Slow playback on .wmv files...

Hi all,
I'm using QT 7.6.4 with the appropriate updated version of Flip4Mac, and I'm noticing that when I open a .wmv file, it takes awhile for the entire file to load. In previous versions, I could fast forward to any section of the video, but not I notice that I havta wait for the entire video to load before I can fast forward ahead. I can start the video just fine, but I can't skip ahead immediately like I used to be able to do. Appears to be happening with files of all sizes...Any clues?
Thanks!

This is normal behavior for QuickTime X.
Use QuickTime 7.6.3 instead.

Similar Messages

  • Jerky playback of wmv files

    Please can anyone suggest how to fix this. Medium size wmv file (128Mb). Flip4mac version 2.2.3.7 and QuickTime 7.6 (472). Very jerky playback of both audio and video with much spinning beachball.
    Message was edited by: Roger Sinden

    Medium size means nothing. How long is it? If it is one minute that is a really high bitrate video and the G4 may not be able to decode it fast enough.
    Try this - open it, then "save As" which will save it into a MOV container (it will still be WMV video).
    See if it plays back nicely. Also try a computer from more recent times.
    You can see a 128 MB WMV will save as a 256MB or even bigger MOV file as the video is not compressed any more in the MOV container.

  • IDVD encoding of WMV file extremely slow???

    Hi,
    To create DVD project from a WMV file (100MB) takes around 50 mins!
    I have a 4 Core 2.66MHz with 6GB RAM machine!!
    Is there a way to speed up the processing?
    Thanks.

    Flip4Mac is your best tool for this. Don't know if their Episode can do it faster, but you might check it out, although it's a bit more $$.
    Another suggestion is to post a question for Craig at the F4M user's forum HERE...he's got a lot of knowledge about video encoding.

  • Trouble with WMV files in Premiere

    Hello,
    I searched first but didn't find my issue or really old discussions came up.
    Basically I recorded some screen captured tutorials with Microsoft Expression.  Since I'm using the free version when I'm done my only option is to export a WMV file.  It won't let me pick MP4 for example.
    Anyway I exported fairly lightweight files from Expression, 10,000 kbps, 29,97 fps.  In total I'm only talking about 243 MB of footage.
    These files play perfect in Windows Media Player and completely aweful in Premiere Pro CC.  This is on a Dell 7600 Nvidia Maximus setup with Mercury CUDA playback enabled.  It should fly with only one video track playing.  On other projects I've used DSLR 1080p footage with AE linked comps in the timeline with heavy effects and I could still play back in realtime.
    I'm currently rendering a proxy file so that I can actually work and see footage play back.  Typically my render times are great but with the WMV files it's terrible.  It's going to take 4.5 hours to render 22 minutes of just video.  No crazy AE comp or anything like that.
    So anything I can do to fix this?  i see myself doing more of these in the future and this workflow is horrible and a huge waste of time.  There's gotta be a better option.
    Thanks!
    Rich

    Aweful as in 30fps playback in WMP and 0fps playback in Premiere.  The video will play choppy for the first 1 or 2 seconds then stop updating alltogether.  Only when I stop playback (and after a several second wait) will the video refresh.
    Again, plays 100% perfectly in WMP.  Files are small, 50-100 megs each.  Only in Premiere do they not play correctly.
    To even work I've had to create proxy videos in another format.  That wouldn't be that big of a deal but the slow playback affects Media Encoder too.  Encoding 250 megs, about 25 minutes of footage in a low bit rate, took about 6 hours.  Normally with another format that would only take a couple of minutes.
    Kinda funny / sad.  My video was full frame until I tried uninstalling that update described in the other thread.  Now it's half frame, ha ha.  Now to try and reinstall that update that broke their system in the hopes that it fixes mine.

  • How to create clips in old WMV files

    Hi
    I have lots of old wmv files created with movie maker 5 years ago.  Can i import/add them into premiere elements and then somehow automatically split them into clips based on scene change or time/date chage etc.?  If so how do i do this, i'm struggling to find help documents about this and i dont have time to manually go through every single file  and split them.  
    Also is there a way i can easily improve the quality of these files, they seem very pixelated when i play them in Pr elements.
    thanks for any help you can provide.

