Slow performance and org.samba.winbindd.plist problem
Hi -
I'm a newbie to the forum -- so please forgive any mis-steps in etiquette.
My machine has been experiencing hanging that gets progressively worse (more frequent, longer hangs) the more I keep working on it. Spinning beach ball, sometimes frozen cursor -- it resolves itself eventually but performance is so bad it is a major impediment. I have run DiskWarrior, repaired permissions over and over -- that seems to help, briefly, but once I do some work in Word and Safari, the problem re-emerges and builds again. During a visit to Genius Bar earlier this week, we wiped the drive, reinstalled OS, and then restored from Time Machine. The issue came back immediately (I should have played around before the restore to confirm that with clean OS install, things worked). EtreCheck report is below. I know that Symantec/Norton is likely a source of the problem but I have to have that particular anti-virus software on my machine to connect to work server :-(
I am thinking my next step is to uninstall and reinstall Norton AntiVirus -- and only use AntiVirus -- avoiding the other components of Norton Security. But I would love some input on that. And I am also wondering if the problem might not be caused by the following?
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist
I've searched for information about what to do when that shows up as an issue but didn't find an answer to that issue specifically.
From what I read in my searches, it seems that having only 2 GB of memory is likely also an issue -- but if that's the case, I don't understand why it hasn't been until now?
Thank you in advance for information/assistance!
Monica
EtreCheck version: 2.0.6 (91)
Report generated October 25, 2014 1:01:12 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.26 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM
BANK 0/DIMM0
1 GB DDR3 1067 MHz ok
BANK 1/DIMM0
1 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
spdisplays_display_connector
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 17:35:44
Disk Information: ℹ️
TOSHIBA MK1655GSXF disk0 : (149.05 GB)
S.M.A.R.T. Status: Verified
- (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 159.70 GB (59.92 GB free)
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Kernel Extensions: ℹ️
/Library/Application Support/Symantec/AntiVirus
[not loaded] com.symantec.kext.SymAPComm (11.1.2f17) Support
/Library/Application Support/Symantec/Daemon/SymDaemon.bundle/Contents/PlugIns/FileSecurity.bundle/C ontents/Resources
[not loaded] com.symantec.kext.filesecurity (1.3.3f65) Support
/Library/Application Support/Symantec/Daemon/SymDaemon.bundle/Contents/PlugIns/SymConfidentialData.b undle/Contents/Resources
[not loaded] com.symantec.kext.confidentialData (1.3f44) Support
/Library/Application Support/Symantec/Daemon/SymDaemon.bundle/Contents/PlugIns/SymFirewall.bundle/Co ntents/Resources
[loaded] com.symantec.kext.fw (1.0.3f5) Support
/System/Library/Extensions
[loaded] com.symantec.kext.internetSecurity (1.3.2f5) Support
[loaded] com.symantec.kext.ips (3.2f8) Support
[loaded] com.symantec.kext.pf (4.1.1f13) Support
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist Support
Launch Agents: ℹ️
[running] com.symantec.uiagent.application.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.symantec.avscandaemon.plist Support
[running] com.symantec.deepsight-extractor.plist Support
[running] com.symantec.diskMountNotify.plist Support
[loaded] com.symantec.MissedTasks.plist Support
[loaded] com.symantec.navapd.plist Support
[loaded] com.symantec.navapdaemonsl.plist Support
[loaded] com.symantec.Sched501-1.plist Support
[loaded] com.symantec.Sched501-2.plist Support
[running] com.symantec.sharedsettings.plist Support
[running] com.symantec.symdaemon.plist Support
[running] com.symantec.symSchedDaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
User Login Items: ℹ️
Canon IJ Network Scanner Selector2 UNKNOWN (missing value)
AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
net.juniper.DSSafariExtensions: Version: (null) Support
AdobePDFViewerNPAPI: Version: 10.1.4 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.4 Support
QuickTime Plugin: Version: 7.6.6
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.7
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.92 Support
Safari Extensions: ℹ️
Zotero Connector for Safari
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
Flash Player Support
Norton\nQuickMenu Support
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
9% Safari
4% WindowServer
1% Microsoft Word
1% Activity Monitor
0% activitymonitord
Top Processes by Memory: ℹ️
129 MB WebProcess
105 MB Microsoft Word
105 MB Safari
88 MB mds
60 MB WindowServer
Virtual Memory Information: ℹ️
389 MB Free RAM
1.03 GB Active RAM
185 MB Inactive RAM
274 MB Wired RAM
479 MB Page-ins
17 MB Page-outs
I'm replying to myself because I think I found the prime culprit behind my system hanging. Although there are clearly multiple problems in my system, it appears that a somewhat hidden feature of Norton Firewall was pushing it over the edge.
