Slow response nokia 3806

I've just bought Nokia 3806 CDMA because I like the design and features,but unfortunately I just found out that there's a lag between pressing the phone button and what appears on the screen.
In other words,I think the phone's response is slow.
Is there anything I can do to solve this problem or Nokia has already had the solution for this problem?
Is there any software updates for the phone?
My 3806 phone information :
Software version : BJ_3830B03_IDG_0200_R_R800
Hardware version : 4000
Thanks

Mostly its due to Apps running in background, like sms fwd, keylock, call blocker etc etc.
There are some apps which need to be daemonize and badly designed which cause slowness in response.
I would suggest to uninstall those which you don't need really. Or get use to slowness
Incase you see Apps folder opening slow, then try defrag on mem-card through PC

Similar Messages

  • Nokia N70 getting slower response

    I have trouble with my nokia n70 music edition. After loading songs into my phone, it started to have slower response especially when I'm opening the Gallery. It took about 16 seconds before I opened my Gallery. My songs are on my memory card and if I remove it, it only takes about 10 seconds before I opened the Gallery. How can I get faster response on my phone when opening programs like the gallery? Please I need help

    Where do you really store your music. I mean which folder on the memory card. Do you just copy your music files to the folder of your choice or you use the default My Music folder. I suggest you to transfer all your music files through the Nokia PC Suite's Transfer music option. This way you won't slow down your Gallery. Try this and give your feedback.
    Rohinton Contractor

  • A Typical Nseries Slow Response Issue (Esp. To Nok...

    I had this both on N73 & N93. I did not have this issue on my N95 yet, but I recently updated firmware to V30. May be the firmware installation is relatively new, the same issue has not happened yet on N95.
    When you first start using the Nseries phone, it works relatively fast. Menus are fine. It is not that fast, I know, but it is fine.
    But after couple months of normal using, I am not talking about installing so many applications, or having the memory card filled up full, just a normal use, the phone's operating system starts to slow down. This has always been an issue with Nseries.
    What happens is that, in time, there is a slow menu response, menu lag, and esp. the phone lags when it is waking up from standby screen (screen saver).
    This is also really weird: The phone goes in to the standby mode, the display is turned off, the bar showing the date and time appears, and the phone goes to sleep. (You can choose the time from setting menu). Now press a button to do something let's say, enter in to contacts, the phone phone can't wake up fast. It lags several seconds before it enters to, let's say, "Contacts."
    Once you start using the phone, it is fast again, but it is that very moment, when it is first waking up from standby, turning on screen and all, adjusting the brightness, when you try to do someting at that very moment, it acts slower, kind of, well, it hangs... It does not do this when the phone's OS is fresh, it starts to do this in time.
    Anyone had an idea why this may be happening? There must be a reason for this.
    The easiest solution for this is to "Reset" the phone. And your phone goes back to it's brand new stage and yes, the phone works fine for a couple of weeks or months but then, same thing happenes again. And it is really pain it the ***** to reset the phone, re-install everything. It is really time consuming.
    I guess we will have to live with that. I have never found a solid answer or a solution to this other than "resetting" or "updating" the phone's firmware. But may be I was thinking, may be someone knows what to do to trick the phone and avoid this really annoying "slow responses", "lags", or "temporary hangs".
    Thanks In Advance.

    This is what I do:
    1) When I get a new phone I boot it up. Let it finish the initial boot. Then Open Music Player, Video player, Photos, Video Center, Gallery, Camera,e tc. and check that everything seems fine.
    2) I make a Back-up using content copier or now OVI.
    3) I install only applications that I've tested and research that are not causing problems to the phone. If I'm trying some "unknown" application I'm always careful to make a recovery backup before I install so I can return.
    4) Back up frequently Contacts, Pictures, Videos and other important stuff.
    5) If the phone becomes unstable, memory fills up or something weird, then I reset and restore either the last known good backup point or the intial "new" backup I did in point 2)
    In my experience the best way to keep the phone working properly is NOT to load a bunch of applications of unknown quality or origin. SPECIALLY keep away from unsigned applications. The fact that they're unsigned means that there have been NO testing done by any official source and there are NO guarantees that this will not break or damage your phone!.
    640K Should be enough for everybody
    El_Loco Nokia Video Blog

