Slow phone after upgrade to OS6

Hello pls help,I upgraded my curve 3g to OS6 but I notice that most times my phonne gets slowed down.It has asked me to remove all unused apps. I did just that,and I even removed the languages am not using too.pls help

Well, first you say that your phone is slow.  Then you state that your phone told you to remove unused apps.  Did you read my last post?  From what I've read, most phone performance issues are app related.  You either have too many apps running at once (most likely), have a third party app that is causing a problem (less likely), or there is something actually wrong with your phone (least likely).  As I stated, I noticed that my phone was slower than normal after installing OS6.  I was using OS6 just like OS5, but the difference is that the apps in OS6 seem to want to close differently.  So I had like 8 apps open at once, and that was my problem.
The first statement that you make is so vague that no one is going to be able to help you.  When is your phone slow?  What apps are you running during this time?  Do you have excessive apps open?  Is it slow all of the time or just sometimes?  What non BB apps (third party) are you running?  The 9300 also only has 256meg of ram, so that is going to make your application behavior that much more noticeable.
Try holding the ALT key down while pressing the BACK button (the one just to the right of the track pad) and that will show you which applications are running. You should see a minimum of 5 (home, phone, browser, messages, and messenger). If you see more than this, particularly if there apps open that you aren't using, this is likely a big contributor.  Close those apps and see the difference.  Just for fun, do a battery pull.
The second statement that you made is even more confusing because at no point in time would your phone ever tell you to uninstall something.  At least, not that I can think of.  What do you mean when you say the phone asked you to remove unused apps?

Similar Messages

  • Macbook pro slow internet after upgrade osx mountain lion

    Slow safari after upgrade to osx moutain lion.

    Have you reset Safari? Yet?  Top left corner of the screen next to the apple logo click on the word Safari, then click reset safari, make sure everything is checked then click reset.  Also try:
    Repair your permissions.  Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box.  Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen.  Wait for it to complete, then see if this fixes the issue.

  • Slow responses after upgrade to lion

    slow reponses after upgrading to Lion

    Slower with Lion-----Same story as Texas Cats above.
    Lion is killing me and my attention span was erratic to begin with...now I can't get anything accomplished.
    Replaced my 80 GB hard drive with a new 160 GB HD and it did nothing!
    I was told by Apple Genius Bar that more memory might be the answer but my mid-2007 MacBook is not supposed to be capable of handling more than the 2GB I have installed.
    Idid the clean-up, cache cleaning, photo removal, etc. Just trying to access simple searches on Google or Safari via Verizon Fios can be excrutiating. So far I have spent $400. on upgrades, etc. and wondering if Lion should be uninstalled?

  • Personal hotspot not on phone after upgrading to 4.3

    the personal hotspot is not on my phone after upgrading to 4.2.7

    Did you go into settings, general, network and then set up personal hotspot?

  • Failed to received any SMS after upgrade to OS6

    Hi there, I wish somebody could help me on this, since I've been calling CELCOM few times already, but the problem still there. 
    3 days ago, i just upgrade my 9700 to OS6. Before upgrade, for SMS I've been use 3rd party apps : CRUNCHsms, After upgrade, seem like i received a few SMS since the notification at my BB screen showed it. But I cannot open the sms because it been said there that CRUNCHsms can't operate in OS6. So, i just removed the apps.
    The issue here is, my phone still can't received any SMS even after i removed the CRUNCHsms apps. I've tried to send test sms to my own number and few of my friends, and what happen is, my friend can receive the sms from me, but my own phone cannot receive any sms. I tried to take out the simcard and put it to another phone, and It can work normally which is no problem with send-receive sms.
    - I can't received any sms but i can send sms, after i upgrade my bold 9700 to OS6.
    I really wish that somebody can help me to solve this issue, since it has been 3 days i can't received any sms. 
    thank you
    Solved!
    Go to Solution.

