.627290] rtc_cmos 00:08: RTC can wake from S4
[ 0.627416] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.627450] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.627461] cpuidle: using governor ladder
[ 0.627463] cpuidle: using governor menu
[ 0.627728] TCP cubic registered
[ 0.627731] NET: Registered protocol family 17
[ 0.627740] Registering the dns_resolver key type
[ 0.627861] PM: Hibernation image not present or could not be loaded.
[ 0.627867] registered taskstats version 1
[ 0.637491] rtc_cmos 00:08: setting system clock to 2011-11-06 13:42:42 UTC (1320586962)
[ 0.637554] Initializing network drop monitor service
[ 0.639163] Freeing unused kernel memory: 712k freed
[ 0.639370] Write protecting the kernel read-only data: 6144k
[ 0.639542] Freeing unused kernel memory: 12k freed
[ 0.642762] Freeing unused kernel memory: 776k freed
[ 0.652005] udevd[37]: starting version 174
[ 0.661005] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.712421] usbcore: registered new interface driver usbfs
[ 0.712452] usbcore: registered new interface driver hub
[ 0.712861] usbcore: registered new device driver usb
[ 0.714129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.714176] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.714199] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.714204] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.714256] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.714293] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.721629] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.721658] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
[ 0.733414] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.733616] hub 1-0:1.0: USB hub found
[ 0.733621] hub 1-0:1.0: 4 ports detected
[ 0.733740] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.733767] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.733772] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.733928] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.733968] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.740812] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.740839] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
[ 0.756276] SCSI subsystem initialized
[ 0.763405] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.763606] hub 2-0:1.0: USB hub found
[ 0.763612] hub 2-0:1.0: 6 ports detected
[ 0.766819] libata version 3.00 loaded.
[ 0.768867] ahci 0000:00:1f.2: version 3.0
[ 0.768891] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.768950] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 0.769022] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 0.769027] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 0.769033] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.769769] scsi0 : ahci
[ 0.770124] scsi1 : ahci
[ 0.770204] scsi2 : ahci
[ 0.770347] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 44
[ 0.770352] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 44
[ 0.770355] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 44
[ 0.780764] ata_piix 0000:00:1f.1: version 2.13
[ 0.780782] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.780828] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.781218] scsi3 : ata_piix
[ 0.781306] scsi4 : ata_piix
[ 0.781726] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.781729] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.857333] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.857390] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.857402] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.857407] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.857423] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.857475] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.857662] hub 3-0:1.0: USB hub found
[ 0.857667] hub 3-0:1.0: 2 ports detected
[ 0.857769] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.857777] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.857781] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.857790] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.857833] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.857993] hub 4-0:1.0: USB hub found
[ 0.857998] hub 4-0:1.0: 2 ports detected
[ 0.858094] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.858102] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.858106] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.858116] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.858154] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.858306] hub 5-0:1.0: USB hub found
[ 0.858311] hub 5-0:1.0: 2 ports detected
[ 0.858396] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.858406] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.858411] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.858429] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.858475] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.858621] hub 6-0:1.0: USB hub found
[ 0.858625] hub 6-0:1.0: 2 ports detected
[ 0.858708] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.858715] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.858720] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.858728] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.858762] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.858914] hub 7-0:1.0: USB hub found
[ 0.858919] hub 7-0:1.0: 2 ports detected
[ 0.950398] ata4.00: ATAPI: Optiarc BD ROM BC-5500A, 1.86, max MWDMA2
[ 0.963614] ata4.00: configured for MWDMA2
[ 1.090033] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.090057] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.090090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.090919] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.090924] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 1.090928] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.091030] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.091035] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 1.091038] ata3.00: 488397168 sectors, multi 16: LBA48
[ 1.091928] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.091933] ata1.00: configured for UDMA/100
[ 1.092038] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.092044] ata3.00: configured for UDMA/100
[ 1.092136] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.092469] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 1.093620] scsi 3:0:0:0: CD-ROM Optiarc BD ROM BC-5500A 1.86 PQ: 0 ANSI: 5
[ 1.102218] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.102259] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.102284] sd 0:0:0:0: [sda] Write Protect is off
[ 1.102288] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.102315] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.102321] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.102325] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.102350] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.103373] usb 2-2: new high speed USB device number 2 using ehci_hcd
[ 1.104870] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.104875] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.105203] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.127901] sdb: sdb1
[ 1.128208] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.135068] sda: sda1 sda2 sda3
[ 1.135397] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.343378] usb 2-4: new high speed USB device number 3 using ehci_hcd
[ 1.373352] Refined TSC clocksource calibration: 1828.949 MHz.
[ 1.373358] Switching to clocksource tsc
[ 1.541611] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 1.586684] usb 4-2: new low speed USB device number 2 using uhci_hcd
[ 3.620978] udevd[241]: starting version 174
[ 3.860528] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.860538] ACPI: Power Button [PWRB]
[ 3.860977] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.860983] ACPI: Sleep Button [SLPB]
[ 3.862532] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 3.863014] ACPI: Lid Switch [LID]
[ 3.864840] ACPI: AC Adapter [ACAD] (on-line)
[ 3.865293] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.865301] ACPI: Power Button [PWRF]
[ 3.954841] ACPI: acpi_idle registered with cpuidle
[ 3.958941] Monitor-Mwait will be used to enter C-1 state
[ 3.959002] Monitor-Mwait will be used to enter C-2 state
[ 3.959024] [Firmware Bug]: Invalid critical threshold (0)
[ 3.959341] Monitor-Mwait will be used to enter C-3 state
[ 3.959379] Marking TSC unstable due to TSC halts in idle
[ 3.960679] Switching to clocksource hpet
[ 3.961405] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.961408] ACPI: Thermal Zone [THR1] (49 C)
[ 3.964908] acpi device:05: registered as cooling_device1
[ 3.965003] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[ 3.965627] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 3.979488] r592 0000:09:09.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.979831] r592: driver successfully loaded
[ 4.034101] ACPI: Battery Slot [BAT0] (battery present)
[ 4.114730] iTCO_vendor_support: vendor-support=0
[ 4.188196] wmi: Mapper loaded
[ 4.223279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 4.223440] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 4.224124] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.283008] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 4.327775] sdhci: Secure Digital Host Controller Interface driver
[ 4.327778] sdhci: Copyright(c) Pierre Ossman
[ 4.337983] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 4.338003] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.339134] sdhci-pci 0000:09:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.339152] _regulator_get: 0000:09:09.1 supply vmmc not found, using dummy regulator
[ 4.340202] Registered led device: mmc0::
[ 4.341284] mmc0: SDHCI controller on PCI [0000:09:09.1] using DMA
[ 4.341896] firewire_ohci 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.348208] [drm] Initialized drm 1.1.0 20060810
[ 4.374187] input: Genius 4D Scroll Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input6
[ 4.374312] generic-usb 0003:0458:0056.0001: input,hidraw0: USB HID v1.10 Mouse [Genius 4D Scroll Mouse] on usb-0000:00:1a.1-2/input0
[ 4.374333] usbcore: registered new interface driver usbhid
[ 4.374336] usbhid: USB HID core driver
[ 4.394502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.394529] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.394593] r8169 0000:08:00.0: setting latency timer to 64
[ 4.394688] r8169 0000:08:00.0: irq 45 for MSI/MSI-X
[ 4.394951] r8169 0000:08:00.0: eth0: RTL8168b/8111b at 0xffffc900115c0000, 00:1e:68:22:0d:d6, XID 18000000 IRQ 45
[ 4.400195] firewire_ohci: Added fw-ohci device 0000:09:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 4.420843] Initializing USB Mass Storage driver...
[ 4.420973] scsi5 : usb-storage 2-2:1.0
[ 4.421105] usbcore: registered new interface driver usb-storage
[ 4.421107] USB Mass Storage support registered.
[ 4.429004] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 4.438830] Linux media interface: v0.10
[ 4.439547] usbcore: registered new interface driver uas
[ 4.441419] cfg80211: Calling CRDA to update world regulatory domain
[ 4.472037] Linux video capture interface: v2.00
[ 4.486614] uvcvideo: Found UVC 1.00 device HP Webcam (04f2:b023)
[ 4.492079] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8
[ 4.492141] usbcore: registered new interface driver uvcvideo
[ 4.492144] USB Video Class driver (v1.1.0)
[ 4.629028] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 4.629035] nouveau 0000:01:00.0: power state changed by ACPI to D0
[ 4.629046] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.629054] nouveau 0000:01:00.0: setting latency timer to 64
[ 4.631355] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
[ 4.638843] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 4.660115] r852 0000:09:09.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.663396] r852: Non dma capable device detected, dma disabled
[ 4.663425] r852: driver loaded successfully
[ 4.728189] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 4.728195] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 4.728198] [drm] nouveau 0000:01:00.0: Bios version 60.86.4f.00
[ 4.728203] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 4.728205] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 4.728208] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 4.728212] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00000034
[ 4.728215] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028
[ 4.728218] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
[ 4.728221] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080
[ 4.728223] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
[ 4.728227] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2
[ 4.728231] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff
[ 4.728235] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff
[ 4.728238] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07
[ 4.728241] [drm] nouveau 0000:01:00.0: 3: 0x00000310: type 0x10 idx 3 tag 0xff
[ 4.728245] [drm] nouveau 0000:01:00.0: 4: 0x00000311: type 0x11 idx 4 tag 0xff
[ 4.728248] [drm] nouveau 0000:01:00.0: 5: 0x00000313: type 0x13 idx 5 tag 0xff
[ 4.728254] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC581
[ 4.751487] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC8D1
[ 4.767845] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD512
[ 4.767855] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD604
[ 4.768931] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD7FE
[ 4.768933] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD863
[ 4.783649] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 4.783652] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 4.783734] iwl3945 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.783750] iwl3945 0000:02:00.0: setting latency timer to 64
[ 4.788943] [drm] nouveau 0000:01:00.0: 0xD863: Condition still not met after 20ms, skipping following opcodes
[ 4.808414] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 4.808421] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 1150mV fanspeed 100% timing 0
[ 4.808426] [drm] nouveau 0000:01:00.0: 1: memory 200MHz core 275MHz shader 550MHz voltage 1150mV fanspeed 100% timing 1
[ 4.808432] [drm] nouveau 0000:01:00.0: 2: memory 400MHz core 500MHz shader 1000MHz voltage 1200mV fanspeed 100% timing 3
[ 4.808451] [drm] nouveau 0000:01:00.0: c: memory 199MHz core 275MHz shader 550MHz voltage 1200mV
[ 4.810122] [TTM] Zone kernel: Available graphics memory: 1546316 kiB.
[ 4.810125] [TTM] Initializing pool allocator.
[ 4.810148] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 4.816384] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.836699] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.836784] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 4.836842] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.845258] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 4.845263] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 4.845413] iwl3945 0000:02:00.0: irq 47 for MSI/MSI-X
[ 4.845721] Registered led device: phy0-led
[ 4.882355] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 4.882624] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 4.882627] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 4.882815] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 4.885055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.885059] [drm] No driver support for vblank timestamp query.
[ 4.900126] firewire_core: created device fw0: GUID 00241b00e8a3be00, S400
[ 5.098009] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 5.101986] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x40000000, bo ffff8800b9a04800
[ 5.102069] fbcon: nouveaufb (fb0) is primary device
[ 5.111353] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
[ 5.167210] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.167290] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.218616] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input12
[ 5.421315] scsi 5:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 5.422661] sd 5:0:0:0: [sdc] 7827456 512-byte logical blocks: (4.00 GB/3.73 GiB)
[ 5.423168] sd 5:0:0:0: [sdc] Write Protect is off
[ 5.423172] sd 5:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 5.423672] sd 5:0:0:0: [sdc] No Caching mode page present
[ 5.423675] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 5.429540] sd 5:0:0:0: [sdc] No Caching mode page present
[ 5.429543] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 5.430063] sdc: sdc1
[ 5.432036] sd 5:0:0:0: [sdc] No Caching mode page present
[ 5.432040] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 5.432042] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[ 6.160954] Console: switching to colour frame buffer device 180x56
[ 6.163432] fb0: nouveaufb frame buffer device
[ 6.163434] drm: registered panic notifier
[ 6.163442] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 6.732886] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 6.950620] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.966588] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.084796] Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k
[ 9.143563] r8169 0000:08:00.0: eth0: link down
[ 9.143572] r8169 0000:08:00.0: eth0: link down
[ 11.625158] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
[ 13.659460] NET: Registered protocol family 10
[ 13.660273] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.660460] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.816958] FS-Cache: Loaded
[ 13.841072] FS-Cache: Netfs 'cifs' registered for caching
[ 13.871446] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.880618] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.884067] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.897017] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.901572] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.913913] CIFS VFS: cifs_mount failed w/return code = -101
[ 13.917007] CIFS VFS: Error connecting to socket. Aborting operation
[ 13.930569] CIFS VFS: cifs_mount failed w/return code = -101
[ 16.370722] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
[ 16.372460] wlan0: authenticated
[ 16.375907] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
[ 16.386877] wlan0: RX AssocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
[ 16.386885] wlan0: associated
[ 16.389143] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 16.491123] Intel AES-NI instructions are not detected.
[ 16.677727] padlock_aes: VIA PadLock not detected.
