Slow RDP (refresh rate) to Server 2008 R2 from Windows 8.1

Hi everyone,I have a user connecting to a Server 2008 R2 RDP server. He can connect no problem, but there is quite a bit of latency which I do not understand. He pings to the server at around ~60ms. I have another server on the same site (Server 2012 R2) and he does not experience the same latency. I've connected another Windows 8.1 computer to the Server 2008 R2 box and CANNOT replicate the issue.He appears to be the only one.I've temporarily disabled his AV, windows firewall, disabled local visualization settings (and on the server). I've configured RDP to 56k settings in the Experience tab which changed absolutely nothing.I've also run the netsh commands everyone seems to suggest with this issue.Any recommendations or things to try?EDIT: I've also updated his wireless drivers. I don't have the laptop in hand to try the local...
This topic first appeared in the Spiceworks Community

I need to upgrade the database size to >=100 GB to restore a database. I tried all described instructions including Hotfixes and possible upgrade to Enterprise or Standard EditionBhoomin Pandya
So what advise do you need. Did you tried upgrading first ? Did you faced any error
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Similar Messages

  • Installing RDP 8.1 on Server 2008

    I've installed the prerequisite and update for RDP 8 on a Server 2008 R2 virtual server. When I look at the About information "Remote Desktop Protocol 8.0 supported". However, the gpedit option isn't there under:
    Computer Configuration\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Remote Session Environment
    What else needs installed?
    Thanks!

    Hi,
    It is in both the KB article as well as the blog, but it is not as clear as it could be.  Excerpts:
    KB 2592687, one example:
    From the Enable the update on the client section, "To enable RDP 8.0 on a remote computer that's running Windows 7 SP1, follow these steps: Note The following instructions are applicable only to remote computers that are running Windows
    7 SP1."
    From the blog article:
    "Are the RemoteFX and RDP 8.0 enhancements available for Windows Server 2008 R2 Remote Desktop Session Host?
    No, the RemoteFX and RDP 8.0 enhancements are not available for Windows Server 2008 R2 Session Host. However, a Windows Server 2008 R2 computer acting as a client access device will still get the Remote Desktop Connection 8.0 client and thereby get
    the benefits listed in the ‘client access devices’ section earlier."
    -TP

  • Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine

    Hi Team,
    Error while installing SQL Server 2008 R2 in Windows 7 SP1 machine. I can confirm this machine has .Net
    Feature enabled and with Latest version.
    TITLE: Microsoft SQL Server 2008 R2 Setup
    The following error has occurred:
    Error 25541.Failed to open XML file C:\Windows\Microsoft.NET\Framework\v2.0.50727\CONFIG\machine.config, system error: -2147024786
    Regards,
    Muthukumar.S.P.

    Hi,
    Can you follow workaround mentioned in below msdn blog
    http://blogs.msdn.com/b/astebner/archive/2007/11/01/5826719.aspx
    As per the blog you have to open the msi log files which must be located at
    C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
    In MSI log files search for the error mentioned in blog. Below link will help you read setup log files
    http://msdn.microsoft.com/en-gb/library/ms143702%28v=sql.105%29.aspx
    PS: Please read links carefully and patiently and if it does not solves issue please post summary.txt file and details.txt file on skydrive for analysis
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • Windows Server 2008 r2 as Windows XP Pro 2.0 (Issue: 1)

