Slow response time for "Print Settings" dialog in CS6
steps performed to resolve - with no success:
disabled NET DRIVER HPZ12
updated CS6 with latest fixes
printer driver is up to date
usb driver up to date
swapped USB ports across three ports
ran font test with no errors
changed default Win 7 printer to Adobe PDF.
Windows 7 has latest fixes.
Configuration is:
Win 7 Home 64 bit
8 core AMD
16 GB memory
Photoshop CS6 64 bit
HP c410a printer - USB connected
32 bit Photoshop CS4 on the same platform does not have the response time issue.
From Adobe Support: 17 secs response time is a normal time interval for the "Print Settings" dialogue.
Similar Messages
-
Slow response time for HTTP requests
I have an 8310 Pearl. For the past week, I've noticed that the response time using the Internet browser was very slow. One work-around was to cancel the request and then submit it again. The second request returned the page MUCH faster.
I cleared my history, and this seemed to have helped. Has anyone else noticed this? ThanksWelcome to the forums
Try a Battery Pull:
1. Remove the battery while phone is turned on
2. Wait a few seconds before inserting it again
3. Allow the long boot up process to finish (takes a few minutes usually)
This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://software.crackberry.com/product.asp?id=27660
A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
Kijana
Please remember to:
1. Mark Accept as Solution on the appropriate post once your issue has been resolved
2. Give Kudos to helpful posts (click the star next to the post)
Thanks -
Slow response time for radio buttons on Internet Explorer 7
Hi,
We're using ADF 11.1.1.4 on weblogic 10.3.4 on a Solaris 10 (sparc) platform. The architecture also uses OHS and Webcache 11.1.1.4.
One of our applications has a webpage that is composed of several tabs, inside each tab we have some questions with radio buttons. When a client responds all questions on the first tab it moves to the second, where the application loads the necessary questions, based on the answers provided on the first tab. Once the client finishes answering this tab it moves to the third one and so on.
The problem appears once the tabs are loaded. Each time the client clicks one of the radio buttons, Internet Explorer takes between 3 to 5 seconds to return control, and considering that a client might need to click dozens of radio buttons to complete a process, it becomes a very exhausting task. It's worth noting that the session information is persisted for each radio button, when we move between tabs all answers are kept even if we didn't saved the progress.
On the other side, if we use Google Chrome 16, we find that the webpage returns control to the user almost inmediately, when clicking the radio buttons the response time is usually at 1 second or less.
We've checked that the app server is not stressed, heap memory is nowhere near the maximum assigned and the used processor % is very low, so it does not seems to be a resource problem.
Is there any known issue with ADF 11.1.1.4 and IE7/8 that affects the browser's response time? Are there any guidelines or recommendations regarding how to make the radio button component work properly? Has anybody noticed this behavior in adf?
Thanks.I think that the most accurate description of the problem is that the autosubmit action of the radio button takes considerably longer in IE7 than in Chrome.
-
Slow response time for JSP pages under iAS 6.0 SP4
Hi,
I got an application deployed on iplanet app server 6.0 SP4 on solaris
2.8. Using a single kjs engine and lite sessions. kjs memory size is
min 256 and max 256 megs. but verbose:gc shows memory is 98% free.
when i restart the app server, all JSP pages are really rendered fast.
After a while (1 or 2 days), the time to service the same request to
JSP pages is getting much longer (even with JSP pages having only
static content in them). CPU is idle ... It just takes time. KXS log
shows requet is taking like 2-4 seconds instead of about 150 milli
secs when the engine is just restarted.
Now if i call a servlet (which do not dispath to a JSP), the response
time is ok! Memory is ok. It looks like its related to JSP pages
only.
Anyone having an idea what the problem could be? One conig param is
the JSP page cache in iASAT. Default value is 10. What is a correct
setting for production? I have 4 different web app deployed in the
same server instance.
Tanks a lot for your input
Andre ParadisAndre,
I have found the answer to my problem and perhaps yours. It seems that I18N (internationalization) in SP4 may have a performance bug in it.
My soak tests show that with i18N checked in the iAS Admin Tool, testing the fortune cookie sample application with light load (1 request / sec) resulted in a kxs response time initially of 15ms, however this response time increased by roughly 1% per request (i.e after 100 requests the response time had more than doubled).
Switching I18N off yielded a steady 7ms kxs response time from the fortune cookie application.
I would add that I turned I18N on AFTER the installation procedure.