[ 27.296946] wlan0: no IPv6 routers present
[ 50.863694] r8169 0000:08:00.0: eth0: link up
[ 50.864363] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 54.661658] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.1
[ 61.110061] eth0: no IPv6 routers present
[ 356.785500] wlan0: deauthenticated from 00:26:4d:36:95:d0 (Reason: 3)
[ 356.840075] cfg80211: Calling CRDA for country: DE
[ 360.656160] wlan0: authenticate with 00:26:4d:36:95:d0 (try 1)
[ 360.658086] wlan0: authenticated
[ 360.658215] wlan0: associate with 00:26:4d:36:95:d0 (try 1)
[ 360.670543] wlan0: RX ReassocResp from 00:26:4d:36:95:d0 (capab=0x411 status=0 aid=1)
[ 360.670550] wlan0: associated
The slow startup would not be a problem but netfs and mpd do not like it when the network is not up when they start (mpd music dir is on a network share), so I have to manually restart netfs every time I reboot.
Other computers on the same network do not have the same problem, so I do not think it has anything to with the router.
Is there anything I can do to make my ethernet card initialize faster?
If you need any more information, please ask.
Last edited by rtoijala (2011-11-07 14:32:27)Strike0 wrote:... but dont you need some sort of dhcp client/or daemon for that as well?
Try adding dhcpd to your rc.conf array.
Netcfg seems to automatically start dhcpcd (I can see it htop).
Strike0 wrote:Alternatively check this: https://wiki.archlinux.org/index.php/Ne … _of_dhcpcd
This did not change the time. The only change was that netcfg started dhclient instead of dhcpcd.
Strike0 wrote:what happens if you pull the network cable after it got the link, wait until network is unreachable and then plug it in again? Does that take 40 seconds as well for the new dhcp lease?
Yes, it takes 40-60 seconds to get a connection after plugging the cable in again.
ratcheer wrote:What driver is your kernel loading? I have a very similar Realtek ethernet controller and it does not work well at all with the kernel's default r8169 driver. I had to go to Realtek's website and download the older driver r8168, which works perfectly for me.
My kernel is loading r8169. r8168 is available in the AUR. I'm going to try it as soon as I can.
Thanks.
EDIT: r8168 needed only 10 seconds from loading the driver to having a connection. Thank you for the tip! Including [SOLVED] in thread topic.
Last edited by rtoijala (2011-11-07 14:32:47) -
Update on BIOS & MEMORY problems? also DOT, PAT, settings...
Okie dokie, I'm new here, and I've been pouring through threads for the past 2-3 hours and doing searches, so please excuse these questions if they seem to have already been answered, but I would like to just ask a few (hopefully susinct) questions to get the quickest and most direct answers possible...
I just bought the 865pe-LS board, p-4 2.6ghz 800FSB HT CPU, and value-select Corsair PC3200 512MB dual-channel kit, and it has become apparent that there is or has been a HUGE problem with this board accepting corsiar memory. ARGH or should is say DOH for not checking into all of this BEFOREHAND!
But it seems that several bios versions have come out since the majority of those threads I have been reading about back in august. Sooo, can anyone tell me if the current version, 1.9 bios, has fixed these incompatibilities with the corsairs memory sticks? I realize that most people are going the LL version routes for the memory, and I have opted for the value-select versions...but it still seems to be a possible dilemma. I am wondering if it is worth it to try to pay the 15% restock fee or sell it on ebay (hopefully for about what I paid) and go get the same stuff in kingston memory instead, since these seem to be much more compatible? Or has this problem been fixed with newer bios versions?
Another important factor to consider, I think, is that I may not be THAT interested in overclocking much of anything, but perhaps just wishing to use the fast or turbo modes, probably not ultra-turbo since i would need the XMS or hyper-X versions to even try this. If the bios is now accepting corsair, I am trying to figure out, short of "experimenting" since i have not gotten all of my components in yet, if its even possible or recommended to overclock or use the fast/turbo mode with the cas-3 value select dual-channel setup I will be using...any clues?
Lastly, which may have been already answered by now, is it best to use the PAT or DOT settings or opt for manual setting for any sort of higher-performance setup, considering my specs for my soon-to-be new computer? Or does it really make THAT much difference? Im not into squeezing out every nano-second of speed, but if a little tweaking would make a BIG difference and wouldnt require me spending MANY hours or days to do so, then I'm all for it. I'm practically a noob at this stuff, only really educating myself in any depth about all this stuff tonight (going off of what outhers have recommended in making these purchases)...thanks for the understanding and the help in advance!
*looking for any help*
is how i feel, haha...*sigh*There doesn't seem to be any particular Ram type that is working for everybody. Also, many people that are experiencing problems are trying to overclock(some to extremes). You don't seem very interested in that aspect. For the Ram, you really just have to put it in and see what happens.
If you haven't already, read the FAQ HERE for the Neo/Neo2 boards. Particularly #5 which will help you setup the SATA/IDE devices in the Bios. Use Native mode for Windows XP.
Things I would set in the Bios right out of the box:
(Some of these might already be set by default)
Boot device select- Order that you want to boot from particular devices. Might have to set "On-chip IDE Config" items first and re-boot to see all your devices here.
HT-On
MPS revision-1.4
APIC ACPI....- Enabled
Dram Timing- By SPD
Integrated Peripherals is fairly intuitive except the "On-chip IDE config" see FAQ page.
DOT- disabled for now
MAT- slow to start
DRAM freq- 400
CPU Bus- 201(seems strange but do it; try a search here for "201" and you'll know why)
DDR voltage- 2.7v (like reilly said)
If this works OK(try something that stresses it) you can try raising the MAT to fast. After you're happy that this is stable, you can try turbo if you want but I'm not sure with the value Ram. Once you settle on this, try playing with the DOT features. I think General is the equivalent of a 10% increase on the system. Once you've found a setting you like here, you should leave it for a while and just enjoy your new compputer!
If you get bored, you can always go in and disable the DOT and manually raise FSB for more fun.
Things you should read up on before you do any overclocking:
Clearing CMOS
5:4 FSB/MEM ratio
Have fun! -
Slow GDM - different issues than other posts
Hi all,
GDM is slow to start (compare to what it use to be) the issue is I can't pin point why, as I have made a lot of updates lately including moving to Grub2 and changing quite a few .pacnew today (I know I should do it right away...)
I seems however to be an issue with the nvidia driver (see below xorg.0.log for more information)
FYI I run dual screen with twinview
Many thanks for your assistance,
Regards,
[ 11.851]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[ 11.851] X Protocol Version 11, Revision 0
[ 11.851] Build Operating System: Linux 3.4.4-3-ARCH i686
[ 11.851] Current Operating System: Linux (none) 3.4.6-1-ARCH #1 SMP PREEMPT Fri Jul 20 07:24:45 UTC 2012 i686
[ 11.851] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=f4a7ed0a-8a4a-4e43-8b57-4ccddec8f31e ro quiet
[ 11.851] Build Date: 09 July 2012 04:03:16PM
[ 11.851]
[ 11.851] Current version of pixman: 0.26.2
[ 11.851] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.851] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.851] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 28 14:50:20 2012
[ 11.908] (==) Using config file: "/etc/X11/xorg.conf"
[ 11.908] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 11.940] (==) ServerLayout "Layout0"
[ 11.940] (**) |-->Screen "Screen0" (0)
[ 11.940] (**) | |-->Monitor "Monitor0"
[ 11.959] (**) | |-->Device "Device0"
[ 11.959] (**) |-->Input Device "Keyboard0"
[ 11.959] (**) |-->Input Device "Mouse0"
[ 11.959] (**) Option "BlankTime" "0"
[ 11.959] (**) Option "StandbyTime" "0"
[ 11.959] (**) Option "SuspendTime" "0"
[ 11.959] (**) Option "OffTime" "0"
[ 11.959] (**) Option "Xinerama" "0"
[ 11.959] (==) Automatically adding devices
[ 11.959] (==) Automatically enabling devices
[ 12.050] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.050] Entry deleted from font path.
[ 12.161] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 12.161] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.161] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 12.161] (WW) Disabling Mouse0
[ 12.161] (II) Loader magic: 0x82235a0
[ 12.161] (II) Module ABI versions:
[ 12.161] X.Org ANSI C Emulation: 0.4
[ 12.161] X.Org Video Driver: 12.0
[ 12.161] X.Org XInput driver : 16.0
[ 12.161] X.Org Server Extension : 6.0
[ 12.162] (--) PCI:*(0:1:0:0) 10de:1245:196e:085a rev 161, Mem @ 0xfc000000/33554432, 0xd8000000/134217728, 0xd4000000/67108864, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
[ 12.162] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12.162] (II) LoadModule: "extmod"
[ 12.253] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 12.302] (II) Module extmod: vendor="X.Org Foundation"
[ 12.302] compiled for 1.12.3, module version = 1.0.0
[ 12.302] Module class: X.Org Server Extension
[ 12.302] ABI class: X.Org Server Extension, version 6.0
[ 12.302] (II) Loading extension MIT-SCREEN-SAVER
[ 12.302] (II) Loading extension XFree86-VidModeExtension
[ 12.302] (II) Loading extension XFree86-DGA
[ 12.312] (II) Loading extension DPMS
[ 12.312] (II) Loading extension XVideo
[ 12.312] (II) Loading extension XVideo-MotionCompensation
[ 12.312] (II) Loading extension X-Resource
[ 12.312] (II) LoadModule: "dbe"
[ 12.312] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 12.328] (II) Module dbe: vendor="X.Org Foundation"
[ 12.329] compiled for 1.12.3, module version = 1.0.0
[ 12.329] Module class: X.Org Server Extension
[ 12.329] ABI class: X.Org Server Extension, version 6.0
[ 12.329] (II) Loading extension DOUBLE-BUFFER
[ 12.329] (II) LoadModule: "glx"
[ 12.329] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.332] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.332] compiled for 4.0.2, module version = 1.0.0
[ 13.332] Module class: X.Org Server Extension
[ 13.332] (II) NVIDIA GLX Module 302.17 Tue Jun 12 18:58:55 PDT 2012
[ 13.332] (II) Loading extension GLX
[ 13.332] (II) LoadModule: "record"
[ 13.332] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 13.347] (II) Module record: vendor="X.Org Foundation"
[ 13.347] compiled for 1.12.3, module version = 1.13.0
[ 13.347] Module class: X.Org Server Extension
[ 13.347] ABI class: X.Org Server Extension, version 6.0
[ 13.347] (II) Loading extension RECORD
[ 13.347] (II) LoadModule: "dri"
[ 13.347] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 13.364] (II) Module dri: vendor="X.Org Foundation"
[ 13.364] compiled for 1.12.3, module version = 1.0.0
[ 13.364] ABI class: X.Org Server Extension, version 6.0
[ 13.364] (II) Loading extension XFree86-DRI
[ 13.364] (II) LoadModule: "dri2"
[ 13.364] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 13.364] (II) Module dri2: vendor="X.Org Foundation"
[ 13.364] compiled for 1.12.3, module version = 1.2.0
[ 13.364] ABI class: X.Org Server Extension, version 6.0
[ 13.364] (II) Loading extension DRI2
[ 13.364] (II) LoadModule: "nvidia"
[ 13.383] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.456] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.456] compiled for 4.0.2, module version = 1.0.0
[ 13.456] Module class: X.Org Video Driver
[ 13.480] (II) LoadModule: "evdev"
[ 13.480] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.501] (II) Module evdev: vendor="X.Org Foundation"
[ 13.501] compiled for 1.12.3, module version = 2.7.1
[ 13.501] Module class: X.Org XInput Driver
[ 13.501] ABI class: X.Org XInput driver, version 16.0
[ 13.508] (II) NVIDIA dlloader X Driver 302.17 Tue Jun 12 18:39:24 PDT 2012
[ 13.508] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.509] (++) using VT number 7
[ 13.529] (II) Loading sub module "fb"
[ 13.529] (II) LoadModule: "fb"
[ 13.529] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.548] (II) Module fb: vendor="X.Org Foundation"
[ 13.548] compiled for 1.12.3, module version = 1.0.0
[ 13.548] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.548] (II) Loading sub module "wfb"
[ 13.548] (II) LoadModule: "wfb"
[ 13.548] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.596] (II) Module wfb: vendor="X.Org Foundation"
[ 13.596] compiled for 1.12.3, module version = 1.0.0
[ 13.596] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.597] (II) Loading sub module "ramdac"
[ 13.597] (II) LoadModule: "ramdac"
[ 13.597] (II) Module "ramdac" already built-in
[ 13.626] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.626] (==) NVIDIA(0): RGB weight 888
[ 13.626] (==) NVIDIA(0): Default visual is TrueColor
[ 13.626] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.626] (**) NVIDIA(0): Option "NoLogo" "true"
[ 13.626] (**) NVIDIA(0): Option "RenderAccel" "true"
[ 13.626] (**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-1"
[ 13.627] (**) NVIDIA(0): Enabling RENDER acceleration
[ 13.627] (**) NVIDIA(0): Option "MetaModes" "CRT-0: nvidia-auto-select +1440+0, CRT-1: nvidia-auto-select +0+82"
[ 13.627] (**) NVIDIA(0): Enabling 2D acceleration
[ 14.712] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 14.712] (II) NVIDIA(GPU-0): Vision stereo.
[ 14.718] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 14.718] (II) NVIDIA(GPU-0): stereo.