A subsequent rerun of EtreCheck showed this:
Top Processes by CPU: ℹ️
49% symdeepsight-extractor
4% WindowServer
3% WebProcess
0% Activity Monitor
0% Microsoft Word
Top Processes by Memory: ℹ️
419 MB WebProcess
148 MB Safari
86 MB Microsoft Word
75 MB WindowServer
71 MB symdeepsight-extractor
I had disabled all of Norton's firewall functions already. But a websearch on symdeepsight-extractor and system problems told me about the following step I hadn't taken. In Norton Firewall, advanced settings, I turned off Norton Deepsight Community Download, and Norton Deepsight Community Submission.
Safari speeded up immediately -- video that wouldn't play earlier played without a hitch -- hanging is (mostly) gone. Hope this info helps someone else even though the subject line is off target!
Monica
Similar Messages
-
Console messages: org.samba.winbindd
1/9/10 10:33:10 AM com.apple.launchd[1] (org.samba.winbindd[12695]) Exited with exit code: 1
1/9/10 10:33:10 AM com.apple.launchd[1] (org.samba.winbindd) Throttling respawn: Will start in 10 seconds
1/9/10 10:33:20 AM com.apple.launchd[1] (org.samba.winbindd[12696]) Exited with exit code: 1
1/9/10 10:33:20 AM com.apple.launchd[1] (org.samba.winbindd) Throttling respawn: Will start in 10 seconds
1/9/10 10:33:30 AM com.apple.launchd[1] (org.samba.winbindd[12697]) Exited with exit code: 1
1/9/10 10:33:30 AM com.apple.launchd[1] (org.samba.winbindd) Throttling respawn: Will start in 10 seconds
I have around 4,000 of those messages in an 18 hour time frame, and they just keep on coming. I'm concerned that they may be causing some stability issues for me.
Anybody know what these are, or how I can get rid of the problem?
The only information I have found indicates that it may be because I am bound to an AD at work. Also, that apparently causes my machine to have an obscenely long reboot/login time when I'm at home.I am actually concerned with my computer's behavior when I log in away from my work network, and that these messages only appear when I'm away from work.
I have noticed some general instability with my computer -- hangs, trackpad and keyboard issues, memory not being freed.
As it stands, I've done a clean install and haven't been back to work yet to set up active directory. So far, everything seems fine. I will probably wait to bind my computer for a couple of days to see if the behavior crops up. -
Org.samba.winbindd logs constant throttling respawn messages in system.log
I am running Mac OS X 10.6.4 on a MacBookPro5,1 (Intel Core 2 Duo) system.
My network connectivity is fine as far as I can tell. I recently discovered the following message being logged over and over in the system.log log file:
7-17-10 11:49:09 o'clock com.apple.launchd[1] (org.samba.winbindd) Throttling respawn: Will start in 10 seconds
7-17-10 11:49:19 o'clock com.apple.launchd[1] (org.samba.winbindd[157]) Exited with exit code: 1
This is really annoying when trying to view the log output to diagnose a problem I with an application I'm trying to develop
What can stop these message from appear in my log output?I checked the Console application and found a log file in it call log.winbindd. It has several entries like the following in it that might be relevant:
[2010/07/17 14:44:14, 1] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbindd.c:main(1024)
winbindd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbinddcache.c:initialize_winbinddcache(2222)
initializewinbinddcache: clearing cache and re-creating with version number 1
[2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbinddutil.c:init_domainlist(505)
Could not fetch our SID - did we join?
[2010/07/17 14:44:14, 0, pid=1964] /SourceCache/samba/samba-235.4/samba/source/nsswitch/winbindd.c:main(1130)
unable to initalize domain list
What insight does this offer into the cause of the messages and how to stop them? -
Dreamweaver CS3 (9) maxed CPU slow performance and FTP issues.
Dreamweaver CS3 (9) maxed CPU slow performance and FTP
issues.
Never mind...I found it.
