Slow phone after iOS4 upgrade? Try this...

I upgraded my iPhone 3G recently to iOS4, and experienced the general slowdown that others have reported. I also had problems with photos not displaying correctly. I deleted and reimported the photos, and that solved that problem, but the slowness and "lag" was still there.
I came across this tip in the misc.phone.mobile.iphone newsgroup:
quote
My 3G was quite slow when I first upgraded to iOS4. But I followed some
advice on the Apple Support Forum. A combination of Settings -> General ->
Reset -> Reset All Settings, followed by a full shut down and restart did
wonders to improve the operation.
unquote
I haven't seen the source for this tip before so I wanted to pass it on.
Doing the reset as described above doesn't lose data, just some settings (Home screen, WiFi login key, 4 digit lock code etc.), but it has got rid of the lag when switching the phone on, and restored some of the pre-upgrade speed.
Hope this helps.
Cheers

Well, first you say that your phone is slow.  Then you state that your phone told you to remove unused apps.  Did you read my last post?  From what I've read, most phone performance issues are app related.  You either have too many apps running at once (most likely), have a third party app that is causing a problem (less likely), or there is something actually wrong with your phone (least likely).  As I stated, I noticed that my phone was slower than normal after installing OS6.  I was using OS6 just like OS5, but the difference is that the apps in OS6 seem to want to close differently.  So I had like 8 apps open at once, and that was my problem.
The first statement that you make is so vague that no one is going to be able to help you.  When is your phone slow?  What apps are you running during this time?  Do you have excessive apps open?  Is it slow all of the time or just sometimes?  What non BB apps (third party) are you running?  The 9300 also only has 256meg of ram, so that is going to make your application behavior that much more noticeable.
Try holding the ALT key down while pressing the BACK button (the one just to the right of the track pad) and that will show you which applications are running. You should see a minimum of 5 (home, phone, browser, messages, and messenger). If you see more than this, particularly if there apps open that you aren't using, this is likely a big contributor.  Close those apps and see the difference.  Just for fun, do a battery pull.
The second statement that you made is even more confusing because at no point in time would your phone ever tell you to uninstall something.  At least, not that I can think of.  What do you mean when you say the phone asked you to remove unused apps?

Similar Messages

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • Issue after iOS4 upgrade

    iPhoto no longer recognizes/displays photos on my iPhone that have been saved via mms, email or 3rd party app (i.e. colorsplash) after recent upgrade to iOS4. It does show a photo placeholder and will ultimately import the photo but it will not display the photo. Displaying photos taken with the phone itself does not seem to be an issue.

    Same issue, but it seems to get worse over time. At first it was just the 3rd party camera apps that iPhoto only displayed dotted white outline. And as you said, if you highlight it, iPhoto imports the picture.
    But, it seems to get worse for me. After awhile, even the native camera app gets the same treatment and when you try to import the outlines, you get an error, where iPhoto says the picture format is invalid.
    If you delete the cache --user-->library-->cache-->com.apple.iphoto, it seems to reset things for awhile, allowing you to import the dotted outlines once again.

  • IPod Touch 3rd Gen: Battery Draining very rapidly after iOS4 upgrade.

    Hello All,
    Sorry for the long post:
    I was wondering if others are experiencing this issue as well? I have a 3rd gen ipod touch 64gb.
    Prior to the iOS4 upgrade my battery life was very decent. I would easily go a couple(2) days before requiring a full charge on the device even with modest internet, game and music use. As a rule I keep my back light as low as I can stand to conserve battery unless I'm in direct sunlight and have no choice but to bump it up in order to see.
    After the iOS4 upgrade my battery life has been drasticly reduced. Going even 24 hours without plugging the device in is totally out of the question and in many cases I find myself having to plug the device into my laptop or car pretty much any chance I get in order to have uninterupted use of the device while I'm out and about. Although I've never timed my actual use, my usage habbits have not changed as far as I'm concerned.
    I went so far as to exchanging the device at my local bestbuy as I purchased the blacktie protection plan which grants me an exchange of the device for "any" reason; be it manufaturer defect, accidental breakage, or anything really short of losing it. The replacement was a brand new non refurb ipod which I synced and charged fully upon bringing it home. To my suprise, the battery life is just as bad as the ipod I just turned in. I have yet to downgrade to iOS3 but am considering it if only to see if I suddenly see a great improvement of the battery life.
    If anyone is having the issue or has some suggestions other then downgrading please comment. If this is an "unknown" bug/issue/flaw in iOS4 I'm sure apple would like to know about it and I'm assuming they monitor these forums for reports of these issues.
    Thanks!
    gutset