  • Parameter based on decode/function field - slow response

    Hi,
    When one of the parameters of a report is used, the report takes a very long time to run. The parameter has a LOV of statuses in Hebrew.
    The folder is a custom folder and the status in Hebrew is a decode field using a function. In other words, it first goes to a function to get the status, and then translates each status (I guess that the Hebrew will be strange but I hope that the general form of the decode is clear):
    DECODE( APPS.JAFI_DISCO_UTILS_PKG.JAFI_GET_INVOICE_STATUS(
    AI.INVOICE_ID,
    AI.INVOICE_AMOUNT,
    AI.PAYMENT_STATUS_FLAG,
    AI.INVOICE_TYPE_LOOKUP_CODE),
    'APPROVED','מאומת',
    'NEVER APPROVED','מעולם לא עבר אימות',
    'NEEDS REAPPROVAL','דורש אימות מחדש',
    'CANCELLED','מבוטל',
    'AVAILABLE','זמין',
    'UNAPPROVED','לא מאומת',
    'SELECTED FOR PAYMENT','נבחר לתשלום',
    'FULL','מיוחס במלואו',
    'UNPAID','לא שולם',' ')
    I am assuming that the reason for the slow response is the constant run of the function in addition to the decode (which I was once told also slows the response a bit).
    Is there anyway to change the sql somewhat? Without using the parameter the report takes about 2 1/2 minutes to run. Using the parameter it takes around 25 minutes to run.
    Thank you.
    Leah
    Edited by: user476771 on May 10, 2010 2:09 AM

    Hi Michael,
    I think your suggestion #3, checking the indexes, is an excellent start.
    As to the other suggestions, I believe that everything passed to the function is needed to find the status.
    We seem to have serious problems running materialized views. Our dba is actually checking it out now. One group of mv were changed a few months ago so that they are no longer needed (someone worked around it using other tables for the data). Another mv is problematic even though it takes 14 minutes to create in a tst environment (which I happen to do yesterday) and causes no problems afterwards, it is a problem when run in prod as part of a job. As I mentioned, our dba is checking it out.
    I hesitate to create a new table that is updated every night with the status of each invoice. It won't be up-to-date during the day, and it means changing the report that has otherwise run smoothly until now. The user avoids using the one parameter as much as possible so it's not THAT bad...
    I really appreciate your giving the four suggestions.
    Thank you so much.
    Leah

