Slow program start

I just got a new pc and according to specs it should be faster than my old. But when I start different programs they all take much longer time to load. I am sure it is not a virus issue, as it is a new pc and has been like that from day one. 
A few times it has happened, that the programs load very fast. Yesterday I run a bencmark test to check the speed, and the measure was fine and according the the specs.
But very strange was, that the rest of that day after running the bencmark, all the programs loaded suddenly very fast. Next day the pc was back in the slow mood. I have tried to disable the virus program but it does not make a difference, and according to the joblist there should be plenty of free ressources. So what what can be the reason?

Hello again wagnerh,
It is good to hear back from you!
Considering the process you have identified (TiWorker.exe) has been known to cause slow performance, I recommend following the steps in this resource on Windows 8, 8.1 High Disk Usage Caused by Tiworker.exe [Fix]. This should help imrpove the functionality of your operating system. Additionally, I also recommend taking a look at this document on TiWorker.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

  • Slow program start-time: Win8 Yoga 13

    Hey guys,
    I've heard a few other people mention this problem but can't find a thread on it.
    A few days after I got my Yoga 13, I noticed that programs- most notably metro apps, such as the calendar, weather, etc, can take as long as 15 seconds to load up whenever I first try to launch them. Also, there will be times where a metro app will be loading for 20+ seconds and then just report an error message that it crashed.
    Has anyone else experienced this? Aside from Office 365, Chrome, and Firefox, I have not installed anything else on this computer.
    Any suggestions?
    Cheers!
    Solved!
    Go to Solution.

    I have the same Problem, but the suggested solutions did not work.
    Configuration:
    Yoga 13, i7, 256GB SSD, 8GB Ram
    Win 8 Pro (updated to Pro)
    Kaspersky
    Office 2003
    Company Notebook
    The Desktop Applications (i. e. Outlook, Chrome, Exel, Word) are starting extremly fast. It is not measureable, maybe in one or two seconds.
    The Metro apps Need at least 12 seconds, quite often up to 20 seconds. Even simple parts like camera or the clock are needing such a Long start time.
    It does not matter if the Yoga is logged into the Company Network, my private Wifi or offline. Also deactivation from Kaspersky does not make any Change.
    Everything else is working fast, except the start from the Metro apps.

  • Program start-up slow under JWM

    I'm running JWM on my home computer owing to its lightness and configurability, and because I was able to configure it to look like gnome2--which I'd managed to get my wife to use--which is a less intimidating interface to certain members of my household. It's working ok, though it's not nearly as snappy as I'd expect it to be on this machine (which is a bit dated now, though with plenty of oomph for this lightweight desktop [early dual core, 2GB RAM]). Terminals and pcmanfm open fairly quickly--somewhere around 1 second or a bit less. I'd expect it to be closer to instantaneous, though.
    But when it comes to more substantial applications like firefox, chromium--even midori--or lowriter, the lag gets really noticeable. It takes something like 7 seconds for an application like midori or chromium to open after I've clicked on the respective icon. This is, of course, not a show-stopper: I can use the computer fine, despite the delays I'm seeing. But it does make me wonder whether something's misconfigured on this system.
    I recently did a long-overdue pacman -Syu on this system, so it's now using systemd. I also decided during that process that I wanted to get rid of the login manager (slim) to lighten things up a bit further. So I set the system up to log me in automatically, then boot to the GUI (using instructions found at https://wiki.archlinux.org/index.php/St … h_profile).
    I guess my .xinitrc file could be relevant, so I'll post its content below:
    #!/bin/sh
    # ~/.xinitrc
    # based on /etc/skel/.xinitrc as wiki says
    # Executed by startx (run your window manager from here)
    [[ -f ~/.Xresources ]] && xrdb -merge ~/.Xresources
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    xmobar &
    exec /usr/bin/jwm
    # exec ck-launch-session /usr/bin/jwm
    Anything look out of whack there? The final, commented line was entered from the Arch wiki entry for JWM, which appears quite out of date now, since consolekit seems to be deprecated. So I commented out that line. Can anyone spot any problems with this file?
    Also, I recently started Chromium from a terminal to see if it would output any error messages that could help me track down why I'm seeing these delays in program start-up. Following is what was output:
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    [5586:5600:0201/113155:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could
    not get owner of name 'org.freedesktop.NetworkManager': no such name
    [5586:5608:0201/113157:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could
    not get owner of name 'org.chromium.Mtpd': no such name
    [5586:5608:0201/113157:ERROR:object_proxy.cc(608)] Failed to get name owner. Got org.freedesktop.DBus.Error.NameHasNoOwner: Could
    not get owner of name 'org.chromium.Mtpd': no such name
    Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
    [5586:5586:0201/113200:ERROR:object_proxy.cc(513)] Failed to call method: org.chromium.Mtpd.EnumerateStorage: object_path=
    /org/chromium/Mtpd: org.freedesktop.DBus.Error.ServiceUnknown: The name org.chromium.Mtpd was not provided by any .service files
    I think I understand about the fontconfig error and how to fix that. But the freedesktop.DBus stuff is not very comprehensible to me. Could that relate in some way to the unusual delays I'm seeing in program start-up?
    Input will be appreciated.
    Thanks,
    James