Is this a known issue in SP4? Is there a patch?
regards,
Owen -
Why does HP LoadRunner measure slow response time for SAP GUI selection steps?
We are running HP LoadRunner 11.52 scenarios out to multiple (up to 4) load generators. Load generators have 24 GB ram and 8 CPU's. We have run a maximum of 200 users and see a maximum usage of ~25% on CPU's. We were previously running SAP GUI 7.4 and downgraded to 7.3 when we came to understand 7.4 is not supported in PAM for LR 11.52. Regardless, our results have not changed. What we are trying to resolve is why the first two steps of opening the SAP GUI and entering system-related selection is taking so long to process? Additionally, we typically see that during the time escalation of those steps, that there is a period where the process seems to pause for a large time gap. The process below shows a snapshot while in progress. The SAP GUI steps are hitting severe peaks wthile all other steps during the process tend to track at a steady quick response time. Any degradation there looks to be tied to the long pauses.
Would anyone have knowledge or experience with this type of output and understand why it might be consistenty happening? Thanks.> Has anybody else been contacted by SAP regarding a "Very Important Notification about Security and Your SAP System"
A forum search on ' 1298160", one of the note numbers, reveals the answer to your question.
Please always use the search first. -
This last weekend, we migrated off of our old server 2003 cf7mx server, to a new Server 2008r2 x64 CF 9,0,1,274733 server. We are now experiencing slow response times for our server,according to the Windows Performance monitor our Avg Request times are way up. I have been going through some logs but nothing seems to leap out at me, but i am not the best CF admin. As i dont know what information would be usefull, i have tried to give all the info.
Here is our coldfusion-event log:
08/14 16:22:58 user JSPServlet: init
08/14 16:23:00 user ColdFusionStartUpServlet: init
08/14 16:23:00 user ColdFusionStartUpServlet: ColdFusion: Starting application services
08/14 16:23:00 user ColdFusionStartUpServlet: ColdFusion: VM version = 14.3-b01
08/14 16:23:08 user ColdFusionStartUpServlet: ColdFusion: application services are now available
08/14 16:23:08 user CFMxmlServlet: init
08/14 16:23:08 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
08/14 16:23:10 user CFSwfServlet: init
08/14 16:23:10 user CFCServlet: init
08/14 16:23:12 user FlashGateway: init
08/14 16:23:12 user MessageBrokerServlet: init
08/14 16:23:13 user CFFormGateway: init
08/14 16:23:13 user CFInternalServlet: init
08/14 16:23:13 user WSRPProducer: init
08/14 16:23:13 user ServerCFCServlet: init
08/15 08:13:09 user GraphServlet: init
08/15 10:25:45 user CFInternalServlet: destroy
08/15 10:25:50 user FlashGateway: destroy
08/15 10:25:50 user WSRPProducer: destroy
08/15 10:25:50 user CFCServlet: destroy
08/15 10:25:50 user GraphServlet: destroy
08/15 10:25:50 user CFMxmlServlet: destroy
08/15 10:25:50 user CFFormGateway: destroy
08/15 10:25:50 user CFSwfServlet: destroy
08/15 10:26:50 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
08/15 10:26:50 info JRun Proxy Server listening on *:51800
08/15 10:26:50 info Deploying enterprise application "Adobe_ColdFusion_9" from: file:/C:/ColdFusion9/
08/15 10:26:51 info Deploying web application "Adobe ColdFusion 9" from: file:/C:/ColdFusion9/
08/15 10:26:52 user JSPServlet: init
08/15 10:26:53 user ColdFusionStartUpServlet: init
08/15 10:26:53 user ColdFusionStartUpServlet: ColdFusion: Starting application services
08/15 10:26:53 user ColdFusionStartUpServlet: ColdFusion: VM version = 14.3-b01
08/15 10:26:58 user ColdFusionStartUpServlet: ColdFusion: application services are now available
08/15 10:26:58 user CFMxmlServlet: init
08/15 10:26:58 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
08/15 10:26:59 user CFSwfServlet: init
08/15 10:27:00 user CFCServlet: init
08/15 10:27:03 user FlashGateway: init
08/15 10:27:03 user MessageBrokerServlet: init
08/15 10:27:04 user CFFormGateway: init
08/15 10:27:04 user CFInternalServlet: init
08/15 10:27:04 user WSRPProducer: init
08/15 10:27:05 user ServerCFCServlet: init
08/15 10:36:30 user CFInternalServlet: destroy
08/15 10:36:36 user FlashGateway: destroy
08/15 10:36:36 user WSRPProducer: destroy
08/15 10:36:36 user CFCServlet: destroy