  • Slow Response Sun ONE 6.1 SP3 Win 2003

    My Sun ONE web server is processing my JSP pages very quickly when serving one session at a time. However when there are 4 or more active sessions, it slows right down. Response time goes from 2 seconds (1 active session) to 60 seconds (multiple active sessions) for a single JSP page. I've been running the performance monitor to see if I can notice anything, but nothing seems to stand out. I have tried manipulating the Keep Alive settings and the Performance settings within the Magnus Editor but there hasn't been a noticable improvement.
    I've recently upgraded to SP4 to see if this solved my problem, but there was no imporvement.
    This server is an HP DL380 with dual 2.8GHz Xeon processors & 2 Gigs of RAM. There is a lot of available disk space. I'm running Windows 2003 and it's up to date with all the latest patches.
    Anyone have any ideas or experienced this before?
    I've attached the output from my performance monitor:
    webservd pid: 4280
    Sun ONE Web Server 6.1SP4 B01/20/2005 21:34 (WINNT DOMESTIC)
    Server started Thu Mar 03 09:41:06 2005
    Process 4280 started Thu Mar 03 09:41:06 2005
    ConnectionQueue:
    Current/Peak/Limit Queue Length 0/1/4096
    Total Connections Queued 126
    Average Queue Length (1, 5, 15 minutes) 0.00, 0.00, 0.00
    Average Queueing Delay 0.02 milliseconds
    ListenSocket ls1:
    Address http://10.178.132.7:8080
    Acceptor Threads 8
    Default Virtual Server https-guruweb01
    KeepAliveInfo:
    KeepAliveCount 2/64
    KeepAliveHits 1083
    KeepAliveFlushes 0
    KeepAliveRefusals 0
    KeepAliveTimeouts 11
    KeepAliveTimeout 360 seconds
    SessionCreationInfo:
    Active Sessions 2
    Keep-Alive Sessions 1
    Total Sessions Created 48/256
    CacheInfo:
    enabled yes
    CacheEntries 110/1024
    Hit Ratio 1912/2164 ( 88.35%)
    Maximum Age 30
    Native pools:
    NativePool:
    Idle/Peak/Limit 5/6/128
    Work Queue Length/Peak/Limit 0/1/0
    Server DNS cache disabled
    Async DNS disabled
    Performance Counters:
    Average Total Percent
    Total number of requests: 1213
    Request processing time: 1.5520 1882.5520
    default-bucket (Default bucket)
    Number of Requests: 1213 (100.00%)
    Number of Invocations: 15085 (100.00%)
    Latency: 0.0002 0.2013 ( 0.01%)
    Function Processing Time: 1.5518 1882.3507 ( 99.99%)
    Total Response Time: 1.5520 1882.5520 (100.00%)
    Sessions:
    Process Status Function
    4280 keep-alive
    response service-dump
    response service-j2ee
    Thanks...

    The JSP's are simply Hello World JSP's (however I created these type of JSP's for testing and they do respond slowly as well when these are multiple sessions).
    These JSP functioned fine on iPlanet 6.0 SP1 (JDK 1.2.2) without any slow response on Win2K and inferior hardware.

  • Slow response using internet, just hangs

    Not the best at IT and just clicked update when it came up as available without realising what I was doing!  Turns out it was an upgrade to os x 10.9.4.  Since then the laptop has been practically unusable particularily when it comes to safari, it is either really slow getting to a particular page or just doesnt do anything, no matter how long you wait.  Restarting doesnt seem to help, reload view fails as well.  Its strange as sometimes its ok for 10 minutes then starts doing this.  I know this is bad but I have never backed the laptop up so cant restore to previous version.  I am currently looking into which external hard drive to buy so I can start doing regular back ups.  I have run EtreCheck in the hope somebody can help!!  Results below
    Problem description:
    Very slow responses on internet, just hangs for ages
    EtreCheck version: 2.0.6 (91)
    Report generated 25 October 2014 13:18:22 BST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.9.4 (13E28) - Uptime: 0:42:39
    Disk Information: ℹ️
      ST9500325ASG disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (392.13 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) Support
      /Users/[redacted]/Downloads/PeerGuardian.app
      [not loaded] xxx.qnation.PeerGuardian (1.1.11 - SDK 10.2) Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] xxx.qnation.PeerGuardian.locum.plist Support
    User Launch Agents: ℹ️
      [running] com.amazon.cloud-player.plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
      pploader Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pploa der.app)
      pplogger Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pplog ger.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Cannot contact Adobe
      LogMeIn: Version: 1.0.730 Support
      QuickTime Plugin: Version: 7.7.3
      LogMeInSafari32: Version: 1.0.730 Support
      LogMeInSafari64: Version: 1.0.730 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Safari Extensions: ℹ️
      AdBlock
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          6% WindowServer
          1% fontd
          0% AppleSpell
          0% Safari
          0% imagent
    Top Processes by Memory: ℹ️
      159 MB Safari
      103 MB pploader
      73 MB com.apple.WebKit.WebContent
      47 MB WindowServer
      34 MB mds_stores
    Virtual Memory Information: ℹ️
      1.53 GB Free RAM
      1.14 GB Active RAM
      655 MB Inactive RAM
      971 MB Wired RAM
      624 MB Page-ins
      0 B Page-outs

