Slow rendering and sluggish performance...

just built a new machine for cs3 prod studio. quad core 6850, 4 gig ram, xp sp2, 150 raptor boot, 2 500 wd re2 in raid 0 for data...get the picture, all good stuff. however I'm noticing very long rendering times as well as a slight sluggishness overall in pp cs3. I'm using the onboard raid from my asus p5k as well as the onboard sound. Is that the culprit? One of my other pc's is a qx6800 with same specs however I'm using an areca sata raid card for my data and creative sb x-fi elite for sound. btw I use cineform prospect hd for my editing. now I have a 15min video with very minimal editing, just a few dissolves basically, and it is taking 3 hours to render out the hd avi which takes 10 minutes on the other pc. Also when editing the pc seemed to lag when I performed edits. and when I'd play a clip it would start then the sound cuts out for 5 secs or so then comes back on. So what should I look for 1st? I'm thinking its the onboard raid sucking, but on a brand new install I'm sure there are some tweaks I'm missing. TIA

I started a post titled 'playback lag'. I have exactly the same symptoms you do. Did you find a fix?
My system is running Vista, I was thinking of going back to XP just to solve this issue but I see your running XP.
Is your integrated sound a SoundMAX device?
For some reason I can't find my original post - it looks like it's been deleted?
My original post used to be at
http://forum.adobe.com/webx?13@@.3bc793cc/8
I called Adobe support but they have no idea. I'm not even sure they know what Premiere is.

Similar Messages

  • Dropped Frames and Sluggish Performance since 10.0.6

    Hey all, I am having a rough time since the latest update and I can't seem to figure out what to do next. I am working on a project and it seems that I am stuck on how to proceed. I was working fine with my set up until a couple days ago..
    I have a high end 27' iMac quad i7 3.4 with 16gb of ram and a 1gb graphcis card and mountain lion
    I run my media off of a Drobo S via firewire 800, which had two 3tb bay to start with and just recently added another 2 3 tb drives.
    All of my footage comes from a Canon 7D DSLR and when imported is checked off to optimize media to make things run faster and at better performance.
    After running the latest update it seems that everything in fcpx just crawls. I can play a clip in the event browser just fine, but when I try to play a timeline that I had made just days before it chokes and starts dropping frames immediately. I cant edit with the dropped frames and sluggish reaction that im getting.
    So far I have uninstalled and reinstalled FCPX, and I have accessed my Drobo from my 15" Retina that also has 10.6 and it also crawls at the same snails pace when trying to play my projects.
    These steps have led me to believe that it is not the machine itself, but with no guidance on what else it could be. I know everyone has been saying that the new update has provided great performacne boosts and speed enhancements and stability however i seem to have taken a wrong turn somewhere as I am getting the exact opposite, HELP!
    Mike

    So after thinking more about it I believe I have narrowed down the issue and that is "bad timing". Part of my issue was that I updated to 10.0.6 last night as well as added in 2 new 3tb drives into my drobo. This made it harder for me to narrow my issue. Assuming 10.0.6 is fine, that means that the Drobo would be my problem. After consulting Drobo Support, I have discovered that when adding new drives to a a Drobo the system needs time (lots of it) to re-allocate and index the previously loaded content. So the footage on the Drobo needs time to be moved and placed onto the new drives. Unfortunately this was never explained, nor was there any sort of progress bar to show that this was happeneing.
    In short this means I was trying access my Drobo (where my content is stored) WHILE my Drobo was reallocating and moving that content around internally among its 4 drives. I would like to say this is the exact answer for what has been happening but unfortunately until it is done "allocating" (which Drobo estimates to be 24-36 hours) I will not be able ot fully test this theory.
    Just thought i'd post an update for anyone else who ever gets stuck on Drobo related questions.

