Slow performance on windows 10

Hi...my notebook model is hp pavilion dv6 notebook pc...my laptop was running just fine when it was running win 7 but when i upgraded it to windows 10 it started to slow down a lot,like when i play any game on it it's like i'm playing in slow motion and when i open a video using windows media player or the new program that came with win 10 it also slows down a lot like each 1 sec is 5 but when i use a different program such as vlc it works just fine....help please should go back to win 7??!

You can find the generic installer for weblogic server 10.0 in [http://edelivery.oracle.com/] under Product Pack=Oracle BEA > BEA WebLogic Media Pack for Linux x86-64.

Similar Messages

  • Poor - slow performance on Windows network

    Since upgrading to Tiger have experienced overall degradation in performance. Am on company's windows network. Have experienced safari alerts indicating "lost network connection". Also have extremely slow FTP (using Fetch 4.5)... transfers at 20 kps compared to 1.5 mbs when plugging in a windows box to where the Mac is connected using same cable.

    It isn't clear exactly what you think is wrong.
    I'm going to make a lot of assumptions.
    Is there a reason you are forwarding all your traffic through the OSX server?
    Usually that kind of network function is off-loaded to the cable modem or the router that connects to the internet.
    You appear to have a switch, and you want it to be a switch not a router, that the Airport Extremes are connected to since they should all be on the same subnet and your wireless network should be on the same subnet.
    The WAN port of each airport extreme is connected to the switch via ethernet cable.
    There is no need to connect any Airport Extreme to any other Airport Extreme via ethernet.  It is on a bridged network so that second port would just be shut down.  OTOH, the reason one of the ports is defined as a WAN port is because the Airport Extreme does not support the spanning tree
    I believe you already have accomplished the following:
      Each airport extreme is configured to "Create a wireless network"
      None of them should have the "allow this network to be extended" box checked.
          NOTE: this box does not exist in Airport Utility 6.3.1.  You should not try to kludge this by using an older Airport Utility.
      All of the Airport Extremes should be configured in bridge mode.
      All remaning configuration options should be exactly the same.
    Your computer (or phone or whatever) will only connect to one of the wireless networks and one Airport Extreme.
    It will not use both the 2.4 and 5GHz networks simultaneously.
    You can tell which wireless network and Access Point you are connected to by using Airport Utility 6.3.  Click on the icons until you find your MAC address or the name of your device, place the cursor over that name.  If the data rate is 450Mb/s you are connected to the 5GHz network.  Also, if the PHY mode is 802.11a/n you are connected to the 5GHz network.  If the data rate is slower or the PHY mode is 802.11b/g/n, then you are connected to the 2.4GHz network.

  • Slow performance in windows after resizing partitions with bootcamp

    Windows XP Pro crashed on my iMac 6.1 intel core 2 duo @ 2.16GHz and 3 GB RAM so I reinstalled Mac OSX Snow Leopard and created 2 equal partitions of 125GB each w/Boot Camp. I formatted both partitions in NTFS instead of the previous configuration of 32GB FATS for Windows and 218GB for Mac OSX. I updated EVERYTHING with the latest updates and service packs (I installed Windows XP Pro with a CD that had Service Pack 2 on it then installed Srvice Pack 3). I need to use Windows for AutoCAD but want the support and reliability of Apple.
    Now the Windows partition is running VERY slow whereas before the crash and changes, I had no performance problems. I don't know what to do.

    Windows XP Pro crashed on my iMac 6.1 intel core 2 duo @ 2.16GHz and 3 GB RAM so I reinstalled Mac OSX Snow Leopard and created 2 equal partitions of 125GB each w/Boot Camp. I formatted both partitions in NTFS instead of the previous configuration of 32GB FATS for Windows and 218GB for Mac OSX. I updated EVERYTHING with the latest updates and service packs (I installed Windows XP Pro with a CD that had Service Pack 2 on it then installed Srvice Pack 3). I need to use Windows for AutoCAD but want the support and reliability of Apple.
    Now the Windows partition is running VERY slow whereas before the crash and changes, I had no performance problems. I don't know what to do.