08/15 10:36:36 user CFMxmlServlet: destroy
08/15 10:36:36 user CFFormGateway: destroy
08/15 10:36:36 user CFSwfServlet: destroy
08/15 10:38:35 info No JDBC data sources have been configured for this server (see jrun-resources.xml)
08/15 10:38:35 info JRun Proxy Server listening on *:51800
08/15 10:38:35 info Deploying enterprise application "Adobe_ColdFusion_9" from: file:/C:/ColdFusion9/
08/15 10:38:35 info Deploying web application "Adobe ColdFusion 9" from: file:/C:/ColdFusion9/
08/15 10:38:36 user JSPServlet: init
08/15 10:38:37 user ColdFusionStartUpServlet: init
08/15 10:38:37 user ColdFusionStartUpServlet: ColdFusion: Starting application services
08/15 10:38:37 user ColdFusionStartUpServlet: ColdFusion: VM version = 14.3-b01
08/15 10:38:41 user ColdFusionStartUpServlet: ColdFusion: application services are now available
08/15 10:38:41 user CFMxmlServlet: init
08/15 10:38:41 user CFMxmlServlet: Macromedia Flex Build: 87315.134646
08/15 10:38:44 user CFSwfServlet: init
08/15 10:38:44 user CFCServlet: init
08/15 10:38:46 user FlashGateway: init
08/15 10:38:46 user MessageBrokerServlet: init
08/15 10:38:47 user CFFormGateway: init
08/15 10:38:47 user CFInternalServlet: init
08/15 10:38:47 user WSRPProducer: init
Here is our cf application log:
"Severity","ThreadID","Date","Time","Application","Message"
"Information","jrpp-0","06/25/11","19:24:19",,"C:\ColdFusion9\logs\application.log initialized"
"Error","jrpp-0","06/25/11","19:24:19",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-1","06/25/11","22:14:06",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-2","06/25/11","22:32:05",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Information","jrpp-3","06/26/11","11:45:13","CFADMIN","Invalid login for Default User"
"Error","jrpp-0","07/06/11","15:46:07",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-1","08/14/11","20:56:25","impager","Element DEPT is undefined in FORM. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinical\pagers\impager\sendpage.cfm, line: 1 "
"Error","jrpp-1","08/14/11","21:04:33",,"File not found: /CFIDE/main/ide.cfm The specific sequence of files included or processed is: C:\inetpub\wwwroot\CFIDE\main\ide.cfm'' "
"Error","jrpp-4","08/14/11","22:04:43","impager","Element DEPT is undefined in FORM. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinical\pagers\impager\sendpage.cfm, line: 1 "
"Error","jrpp-36","08/15/11","08:50:29","TEAMS_database","Variable MYPERIOD is undefined. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthly_entry.cfm, line: 220 "
"Error","jrpp-50","08/15/11","09:12:36",,"Invalid CFML construct found on line 2 at column 25.ColdFusion was looking at the following text:<p>=</p><p>The CFML compiler was processing:<ul><li>An expression that began on line 2, column 8.<br>The expression might be missing an ending #, for example, #expr instead of #expr#.<li>A cfset tag beginning on line 2, column 2.</ul> The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinpub\L2\ess\page3e.cfm, line: 2 "
"Error","jrpp-50","08/15/11","09:13:39",,"Invalid CFML construct found on line 2 at column 25.ColdFusion was looking at the following text:<p>=</p><p>The CFML compiler was processing:<ul><li>An expression that began on line 2, column 8.<br>The expression might be missing an ending #, for example, #expr instead of #expr#.<li>A cfset tag beginning on line 2, column 2.</ul> The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinpub\L2\ess\page3e.cfm, line: 2 "
"Error","jrpp-50","08/15/11","09:14:17",,"Invalid CFML construct found on line 42 at column 35.ColdFusion was looking at the following text:<p>=</p><p>The CFML compiler was processing:<ul><li>An expression that began on line 42, column 8.<br>The expression might be missing an ending #, for example, #expr instead of #expr#.<li>A cfset tag beginning on line 42, column 2.</ul> The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinpub\L2\ess\page4a.cfm, line: 42 "
"Error","jrpp-78","08/15/11","09:56:53","TEAMS_database","Variable MYPERIOD is undefined. The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthly_entry.cfm, line: 220 "
"Error","jrpp-75","08/15/11","10:10:12","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-80","08/15/11","10:10:46","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-78","08/15/11","10:11:28","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 124 "