  • My solution for: Slow Installs and poor performance

    So up until today, most of anyting on XP or even vista 64 ultimate was taking a very long time to install or copy from one part of the drive to another. Startup would grow longer and game performance was dying and only once ever did reinstalling the OS do anything. No matter what I did, nothing would fix the problem.
    I ran multiple utilities (disk utility, disk warrior, tech tool deluxe, etc) but none said that there was a hardware problem. But this issue I was having (and I know some of you do) was definitely related to the computer. From my experience, I determined that there was no way this mac was perfect.
    So I scheduled a service and repair at my apple store (under warranty). When it was done a few days later, sure enough, I was told that even though the utilities we users can use on our end to diagnose problems didn't find any problems, the hard drive did not pass apple's detailed inspection and was replaced.
    In conclusion, I say that if you are having this problem, run disk utility and if you have the extra protection plan, download the Tech Tool Deluxe that apple provides on the support site. Disk utility may find some permission and disk issues but if Tech Tool doesnt find anything even on the surface scan, take it in to the apple store to have a Genius look at it. If it's not under warranty, it's up to you whether or not you want to spend that money. Overall, my computer both on Leopard and XP now runs just as it should.
    Hope that helps.

    did not work for me

  • Very slow Rendering and Exporting

    Hello,
    I switched to Premiere CS6 from FCP 7 after FCPX came out and haven't looked back. In a lot of ways, it's much better for certain tasks.
    In others, it's not. Initially playing back "red-lined" content worked fine and i was able to view the edit before I committed to render/export.
    Now, I see every 10 frames or so and it skips and stutters. Rendering and exporting times have spiked dramatically over the past month
    for some unknown reason. I have a small prod company and we're using Mac Pro's (8-Core) with min of 16GBs of RAM in each.
    I know there are 101 factors that go into export time, I'm just wondering if anyone if encountering the same issues.
    I just pieced together a 10-min video in FCP7, all ProRes files with minimal cutting and it exported in 2.5 minutes.
    The same project on Premiere was telling me 3 hours. I don't get it.
    Can anyone shed any light on this?
    Thanks
    Dan

    Rendering times are not decided purely on the length of the video.
    The type of effects you have added have more impact.
    Also you cannot always trust the estimated time you are given.
    Have you let it render for about an hour to see whether the estimate drops dramatically?

  • Why is firefox so insanely slow, sticky and sluggish?

    As I'm typing this in firefox the letters are popping on the screen about a good 20 plus seconds later. I like a lot of the features it offers but my God it is so utterly, insanely and maddeningly slow, sticky, sluggish, torpid and might as well toss in the entire thesaurus.

    Hi Greg,
    Have you tried emptying the Firefox cache? If not, In Firefox, from the Tools menu, select Clear Private Data. Make sure Cache is checked, and then click Clear Private Data Now.
    Have you tried trashing the Firefox app and downloading and reinstalling Firefox? Make sure and save your Firefox bookmarks: Bookmarks>Organize Bookmarks, under active bookmark manager, file-export.
    Also, anytime apps slow down even if it's just one, check your free drive space. Select your MacintoshHD icon on your Desktop, press Command + I that will prompt the Get Info window. Click
    the black arrow next to: General so it faces down. You will see: Capacity and Available Minimum drive space shouldn't less than 15% of the total drive. Some users say 10%, some say 20%, so I aim toward the middle. If indeed your short on drive space, transfer files to an external source.
    Also, try running Disk Utility and Repair Disk Permissions.
    Carolyn

  • Progressively slower renders and something else...

    First... does anybody know why FCP renders my timeline over again when I "edit to tape"? I'm rendering everything in the timeline just before I put to tape... and my output settings match the timeline settings...
    also, the renders seem to slow down at the 10-15% mark... if I stop and start the render again it'll go up to 10-15% in seconds...
    No. I'm not rendering the same thing over and over again... and It's mostly motion stuff, with 2,3 sometimes 10 layers of video. I've monitored drive speed, processor usage... everything seems to run fine.
    It's a well maintained and stable system.
    Thanks

    First... does anybody know why FCP renders my timeline over again when I "edit to tape"? I'm rendering everything in the timeline just before I put to tape... and my output settings match the timeline settings...< </div>
    This has been a weird thing about FCP since v1 or v2. I don't think we have ever gotten a satisfactory answer.
    Michael's suggestion to export self-contained, reimport the new movie, and place it in your edit to tape process is pretty much what we've all been doing for several years. When Apple disabled timecode to the dsr-11, many of us started building entire sequences including slate, tone. bars, countdown.
    bogiesan

  • Issue with HP Z820 64GB RAM and dual Quadro K4000's and rendering and playback performance