  • Oracle 10G slow Performance on Windows 2003 Server

    Hi there,
    Looking for a little assistance in locating a bottleneck that's started to hit our system this week. It's really odd because it's been starting around 10am every morning this week.
    today is the worst that I've seen it because it's almost brought the system to a halt.....
    We're running Oracle 10.2.0.1 64b on Windows 2003 Server 64
    The server has 16 processors and 64GB of RAM currently the CPU is sitting at 5% and the RAM usage is at 16.4GB
    It's a blade server with a SAN backend and I'm assuming the latency is coming from the disk but I need to determine this for a fact.
    I've only been a DBA for about a year and I'm stilling learing how to locate and identify issues. According to OEM I'm seeing
    a ton of I/O from the users. So anyways, any help or insight would be much appreciated and a learning experience for me.
    Thank you for your time and asistance.
    SB

    Thank you for the reply!
    We've had finding one FOREVER, I can't resolve it and I've read somewhere to ignore because OEM is false reporting. I'm adjusting DB_Cache now...
    Isn't possible that too much cache could be bad for the system and cause slow downs?
    FINDING 1: 100% impact (29725 seconds)
    Significant virtual memory paging was detected on the host operating system.
       RECOMMENDATION 1: Host Configuration, 100% benefit (29725 seconds)
          ACTION: Host operating system was experiencing significant paging but no
             particular root cause could be detected. Investigate processes that
             do not belong to this instance running on the host that are consuming
             significant amount of virtual memory. Also consider adding more
             physical memory to the host.
       RECOMMENDATION 2: DB Configuration, 100% benefit (29725 seconds)
          ACTION: Consider enabling Automatic Shared Memory Management by setting
             the parameter "sga_target" to control the amount of SGA consumed by
             this instance.
    FINDING 2: 51% impact (15210 seconds)
    The buffer cache was undersized causing significant additional read I/O.
       RECOMMENDATION 1: DB Configuration, 9% benefit (2685 seconds)
          ACTION: Increase the buffer cache size by setting the value of parameter
             "db_cache_size" to 7568 M.
       ADDITIONAL INFORMATION:
          The value of parameter "db_cache_size" was "6912 M" during the analysis
          period.
       SYMPTOMS THAT LED TO THE FINDING:
          SYMPTOM: Wait class "User I/O" was consuming significant database time.
                   (84% impact [25073 seconds])

  • Slow Performance with Windows 7

    I have a user who just moved to a Windows 7 desktop.  Performance of said desktop is adequate.  On a large report that queries the SQL server, it takes a very long time to display the results (10-20 minutes to complete).  Smaller reports seem to run fine.  It did not take this long on Windows XP.  I am by no means a Crystal Reports guy ( I know very little about it).  Just wondering if anyone has experienced this issue or has any suggestions on settings to tweak to optimize performance.  We're using Crystal Reports IX with SQL Server 2005.  Thanks.

    Hello,
    Crystal Reports XI is not supported on Windows 7.
    You can upgrade to CR XI R2 for free and and then upgrade to Service Pack 6 and then it will be supported.
    Use your XI keycode when you install.
    This is the link to get the full build:
    https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
    Then get SP 5 and SP 6:
    https://smpdl.sap-ag.de/~sapidp/012002523100013876392008E/crxir2win_sp5.exe
    https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
    Thank you
    Don

  • 11g r2 Slow performance in windows 2008 R2

    Hi,
    I have installed 2Node RAC on windows 2008 R2 (IBM servers) with IBM SAN storage, everything went well and oracle is working fine but with performance issue.
    its Standard edition and we are using ASM for database storage.
    The problem is with performance, as i know installation take cares of all basic configuration to begin with, or do i need to perform some postinstallation in windows, this is my first installation on windows.
    We are facing performance issue here.
    what exactly i mean is, if i do a logical import on my laptop it finishes in 10 mins but the same import takes more than 20 mins on server. This server will be used for production use in few days, so please i need some help.
    Is there a way to monitor SAN usage in windows not the storage util provided by IBM.
    Thanks,
    Ajay Kumar