    Information on why the boot time is/maybe longer.
    Startup - Slow Boot
    Startup - Slow Boot (2)
    Startup - Slow Boot (3)

  • Muse slow to start and slow to react to commands - only recenty observed, rest of system and programs are fine

    Over the last week, since the problems loggin into the password server that authenticats the CC program login, the muse application is very slow to start and slow to resond to commands. Like its in molasses.
    My system has not changed, only the normal windows updates have been applied.
    Has anyone else seen this please ??

    Bad form answering my own question, but I think I found the culprit, I installed, beacuse I thought it was a good think and might be useful, Google drive onto my system. After deinstalling this program, the sluggishness that I experienced within Muse, went away.
    As this was the only new thing that I had installed, I think that it was the problem,

  • Apps won't open and computer is slow to start up

    My mac book is screwed up. About a week ago I noticed that everything on my computer started working extremely slowly. So, I ran a verify disk in disk utility. I got a message that my start up disk had an error. So, I started up from the install disk and ran repair disk in the utility program. Once that finished I got a message that there were no problems found. So, nothing changed still slow. I decided to start up in safe mode and see if that fixed things. Well, after starting safe mode and then restarting regularly it was still very slow to start up and on top of that no applications, except for Mail and Safari, will open. Also, I have tried to back up the few files I have that were not backed up already and I keep getting error messages and can't move files. So, what do I do now? I live quite a long way from the nearest mac genius bar and would like to fix this here if possible. Any suggestions?

    Welcome to Apple Discussions.
    It's sounds like there's some corruption on your hard disk that Repair Disk fixes but then returns.
    Be sure you drive is not overly full. Rule of thumb would be over 85%.
    Then download DriveGenius you can use the tools there and the surface scan to diagnose. If the surface scan shows bad blocks, you'll need to replace the drive sooner or later and I'd suggest sooner.
    -mj

  • Mountain lion slow to start system

    well,
    i am update my ML yesterday, i have 8G memory core 2 duo 2.6 hd 500gb.
    anyway my mountain lion now need like 4 5 minutes to load when i am restart, before i load system very fast in 40 seconds.
    and the first minutes after load the system everything is slow, i check if the memory are installed but i see the 8g run.
    the first time open programs it is very slow after that the programs start be very fast, chrome is slow everything slow.
    i test smart utility and my hd  is passed, i am install the ML from zero, i put the new hardrive format and install, working very fast and great, today start that
    anyway that happend because the last update? someone have tips???  what can be? if system? something install these days or memory error?

    Open Disk Utility and repair permissions. Open Finder, press Option key, select Go > Library, open Preferences and delete com.apple.finder.plist. Finally, restart. http://www.reedcorner.net/understanding-upgrade-nightmares/

  • Photoshop Elements 10 is extremely slow to start

    Photoshop Elements 10 is extremely slow to start. It needs three minutes after starting before any sign of the program appears.
    Then another three minutes passes before the program will respond to a mouse click.
    While the program is in use, the display frequently freezes at seemingly random times and is unresponsive for a varying period of time.
    It has always been this way since installation.
    I read in the community forums that starting the Photoshop editor directly with a shortcut will bypass the start screen and eliminate the problem. Tried it--it does not.
    I also in the community forums that the program is trying to connect with photoshop.com which no longer exits. The fix offered was to disconnect from the Internet. This is not acceptable.
    I will not be upgrading to a newer version as a fix (as someone suggested) unless it is offered without additional cost.
    Is there any sort of work around if not an actual fix for this problem?
    Photoshop Elements Version Installed: Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
    All updates are installed as of February 13, 2014
    OS: Operating System: Windows 7 64-bit, Version: 6.1
    Hardware: Dell Optiplex 780
    Intel CPU Family: 6, Model:7
    Processor speed: 2926 MHz
    Built-in memory: 3932 MB
    Free memory: 2072 MB
    Memory available to Photoshop: 3255 MB
    Memory used by Photoshop: 70 %

    Sorry, I guess I should have said "One of the suggestions offered was to disconnect from the Internet." As it happens, that works. Not using the welcome screen does nothing.
    With the Internet connected, Photoshop 10 needs better than 6 minutes to start up and be ready to use. Starting while disconnected from the Internet requires less than 10 seconds.
    This is a work around, but it is not a fix. Temporary and unacceptable.
    Uninstall, reinstall? Been there, done that, too many times.
    I was hoping for something different that would either fix the problem or upgrade a faulty product for users who deserve better.
    After the customer has purchased a product in good faith, what sort of business practice recommends that the user disable a product feature in order to use it?