    You are not alone. Others are having similar problems. See thread:
    http://discussions.apple.com/thread.jspa?threadID=2474499&tstart=0
    You can provide feedback to Apple at:
    http://www.apple.com/feedback/ipodtouch.html

  • My Mab Book Pro has 4gb Memory , i want to upgrade it, since i am seeing my system slow down after i upgraded to OSx MOuntain LIon

    Hi
    After i upgraded to 10.8.2 i am seeing my MAc got slow.
    And my memory is 4gb , if i increase  the memory will the system become faster.
    Can we get it done this in Apple store .OR without upgrading hte memory cna we make this ystem to run faster ?

    vikramkg wrote:
    Hi
    if i increase  the memory will the system become faster.
    No.  Installing RAM doesn't make a computer faster.
    Can we get it done this in Apple store
    Sure, but why pay for that when you can do it yourself.
    without upgrading hte memory cna we make this ystem to run faster ?
    Have you checked activity monitor to see if any apps or processes are takin up a large percentage of the CPU?

  • Slow Broadband after 21CN Upgrade?

    Before my scheduled 21 upgrade my download connection has been rock solid at 8000K for several years.  My whole recent experience with BT has been very disappointing and I hope you can throw some light on a solution.
    So Far:     
    My Equipment:  BT2000 Faceplate, RJ11 to BT Homehub 1010, 1 Extension fitted (No Bell wire Connected). 
    Problem 1. Now resolved.  On the day of my appointment the engineer connected my dial tone and broadband to someone else’s line in the next village.  The fault call centre insisted the fault could only be in my property as the line tested OK and I would have to accept the possible charges.  Despite my requests for them to despatch an engineer to the exchange as it is more than a coincidence that my dial tone disappeared at the same time as my scheduled changeover they insisted I have an appointment.  The fault was cleared in the exchange by the visiting engineer.
    Problem 2.  Now resolved. The engineer did not remove the call divert on my line and I missed my incoming calls for several days as my calls were diverted to a random number.  I tried #21# and this did not work, so I contacted BT again.  They informed me they could not remove the divert because they had not put it on. After investigation #61# managed to remove my divert.  When I asked why it was not removed when my line was fixed I was told that I must have put the divert on myself as it was done by someone with access to my line. The whole point that my line had been connected elsewhere was totally alien to the call centre worker.
    Problem 3.  On going
    After 14 days of Mediocare performance I was connected much slower speed than my old connection and as my profile was 4000k this is only half of my previous performance. (See Below)
    1. Best Effort Test: -provides background information.
    Download Speed
    5959 Kbps
    0 Kbps
    4000 Kbps
    Max Achievable Speed
     Download speed achieved during the test was - 5959 Kbps
     For your connection, the acceptable range of speeds is 1200-4000 Kbps.
     Additional Information:
     Your DSL Connection Rate :4603 Kbps(DOWN-STREAM), 1251 Kbps(UP-STREAM)
     IP Profile for your line is - 4000 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 16.4:29.53:54.07 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
    2. Upstream Test: -provides background information.
    Upload Speed
    873 Kbps
    0 Kbps
    1251 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 873 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 1251 Kbps
    So I call BT again and after I have established that the only changing parameter is the new 21CN upgrade I am promised that a request will be passed to the engineers to increase the profile........  The result is that they just reset my profile, so once again my speed fluctuates for several days from a virtual stop to slow.
    It is now six days since reporting my slow speed problems after receiving several calls from BT to ask me if my speed has improved, I am finally a broken man today. 