    AEzzy wrote:
    Hi Ajay
    Till now you didn't provide any information about how you trace this problem.
    I'll suggest if you take a snapshot before the import then one after you finish the import. after that get an ASH and AWR reports for these two snapshots.
    On the other hand is the two nodes private network on a physical isolated netwrok? or so they share the public network switches?
    Regards
    AminHi,
    I was doing couple of test, the problem is related to interconnect or RAC, if i shutdown one server then all process are fast including impdp. i tried this from both the servers by bringing down the alternative server.
    Initially we had used cross-cable for interconnect, but now we are using a100MBps dedicated switch, just for testing, once this works then we will upgrade the switch to 1GBps or create VLAN in existing.
    But even after having a dedicated 100MBps switch only for interconnect, same problem exists. i have taken Trace during the impdp process.
    trace from dm00 file
    Elapsed times include waiting on following events:
    Event waited on Times Max. Wait Total Waited
    ---------------------------------------- Waited ---------- ------------
    wait for unread message on broadcast channel
    1359 1.01 1056.87
    ges message buffer allocation 511 0.00 0.00
    library cache lock 20 0.00 0.00
    library cache pin 22 0.00 0.00
    rdbms ipc reply 19 0.00 0.00
    enq: PS - contention 181 0.00 0.07
    PX Deq: reap credit 3010 0.00 0.02
    PX Deq: Join ACK 270 0.00 0.39
    PX Deq: Parse Reply 271 2.52 7.16
    PX Deq: Execute Reply 181 0.00 0.03
    reliable message 552 0.12 0.33
    PX Deq: Signal ACK RSG 270 0.01 0.15
    asynch descriptor resize 44 0.00 0.00
    PX Deq: Signal ACK EXT 120 0.04 0.05
    IPC send completion sync 135 0.00 0.00
    PX Deq: Slave Session Stats 270 0.00 0.30
    row cache lock 35 0.00 0.00
    db file sequential read 1 0.51 0.51
    latch: ges resource hash list 3 0.00 0.00
    latch: shared pool 2 0.00 0.00
    90 user SQL statements in session.
    2022 internal SQL statements in session.
    2112 SQL statements in session.
    Trace file: slrhprod1_dm00_5208.trc
    Trace file compatibility: 10.01.00
    Sort options: default
    1 session in tracefile.
    90 user SQL statements in trace file.
    2022 internal SQL statements in trace file.
    2112 SQL statements in trace file.
    45 unique SQL statements in trace file.
    28261 lines in trace file.
    4218 elapsed seconds in trace file.
    Thanks,
    Ajay

  • Windows 7 icons disappear/reappear Green Progress folder bar issues with slow performance. HELP!!!

    Hi there, I hope someone can help me. This all started about a week ago. So I tried a fresh reinstall from my recovery disk. to no avail. Ok I have Home Premium 64bit and it seems my icons in my user folders and subfolders and the actual file icons are
    blank stand ard or missing. after a while they reappear to normal. the green progress bar in the explorer folders always lags and never fully completes. It hangs. Now I see that it takes 30 secs to get a program to open. Currently my control panel screen is
    blank and my connection between my ipod touch 5g and my desktop is very slow at data transfer. I'm going bonkers! The only things I altered was turning off WMM in my router, Installed a software someone gave me (only to find out it was a crack software) deleted
    that first! and used CCleaner to clean my registry

    Hi,
    So a total reinstall didn’t fix the issue?
    We may take a try with the following article to make Windows a better performance.
    Optimize Windows for better performance
    http://windows.microsoft.com/en-hk/windows/optimize-windows-better-performance#optimize-windows-better-performance=windows-7
    Then, please check to see if any new updates available, also the related drivers, make sure they are up-to-date.
    After that, if issue insists, please refer to the following article to run chkdsk command in CMD to check if there are disk issue.
    http://technet.microsoft.com/en-us/library/bb491051.aspx
    Best regards

  • Slow Performance, Windows with My Documents Redirection, path temp

    I've been annoyed by the SLOW performace on Itunes for Windows ever since i purchased my iPhone, i think i know one reason for my slow performance now.
    My Windowx-box is member of a domain (connected to a Windows Small Business server) and for security we use folder-redirection on "My Documents" folder (i.e instead of "C:\%username%\my documents\" we use \\server\%username%\my documents) this is a quite common setup on any businesscomputer using windows.
    Itunes on windows defaults to storing its cache and library in My Documents and in my case its on \\server\ , this hurts performance tremendously since im on a wireless 54g connection.
    I'd like to be able to configure where I want the library stored AND wich HD to put temp-files/cache on...
    If this is something that takes ages to fix I welcome any reghacks or directions or wich file to hex-edit to make a workaround.