    Hello,
    Have you checked your security settings? Crunch SMS automatically switches on your firewall to make sure it routes the SMS messages the correct way.
    Go to Options>Security>Firewall and disable it, also make sure there are no ticks next to Text messages, PIN etc...
    Then pull your battery out and it should resolve your issue
    Hope this helps
    Adam
    EE Blackberry Specialist

  • Macbook Air Mid-2013 slows down after upgrading to Yosemite

    Dear support community,
    After upgrading my computer to Yosemite, it started performing much slower than usual. Some of the interactions are sluggish, sometimes switching tabs on Chrome will stop the music for a few miliseconds, etc.
    Here's my EtreCheck report in case you can spot the problem here. Thank you so much for your help!
    EtreCheck version: 2.0.11 (98)
    Report generated November 15, 2014 at 6:15:22 PM GMT+2
    Hardware Information: ℹ️
      MacBook Air (Verified)
      MacBook Air - model: MacBookAir6,2
      1 1.7 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Not upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n/ac
    Video Information: ℹ️
      Intel HD Graphics 5000 -
      Color LCD 1440 x 900
      Thunderbolt Display 2560 x 1440
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 18 days 1:18:22
    Disk Information: ℹ️
      APPLE SSD SM0512F disk0 : (500.28 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 499.05 GB (24.75 GB free)
      Core Storage: disk0s2 499.42 GB Online
    USB Information: ℹ️
      Apple Internal Memory Card Reader
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. iPhone
      Apple Inc. Display Audio
      Apple Inc. Apple Thunderbolt Display
      Apple Inc. FaceTime HD Camera (Display)
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
      Apple Inc. Thunderbolt Display
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.11) Support
      [not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.11) Support
      [not loaded] com.caiaq.driver.NIUSBMaschineControllerDriver (2.3.3) Support
      [not loaded] com.driver.JRDMassStorageDriver64 (1.0.0) Support
      [not loaded] com.driver.JRDMassStorageDriverType05 (1.0.0) Support
      [not loaded] com.driver.JRDUSBModemData32 (1.0.1) Support
      [not loaded] com.driver.JRDUSBModemData64 (4.0.8) Support
    Startup Items: ℹ️
      MySQLCOM: Path: /Library/StartupItems/MySQLCOM
      Startup items are obsolete and will not work in future versions of OS X
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.lookupd.plist
      [failed] com.apple.Maps.pushdaemon.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.sbd.plist
      [failed] com.apple.security.cloudkeychainproxy.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AirPlayXPCHelper.plist
      [failed] com.apple.AssetCacheLocatorService.plist
      [failed] com.apple.awdd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.GSSCred.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.periodic-monthly.plist
      [failed] com.apple.periodic-weekly.plist
      [failed] com.apple.spindump.plist
      [failed] com.apple.systemstats.analysis.plist
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
      [invalid?] cn.com.zte.usbswapper.plist Support
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [loaded] com.google.keystone.agent.plist Support
      [not loaded] com.teamviewer.teamviewer.plist Support
      [running] com.teamviewer.teamviewer_desktop.plist Support
    Launch Daemons: ℹ️
      [running] cn.com.zte.PPPMonitor.plist Support
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.adobe.SwitchBoard.plist Support
      [loaded] com.google.keystone.daemon.plist Support
      [running] com.makerbot.conveyor.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.prey.agent.plist Support
      [loaded] com.rogueamoeba.instanton-agent.plist Support
      [loaded] com.teamviewer.Helper.plist Support
      [not loaded] com.teamviewer.teamviewer_service.plist Support
    User Launch Agents: ℹ️
      [failed] com.facebook.videochat.[redacted].plist Support
      [loaded] com.nero.HSMMonitor.plist Support
      [running] com.spotify.webhelper.plist Support
      [running] homebrew.mxcl.mongodb.plist Support
      [running] homebrew.mxcl.mysql.plist Support
    User Login Items: ℹ️
      Flux 2 Application (/Applications/Flux 2.app)
      GrowlHelperApp Application (/Library/PreferencePanes/Growl.prefPane/Contents/Resources/GrowlHelperApp.app)
      Alfred Application (/Applications/Alfred.app)
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      HipChat UNKNOWN (missing value)
      Dropbox Application (/Applications/Dropbox.app)
      BetterSnapTool Application (/Applications/BetterSnapTool.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      Google Drive Application (/Applications/Google Drive.app)
    Internet Plug-ins: ℹ️
      AdobeAAMDetect: Version: AdobeAAMDetect 1.0.0.0 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      SharePointBrowserPlugin: Version: 14.1.0 Support
      googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
      Unity Web Player: Version: UnityPlayer version 4.0.1f1 Support
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User Internet Plug-ins: ℹ️
      WebEx64: Version: 1.0 - SDK 10.5 Support
      Picasa: Version: 1.0 - SDK 10.4 Support
      Dashlane: Version: Dashlane 1.0.0 - SDK 10.10 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      FUSE for OS X (OSXFUSE)  Support
      Growl  Support
      MySQL  Support
      Native Instruments USB Audio  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Macintosh HD: Disk size: 499.05 GB Disk used: 474.29 GB
      Destinations:
      Macintosh HD [Local]
      Total size: 499.76 GB
      Total number of backups: 2
      Oldest backup: 2013-07-29 01:42:19 +0000
      Last backup: 2013-07-29 02:54:52 +0000
      Size of backup disk: Too small
      Backup size 499.76 GB < (Disk used 474.29 GB X 3)
    Top Processes by CPU: ℹ️
          63% Dropbox
          15% WindowServer
          14% Airfoil
          12% Google Chrome
          6% com.apple.preference.security.remoteservice
    Top Processes by Memory: ℹ️
      187 MB Google Chrome
      86 MB Google Chrome Helper EH
      58 MB mds_stores
      46 MB Dropbox
      43 MB Airfoil
    Virtual Memory Information: ℹ️
      75 MB Free RAM
      2.21 GB Active RAM
      2.12 GB Inactive RAM
      2.14 GB Wired RAM
      384.98 GB Page-ins
      19.83 GB Page-outs