Of course I have all the firewall, worm, scanning, phishing
filtering, full time protect, and everything else turned off when I
am working on a remote/testing site however I found the Symantec
antivirus email scan being enabled (doesn't it just interact with
my email program?) was getting in the way of DW9 ftp operations,
causing some lagging that was putting DW9 into an unstable mode
during and immediately after (10 seconds) ftp operations.
The CPU still spikes to 99% during ftp functions but DW9
works even though it's likely taxed to the max but when I turn off
email scan DW9 returned to a functioning state during ftp and
remote file view. Whatever it takes huh?
PS: email scanning only never effected DW8.02
My System Info: properly configured (as in: everything works
or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
– 1.5 GB ram – Intel extreme graphics card 64 MB ram
– Apache 2.2 server – PHP 5 – MySQL 5 -
phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
GoLive - Photoshop - ImageReady – Illustrator – Acrobat
– CuteFTP – Putty SSH - blabla...)Thanks for the response. I managed to Google the 'nobody' account and found the explanation.
As you say, I assumed the 'syslogd' process had to do with system logs. I did check the console and couldn't find anything of particular interest in the logs.
I'll continue to monitor but if anyone has any further suggestions please post.
One thing that might also have an impact... my available drive space is now down to less than 5gb (runs anywhere between 1gb and 5gb free depending on what I'm running). I know this causes problems for Parallels as it keeps moaning at me, but would it cause any problems with OSX?
Thanks again,
Tom -
Xorg using 30% cpu when idle,slow performance and video problems
I'm having a problem with Xorg, I don't know what it is but I guess it has something to do with configuration problems because in Ubuntu eerything works out of the box.
My problems are these:
1. Xorg is using arround 30% cpu when the computer is idle and very simple animations in kde like minimize a window are performed very poorly.
2. Compiz' performance is very poor and chopy
3. h264 videos are not wachable. it feels like watching 3fps videos.
as i mentioned above, i don't have any of these problems with ubuntu.
Here's my xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Touchpad" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "record"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "synaptics"
Load "dri"
Load "GLcore"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "AUO"
ModelName "187b"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile GM965/GL960 Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "130"
Option "RightEdge" "840"
Option "TopEdge" "130"
Option "BottomEdge" "640"
Option "FingerLow" "7"
Option "FingerHigh" "8"
Option "MaxTapTime" "180"
Option "MaxTapMove" "110"
Option "EmulateMidButtonTime" "75"
Option "VertScrollDelta" "20"
Option "HorizEdgeScroll" "off"
# Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.25"
Option "MaxSpeed" "0.50"
Option "AccelFactor" "0.010"
Option "EdgeMotionMinSpeed" "200"
Option "EdgeMotionMaxSpeed" "200"
Option "UpDownScrolling" "1"
# Option "CircularScrolling" "1"
# Option "CircScrollDelta" "0.1"
# Option "CircScrollTrigger" "2"
Option "SHMConfig" "on"
Option "Emulate3Buttons" "on"
EndSection
and my hardware (created with hardinfo):
http://files.nergar.com/hardinfo_report.html
thanks in advance, I would like to switch to arch!Experiment with section module. My i945 is
load "dbe"
load "freetype"
subsection "extmod"
option "omit xfree86-dga"
endsubsection
Try to comment busid in section device and add another section device before your existing one
section "device"
identifier "tommy"
vendorname "unknown"
boardname "unknown"
driver "vga"
endsection
Try the drivers i810 and vesa in section device
My file was created by xorgconfig (run this from the console)
Last edited by 11010010110 (2008-07-30 21:22:35) -
Problems with slow finder and com.apple.finder.plist
I have four users in my marketing department, all running Mac Pros with 10.6. and Adobe CS5 and some other software for design work. Each one has a slowness issue using the Finder (by itself and inside programs (ie, within Photoshop and going to Open)) when accessing our network drives. Other people, including myself, can access those same directories without slowness.
'Slowness' is an understatement. What would normally take a second is taking 5 to 10 minutes to show content in folders.
When I delete "com.apple.finder.plist" off their systems, and reboot, everything snaps back to being speedy, but it doesn't last and they need to remove that file once a day.
I have two saved plist files before they deleted it, but I don't know what do look for when I view the contents with a plist editor.