    Copy the iTunes folder on the server to you local hard drive.
    Hold Shift and launch iTunes.
    Select *Choose library*.
    Select the *iTunes library.itl* file in the iTunes folder on your local drive.

  • Windows Server 2012 very slow performance executing files

    Hello,
    I am running windows server 2012 as dc with 2 clients connected running win7 pro x64, this is a new setup.
    Whenever i try to open a large file from the client or an application from the client it takes forever to startup or to load. The performance monitor indicates a maximum workload of 15% at all times.
    I have tried all the following potential solutions i found, however none of them seem to do the trick.
    - enable write cache = http://social.technet.microsoft.com/Forums/en-US/a76f6e97-3266-4ba1-ba90-ad5318ec4937/slow-file-sharing-performance-on-windows-server?forum=winservergen
    - change group policy = http://support.microsoft.com/kb/829700/nl
    - change group policy as = http://social.technet.microsoft.com/Forums/en-US/bcb4b580-50ef-4f10-bc9b-16db1bf24804/slow-network-file-execution-on-windows-server-2012?forum=winserverfiles
    Does anyone have any ideas?
    With kind regards

    Hi,
    You could disable SMBv3 on server 2012 to check if the issue related to SMB protocol. 
    How to enable and disable SMBv1, SMBv2, and SMBv3 in Windows Vista, Windows Server 2008, Windows 7, Windows Server 2008 R2, Windows 8, and Windows Server 2012
    http://support.microsoft.com/kb/2696547/en-us
    Warning: We do not recommend that you disable SMBv2 or SMBv3. Disable SMBv2 or SMBv3 only as a temporary troubleshooting measure. Do not leave SMBv2 or SMBv3 disabled.
    Please also refer to the Forum FAQ to troubleshoot the slow performance issue:
    [Forum FAQ] Troubleshooting Network File Copy Slowness
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Server 2012 R2 slow performance over all

    This is a DELL PowerEdge R820 / 256GB RAM / 4TB onboard storage configured as Remote Desktop Services Host /TS... running QuickBooks, MS Office 2010 STD, Symantec EndPoint Protection (basic antivirus installation ONLY)... 1 month old server... SUPER fast,
    super powerfull.... Part of an AD in SBS 2008 Premium... single NIC card 4 ports / 3 ports disabled. single IP... no VLANS... server is able to resolve ANY pc, DNS record with no problems... able to resolve DC by name, able to receive GP, able to update, able
    to do everything that I can think of.... EXCEPT... anything I open, word, excel, QuickBooks, IE.... takes forever to open... after the application is open is fast but to open anything takes 3-4 minutes.... open ticket with Symantec all looks good, created
    lots of exceptions for antivirus/real time scanning, open ticket with QuickBooks: files look good application was removed and reinstalled to be sure all was done correctly... check the binding order for the disabled NIC; the active one is TOP option, no errors
    at all in event viewers for system, application, setup, no errors at all in DELL management tool, no hard drive errors, no controllers errors.... this server is replacing an old dell poweredge 2008 STD with 24GB RAM... the old DELL opens the same applications
    way faster than the new one... same Quicken version; old server opens Quicken in seconds, new one 3-4 minutes..... Real time monitoring NEVER goes above 1% for CPU and 3% for memory utilization.... one more thing... removed antivirus 100% restart... same performance
    without antivirus.....
    Any ideas will be great as of how to troubleshoot the slow performance....
    Thank you!

    Hi,
    As Sam suggested, please check if there any issue occurred in hard drive.
    On current situation, please also refer to following steps and troubleshoot, then check if we can find more
    clues.
    Please check if you have installed all necessary updates for the Windows Server 2012 R2.
    Please
    perform a clean boot to check if there has software conflicts.
    Please use Resource Monitor to troubleshoot and check if we can find some more details.
    Using Resource Monitor to Troubleshoot Windows Performance Issues Part 1
               Using
    Resource Monitor to Troubleshoot Windows Performance Issues Part 2
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Slow performance on a iMac 27" (maybe originated by the HDD)