"Error","jrpp-89","08/15/11","10:13:20","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 418 "
"Error","jrpp-88","08/15/11","10:13:52","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\login.cfm, line: 77 "
"Error","jrpp-82","08/15/11","10:14:35","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-92","08/15/11","10:16:25","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\login.cfm, line: 77 "
"Error","jrpp-84","08/15/11","10:18:11","impager","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\clinical\pagers\impager\pagerlist.cfm, line: 620 "
"Error","jrpp-89","08/15/11","10:19:37","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_1.cfm, line: 233 "
"Error","jrpp-80","08/15/11","10:22:19","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_1.cfm, line: 154 "
"Error","jrpp-92","08/15/11","10:23:24","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\login.cfm, line: 84 "
"Error","jrpp-96","08/15/11","10:24:12","TEAMS_database","The request has exceeded the allowable time limit Tag: cfoutput The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_2.cfm, line: 157 "
"Error","jrpp-95","08/15/11","10:24:12","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_1.cfm, line: 233 "
"Error","jrpp-14","08/15/11","10:31:03","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 9 "
"Error","jrpp-2","08/15/11","10:31:33","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\sow.cfm, line: 144 "
"Error","jrpp-15","08/15/11","10:32:04","TEAMS_database","Error Executing Database Query.Timed out trying to establish connection The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\TA_entry.cfm, line: 154 "
"Error","jrpp-1","08/15/11","10:32:15","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 124 "
"Error","jrpp-12","08/15/11","10:32:58","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\sow.cfm, line: 169 "
"Error","jrpp-10","08/15/11","10:33:21","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\monthlyentry1a.cfm, line: 418 "
"Error","jrpp-4","08/15/11","10:33:43","TEAMS_database","The request has exceeded the allowable time limit Tag: CFQUERY The specific sequence of files included or processed is: C:\inetpub\wwwroot\cf\tpep\teendata\entry_2011_2.cfm, line: 233 "
Please let me know if any other data would be usefull.Hi,
I expect the error details in CF9\runtime\logs\coldfusion-out.log will like provide a clue as to problem.
For a more long term plan I think you should do what you can to migrate the ACCESS data to SQL or some other database.
HTH, Carl. -
Strange response time for an RFC call viewed from STAD on R/3 4.7
Hello,
On our R/3 4.7 production system, we have a lot of external RFC calls to execute an abap module function. There are 70 000 of these calls per day.
The mean response time for this RFC call is 35 ms.
Some times a few of them (maybe 10 to 20 per day) are way much longer.
I am currently analysing with STAD one of these long calls which lasted 10 seconds !
Here is the info from STAD
Response time : 10 683 ms
Total time in workprocess : 10 683 ms
CPU time : 0 ms
RFC+CPIC time : 0 ms
Wait for work process 0 ms
Processing time 10.679 ms
Load time 1 ms
Generating time 0 ms
Roll (in) time 0 ms
Database request time 3 ms
Enqueue time 0 ms
Number Roll ins 0
Roll outs 0
Enqueues 0
Load time Program 1 ms
Screen 0 ms
CUA interf. 0 ms
Roll time Out 0 ms
In 0 ms
Wait 0 ms
Frontend No.roundtrips 0
GUI time 0 ms
Net time 0 ms
There is nearly no abap processing in the function module.
I really don't uderstand what is this 10 679 ms processing time especially with 0 ms cpu time and 0 ms wait time.
A usual fast RFC call gives this data
23 ms response time
16 ms cpu time
14 ms processing time
1 ms load time
8 ms Database request time
Does anybody have an idea of what is the system doing during the 10 seconds processing time ?
Regards,
OlivierHi Graham,
Thank you for your input and thoughts.
I will have to investigate on RZ23N and RZ21 because I'm not used to use them.
I'm used to investigate performance problems with ST03 and STAD.
My system is R/3 4.7 WAS 6.20. ABAP and BASIS 43
Kernel 6.40 patch level 109
We know these are old patch levels but we are not allowed to stop this system for upgrade "if it's not broken" as it is used 7/7 24/24.
I'm nearlly sure that the problem is not an RFC issue because I've found other slow dialog steps for web service calls and even for a SAPSYS technical dialog step of type <no buffer>. (what is this ?)