    19.83 GB Page-outs
    You are maxing out your RAM. Try quitting Chrome, it seems to be a resource hog and try closing other applications that you aren't using.

  • IMac is running slow again after upgrading Memory to 6 GB 800 MHz DDR2 SDRAM.  Mail is especially slow.  I have searched the community info, but I am really a novice and most of the solutions appear to be beyond my level of proficiency. Please help!

    I am at a loss. even after reading other questions and responses.  After upgrading to Mt. Lion, everything on my iMac slowed down.  I knew more memory would be needed, so I went from 2G to 6G.  That worked for awhile, but now, about 3 weeks later, things are slowing down again.  Mail is especially slow, when moving from one message to another, and also just plain typing is delayed in mail.  iPhoto has had the spinning wheel issue since change to Mt. Lion, but it eventually stops and the app itself is functional, so this is just annoying as much as anything.
    Any easy, simple to follow instructions would be appreciated.  Is it better for a novice to take to the Genius Bar or to an approved Mac repair center in my area, rather than attempt some of the solutions I've seen offered here.  And, if I do, what's the likelihood the issues will be resolvable?? Clearly, I am not the only one with this issue ...
    Thanks for any help you can offer.

    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Why are both my Mac's so slow now after upgrading to Mavericks?

    I have 2 Macs, an MB Pro Core i5, & Mac Mini Mid 2010 Core 2 Duo, (both 4/320's) and both have remained significantly slower, even after indexing, unless indexing takes days upon days. I understand why the Mini may have taken a speed dip, but a Core i5 unit too?

    The upgrade was done over a dysfunctional system. Do this:
    Fixing a Mavericks Installation Problem
    How to manage a failed OS X Mavericks installation | MacFixIt - CNET Reviews.
    Re-download and reinstall Mavericks.
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion/Mavericks: Select Reinstall Lion/Mountain Lion/Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • New MBA extremely slow internet after upgrading to 10.6.7

    Hey Folks, I have updating my brand new MBA to 10.6.7 and my internet is now extremely slow through the airpot. All of my other macs are running 10.6.6 and are very fast. Im using a new Airport Extreme base station, does anyone have any idea on how to fix this. LIke I mean its extremely slow online.
    Thanks
    Jason

    Good day,
    I'd like to confirm a few things:
    What action/activity are you performing in Acrobat when it crashes?
    Is the crash consistent at the same point?
    You stated in the subject '..after upgrading to 10.6.7'
    What OS was on your iMac when you purchased it?
    Was this problem occuring when using an earlier verion of 10.6.x?
    Have you applied to font update Apple released to address some of the problems they introduced with 10.6.7?
    Did you perform a clean install of Acrobat on your iMac after you purchased it or was the application transferred in some way?
    I hope we can get this resolved for you!
    Regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • Query slows down after upgrade