    They insist that I have a broadband boost engineer, before I accept this, I ask several questions and failed to get any acceptable answers..
    What is wrong with my broadband?  You have a fault in the property (change the record!!)
    Why cannot you tell me the speed I am connected at.   You cannot WOOSH test me?  We cannot tell, we have to call you
    Can I speak to the engineers?  You cannot Sir
    Can I speak to your Boss?  No, why would you want to do that!
    What have you done in the exchange to fix my fault?  We have changed some things
    Do you thing it is acceptable to still have slow speeds after twenty days?  That's why you need a boost engineer
    What are you going to do differently from all the other people I have spoken to to resolve my issue.  Nothing
    So with no other option I accept that an appointment will have to be made again.  I am offered an appointment in the week, when I explain that I have business appointments and that I need a weekend appointment I am told none is available or would be available.  So I agree to a Monday appointment.  After the call I get a text to say I have an appointment has been made for Thursday!  So I have to call them back and ask for the appointment I have been promised and I am told it's a simple and easy mistake to press the wrong button, it happens quite often!!
    I since read here that it may help to upgrade my homehub, so why have they not sent me a replacement days ago?
    Current Performance:
    1. Best Effort Test: -provides background information.
    Download Speed
    2024 Kbps
    0 Kbps
    2000 Kbps
    Max Achievable Speed
     Download speed achieved during the test was - 2024 Kbps
     For your connection, the acceptable range of speeds is 800-2000 Kbps.
     Additional Information:
     Your DSL Connection Rate :2271 Kbps(DOWN-STREAM), 771 Kbps(UP-STREAM)
     IP Profile for your line is - 2000 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 13.35:23.63:63.06 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
    2. Upstream Test: -provides background information.
    Upload Speed
    592 Kbps
    0 Kbps
    771 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 592 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 771 Kbps
    I know there are more important things going on in this world.  But my work, my ebay, my shopping, my banking, my social sites etc. all require bandwidth and to have it taken away disguised as an upgrade obviously upsets me.  I am shocked at the complete lack of communications, and the inability to listen and understand your customers.  What is the point of a call centre that can do NOTHING outside their script to help!
    Solved!
    Go to Solution.

    Not sure why my profile is still changing and why I was disconnected today, probably the call centre doing another line test. 
    Uptime:
    0 days, 10:24:37
    Modulation:
    G.992.5 annex A
    Bandwidth (Up/Down) [kbps/kbps]:
    803 / 2,523
    Data Transferred (Sent/Received) [MB/MB]:
    322.86 / 348.70
    Output Power (Up/Down) [dBm]:
    12.0 / 0.0
    Line Attenuation (Up/Down) [dB]:
    19.0 / 31.0
    SN Margin (Up/Down) [dB]:
    13.5 / 30.0
    Vendor ID (Local/Remote):
    TMMB / IFTN
    Loss of Framing (Local/Remote):
    0 / 0
    Loss of Signal (Local/Remote):
    1 / 0
    Loss of Power (Local/Remote):
    0 / 0
    Loss of Link (Remote):
    0
    Error Seconds (Local/Remote):
    1 / 0
    FEC Errors (Up/Down):
    0 / 0
    CRC Errors (Up/Down):
    0 / 0
    HEC Errors (Up/Down):
    0 / 0
    Line Profile:
    Fast

  • ITunes connect screen after iOS4 upgrade

    Hello Everyone,
    Only thing that has changed in the last 24 hours is the software on the phone to the new iOS4. It has happened 2x this AM where I will pull my phone out of my pocket and it is displaying the plug into iTunes message, and I am only able to make emergency calls. If you open the little information button on the bottom right hand near the slider bar it shows the IMEI as unknown along with the SIM as unknown. Haven't seen anything online like this for the 3GS as of yet, hopefully I am not the only one. When I get home I am thinking about downgrading the OS. Any thoughts or suggestions are appreciated!
    Thanks
    nick