    >improve the quality of these files
    Not really... WMV is a highly compressed file, and once a file has been compressed, there is no way to bring back that lost information
    As for the rest... some reading (and, you did not state your PreElements version, so info for all recent versions)
    Version 11 http://forums.adobe.com/thread/1071694
    -and http://forums.adobe.com/thread/1075408
    Importing Video http://forums.adobe.com/thread/1065281
    Saving & Sharing http://forums.adobe.com/thread/1051093
    Sharing for Computer http://forums.adobe.com/thread/1058237
    Steve's Basic Training Tutorials... steps are the same for several versions
    -http://forums.adobe.com/thread/537685
    -v10 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-Version/dp/1466286377/
    -v09 http://www.amazon.com/Muvipix-com-Guide-Premiere-Elements-version/dp/1453871209/
    -All http://www.amazon.com/Tricks-Adobe-Premiere-Elements-Muvipix-com/dp/1451529724/
    -and http://forums.adobe.com/thread/498626
    -and http://prodesigntools.com/four-hours-free-video-tutorials-new-photoshop-elements-9-pse9.ht ml
    -and http://prodesigntools.com/five-hours-free-tutorials-photoshop-and-premiere-elements-7-and- 8.html
    FAQ http://forums.adobe.com/community/premiere_elements/premiere_elements_faq
    TIPS http://forums.adobe.com/community/premiere_elements/premiere_elements_tips
    Another help site http://muvipix.com/ or http://muvipix.com/phpBB3/
    Premiere Elements Updates http://www.adobe.com/support/downloads/product.jsp?product=101&platform=Windows
    AVCHD to DVD http://forums.adobe.com/thread/862611
    Moto Audio Problems http://forums.adobe.com/thread/869519
    Cyberlink Timeline Problem http://forums.adobe.com/thread/882117
    Will NOT edit Flash http://forums.adobe.com/thread/911671
    Elements and AVCHD http://forums.adobe.com/thread/947846
    Remove Watermark http://forums.adobe.com/thread/433730?tstart=30
    Jerky or slow playback http://forums.adobe.com/thread/1071217
    User Guide PDF http://help.adobe.com/en_US/premiereelements/using/index.html
    Right click PDF link in the upper right corner and select to save to your hard drive
    -the page also has links to help pages for previous versions

  • MacBook Pro won't play .mov or .wmv files.

    Since "upgrading" to Lion my MacBook Pro won't play .mov or .wmv files, all I get is a black screen and the audio.  It's so frustrating!!    
    I've read many other posts all along the same lines and wherever possible I've tried to follow the advice which has been given but nothing works.    I've updated all the drivers I can and I've even reinstalled Lion, nothing makes a difference.   
    I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update.   
    I had no problems when running Snow Leopard and it would seem, looking at everyone else's problems, that the common issue is Lion.   Seriously, this is one area where Lion is a backwards step.   It should just work (like most things from Apple), but it doesn't.
    Personally I believe there is a problem with Lion but from what I've found out from speaking to friends with other Apple kit, this might be a random issue only affecting some people as some have said they've had no problems while others have had the same issues as me.    One guy reinstalled Lion and it resolved the issue for him, I've not been as lucky.  
    As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!