[ 14.720] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF116) at PCI:1:0:0 (GPU-0)
[ 14.720] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 14.720] (--) NVIDIA(0): VideoBIOS: 70.26.3e.00.10
[ 14.720] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.720] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 14.723] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[ 14.723] (--) NVIDIA(0): ViewSonic VA902 (CRT-0) (connected)
[ 14.723] (--) NVIDIA(0): AOC N19W (CRT-1) (connected)
[ 14.723] (--) NVIDIA(0): DFP-0
[ 14.723] (--) NVIDIA(0): DFP-1
[ 14.723] (--) NVIDIA(0): DFP-2
[ 14.723] (--) NVIDIA(0): ViewSonic VA902 (CRT-0): 400.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): AOC N19W (CRT-1): 400.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 14.723] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 14.723] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[ 14.723] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 14.723] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.723] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 14.723] (**) NVIDIA(0): been enabled on all display devices.)
[ 14.732] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.733] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 14.733] (**) NVIDIA(0): enabled on all display devices.)
[ 14.740] (II) NVIDIA(0): Validated modes:
[ 14.740] (II) NVIDIA(0):
[ 14.740] (II) NVIDIA(0): "CRT-0:nvidia-auto-select+1440+0,CRT-1:nvidia-auto-select+0+82"
[ 14.740] (II) NVIDIA(0): Virtual screen size determined to be 2720 x 1024
[ 14.762] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
[ 14.762] (--) NVIDIA(0): option
[ 14.763] (--) Depth 24 pixmap format is 32 bpp
[ 14.763] (II) NVIDIA: Using 1024.00 MB of virtual memory for indirect memory
[ 14.763] (II) NVIDIA: access.
[ 14.766] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 14.766] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 14.766] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 14.766] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 14.766] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 14.766] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 14.766] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 14.766] (II) NVIDIA(0): Config Options in the README.
[ 14.769] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select+1440+0,CRT-1:nvidia-auto-select+0+82"
[ 14.841] (II) Loading extension NV-GLX
[ 14.968] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14.968] (==) NVIDIA(0): Backing store disabled
[ 14.968] (==) NVIDIA(0): Silken mouse enabled
[ 14.968] (**) NVIDIA(0): DPMS enabled
[ 14.968] (II) Loading extension NV-CONTROL
[ 14.968] (II) Loading extension XINERAMA
[ 14.968] (WW) NVIDIA(0): Option "AGPFastWrite" is not used
[ 14.968] (WW) NVIDIA(0): Option "EnablePageFlip" is not used
[ 14.968] (WW) NVIDIA(0): Option "TwinView" is not used
[ 14.968] (II) Loading sub module "dri2"
[ 14.968] (II) LoadModule: "dri2"
[ 14.968] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.968] (II) Module dri2: vendor="X.Org Foundation"
[ 14.968] compiled for 1.12.3, module version = 1.2.0
[ 14.968] ABI class: X.Org Server Extension, version 6.0
[ 14.968] (II) NVIDIA(0): [DRI2] Setup complete
[ 14.968] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.969] (--) RandR disabled
[ 14.969] (II) Initializing built-in extension Generic Event Extension
[ 14.969] (II) Initializing built-in extension SHAPE
[ 14.969] (II) Initializing built-in extension MIT-SHM
[ 14.969] (II) Initializing built-in extension XInputExtension
[ 14.969] (II) Initializing built-in extension XTEST
[ 14.969] (II) Initializing built-in extension BIG-REQUESTS
[ 14.969] (II) Initializing built-in extension SYNC
[ 14.969] (II) Initializing built-in extension XKEYBOARD
[ 14.969] (II) Initializing built-in extension XC-MISC
[ 14.969] (II) Initializing built-in extension SECURITY
[ 14.969] (II) Initializing built-in extension XINERAMA
[ 14.969] (II) Initializing built-in extension XFIXES
[ 14.969] (II) Initializing built-in extension RENDER
[ 14.969] (II) Initializing built-in extension RANDR
[ 14.969] (II) Initializing built-in extension COMPOSITE
[ 14.969] (II) Initializing built-in extension DAMAGE
[ 14.971] (II) Initializing extension GLX
[ 15.344] (II) Using input driver 'evdev' for 'Keyboard0'
[ 15.344] (**) Option "CoreKeyboard"
[ 15.344] (**) Keyboard0: always reports core events
[ 15.344] (EE) evdev: Keyboard0: No device specified.
[ 15.344] (EE) PreInit returned 2 for "Keyboard0"
[ 15.344] (II) UnloadModule: "evdev"
[ 15.346] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 15.346] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.346] (II) Using input driver 'evdev' for 'Power Button'
[ 15.346] (**) Power Button: always reports core events
[ 15.346] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 15.346] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.346] (--) evdev: Power Button: Found keys
[ 15.346] (II) evdev: Power Button: Configuring as keyboard
[ 15.346] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 15.346] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.346] (**) Option "xkb_rules" "evdev"
[ 15.346] (**) Option "xkb_model" "evdev"
[ 15.346] (**) Option "xkb_layout" "us"
[ 15.366] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 15.366] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.366] (II) Using input driver 'evdev' for 'Power Button'
[ 15.366] (**) Power Button: always reports core events
[ 15.366] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 15.366] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.366] (--) evdev: Power Button: Found keys
[ 15.366] (II) evdev: Power Button: Configuring as keyboard
[ 15.366] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
[ 15.366] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 15.366] (**) Option "xkb_rules" "evdev"
[ 15.366] (**) Option "xkb_model" "evdev"
[ 15.366] (**) Option "xkb_layout" "us"
[ 15.366] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
[ 15.366] (II) No input driver specified, ignoring this device.
[ 15.366] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
[ 15.367] (II) No input driver specified, ignoring this device.
[ 15.367] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
[ 15.367] (II) No input driver specified, ignoring this device.
[ 15.367] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
[ 15.367] (II) No input driver specified, ignoring this device.
[ 15.367] (II) This device may have been added with another device file.
[ 15.367] (II) config/udev: Adding input device UVC Camera (046d:0809) (/dev/input/event13)
[ 15.367] (**) UVC Camera (046d:0809): Applying InputClass "evdev keyboard catchall"
[ 15.367] (II) Using input driver 'evdev' for 'UVC Camera (046d:0809)'
[ 15.367] (**) UVC Camera (046d:0809): always reports core events
[ 15.367] (**) evdev: UVC Camera (046d:0809): Device: "/dev/input/event13"
[ 15.367] (--) evdev: UVC Camera (046d:0809): Vendor 0x46d Product 0x809
[ 15.367] (--) evdev: UVC Camera (046d:0809): Found keys
[ 15.367] (II) evdev: UVC Camera (046d:0809): Configuring as keyboard
[ 15.367] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input13/event13"
[ 15.367] (II) XINPUT: Adding extended input device "UVC Camera (046d:0809)" (type: KEYBOARD, id 8)
[ 15.367] (**) Option "xkb_rules" "evdev"
[ 15.367] (**) Option "xkb_model" "evdev"
[ 15.367] (**) Option "xkb_layout" "us"
[ 15.368] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event10)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.368] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event11)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.368] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event12)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.368] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event7)
[ 15.368] (II) No input driver specified, ignoring this device.
[ 15.368] (II) This device may have been added with another device file.
[ 15.369] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event8)
[ 15.369] (II) No input driver specified, ignoring this device.
[ 15.369] (II) This device may have been added with another device file.
[ 15.369] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event9)
[ 15.369] (II) No input driver specified, ignoring this device.
[ 15.369] (II) This device may have been added with another device file.
[ 15.369] (II) config/udev: Adding input device Logitech G500 (/dev/input/event0)
[ 15.369] (**) Logitech G500: Applying InputClass "evdev pointer catchall"
[ 15.369] (II) Using input driver 'evdev' for 'Logitech G500'
[ 15.369] (**) Logitech G500: always reports core events
[ 15.369] (**) evdev: Logitech G500: Device: "/dev/input/event0"
[ 15.369] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[ 15.369] (--) evdev: Logitech G500: Found 20 mouse buttons
[ 15.369] (--) evdev: Logitech G500: Found scroll wheel(s)
[ 15.369] (--) evdev: Logitech G500: Found relative axes
[ 15.369] (--) evdev: Logitech G500: Found x and y relative axes
[ 15.369] (II) evdev: Logitech G500: Configuring as mouse
[ 15.369] (II) evdev: Logitech G500: Adding scrollwheel support
[ 15.369] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[ 15.369] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.369] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0/event0"
[ 15.369] (II) XINPUT: Adding extended input device "Logitech G500" (type: MOUSE, id 9)
[ 15.369] (II) evdev: Logitech G500: initialized for relative axes.
[ 15.369] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 15.369] (**) Logitech G500: (accel) acceleration profile 0
[ 15.370] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 15.370] (**) Logitech G500: (accel) acceleration threshold: 4
[ 15.370] (II) config/udev: Adding input device Logitech G500 (/dev/input/mouse0)
[ 15.370] (II) No input driver specified, ignoring this device.
[ 15.370] (II) This device may have been added with another device file.
[ 15.370] (II) config/udev: Adding input device Logitech G500 (/dev/input/event1)
[ 15.370] (**) Logitech G500: Applying InputClass "evdev keyboard catchall"
[ 15.370] (II) Using input driver 'evdev' for 'Logitech G500'
[ 15.370] (**) Logitech G500: always reports core events
[ 15.370] (**) evdev: Logitech G500: Device: "/dev/input/event1"
[ 15.370] (--) evdev: Logitech G500: Vendor 0x46d Product 0xc068
[ 15.370] (--) evdev: Logitech G500: Found 1 mouse buttons
[ 15.370] (--) evdev: Logitech G500: Found scroll wheel(s)
[ 15.370] (--) evdev: Logitech G500: Found relative axes
[ 15.370] (II) evdev: Logitech G500: Forcing relative x/y axes to exist.
[ 15.370] (--) evdev: Logitech G500: Found absolute axes
[ 15.370] (II) evdev: Logitech G500: Forcing absolute x/y axes to exist.
[ 15.370] (--) evdev: Logitech G500: Found keys
[ 15.370] (II) evdev: Logitech G500: Configuring as mouse
[ 15.370] (II) evdev: Logitech G500: Configuring as keyboard
[ 15.370] (II) evdev: Logitech G500: Adding scrollwheel support
[ 15.370] (**) evdev: Logitech G500: YAxisMapping: buttons 4 and 5
[ 15.370] (**) evdev: Logitech G500: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.370] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input1/event1"
[ 15.370] (II) XINPUT: Adding extended input device "Logitech G500" (type: KEYBOARD, id 10)
[ 15.370] (**) Option "xkb_rules" "evdev"
[ 15.370] (**) Option "xkb_model" "evdev"
[ 15.370] (**) Option "xkb_layout" "us"
[ 15.370] (II) evdev: Logitech G500: initialized for relative axes.
[ 15.370] (WW) evdev: Logitech G500: ignoring absolute axes.
[ 15.371] (**) Logitech G500: (accel) keeping acceleration scheme 1
[ 15.371] (**) Logitech G500: (accel) acceleration profile 0
[ 15.371] (**) Logitech G500: (accel) acceleration factor: 2.000
[ 15.371] (**) Logitech G500: (accel) acceleration threshold: 4
[ 15.371] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event2)
[ 15.371] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.371] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[ 15.371] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 15.371] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event2"
[ 15.371] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[ 15.371] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[ 15.371] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 15.371] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2/event2"
[ 15.371] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 11)
[ 15.371] (**) Option "xkb_rules" "evdev"
[ 15.371] (**) Option "xkb_model" "evdev"
[ 15.371] (**) Option "xkb_layout" "us"
[ 15.371] (II) config/udev: Adding input device Logitech USB Multimedia Keyboard (/dev/input/event3)
[ 15.371] (**) Logitech USB Multimedia Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.371] (II) Using input driver 'evdev' for 'Logitech USB Multimedia Keyboard'
[ 15.372] (**) Logitech USB Multimedia Keyboard: always reports core events
[ 15.372] (**) evdev: Logitech USB Multimedia Keyboard: Device: "/dev/input/event3"
[ 15.372] (--) evdev: Logitech USB Multimedia Keyboard: Vendor 0x46d Product 0xc317
[ 15.372] (--) evdev: Logitech USB Multimedia Keyboard: Found keys
[ 15.372] (II) evdev: Logitech USB Multimedia Keyboard: Configuring as keyboard
[ 15.372] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3/event3"
[ 15.372] (II) XINPUT: Adding extended input device "Logitech USB Multimedia Keyboard" (type: KEYBOARD, id 12)
[ 15.372] (**) Option "xkb_rules" "evdev"
[ 15.372] (**) Option "xkb_model" "evdev"
[ 15.372] (**) Option "xkb_layout" "us"
[ 15.372] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 15.372] (II) No input driver specified, ignoring this device.
[ 15.372] (II) This device may have been added with another device file.
[ 15.462] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 15.462] (II) NVIDIA(GPU-0): Vision stereo.
[ 15.462] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.462] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 15.462] (**) NVIDIA(0): been enabled on all display devices.)
[ 15.477] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 15.477] (II) NVIDIA(GPU-0): stereo.
[ 15.477] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.477] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 15.477] (**) NVIDIA(0): enabled on all display devices.)
[ 27.188] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 27.188] (II) NVIDIA(GPU-0): Vision stereo.
[ 27.188] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.188] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 27.188] (**) NVIDIA(0): been enabled on all display devices.)