    I had a similar problem. iPhone found wifi, lost wifi, accepted password, lost password, saw networks, lost networks, displayed network address, lost the address.
    If your iPhone is experiencing intermittent wifi connections try this Trouble Shooting Guide http://support.apple.com/kb/ts1559
    If it turns out you have a hardware problem and you're still under warranty take your phone to the Apple Store and have them fix it. If you're out of warranty you can try the fix I did to get my wifi back http://www.youtube.com/watch?v=l1azZWWkmSg

  • HT5957 my iPhone 4S is disabled after to upgrade it, this morning.

    Hi. my iPhone 4S is disabled after to upgrade it, just this morning. What do I need to do in the computer to restore it.

    randy195 wrote:
    My iphone 4s is disabled (connect to itunes) and i am not sure if i have a recent back up of it and i dont want to restore cus i will lose alot of my stuff so can i wait until the next ios update [ios 7] (sept 20) and if i do will i be able to access my phone without having to restore?
    You can backup to a Mac or PC via iTunes. Just make sure your iTunes Preferences/Devices is checked so it will NOT AUTOMATICALLY backup/sync when a device is connected. Click on your iPhone and Back it up. This will preserve your iPhones "current" content and settings.
    I hope a larger display is in the works.

  • Slower performance after Mavericks upgrade

    My Macbook Pro has been significantly slowed down by my upgrade to Mavericks. (Processor  2.3 GHz Intel Core i7) (Memory  8 GB 1600 MHz DDR3) (Graphics  Intel HD Graphics 4000 1024 MB) I can't watch a 2 minute video without long... long rendering pauses.  I get error messages and find the computer quits and starts again at random moments.  Loading apps is slower.  I am not talented technically and need some layman version of how to use time machine or other backup info to go back to my Mountain Lion IOS or how to fix this deterioration of my computer performance.  I have run the etresoft app to provide more info.  Unfortunately I am very much a novice at problem solving computer issues so if this is above my paygrade please feel free to send me to more competent sources..
    Hardware Information:
              MacBook Pro (Retina, Mid 2012)
              MacBook Pro - model: MacBookPro10,1
              1 2.3 GHz Intel Core i7 CPU: 4 cores
              8 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
              NVIDIA GeForce GT 650M - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              WiFiUtilityStartUp - Path: /System/Library/StartupItems/WiFiUtilityStartUp
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 1:10:23
    Disk Information:
              APPLE SSD SM256E disk0 : (251 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 250.14 GB (146.62 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. FaceTime HD Camera (Built-in)
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.microsoft.office.licensing.helper.plist
    Launch Agents:
    User Launch Agents:
              [failed] com.adobe.ARM.[...].plist
              [failed] com.google.keystone.agent.plist
              [loaded] ws.agile.1PasswordAgent.plist
    User Login Items:
              Backup Engine
              Dropbox
              WirelessUtility
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins:
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              Google Earth Web Plug-in.plugin
    Bad Fonts:
              None
    Time Machine:
              Skip System Files: NO
              Mobile backups: OFF
              Auto backup: NO
              Volumes being backed up:
                        Macintosh HD: Disk size: 250.14 GB Disk used: 103.52 GB
              Destinations:
                        LaCie Disk [Local] (Last used)
                        Total size: 164.68 GB
                        Total number of backups: 1
                        Oldest backup: 2013-02-06 00:39:17 +0000
                        Last backup: 2013-02-06 00:39:17 +0000
                        Size of backup disk: Too small
                                  Backup size 164.68 GB < (Disk used 103.52 GB X 3)
    Top Processes by CPU:
                   3%          WindowServer
                   2%          firefox
                   1%          EtreCheck
                   1%          mds_stores
                   1%          fontd
                   0%          WirelessUtility
                   0%          Mail
                   0%          mds
                   0%          aosnotifyd
    Top Processes by Memory:
              426 MB   firefox
              319 MB   Finder
              246 MB   Mail
              164 MB   DashboardClient
              156 MB   WindowServer
              156 MB   com.apple.IconServicesAgent
              147 MB   Dock
              131 MB   mds_stores
              106 MB   Dropbox
              106 MB   com.apple.WebKit.WebContent
    Virtual Memory Statistics:
              2.31 GB  Free RAM
              4.09 GB  Active RAM
              732 MB   Inactive RAM
              903 MB   Wired RAM
              451 MB   Page-ins
              0 B      Page-outs