This SAPSYS dialog step has the following data :
User : SAPSYS
Task type : B
Program : <no buffer>
CPU time 0 ms
RFC+CPIC time 0 ms
Total time in workprocs 5.490 ms
Response time 5.490 ms
Wait for work process 0 ms
Processing time 5.489 ms
Load time 0 ms
Generating time 0 ms
Roll (in+wait) time 0 ms
Database request time 1 ms ( 3 Database requests)
Enqueue time 0 ms
All hundreds of other SAPSYS <no buffer> steps have a less than 5 ms response time.
It looks like the system was frozen during 5 seconds...
Here are some extracts from STAD of another case from last saturday.
11:00:03 bt1fsaplpr02_PLG RFC R 3 USER_LECKIT 13 13 0 0
11:00:03 bt1sqkvf_PLG_18 RFC R 4 USER_LECDIS 13 13 0 0
11:00:04 bt1sqkvh_PLG_18 RFC R 0 USER_LECKIT 19 19 0 16
11:00:04 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 77 77 0 16
11:00:04 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 13 13 0 0
11:00:04 bt1sqkvf_PLG_18 RFC R 4 USER_LECDIS 14 14 0 16
11:00:05 bt1sqkvg_PLG_18 RFC R 0 USER_LECKIT 12 12 0 16
11:00:05 bt1sqkve_PLG_18 RFC R 4 USER_LECKIT 53 53 0 0
11:00:06 bt1sqkvh_PLG_18 RFC R 0 USER_LECKIT 76 76 0 0
11:00:06 bt1sqk2t_PLG_18 RFC R 0 USER_LECDIS 20 20 0 31
11:00:06 bt1sqk2t_PLG_18 RFC R 0 USER_LECKIT 12 12 0 0
11:00:06 bt1sqkve_PLG_18 RFC R 4 USER_LECKIT 13 13 0 0
11:00:06 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 34 34 0 16
11:00:07 bt1sqkvh_PLG_18 RFC R 0 USER_LECDIS 15 15 0 0
11:00:07 bt1sqkvg_PLG_18 RFC R 0 USER_LECKIT 13 13 0 16
11:00:07 bt1sqk2t_PLG_18 RFC R 0 USER_LECKIT 19 19 0 0
11:00:07 bt1fsaplpr02_PLG RFC R 3 USER_LECKIT 23 13 10 0
11:00:07 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 38 38 0 0
11:00:08 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 20 20 0 16
11:00:09 bt1sqkvg_PLG_18 RFC R 0 USER_LECDIS 9 495 9 495 0 16
11:00:09 bt1sqk2t_PLG_18 RFC R 0 USER_LECDIS 9 404 9 404 0 0
11:00:09 bt1sqkvh_PLG_18 RFC R 1 USER_LECKIT 9 181 9 181 0 0
11:00:10 bt1fsaplpr02_PLG RFC R 3 USER_LECDIS 23 23 0 0
11:00:10 bt1sqkve_PLG_18 RFC R 4 USER_LECKIT 8 465 8 465 0 16
11:00:18 bt1sqkvh_PLG_18 RFC R 0 USER_LECKIT 18 18 0 16
11:00:18 bt1sqkvg_PLG_18 RFC R 0 USER_LECKIT 89 89 0 0
11:00:18 bt1sqk2t_PLG_18 RFC R 0 USER_LECKIT 75 75 0 0
11:00:18 bt1sqkvh_PLG_18 RFC R 1 USER_LECDIS 43 43 0 0
11:00:18 bt1sqk2t_PLG_18 RFC R 1 USER_LECDIS 32 32 0 16
11:00:18 bt1sqkvg_PLG_18 RFC R 1 USER_LECDIS 15 15 0 16
11:00:18 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 13 13 0 0
11:00:18 bt1sqkve_PLG_18 RFC R 4 USER_LECDIS 14 14 0 0
11:00:18 bt1sqkvf_PLG_18 RFC R 4 USER_LECKIT 69 69 0 16
11:00:18 bt1sqkvf_PLG_18 RFC R 5 USER_LECDIS 49 49 0 16
11:00:18 bt1sqkve_PLG_18 RFC R 5 USER_LECKIT 19 19 0 16
11:00:18 bt1sqkvf_PLG_18 RFC R 5 USER_LECDIS 15 15 0 16
The load at that time was very light with only a few jobs starting :
11:00:08 bt1fsaplpr02_PLG RSCONN01 B 31 USER_BATCH 39
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 31 USER_BATCH 34
11:00:08 bt1fsaplpr02_PLG /SDF/RSORAVSH B 33 USER_BATCH 64
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 33 USER_BATCH 43
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 34 USER_BATCH 34
11:00:08 bt1fsaplpr02_PLG RSBTCRTE B 35 USER_BATCH 37
11:00:09 bt1fsaplpr02_PLG RVV50R10C B 34 USER_BATCH 60
11:00:09 bt1fsaplpr02_PLG ZLM_HDS_IS_PURGE_RESERVATION B 35 USER_BATCH 206
I'm thinking also now about the message server as there is load balancing for each RFC call ?