Can anyone offer some suggestions on why this could be happening? Or how can I view and see what this file is being hung up on?Download and run all the cleaning and maintainence aspects of the free OnyX while each machine is offline and reboot, leave offline until all are completed and then put them back online.
See if that clears the issue or reveals some more issues with the checks.
http://www.macupdate.com/app/mac/11582/onyx
OnyX also has a plist checker under Verify. -
Slow performance and display problems
I've already submitted this question, but thought I would change the subject to make it more descriptive:
I just recently installed Acrobat 8 Professional on an older machine that I have. It is running Windows XP Professional SP3, processor 2.4GHz with 512 RAM. It has only MS Office and Acrobat loaded on it.
I can create a PDF document, but when I pull up the Properties menu, the program seems to have a delayed response and also it has garbled text and you can see everything from the document showing through on the menu so you can't read the menu.
Could this be a memory issue or is there something else that I need to check. Thanks.Experiment with section module. My i945 is
load "dbe"
load "freetype"
subsection "extmod"
option "omit xfree86-dga"
endsubsection
Try to comment busid in section device and add another section device before your existing one
section "device"
identifier "tommy"
vendorname "unknown"
boardname "unknown"
driver "vga"
endsection
Try the drivers i810 and vesa in section device
My file was created by xorgconfig (run this from the console)
Last edited by 11010010110 (2008-07-30 21:22:35) -
Slow performance and frequent errors.
I have all three logging options enabled and I've been looking all over the place all day for answers to this weird problem we have with WAWS. Every single web site we have has an abnormally high error 500 rate that is completely unacceptable. Based on
the logs it's something to do with FastCGI but the errors are often vague. Sometimes we'll get a status code of 0x00000000 and FastCGI saying that the it executed successfully. Other times it's 0x80004005, or something else. Our performance is also all over
the place, sometimes our sites will respond pretty snappy, other times it takes at least 4 seconds or more before anything happens. Three of our sites are set at scaled to the Shared level, and we've purchased two ClearDB databases to power the sites.
We've switched between both PHP versions, and edited the web.config files to add extra logging but all we get are errors like "The server encountered an internal error" or something along those lines. Is there something we're doing wrong or is this
typical of WAWS? Our client is launching their site pretty soon and we've been stress testing to give them an answer on how much their site can handle but the error rate is just too darn high. Please advise!?This is not typical. There are ways you can troubleshoot this. See
this blog post for more information.
Jim Cheshire | Microsoft -
http://blogs.adobe.com/aftereffects/2014/06/red-r3d-problems-after-effects-cc-2014-13-0.ht ml
The After Effects team are investigating a bug in After Effects CC 2104 (13.0) where RED (.R3D) files are very slow and the image resolution is poor, about 1/8 sampling.
The following workaround has been reported to solve the problems in some cases:
Save the project.
Choose Edit > Purge > All Memory & Disk Cache.
Please post in this thread about whether or not this workaround helped you.Intentionally cross-linking threads: this issue was first reported in this thread, which has an ongoing discussion:
AE 2014CC RED R3D files support broken - footages looks bad, everything slow.
The thread you are in now is the comment thread for the blog post. Please post in whichever thread makes more sense for you. I am monitoring both. -
Very slow internet and email designated an "Apple" problem by my server
I have had my mac mini for about 15 months and recently it has become unbearably slow especially on the internet. I have DSL and only have one computer. Most of the time I am not able to send emails before it times out.
My provider, AT&T, yesterday did several tests and told me that their services are working fine as is my DSL box. The lights on the box also indicate that it is working fine. During yesterday's test with AT&T they had me go to another website to get the speed of my sending and receiving. Sending was 295.1 kbps and receiving was 373.1 kbps. The tech said this was extremely slow and was puzzled that it was so slow, but gave no help other than that the problem must lie with my mac. I don't know what to do. I am now using the local library's computer in hopes that someone will be able to give me more assistance.
As further information, last week when I first noticed problems I was having trouble shutting down the computer. It would take several times of initiating the shut down process before it would finally shut down. It appeared at that time that a program called "mirroragent" was my problem. It was causing the shut down to be terminated. However, I have been able to get very little information about mirroragent other than it is part of the idisk or .mac programs. I tried stopping all automization of idisk sychronization, but that failed to help.It sounds like you have plenty of free disc space.
The processes by root are important, there are many things that run in the background on the machine even before any user logs in.