    I'm having major issues with performance on my system (running windows 8.1. Premiere CC 7.2.2). My friend in the office here has a Mac Pro (2013) with 6 core cpu and dual D500's and I have dual Xeon 2665's and dual K4000's.
    The problem is that he can export twice as fast as me on mercury software and almost 3 times faster on Mercury GPU. He can also add twice as many affects before his system drops frames (using same settings and video file). When I go to GPU-Z my gpu's are hardly working with GPU export selected... with software only my CPU's get to 60% load max whereas his CPU get's to about 84%. Am I missing something? I know the D500's are almost the same as W8000's (and he has two), but dual K4000's shouldn't be that far behind? And how does selecting cpu exporting get him an export time of 6 minutes compared to my 15 minutes when I have a 32 threads to work with??
    Am I doing something wrong? Have I got a setting somewhere that is causing this that I might have missed? Are dual D500's really THAT much better than dual K4000's? AND HOW is my 7k+ machine that much worse than his £3200 mac?
    Please help. I'm losing my mind here!
    Thanks
    Edit - Would just like to add that the video files we are using are pro res 422 and that I have the latest bios and latest nvidia performance drivers

    That HP Z820 should kick the Mac pros butt! For example we run Autodesk Flame systems ( 150k software) on the Z820's with Quadro 6000 cards and they fly. We also had a new mac pro in for testing a few months ago w the dual fire pro cards all decked out and it was crap next the the Z820. Of cource the new MP cant run allot of highend software because of its lack of nvidia support and the firepros lack of open GL but we did run premier and smoke etc  on it for testing. ( Although i thought it looked cool the total lack of exandability and nvida support  was to much so we sent it back). Graphic workstations need PCIe expandability and a choice in GPs.
    Anyhow here are a few observations:
    -Software being used will dertermine the hardware purchased,
    -The dual xeons at the much lower clock speed are meant to work 24/7 like a lamans endurance race, not a sprint race.  Better to get highest frequency xeons.
    -Having dual CPUs with all thoughs cores will only work with a software that is properly mulithreaded, premier is definetly not one of those softwares so you not getting any advantage.
    - the advantage to Quadro cards are much more noticable in 3d tha 2d. If your running Autodesk maya, 3ds max or the recently disscontinued XSI you would be flying compared to the W7000.
    -dual GPU cards do not preform at twice the speed. On average the second card gives about a 10 percent boost.
    -At present ( and as akways) , nividia Quadro drivers are much more uptodate and bug free compared to ATI highend cards. This will inevitably change as openCL over takes openGL, until then Quadros are the clearly superior cards for those with DEEP pockets.
    -I think you would have been far better off with a single Quadro 6000 vs dual K4000s. Also any higher end ATI firepro card would have worked since Premier now uses open CL and no longer needs openGL. Main advantage to Quadro at this point (  besides 3D ) is to be compatible with the most softwares and get the best and most optimized drivers. Firepros will work properly in far fewer softwares at this point but I can see a day over the next few years this may change but not as of yet in 2014. So his W7000 wins this sprint race in this single simple example but in most any other situations your cards will actually work and win. I like saving money like the next guy but I even purchase Quadro cards for my home use and experimenting, but Im not a gamer.
    -FYI: Cuda core count no longer is true measure. For example older Fermi cards worked at twice the frequency than the newer kepler architecture so in effect today you need double ( actually more) the amount of cuda cores to equal the older cards. Also the true compute power in the new Keplers is also much inferior to the older cards.  Its all creative advertiseing today more akin to creative accounting / smoke and mirrors. What im trying to explain is when people read the charts that show the cuda core count and say the higest is best is completely not true. It may have the most "cores" but it will not render correctly, double percision is missing, colors may pop, anti aliasing is inferior and inconsistant,  interaction ( most important) and shaders will be buggy or missing. There are very good reasons people spend money on highend Quadro cards but the charts and reviews generically speaking never understand or can even test for this stuff.
    -Even given the above scenarios your Z820 should be killing your competition. Using a decked out Z820 is way overkill for anything CC. ( Kinda like driving an F1 to get groceries.)  get your HP rep to come over and replace / test your rig. Its free and covered in your coverage.
    I am CLEARLY not a tech guy as my talent in is creation and design but I overhear the tech guys talking.

  • Slow renders and exports.