Regards,
Olivier -
Where is the Print Settings Dialog?
Hello everyone,
I was trying to print sheet music from my Sibelius application. It would not print the final bar. I changed the black ink on my Canon i850 and updated the driver. Still the final bar would not print.
I posted my issue on the Sibelius discussion site and was told to open the File>Print dialog, go to the Print Settings dialog, then set "substitute resolution" to 300, if I am using Mac OS 10.4.
I am using Mac OS 10.4.6. I tried to follow the instructions but I couldn't because I could not find a Print Settings dialog.
How can I find 'Substitute resolution' in my computer?Hi there,
When you click File you should have 'Page Setup' and 'Print' as menu options.
If you select 'Print' you will see the print dialog window. If you do not see a menu that is defaulted to 'Copies & Pages', then the application may have what is called a Simplified Print dialog, similar to what you get with Preview. But you should have an option to select Advanced, which will open the normal print window. Here you should be able to select your resolution, depending on which driver you are using for the i850.
The other thing I would check is File > Page Setup. If the sheet is set to A4 but your printed page is set to Letter, then you can loose about 20mm (which is close to an inch) from the bottom of the print (FYI - A4 is 297mm long while Letter is 279mm).
Regards,
Paul -
Can't open Print Settings dialog
All of the sudden I cannot open the print settings dialog from the print window in Aperture. Every time I click the button, I get this in console:
3/22/08 3:16:22 PM Aperture[574] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/22/08 3:16:22 PM Aperture[574] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x93fa7eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x93fa8023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x94d95044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9149fe20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x915dcf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x915d7657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009ec21 (in Aperture)
0x001288e4 (in Aperture)
0x91471e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x91471d94: -[NSControl sendAction:to:] (in AppKit)
0x91471c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x91471273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x91470ac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x91470380: -[NSControl mouseDown:] (in AppKit)
0x9146eac3: -[NSWindow sendEvent:] (in AppKit)
0x00983eba (in ProKit)
0x9143b714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x913990f9: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
anybody else with this problem?
(could this be related to this??? http://discussions.apple.com/thread.jspa?messageID=6559834�)Nothing new to add other than I am getting the identical behavior. The output on my console appears to match to OP's. Any help would be appreciated. This is on Aperture 2.0.1 with all the security and other updates applied.
3/24/08 10:00:58 AM Aperture[29084] * Assertion failure in -[RedRock _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:], /SourceCache/AppKit/AppKit-949.27/AppKit.subproj/NSApplication.m:2998
3/24/08 10:00:58 AM Aperture[29084] Main Thread Exception in Aperture: Modal session requires modal window
Backtrace:
0x0007043d (in Aperture)
0x912e1eb7: +[NSException exceptionWithName:reason:userInfo:] (in CoreFoundation)
0x912e2023: +[NSException raise:format:arguments:] (in CoreFoundation)
0x965f6044: -[NSAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] (in Foundation)
0x9337ee20: -[NSApplication _commonBeginModalSessionForWindow:relativeToWindow:modalDelegate:didEndSelector :contextInfo:] (in AppKit)
0x009609ec (in ProKit)
0x00362b6d (in Aperture)
0x000a08c4 (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x93350d94: -[NSControl sendAction:to:] (in AppKit)
0x93350c1a: -[NSCell _sendActionFrom:] (in AppKit)
0x93350273: -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x9334fac6: -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
0x0099cd07 (in ProKit)
0x9334f380: -[NSControl mouseDown:] (in AppKit)
0x9334dac3: -[NSWindow sendEvent:] (in AppKit)
0x00982c3e (in ProKit)
0x9331a714: -[NSApplication sendEvent:] (in AppKit)
0x0036a608 (in Aperture)
0x934bbf43: -[NSApplication _realDoModalLoop:peek:] (in AppKit)
0x934b6657: -[NSApplication runModalForWindow:] (in AppKit)
0x001bc7bc (in Aperture)
0x0009e8c1 (in Aperture)
0x0004415f (in Aperture)
0x93350e56: -[NSApplication sendAction:to:from:] (in AppKit)