You can sort the process list based on CPU usage, to see what is currently active and using up the most CPU power when the computer seems to be running slowly for no reason. Launch and quit an application and watch what happens to the CPU usage, does it go down to low usage when you have quit all other applications, or is something running pegging the CPU meter when you expect the machine to be idle?
Also, there is an internet/network activity panel that should indicate if there is any active upload/download activity on your computer that you might not be aware of.
ClamXav is a free file-scanning virus utility, not sure it can detect and stop an active virus running in your system, but you can scan previously downloaded files and documents to see if it finds anything, it's more of a preventative tool. I kind of doubt that is your problem though.
http://www.clamxav.com/ -
Hi Chaps,
I have Oracle 11g1 server side and am using the Oracle XDK 10.1.0.2.0 for Windows client side with Sun Java JDK 6 (1.6.0_06-b02).
(I couldnt find an XDK for 11g1???)
I have a table in my database that has an XMLType, its a very simple table -
CREATE TABLE hcr_xml_test
RRN VARCHAR(24) PRIMARY KEY,
ClipID VARCHAR2(27),
Lodgement XMLType
XMLTYPE COLUMN Lodgement
STORE AS OBJECT RELATIONAL
ELEMENT "/www.hcrregister.com/RequestServices/Messages/ConditionReportCreateRequest_1.xsd#ConditionReportCreateRequest_1"
Thats all fine, however with the XDK I am trying to construct an XMLType for use with JDBC from a valid org.w3c.dom.Document so that I can insert a row into my table. My code looks like this -
XMLType xml = new XMLType(realCon, doc);
stmt = (OraclePreparedStatement) realCon.prepareStatement(sql);
stmt.setString(1, id.getRRN());
stmt.setString(2, id.getCenteraClipID());
stmt.setObject(3, xml);
stmt.execute();
doc is a org.w3c.dom.Document
realCon is a java.sql.Connection
That code throws a SQLException at the line "stmt.setObject(3, xml);" -
java.sql.SQLException: Fail to convert to internal representation
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:229)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:403)
at oracle.sql.OPAQUE.<init>(OPAQUE.java:85)
at oracle.xdb.XMLType.toDatum(XMLType.java:480)
at oracle.jdbc.driver.OraclePreparedStatement.setORADataInternal(OraclePreparedStatement.java:7437)
at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:8158)
at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:8149)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:229)
at uk.co.landmarkinfo.registers.datawarehouse.tools.oracle.lodgementloader.DocumentProcessor.run(DocumentProcessor.java:232)
Inspecting the exception I can see that the vendorCode is 17059.
If I use "XMLType xml = XMLType.createXML(realCon, doc);" then xml is null instead of throwing a SQLException, so something isnt working here...
However, if I serialize my Document to a String first and give that String to either the XMLType Constructor or XMLType.createXML() then it all works fine -
/////TEMP
Transformer transformer = saxTransformerFactory.newTransformer();
transformer.setOutputProperty("omit-xml-declaration", "no");
transformer.setOutputProperty("indent", "yes");
ByteArrayOutputStream baos = new ByteArrayOutputStream();
transformer.transform(new DOMSource(doc), new StreamResult(baos));
XMLType stringXML = new XMLType(realCon, new String(baos.toByteArray()));
////END TEMP
stmt = (OraclePreparedStatement) realCon.prepareStatement(sql);
stmt.setString(1, id.getRRN());
stmt.setString(2, id.getCenteraClipID());
stmt.setObject(3, stringXML);
stmt.execute();
But why do I need to serialize to a String first??? Looking at the javadoc I dont think I should have to do this. So is there a problem in Oracles XDB handling of Document or have I missed something?Anyone has any idea? Please help!!!
xu -
Cisco RV 120W VERY slow performance and being unreachable
Hello!
I have strange issues with my RV 120W, which I bought after the recommendations from a Cisco/Linksys pre-sales support. I'm using this unit for SOHO environment with two clients (computers) connected and a few mobile clients. Nothing special and nothing complex. I replaced my WRT610N router with this one on behalf of the VPN features, the RV 120W offers.
Before initial setup I upgraded firmware to it's latest (1.0.1.3).