    I'm not really looking for any more advice, all I want is someone from Apple to read these posts, realise there is problem and get working on a fix or update... As I say, I'm not really looking for more advice, simply some sort of update from Apple to fix it.   PLEASE!!!
    This is a peer-to-peer user forum. Perhaps you would see more action if you and others would file a formal "Bug" report with Apple QuickTime technical people rather than repeatedly reporting a possible problematic problem which may or may not affect others on a random basis. QUICKTIME PRODUCT FEEDBACK
    Since you aren't seeking further advice here is what I have observed. Not being a regular WMV file user, I had to create my own sample file to test—a WMV 9 file containing WMV3 compressed video and WMA2 compressed audio. Since I normally use QT 7 as my primary media player, I also stored the WMV data in its partially decompressed form in an MOV file container to avoid pre-playback delays in "classic" player routines and also provide a secondary playback test of MOV wrapped content. These files play as follows using the Flip4Mac component/player support and uncoded URL uploads:
    QT 7.6.6 "Open File" - both files play correctly.
    QT 7.6.6 "Open URL" - both files play correctly.
    QT X.1 "Open File" - WMV file plays correctly. MOV file plays video without audio.
    QT X.1 "Open Location" - WMV file appears to open but plays with "black" screen and no audio. MOV file plays video without audio.
    VLC "Open File" - WMV plays correctly. MOV file doesn't open,
    VLC "Open URL" - WMV file plays correctly. MOV file appears to open but nothing plays.
    MPEG Streamclip "Open File" - both files play correctly.
    MPEG Streamclip "Open URL" - both files play correctly.
    GarageBand - WMV file will not import but MOV file does.
    iTunes - WMV file will not import. MOV file container is accepted but as soon as iTuness sees the compression formats, it aborts import.
    Safari - WMV file URL auto-downloads and playes in the QT X.1 Player. The MOV file URL opens and plays in Safari.
    As you can see from these results the files do play but are subject to many different constrints based on old/new video technology support, independent QT subsets and/or container trapping constraints. In short, individual user results will depend on presence/absence of component support, actual compression formats, file container, application being used, and how the application is being used. Unfortunately, most users here can't or won't provide the prerequisite information or a sample file for independent examination. This makes it next to impossible to give advice in these matters or categorize the specific nature of the problem.
    SAMPLE WMV FILE
    SAMPLE MOV FILE

  • Help needed in creating WMV File

    Greetings...I have been given a 10:30 Beta copy of a project that needs to be converted into a .wmv file. I did not edit this project in FCP, however, it is a FCP edited project and still exists as a FCP project on another Mac Powerbook. It was just exported onto to Beta tape for TV playback purposes.
    The project needs to be converted to a .wmv and this is a new process for me. I've consulted my work books but am not quite sure as to the process. Do I save the project as a QuickTime Movie and then launch Compressor and import it? If so, I am in need of some direction as this is a new process to be learned...Are there any links/tutorials available that can guide me?
    Thank you.
    Thom

    Thanks for the Reply,
    I have been in touch with Craig over the last few days. The strange thing to me is that I use Sorenson Squeeze on the same system (with the WMV settings all exactly the same as I had set in Compressor) and the job completes 100% with no problems.
    As I told Craig at F4M, I don't think this is a F4M issue. Also, other jobs I submit via Compressor (ie, to .m2v for DVD authoring) work fine.

  • Working with .wmv files in GoLive 6.0...HELP

    I have spent hours searching for what would seem to be an easy answer and have given up. I am a intermediate level user of GoLive 6.0 trying to insert a .wmv file for my website. Can someone please provide step by step instructions on how do this? Help....thank you!

    Saving a WMV as MOV in QuicktimePro is simply putting a MOV wrapper on the WMV so FCP will better handle it. It's a Save As not an export so there's no additional compression.
    Ultimately you will have to render though, most likely because it's not one of the video formats natively handled by FCP (DV, DVCPro50, etc). It's not just the physical settings, the "video" codec itself must be supported. BTW if you were to edit in HDV you'd have to render too for output (to create new GOP structure in that case though).
    Hi Craig,
    Thanks for the advice, a few things though....
    "Flip4Mac Player Pro allows you to edit WMV in FCP."
    The problem is that I need to render when I import
    WMV files into FCP, even though I have matched all of
    the parameters in the sequence settings (ie. pixel
    aspect ratio, frame rate, frame size, etc.)
    I don't know for sure, but my understanding is I have
    to render because there is no WM9 option under the
    "compressor" parameter in the Sequence Settings.
    Because of this it is impossible to import WMV files
    without rendering even with FLip4Mac, because I have
    it installed and can still export as a WMV file.
    Have you discovered a way to import WMV files into
    FCP without needing rendering? This is critical for
    me because the environment I'm in doesn't allow for
    long render times, as it will slow down the workflow
    of the whole newsroom.
    "I can also open WMV in QuicktimePro (with Flip4Mac)
    and save the file as MOV. I find it works smoother
    that way."
    But doesn't it degrade the quality when you convert
    to .MOV? And for me, going from WMV to MOV back to
    WMV will result in degradations at each step won't
    it?
    Curtis