0x0096022d (in ProKit)
0x003627ee (in Aperture)
0x933ff7cc: -[NSMenu performActionForItemAtIndex:] (in AppKit)
0x933ff4d1: -[NSCarbonMenuImpl performActionWithHighlightingForItemAtIndex:] (in AppKit)
0x933dc3ae: AppKitMenuEventHandler (in AppKit)
0x90ef4fc3: DispatchEventToHandlers(EventTargetRec*, OpaqueEventRef*, HandlerCallRec*) (in HIToolbox)
0x90ef43fd: SendEventToEventTargetInternal(OpaqueEventRef*, OpaqueEventTargetRef*, HandlerCallRec*) (in HIToolbox)
0x90f10e0e: SendEventToEventTarget (in HIToolbox)
0x90f4586d: SendHICommandEvent(unsigned long, HICommand const*, unsigned long, unsigned long, unsigned char, OpaqueEventTargetRef*, OpaqueEventTargetRef*, OpaqueEventRef**) (in HIToolbox)
0x90f6bfbf: SendMenuCommandWithContextAndModifiers (in HIToolbox)
0x90f6bf7c: SendMenuItemSelectedEvent (in HIToolbox)
0x90f6be7e: FinishMenuSelection(MenuData*, MenuData*, MenuResult*, MenuResult*, unsigned long, unsigned long, unsigned long, unsigned char) (in HIToolbox)
0x90f48b1e: MenuSelectCore(MenuData*, Point, double, unsigned long, OpaqueMenuRef**, unsigned short*) (in HIToolbox)
0x90f48509: _HandleMenuSelection2 (in HIToolbox)
0x90f4837d: _HandleMenuSelection (in HIToolbox)
0x93318f77: _NSHandleCarbonMenuEvent (in AppKit)
0x9327fc72: _DPSNextEvent (in AppKit)
0x9327f08e: -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] (in AppKit)
0x0036228e (in Aperture)
0x932780c5: -[NSApplication run] (in AppKit)
0x00960e5a (in ProKit)
0x00003872 (in Aperture)
0x00003799 (in Aperture) -
I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred
Is your Photoshop CS5 updated to 12.1?
Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
Did you apply the recent Epson software 2.1.9 update?
What type of file is it (file format)? What bit depth and what color space?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Significant difference in response times for same query running on Windows client vs database server
I have a query which is taking a long time to return the results using the Oracle client.
When I run this query on our database server (Unix/Solaris) it completes in 80 seconds.
When I run the same query on a Windows client it completes in 47 minutes.
Ideally I would like to get a response time equivalent on the Windows client to what I get when running this on the database server.
In both cases the query plans are the same.
The query and plan is shown below :
{code}
SQL> explain plan
2 set statement_id = 'SLOW'
3 for
4 SELECT DISTINCT /*+ FIRST_ROWS(503) */ objecttype.id_object
5 FROM documents objecttype WHERE objecttype.id_type_definition = 'duotA9'
6 ;
Explained.
SQL> select * from table(dbms_xplan.display('PLAN_TABLE','SLOW','TYPICAL'));
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)|
| 0 | SELECT STATEMENT | | 2852K| 46M| | 69851 (1)|
| 1 | HASH UNIQUE | | 2852K| 46M| 153M| 69851 (1)|
|* 2 | TABLE ACCESS FULL| DOCUMENTS | 2852K| 46M| | 54063 (1)|
{code}
Are there are configuration changes that can be done on the Oracle client or database to improve the response times for the query when it is running from the client?
The version on the database server is 10.2.0.1.0
The version of the oracle client is also 10.2.0.1.0
I am happy to provide any further information if required.
Thank you in advance.I have a query which is taking a long time to return the results using the Oracle client.
When I run this query on our database server (Unix/Solaris) it completes in 80 seconds.
When I run the same query on a Windows client it completes in 47 minutes.
There are NO queries that 'run' on a client. Queries ALWAYS run within the database server.
A client can choose when to FETCH query results. In sql developer (or toad) I can choose to get 10 rows at a time. Until I choose to get the next set of 10 rows NO rows will be returned from the server to the client; That query might NEVER complete.
You may get the same results depending on the client you are using. Post your question in a forum for whatever client you are using. -
All,
I am in a predicament with internet browsing speeds...We have a 3rd party look after our line and internet facing f/w so I cant troubleshoot them, so at the moment Im looking at ISA as the potential bottleneck - we have a fairly standard environment:
Internal > Local Host > Perimiter n/work > Firewall > Internet
I have been running custom reports on the ISA server to see what data can be collected - I have noticed that "Average response time for non cached requests" (traffic by time of day) can be as high as 76 seconds!!!!!! Cached hits are between .5
and 2 seconds.