The issues I'm having with this thing are:
- very slow WLAN performance. And I mean - very, very slow. After doing some analysis I'm having a drop from 10Mbit/s to a stable speed of only a few houndrets of kilos per second. Even less. An average, constant speed test show no more than 50-80 kB/s. And I have a 20/20Mbit link.
- very slow WAN - LAN performance. Although not as slow as WLAN, even LAN is somehow slow with an average throughput from WAN to LAN show no more than 15Mbit/s.
- WAN IP address - host cannot be reached. After setting up the router to be able to echo the PING and be remotely managed, I can achive both services JUST for about 20 seconds after the unit reboots. After those 20 seconds, remote management sessions are timed out and the host is unreachable. But If I reboot the router again, I get it to work again - for no more than 20 seconds.
As this is my first (more) professional router, I'm not really sure if I've got my VPN setup correctly. I cannot get it my VPN to work either and I can't tell if these issues are related.
Any help would be appriciated.
ThanksHey Juka,
Sorry your having issues with the rv120w.
I seen that you upgraded the firmware on the rv120w when you got it. I always do a factory reset of the device when upgrading the firmware. I will first backup my configs, factory reset the device, then reload the configs.
Try that since you did do a firmware upgrade to see if the device speeds up for you.
The wireless issues you were describing, I would do a wireless scan using a wireless analysis software like INSSIDER or something like it, that way you can see the wireless channels that are being used and set your router manually to a channel that has no or the least congestion.
Try this and let us know what you get. -
Slow performance and high memory usage
I do website development so I have Firefox, IE, Chrome and Opera, all updated to the most recent versions. However, for as long as I can ever remember, Firefox has always used more system resources.
As an example, I opened up one site in all 4 browsers and here is the memory usage for each one:
Firefox 200,016
Chrome 5,476k
Chrome 33,504k
Chrome 2,008k
Chrome 4,592k
Chrome 6,374k
Chrome 31,320k
Total 83,274k
IE 44,412k
IE 6,104k
Total 50,516k
Opera 70,704k
This Firefox had all add-ons disabled. Yet I still use Firefox as my default browser mainly due to a couple of add-ons that I find very helpful for what I do.
My question is why does Firefox have to be so much of a resource hog? Can't programmers write tighter code that executes faster? It's a great browser but when gaming, I usually use one of the other browsers.
I've included the clipboard from the troubleshooting information so hopefully that will help someone pinpoint a reason for this problem.
All-in-all, good work on the version 8.Have you tried creating a new profile to see if a vanilla profile (with '''no''' add-ons) is also slow for you? One of the things showing in your troubleshooting report is a network printer. A fresh profile without that network printer and with no residual add-on data may be considerably faster.
-
Safari running very slow, freezing and unexpectantly quiting
Please help!!! this started about a week ago and is driving me mad!
I have changed the proxies, turned off extensions and reset safari
Here is the EtreCheck
Hardware Information:
MacBook Air (11-inch, Late 2010)
MacBook Air - model: MacBookAir3,1
1 1.6 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
Startup Items:
AdobeVersionCueCS2 - Path: /Library/StartupItems/AdobeVersionCueCS2
HP IO - Path: /Library/StartupItems/HP IO
HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
HWNetMgr - Path: /Library/StartupItems/HWNetMgr
HWPortDetect - Path: /Library/StartupItems/HWPortDetect
ParallelsDesktopTransporter - Path: /Library/StartupItems/ParallelsDesktopTransporter
ParallelsTransporter - Path: /Library/StartupItems/ParallelsTransporter
Qmaster - Path: /Library/StartupItems/Qmaster
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 2:15:18
Disk Information:
APPLE SSD TS128C disk0 : (113 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) /: 112.68 GB (27 GB free)
USB Information:
SMI Corporation USB DISK 59.95 GB
FILMS (disk1s1) /Volumes/FILMS: 59.95 GB (30.96 GB free)
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.parallels.kext.prl_hypervisor (5.0
com.eltima.ElmediaPlayer.kext (1.58)
com.parallels.kext.prl_hid_hook (5.0
com.parallels.kext.prl_usb_connect (5.0
com.parallels.kext.prl_netbridge (5.0
com.parallels.kext.prl_vnic (5.0