    Windows Server 2008 r2 as Windows XP Pro 2.0 (Issue: 1)
    Flabbergasted at the sheer level of idiocy required to use Windows 7 Ultimate or Windows 8.1 Pro I remain a stead fast winXPro user to this day (mid-2014) and beyond. My i3-3225 XP machine turns 2000+ Passmark system scores and excels at everything the
    way we all use to, before Microsoft's policy of operating systems built for idiots, by idiots came to pass. Then as a sheer act of desperation I tried Server 2008 r2... is it the OS I have dreamed of? Short of an XP Theme conversion kit I have questions...
    Problem 1) Windows Explorer: In the folder directory left pane... the little [+] box next to the folder names flash on and off each time I use the right window pane. Can I by any and all means make them not do this, remain visible, sit still; like XP used
    to do?
    Problem 2) Start Menu: This popup is a double wide window pane, two columns of annoyance. Can I reduce this to a single wide by removing the right pane entirely by any and all means. I have removed every button from the right pane, but it still exists, it still
    has a default picture user icon and says Administrator.
    Problem 3) If specific programs/drivers are unavailable for this OS 2008 r2, I presume win 7 x64 by default work.
    Problem 4) Passmark benchmarking software tested my system, with windows 8.1 I had a processor score of 9,400, but server 2008 r2 put out only 8,100 in repetitive tests. Why the slowdown? I only use this as an XP like os, no actual server stuff, should i disable
    something?

    Windows Server is not intended to replace Windows XP. i would advice to try Windows 7 or 8 instead.
    1) I cannot picture what you mean. ther is a setting to define wheter the left pane should follow if you browse in the right one. Tools- folder options- general 'navigation pane'
    2)Windows vista/2008 is the last version that had a (optional) single pane start menu. if you don't like the current one, ther is third party software available to replace the start menu
    3) yes, these will be ok
    4) 2008 R2 is a server OS and is out-of-the bow not optimized for foreground applications. Windows 8.1 on the other hand is a newer and more performant OS optimized for client usage. in both cases a lot of performance gain is to be expected by selecting
    the right drivers, disabling or unisntalling unneeded software and windows features, disabling unneeded services. I would recommend to (a least) go to computer properties -advanced settigns- advanced and set 'adjust for best perfomance of" to programs (instead
    of background services)
    MCP/MCSA/MCTS/MCITP

  • How to upgrade Windows Server 2008 Foundation to Windows Server 2008 Standard

    I have a Dell server with Windows Server 2008 Foundation installed. I am now on a larger network which has their own servers for authentication and the Windows Server 2008 Foundation will not let join a domain with more than 15 users. I was told that I needed
    to upgrade Windows server 2008 foundation to Windows server 2008 Standard and that process can be done "in place" but I can't find how do do it. I called Dell and they said they basically said they didn't know what I was talking about.
    How do I  do this?

    According to the first one you can perform an in-place upgrade.
    Introduction to Windows Server 2008 Foundation
    http://technet.microsoft.com/en-us/library/dd459191(WS.10).aspx
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]

  • Can i install windows server 2008 r2 under Windows Small Business Server - Premium

    I have purchased Windows Small Business Server 2008 - Premium and i want to know if i can install Windows Server 2008 R2 and activate the same under the same license.
    Also if there is a link to download the ISO file of the server.

    hello,
    with the SBS 2008 premium Edition you have the Windows Server 2008 Standard but NOT the 2008 R2 Version.
    for installing the second Windows Server 2008 includes on the Premium Edition you do not Need to download a Iso file.
    on this link:
    http://technet.microsoft.com/en-us/library/cc794696(v=ws.10).aspx is mentioned the following:
    To install Windows SBS 2008 Premium, do the following:
    Install Windows SBS 2008 Standard.
    For installation instructions about how to install Windows SBS 2008 Standard, see the
    Windows Small Business Server Installation Guide at http://go.microsoft.com/fwlink/?LinkID=125717.
    Install the second server by using Windows Server 2008, included with Windows SBS 2008 Premium, and then join it to the Windows SBS 2008 domain.
    For second server installation information, see
    Implementing a Second Server on Your Windows Small Business Server 2008 Network at http://go.microsoft.com/fwlink/?LinkId=125734.
    thanks
    diramoh

  • SQL Server 2008 Installation on Windows 7

    I tried to install SQL Server 2008 on a Windows 7 Home Premium 64 bit (Enterprise Edition Trial Edition). The system check was ok and the installation started successfully but at the end there were some errors. In the logfile there were stacktraces describing failures trying write operations on the registry. What can I do to install SQL Server 2008 on my operating system?