    Not the best at IT and just clicked update when it came up as available without realising what I was doing!  Turns out it was an upgrade to os x 10.9.4.  Since then the laptop has been practically unusable particularily when it comes to safari, it is either really slow getting to a particular page or just doesnt do anything, no matter how long you wait.  Restarting doesnt seem to help, reload view fails as well.  Its strange as sometimes its ok for 10 minutes then starts doing this.  I know this is bad but I have never backed the laptop up so cant restore to previous version.  I am currently looking into which external hard drive to buy so I can start doing regular back ups.  I have run EtreCheck in the hope somebody can help!!  Results below
    Problem description:
    Very slow responses on internet, just hangs for ages
    EtreCheck version: 2.0.6 (91)
    Report generated 25 October 2014 13:18:22 BST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Late 2011) (Verified)
      MacBook Pro - model: MacBookPro8,1
      1 2.4 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.9.4 (13E28) - Uptime: 0:42:39
    Disk Information: ℹ️
      ST9500325ASG disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Macintosh HD (disk0s2) /  [Startup]: 499.25 GB (392.13 GB free)
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      MATSHITADVD-R   UJ-8A8
    USB Information: ℹ️
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.97) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.97) Support
      /Users/[redacted]/Downloads/PeerGuardian.app
      [not loaded] xxx.qnation.PeerGuardian (1.1.11 - SDK 10.2) Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] xxx.qnation.PeerGuardian.locum.plist Support
    User Launch Agents: ℹ️
      [running] com.amazon.cloud-player.plist Support
      [loaded] com.google.keystone.agent.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Android File Transfer Agent Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
      pploader Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pploa der.app)
      pplogger Application (/Users/[redacted]/Downloads/PeerGuardian.app/Contents/Library/LoginItems/pplog ger.app)
    Internet Plug-ins: ℹ️
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 537 - SDK 10.9
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Cannot contact Adobe
      LogMeIn: Version: 1.0.730 Support
      QuickTime Plugin: Version: 7.7.3
      LogMeInSafari32: Version: 1.0.730 Support
      LogMeInSafari64: Version: 1.0.730 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Safari Extensions: ℹ️
      AdBlock
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          6% WindowServer
          1% fontd
          0% AppleSpell
          0% Safari
          0% imagent
    Top Processes by Memory: ℹ️
      159 MB Safari
      103 MB pploader
      73 MB com.apple.WebKit.WebContent
      47 MB WindowServer
      34 MB mds_stores
    Virtual Memory Information: ℹ️
      1.53 GB Free RAM
      1.14 GB Active RAM
      655 MB Inactive RAM
      971 MB Wired RAM
      624 MB Page-ins
      0 B Page-outs

  • Extremely Slow Response when attempting to display files on Windows Server

    I have set up File Sharing on my MacBook Pro using SMB and defined the folders that are available to be shared. When I look at the Network Neighbourhood in Windows Explorer the Macbook appears listed with all the other PCs on the network. When I try to open the Macbook in Explorer it takes a very long time to open (about 2 minutes or so) and shows me the list of folders. When I try to open a folder the exact same thing happens - it opens after a couple of minutes, this continues for every folder that I try to open. I thought it might be that Explorer needed to "catalog" the files in the folders but the same thing happens each time - if I close the connection and try again it takes the same amount of time. What is very strange is that if I connect to the Windows Server from the Mac opening and looking at shared folders/files is instantaneous so clearly this is not a network problem. If I use the Win2K3 server to look at other computers/files the result is the same - instantaneous access, so it has nothing to do with the Win2K3 server - clearly the problem is with the MacBook serving up the file information to the Win2K3 server. I have tried with AFP on and off and the result is the same. The user name/pwd is the same on both the Win2K3 and the Macbook - and I have tried with a different username on the Win2K3 - no difference. Anyone have any ideas as to why this is happening?