    Jello,
    I have a standard config, 2x2.8 Ghz Quad-Core Intel Xeon.
    It has only 2 GB of RAM.
    I am editing HDV 1080p footage for output of the same encoding.
    It recently dawned on me that my render and export processes might be significantly expedited by an increase in my RAM.
    Yes, no? Why, why not?
    Glad to answer any questions, just want to make sure I make the right move.
    RAM cheap, but it ain't that cheap.
    Out,
    -the apple video dude

    I have the same Mac Pro with 10GB RAM but I'm also disappointed. I'm rendering VOB files (ie only the audio needs fixing) and it's taking looong. The activity monitor says the processor is only using 9%.
    However, when I use MPEG Streamclip for conversions I see that the activity monitor shows how it is using real raw power, unlike FCP.

  • Website having Intermittent Connectivity Issues and Sluggish Performance

    The Epilogue.  My request for help is at the break.
    Hello.  Since yesterday, I've been trying to buy a single-incident support contract from Adobe.  However, I've been unsuccessful.  Unless I'm not seeing something correctly on the website, it seem you can't buy CF support online.
    First, I called yesterday.  I waited for an extremely long period of time only to be told I'm in the wrong department.  Then I was transferred to sales, who then told me I need to speak with Enterprise support.  I called Enterprise support and was told I needed a support contract.  Fine.  I asked if I could get it, they then transferred me back to the general support line.  Dead end.
    Then I call again today.  The wait wasn't as long.  Again, I was bounced around from department to department.  Apparently saying "I need to purchase a support contract for Cold Fusion" means that somehow I want to be transferred to sales to buy CF.  I was then sent back to Enterprise support to be told that the guy was going to send an email to the "Enterprise Support" who will give me a call back in four hours. Huh?  Do I really want these people working on my server?
    Hello.  I'm the Network Administrator at my place of work.  I'm not the CF guy.  The CF administrator is a contractual/ third party person.  He also built/ designed our website.  I may not be able to answer questions with great detail, but I'll certainly try.  Our web server was put into production on 4/2011.  I did the initial setup and installation of Windows, IIS, and Endpoint.  The server is Windows 2008 R2, an AMD 2.4GHz Quad proccessor, 4GB of RAM.  It's running CF9 and IIS7.  Aside from Symantec Endpoint, CF is the only other installed program.
    The site ran fine for a while.  At the end of May, we started experiencing performance issues.  The CPU utilization would become maxed out.  The website would load slowly.  We do mail sends with our server.  The server was sending out emails at a snails pace.  Now, our website will occasionally become unresponsive or just unavailable.  There's not anything that proceeds this when it happens.  Sometimes it'll happen at 1AM in the morning, when obviously no one would be using our site.  On Monday, I brought this up to our CF administrator who suggested contacting Adobe.  He stated that he has other clients that run similar setups without issues.
    Could someone assist me?  Are there any logs anyone would like to see?

    Check your CF administration settings Server Settings, Client Variables
    If they are set to use the Registry (this was the default on our CF servers) you will need to set them to use a database somewhere.
    see:
    http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec0c35c -7fd5.html
    The symptoms you describe sound just like ours about a year ago. It was the Client Variable issue with our servers and we did not even have them enabled.

  • 7.4.1.2 is SLOW, LAGGY and SLUGGISH

    What the ****? I click to see if a song has been transferred to my iPod, click back onto my music libray and it takes 10 seconds to show the library. This has never happened before. What's the deal?
    Clicking anywhere, even menu items, the program will lag - what did you do Apple? You messed up this release somehow.
    Message was edited by: peledog

    None

  • Slow typing and sluggish

    In the last few days my imac has started to act funny. When I type fast it takes a while for the type to catch up to me. Very frustrating. Does anyone know what is going on? Thank you.
    PS I put this question in the wrong thread first.

    It would also pay to use Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
    After that Repair Permissions.
    No need to report Permissions errors....we all get them.
      DALE

  • Motion in FCPX - click lag, hanging, tortuously slow rendering

    Hello Colleagues,
    I have 2 iMacs of different generations, both up-to-spec and up-to-date on OS, FCP, and Motion.
    I am experiencing very poor performance when using Motion "generator" graphics: lag, hanging, slow renders, and sometimes even crashing.
    I have verified folder permissions, verified fonts, eliminated all converted events/libraries from pre-10.1 - pretty much everything except uninstalling, trashing prefs, and reinstalling fresh.
    Still, FCP seems to be FIGHTING ITSELF, with iStat showing that more than half of CPU effort is being used by "system" instead of "user" at any given moment (when Motion assets are present and enabled).
    The performance is far poorer than it ever was on FCP7 with Motion 4, and it is far worse than FCP10.0.x with Motion 5 (one of my machines was previously used with FCP7, however, the newer one has been FCPX since its unboxing day in early 2013).
    Does anyone have any suggestions for the next step in troubleshooting this problem?
    Thanks,
    Eric - CoralVision