[ 27.203] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 27.203] (II) NVIDIA(GPU-0): stereo.
[ 27.203] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 27.203] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 27.203] (**) NVIDIA(0): enabled on all display devices.)
[ 50.273] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 50.273] (II) NVIDIA(GPU-0): Vision stereo.
[ 50.273] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 50.273] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 50.273] (**) NVIDIA(0): been enabled on all display devices.)
[ 50.289] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 50.289] (II) NVIDIA(GPU-0): stereo.
[ 50.289] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 50.289] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 50.289] (**) NVIDIA(0): enabled on all display devices.)
[ 57.536] (II) NVIDIA(GPU-0): Display (ViewSonic VA902 (CRT-0)) does not support NVIDIA 3D
[ 57.536] (II) NVIDIA(GPU-0): Vision stereo.
[ 57.536] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.536] (**) NVIDIA(0): device ViewSonic VA902 (CRT-0) (Using EDID frequencies has
[ 57.536] (**) NVIDIA(0): been enabled on all display devices.)
[ 57.552] (II) NVIDIA(GPU-0): Display (AOC N19W (CRT-1)) does not support NVIDIA 3D Vision
[ 57.552] (II) NVIDIA(GPU-0): stereo.
[ 57.552] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 57.552] (**) NVIDIA(0): device AOC N19W (CRT-1) (Using EDID frequencies has been
[ 57.552] (**) NVIDIA(0): enabled on all display devices.)
Last edited by sweetthdevil (2012-07-28 13:56:48)Right so the line in /etc/default/grub shouldn't like that?
GRUB_GFXPAYLOAD_LINUX=keep
and see below the dmesg output, I couldn't see anything wrong
Many thanks for your assistance
[ 0.208614] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.208617] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.208642] pnp 00:02: [dma 4]
[ 0.208644] pnp 00:02: [io 0x0000-0x000f]
[ 0.208645] pnp 00:02: [io 0x0081-0x0083]
[ 0.208647] pnp 00:02: [io 0x0087]
[ 0.208648] pnp 00:02: [io 0x0089-0x008b]
[ 0.208649] pnp 00:02: [io 0x008f]
[ 0.208651] pnp 00:02: [io 0x00c0-0x00df]
[ 0.208671] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.208679] pnp 00:03: [io 0x0070-0x0071]
[ 0.208686] pnp 00:03: [irq 8]
[ 0.208706] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.208712] pnp 00:04: [io 0x0061]
[ 0.208733] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.208741] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.208746] pnp 00:05: [irq 13]
[ 0.208766] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.208816] pnp 00:06: [io 0x0000-0xffffffff disabled]
[ 0.208818] pnp 00:06: [io 0x0000-0xffffffff disabled]
[ 0.208820] pnp 00:06: [io 0x0290-0x029f]
[ 0.208856] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.208858] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.208937] pnp 00:07: [io 0x0010-0x001f]
[ 0.208939] pnp 00:07: [io 0x0022-0x003f]
[ 0.208940] pnp 00:07: [io 0x0044-0x004d]
[ 0.208942] pnp 00:07: [io 0x0050-0x005f]
[ 0.208943] pnp 00:07: [io 0x0062-0x0063]
[ 0.208945] pnp 00:07: [io 0x0065-0x006f]
[ 0.208946] pnp 00:07: [io 0x0072-0x007f]
[ 0.208948] pnp 00:07: [io 0x0080]
[ 0.208949] pnp 00:07: [io 0x0084-0x0086]
[ 0.208951] pnp 00:07: [io 0x0088]
[ 0.208952] pnp 00:07: [io 0x008c-0x008e]
[ 0.208954] pnp 00:07: [io 0x0090-0x009f]
[ 0.208955] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.208957] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.208960] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.208961] pnp 00:07: [io 0x0800-0x087f]
[ 0.208963] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.208964] pnp 00:07: [io 0x0500-0x057f]
[ 0.208966] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.208968] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.208969] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.208971] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.209028] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.209030] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.209032] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.209034] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.209037] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.209039] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.209041] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.209043] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209094] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.209116] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.209154] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.209156] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.209179] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.209211] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.209247] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.209250] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209455] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.209460] pnp 00:0b: [irq 4]
[ 0.209462] pnp 00:0b: [dma 0 disabled]
[ 0.209522] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.209605] pnp 00:0c: [io 0x0060]
[ 0.209607] pnp 00:0c: [io 0x0064]
[ 0.209609] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[ 0.209610] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[ 0.209649] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.209651] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.209654] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209713] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.209750] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.209753] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.209887] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.209889] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.209891] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.209893] pnp 00:0e: [mem 0x00100000-0x7fffffff]
[ 0.209894] pnp 00:0e: [mem 0xe0000000-0xffffffff]
[ 0.209944] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.209947] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.209949] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.209951] system 00:0e: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.209953] system 00:0e: [mem 0xe0000000-0xffffffff] could not be reserved
[ 0.209956] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.210071] pnp: PnP ACPI: found 15 devices
[ 0.210072] ACPI: ACPI bus type pnp unregistered
[ 0.248477] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 05-05] add_size 1000
[ 0.248480] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 05-05] add_size 400000
[ 0.248488] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-04] add_size 200000
[ 0.248495] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03-03] add_size 200000
[ 0.248502] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-02] add_size 200000
[ 0.248512] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
[ 0.248514] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.248517] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.248519] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.248521] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.248525] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
[ 0.248527] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.248530] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.248533] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[ 0.248535] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.248538] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.248540] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
[ 0.248543] pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfe8fffff]
[ 0.248546] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.248549] pci 0000:00:1c.0: PCI bridge to [bus 05-05]
[ 0.248552] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.248555] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
[ 0.248559] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.248564] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.248566] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.248570] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.248573] pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.248578] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.248581] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.248585] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.248588] pci 0000:00:1c.4: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.248593] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.248595] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.248599] pci 0000:00:1c.5: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.248602] pci 0000:00:1c.5: bridge window [mem 0x80800000-0x809fffff 64bit pref]
[ 0.248607] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.248626] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.248648] pci 0000:00:1e.0: setting latency timer to 64
[ 0.248651] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.248653] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.248656] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.248658] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.248660] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.248662] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.248664] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
[ 0.248666] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe8fffff]
[ 0.248668] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xdfffffff 64bit pref]
[ 0.248670] pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
[ 0.248672] pci_bus 0000:05: resource 1 [mem 0x80000000-0x803fffff]
[ 0.248674] pci_bus 0000:05: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[ 0.248676] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.248678] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.248680] pci_bus 0000:04: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.248682] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 0.248683] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.248685] pci_bus 0000:03: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.248687] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
[ 0.248689] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.248691] pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[ 0.248693] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.248695] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.248697] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.248699] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.248701] pci_bus 0000:06: resource 8 [mem 0x80000000-0xdfffffff]
[ 0.248702] pci_bus 0000:06: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.248733] NET: Registered protocol family 2
[ 0.248778] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.248881] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.249128] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.249262] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.249264] TCP: reno registered
[ 0.249266] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.249271] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.249313] NET: Registered protocol family 1
[ 0.249482] pci 0000:01:00.0: Boot video device
[ 0.249501] PCI: CLS 32 bytes, default 64
[ 0.249536] Unpacking initramfs...
[ 0.300861] Freeing initrd memory: 2904k freed
[ 0.301793] apm: BIOS not found.
[ 0.301982] audit: initializing netlink socket (disabled)
[ 0.301994] type=2000 audit(1343559626.299:1): initialized
[ 0.302338] highmem bounce pool size: 64 pages
[ 0.302341] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.303890] VFS: Disk quotas dquot_6.5.2
[ 0.303933] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.304010] msgmni has been set to 1719
[ 0.304303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.304360] io scheduler noop registered
[ 0.304361] io scheduler deadline registered
[ 0.304366] io scheduler cfq registered (default)
[ 0.304470] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.304536] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.304610] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.304685] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.304759] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.304906] intel_idle: does not run on family 6 model 23
[ 0.304923] GHES: HEST is not enabled!
[ 0.304934] isapnp: Scanning for PnP cards...
[ 0.660595] isapnp: No Plug & Play device found
[ 0.660658] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.681141] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.702001] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.702338] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.704811] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.704826] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.704932] mousedev: PS/2 mouse device common for all mice
[ 0.704977] rtc_cmos 00:03: RTC can wake from S4
[ 0.705087] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.705108] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.705131] cpuidle: using governor ladder
[ 0.705132] cpuidle: using governor menu
[ 0.705273] TCP: cubic registered
[ 0.705357] NET: Registered protocol family 10
[ 0.705507] NET: Registered protocol family 17
[ 0.705511] Registering the dns_resolver key type
[ 0.705551] Using IPI No-Shortcut mode
[ 0.705627] PM: Hibernation image not present or could not be loaded.
[ 0.705635] registered taskstats version 1
[ 0.706104] rtc_cmos 00:03: setting system clock to 2012-07-29 11:00:27 UTC (1343559627)
[ 0.706139] Initializing network drop monitor service
[ 0.706220] Freeing unused kernel memory: 524k freed
[ 0.706378] Write protecting the kernel text: 3812k
[ 0.706409] Write protecting the kernel read-only data: 1120k
[ 0.712224] systemd-udevd[50]: starting version 187
[ 0.734511] usbcore: registered new interface driver usbfs
[ 0.734527] usbcore: registered new interface driver hub
[ 0.734597] usbcore: registered new device driver usb
[ 0.735077] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.735108] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.735111] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.735129] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.735148] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.739018] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.739034] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
[ 0.739358] SCSI subsystem initialized
[ 0.740431] libata version 3.00 loaded.
[ 0.741226] ahci 0000:03:00.0: version 3.0
[ 0.741265] ahci 0000:03:00.0: JMB361 has only one port
[ 0.741273] ahci 0000:03:00.0: forcing port_map 0x3 -> 0x1
[ 0.743297] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.746687] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.747281] hub 1-0:1.0: USB hub found
[ 0.747286] hub 1-0:1.0: 6 ports detected
[ 0.747416] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.747420] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.747428] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.747450] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.751348] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.751364] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
[ 0.753538] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode
[ 0.753541] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.754156] scsi0 : ahci
[ 0.754412] scsi1 : ahci
[ 0.754557] ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 0.754559] ata2: DUMMY
[ 0.760029] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.760173] hub 2-0:1.0: USB hub found
[ 0.760176] hub 2-0:1.0: 6 ports detected
[ 0.760287] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.760292] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.760303] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.760331] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
[ 0.760499] hub 3-0:1.0: USB hub found
[ 0.760503] hub 3-0:1.0: 2 ports detected
[ 0.760610] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.760612] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.760620] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.760650] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
[ 0.760807] hub 4-0:1.0: USB hub found
[ 0.760810] hub 4-0:1.0: 2 ports detected
[ 0.760900] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.760902] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.760908] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.760928] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
[ 0.761054] hub 5-0:1.0: USB hub found
[ 0.761057] hub 5-0:1.0: 2 ports detected
[ 0.761136] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.761139] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.761145] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.761164] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
[ 0.761520] hub 6-0:1.0: USB hub found
[ 0.761525] hub 6-0:1.0: 2 ports detected
[ 0.761611] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.761614] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.761624] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.761652] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
[ 0.762016] hub 7-0:1.0: USB hub found
[ 0.762024] hub 7-0:1.0: 2 ports detected
[ 0.762119] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.762122] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.762128] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.762153] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
[ 0.762343] hub 8-0:1.0: USB hub found
[ 0.762346] hub 8-0:1.0: 2 ports detected
[ 0.762450] ata_piix 0000:00:1f.2: version 2.13
[ 0.762467] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.762507] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.763149] scsi2 : ata_piix
[ 0.763255] scsi3 : ata_piix
[ 0.764437] ata3: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
[ 0.764441] ata4: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
[ 0.764463] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.764495] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.764712] scsi4 : ata_piix
[ 0.764793] scsi5 : ata_piix
[ 0.765583] ata5: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.765587] ata6: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.765646] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 1.053355] usb 1-5: new high-speed USB device number 2 using ehci_hcd
[ 1.073378] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.093981] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.104642] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.303351] Refined TSC clocksource calibration: 2833.011 MHz.