    Hello ChunSong Feng,
    thanks for your advice. Herewith I send you the text parts from detail.txt with the detailed error description. The whole file is too big to send as content.
    Thanks in advance:
    2009-11-17 21:05:10 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned:  D:(A;CI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1028)
    2009-11-17 21:05:10 Slp: Prompting user if they want to retry this action due to the following failure:
    2009-11-17 21:05:10 Slp: ----------------------------------------
    2009-11-17 21:05:10 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2009-11-17 21:05:10 Slp: Inner exceptions are being indented
    2009-11-17 21:05:10 Slp:
    2009-11-17 21:05:10 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
    2009-11-17 21:05:10 Slp:     Message:
    2009-11-17 21:05:10 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:05:10 Slp:     Data:
    2009-11-17 21:05:10 Slp:       WatsonData = Microsoft SQL Server
    2009-11-17 21:05:10 Slp:       DisableRetry = true
    2009-11-17 21:05:10 Slp:     Inner exception type: System.UnauthorizedAccessException
    2009-11-17 21:05:10 Slp:         Message:
    2009-11-17 21:05:10 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:05:10 Slp:         Stack:
    2009-11-17 21:05:10 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
    2009-11-17 21:05:10 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
    2009-11-17 21:05:10 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
    2009-11-17 21:05:10 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
    2009-11-17 21:05:10 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2009-11-17 21:05:10 Slp: ----------------------------------------
    2009-11-17 21:05:28 Slp: User has chosen to cancel this action
    2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
    2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
    2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
    2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
    2009-11-17 21:05:44 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:05:45 Slp: Watson bucket for exception based failure has been created
    2009-11-17 21:05:45 SQLBrowser: SQL Server Browser Install for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' failed with cancel exception: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
       bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
       bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
       bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
       bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
       bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
       --- Ende der internen Ausnahmestapelüberwachung ---
       bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
       bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
       bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig).
    2009-11-17 21:05:45 SQLBrowser: The last attempted operation: Der '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$UTAS-URMEL])'-Zugriffssteuerungseintrag wird dem Registrierungsschlüssel 'SOFTWARE\Microsoft\Microsoft SQL Server' in der 'Wow6432'-Sicht hinzugefügt, um den SQL Server Browser-Dienst zu konfigurieren..
    2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
    2009-11-17 21:05:45 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
    2009-11-17 21:05:45 Slp: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:05:45 Slp:    bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
    2009-11-17 21:05:45 Slp:    bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2009-11-17 21:05:45 Slp:    --- Ende der internen Ausnahmestapelüberwachung ---
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.Install(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
    2009-11-17 21:05:45 Slp:    bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
    2009-11-17 21:05:45 Slp: Ausnahme: Microsoft.SqlServer.Configuration.Sco.ScoException.
    2009-11-17 21:05:45 Slp: Quelle: Microsoft.SqlServer.Configuration.Sco.
    2009-11-17 21:05:45 Slp: Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
    2009-11-17 21:05:45 Slp: Innere Ausnahme:
    2009-11-17 21:05:45 Slp:  Ausnahme: System.UnauthorizedAccessException.
    2009-11-17 21:05:45 Slp:  Quelle: mscorlib.
    2009-11-17 21:05:45 Slp:  Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
    2009-11-17 21:05:45 Slp: Completed Action: SqlBro
    2009-11-17 21:05:50 Slp: Prompting user if they want to retry this action due to the following failure:
    2009-11-17 21:05:50 Slp: ----------------------------------------
    2009-11-17 21:05:50 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2009-11-17 21:05:50 Slp: Inner exceptions are being indented
    2009-11-17 21:05:50 Slp:
    2009-11-17 21:05:50 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
    2009-11-17 21:05:50 Slp:     Message:
    2009-11-17 21:05:50 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:05:50 Slp:     Data:
    2009-11-17 21:05:50 Slp:       WatsonData = 100
    2009-11-17 21:05:50 Slp:       DisableRetry = true