  • Working with WMV files in FCP 5 Timeline

    I know Flip4Mac Studio Edition allows for importing and exporting into and out of FCP 5 in WMV format. What I'm not sure of, is can you do intensive editing on the WMV files in FCP 5 without any glitches. Will FCP run smoothly?
    I am asking because I work at online company that will be receiving wmv files on its servers. This is a high volume workflow with an intense turnover rate. We are receiving hour long clips and re-editing them down to 2 minutes. There is no time to go through lengthy WMV to MOV conversions. We need to receive, edit, and output all in WMV.
    Can FLip4Mac with FCP 5 edit an intense environment like this? Where everything is done in WMV? Or Is Flip4Mac primarily for converting WMV into MOV so that editing in FCP is done with MOV files, and then at the end exporting as WMV again.
    Is FLip4Mac the only solution. Are there others? After recommending and praising Macs, I may be on thin ice if FLip4Mac isn't a sufficient workaround!!
    Thanks Curtis

    Saving a WMV as MOV in QuicktimePro is simply putting a MOV wrapper on the WMV so FCP will better handle it. It's a Save As not an export so there's no additional compression.
    Ultimately you will have to render though, most likely because it's not one of the video formats natively handled by FCP (DV, DVCPro50, etc). It's not just the physical settings, the "video" codec itself must be supported. BTW if you were to edit in HDV you'd have to render too for output (to create new GOP structure in that case though).
    Hi Craig,
    Thanks for the advice, a few things though....
    "Flip4Mac Player Pro allows you to edit WMV in FCP."
    The problem is that I need to render when I import
    WMV files into FCP, even though I have matched all of
    the parameters in the sequence settings (ie. pixel
    aspect ratio, frame rate, frame size, etc.)
    I don't know for sure, but my understanding is I have
    to render because there is no WM9 option under the
    "compressor" parameter in the Sequence Settings.
    Because of this it is impossible to import WMV files
    without rendering even with FLip4Mac, because I have
    it installed and can still export as a WMV file.
    Have you discovered a way to import WMV files into
    FCP without needing rendering? This is critical for
    me because the environment I'm in doesn't allow for
    long render times, as it will slow down the workflow
    of the whole newsroom.
    "I can also open WMV in QuicktimePro (with Flip4Mac)
    and save the file as MOV. I find it works smoother
    that way."
    But doesn't it degrade the quality when you convert
    to .MOV? And for me, going from WMV to MOV back to
    WMV will result in degradations at each step won't
    it?
    Curtis

  • I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty

    I am having issues related to storage and I believe this is causing my computer to slow down. "Other" files part is the major occupier(180 GB). I have done Omni disk and multiple other cleaning(iTunes-device, restart, etc), yet have not been able to empty any more space, nor to speed up my computer? Any suggestions? All your contributions are welcomed. Thanks. Mehmet Mazhar Celikoyar