    Yay it's Luis and Russ! Hello colleagues!
    Luis: I tink I posted a link to one of the troublesome assets for you, but I limped through the completion of that project by keeping the inspector closed. I still suffered lots o click-lag, spinny balls, and, at the end, an overnight render, but I got through. This was on a 90minute show choir concert that had about 12x 8 second lower 3rds, and about 3 minutes of full screen titles, rolls, and credits. All of the FCP generator assets were made by me from scratch in Motion5. The current post relates to a similar problem, but on a different machine with different assets. The current complaint is from my slightly older iMac (lower power than the new one but still quite capable when using the former versions of this software), and the generators came from Motion projects which were originally created in Motion4. So unless there is something wrong with my practice in using FCPX generators, something in common across the 4 or 5 projects where I have experienced similar problems, I think that a corrupt template is an unlikely explanation.
    Russ: I run my systems stock - that is to say that the only 3rd party plugins I have installed are the Canon EOS and XF plugins I use for ingesting media. I don't have any plugins related to MoGraph, editing, rendering, or memory management. These are custom generators that I am creating, chasing the "template" functionality I used to enjoy between Motion and FCP7. So yes, user generated custom generators - and I have had similar problems with several batches of varying complexity and varying origin.
    For now I will just have to adapt, observe, and troubleshoot. I have a sneaky feeling that I am doing something wrong in the way I am setting up the motion projects for publication, but I will surely announce it loudly if I learn anything new.
    Thanks for checking in, fellows!
    Eric D - CoralVision

  • Sluggish performance - Mac Mini and MBP?

    I'm experiencing sluggish performance on my Mac Mini with Leopard (upgrade installation) when using the genie effect, expose, spaces, gadgets, 3d dock, etc. It's jerky, as if the animation is missing frames. Is it related to the graphics card? I also find my finder painfully slow opening folders.... Any other people experiencing this? Are there any solutions available?

    Exactely the same here. I had to disable the 3D dock alltogether, admittedly not a big loss. Sluggishness seems to worsen with a 'complex' desktop picture (graphics card - texture issue?). Also, and most annoyingly, I find that text rendering seems to be much worse, e.g. look at the system menu with an all black or white desktop background. Or a SoulseeX window on top of some other (Carbon app with opacity set to 90% per default). This is a litte better if I set the display to a '2.2 Television gamma' (I have a 23" Cinema display). One thing that i will try is to boot back into 10.4 and see if it's just my imagination but I am pretty sure it's not.

  • Mac Pro 8-Core 2.8 Very Slow and sluggish

    Maybe someone here can point me in the right direction.
    My Mac Pro:
    2x 2.8GHz Quad Core Xeons
    2 GB of Ram (800 MHz DDR2 FB-DIMM)
    2 x 500 GB HD (Seagate)
    1 x 1TB Wester Digital Black
    512M NVidia GeForce 8800GT
    Has been running ridiculously slow. I have wiped the the main HD and re-installed everything from scratch, and it still has show no improvement. I work a lot with Photshop CS4 and Final Cut Studio 3, and the performance on my MacBook Pro 2.8 Unibody, is better than the Mac Pro.
    I've run all the utilities to verify the drives, and I've also run TechTool Pro and it passed all the tests.
    Does anyone have any suggestions?

    I have always said the RAM shipped with is only enough to boot, otherwise, consider that an anemic diet. Also, 8 DIMMs is faster and has more bandwidth.
    But -- it should 'work.'
    Then again, I'd pull Seagate drives.
    I have posted a lot of tips and threads on how to optimize photoshop, and depending on file size etc you start with 6-8GB RAM, add a good fast(er) scratch volume.
    Migrated from another system? or did full clean install of all apps?
    That is another source of trouble.
    The outer 1/3 of your 1TB Black is your best performance storage.
    Ideal:
    8GB or more
    SSD for boot drive, another for scratch, or use 10K drives, least but still better are 640GB or 1TB WD Blacks - four of 'em maybe stripe the whole setup.
    Boot drive: generally keep everything off it, no data or media, spotlight is off, primary scratch is pointed elsewhere, and that would be stripe array.
    Seagate: do some benchmark tests maybe if you need to verify if they are sluggish. Or just use them for emergency system backups.
    http://www.barefeats.com/harper3.html memory bandwidth
    http://kb2.adobe.com/cps/404/kb404440.html cs4 strategies
    http://www.adobe.com/go/kb401089 cs3 optimize performance
    http://homepage.mac.com/boots911/.Public/PhotoshopAccelerationBasics2.4W.pdf
    http://www.macgurus.com/guides/photoshopguide.php