    2009-11-17 21:05:50 Slp:     Inner exception type: System.UnauthorizedAccessException
    2009-11-17 21:05:50 Slp:         Message:
    2009-11-17 21:05:50 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:05:50 Slp:         Stack:
    2009-11-17 21:05:50 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
    2009-11-17 21:05:50 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
    2009-11-17 21:05:50 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
    2009-11-17 21:05:50 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
    2009-11-17 21:05:50 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2009-11-17 21:05:50 Slp: ----------------------------------------
    2009-11-17 21:05:57 Slp: User has chosen to cancel this action
    2009-11-17 21:05:58 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
    2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
    2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
    2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
    2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:06:17 Slp: Watson bucket for exception based failure has been created
    2009-11-17 21:06:17 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
    2009-11-17 21:06:17 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned:  D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)
    2009-11-17 21:06:17 Slp: Prompting user if they want to retry this action due to the following failure:
    2009-11-17 21:06:17 Slp: ----------------------------------------
    2009-11-17 21:06:17 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2009-11-17 21:06:17 Slp: Inner exceptions are being indented
    2009-11-17 21:06:17 Slp:
    2009-11-17 21:06:17 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
    2009-11-17 21:06:17 Slp:     Message:
    2009-11-17 21:06:17 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:06:17 Slp:     Data:
    2009-11-17 21:06:17 Slp:       WatsonData = SSIS
    2009-11-17 21:06:17 Slp:       DisableRetry = true
    2009-11-17 21:06:17 Slp:     Inner exception type: System.UnauthorizedAccessException
    2009-11-17 21:06:17 Slp:         Message:
    2009-11-17 21:06:17 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:06:17 Slp:         Stack:
    2009-11-17 21:06:17 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
    2009-11-17 21:06:17 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
    2009-11-17 21:06:17 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
    2009-11-17 21:06:17 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
    2009-11-17 21:06:17 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2009-11-17 21:06:17 Slp: ----------------------------------------
    2009-11-17 21:06:24 Slp: User has chosen to cancel this action
    2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
    2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
    2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
    2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
    2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
    2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:06:47 Slp: Watson bucket for exception based failure has been created
    2009-11-17 21:06:47 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100\SSIS' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
    2009-11-17 21:06:47 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib
    2009-11-17 21:06:47 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned:  D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)(A;CI;KR;;;LU)(A;CI;KR;;;MU)
    2009-11-17 21:06:47 Slp: Prompting user if they want to retry this action due to the following failure:
    2009-11-17 21:06:47 Slp: ----------------------------------------
    2009-11-17 21:06:47 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
    2009-11-17 21:06:47 Slp: Inner exceptions are being indented
    2009-11-17 21:06:47 Slp:
    2009-11-17 21:06:47 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
    2009-11-17 21:06:47 Slp:     Message:
    2009-11-17 21:06:47 Slp:         Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:06:47 Slp:     Data:
    2009-11-17 21:06:47 Slp:       WatsonData = Perflib
    2009-11-17 21:06:47 Slp:       DisableRetry = true
    2009-11-17 21:06:47 Slp:     Inner exception type: System.UnauthorizedAccessException
    2009-11-17 21:06:47 Slp:         Message:
    2009-11-17 21:06:47 Slp:                 Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
    2009-11-17 21:06:47 Slp:         Stack:
    2009-11-17 21:06:47 Slp:                 bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
    2009-11-17 21:06:47 Slp:                 bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
    2009-11-17 21:06:47 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
    2009-11-17 21:06:47 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
    2009-11-17 21:06:47 Slp:                 bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
    2009-11-17 21:06:47 Slp: ----------------------------------------
    2009-11-17 21:06:52 Slp: User has chosen to cancel this action