    Below is the result:
    Hardware Information:
              MacBook Pro (15-inch, Mid 2009)
              MacBook Pro - model: MacBookPro5,3
              1 3.06 GHz Intel Core 2 Duo CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce 9400M - VRAM: 256 MB
              NVIDIA GeForce 9600M GT - VRAM: 512 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              HP IO - Path: /Library/StartupItems/HP IO
    System Software:
              OS X 10.9 (13A603) - Uptime: 3 days 22:8:6
    Disk Information:
              ST9500420ASG disk0 : (500.11 GB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 499.25 GB (220.49 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
              HL-DT-ST DVDRW  GS23N 
    USB Information:
              Apple Inc. Built-in iSight
              Apple Internal Memory Card Reader
              Apple Inc. Apple Internal Keyboard / Trackpad
              Apple Computer, Inc. IR Receiver
              Apple Inc. BRCM2046 Hub
                        Apple Inc. Bluetooth USB Host Controller
    FireWire Information:
    Thunderbolt Information:
    Kernel Extensions:
              com.rim.driver.BlackBerryUSBDriverInt          (0.0.64)
              com.livedrive.filesystems.livedrivefs          (2.1.14)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.adobe.versioncueCS4.plist
              [loaded] com.creativebe.MainMenuHelper.plist
              [loaded] com.macpaw.CleanMyMac2.Agent.plist
              [loaded] com.magican.castle.plist
              [loaded] com.microsoft.office.licensing.helper.plist
              [loaded] com.rim.BBDaemon.plist
              [failed] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist
    Launch Agents:
              [loaded] com.adobe.CS4ServiceManager.plist
              [loaded] com.hp.messagecenter.launcher.plist
              [loaded] com.hp.productresearch.plist
              [loaded] com.rim.BBLaunchAgent.plist
    User Launch Agents:
              [loaded] com.adobe.ARM.[...].plist
              [failed] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist
              [failed] com.macpaw.CleanMyMac2Helper.scheduledScan.plist
              [failed] com.macpaw.CleanMyMac2Helper.trashWatcher.plist
              [failed] com.UninstallerTool.plist
              [failed] com.VolumeWatcherTool.plist
              [failed] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              BlackBerry Device Manager
              HP Scheduler
    3rd Party Preference Panes:
              Adobe Version Cue CS4
              DC30 Xact Driver Panel
              Flash Player
              Flip4Mac WMV
              Perian
    Internet Plug-ins:
              AdobePDFViewer.plugin
              AdobePDFViewerNPAPI.plugin
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              Flip4Mac WMV Plugin.plugin
              iPhotoPhotocast.plugin
              JavaAppletPlugin.plugin
              OfficeLiveBrowserPlugin.plugin
              QuickTime Plugin.plugin
              SharePointBrowserPlugin.plugin
              Silverlight.plugin
    User Internet Plug-ins:
              OctoshapeWeb.plugin
    Bad Fonts:
              None
    Time Machine:
              Mobile backups: OFF
              Auto backup: NO
              Volumes being backed up:
                        Macintosh HD: Disk size: 499.25 GB Disk used: 278.75 GB
              Destinations:
                        TOSHIBA EXT [Local] (Last used)
                        Total size: 2 TB
                        Total number of backups: 5
                        Oldest backup: 2013-10-24 23:21:31 +0000
                        Last backup: 2013-10-25 02:59:08 +0000
                        Size of backup disk: Excellent
                                  Backup size 2 TB > (Disk size 499.25 GB X 3)
    Top Processes by CPU:
                   3%          WindowServer
                   1%          EtreCheck
                   1%          Microsoft PowerPoint
                   0%          BBLaunchAgent
                   0%          fontd
                   0%          aosnotifyd
    Top Processes by Memory:
              168 MB             Microsoft PowerPoint
              123 MB             Safari
              86 MB              Mail
              74 MB              WindowServer
              45 MB              com.apple.WebKit.Networking
              45 MB              com.apple.WebKit.WebContent
              41 MB              Finder
              41 MB              PluginProcess
              41 MB              mds_stores
              33 MB              Notes
    Virtual Memory Statistics:
              72 MB              Free RAM
              1.27 GB            Active RAM
              1.24 GB            Inactive RAM
              667 MB             Wired RAM
              2.58 GB            Page-ins
              111 MB             Page-outs

  • Why does it take so long to render a quicktime and/or wmv file?

    I hope you can help with this! It's taking me forever to save a project as a qt file. I'm saving in expert settings with LAN/Intranet or broadband-high as the setting. In Imovie 4.0.1 I could usally render a 6+ minute project in under 10 minutes with those settings...in Imoive 6 HD it's going to take 3 times as long.
    In a seperate issue...when I try to save my project as a wmv file it will only save the first :30 seconds or a six minute project.
    Anyone have any ideas? What am I doing wrong? Thank yo for your advice!!!!

    I'm saving in expert settings with LAN/Intranet or broadband-high as the setting.
    As others have suggested, the type of export you are doing is apparently different than you did in iMovie 4.
    Note that the LAN/Intranet and broadband-high you selected is only the second part of the export settings. It affects the size of the movie and indirectly, its quality. There's less compression with the LAN/Intranet setting and it delivers great quality.
    The first part is the type of QuickTime movie to export to, selected from the popUp menu above the menu where you picked the LAN/Intranet setting. There are many choices offered in the top popUp menu, and for some, other settings to configure (optional).
    If your export used the H.264 codec to compress the movie then Yes, the export will be slower than seen with other codecs. It's a very high quality codec, so the export is slower than others. That's the price we pay for quality I guess. (A price I happily pay. I usually do some other task on the computer as it chugs away.)
    Karl

  • .wmv file play like streaming files in Quicktime.