    Yes they are on the same workgroup, on ethernet, plugged into the same switch. The Mac can read and copy files of the Win2K3 server with no problem. The problem is clearly at the Mac end as the Win2K3 server can view files on any machine on the network without the slow response, the Mac can view files on the Win2K3 server without the slow response, it is only when the Win2K3 server tries to view files on the Mac.

  • Random users getting very slow response when opening messages/attachments or sending email

    I have a small number of users, mostly very senior management of course, who are experiencing slow response when trying to open email messages and attachments or send messages.
    They see the spinning wheel and sit there until it decides to open or send. If the message is opened  and closed again you would expect it to be quick reopening the same message, no, it does the same thing again.
    These users are all using Outlook 2010 and their mail accounts are on Exchange 2013. It does not seem to make a difference if they use a physical machine or log into a VDI.
    I do not have the same issue generally, though I have experienced this when using VDI and this has been seen using a number of different machine pools so it is not a specific pool.
    This is not specifically a VDI issue, as the 3rd paragraph says, the issues are seen on both physical and virtual machines.
    none of the mailboxes are particularly large, most are at around 60% of quota limit, and the same limit applies to almost all mailboxes across the organization. They also do not appear to have a huge number of messages stored, other users without issues
    have larger mailboxes and higher item counts. Any ideas what I need to look at to address this?

    Hi,
    How about OWA?
    If OWA works well, it seems an issue on the Outlook client side.
    Please try to run Outlook under safe mode and re-create profile for testing.
    Any related error/warning/information message left in App Log?
    Also consider the network Bandwidth.
    Thanks
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Mavis Huang
    TechNet Community Support

  • Very slow response when I click on a link, but almost instant response if I go back and click a second time.

    I often get very slow response when I click on a link, any link. But if I go back and click on the link again, then the page will open almost immediately. I discovered this by accident and noticed that this happens every time. It would be nice if I got fast response on the first click without having to do this silly procedure and it seems to me that there's a simple fix. I would appreciate it if you could help. I'm open to any and all ideas. Thanks again.
    Sincerely,
    Al
    Version 26.0 Firefox, Windows XP, sp/3

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • Slow response when using Xcelsius web service connection witn input values

    We've been very successful in using the Xcelsius Web Service Connection. We've recently moved forward toward using input values when calling a web service and having issues with response time. Without input values, it takes 3 - 6 seconds to retrieve and display the results in Xcelsius, but, when using the input values to the web service, it takes about 27 seconds for Xcelsius to retrieve and display the results.  Does anyone have experience with fixing slow response associated with using input values for a web service connection?

    Hi Sharone,
    What's the version of your Xcelsius and BOBJ server?
    I'm asking because using the last version of BOBJ server (BOXI 3.1 SP 3) you have new services on CMC just to help Xcelsius to work better with WebServices.
    Regards,
    Rodrigo.