    Do you know the reason for using WiFi Utility? It is not part of OS X and may be contributing to the problem.
    Assuming you have no reason to use it:
    Navigate to the following folder by selecting the entire line (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Open:
    /System/Library/StartupItems/
    Find the file WiFiUtilityStartUp and drag it to the Desktop. You will need to authenticate.
    Next: Open System Preferences by selecting it from the  (Apple) menu, then select Users & Groups. Click the lock icon and authenticate, then click your User account. Select the Login Items tab, then select the item WirelessUtility. Delete it with the "–" (minus) button.
    Next: Backup Engine is not part of OS X either, and is unrelated to Time Machine, which you are using. It may have been installed as part of a utility supplied by Seagate or other hard disk manufacturer. Such utilities should not be used on Macs. If you have no reason to use Backup Engine, delete it as well using the "–" button.
    Quit System Preferences, log out, and log in again. Reply with your results.

  • Slow broadband after exchange upgrade

    My exchange (Accrington) was recently upgraded. Prior to the upgrade I was getting approx 5.5Mb.
    I was told that I would need to wait 10 days after the upgrade for re-training of my line.
    After 10 days, my connection had dropped to 1.6Mb, so I called BT and was told that it was because I had a home hub version 1.0 and that it was incompatible with the upgraded exchage.
    New version 2.0 Hub was sent to me and this has now been connected for 5 days. I also took the opportunity to move things arround so the new hub is connected directly to the master socket, there is no extension wiring and no telephone connected. (Master socket has BT broadband accelerator filter fitted)
    I have used BT speedtest and got the stats from my hub. My IP Profile is no where near what it used to be, I would have expected this to rise after 5 days ?
    Any suggestions as to what I should do now ?
    By the way I am 456M from the exchange !
    Line state
    Connected
    Connection time
    0 days, 19:09:33
    Downstream
    2,268 Kbps
    Upstream
    1,184 Kbps
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    28.9 dB / 4.4 dB
    Line attenuation (Down/Up)
    16.0 dB / 7.1 dB
    Output power (Down/Up)
    0.0 dBm / 13.0 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 4294967137
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    0
    1. Best Effort Test: -provides background information.
    Download Speed
    1555 Kbps
    0 Kbps
    2000 Kbps
    Max Achievable Speed
     Download speedachieved during the test was - 1555 Kbps
     For your connection, the acceptable range of speedsis 800-2000 Kbps.
     Additional Information:
     Your DSL Connection Rate :2268 Kbps(DOWN-STREAM), 1183 Kbps(UP-STREAM)
     IP Profile for your line is - 1750 Kbps
    The throughput of Best Efforts (BE) classes achieved during the test is - 9.13:22.36:68.51 (SBE:NBEBE)
    These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
    The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
    2. Upstream Test: -provides background information.
    Upload Speed
    976 Kbps
    0 Kbps
    1183 Kbps
    Max Achievable Speed
    >Upload speed achieved during the test was - 976 Kbps
     Additional Information:
     Upstream Rate IP profile on your line is - 1183 Kbps
    We were unable to identify any performance problem with your service at this time.