  • IMac is very slow and sluggish, keeps churning when editing files or on internet

    My iMac is running slow and sluggish, it takes several minutes to edit a word document or search the internet ... intermittently it runs great but productivity is near zero when to edit a sentence in a Word document takes several minutes.  When typing an email the cursor stops and if you keep typing it eventually fills in what was typed even though you can't see it when typing. Ran Etrecheck ... report is attached.
    Problem description:
    iMac mid 2010 is running very slow … takes too long to edit documents and open internet sites … increased RAM a month ago from 4 to 12 GB
    EtreCheck version: 2.1.8 (121)
    Report generated March 6, 2015 at 8:25:35 AM CST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,3
        1 3.2 GHz Intel Core i3 CPU: 2-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 5670 - VRAM: 512 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 3 days 23:34:34
    Disk Information: ℹ️
        ST31000528AS disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (636.35 GB free) - 523 errors
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
        HP Officejet Pro 8500 A910
        Apple, Inc. Keyboard Hub
            Apple, Inc Apple Keyboard
        Apple Computer, Inc. IR Receiver
        Apple Inc. Built-in iSight
        Hewlett-Packard HP LaserJet Professional P1606dn
        Neat NeatConnect Scanner
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.marvell.kext.USBGenericPrinterClass (1.0.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.carbonite.launchd.carbonitealerts.plist [Click for support]
        [running]    com.carbonite.launchd.carbonitestatus.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.LaunchAgent.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.carbonite.launchd.carbonitedaemon.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.CommAgent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [loaded]    com.roamingclient.cell.mac.tm.roamingclient.plist [Click for support]
        [running]    com.tmobile-rocket20.zerocd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support] [Click for details]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.hp.printerAgent.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 51 Check version
        FlashPlayerDebugger-10.6: Version: 11.2.202.235 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 11.2.202.235 Outdated! Update
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
        DirectorShockwave: Version: 11.5.9r620 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    3rd Party Preference Panes: ℹ️
        Carbonite  [Click for support]
        Flash Player  [Click for support]
        GoToMyPC Preferences  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 363.00 GB
        Destinations:
            Taylor Technology Time Caps [Network]
            Total size: 2.00 TB
            Total number of backups: 91
            Oldest backup: 2014-01-13 06:38:23 +0000
            Last backup: 2015-03-06 14:07:22 +0000
            Size of backup disk: Adequate
                Backup size 2.00 TB > (Disk used 363.00 GB X 3)
    Top Processes by CPU: ℹ️
            81%    CarboniteDaemon
             4%    WindowServer
             3%    Neat
             1%    HP Scanner 3
             0%    Microsoft Word
    Top Processes by Memory: ℹ️
        3.05 GB    Neat
        1.46 GB    CarboniteDaemon
        232 MB    Microsoft Word
        232 MB    Finder
        219 MB    WindowServer
    Virtual Memory Information: ℹ️
        327 MB    Free RAM
        4.78 GB    Active RAM
        4.18 GB    Inactive RAM
        1.15 GB    Wired RAM
        125.62 GB    Page-ins
        298 MB    Page-outs
    Diagnostics Information: ℹ️
        Feb 12, 2015, 10:18:58 AM    /Library/Logs/DiagnosticReports/Kernel_2015-02-12-101858_[redacted].panic [Click for details]