  • Using collections and experiencing slow response

    I am experiencing slow response when using htmldb_collection. I was hoping someone might point me in another direction or point to where the delay may be occurring.
    First a synopsis of what I am using these collections for. The main collections are used in order to enable the users to work with multiple rows of data (each agreement may have multiple inbound and outbound tiered rates). These collections, OBTCOLLECTION and IBTCOLLECTION, seem to be fine. The problem arises from the next set of collections.
    OBTCOLLECTION and IBTCOLLECTION each contain a field for city, product, dial code group and period. Each of these fields contains a semi-colon delimited string. When the user chooses to view either the outbound tiers (OBTCOLLECTION) or the inbound tiers (IBTCOLLECTION), I generate four collections based on these four fields, parsing the delimited strings, for each tier (record in the OBT or IBT collection). Those collections are used as the bases for multiple select shuttles when the user edits an individual tier.
    Here is the collection code for what I am doing.
    When the user chooses an agreement to work with, by clicking on an edit link, they are sent to page 17 (as you see referenced in the code). That page has the on-demand process below triggered on load, after footer.
    -- This process Loads the collections used
    -- for the Inbound and Outbound tier details
         -- OBTCOLLECTION
         -- IBTCOLLECTION
    -- It is an on-demand process called on load (after footer) of page 17 --
    -- OUTBOUND TIER COLLECTION --
         if htmldb_collection.collection_exists( 'OBTCOLLECTION') = TRUE then
             htmldb_collection.delete_collection(p_collection_name => 'OBTCOLLECTION' );
         end if;
         htmldb_collection.create_collection_from_query(
             p_collection_name => 'OBTCOLLECTION',
             p_query           => 'select ID, AGREEMENT_ID, FIXED_MOBILE_ALL,
                              OF_TYPE,TIER, START_MIN, END_MIN,
                                             REVERT_TO, RATE,CURRENCY,
                                             PENALTY_RATE, PENALTY_CURR,
                       PRODUCT,CITY, DIAL_CODE_GROUP, PERIOD,
                        to_char(START_DATE,''MM/DD/YYYY''),
                                             to_char(END_DATE,''MM/DD/YYYY''),
                                             MONTHLY,EXCLUDED,
                       ''O'' original_flag
                          from outbound_tiers
                          where agreement_id = '''||:P17_ID ||'''
                          order by FIXED_MOBILE_ALL, ID',
             p_generate_md5    => 'YES');
    -- INBOUND TIER COLLECTION --
         if htmldb_collection.collection_exists( 'IBTCOLLECTION') = TRUE then
             htmldb_collection.delete_collection(p_collection_name => 'IBTCOLLECTION' );
         end if;
         htmldb_collection.create_collection_from_query(
             p_collection_name => 'IBTCOLLECTION',
             p_query           => 'select ID, AGREEMENT_ID, FIXED_MOBILE_ALL,
                              OF_TYPE,TIER, START_MIN, END_MIN,
                                             REVERT_TO, RATE,CURRENCY,
                                             PENALTY_RATE, PENALTY_CURR,
                              PRODUCT,CITY, DIAL_CODE_GROUP, PERIOD,
                              to_char(START_DATE,''MM/DD/YYYY''),
                                             to_char(END_DATE,''MM/DD/YYYY''),
                                             MONTHLY,EXCLUDED,
                              ''O'' original_flag
                          from inbound_tiers
                          where agreement_id = '''||:P17_ID ||'''
                          order by FIXED_MOBILE_ALL, ID',
             p_generate_md5    => 'YES');
         commit;The tables each of these collections is created from are each about 2000 rows.
    This part is working well enough.
    Next, when the user chooses to view the tier information (either inbound or Outbound) they navigate to either of two pages that have the on-demand process below triggered on load, after header.
    -- This process Loads all of the collections used
    --  for the multiple select shuttles --
         -- DCGCOLLECTION
         -- CITYCOLLECTION
         -- PRODCOLLECTION
         -- PRDCOLLECTION
    -- It is  an on-demand process called on load (after footer)  --
    DECLARE
       dcg_string long;
       dcg varchar2(100);
       city_string long;
       the_city varchar2(100);
       prod_string long;
       prod varchar2(100);
       prd_string long;
       prd varchar2(100);
       end_char varchar2(1);
       n number;