  • Is it possible to install Microsoft SQL Server 2008 Express on windows server 2012 (not R2) ?

    I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
    I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
    So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?

    I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
    I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
    So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
    Yes you can install SQL server 2008 express on windows 2012 OS see below link
    http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Essential event viewer bugs with "Forwarded Events" log in Windows Server 2008 R2 and Windows 7

    To my general experience, Windows event viewer is one of the most problematic, faulty management tools in the case of extensive use of its more sophisticated capabilities. The sole description as well as reproduction of some entangled failures would require
    remarkable effort.
    With the "Forwarded Events" log however, the situation becomes particularly worse in that even simple functionality fails and workarounds are difficult to find. That’s what I’ll describe here in order to share my experience with interested users.
    For precision: I’ve extensively used event viewer on a German Windows Server 2008 R2 SP1 (Windows SBS 2011 Standard SP1). The bugs I found on that system, I could reproduce on a German Windows 7 Professional 64-Bit SP1, too.
    Problem 1: Failure of even simple event filtering
    To reproduce this problem, execute these steps on a test machine with any of the two OS mentioned above:
    (i) To prepare log contents, do either of the following:
    (a) populate some events to your local "Forwarded Events" log (most simply by subscribing events from other logs of the same machine; stop subscription if you have collected some events)
    Or
    (b) copy a non-empty log file "ForwardedEvents.evtx" from another machine (with any of the two OS mentioned above) to your test machine and open the file in event viewer.
    (ii) Navigate to your "Forwarded Events" test log and open the filtering dialog. In the "Includes/Excludes Event IDs" field, type: 1-9000. Click OK.
    (iii) Look at the results pane: Surprise, 0 Events! Do you really have no event IDs between 1 and 9000 in your test log?
    (iv) Another example, if you have forwarded security events in your test log: Clear filter, if any previous filter is in place. Open the filtering dialog. In "Keywords" sub-dialog, choose "Audit Success". Click OK.
    (v) Look at the results pane: Surprise, 0 Events! Do you really have no successful security monitoring events in your test log?
    I’ll finish here. If you have a rich variety of events in your test log available, let your imagination run wild to test around. Finally include some simple manually created or modified XPath filters on the XML tab of the filtering dialog. I promise, you’ll
    find a lot of additional strange results.
    Problem 2: Cannot save manually selected events to .evtx file
    Navigate to your "Forwarded Events" test log. In the results pane, select one or more events by highlighting them by mouse clicks. In context menu, choose "Save selected events". In the "save as" dialog, choose file type *.evtx
    and save your file. Open the newly created file in event viewer. Result: Surprise, no events inside the new file!
    Have more fun with forwarded events
    Helmut

    Did you mean that right click Forwarded Event and select "Filter Current Log..."? Since I can filter correct event vai the "Filter Current Log..." in my Lab environment.
    Hi Justin,
    yes, I mean "Filter Current Log ... " (in my German systems: "Aktuelles Protokoll filtern ... ").
    What do you mean with "my Lab environment" exactly?
    In the meantime, I performed additional tests. I copied the "ForwardedEvents.evtx" test file from Server 2008 R2 resp. Windows 7 to
    (i) German Windows 8 Pro 64-Bit RTM
    (ii) German Windows 8.1 Pro 64-Bit, up-to-date
    in order to view and filter the file there.
    Results: Same event viewer problem on Windows 8 RTM, but correct behavior on Windows 8.1!
    Best regards, Helmut

  • Slow network with "Small Business Server 2008"

    Sinds upgrading to a "Small Business Server 2008", the copy speed of a file dropped from >18 Mb/s (SBS 2003) to <1 Mb/s (SBS 2008).
    Other systems (Vista, XP) show no slowing down.
    I searched the internet but found no solution.
    Please help.
    Fulco

    I forgot: copying to SMB share is slow
    Reading from SMB share is >20 Mb/s (SBS2008 and SBS2003)
    Fulco

  • Slow Printing on RDS on Server 2008 R2

    We have resently upgraded from a 2000 Terminal server to a 2008 R2 Remote desktop Server. The clients are running XP Pro and have SP3 installed and .net Framework 3.5 SP1.
    Users are complaining that printing is very slow on the new system and there is a noticable difference when printing.
    We are using the Windows Easy Print to redirect users printers, we do not have any drivers or printers installed on the RDS itself as we want to soley use Easy Print as we have a number of home users all with different printers and most do not have 64bit
    drivers available.
    I have disabled TCP Chimney Offload, RSS and Receive Windows Auto-Tuning Level on the server but this has had no effect.
    Please can you advise on the best course of action to improve printing speeds.