    Hello,
    Well, I've had my iMac for 10 months now, but have never really paid attention to its performance since it was my first Mac and I was upgrading from a quite old computer, so it obviously proved to be a far superior machine.
    However, I noticed the problem when I started to be more critical with my machine's performance (this triggered by the fact that I bought, some months after, a MacBook Air which flies beyond time and space). Curious about this, I requested a friend to do a benchmark test with Xbench resulting in his machine (another iMac 27” with comparable specs) clearly outperforming mine. Even the Air, with its slower processor and smaller RAM, has a relatively close performance.
    Additionally, I have started to notice how the computer takes a long time to start-up and, after the desktop is “layed out”, it takes a lot of time before the machine becomes “responsive” (I usually try to start Mail and Google Chrome as soon as the pointer pops in!) with the final result that I have to wait in company of the beach ball for quite some seconds (half a minute) and even after the application had started, I can still hear the HDD working it as if there would be no tomorrow! And then, it is slooooow. Funnily enough, “tougher” applications like Photoshop or Illustrator don’t seem to have as many problems, relatively speaking.
    A little bit on the background info: I have two partitions: one for Bootcamp (since I was migrating from Windows, I had some software that I wanted to use there: Matlab and Office, basically, and then some smaller Windows-only programs).
    Derived from the benchmark test, I think I might have isolated the problem to the HDD (not sure though!).
    SO THE QUESTIONS ARE:
    1. How can I verify that the slow performance is due to the HDD being defective/badly configured/etc.?
    2. Has the Windows Bootcamp Partition any effect on my machine’s performance under MacOS? (I would assume not, but you never know!). I have more than 1.3 TB free space left
    3. What kind of corrective measures should I take?
    4. Any other type of advice will be warmly welcome: I will try to do some PRAM and SMC resets but I am not counting on it. I had also ran the disk utilities and there were no permission errors (not so sure what this means, but I’ve read that it is supposed to be good news.)
    5. Any extra info you might need, lemme know!
    Greetz,
    Víctor.
    PS: Sorry for the loooong post. I tried to be thorough!

    1. How can I verify that the slow performance is due to the HDD being defective/badly configured/etc.?
    Run Apple Hardware Test: http://support.apple.com/kb/HT1509
    2. Has the Windows Bootcamp Partition any effect on my machine’s performance under MacOS? (I would assume not, but you never know!). I have more than 1.3 TB free space left
    Probably not but 1.3TB of free space left on the total HD is not enough for OS X, OS X needs a minimum of 10-15% free space! If you mean 1.3TB of Windows space I'd recommend posting that question in the Boot Camp forum.
    3. What kind of corrective measures should I take?
    If the drive is failing per the AHT then it's covered by warranty and will need to be replaced. Remember back up!!!!!!!!!!
    4. Any other type of advice will be warmly welcome: I will try to do some PRAM and SMC resets but I am not counting on it. I had also ran the disk utilities and there were no permission errors (not so sure what this means, but I’ve read that it is supposed to be good news.)
    Can't hurt, make sure you read the instructions carefully and execute the tests exactly as they are described for Intel based iMacs.
    5. Any extra info you might need, lemme know!
    If you no longer have a need for Windows on your iMac I'd recommend removing that partition using Boot Camp Assistant. That may correct your problems.
    I would also recommend checking if System Preferences - Startup Disk and see if your internal HD is highlighted as the Startup Disk.
    In addition I would recommend checking your Login Items (System Preferences - Accounts - Login Items) and delete any applications you don't need launching at Login.

  • Slow performance-CS4, why?

    Hi,
    I have a Q9450 proccessor, Vista 64 bit with 4GB ram. ever since I installed CS4, things are going a bit slow in PPRO, and I don't understand why?
    For example, scrubbing or playback in the timeline have become painfully slow, and sometimes, I see leftovers of the marker, as if I don't have enough memory (it's hard to explain in writing... I hope
    you got it). Overall, all the symptoms shows I don't have enough memory, because of the slow performance, but it doesn't make sense, cause I have 4 GB, and in CS3 it all worked great.
    Any suggetsions?