  • Premeire Elements 12 slow to start?

    Re: Very slow package start up.
    We have 6 licence's for premeire elements on site. However, sometimes they can take up to 6-7 minutes to start. (thats just the package, nothing else).
    Although in my office I get a start up time of around 5-7 seconds usually.
    Does the adobe try doing licence look-ups on every start up or do we have a different problem!,
    and is there any way to get a faster opening for the elements package. ?
    Thanks

    Ian_tech
    With your Premiere Elements 12, I will be particularly interest in whether you are trying to run it on Windows 7, 8, or 8.1 64 bit. So looking forward to your answers to SG's questions in that regard.
    But, I would ask these additional specific questions about the symptoms....
    a. you cite slow startup
    b. what about time that it takes the program to close after you have closed the program.
    c. prolonged times to view new project dialog after you go the route File Menu/New/Project
    In spite of the slow startups (6 to 7 minute...), after the program/project finally opens, is the performance related to import, editing, and export affected?
    Looking forward to your answers to SG's questions. Then for mine if you have time when your discussions with him are concluded.
    Thanks.
    ATR

  • Hp laptop is slow to start checked for virus none found

    hp laptop is slow to start checked for virus none found

    Hi,
    Shut down the notebook.  Tap away at the esc key as you start the notebook to enter the Start-up Menu.  Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory.  Post back with the details of any error messages.
    If both the above tests pass, try the following.
    From the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'.  In to the prompt type the following command and hit enter.
    sfc /scannow                 ( note that there is a space between sfc and the / )
    Let the process complete, then type exit and hit enter.
    Next, click the Start Menu, click Computer, left click Local Disc C once to highlight it, right click Local Disc C and select Properties.  Click the Tools tab and then click the button to 'Check the Drive for Errors'.  In the following window make sure both boxes are ticked and then click Start.  Agree to schedule the check at the next system restart and then restart the notebook - this process can take several hours to complete before loading back into Windows.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • My Mac is slow to start up or wake up.  Any suggestions?

    I have a MacBook Pro OS X Yosemite 10.10.1 that is very slow to start-up or wake from sleep mode. Other than 1200-1500 pictures it really doesn't have much saved on it, nor does it have any non-standard programs on it.
    When I got my computer I installed Microsoft Office for Mac, and that made it really slow so I DELETED the program, which was quite a task.  Once I did the speed improved significantly, but now it is slow again.
    Why is it slow so and what can I do to improve the speed?
    THANKS!!!

         Reset PRAM.  http://support.apple.com/kb/PH18761
         Reset SMC.     http://support.apple.com/kb/HT3964
       Choose the method for:
       "Resetting SMC on portables with a battery you should not remove on your own".
         Start up in Safe Mode.  http://support.apple.com/kb/PH14204?viewlocale=en_US
      Best.

  • Slow iTunes start-up

    Hello,
    I am having some issues with my iTunes. Everything works fine except the start up. When i click the iTunes icon to start it up. It takes anywhere from 4 to 6 minutes, yes MINUTES to start; sometimes more.
    I have a great computer! I run everything on maximum settings as well as running games on ultra settings without any problems. ONLY iTunes is painfully slow at starting up.
    NOTE: It doesn't matter whether my ipod is connected or not.
    PC Specs:
    Windows 7 Home Premium 64-bit (6.1, Build 7600)
    Intel(R) Core(TM) i7 CPU 975 @ 3.33GHz (8 CPUs), ~3.3GHz
    4096MB RAM
    ATI Radeon HD 5800 Series

    Hi,
    I had the same problems. Sometimes fast start , sometimes slow start of iTunes. I found out what difference is. First a little context info
    I use iTunes with an iPhone to synch everything including the Microsoft Exchange server (email) from work.
    Now this is the culprit. iTunes does a perfect job synching everything in both directions. As soon as you connect the iPhone it will pop up and start synching.
    So when doesnt it popup and takes a few minutes?
    When I am outside the business network and there is no connection to the Exchange server. iTunes seems to try and connect to it (as it should), but the time-our for it seems to be long. If I attached the phone to my laptop and see that I am waiting, I just forgot to setup the VPN connection to work. As soon as I open that connection, iTunes can find the Exchange server right away and opens up.
    So in short. Synching with Microsoft Exchange while that server is not available causes a 5 minute delay in startup. Connect to the exchange through vpn or local network at work gives an instant startup.
    iTunes version: always the latest, so the fix mentioned in 2nd post does not apply to this situation