    Hi,
    Easy Print is a new feature since Windows Server 2008 Terminal Services. In the process of Easy
    Print, the Easy Print universal driver acts as a proxy and redirects all the UI calls to the driver on the client. The performance of the feature quite depends on the related drivers which supports Easy Print. In such a case, please consider to check the following
    two factors:
    ·          Check the official website of the printer and install the most updated printer driver supporting
    Easy Print for your printer.
    ·          Update the driver for the network adapter on both the server and the client side.
    Besides, here is a known issue described on the following KB article and please take it as reference:
    FIX: After you apply hotfix 954744, printing performance may be significantly slower when
    you print documents by using Terminal Services Easy Print
    http://support.microsoft.com/?id=954743
    Wilson Jia
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]
    This posting is provided "AS IS" with no warranties, and confers no rights. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can
    be beneficial to other community members reading the thread. ”

  • HTTPs Sites Slow to load on Single Server 2008 R2 Box

    Hello All,
    I have an issue with our new server where https sites are slow to load or do not load at all in IE 9 or Google Chrome. Using Firefox any page loads fine. I have tested many things, reinstalled IE, downgraded to IE8, upgraded to IE10, checked
    the forums, tested SSL settings and still get the same issue.
    For example if I open IE, navigate to google.com I will get a "waiting for google.com" that will sometimes take 5 minutes to load; the same behavior is noticed on Google Chrome but not Firefox. I did notice that if I installed google.com
    SSL certificate that the page would load normally. I have tested the same method on another Server 2008 R2 box with no issues. I am not sure what the issue could be. Any ideas or direction would be greatly appreciated since this is directly affecting business
    for my client.
    Thank you!

    As Google Chrome is using some IE settings, it might be normal to have a similar behavior.
    You can try to reset IE settings: http://support.microsoft.com/kb/923737/en-us
    If this does not help, you can ask them in IE forum: http://social.technet.microsoft.com/Forums/ie/en-US/home?category=internetexplorer
    This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
    Get Active Directory User Last Logon
    Create an Active Directory test domain similar to the production one
    Management of test accounts in an Active Directory production domain - Part I
    Management of test accounts in an Active Directory production domain - Part II
    Management of test accounts in an Active Directory production domain - Part III
    Reset Active Directory user password

  • Server 2008 R2 and Windows 7. User share shows My Documents instead of use name.

    Windows Server 2008 R2
    This didn't startseeing this issue until we started using Windows 7 in our environment. There is a share with all the users folders in them. Because Windows 7 writes a desktop.ini file in each folder, the folders appear to be My Documents to the technicians.
    I have been blocking the file with file screening but I feel there has to be a better method.
    I don't like having to restrict file creation for these folders. Is there a way to prevent windows from reading in the folder until the folder has been opened? Or is file screening the best method to use. I feel like file screening may be slowing down logins.
    The only other method I have found is to create a docs folder inside of the users folder and map to that docs folder. But that would mean moving around 10,000 - 30,000 user folders.
    Any advice would be great.
    Thank you
    Charles

    We have the same, and it is by design. We uncovered this article whilst researching: http://support.microsoft.com/kb/947222
    There's nothing to stop the admins typing the route manually though as even though it displays my documents, the folder still has the name of the user.
    CRM Advisor

  • How to install SQL server 2008 express on Windows server 2008 R2 standard OS

    Hi,
    I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
    but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with  Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
    Regds

    Hello,
    Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
    Please download QL Server 2008 Express with SP1 included from the following link:
    http://www.microsoft.com/en-us/download/details.aspx?id=25052
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • SQL Server 2008 R2 on Windows 2012 R2

    It appears I cannot install SS2008 R2 on WS2012 R2.  I get the following: 
    'Your version of Microsoft SQL Server (2008 and 2008 R2) isn't compatible with this version of Windows.'
    Can someone please confirm this and when this issue might be resolved?

    Hello,
    Please try a slipstream installation of SQL Server 2008 R2 + SP2 using the following article:
    http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

Maybe you are looking for