    I have downloaded some .wmv files, and tried to play them in both Version 10 and the Quicktime 7 Pro utility. I'm on an iMac using operating system 10.6.5 and I have flip4mac installed. The movies open, but seem to be streaming from the internet, and cannot be fast forwarded or edited. I have looked in the Quicktime and flip4mac preferences, but there doesn't seem to be any settings that address this. Help!
    Peter

    The movies open, but seem to be streaming from the internet, and cannot be fast forwarded or edited.
    If by this you mean the file opens and the playhead starts moving but the "progress bar" is still cacheing data, then this is normal if the data in in an WMV file container. QT has to partially decompress the data for playback/use. If you want to avoid thios delay, you can save the data in its partially decompressed format to an MOV file but it will take up more hard drive space than the WMV file version. If you allow the file to decompress or load the MOV version and you still can't "scrub" or FF the playhead, then you may have a problem. As to editing/converting the file, as Limnos points out, the free Flip4Mac "Playback" component does not allow you to do any real editing or converting of the content and you would have to purchase one of the decoder, bidirectional or advanced codec packages to do this.

  • Import wmv file to the project -Premier CS5.5. I got a half screen black!!

    Hi I tried to import a wmv file to the project as i do everyday with Premier CS5.5. I got a half screen black!! Is anyone know the reason for that?  Thanks!!!

    It appears that Microsoft has issued the fixed update:
    https://technet.microsoft.com/en-us/security/bulletin/ms13-057
    See the "Update FAQ" section:
    "Why was this bulletin revised on August 13, 2013?
    Microsoft revised this bulletin to rerelease the 2803821 update for Windows 7 and Windows Server 2008 R2.
    The rereleased update addresses an application compatibility issue in which WMV encoded video could fail to properly render during playback. Windows 7 and Windows Server 2008 R2 customers should install the rereleased update."

  • Has anyone resolved the slow playback issue?

    I've run across a few older posts related to slow playback of Captivate output, but it doesn't look like the issue has been resolved. I'm experiencing the same problem on a random basis.
    At first I thought it was just in the preview mode, so every time I made a change, I published the project to test it. Then the published files started playing back extremely slowly, but not all the time. For example:
    1. I published the project as a swf file, and it played back fine.
    2. I added one slide with a Fade transition and published again. The playback was absurdly slow this time, and I hadn't changed any settings.
    3. Without changing anything, I published again, but I selected the Windows Executable output option. The playback was fine.
    4. I published again, but I switched back to the swf output - it was fine this time.
    5. Tried the Preview feature again. The mouse movement was extremely slow, but the slide transitions weren't as bad - just choppy.
    I'm using Captivate 5.5 on Windows XP. Any thoughts?

    Does the swf play that way on other computers besides your own?

  • FCP Project to .wmv file?

    I have a FCP project that I have to export as a .wmv file. Can this be done?

    It's Telestream converter for Windows Media. I have the HD studio version. It works out of FCP or Compressor. I was using Squeeze but they're using the new VC1 encoding instead of wm9. It caused some playback problems on our streaming server.

Maybe you are looking for

  • Periods Open

    Hello, I want open preous periods. Actualy i have closed current perioud and opend feture periouds by mistake. I want to open currend perioud and close feture perioed.How it is possible... Thanks in advance....

  • HT204053 How can I sync two different email accounts?

    How can I sync two different email accounts? All of this Mobile Me and cloud stuff got me all flustered and now I have two accounts possibly 3.

  • What is the best Codec in Adobe CC for Multicam Playback and edit?

    I have been editing in FCP 7 for years and decided to make the switch (But I didn't want to ruin my old system (which is still good and seems to run better than the new one) so I bought a Mac-Mini as a test to play with CC).  I admit my new CPU is a

  • Patch 10.1.2.0.2 infrastructure

    I am installed patch set 4960210 after a fresh install of 10g release 2. I shutdown the mid-tier before apply the patch to the mid-tier server. It went well. I am not sure what I need to do before apply the patch to the infrastructure server. It seem

  • How to speed up rendering/ transcoding in FCPX

    It has just taken 8 (eight) hours to render then transcode two hours of video footage, before any editing. I have two video clips from a Panasonic camera in .MTS form. (1920 x 1080) To get them onto FCPX I used Handbrake to convert them to .mp4 files