I have also coonfigured a connectivity verifier which is also flagging slow connectivity, massively over the >5000ms and also reporting "cant resolve server name on occassions- and this is configured for
www.Microsoft.com --- DNS ???!?!, however I have looked through DNS (no obvious errors / config issues) which I can see
I have run the BPA on ISA server to ensure its Health - - connectivity verifier errors flagged timeouts to microsoft.com as expected...
Can anyone advise any obvious areas to investigate as Im struggling! - as always the 3rd party have told us the internet pipe is fine :OProblem resolved.
DNS forwarders have been changed on the ISA server / DNS and this has improved lookup speed considerably.
thanks all :) -
EJB slow response time in cluster
We have 2 clusters : cluster 1(3 managed servers) and cluster2( 2 managed servers). We have an EJB deployed on cluster2 which is being called by an application on cluster1. Issue is that this EJB gives a very slow response time (in the order of minutes). There are no errors or exceptions in the logs.
When we shut down one of the nodes on cluster2, the respose from the same EJB is very fast. Please help as to where we should look out for the issue?Could be that you have a network configuration problem. The source of the problem is how host names and IP addresses are resolved,
and there is a workaround. RMI and other naming services use the InetAddress class to obtain resolved host names and IP addresses.
InetAddress caches lookup results to improve subsequent calls, but when it is passed a new IP address or host name, it performs a
cross-reference between the IP address and the host name to prevent address spoofing. If you supply the host name as an IP address,
InetAddress still tries to verify the name of the host. To workaround this problem, include the host name and IP address in the
hosts file on the client, for example,
127.0.0.1 localhost
172.30.0.129 SomeWebLogicServerHostName
172.30.0.130 SomeOtherWebLogicServerHostName -
After a surfing session a few weeks ago the response time for my AirPort internet connection became painfully slow. When I plug in to the wired connection it works fine. Resetting the router and modem doesn't seem to fix it. What might have happened and what can I do to fix it?
It is very possible that you may have some form of Wi-Fi interference that appears during these hours that is preventing your AirPort Base Station from providing a clean RF signal.
I suggest you perform a simple site survey, using utilities like iStumbler, Wi-Fi Explorer or AirRadar to determine potential areas of interference, and then, try to either eliminate or significantly reduce them where possible. -
Very slow response, stopping for seconds in the middle of typing an email
I'm having very slow response time with Firefox, so much so that I've switched to IE (gasp!). It'll stop suddenly for several seconds in the middle of typing an email and I have to wait to start typing again. Websites are timing out or just taking a very long time to respond after clicking on something. Yahoo in particular is extremely slow.
For me, I think the "Skype Click to Call 5.11.0.9874" addon was causing the slow response. Once I disabled this addon Firefox was responding normally.
Maybe you are looking for
-
Read data from a text file, one line at a time.
I need to read data from a text file, and display each line in a String Indicator on Front Panel. It displays each line, but I get Error 4, End Of Line, unless I enter an extra line of data in the file that I don't need. I tried Read From Text File.v
-
How do I restore Firefox/Google home page without Yahoo?
In an attempt to delete Yahoo, my Home Page which features Google changed entirely and still shows Yahoo with all its add ons. Also now when closing a link page Mozilla shuts down and I have to start all over again. How can I restore what I had and t
-
SQL PATCH IN CLUSTER ENVIRONMENT
Dear All, One of my client is having SAP ECC6.0 , SQL 2005 , windows 2003 64 bit. They are having SQL 2005 version 9.00.1399 and according to SAP it is no more supported so they want to upgrade it to 9.00.4035. In DEV and QAS (non cluster environment
-
How to wrte the MDX language in 'Edit Column Formual' in Answer
Hi Experts, Is itpossible to implement the following requirement in OBIEE 11G ? How to wrte the MDX language in 'Edit Column Formual' in Answer, like below express in Logic Layer in BMM: EVALUATE_AGGR('MAX( %1.members,[Is_Close])', "Sales Cube"."Sale
-
Where is Mt. Lion download saved to?
I just downloaded 10.8.5 but can't find it anywhere..not in the applications folder and not by using SpotLight... Download took all night and I was greeted this morning with a big mt. lion face and a continue button; all I want is the download of 10.