       CURSOR shuttle_cur IS
          SELECT seq_id obt_seq_id,
                 c013 product,
                 c014 city,
                 c015 dial_code_group,
                 c016 period
          FROM htmldb_collections
          WHERE collection_name = 'OBTCOLLECTION';
       shuttle_rec shuttle_cur%ROWTYPE;
    BEGIN
    -- CREATE OR TRUNCATE DIAL CODE GROUP COLLECTION FOR MULTIPLE SELECT SHUTTLES --
         htmldb_collection.create_or_truncate_collection(
         p_collection_name => 'DCGCOLLECTION');
    -- CREATE OR TRUNCATE CITY COLLECTION FOR MULTIPLE SELECT SHUTTLES --
         htmldb_collection.create_or_truncate_collection(
         p_collection_name => 'CITYCOLLECTION');
    -- CREATE OR TRUNCATE PRODUCT COLLECTION FOR MULTIPLE SELECT SHUTTLES --
         htmldb_collection.create_or_truncate_collection(
         p_collection_name => 'PRODCOLLECTION');
    -- CREATE OR TRUNCATE PERIOD COLLECTION FOR MULTIPLE SELECT SHUTTLES --
         htmldb_collection.create_or_truncate_collection(
         p_collection_name => 'PRDCOLLECTION');
    -- LOAD COLLECTIONS BY LOOPING THROUGH CURSOR.
         OPEN shuttle_cur;
         LOOP
            FETCH shuttle_cur INTO shuttle_rec;
            EXIT WHEN shuttle_cur%NOTFOUND;
            -- DIAL CODE GROUP --
            dcg_string := shuttle_rec.dial_code_group ;
            end_char := substr(dcg_string,-1,1);
            if end_char != ';' then
               dcg_string := dcg_string || ';' ;
            end if;
            LOOP
               EXIT WHEN dcg_string is null;
               n := instr(dcg_string,';');
               dcg := ltrim( rtrim( substr( dcg_string, 1, n-1 ) ) );
               dcg_string := substr( dcg_string, n+1 );
               if length(dcg) > 1 then
                htmldb_collection.add_member(
                   p_collection_name => 'DCGCOLLECTION',
                   p_c001 => shuttle_rec.obt_seq_id,
                   p_c002 => dcg,
                   p_generate_md5 => 'NO');
               end if;
            END LOOP;
            -- CITY --
            city_string := shuttle_rec.city ;
            end_char := substr(city_string,-1,1);
            if end_char != ';' then
               city_string := city_string || ';' ;
            end if;
            LOOP
               EXIT WHEN city_string is null;
               n := instr(city_string,';');
               the_city := ltrim( rtrim( substr( city_string, 1, n-1 ) ) );
               city_string := substr( city_string, n+1 );
               if length(the_city) > 1 then
                htmldb_collection.add_member(
                   p_collection_name => 'CITYCOLLECTION',
                   p_c001 => shuttle_rec.obt_seq_id,
                   p_c002 => the_city,
                   p_generate_md5 => 'NO');
               end if;
            END LOOP;
            -- PRODUCT --
            prod_string := shuttle_rec.product ;
            end_char := substr(prod_string,-1,1);
            if end_char != ';' then
               prod_string := prod_string || ';' ;
            end if;
            LOOP
               EXIT WHEN prod_string is null;
               n := instr(prod_string,';');
               prod := ltrim( rtrim( substr( prod_string, 1, n-1 ) ) );
               prod_string := substr( prod_string, n+1 );
               if length(prod) > 1 then
                htmldb_collection.add_member(
                   p_collection_name => 'PRODCOLLECTION',
                   p_c001 => shuttle_rec.obt_seq_id,
                   p_c002 => prod,
                   p_generate_md5 => 'NO');
               end if;
            END LOOP;
            -- PERIOD --
            prd_string := shuttle_rec.period ;
            end_char := substr(prd_string,-1,1);
            if end_char != ';' then
               prd_string := prd_string || ';' ;
            end if;
            LOOP
               EXIT WHEN prd_string is null;
               n := instr(prd_string,';');
               prd := ltrim( rtrim( substr( prd_string, 1, n-1 ) ) );
               prd_string := substr( prd_string, n+1 );
               if length(prd) > 1 then
                htmldb_collection.add_member(
                   p_collection_name => 'PRDCOLLECTION',
                   p_c001 => shuttle_rec.obt_seq_id,
                   p_c002 => prd,
                   p_generate_md5 => 'NO');
               end if;
            END LOOP;
         END LOOP;
         CLOSE shuttle_cur;
        commit;
    END;Creating these collections from the initial collection is taking way too long. The page is rendered after about 22 seconds (when tier collection has 2 rows) and 10 minutes worst case (when the tier collection has 56 rows).
    Thank you in advance for any advice you may have.