[ 1.303356] Switching to clocksource tsc
[ 1.556729] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.556741] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.556931] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.556942] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.570764] ata3.00: ATA-7: WDC WD740ADFD-00NLR5, 21.07QR5, max UDMA/133
[ 1.570768] ata3.00: 145226112 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.571780] ata3.01: ATA-7: Maxtor 6V300F0, VA111900, max UDMA/133
[ 1.571783] ata3.01: 586114704 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.584089] ata3.00: configured for UDMA/133
[ 1.586888] ata4.00: HPA detected: current 312579695, native 312581808
[ 1.586893] ata4.00: ATA-7: WDC WD1600JS-00MHB0, 02.01C03, max UDMA/133
[ 1.586896] ata4.00: 312579695 sectors, multi 16: LBA48
[ 1.587075] ata4.01: ATA-7: Hitachi HDT725032VLA360, V54OA7EA, max UDMA/133
[ 1.587079] ata4.01: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.593554] ata4.00: configured for UDMA/133
[ 1.597791] ata3.01: configured for UDMA/133
[ 1.597910] scsi 2:0:0:0: Direct-Access ATA WDC WD740ADFD-00 21.0 PQ: 0 ANSI: 5
[ 1.598087] scsi 2:0:1:0: Direct-Access ATA Maxtor 6V300F0 VA11 PQ: 0 ANSI: 5
[ 1.606947] ata4.01: configured for UDMA/133
[ 1.607053] scsi 3:0:0:0: Direct-Access ATA WDC WD1600JS-00M 02.0 PQ: 0 ANSI: 5
[ 1.607253] scsi 3:0:1:0: Direct-Access ATA Hitachi HDT72503 V54O PQ: 0 ANSI: 5
[ 1.607628] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.607968] scsi6 : pata_jmicron
[ 1.608246] scsi7 : pata_jmicron
[ 1.608966] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.608969] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.612463] sd 2:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
[ 1.612493] sd 2:0:1:0: [sdb] 586114704 512-byte logical blocks: (300 GB/279 GiB)
[ 1.612514] sd 3:0:0:0: [sdc] 312579695 512-byte logical blocks: (160 GB/149 GiB)
[ 1.612551] sd 2:0:0:0: [sda] Write Protect is off
[ 1.612556] sd 3:0:1:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.612559] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.612564] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.612567] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.612596] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.612599] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.612603] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.612611] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.612624] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.612639] sd 3:0:1:0: [sdd] Write Protect is off
[ 1.612641] sd 3:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.612660] sd 3:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.629729] sdb: sdb1
[ 1.638871] sdd: sdd1
[ 1.639013] sdc: sdc1 sdc2 sdc3
[ 1.639240] sd 3:0:1:0: [sdd] Attached SCSI disk
[ 1.639304] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.645336] sda: sda1 sda2
[ 1.651080] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.651120] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.767173] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max UDMA/33
[ 1.780577] ata7.00: configured for UDMA/33
[ 1.789452] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL13 PQ: 0 ANSI: 5
[ 1.823346] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 1.960093] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.960097] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.960396] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 2.018103] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input0
[ 2.018180] generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.1-1/input0
[ 2.026816] input: Logitech G500 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/input/input1
[ 2.026938] generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.1-1/input1
[ 2.026958] usbcore: registered new interface driver usbhid
[ 2.026959] usbhid: USB HID core driver
[ 2.236679] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[ 2.313441] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 2.318714] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.423066] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[ 2.423132] generic-usb 0003:046D:C317.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input0
[ 2.461742] input: Logitech USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[ 2.461800] generic-usb 0003:046D:C317.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Multimedia Keyboard] on usb-0000:00:1d.1-2/input1
[ 3.650311] systemd-udevd[151]: starting version 187
[ 4.287002] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 4.330449] Linux agpgart interface v0.103
[ 4.391975] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 4.391981] ACPI: Power Button [PWRB]
[ 4.392043] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 4.392046] ACPI: Power Button [PWRF]
[ 4.441963] iTCO_vendor_support: vendor-support=0
[ 4.442648] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 4.442734] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 4.442790] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.497221] ACPI Warning: 0x00000400-0x0000041f SystemIO conflicts with Region \SMRG 1 (20120320/utaddress-251)
[ 4.497226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.749531] microcode: CPU0 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.784993] microcode: CPU1 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.785420] microcode: CPU2 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.785803] microcode: CPU3 sig=0x1067a, pf=0x10, revision=0xa07
[ 4.786231] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 5.219764] Linux media interface: v0.10
[ 5.420067] firewire_ohci 0000:04:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[ 5.593979] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 5.594571] Linux video capture interface: v2.00
[ 5.614093] nvidia: module license 'NVIDIA' taints kernel.
[ 5.614097] Disabling lock debugging due to kernel taint
[ 5.627654] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.627842] NVRM: loading NVIDIA UNIX x86 Kernel Module 302.17 Tue Jun 12 18:37:51 PDT 2012
[ 5.642727] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
[ 5.657583] input: UVC Camera (046d:0809) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input7
[ 5.657664] usbcore: registered new interface driver uvcvideo
[ 5.657665] USB Video Class driver (1.1.1)
[ 5.743117] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.743314] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.743414] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.743496] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.743601] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 5.744250] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 5.748503] hda_intel: Disabling MSI
[ 5.920090] firewire_core 0000:04:00.0: created device fw0: GUID 001e8c0001d58481, S400
[ 6.078944] usbcore: registered new interface driver snd-usb-audio
[ 6.260209] set resolution quirk: cval->res = 384
[ 6.610117] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input14
[ 6.610219] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input15
[ 6.610282] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input16
[ 6.610345] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input17
[ 6.839612] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 6.997988] fuse init (API version 7.18)
[ 7.318862] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
[ 7.319390] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.625490] Adding 8289504k swap on /dev/sdc1. Priority:-1 extents:1 across:8289504k
[ 9.330544] ATL1E 0000:02:00.0: irq 46 for MSI/MSI-X
[ 9.330673] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 9.330749] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.330881] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.190004] eth0: no IPv6 routers present
[ 26.034112] EXT4-fs (sda2): re-mounted. Opts: commit=0
[ 26.035771] EXT4-fs (sdb1): re-mounted. Opts: commit=0 -
I tried sending a smaller picture (about 300 kb) to some of my family members and before it got to them the computer timed out (very quickly, I might add) so it wouldn't send. We have fairly slow internet speed at times and when I was using XP, under tools there was a feature to increase the time so the computer didn't time out as fast. I had it set at about two minutes. I can't seem to find the same feature under tools in Windows8. I'd really like to be able to address this problem. Thanks for your help.
Pat SpelremYou could adjust the mailnews.tcptimeout preference, as explained in the 2nd point in [http://kb.mozillazine.org/Can_not_send_large_attachments this article]. Also, make sure there's no security program scanning outgoing mail attachments.
-
Hello, it is a few weeks that I'm experiencing slow startups. Previously my system was starting up in less than 15 seconds, but now it takes about 30 seconds to start up. I thought that issue will probably go away after a few updates but it still persists. I was wondering if anyone can help me to find the issue.
systemd-analyze && systemd-analyze blame
Startup finished in 229ms (kernel) + 2.694s (initrd) + 25.387s (userspace) = 28.310s
1.186s systemd-vconsole-setup.service
1.010s systemd-logind.service
818ms [email protected]
736ms upower.service
697ms [email protected]
652ms systemd-remount-fs.service
635ms polkit.service
536ms [email protected]
523ms kmod-static-nodes.service
449ms dev-mqueue.mount
434ms sys-kernel-config.mount
434ms sys-kernel-debug.mount
423ms udisks2.service
379ms dev-hugepages.mount
363ms systemd-tmpfiles-setup.service
347ms powermanagement.service
322ms systemd-tmpfiles-setup-dev.service
191ms systemd-udev-trigger.service
164ms systemd-random-seed.service
164ms boot.mount
158ms systemd-sysctl.service
148ms systemd-user-sessions.service
142ms systemd-update-utmp.service
128ms home.mount
113ms systemd-tmpfiles-clean.service
82ms dev-sda9.swap
57ms systemd-udevd.service
43ms systemd-journal-flush.service
43ms alsa-restore.service
systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @25.387s
└─multi-user.target @25.387s
└─systemd-logind.service @24.376s +1.010s
└─basic.target @24.364s
└─timers.target @24.334s
└─systemd-tmpfiles-clean.timer @5.672s
└─sysinit.target @5.672s
└─systemd-update-utmp.service @5.530s +142ms
└─systemd-tmpfiles-setup.service @5.166s +363ms
└─local-fs.target @5.165s
└─home.mount @5.037s +128ms
└─[email protected] @4.487s +536ms
└─dev-sda11.device @4.486s
journalctl -b
-- Logs begin at Thu 2013-05-23 06:56:12 IRDT, end at Thu 2013-10-31 17:01:46 IRST. --
Oct 31 20:14:09 localhost systemd-journal[47]: Runtime journal is using 712.0K (max 197.8M, leaving 296.7M of free 1.9G, current limit 197.8M).
Oct 31 20:14:09 localhost systemd-journal[47]: Runtime journal is using 712.0K (max 197.8M, leaving 296.7M of free 1.9G, current limit 197.8M).
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys cpuset
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys cpu
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys cpuacct
Oct 31 20:14:09 localhost kernel: Linux version 3.11.6-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.1 20130725 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Oct 18 23:22:36 CEST 2013
Oct 31 20:14:09 localhost kernel: Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda10 rw rootfstype=ext4 nmi_watchdog=0 noresume radeon.dpm=1 radeon.audio=0 quiet initrd=../initramfs-linux.img
Oct 31 20:14:09 localhost kernel: e820: BIOS-provided physical RAM map:
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000cff6ffff] usable
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x00000000cff70000-0x00000000cff7dfff] ACPI data
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x00000000cff7e000-0x00000000cffcffff] ACPI NVS
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
Oct 31 20:14:09 localhost kernel: BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
Oct 31 20:14:09 localhost kernel: NX (Execute Disable) protection: active
Oct 31 20:14:09 localhost kernel: SMBIOS 2.5 present.
Oct 31 20:14:09 localhost kernel: DMI: System manufacturer System Product Name/P5Q, BIOS 2209 03/11/2010
Oct 31 20:14:09 localhost kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Oct 31 20:14:09 localhost kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Oct 31 20:14:09 localhost kernel: No AGP bridge found
Oct 31 20:14:09 localhost kernel: e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
Oct 31 20:14:09 localhost kernel: MTRR default type: uncachable
Oct 31 20:14:09 localhost kernel: MTRR fixed ranges enabled:
Oct 31 20:14:09 localhost kernel: 00000-9FFFF write-back
Oct 31 20:14:09 localhost kernel: A0000-BFFFF uncachable
Oct 31 20:14:09 localhost kernel: C0000-DFFFF write-protect
Oct 31 20:14:09 localhost kernel: E0000-EFFFF write-through
Oct 31 20:14:09 localhost kernel: F0000-FFFFF write-protect
Oct 31 20:14:09 localhost kernel: MTRR variable ranges enabled:
Oct 31 20:14:09 localhost kernel: 0 base 000000000 mask F00000000 write-back
Oct 31 20:14:09 localhost kernel: 1 base 100000000 mask FE0000000 write-back
Oct 31 20:14:09 localhost kernel: 2 base 120000000 mask FF0000000 write-back
Oct 31 20:14:09 localhost kernel: 3 base 0D0000000 mask FF0000000 uncachable
Oct 31 20:14:09 localhost kernel: 4 base 0E0000000 mask FE0000000 uncachable
Oct 31 20:14:09 localhost kernel: 5 disabled
Oct 31 20:14:09 localhost kernel: 6 disabled
Oct 31 20:14:09 localhost kernel: 7 disabled
Oct 31 20:14:09 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Oct 31 20:14:09 localhost kernel: e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
Oct 31 20:14:09 localhost kernel: e820: last_pfn = 0xcff70 max_arch_pfn = 0x400000000
Oct 31 20:14:09 localhost kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Oct 31 20:14:09 localhost kernel: Scanning 1 areas for low memory corruption
Oct 31 20:14:09 localhost kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
Oct 31 20:14:09 localhost kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
Oct 31 20:14:09 localhost kernel: [mem 0x00000000-0x000fffff] page 4k
Oct 31 20:14:09 localhost kernel: BRK [0x01b2f000, 0x01b2ffff] PGTABLE
Oct 31 20:14:09 localhost kernel: BRK [0x01b30000, 0x01b30fff] PGTABLE
Oct 31 20:14:09 localhost kernel: BRK [0x01b31000, 0x01b31fff] PGTABLE
Oct 31 20:14:09 localhost kernel: init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
Oct 31 20:14:09 localhost kernel: [mem 0x12fe00000-0x12fffffff] page 2M
Oct 31 20:14:09 localhost kernel: BRK [0x01b32000, 0x01b32fff] PGTABLE
Oct 31 20:14:09 localhost kernel: init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
Oct 31 20:14:09 localhost kernel: [mem 0x12c000000-0x12fdfffff] page 2M
Oct 31 20:14:09 localhost kernel: init_memory_mapping: [mem 0x100000000-0x12bffffff]
Oct 31 20:14:09 localhost kernel: [mem 0x100000000-0x12bffffff] page 2M
Oct 31 20:14:09 localhost kernel: init_memory_mapping: [mem 0x00100000-0xcff6ffff]
Oct 31 20:14:09 localhost kernel: [mem 0x00100000-0x001fffff] page 4k
Oct 31 20:14:09 localhost kernel: [mem 0x00200000-0xcfdfffff] page 2M
Oct 31 20:14:09 localhost kernel: [mem 0xcfe00000-0xcff6ffff] page 4k
Oct 31 20:14:09 localhost kernel: RAMDISK: [mem 0x7f7ce000-0x7fffffff]
Oct 31 20:14:09 localhost kernel: ACPI: RSDP 00000000000faff0 00024 (v02 ACPIAM)
Oct 31 20:14:09 localhost kernel: ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 03001011 MSFT 00000097)
Oct 31 20:14:09 localhost kernel: ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 03001011 MSFT 00000097)
Oct 31 20:14:09 localhost kernel: ACPI: DSDT 00000000cff70440 09720 (v01 A0993 A0993001 00000001 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: FACS 00000000cff7e000 00040
Oct 31 20:14:09 localhost kernel: ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 03001011 MSFT 00000097)
Oct 31 20:14:09 localhost kernel: ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 03001011 MSFT 00000097)
Oct 31 20:14:09 localhost kernel: ACPI: OEMB 00000000cff7e040 00089 (v01 A_M_I_ AMI_OEM 03001011 MSFT 00000097)
Oct 31 20:14:09 localhost kernel: ACPI: HPET 00000000cff79b60 00038 (v01 A_M_I_ OEMHPET 03001011 MSFT 00000097)
Oct 31 20:14:09 localhost kernel: ACPI: OSFR 00000000cff79ba0 000B0 (v01 A_M_I_ OEMOSFR 03001011 MSFT 00000097)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7f040 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Local APIC address 0xfee00000
Oct 31 20:14:09 localhost kernel: No NUMA configuration found
Oct 31 20:14:09 localhost kernel: Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
Oct 31 20:14:09 localhost kernel: Initmem setup node 0 [mem 0x00000000-0x12fffffff]
Oct 31 20:14:09 localhost kernel: NODE_DATA [mem 0x12fff7000-0x12fffbfff]
Oct 31 20:14:09 localhost kernel: [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Oct 31 20:14:09 localhost kernel: Zone ranges:
Oct 31 20:14:09 localhost kernel: DMA [mem 0x00001000-0x00ffffff]
Oct 31 20:14:09 localhost kernel: DMA32 [mem 0x01000000-0xffffffff]
Oct 31 20:14:09 localhost kernel: Normal [mem 0x100000000-0x12fffffff]
Oct 31 20:14:09 localhost kernel: Movable zone start for each node
Oct 31 20:14:09 localhost kernel: Early memory node ranges
Oct 31 20:14:09 localhost kernel: node 0: [mem 0x00001000-0x0009efff]
Oct 31 20:14:09 localhost kernel: node 0: [mem 0x00100000-0xcff6ffff]
Oct 31 20:14:09 localhost kernel: node 0: [mem 0x100000000-0x12fffffff]
Oct 31 20:14:09 localhost kernel: On node 0 totalpages: 1048334
Oct 31 20:14:09 localhost kernel: DMA zone: 64 pages used for memmap
Oct 31 20:14:09 localhost kernel: DMA zone: 21 pages reserved
Oct 31 20:14:09 localhost kernel: DMA zone: 3998 pages, LIFO batch:0
Oct 31 20:14:09 localhost kernel: DMA32 zone: 13246 pages used for memmap
Oct 31 20:14:09 localhost kernel: DMA32 zone: 847728 pages, LIFO batch:31
Oct 31 20:14:09 localhost kernel: Normal zone: 3072 pages used for memmap
Oct 31 20:14:09 localhost kernel: Normal zone: 196608 pages, LIFO batch:31
Oct 31 20:14:09 localhost kernel: ACPI: PM-Timer IO Port: 0x808
Oct 31 20:14:09 localhost kernel: ACPI: Local APIC address 0xfee00000
Oct 31 20:14:09 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Oct 31 20:14:09 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Oct 31 20:14:09 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Oct 31 20:14:09 localhost kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Oct 31 20:14:09 localhost kernel: ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
Oct 31 20:14:09 localhost kernel: IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Oct 31 20:14:09 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 31 20:14:09 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 31 20:14:09 localhost kernel: ACPI: IRQ0 used by override.