Problem System Launch Daemons:
[failed] com.apple.macbe.regionalBoot.plist
[failed] com.apple.suhelperd.plist
[loaded] de.novamedia.nmnetmgrd.plist
[not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.eltima.ElmediaPlayer.daemon.plist
[loaded] com.parallels.desktop.launchdaemon.plist
Launch Agents:
[loaded] com.hp.devicemonitor.plist
[loaded] com.hp.messagecenter.launcher.plist
[failed] com.parallels.desktop.launch.plist
[not loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.adobe.ARM.c0710a3bbc1f7b43a9487efa35b9142c1acc4fbd27f79fa7f26c3632.plist
User Login Items:
GrowlHelperApp
Safari
System Events
iTunesHelper
uTorrent
Dropbox
HP Scheduler
3rd Party Preference Panes:
Adobe Version Cue CS2
Flash Player
Flip4Mac WMV
MacFUSE
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
CANONiMAGEGATEWAYDL.plugin
CANONiMAGEGATEWAYLI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
RealPlayer Plugin.plugin
Bad Fonts:
None
Top Processes by CPU:
10% Finder
8% EtreCheck
5% syslogd
2% hidd
1% fontd
0% ps
0% WindowServer
0% distnoted
0% WebProcess
0% AdobeReader
Top Processes by Memory:
156 MB WebProcess
61 MB WindowServer
61 MB mds
53 MB Dropbox
41 MB Safari
37 MB AdobeReader
37 MB Finder
37 MB System Preferences
25 MB coreservicesd
25 MB SystemUIServer
Virtual Memory Statistics
2.20 GB Free RAM
970 MB Active RAM
206 MB Inactive RAM
408 MB Wired RAM
327 MB Page-ins
0 B Page-outshave done what you suggested, Its taken me until now to log back in
I did a speed test on my modem from another laptop and it came in at 31mbps on wireless
It's taking me a few minutes to load each page on here, but will load yahoo instantly
kept getting the message;
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /login!input.jspa.
Reason: Error reading from remote server
Apache/2.2.3 (Oracle) DAV/2 mod_ssl/2.2.3 OpenSSL/0.9.8e-fips-rhel5 Server at discussions.apple.com Port 80
this is the updated etrecheck
Hardware Information:
MacBook Air (11-inch, Late 2010)
MacBook Air - model: MacBookAir3,1
1 1.6 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
Mac OS X 10.6.8 (10K549) - Uptime: 0 days 14:5:8
Disk Information:
APPLE SSD TS128C disk0 : (113 GB)
(null) (disk0s1) <not mounted>: 200 MB
Macintosh HD (disk0s2) /: 112.68 GB (26.97 GB free)
USB Information:
SMI Corporation USB DISK 59.95 GB
FILMS (disk1s1) /Volumes/FILMS: 59.95 GB (30.96 GB free)
Apple Inc. FaceTime Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
com.parallels.kext.prl_hypervisor (5.0
com.eltima.ElmediaPlayer.kext (1.58)
com.parallels.kext.prl_hid_hook (5.0
com.parallels.kext.prl_usb_connect (5.0
com.parallels.kext.prl_netbridge (5.0
com.parallels.kext.prl_vnic (5.0
Problem System Launch Daemons:
[failed] com.apple.macbe.regionalBoot.plist
[loaded] de.novamedia.nmnetmgrd.plist
[not loaded] org.samba.winbindd.plist
Problem System Launch Agents:
[failed] com.apple.Kerberos.renew.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[failed] com.apple.third_party_32b_kext_logger.plist
[loaded] com.eltima.ElmediaPlayer.daemon.plist
[loaded] com.parallels.desktop.launchdaemon.plist
Launch Agents:
[loaded] com.hp.devicemonitor.plist
[loaded] com.hp.messagecenter.launcher.plist
[failed] com.parallels.desktop.launch.plist
[not loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.adobe.ARM.c0710a3bbc1f7b43a9487efa35b9142c1acc4fbd27f79fa7f26c3632.plist
User Login Items:
None
3rd Party Preference Panes:
Adobe Version Cue CS2
Flash Player
Flip4Mac WMV
MacFUSE
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
CANONiMAGEGATEWAYDL.plugin
CANONiMAGEGATEWAYLI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
Flip4Mac WMV Plugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
QuickTime Plugin.plugin
Silverlight.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
RealPlayer Plugin.plugin
Bad Fonts:
None
Top Processes by CPU:
6% EtreCheck
5% WindowServer
3% syslogd
2% VLC
1% fontd
0% WebProcess
0% Finder
0% Safari
0% ODSAgent
Top Processes by Memory:
135 MB WebProcess
61 MB VLC
45 MB WindowServer
41 MB Safari
25 MB mds
20 MB Finder
16 MB SystemUIServer
16 MB EtreCheck
12 MB coreservicesd
12 MB prl_disp_service
Virtual Memory Statistics
2.79 GB Free RAM
514 MB Active RAM
212 MB Inactive RAM
257 MB Wired RAM
170 MB Page-ins
0 B Page-outs -
Mac running very slow during and after downloads (even if they are just small docs)
Hi,
I'm getting very frustrated with my MacBook. Whenever I download something, no matter how small the file is, the MacBook really slows down to the point that it is impossible to work on.