    Hi,
    After upgrade from oracle 10 to oracle 11 a simple query is slowing down alot.
    Same amount of records, same table only the execution cost time is increased
    Can someone give me some feedback over this problem?
    Can I check some things to look into the problem?
    Thx in advance.
    Greetings
    query:
    Select nvl(sum(a.BM_OPENSTAAND_DEBET- a.BM_OPENSTAAND_CREDIT),0)
    from bh.bh123gh a
    where
    a.F123_AR_NR>='4400000000' and
    a.F123_AR_NR<='4404000000' and
    a.F123_KL_LEV_AR_NR='0631001000' and
    a.SRT_REK=2 and
    a.F123_BKJR>=0000 and
    a.F123_BKJR<=2011 and
    a.F123_FIRMA=2
    explain plans
    oracle 11
    cost 1,792
    Bytes: 38
    Cardinality: 1
    oracle 10
    cost 1,594
    Bytes: 38
    Cardinality: 1

    >
    After upgrade from oracle 10 to oracle 11 a simple query is slowing down alot.
    Same amount of records, same table only the execution cost time is increased
    Can someone give me some feedback over this problem?
    Can I check some things to look into the problem?
    Thx in advance.
    >
    Is it just one query or all queries are behaving strangely? If it's just one query, do a trace and see where it's slowing down.
    In the meanwhile, you can also modify the optimizer_features_enable parameter at session level and check the explain plan.
    Alter session set optimizer_features_enable='10.2.0.5';
    Now test the query.
    By the way, if you are just worried about the COST factor, you can just ignore it. COST by itself has no real meaning. You will only have to look at the response time.
    Regards

  • Very slow encoding after upgrade from 5.03 to 5.5 with MXO2 mini

    Hi all.
    After upgrading from CS5.03 to 5.5 my encoding now takes 5 times as long. A 2 minute HD Video file would take 2 minutes, and still does on the PC I haven't upgraded (identical almost) but now with CS5.5 it takes almost 11 minutes.
    Some explanation....
    I create HD MJPEG files on a PC with Blackmagic Decklink.
    I transfer these files to an HPz800 which used to run CS5.03 with Matrox Utils 5.1.1.37 and an MXO2 Mini with Max. (Nvidia Quadro fx4800 and 12GB of RAM)
    On a Blackmagic timeline HD 1080i MJPEG with filters of Auto Color, Fast Color Corrector and Gamma correction a 2 minute timeline would encode in 2 minutes give or take a couple of seconds.
    Now with CS5.5 and Mtx 5.5 an identical file takes 11 minutes to encode to Microsoft avi - Matrox 1920 x 1080i - 25fps.
    If I remove the filters (which I need to be able to use) it will come down to 2 minutes as it used to be.....so it seems to be the filters are now slowing things down when they never used to. I have never rendered before exporting. Ever. So this time I tried rendering first and it brought the 11 minutes down to 7 minutes but when taking into account the 4 minutes rendering time I am no better off.
    I have updated CS5.5 to CS 5.5.1 and MTX Utils to 5.5 and then 5.5.1 and it makes no difference. Still 11 minutes to decode 2 minutes with three filters, which is exactly what I have always been doing but now it doesn't work....
    Can anybody help? or make a suggestion as to why using filters in 5.5 now multiplies the encode time by 5 when it never used to. Everything else bar Matrox Utils on this machine is as it was before the upgrade to 5.5 and as I say my older machine is still 5.03 it can do it all in 2 minutes even with the filters intact.
    So have I really spent a small fortune upgrading to make my output 5 times slower. Not happy......

    To go further, every single encode that I have done is slower than it was before with CS5.01 or 5.03.
    This is odd because going from Blackmagic to any other codec doesn't necessarily need the Matrox box or Matrox utils
    Blackmagic HD or SD to
    Matrox HD
    QT HD MP4
    QT SD DV25
    DV AVI SD
    Mpeg2 - DVD
    Every single encode is slow by 2x to 6x.
    Why should Blackmagic HD to QT MOV MP4 take twice as long as it used to...... having said that The speeds I am seeing now are what it was like before I attached the box in the first place, whether a Matrox codec was involved or not.... It is acting like a blocked funnel. when it used to be a lovely wide and clear funnel.
    Anyway Matrox have reproduced the problem and are investigating, so hopefully there will be an answer soon....

  • Slow - Unusable after upgrade - MacPro Mid2012

    Upgraded to Yosemite. Plenty of GB space (72 remaining). Ran Disk Utility Repair from Safe Mode (no issues). Reset SMC and NVRAM. Have re-installed as well. I do not have a Time Machine Back Up saved so I am against a complete restore at the time.
    I need some other tips to either fix/speed up this issue, or a way to Save All Documents to an External in order to try a complete restore...
    Thanks for the suggestions.