Oct 31 20:14:09 localhost kernel: ACPI: IRQ2 used by override.
Oct 31 20:14:09 localhost kernel: ACPI: IRQ9 used by override.
Oct 31 20:14:09 localhost kernel: Using ACPI (MADT) for SMP configuration information
Oct 31 20:14:09 localhost kernel: ACPI: HPET id: 0x8086a301 base: 0xfed00000
Oct 31 20:14:09 localhost kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Oct 31 20:14:09 localhost kernel: nr_irqs_gsi: 40
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0xcff70000-0xcff7dfff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0xcff7e000-0xcffcffff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
Oct 31 20:14:09 localhost kernel: PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
Oct 31 20:14:09 localhost kernel: e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
Oct 31 20:14:09 localhost kernel: Booting paravirtualized kernel on bare hardware
Oct 31 20:14:09 localhost kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
Oct 31 20:14:09 localhost kernel: PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86528 r8192 d24064 u524288
Oct 31 20:14:09 localhost kernel: pcpu-alloc: s86528 r8192 d24064 u524288 alloc=1*2097152
Oct 31 20:14:09 localhost kernel: pcpu-alloc: [0] 0 1 2 3
Oct 31 20:14:09 localhost kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031931
Oct 31 20:14:09 localhost kernel: Policy zone: Normal
Oct 31 20:14:09 localhost kernel: Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda10 rw rootfstype=ext4 nmi_watchdog=0 noresume radeon.dpm=1 radeon.audio=0 quiet initrd=../initramfs-linux.img
Oct 31 20:14:09 localhost kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
Oct 31 20:14:09 localhost kernel: xsave: enabled xstate_bv 0x3, cntxt size 0x240
Oct 31 20:14:09 localhost kernel: Checking aperture...
Oct 31 20:14:09 localhost kernel: No AGP bridge found
Oct 31 20:14:09 localhost kernel: Calgary: detecting Calgary via BIOS EBDA area
Oct 31 20:14:09 localhost kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Oct 31 20:14:09 localhost kernel: Memory: 4041048K/4193336K available (5050K kernel code, 799K rwdata, 1696K rodata, 1140K init, 1288K bss, 152288K reserved)
Oct 31 20:14:09 localhost kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Oct 31 20:14:09 localhost kernel: Preemptible hierarchical RCU implementation.
Oct 31 20:14:09 localhost kernel: RCU dyntick-idle grace-period acceleration is enabled.
Oct 31 20:14:09 localhost kernel: Dump stacks of tasks blocking RCU-preempt GP.
Oct 31 20:14:09 localhost kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
Oct 31 20:14:09 localhost kernel: NR_IRQS:8448 nr_irqs:712 16
Oct 31 20:14:09 localhost kernel: Console: colour VGA+ 80x25
Oct 31 20:14:09 localhost kernel: console [tty0] enabled
Oct 31 20:14:09 localhost kernel: allocated 16777216 bytes of page_cgroup
Oct 31 20:14:09 localhost kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
Oct 31 20:14:09 localhost kernel: hpet clockevent registered
Oct 31 20:14:09 localhost kernel: tsc: Fast TSC calibration using PIT
Oct 31 20:14:09 localhost kernel: tsc: Detected 2833.302 MHz processor
Oct 31 20:14:09 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5668.71 BogoMIPS (lpj=9444340)
Oct 31 20:14:09 localhost kernel: pid_max: default: 32768 minimum: 301
Oct 31 20:14:09 localhost kernel: Security Framework initialized
Oct 31 20:14:09 localhost kernel: AppArmor: AppArmor disabled by boot time parameter
Oct 31 20:14:09 localhost kernel: Yama: becoming mindful.
Oct 31 20:14:09 localhost kernel: Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Oct 31 20:14:09 localhost kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 31 20:14:09 localhost kernel: Mount-cache hash table entries: 256
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys memory
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys devices
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys freezer
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys net_cls
Oct 31 20:14:09 localhost kernel: Initializing cgroup subsys blkio
Oct 31 20:14:09 localhost kernel: CPU: Physical Processor ID: 0
Oct 31 20:14:09 localhost kernel: CPU: Processor Core ID: 0
Oct 31 20:14:09 localhost kernel: mce: CPU supports 6 MCE banks
Oct 31 20:14:09 localhost kernel: CPU0: Thermal monitoring enabled (TM2)
Oct 31 20:14:09 localhost kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Oct 31 20:14:09 localhost kernel: Freeing SMP alternatives memory: 20K (ffffffff819e6000 - ffffffff819eb000)
Oct 31 20:14:09 localhost kernel: ACPI: Core revision 20130517
Oct 31 20:14:09 localhost kernel: ACPI: All ACPI Tables successfully acquired
Oct 31 20:14:09 localhost kernel: ftrace: allocating 20100 entries in 79 pages
Oct 31 20:14:09 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 31 20:14:09 localhost kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz (fam: 06, model: 17, stepping: 0a)
Oct 31 20:14:09 localhost kernel: Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
Oct 31 20:14:09 localhost kernel: ... version: 2
Oct 31 20:14:09 localhost kernel: ... bit width: 40
Oct 31 20:14:09 localhost kernel: ... generic registers: 2
Oct 31 20:14:09 localhost kernel: ... value mask: 000000ffffffffff
Oct 31 20:14:09 localhost kernel: ... max period: 000000007fffffff
Oct 31 20:14:09 localhost kernel: ... fixed-purpose events: 3
Oct 31 20:14:09 localhost kernel: ... event mask: 0000000700000003
Oct 31 20:14:09 localhost kernel: smpboot: Booting Node 0, Processors #1 #2 #3 OK
Oct 31 20:14:09 localhost kernel: Brought up 4 CPUs
Oct 31 20:14:09 localhost kernel: smpboot: Total of 4 processors activated (22675.85 BogoMIPS)
Oct 31 20:14:09 localhost kernel: devtmpfs: initialized
Oct 31 20:14:09 localhost kernel: PM: Registering ACPI NVS region [mem 0xcff7e000-0xcffcffff] (335872 bytes)
Oct 31 20:14:09 localhost kernel: RTC time: 16:44:09, date: 10/31/13
Oct 31 20:14:09 localhost kernel: NET: Registered protocol family 16
Oct 31 20:14:09 localhost kernel: ACPI: bus type PCI registered
Oct 31 20:14:09 localhost kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Oct 31 20:14:09 localhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Oct 31 20:14:09 localhost kernel: PCI: not using MMCONFIG
Oct 31 20:14:09 localhost kernel: PCI: Using configuration type 1 for base access
Oct 31 20:14:09 localhost kernel: bio: create slab <bio-0> at 0
Oct 31 20:14:09 localhost kernel: ACPI: Added _OSI(Module Device)
Oct 31 20:14:09 localhost kernel: ACPI: Added _OSI(Processor Device)
Oct 31 20:14:09 localhost kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Oct 31 20:14:09 localhost kernel: ACPI: Added _OSI(Processor Aggregator Device)
Oct 31 20:14:09 localhost kernel: ACPI: EC: Look up EC in DSDT
Oct 31 20:14:09 localhost kernel: ACPI: Executed 1 blocks of module-level executable AML code
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7e0d0 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 00235 (v01 DpgPmm P001Ist 00000011 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7e9d0 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 004B2 (v01 PmRef P001Cst 00003001 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7e310 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 00235 (v01 DpgPmm P002Ist 00000012 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7ee90 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 00085 (v01 PmRef P002Cst 00003000 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7e550 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 00235 (v01 DpgPmm P003Ist 00000012 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7ef20 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 00085 (v01 PmRef P003Cst 00003000 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7e790 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 00235 (v01 DpgPmm P004Ist 00000012 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: SSDT 00000000cff7efb0 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Dynamic OEM Table Load:
Oct 31 20:14:09 localhost kernel: ACPI: SSDT (null) 00085 (v01 PmRef P004Cst 00003000 INTL 20060113)
Oct 31 20:14:09 localhost kernel: ACPI: Interpreter enabled
Oct 31 20:14:09 localhost kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
Oct 31 20:14:09 localhost kernel: ACPI: (supports S0 S1 S3 S4 S5)
Oct 31 20:14:09 localhost kernel: ACPI: Using IOAPIC for interrupt routing
Oct 31 20:14:09 localhost kernel: PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Oct 31 20:14:09 localhost kernel: PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
Oct 31 20:14:09 localhost kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Oct 31 20:14:09 localhost kernel: ACPI: No dock devices found.