    worked just great...
    I don't get it.
    I googled a bit and found this thread:
    http://dvxuser.com/V6/showthread.php?t=149929&page=4
    read what Dave Helmly at Adobe had to say (below):
    YES we use all Cores for playback , effects, and rendering for both Mac and Windows.
    I highly recommend switching to Vista 64 if you are a Windows user (Mac guys are OK with 10.5.4 or higher) Vista 64 will allow Production Premium CS4 to run using more than 4GB of Ram (XP/Vista32 Limitation). As with most NLEs, there are several programs running at the same time to give you the NLE experience. CS4 now allows each process to take up to 4Gb of RAM. If you have 16GB of RAM, then 4 processes can take up to 4GB each. This is a HUGE advantage over CS3. What are some examples of processes? DynamicLink, AfterServer, Photoshop Server, Adobe Media Encoder, Titler, Playback, Capture, Importer, and many more. I tell most people to count on buying 8GB minium.
    So maybe I have to add more ram, in order CS4 to run properly...
    Roy

  • Slow performance LR 1.3.1 (Library Module)

    LR 1.2 is running OK on my iMac. A while ago I tried LR 1.3. The upgrade really slowed down performance. Mostly a lag in the sliders and navigation tools in both Library and Develop modules that made it unworkable to me. I changed back to LR 1.2.
    Since I want to import Canon G9 RAW files into LR, I upgraded to LR 1.3.1 recently. Performance of sliders and the navigation tool in the Develop module seems the same as in LR 1.2 (or maybe even a little better). Which means it is OK (workable). It still shows the blur when navigating a 100% zoomed image though. But the navigation tool in the Library module still has the same slow performance as it had in LR 1.3. Unworkable!!! I tried everything: optimizing, new catalog, rendering previews, etc.
    I need the Library module to work smoothly (as in LR 1.2) in order to compare images at 100% zoom. I am afraid I have to go back to LR 1.2 again and find another solution for my Canon G9 RAW files. Most inconvenient. I am very disappointed. Especially, since Adobe showed they CAN get it right with the Develop module in version LR 1.3.1...
    Oh yeah, my system specs:
    iMac 2.16 GHz Intel Core 2 Duo
    3GB 667 Mhz DDR2 SDRAM (2GB + 1GB)
    232,89 GB Harddrive, 113 GB available
    ATI Radeon X1600 128MB
    Mac OS 10.4.11
    Please Adobe, make the Library module run as smoothly as the Develop module in version 1.3.2...

    The preview folder is 2,11 GB big. The .lrcat is 47 MB big.
    I opened a new test catalog. I imported 326 images. After the import I rendered 1:1 previews. It took a long time. Real memory used was between 700-1000MB. Virtual memory used was between 1000-1400MB. When it was done rendering it still keep on using 700MB real memory and 1000MB virtual memory. I had to close LR and restart. Real memory after restart was 75MB real memory and 375 virtual memory.
    But it didn't matter. The lag in the navigation tool of the Library module was still there.
    I noticed that when clicking in the navigation window there was less delay as when I slide the white square in the window (in Library module). In the develop module this seems the other way around. Sliding showed less delay than clicking.
    What's going on here?
    I also have a MacBook. Performance seems much faster than on my iMac overall. After creating a new catalog and rendering 1:1 previews, the lag in the navigation window seems less than before. But it was still there...

  • Slow Performance Weeks after Encryption

    I encrypted my organization's laptops several weeks ago and did not return them to users until after I could tell by device performance that the bulk encrypting task had completed. I have two users that are experiencing extremely slow performance on their systems. When the users are typing anything like a Word document, upon each keystroke they see the Windows 7 "circle" icon at the mouse cursor. This seems to come and go several times over the week, and every few days we are getting a request to resolve the issue but after restarting the behavior may not act up anymore.
    I found a TID suggesting to change HKLM\SOFTWARE\Novell-FDE\Parameters\ThrottleEncryption to a lower level like Idle or BelowNormal. Is there anything else that I should also try? Thanks!