    Matt ... got it done, recovery repair said Hard Drive OK.  Re-ran EtreCheck report attached ... still having the same issues.  Everything is fully backed up to Carbonite and Time Machine ... let me know if you see other conflicts or if it is the hard drive I will work to get it repaired.
    Thanks.
    EtreCheck version: 2.1.8 (121)
    Report generated March 6, 2015 at 9:28:28 AM CST
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,3
        1 3.2 GHz Intel Core i3 CPU: 2-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                4 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 5670 - VRAM: 512 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:2:41
    Disk Information: ℹ️
        ST31000528AS disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (643.46 GB free) - 21 errors
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5680H 
    USB Information: ℹ️
        HP Officejet Pro 8500 A910
        Apple, Inc. Keyboard Hub
            Apple Inc. iPhone
            Apple, Inc Apple Keyboard
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
        Hewlett-Packard HP LaserJet Professional P1606dn
        Neat NeatConnect Scanner
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.marvell.kext.USBGenericPrinterClass (1.0.0) [Click for support]
    Launch Agents: ℹ️
        [loaded]    com.carbonite.launchd.carbonitealerts.plist [Click for support]
        [running]    com.carbonite.launchd.carbonitestatus.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.LaunchAgent.plist [Click for support]
    Launch Daemons: ℹ️
        [running]    com.carbonite.launchd.carbonitedaemon.plist [Click for support]
        [running]    com.citrixonline.GoToMyPC.CommAgent.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
        [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
        [loaded]    com.roamingclient.cell.mac.tm.roamingclient.plist [Click for support]
        [running]    com.tmobile-rocket20.zerocd.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
        [loaded]    com.google.keystone.agent.plist [Click for support]
        [running]    com.hp.printerAgent.plist [Click for support]
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: Java 7 Update 51 Check version
        FlashPlayerDebugger-10.6: Version: 11.2.202.235 [Click for support]
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 11.2.202.235 Outdated! Update
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
        DirectorShockwave: Version: 11.5.9r620 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User internet Plug-ins: ℹ️
        CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    3rd Party Preference Panes: ℹ️
        Carbonite  [Click for support]
        Flash Player  [Click for support]
        GoToMyPC Preferences  [Click for support]
        Growl  [Click for support]
    Time Machine: ℹ️
        Auto backup: YES
        Volumes being backed up:
            Macintosh HD: Disk size: 999.35 GB Disk used: 355.88 GB
        Destinations:
            Taylor Technology Time Caps [Network]
            Total size: 2.00 TB
            Total number of backups: 91
            Oldest backup: 2014-01-13 06:38:23 +0000
            Last backup: 2015-03-06 14:07:22 +0000
            Size of backup disk: Adequate
                Backup size 2.00 TB > (Disk used 355.88 GB X 3)
    Top Processes by CPU: ℹ️
            25%    CarboniteDaemon
             3%    WindowServer
             2%    systemstatsd
             1%    launchd
             0%    HP Scanner 3
    Top Processes by Memory: ℹ️
        129 MB    CarboniteDaemon
        103 MB    ocspd
        77 MB    Safari
        52 MB    Dock
        39 MB    mds_stores
    Virtual Memory Information: ℹ️
        9.94 GB    Free RAM
        1.48 GB    Active RAM
        539 MB    Inactive RAM
        922 MB    Wired RAM
        1.01 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 6, 2015, 09:24:22 AM    Self test - passed
        Feb 12, 2015, 10:18:58 AM    /Library/Logs/DiagnosticReports/Kernel_2015-02-12-101858_[redacted].panic [Click for details]

Maybe you are looking for

  • Reader X: Can't disable Open in Browser with Firefox.

    This works fine in IE, but with Firefox 3.6.18 on XP-32 bit, the option: Edit - Prefrences - Internet - "Display PDF in Browser" still opens PDF's in the browser even if this box is unchecked. I need the vertical screen real-estate badly, and just ca

  • Unified Job Monitoring -Share your experiences with SAP Solution Manager 7.1

    Dear Forum members, I woudl like to introduce myself as Raghav, S. I am in the development team responsible for building the unified job monitoring workcenter starting 7.1 SP10 (onwards). Please post your feedback, current status wrt to setup, commmo

  • What's the benefit of Macbook??

    I live in Laos , I use Macbook 2.0 Intel core 2 Duo I can't use iTunes store ..... i don't know what can't i do more???? What i can do with the Macbook????? please tell me should i change the laptop? Please explain how should i do to use Macbook for

  • Is there any documentation for WebLogic domains?

    I've been sucessful in the past in setting up a custom WebLogic 8 domain for OraBPEL 2.*. However, it appears that there has been considerable changes in the way the domain must be setup for OraBPEL 10. In fact it seems that not only do you have to l

  • Unable to compare PDFs docs that have had security

    Unable to compare PDFs docs that have had security. Even when I own the documents and remove the security manually - this is a serious bug for CS5 - has anyone found a way around this?