    Activity Monitor - Mavericks  also Yosemite
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks
    Things you can do to resolve slowdowns  see post by Kappy
    6 Easy Tips to Speed Up OS X Yosemite on Your Mac
    Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read.
    Etrecheck – System Information

  • Everything is slowed down after upgrading to ios8 ?

    I have various problems after upgrading to IOS8 with mij Ipad2. Pages has for  example become very slow. I can say that it has in fact become unusable: I get typing errors caused by the slowness.
    Another complaint is that the keyboard all the time covers the text.
    Further I am using Icloud drive for Pages, but I want to change that. When I change this in the system, then I lose all my documents! ( but if I close WIFI then I keep the documents: I donot understand).
    I would like to know if Apple reads these posts? And is there a simple possibilty to downgrade ?

    As Skydiver119 has reinforced,
    Apple provides NO means or provision to downgrade iDevices to a previously installed iOS version.
    There are unsupported methods to do so, but these involves doing things to your Apple iDevice that is NOT permitted by Apple and Apple has taken steps to make sure there are consequences, like making your iPad completely inoperable, by using unauthorized, unsupported and unofficial means to circumvent the normal,default operation of their mobile devices.
    To use these methods to try and fix your Apple iDevice means, Apple is going to punish you for doing so, by making sure your iDevice no longer functions.

  • Painfully slow internet after upgrading to Snow Leopard

    hi all, i recently upgraded to Slow leopard.
    My internet has soon become painfully slow, taking (literally) minutes to load pages. I have checked my modem & router, they seem to be fine as my iPhone & Vista laptop run perfectly on the same network.
    does anybody know what this could be?

    If you have not done so since upgrading to Snow Leopard, you should run Disk Utility and use +Repair Disk Permissions+.
    Have you used Software Update to apply Apple's latest updates after upgrading to Snow Leopard. If there are updates, you should run it a second time to ensure there were no dependent updates.
    As a test, you can create a new admin user account in System Preferences Accounts pane.
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
    Log out and log in to the new account. Try the things that caused the problems. Is it fast in the new account, or is it the same? If it is fast, then the cause is likely to be in your normal user account. If it is the same, then the cause is likely to be with the overall system (the OS).
    You can also try doing a Safe Mode startup
    http://support.apple.com/kb/HT1455
    This will do some maintenance during startup and also load only Apple's essential system extensions and processes. Any third party software you have installed will not automatically run. Check the performance while in safe mode, and if there is improvement, restart normally to see if the problem comes back or not.

  • I can't open photos stored on my phone after upgrading to ios6

    After upgrading to ios6 i have a problem in accessing my photos stored in my iphone!!!

    Hiii
    Yesterday i updated my software to the new ios6 but i can't access any photos or videos saved on my phone!!! Even when i try to take a new picture it's supposed to be stored automaticaly but i open photos then i find no photos or videos !!! Empty folder!!!
    I hope this explained my problem &amp; thxx for trying to help :)

Maybe you are looking for

  • HP Laserjet M2727nf - Firmware not loading to Printer

    My printer display was not working so I ordered a new one.  But as I read some postings it seems to be by formatter board.  I baked the formatter board.  After I baked it, the display would show: Hewitt Packard >>>>>.  I did the below but the firmwar

  • Ipod frozen on Do Not Disconnect

    I have connected my ipod to my pc to update, which it has done, this is not the first time is has been connected to this computer. iTunes sayd that the update is complete but my ipod say do not disconnect. When i press eject iPod from iTunes it says

  • How to access XML attributes with JSTL

    Hello, I'm using the XML functions of JSTL. I'm trying to parse the following RSS feed. http://weather.yahooapis.com/forecastrss?p=USNY0996 I can get it parsed and access the elements via JSTL, but is it possible to access the attributes of some of t

  • Vertical black line running down imac screen

    This morning i noticed for the first time (wasn't there yesterday) a thin black vertical line running down my 21' imac screen. Any suggestions?

  • HP 8600 wireless problem

    My printer is showing as connected to the network and my computer is connected but they won't talk to each other.  It was working but suddenly stopped.  I have deleted and restarted the printer, removed and added from the imac.  It does worked when w