  • MacBook Pro (15-inch, Late 2011) running slow on start-up

    Hi,
    My MacBook Pro (15-inch, Late 2011) seems to be running very slow on start-up and when i have more than two applications open. This only seems to have become apparent following my upgrade to Yosemite. I read a few blogs and i decided to disable FileVault in the hope that it would speed up, but it has not. I have also verified and repaired permissions of the HD and start-up disk in Recovery mode. Can anyone help?
    EtreCheck version: 2.1.8 (121)
    Report generated 3 March 2015 12:40:16 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (15-inch, Late 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,2
        1 2.2 GHz Intel Core i7 CPU: 4-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 132
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1680 x 1050
        AMD Radeon HD 6750M - VRAM: 512 MB
    System Software: ℹ️
        OS X 10.10.1 (14B25) - Time since boot: 4:7:9
    Disk Information: ℹ️
        TOSHIBA MK7559GSXF disk0 : (750.16 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 749.30 GB (541.25 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. Apple Internal Keyboard / Trackpad
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Problem System Launch Agents: ℹ️
        [killed]    com.apple.CallHistoryPluginHelper.plist
        [killed]    com.apple.coreservices.appleid.authentication.plist
        [killed]    com.apple.EscrowSecurityAlert.plist
        [killed]    com.apple.icloud.fmfd.plist
        [killed]    com.apple.security.cloudkeychainproxy.plist
        5 processes killed due to memory pressure
    Problem System Launch Daemons: ℹ️
        [killed]    com.apple.ctkd.plist
        [killed]    com.apple.icloud.findmydeviced.plist
        [killed]    com.apple.ifdreader.plist
        [killed]    com.apple.nehelper.plist
        [killed]    com.apple.wdhelper.plist
        5 processes killed due to memory pressure
    Launch Agents: ℹ️
        [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.google.keystone.agent.plist [Click for support]
    User Login Items: ℹ️
        Moom    Application  (/Applications/Moom.app)
        Google Drive    Application  (/Applications/Google Drive.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Click for support]
        AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
        JavaAppletPlugin: Version: Java 8 Update 25 Check version
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
        Java  [Click for support]
        Perian  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 749.30 GB Disk used: 208.05 GB
        Destinations:
            Data [Network]
            Total size: 997.71 GB
            Total number of backups: 2
            Oldest backup: 2015-03-02 13:22:43 +0000
            Last backup: 2015-03-02 19:11:38 +0000
            Size of backup disk: Adequate
                Backup size 997.71 GB > (Disk used 208.05 GB X 3)
    Top Processes by CPU: ℹ️
             8%    WindowServer
             5%    mds
             1%    hidd
             1%    ocspd
             0%    Moom
    Top Processes by Memory: ℹ️
        189 MB    mds_stores
        142 MB    com.apple.WebKit.WebContent
        129 MB    Safari
        116 MB    Opera
        103 MB    Finder
    Virtual Memory Information: ℹ️
        245 MB    Free RAM
        1.52 GB    Active RAM
        1.30 GB    Inactive RAM
        1.07 GB    Wired RAM
        16.09 GB    Page-ins
        345 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 3, 2015, 08:31:59 AM    Self test - passed
        Mar 2, 2015, 05:28:19 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/cloudd_2015-03-02-172819_[reda cted].crash
        Mar 2, 2015, 10:28:56 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/Google Earth_2015-03-02-102856_[redacted].crash
        Mar 2, 2015, 10:28:23 AM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-02-102823_[ redacted].cpu_resource.diag [Click for details]
        Mar 2, 2015, 10:26:39 AM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-02-102639_[ redacted].cpu_resource.diag [Click for details]
        Mar 2, 2015, 10:18:19 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-101819_[re dacted].crash
        Mar 2, 2015, 10:18:18 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-101818_[re dacted].crash
        Mar 2, 2015, 10:15:51 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-101551_[re dacted].crash
        Mar 2, 2015, 10:15:49 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-101549_[re dacted].crash
        Mar 2, 2015, 09:35:09 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-093509_[re dacted].crash
        Mar 2, 2015, 09:35:07 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-093507_[re dacted].crash
        Mar 2, 2015, 09:31:16 AM    /Library/Logs/DiagnosticReports/???_2015-03-02-093116_[redacted].cpu_resource.d iag [Click for details]
        Mar 2, 2015, 09:30:38 AM    /Library/Logs/DiagnosticReports/???_2015-03-02-093038_[redacted].cpu_resource.d iag [Click for details]
        Mar 2, 2015, 09:16:53 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-091653_[re dacted].crash
        Mar 2, 2015, 09:16:52 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-02-091652_[re dacted].crash
        Mar 1, 2015, 07:57:37 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-195737_[re dacted].crash
        Mar 1, 2015, 07:57:28 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-195728_[re dacted].crash
        Mar 1, 2015, 02:08:32 PM    /Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-01-140832_[redacted].hang
        Mar 1, 2015, 02:06:11 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-140611_[re dacted].crash
        Mar 1, 2015, 02:06:04 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-140604_[re dacted].crash
        Mar 1, 2015, 01:58:27 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-135827_[re dacted].crash
        Mar 1, 2015, 01:58:25 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-135825_[re dacted].crash
        Mar 1, 2015, 01:11:42 PM    /Library/Logs/DiagnosticReports/iTunes_2015-03-01-131142_[redacted].cpu_resourc e.diag [Click for details]
        Mar 1, 2015, 12:35:56 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-123556_[re dacted].crash
        Mar 1, 2015, 12:35:55 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-123555_[re dacted].crash
        Mar 1, 2015, 12:27:43 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-122743_[re dacted].crash
        Mar 1, 2015, 12:27:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-122742_[re dacted].crash
        Mar 1, 2015, 11:02:54 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-110254_[re dacted].crash
        Mar 1, 2015, 11:02:53 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/mdworker_2015-03-01-110253_[re dacted].crash
    Thanks for your help.