Oct 31 20:14:09 localhost kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Oct 31 20:14:09 localhost kernel: acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Oct 31 20:14:09 localhost kernel: acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
Oct 31 20:14:09 localhost kernel: PCI host bridge to bus 0000:00
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000
Oct 31 20:14:09 localhost kernel: DMAR: Forcing write-buffer flush capability
Oct 31 20:14:09 localhost kernel: DMAR: Disabling IOMMU for graphics on this chipset
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: [8086:2e21] type 01 class 0x060400
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.0: reg 0x20: [io 0xc800-0xc81f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.1: reg 0x20: [io 0xc880-0xc89f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.2: reg 0x20: [io 0xcc00-0xcc1f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.2: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xfe9ffc00-0xfe9fffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
Oct 31 20:14:09 localhost kernel: pci 0000:00:1a.7: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1b.0: [8086:3a3e] type 00 class 0x040300
Oct 31 20:14:09 localhost kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xfe9f8000-0xfe9fbfff 64bit]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.0: reg 0x20: [io 0xc080-0xc09f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.1: reg 0x20: [io 0xc400-0xc41f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.2: reg 0x20: [io 0xc480-0xc49f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xfe9ff800-0xfe9ffbff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
Oct 31 20:14:09 localhost kernel: pci 0000:00:1d.7: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018a
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xfe9ff400-0xfe9ff4ff 64bit]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.5: reg 0x10: [io 0xc000-0xc007]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.5: reg 0x14: [io 0xbc00-0xbc03]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.5: reg 0x18: [io 0xb880-0xb887]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.5: reg 0x1c: [io 0xb800-0xb803]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.5: reg 0x20: [io 0xb480-0xb48f]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.5: reg 0x24: [io 0xb400-0xb40f]
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.0: [1002:9460] type 00 class 0x030000
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.0: reg 0x18: [mem 0xfeae0000-0xfeaeffff 64bit]
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.0: reg 0x30: [mem 0xfeac0000-0xfeadffff pref]
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.0: supports D1 D2
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.1: [1002:aa30] type 00 class 0x040300
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.1: reg 0x10: [mem 0xfeafc000-0xfeafffff 64bit]
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.1: supports D1 D2
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: PCI bridge to [bus 03]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci 0000:02:00.0: [1969:1026] type 00 class 0x020000
Oct 31 20:14:09 localhost kernel: pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
Oct 31 20:14:09 localhost kernel: pci 0000:02:00.0: reg 0x18: [io 0xec00-0xec7f]
Oct 31 20:14:09 localhost kernel: pci 0000:02:00.0: PME# supported from D3hot D3cold
Oct 31 20:14:09 localhost kernel: pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: PCI bridge to [bus 02]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
Oct 31 20:14:09 localhost kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 11 12 14 15)
Oct 31 20:14:09 localhost kernel: ACPI: Enabled 3 GPEs in block 00 to 3F
Oct 31 20:14:09 localhost kernel: ACPI: \_SB_.PCI0: notify handler is installed
Oct 31 20:14:09 localhost kernel: Found 1 acpi root devices
Oct 31 20:14:09 localhost kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
Oct 31 20:14:09 localhost kernel: vgaarb: loaded
Oct 31 20:14:09 localhost kernel: vgaarb: bridge control possible 0000:01:00.0
Oct 31 20:14:09 localhost kernel: PCI: Using ACPI for IRQ routing
Oct 31 20:14:09 localhost kernel: PCI: pci_cache_line_size set to 64 bytes
Oct 31 20:14:09 localhost kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
Oct 31 20:14:09 localhost kernel: e820: reserve RAM buffer [mem 0xcff70000-0xcfffffff]
Oct 31 20:14:09 localhost kernel: NetLabel: Initializing
Oct 31 20:14:09 localhost kernel: NetLabel: domain hash size = 128
Oct 31 20:14:09 localhost kernel: NetLabel: protocols = UNLABELED CIPSOv4
Oct 31 20:14:09 localhost kernel: NetLabel: unlabeled traffic allowed by default
Oct 31 20:14:09 localhost kernel: HPET: 4 timers in total, 0 timers will be used for per-cpu timer
Oct 31 20:14:09 localhost kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
Oct 31 20:14:09 localhost kernel: hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Oct 31 20:14:09 localhost kernel: Switched to clocksource hpet
Oct 31 20:14:09 localhost kernel: pnp: PnP ACPI init
Oct 31 20:14:09 localhost kernel: ACPI: bus type PNP registered
Oct 31 20:14:09 localhost kernel: system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Oct 31 20:14:09 localhost kernel: pnp 00:01: [dma 4]
Oct 31 20:14:09 localhost kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Oct 31 20:14:09 localhost kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Oct 31 20:14:09 localhost kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
Oct 31 20:14:09 localhost kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
Oct 31 20:14:09 localhost kernel: system 00:05: [io 0x0290-0x029f] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 31 20:14:09 localhost kernel: system 00:06: [io 0x04d0-0x04d1] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:06: [io 0x0800-0x087f] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:06: [io 0x0500-0x057f] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:06: [mem 0xfed50000-0xfed8ffff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 31 20:14:09 localhost kernel: pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
Oct 31 20:14:09 localhost kernel: pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
Oct 31 20:14:09 localhost kernel: system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 31 20:14:09 localhost kernel: system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 31 20:14:09 localhost kernel: system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
Oct 31 20:14:09 localhost kernel: system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 31 20:14:09 localhost kernel: system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:0c: [mem 0x00100000-0xcfffffff] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:0c: [mem 0xe0000000-0xffffffff] could not be reserved
Oct 31 20:14:09 localhost kernel: system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Oct 31 20:14:09 localhost kernel: pnp: PnP ACPI: found 13 devices
Oct 31 20:14:09 localhost kernel: ACPI: bus type PNP unregistered
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 400000
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
Oct 31 20:14:09 localhost kernel: pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 400000
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf03fffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0400000-0xf05fffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xfea00000-0xfeafffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: PCI bridge to [bus 03]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf03fffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: PCI bridge to [bus 02]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.5: bridge window [mem 0xf0400000-0xf05fffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
Oct 31 20:14:09 localhost kernel: pci 0000:00:1c.0: enabling device (0106 -> 0107)
Oct 31 20:14:09 localhost kernel: pci 0000:00:1e.0: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf03fffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:03: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:04: resource 8 [mem 0xd0000000-0xdfffffff]
Oct 31 20:14:09 localhost kernel: pci_bus 0000:04: resource 9 [mem 0xf0000000-0xffffffff]
Oct 31 20:14:09 localhost kernel: NET: Registered protocol family 2
Oct 31 20:14:09 localhost kernel: TCP established hash table entries: 32768 (order: 7, 524288 bytes)
Oct 31 20:14:09 localhost kernel: TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
Oct 31 20:14:09 localhost kernel: TCP: Hash tables configured (established 32768 bind 32768)
Oct 31 20:14:09 localhost kernel: TCP: reno registered
Oct 31 20:14:09 localhost kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes)
Oct 31 20:14:09 localhost kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
Oct 31 20:14:09 localhost kernel: NET: Registered protocol family 1
Oct 31 20:14:09 localhost kernel: pci 0000:01:00.0: Boot video device
Oct 31 20:14:09 localhost kernel: PCI: CLS 32 bytes, default 64
Oct 31 20:14:09 localhost kernel: Unpacking initramfs...
Oct 31 20:14:09 localhost kernel: Freeing initrd memory: 8392K (ffff88007f7ce000 - ffff880080000000)
Oct 31 20:14:09 localhost kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct 31 20:14:09 localhost kernel: software IO TLB [mem 0xcbf70000-0xcff70000] (64MB) mapped at [ffff8800cbf70000-ffff8800cff6ffff]
Oct 31 20:14:09 localhost kernel: Scanning for low memory corruption every 60 seconds
Oct 31 20:14:09 localhost kernel: audit: initializing netlink socket (disabled)
Oct 31 20:14:09 localhost kernel: type=2000 audit(1383237849.203:1): initialized
Oct 31 20:14:09 localhost kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 31 20:14:09 localhost kernel: zbud: loaded
Oct 31 20:14:09 localhost kernel: VFS: Disk quotas dquot_6.5.2
Oct 31 20:14:09 localhost kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 31 20:14:09 localhost kernel: msgmni has been set to 7909
Oct 31 20:14:09 localhost kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Oct 31 20:14:09 localhost kernel: io scheduler noop registered
Oct 31 20:14:09 localhost kernel: io scheduler deadline registered
Oct 31 20:14:09 localhost kernel: io scheduler cfq registered (default)
Oct 31 20:14:09 localhost kernel: pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Oct 31 20:14:09 localhost kernel: pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
Oct 31 20:14:09 localhost kernel: pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
Oct 31 20:14:09 localhost kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 31 20:14:09 localhost kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Oct 31 20:14:09 localhost kernel: intel_idle: does not run on family 6 model 23
Oct 31 20:14:09 localhost kernel: GHES: HEST is not enabled!
Oct 31 20:14:09 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Oct 31 20:14:09 localhost kernel: Linux agpgart interface v0.103
Oct 31 20:14:09 localhost kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Oct 31 20:14:09 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 31 20:14:09 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 31 20:14:09 localhost kernel: mousedev: PS/2 mouse device common for all mice
Oct 31 20:14:09 localhost kernel: rtc_cmos 00:02: RTC can wake from S4
Oct 31 20:14:09 localhost kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Oct 31 20:14:09 localhost kernel: rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Oct 31 20:14:09 localhost kernel: cpuidle: using governor ladder
Oct 31 20:14:09 localhost kernel: cpuidle: using governor menu
Oct 31 20:14:09 localhost kernel: drop_monitor: Initializing network drop monitor service
Oct 31 20:14:09 localhost kernel: TCP: cubic registered
Oct 31 20:14:09 localhost kernel: NET: Registered protocol family 10
Oct 31 20:14:09 localhost kernel: NET: Registered protocol family 17
Oct 31 20:14:09 localhost kernel: Key type dns_resolver registered
Oct 31 20:14:09 localhost kernel: registered taskstats version 1
Oct 31 20:14:09 localhost kernel: Magic number: 1:736:743
Oct 31 20:14:09 localhost kernel: rtc_cmos 00:02: setting system clock to 2013-10-31 16:44:09 UTC (1383237849)
Oct 31 20:14:09 localhost kernel: Freeing unused kernel memory: 1140K (ffffffff818c9000 - ffffffff819e6000)
Oct 31 20:14:09 localhost kernel: Write protecting the kernel read-only data: 8192k
Oct 31 20:14:09 localhost kernel: Freeing unused kernel memory: 1084K (ffff8800014f1000 - ffff880001600000)
Oct 31 20:14:09 localhost kernel: Freeing unused kernel memory: 352K (ffff8800017a8000 - ffff880001800000)
Oct 31 20:14:09 localhost systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Oct 31 20:14:09 localhost systemd[1]: Running in initial RAM disk.
Oct 31 20:14:09 localhost systemd[1]: No hostname configured.
Oct 31 20:14:09 localhost systemd[1]: Set hostname to <localhost>.
Oct 31 20:14:09 localhost systemd[1]: Initializing machine ID from random generator.
Oct 31 20:14:09 localhost systemd[1]: Cannot add dependency job for unit local-fs.target, ignoring: Unit local-fs.target failed to load: No such file or directory.
Oct 31 20:14:09 localhost systemd[1]: Cannot add dependency job for unit swap.target, ignoring: Unit swap.target failed to load: No such file or directory.
Oct 31 20:14:09 localhost systemd[1]: Cannot add dependency job for unit timers.target, ignoring: Unit timers.target failed to load: No such file or directory.
Oct 31 20:14:09 localhost systemd[1]: Cannot add dependency job for unit paths.target, ignoring: Unit paths.target failed to load: No such file or directory.
Oct 31 20:14:09 localhost systemd[1]: Cannot add dependency job for unit slices.target, ignoring: Unit slices.target failed to load: No such file or directory.
Oct 31 20:14:09 localhost systemd[1]: Starting -.slice.
Oct 31 20:14:09 localhost systemd[1]: Created slice -.slice.
Oct 31 20:14:09 localhost systemd[1]: Starting system.slice.
Oct 31 20:14:09 localhost systemd[1]: Created slice system.slice.
Oct 31 20:14:09 localhost systemd[1]: Expecting device dev-sda10.device...
Oct 31 20:14:09 localhost systemd[1]: Starting Journal Socket.
Oct 31 20:14:09 localhost systemd[1]: Listening on Journal Socket.
Oct 31 20:14:09 localhost systemd[1]: Starting Create list of required static device nodes for the current kernel...
Oct 31 20:14:09 localhost systemd[1]: Starting Journal Service...
Oct 31 20:14:09 localhost systemd[1]: Started Journal Service.
Oct 31 20:14:09 localhost systemd-udevd[58]: starting version 208
Oct 31 20:14:09 localhost systemd-journal[47]: Journal started
Oct 31 20:14:09 localhost systemd[1]: Starting udev Kernel Socket.
Oct 31 20:14:09 localhost systemd[1]: Listening on udev Kernel Socket.
Oct 31 20:14:09 localhost systemd[1]: Starting udev Control Socket.
Oct 31 20:14:09 localhost systemd[1]: Listening on udev Control Socket.
Oct 31 20:14:09 localhost systemd[1]: Starting Sockets.
Oct 31 20:14:09 localhost systemd[1]: Reached target Sockets.
Oct 31 20:14:09 localhost systemd[1]: Starting udev Coldplug all Devices...
Oct 31 20:14:09 localhost systemd[1]: Started Create list of required static device nodes for the current kernel.
Oct 31 20:14:09 localhost systemd[1]: Starting Create static device nodes in /dev...
Oct 31 20:14:09 localhost systemd[1]: Started Create static device nodes in /dev.
Oct 31 20:14:09 localhost systemd[1]: Starting udev Kernel Device Manager...
Oct 31 20:14:09 localhost systemd[1]: Started udev Kernel Device Manager.
Oct 31 20:14:09 localhost systemd[1]: Started udev Coldplug all Devices.
Oct 31 20:14:09 localhost systemd[1]: Starting System Initialization.
Oct 31 20:14:09 localhost systemd[1]: Reached target System Initialization.
Oct 31 20:14:09 localhost systemd[1]: Starting Basic System.
Oct 31 20:14:09 localhost systemd[1]: Reached target Basic System.
Oct 31 20:14:09 localhost kernel: ACPI: bus type USB registered
Oct 31 20:14:09 localhost kernel: usbcore: registered new interface driver usbfs
Oct 31 20:14:09 localhost kernel: usbcore: registered new interface driver hub
Oct 31 20:14:09 localhost kernel: usbcore: registered new device driver usb
Oct 31 20:14:09 localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 31 20:14:09 localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
Oct 31 20:14:09 localhost kernel: hub 1-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 1-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
Oct 31 20:14:09 localhost kernel: hub 2-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 2-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
Oct 31 20:14:09 localhost kernel: ehci-pci: EHCI PCI platform driver
Oct 31 20:14:09 localhost kernel: hub 3-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 3-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
Oct 31 20:14:09 localhost kernel: hub 4-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 4-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
Oct 31 20:14:09 localhost kernel: [drm] Initialized drm 1.1.0 20060810
Oct 31 20:14:09 localhost kernel: hub 5-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 5-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
Oct 31 20:14:09 localhost kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
Oct 31 20:14:09 localhost kernel: hub 6-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 6-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1a.7: debug port 1
Oct 31 20:14:09 localhost kernel: SCSI subsystem initialized
Oct 31 20:14:09 localhost kernel: ACPI: bus type ATA registered
Oct 31 20:14:09 localhost kernel: [drm] radeon kernel modesetting enabled.