    Yes, but nothing from Novell yet - I will keep pushing them forward and let you know if I get some results.
    -j-
    >>> Jim Koerner<[email protected]> 8.3.2013 15:29 >>>
    Sounds like you have a SR going on this also. Have you heard anything on a
    fix? Mine has been stagnant for a while and I just bumped it to see if
    anything has been figured out or if more info is needed from my side. Hope
    to here something soon. This is a pretty severe problem especially when it
    happens multiple times to a machine.
    Jim Koerner
    Server - ZCM 11.2.2 MU1 and Internal Database on Win2008R2x64
    Client - ZCM 11.2.2 MU1 on Win7SP1x64 and WinXPx32
    "Jouko Oksanen" <Jouko.Oksanen_re@move_efore.fi> wrote in message
    news:513713E9.13C8.00F6.0@move_efore.fi...
    Hi,
    We have had (maybe) similar issues with our FDE setup that FDE policy
    assigned devices tend to loose the policy and start to do disk decryption
    and suddenly get once again the policy back and start to encrypt again. This
    could be found from "ZCM agent, Full disk encryption, about, Agents status,
    Settings, on section "Emergency Recovery Information" you could see events
    'Zone Changed' what according to Novell support meant that the policy was
    "re-initialized / changed" even our policy counter have not changed = policy
    got lost in some phase.
    We are now suspecting that there is some issues with the policy service that
    plays tricks on us.
    -j-
    >>> Jim Koerner<[email protected]> 20.2.2013 19:57
    >>> >>>
    In ZCC on the devices that you are having issues with look at the Emergency
    Recovery tab and see if you have multiple listings in here that corresponds
    to the slowness. If so your devices are decrypting and then re-encrypting.
    Your mention of being asked to reboot leads me to believe that is what is
    happening to you.
    I have had a few SRs going on this one for a while and it got bumped to
    backend but no info in a month or so.
    Jim Koerner
    Server - ZCM 11.2.2 MU1 and Internal Database on Win2008R2x64
    Client - ZCM 11.2.2 MU1 on Win7SP1x64 and WinXPx32
    "marklar23" wrote in message
    news:[email protected]...
    I encrypted my organization's laptops several weeks ago and did not
    return them to users until after I could tell by device performance that
    the bulk encrypting task had completed. I have two users that are
    experiencing extremely slow performance on their systems. When the
    users are typing anything like a Word document, upon each keystroke they
    see the Windows 7 "circle" icon at the mouse cursor. This seems to come
    and go several times over the week, and every few days we are getting a
    request to resolve the issue but after restarting the behavior may not
    act up anymore.
    I found a TID suggesting to change
    HKLM\SOFTWARE\Novell-FDE\Parameters\ThrottleEncryption to a lower level
    like Idle or BelowNormal. Is there anything else that I should also
    try? Thanks!
    marklar23
    marklar23's Profile: http://forums.novell.com/member.php?userid=5123
    View this thread: http://forums.novell.com/showthread.php?t=464262

  • Slow Performance when program was once 100% proficient

    I am working on a 2011 Macbook Pro - OS X version 10.9.5
    For over a year I have been working in Adobe Premiere Elements 11 on this computer with no issues.  Recently the program began running EXTREMELY slow - for example., taking well over an hour to render video that previously would render in only a minute or two.  Went to Apple - thinking it was my MAC - diagnostics on the MAC show the computer itself is fine.
    Purchased Premiere Elements 13 (liked the new features and offerings) and was naively hoping it would fix my slow performance issue. 
    But program is still running horribly slow.
    Any suggestions or similar issues?

    laurabodey
    Premiere Elements 11 or 13 on Mac Computer.
    Which program do you want to troubleshoot first?
    Let us assume Premiere Elements 11....
    1. Edit Menu/Preferences/Scratch Disk
    Where are the Scratch Disk pointing and how much free space is at that location
    Please assure a clean up of any pile ups of any preview files (Adobe Premiere Elements Previews File Folder), conformed audio files (Media Cache Files Folder), and conformed audio (best cleaned out through Edit Menu/Preferences/Media and the Media Cache Database area Clean button.
    2. Download, install, and run the free ccleaner.
    https://www.piriform.com/ccleaner/download?mac
    3. How much installed RAM does you computer have? Are your source media stored on external hard drive (with the appropriate formatting for Mac)?
    4. Does the information in online articles such as the following make any impact on your situation?
    Seven ways to free up drive space | Macworld
    Let us start here and then decide what next.
    I am strictly and Elements Windows user who tries to find common ground between Premiere Elements Windows and Mac to address some of these issue. So, I am
    not all that great on Mac locations. Please help me translate from Windows to Mac if necessary.
    We will be watching for your results.
    ATR

Maybe you are looking for