Slow running programs part two..

Okay, so I'm posting this for my husband that is currently deployed and having issues with his macbook that he just purchased right before he left (Febuary). His computer is now giving him troubles with programs taking ages to load. He said that one program took about 3 hours to load completely. What/any advice can I give him to resolve this issue? He has the warrenty package but since I'm in Alaska, shipping costs are expensive and we'd like to avoid them as much as possible. Please help if you know of any suggetions that I can give him and what not. Thank you!
this is the post I got from a helper:
Well, yes, three hours is too long. However, is it possible that he is trying to access programs over the internet? What I mean is he sure that the program he is trying to run is physically present on his local hard drive (in its entirety)?
If it is on his local drive, then the long load times _may_ be being caused by a hard drive problem. He should run the verify disk and verify permissions checks using Apple's Disk Utility (located in /Applications/Utilities). If he finds any problems he should make certain that he has backups of his important data and then run the repair options within Disk Utility. Also make certain that the disk's S.M.A.R.T. status is shown as OK (look at lower right side of window in Disk Utility).
If the disks check okay then he should run Apple's Hardware diagnostics. To do that, shutdown the computer, hold down the "D" key and restart the MacBook (while still holding down on the "D" key). Continue to hold the "D" key down and after a while a window should appear with instructions on how to run the diagnostics (at this time he may, of course, release the "D" key).
After My husband tried it This is what he said:
ok tell em i do the verify disk permissions and nothing comes up and then i rerify the disk and it says invalid node structure volume check failed error:filesystem verify or repair failed
Macbook model a1278

I have become cheesed off with the slow speed at
which my Java programs execute.This might not be Java's fault.
I believe that Java doesn't really compile its source code, It compiles java into byte-code.
rather it converts it into some other kind of wierd stuff thatThere is stuff involved, but it is not that wierd. :)
will work on any computer. As you have guessed, there
is a lot I don't really understand (eg I can't see
the difference between one PC and the next). Not all computers are PCs, but you make your point clearly.
What I'm getting at is this: is there such a thing as a Java compiler?There is a java compiler which compiles to machine code.
Is it any good? Many libraries including Swing don't work.
And will it make much of a difference?A poorly written program will run slow in any lanuage. An efficient program will run fast in Java. If you have to you can use JNI, but it is unlikely to be your answer.

Similar Messages

  • Slow-running programs

    I have become cheesed off with the slow speed at which my Java programs execute. I believe that Java doesn't really compile its source code, rather it converts it into some other kind of wierd stuff that will work on any computer. As you have guessed, there is a lot I don't really understand (eg I can't see the difference between one PC and the next). What I'm getting at is this: is there such a thing as a Java compiler? Is it any good? And will it make much of a difference?

    I have become cheesed off with the slow speed at
    which my Java programs execute.This might not be Java's fault.
    I believe that Java doesn't really compile its source code, It compiles java into byte-code.
    rather it converts it into some other kind of wierd stuff thatThere is stuff involved, but it is not that wierd. :)
    will work on any computer. As you have guessed, there
    is a lot I don't really understand (eg I can't see
    the difference between one PC and the next). Not all computers are PCs, but you make your point clearly.
    What I'm getting at is this: is there such a thing as a Java compiler?There is a java compiler which compiles to machine code.
    Is it any good? Many libraries including Swing don't work.
    And will it make much of a difference?A poorly written program will run slow in any lanuage. An efficient program will run fast in Java. If you have to you can use JNI, but it is unlikely to be your answer.

  • I keep geting this message when trying to udate to Itunes 10.5.1 "There is a problem with the Windows Installer package. A program run as part odf the setup did not finish as expected . Contact your support prersonel or package vender"

    I keep getting this message when trying to upgrade to Itunes 10.5.1
    Driving me nuts trying to upgrade. What can I do to correct this?
    "There is a problem with the Windows Installer package.
    A program run as part odf the setup did not finish as expected .
    Contact your support prersonel or package vender"

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • When attempt to download 10.5, receive message: "...problem with this widows installer package. a program run as part of the set up did not finish as expected. ..." -- what to do?

    I have attempted to upgrade my iPad which is necessar to downloan an app I want (My Radar).  The iTunes on my computer will not process the upgrade of 10.5 without message:  "There is a problem with this Windows Installer Package. A program run as part of the set up did not finish as expected. Contract your support personnel or packae vendor."  ..... Little old lady needs help, my iTunes "appears to be 10.5 on my PC; however, will not upgrade my iPad.  I have BitDefender as the "protector" on my PC if that is the issue.