    Thanks for the reply.
    I have removed the filter, and I will leave it for a few days to see if I get any improvement.
    The noise margin(down) actually increased slightly after removing it, is this to be expected ?
    Line state
    Connected
    Connection time
    0 days, 0:01:28
    Downstream
    2,268 Kbps
    Upstream
    1,236 Kbps
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    29.1 dB / 6.0 dB
    Line attenuation (Down/Up)
    16.0 dB / 7.0 dB
    Output power (Down/Up)
    0.0 dBm / 12.1 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    0 / 0
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 12
    Error Seconds (Local)
    0

  • Extremly slow BB After 21CN upgrade

    On last wednsday exchange in Dungannon got a 21CN upgrade. I thougt yea  great news finally i'll get more than 9-10 Mbits. I must admit that before upgrade my bb was rock stable no problems at all ofc some minor dissconections occured during a 4 year period but it happens right? But after the Exchange upgrade my broadband is awfully slow it's almost like dial-up connection, i can't even do my work from home or use internet services which i've paid for upfront.
    I've posted on forums recently i was told to leave my hub on 24/7 for few days, and it should solve my problem,since the line need to settle down after the updrade. But it's already 6th day after the upgrade and nothing changed .... well almost nothing ...
    Here are the stats from my hub taken todays morning.
    ADSL line status
    Connection information
    Line state Connected
    Connection time 5 days, 0:47:10
    Downstream 283 Kbps
    Upstream 440 Kbps
    ADSL settings
    VPI/VCI 0/38
    Type PPPoA
    Modulation ITU-T G.992.5
    Latency type Interleaved
    Noise margin (Down/Up) 22.9 dB / 30.3 dB
    Line attenuation (Down/Up) 29.0 dB / 16.1 dB
    Output power (Down/Up) 0.0 dBm / 12.9 dBm
    Loss of Framing (Local) 0
    Loss of Signal (Local) 0
    Loss of Power (Local) 0
    FEC Errors (Down/Up) 208 / 0
    CRC Errors (Down/Up) 0 / 2147480000
    HEC Errors (Down/Up) nil / 0
    Error Seconds (Local) 0
    When i got back from work about 5pm connection went down for a short period of time (i belive i've been resynced or smth like that) and afterwards my stats look like that
    Line state
    Connected
    Connection time
    0 days, 2:11:13
    Downstream
    283 Kbps
    Upstream
    1,108 Kbps
    ADSL settings
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    22.1 dB / 9.0 dB
    Line attenuation (Down/Up)
    29.0 dB / 16.2 dB
    Output power (Down/Up)
    0.0 dBm / 12.9 dBm
    Loss of Framing (Local)
    0
    Loss of Signal (Local)
    0
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    2315 / 4294967264
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    0
    im very happy cuz finally i can send files to my employer faster also uploading stuff for my private use/backup is easier now but what the **bleep** is with downstream speed? i can understand that setting up new exchange equipment can take some time, same goes for stabilization of the line but how long do i need to have to wait till i'll get what i'm paying for?
    P.S excuse my english it's not my native language
    Forgot to add speedtest results
    Solved!
    Go to Solution.

    I know exactly what you mean = probably find most people on the forum know the feeling.  the speed down is very low but as I said BT will not do anything while still in the training period.
    if no change after 10 days training the contact mods for assistance  http://bt.custhelp.com/app/contact_email/c/4951
    just fill out the form
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Performance issues after iOS4 upgrade

    hello everyone,
    I had notices few issues after I upgraded my iPhone 3GS:
    1- The screen is not rotating (when reading e-mails of flipping photoes).
    2- The resolustion has decreased big time after the upgrade. Now the photos are shown in less resolution and they look hazy.
    3- my Ipod is not working.
    4- I could not restore my device via the itune.
    my big question is there a real tangible benifit for this new upgrade?
    I really appreciate if you can help me soon
    thanks.

    There are a number of bugs 12600557, 12675485, 12669814, 12698488 logged in for 11.1.2.1 - If you use Internet Explorer 8 and have data forms designed to use a large number of sparse dimension members in rows or columns, you may experience performance degradation when opening the data forms.
    This has been fixed in Oracle Hyperion Planning, Fusion Edition Release 11.1.2.1 Patch Set Update (PSU): 11.1.2.1.101 which is available on My Oracle Support as Patch 12666861.
    HTH-
    Jasmine.