Any ideas why or what I can do to fix it would be much appreciated please.
Thank you!Thanks very much for getting back to me, really kind of you. I'd never done a system check before - here are the results:
Problem description:
My MacBook keeps running extremely slowly, to the point of being impossible to use, whenever in the process of downloading files and afterwards - even if it is just a tiny doc. Very frustrating, any help would be great please. Thanks!
EtreCheck version: 2.0.6 (91)
Report generated 29 October 2014 12:40:39 GMT
Hardware Information: ℹ️
MacBook (13-inch, Early 2008) (Verified)
MacBook - model: MacBook4,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
2 GB RAM
BANK 0/DIMM0
1 GB DDR2 SDRAM 667 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 667 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
GMA X3100 - VRAM: 144 MB
Color LCD 1280 x 800
spdisplays_display_connector
System Software: ℹ️
Mac OS X 10.6.8 (10K549) - Uptime: 0:50:12
Disk Information: ℹ️
FUJITSU MHY2160BH disk0 : (149.05 GB)
S.M.A.R.T. Status: Verified
- (disk0s1) <not mounted> : 210 MB
Mac OSX (disk0s2) / [Startup]: 159.70 GB (112.37 GB free)
USB Information: ℹ️
Micron Built-in iSight
Apple Inc. Bluetooth USB Host Controller
Apple Computer Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Problem System Launch Daemons: ℹ️
[not loaded] org.samba.winbindd.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[loaded] com.genieo.completer.update.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
User Login Items: ℹ️
None
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.6.6
Flash Player: Version: 15.0.0.152 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Silverlight: Version: 5.1.30317.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Audio Plug-ins: ℹ️
iSightAudio: Version: 7.6.6
3rd Party Preference Panes: ℹ️
Flash Player Support
Time Machine: ℹ️
Time Machine information requires OS X 10.7 "Lion" or later.
Top Processes by CPU: ℹ️
8% WindowServer
6% iTunes
0% Microsoft Word
0% fontd
0% coreservicesd
Top Processes by Memory: ℹ️
118 MB Safari
84 MB Google Chrome
58 MB Microsoft Word
58 MB iTunes
39 MB mds
Virtual Memory Information: ℹ️
953 MB Free RAM
762 MB Active RAM
92 MB Inactive RAM
340 MB Wired RAM
475 MB Page-ins
1.63 GB Page-outs
Maybe you are looking for
-
BCD_FIELD_OVERFLOW error while assigning value to dynamic work area
Hi guys, I am trying following code --it uses dynamic table concept. LABSTD2 TYPE P DECIMALS 1, LABST_2 TYPE P DECIMALS 1, LABST_12 TYPE P DECIMALS 1, T_ARTMAS-LABST_12 = T_ARTMAS-LABSTD1 + T_ARTMAS-LABSTD2.
-
I was using my MacBook Pro this evening, and the update window came up as it does every so often. I let it start installing the updates. I was running Mozilla Firefox and iTunes at the time, and also another user was open with a few applicatinons run
-
Prevent automatic release of intercompany project
Hi, Currently, when an intercompany project is created from a sales order, it is automatically released. The user does not have a chance to change the project ID due to this behavior. Is there any way to prevent this from happening i.e., the project
-
I am able to log in but am not able to convert files?
I have paid for the subscription but am not getting the option to convert pdf files.
-
Keyword search address change, has no effect.
Long time ago I added Google Maps as a keyword search (maps <address>), which hasn't been working for a while. After a little research, I've found out, that I had to change the URL for the search, the problem is though, that I can't find the bookmark