    Try to instrument/profile your code by putting timing statements after each operation. This way you can tell which parts are taking the most time and address them.

  • Program Monitor - slow response

    In the effect controls I can scale, rotate etc  by entering values or pulling sliders.
    However I am suffering from a very slow response doing scaling, rotating and translating in the program monitor- while Motion has been highlighted in the effect controls.
    Also I have noticed there is a yellow box with handles in the program monitor. I remember it was white before.
    I like to scale in Program Monitor since it works more interactively.
    I cannot figure out what to change in my preferences.
    Best,
    Hans Wessels
    Premiere CC
    Mac Pro OSX 10.7.5
    16 GB 1066 MHz DD3
    2 X NVIDIA GeForce GT 120 512 MB

    Yes that is correct. The white bounding box is now yellow. I think is looks better.
    I see you have two graphic cards. Disable one of the.
    Might want to get a more powerfull one.

  • Slow response  on data dictionary queries with optimizer_mode=rule in  10g

    I have two dataabse: DB1 (9i) and DB2 (10g) on windows 2000
    They are two development databases with the same schemas and same tables. The application executes the same commands but with different results and execution plans.
    In DB2 the queries with the most slow response tima are the queries on the data dictionary (for example: all_synonyms).
    These query are very fast with the optimizer_mode=cost and very slow with the optimizer_mode=rule.
    And the the problem is this:
    in DB1 and DB2 the application executes after the connection this command:
    ALTER SESSION SET OPTIMIZER_MODE = 'RULE';
    These are the traces of the session in db1 and db2:
    The queries are created dynamically by the application.
    Is there a solution for this?
    thanks
    Message was edited by:
    user596611

    Here is a simple example of what can happen,
    @>alter session set optimizer_mode=all_rows;
    @>SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY());
    PLAN_TABLE_OUTPUT
    | Id  | Operation        | Name | Rows  | Cost (%CPU)|
    |   0 | SELECT STATEMENT |      |     1 |     2   (0)|
    |   1 |  FAST DUAL       |      |     1 |     2   (0)|
    @>alter session set optimizer_mode=rule;
    @>SELECT PLAN_TABLE_OUTPUT FROM TABLE(DBMS_XPLAN.DISPLAY());
    PLAN_TABLE_OUTPUT
    | Id  | Operation        | Name |
    |   0 | SELECT STATEMENT |      |
    |   1 |  FAST DUAL       |      |
    Note
          - rule based optimizer used (consider using cbo)As you can see incomplete explain plans. Therefore it is not advised.
    Adith

  • Oracle 8i giving slow response when running sql query

    hi ,
    i am using oracle 8i server ;
    and sql query giving slow response before some days;
    so which parameter need to increase
    DB_BLOCK_BFFERS OR SHARE_POOL_SIZE
    CURRENT SETING IS
    DB_BLOCK_BUFFER=256000;
    SHARE POOLSIZE=300M;
    pls advice to me
    thanks

    No parameters need to be increased. Tuning is not done but making arbitrary changes to values and hoping that good things will happen by accident.
    The thing you really should be worrying about is your antique database and likely its impact on your skill set unless you are one year away from retirement.
    Where's the actual version number?
    Where's the DDL?
    Where's the DML?
    Where's the Explain Plan?

  • EBS r12 (12.0.6) giving slow response to clients.

    Hi,
    Anyone can help me to findout the bottleneck of slow response of EBS r12.
    We r using oracle 10g (10.2.0.3) and r12 (12.0.6).
    its urgent...plz.
    thx.

    Hi;
    Similar topic discussed before,Please check:
    -business Performance issuse
    Re: E-business Performance issuse
    You can also check [this search|http://forums.oracle.com/forums/search.jspa?threadID=&q=performance&objID=c3&dateRange=all&userID=&numResults=15]
    Regard
    Helios

Maybe you are looking for