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1a.7: irq 18, io mem 0xfe9ffc00
Oct 31 20:14:09 localhost kernel: libata version 3.00 loaded.
Oct 31 20:14:09 localhost kernel: [drm] initializing kernel modesetting (RV770 0x1002:0x9460 0x1043:0x02B4).
Oct 31 20:14:09 localhost kernel: [drm] register mmio base: 0xFEAE0000
Oct 31 20:14:09 localhost kernel: [drm] register mmio size: 65536
Oct 31 20:14:09 localhost kernel: ATOM BIOS: 9460.11.22.1.5.AS01
Oct 31 20:14:09 localhost kernel: radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
Oct 31 20:14:09 localhost kernel: radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
Oct 31 20:14:09 localhost kernel: [drm] Detected VRAM RAM=1024M, BAR=256M
Oct 31 20:14:09 localhost kernel: [drm] RAM width 256bits DDR
Oct 31 20:14:09 localhost kernel: [TTM] Zone kernel: Available graphics memory: 2026018 kiB
Oct 31 20:14:09 localhost kernel: [TTM] Initializing pool allocator
Oct 31 20:14:09 localhost kernel: [TTM] Initializing DMA pool allocator
Oct 31 20:14:09 localhost kernel: [drm] radeon: 1024M of VRAM memory ready
Oct 31 20:14:09 localhost kernel: [drm] radeon: 512M of GTT memory ready.
Oct 31 20:14:09 localhost kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
Oct 31 20:14:09 localhost kernel: [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
Oct 31 20:14:09 localhost kernel: hub 7-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 7-0:1.0: 6 ports detected
Oct 31 20:14:09 localhost kernel: [drm] Loading RV770 Microcode
Oct 31 20:14:09 localhost kernel: [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
Oct 31 20:14:09 localhost kernel: radeon 0000:01:00.0: WB enabled
Oct 31 20:14:09 localhost kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880127ab8c00
Oct 31 20:14:09 localhost kernel: radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880127ab8c0c
Oct 31 20:14:09 localhost kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 31 20:14:09 localhost kernel: [drm] Driver supports precise vblank timestamp query.
Oct 31 20:14:09 localhost kernel: radeon 0000:01:00.0: irq 43 for MSI/MSI-X
Oct 31 20:14:09 localhost kernel: radeon 0000:01:00.0: radeon: using MSI.
Oct 31 20:14:09 localhost kernel: [drm] radeon: irq initialized.
Oct 31 20:14:09 localhost kernel: hub 1-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 1-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: hub 2-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 2-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: [drm] ring test on 0 succeeded in 1 usecs
Oct 31 20:14:09 localhost kernel: [drm] ring test on 3 succeeded in 1 usecs
Oct 31 20:14:09 localhost kernel: [drm] ib test on ring 0 succeeded in 0 usecs
Oct 31 20:14:09 localhost kernel: [drm] ib test on ring 3 succeeded in 0 usecs
Oct 31 20:14:09 localhost kernel: [drm] Radeon Display Connectors
Oct 31 20:14:09 localhost kernel: [drm] Connector 0:
Oct 31 20:14:09 localhost kernel: [drm] HDMI-A-1
Oct 31 20:14:09 localhost kernel: [drm] HPD2
Oct 31 20:14:09 localhost kernel: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
Oct 31 20:14:09 localhost kernel: [drm] Encoders:
Oct 31 20:14:09 localhost kernel: [drm] DFP1: INTERNAL_UNIPHY
Oct 31 20:14:09 localhost kernel: [drm] Connector 1:
Oct 31 20:14:09 localhost kernel: [drm] VGA-1
Oct 31 20:14:09 localhost kernel: [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
Oct 31 20:14:09 localhost kernel: [drm] Encoders:
Oct 31 20:14:09 localhost kernel: [drm] CRT2: INTERNAL_KLDSCP_DAC2
Oct 31 20:14:09 localhost kernel: [drm] Connector 2:
Oct 31 20:14:09 localhost kernel: [drm] DIN-1
Oct 31 20:14:09 localhost kernel: [drm] Encoders:
Oct 31 20:14:09 localhost kernel: [drm] TV1: INTERNAL_KLDSCP_DAC2
Oct 31 20:14:09 localhost kernel: [drm] Connector 3:
Oct 31 20:14:09 localhost kernel: [drm] DVI-I-1
Oct 31 20:14:09 localhost kernel: [drm] HPD1
Oct 31 20:14:09 localhost kernel: [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
Oct 31 20:14:09 localhost kernel: [drm] Encoders:
Oct 31 20:14:09 localhost kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1
Oct 31 20:14:09 localhost kernel: [drm] DFP2: INTERNAL_KLDSCP_LVTMA
Oct 31 20:14:09 localhost kernel: [drm] Internal thermal controller with fan control
Oct 31 20:14:09 localhost kernel: == power state 0 ==
Oct 31 20:14:09 localhost kernel: ui class: none
Oct 31 20:14:09 localhost kernel: internal class: boot
Oct 31 20:14:09 localhost kernel: caps: video
Oct 31 20:14:09 localhost kernel: uvd vclk: 0 dclk: 0
Oct 31 20:14:09 localhost kernel: power level 0 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: power level 1 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: power level 2 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: status: c r b
Oct 31 20:14:09 localhost kernel: == power state 1 ==
Oct 31 20:14:09 localhost kernel: ui class: performance
Oct 31 20:14:09 localhost kernel: internal class: none
Oct 31 20:14:09 localhost kernel: caps: single_disp video
Oct 31 20:14:09 localhost kernel: uvd vclk: 0 dclk: 0
Oct 31 20:14:09 localhost kernel: power level 0 sclk: 24000 mclk: 97500 vddc: 1053
Oct 31 20:14:09 localhost kernel: power level 1 sclk: 50000 mclk: 97500 vddc: 1183
Oct 31 20:14:09 localhost kernel: power level 2 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: status:
Oct 31 20:14:09 localhost kernel: == power state 2 ==
Oct 31 20:14:09 localhost kernel: ui class: none
Oct 31 20:14:09 localhost kernel: internal class: uvd
Oct 31 20:14:09 localhost kernel: caps: video
Oct 31 20:14:09 localhost kernel: uvd vclk: 53300 dclk: 40000
Oct 31 20:14:09 localhost kernel: power level 0 sclk: 50000 mclk: 97500 vddc: 1183
Oct 31 20:14:09 localhost kernel: power level 1 sclk: 50000 mclk: 97500 vddc: 1183
Oct 31 20:14:09 localhost kernel: power level 2 sclk: 50000 mclk: 97500 vddc: 1183
Oct 31 20:14:09 localhost kernel: status:
Oct 31 20:14:09 localhost kernel: == power state 3 ==
Oct 31 20:14:09 localhost kernel: ui class: performance
Oct 31 20:14:09 localhost kernel: internal class: none
Oct 31 20:14:09 localhost kernel: caps: video
Oct 31 20:14:09 localhost kernel: uvd vclk: 0 dclk: 0
Oct 31 20:14:09 localhost kernel: power level 0 sclk: 24000 mclk: 97500 vddc: 1053
Oct 31 20:14:09 localhost kernel: power level 1 sclk: 50000 mclk: 97500 vddc: 1183
Oct 31 20:14:09 localhost kernel: power level 2 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: status:
Oct 31 20:14:09 localhost kernel: == power state 4 ==
Oct 31 20:14:09 localhost kernel: ui class: none
Oct 31 20:14:09 localhost kernel: internal class: acpi
Oct 31 20:14:09 localhost kernel: caps:
Oct 31 20:14:09 localhost kernel: uvd vclk: 0 dclk: 0
Oct 31 20:14:09 localhost kernel: power level 0 sclk: 24000 mclk: 97500 vddc: 1053
Oct 31 20:14:09 localhost kernel: power level 1 sclk: 24000 mclk: 97500 vddc: 1053
Oct 31 20:14:09 localhost kernel: power level 2 sclk: 24000 mclk: 97500 vddc: 1053
Oct 31 20:14:09 localhost kernel: status:
Oct 31 20:14:09 localhost kernel: switching from power state:
Oct 31 20:14:09 localhost kernel: ui class: none
Oct 31 20:14:09 localhost kernel: internal class: boot
Oct 31 20:14:09 localhost kernel: caps: video
Oct 31 20:14:09 localhost kernel: uvd vclk: 0 dclk: 0
Oct 31 20:14:09 localhost kernel: power level 0 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: power level 1 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: power level 2 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: status: c b
Oct 31 20:14:09 localhost kernel: switching to power state:
Oct 31 20:14:09 localhost kernel: ui class: performance
Oct 31 20:14:09 localhost kernel: internal class: none
Oct 31 20:14:09 localhost kernel: caps: single_disp video
Oct 31 20:14:09 localhost kernel: uvd vclk: 0 dclk: 0
Oct 31 20:14:09 localhost kernel: power level 0 sclk: 24000 mclk: 97500 vddc: 1053
Oct 31 20:14:09 localhost kernel: power level 1 sclk: 50000 mclk: 97500 vddc: 1183
Oct 31 20:14:09 localhost kernel: power level 2 sclk: 85000 mclk: 97500 vddc: 1313
Oct 31 20:14:09 localhost kernel: status: r
Oct 31 20:14:09 localhost kernel: [drm] radeon: dpm initialized
Oct 31 20:14:09 localhost kernel: hub 3-0:1.0: USB hub found
Oct 31 20:14:09 localhost kernel: hub 3-0:1.0: 2 ports detected
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
Oct 31 20:14:09 localhost kernel: ehci-pci 0000:00:1d.7OK, I found a solution for this problem after fiddling with my fstab. Trick is to let Systemd mount partitions when necessary and do its business during boot like explained here in Arch wiki: https://wiki.archlinux.org/index.php/Im … tem_mounts
$ nano /etc/fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
/dev/sda8 /boot ext4 defaults,noatime,noauto,x-systemd.automount 0 2
/dev/sda9 none swap defaults,noauto,x-systemd.automount 0 0
# /dev/sda10 / ext4 defaults,noatime,noauto,x-systemd.automount 0 1
/dev/sda11 /home ext4 defaults,noatime,noauto,x-systemd.automount 0 2
Now my boot time is reduced from 28secs to 9secs without any SSD card or Readahead like software involved:
$ systemd-analyze && systemd-analyze blame
Startup finished in 229ms (kernel) + 2.544s (initrd) + 7.181s (userspace) = 9.954s
2.275s systemd-vconsole-setup.service
743ms systemd-logind.service
559ms dev-mqueue.mount
538ms sys-kernel-config.mount
538ms sys-kernel-debug.mount
536ms powermanagement.service
498ms kmod-static-nodes.service
493ms polkit.service
483ms dev-hugepages.mount
456ms systemd-sysctl.service
402ms systemd-tmpfiles-setup.service
398ms upower.service
379ms udisks2.service
332ms systemd-random-seed.service
269ms systemd-tmpfiles-setup-dev.service
261ms systemd-journal-flush.service
233ms systemd-user-sessions.service
208ms systemd-udev-trigger.service
177ms systemd-udevd.service
156ms [email protected]
113ms [email protected]
52ms systemd-update-utmp.service
47ms systemd-remount-fs.service
38ms home.mount
4ms alsa-restore.service
$ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @7.181s
└─multi-user.target @7.181s
└─systemd-logind.service @6.437s +743ms
└─basic.target @6.436s
└─timers.target @6.434s
└─systemd-tmpfiles-clean.timer @6.434s
└─sysinit.target @2.986s
└─systemd-vconsole-setup.service @711ms +2.275s
└─systemd-journald.socket
└─-.mount
└─system.slice
└─-.slice -
Incredibly slow MacBook, Internal Hard Drive issues...
Good morning everybody! I'm apologize if this post is extremely wordy...
I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
_Brief history:_
Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
_Now for the kicker..._
My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
Conclusion:
I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
Thank you all for your time!
:D
Maybe you are looking for
-
I believe I'm using the latest Firefox. I download it whenever you tell me it's available. I have Windows Vista. This box appears in the desktop area (which MSN seems to have redesigned from the way I had it). This seems like a boarder which hops on
-
How to find a session with high archive logs
Any query, to see which active session is generating high archive logs in oracle 8i &9i and high rbs usage
-
Read Memory with "processmemory"
Hello to All I'm doing a project porting from 32-bit Delphi, Visual C # to a 64-bit in this project I had a procedure called "processmemory" who gave me the exact copy of the contents of a treeview component of an external application in a treeview
-
What is standard authorization object for Personal development P_PLOG
Hi, Recently i got a object in HR and i dont have any experince in HR.Could you guide me how to asssign standard authorisation object for the personal development p_plog? how to see the infotypes and what is the header field in innfotypes?
-
What am I supposed to do for the Up-to-date program?
I read somewhere a couple weeks back that I'm supposed to call Apple support or something to acknowledge that I qualify for the program (I bought my new 2011 13.3" Macbook Pro from Amazon, whom I believe is an authorized retailer, on June 6th), thoug