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • My Apple iPad 3 is less than 6 months old - purchased in March of 2012.  I believe it already needs a new battery.  It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in.  Please advise - it is very annoying.n.

    My Apple iPad 3 is less than 6 months old - purchased in March of 2012.  I believe it already needs a new battery.  It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in.  Please advise - it is very annoying.

    Take it to Apple Store. You are covered under your 1 year warranty.

  • My mac is very slow at start up and throwing out its original boot disc, so i cant carry out any disk utility repair, any help

    Hey guys, i have tried all the help i have so far been given but am still facing the same problem,
    my mac is slow at start
    i have tried to reboot with the os x 10.6 dvd but its just throwing it out
    causing more and more frastration
    can some one help

    Hello,
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.
    Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
    /sbin/fsck -fy
    Repeat until it shows no errors fixed.
    (Space between fsck AND -fy important).
    Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
    http://docs.info.apple.com/article.html?artnum=106214

  • My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBoo

    My Macbook pro Early 2008 is randomly slow at starting up and when I am backing up to my time capsule I am receiving the following message 'Time machine could not complete the backup. '' ''The backup disk image ''/Volumes/name time capsule/ my name MacBook Pro (4).sparsebundle'' could not be accessed (error-1).
    Problem started after deleting parrell desktop and window7 ?
    Please help?

    Look at the more like this column on the right.. this is the most frequently asked question in this discussion area.
    Reboot the TC.. restart the whole network if the simple reboot did not work.. start in order. modem.. router/TC.. clients. 2min gap.
    Read C12 here. http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for

  • Report- not displaying some records in the report

    I have a query say q1 based on the query value. I am getting place holder colums obtained from a procedure. based on one of the place holder columns i want to display the data say i have place holder column err_ind if it y. i don't want to display th

  • Batch creation at the time of order creation & confirmation on the batch.

    Hi all, My client's requirement is while creation of the production order of say 100 pcs, system should create 4 batches, each of 25 (this might be different every time) of that order & also the confirmation (CO11) should be done on those batches. Al

  • WHOLE SYSTEM FREEZING UP!!!

    Firstly, I have the latest nod32 installed, fully upto date. Spybot is also installed and is latest version. All my drivers are also upto date. Ok, I'm really at a loss here. I even upgaded to the CS4 trial to see if it would fix it.(from CS3). (I un

  • Getting a Runtime Exception while inserting value in MSAccess 2000

    I am using below mentioned code to insert values in MSAccess 2000 which having table structure as mentioned below:- Field Name Data Type TodaysDate Date/Time Cart ID Number Client Name Text Team & Segment Text Duration Number Tape ID Text Start Date

  • How/where to download trial of PE13

    I own PE12 and would like to upgrade it but bere doing so I have been trying, invain, to find the link to download the trial version of PE13, in order to test it. If I select in products window the PE 13 and I click on TRIAL I am taken to the page of