  • Slower download after network upgrade

    Hi,
    I received an email from BT stating the following:
    Good news. We’re rolling out our faster broadband and we’ll be upgrading our network in your area on 06-Aug-10. This’ll make the things you do online quicker.
    Before the upgrade I was achieving a connection speed of approx. 7000/448 kbps. A few days after the upgrade I did see a brief improvement of around 7700/872 kbps. However for the last week or so I seem to be firmly planted at 5463/782 kbps.
    Is there anything I should do to improve this?
    Here are the results of the btspeedtest and some ADSL stats:
    ADSL stats :
    Channel: FAST, Upstream rate = 872 Kbps, Downstream rate = 5463 Kbps
    Link Power State: L0
    Mode:            ADSL2+
    Channel:        Fast
    Trellis:        U=ON /D=ON
    Line Status:        No Defect
    Training Status:    Showtime
            Down        Up
    SNR (dB):    10.1        5.3
    Attn(dB):    45.5        26.4
    Pwr(dBm):    19.4        12.0
    Max(Kbps):    6716        18139
    Rate (Kbps):    5463        872
                G.dmt framing
    K:        171(0)        110
    R:        0        0
    S:        1        1
    D:        1        1
                ADSL2 framing
    MSGc:        59        14
    B:        170        109
    M:        1        1
    T:        1        1
    R:        0        0
    S:        0.9956        4.0000
    L:        1374        220
    D:        1        1
                Counters
    SF:        7416483        5999664
    SFErr(CRCErr):    587        59609
    RS:        0        0
    RSCorr:        0        35663718
    RSUnCorr:    0        0
    HEC:        360        45423
    OCD:        14        0
    LCD:        0        0
    Total Cells:    1546256718        2057573243
    Data Cells:    9248151        49573372
    Drop Cells:    0
    Bit Errors:    0        3682051
    ES:        628        1353847
    SES:        1        129716
    UAS:        42        1353754
    AS(Uptime):    119993
    INP:        0.00        0.00
    PER:        16.17        20.00
    delay:        0.24        1.00
    OR:        32.14        8.00
    Bitswap:    11472        33
    Total uptime:    260452
    Total time = 1 days 22 min 1 sec
    SF  = 7416483
    CRC = 587
    LOS = 1
    LOF = 9
    ES  = 628
    Thanks for your time.

    Hi there Yvon,
    Thanks for the post and welcome to the forum.
    Not sure what is going on here without running a few checks from my end.  Can you please drop me an email to [email protected], include your BT account details and the link to this post.  I will find out what is going on with your connection.
    Cheer
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • MacBook Slow/Crashes after Lion Upgrade

    MacBook (13-inch, Aluminum, Late 2008) runs slow, crashes after update to Lion. Ran fine before. Now it crashes when it goes to sleep with screen saver running, sometimes takes multiple force-restarts to boot and seems to run out of RAM (menu bar disapears or a second when switching apps, lots of spinning beach balls). Can't run more than two CS4 apps at once.Aboiut 45 GB free on the 250 GB drive. Any ideas?

    The "do not enter" sign is saying that you're computer cannot locate a hard drive to boot from. Turn on the machine with the option key down. See if the computer give you an option to select a hard drive. If it doesn't select it and it should boot from the selected hard drive. If it doesn't see any bootable hard drive, it usually means your hard drive is dead. In that case, go get a replacement and hopefully you backed everything up.

  • Can't open mail attachments after ios4 upgrade!

    I can't open any attatchments, spreadsheets, schedules, etc... Which worked fine before ios4 upgrade. Can anybody help?

    I don't think zip file is supported.
    Quick Look supports the following document types:
    .doc, .docx—Microsoft Word
    .htm, .html—webpage
    .key—Keynote
    .numbers—Numbers
    .pages—Pages
    .pdf—Preview, Adobe Acrobat
    .ppt, .pptx—Microsoft PowerPoint
    .rtf—Rich Text Format
    .txt—text
    .vcf—contact information
    .xls, .xlsx—Microsoft Excel

Maybe you are looking for