    Go to support.microsoft.com/fixit
    In section 2 click on: Install or upgrade software or hardware
    Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
    This link may get you there:  http://support.microsoft.com/mats/Program_Install_and_Uninstall/
    Let it run and then try to download it again

  • When I try to install iTunes 10.5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    5, it says, "There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor."  I have Windows XP and I need help.

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

  • I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ??

    I am trying to update to iTunes 10.5 and am getting a Apple Software update error. "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. ?? I can't uninstall the Apple Software Update from my Control Panel. It states "Fatal error during installation" Please HELP!!!

    I am experiencing the exact same issue during the installtion process for iTunes 10.5.
    I uninstalled all Apple components but when I attempted to uninstall the Apple Software Update I received the same message: "Fatal error during installtion." I was able to repair the Apple Software Update but still could not install iTunes 10.5 afterwards.
    I have tried everything that I could find on these discussions pages as well as other suggestions on third party sites. I continue to receive the error message: "There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.
    I was able to uninstall and reinstall QuickTime 7.7.1. During the reinstalltion process I received the same message (There is a problem with this Windows Installer Package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.) But after clicking "OK" the installtion process was succesful. PLEASE HELP!

  • What to do when installing itunes to windows vista home basic an message appears saying"there is a problem with this windows installer package.A program run as part of the setup did not finish as expected.Contact your support personnel or package vendor."

    what do i do when trying to install itunes to my windows vista home basic computer and a message appears saying
    "There is a problem with this windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor."
    Need to know because this is driving me nuts now!

    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Error when downloading itunes 10.5 that says Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package ven

    Each time I attempt to download the new itunes 10.5 I keep getting the following error message:
    Product: Apple Software Update -- Error 1722. There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action SoftwareUpdate_UnregServer, location: C:\Program Files\Apple Software Update\SoftwareUpdate.exe, command: /UnregServer
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Any Ideas of how to solve this one?

    After reading all these posts, one by one did not resolve my problem until I got the very end.  Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
    1. Stand alone upgrade to the latest Quicktime version
    2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
    iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
    Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
    Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
    Great work everyone who contributed!  Thank you very much!

  • Trying to down load Itunes but I get a message : There is a problem with this Windows Installer package a program run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

    When downloading Itunes I get this message:
    There is a problem with this Windows Installer package a Program run as part of the setup did not finish as expected.
    Contact your support personnel or package vendor..
    is there a number for me to call or can someone explain what has happen...
    Thank you for your help....

    Try the following user tip:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • I keep getting a message that "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." when I try to download iTunes 10.5. So I can't update it. How can it be fixed?

    When I try to download iTunes 10.5, I keep getting the message "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected." Therefore I can't update my iTunes to the new version. How can I solve this? I don't want to pay for technical support as this seems to be a problem with the iTunes package Apple is providing itself by that message.

    Hello, hartadrian.
    I would recommend attempting to repair the Apple Software Update via the steps below.  Once processed attempt to download, update or install iTunes 11. 
    How to repair Software Update for Windows
    http://support.apple.com/kb/TA24326
    If you are still experiencing the issue, completely remove all components of iTunes in the order specified of the article below.  Once this has been processed, attempt to download and install iTunes 11. 
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    If you experiencing errors when removing components of iTunes, follow the steps in the article below. 
    "The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
    http://support.apple.com/kb/TS3704
    Cheers,
    Jason H. 

  • When installing itunes 10 uding windows xp I get the following error: "There is a problem with this Windows Installerpackage. A program run as part of the setup did not finish as expected. Contact your sipport personnel or package vendor." - any ideas?

    When downloading itunes 10 in windows xp, I get the following error "There is a problem with this Windoes Installer package. Aprogram run as part of the setup did not finish as expected. Contact your support personnel or package vendor." - any ideas on how to proceed?

    using MSICUU2.exe didn't help me.  But,  the new replacement app did:
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    I fixed my problem like this:
    Here's the deal - 
    1.  can you install itunes via the APPLE SOFTWARE updater?
    I couldn't  so I downloaded ITUNES and tried to install it that way.   Hence  I got the same error hang as you.  Nothing worked,  (Multiple attempts at uninstall reinstall,  stopping of Services,  Reg cleaners  etc..)
    2.  If answer is NO to #1 you must fixe the APPLE SOFTWARE UPDATE Program. 
    OK  so I couldn't find a Download for this.   But:  if you have WINRAR,  open the ITUNES.EXE and extract the APPLESOFTWAREUPDATE.MSI file.  Execute the APPLESOFTWAREUPDATE.MSI separately.   And you will not be able to install it and have a similar issue as per your Itunes install.   This of course leads you to believe that the Itunes.exe  install is also installing all of these components including the applesoftwareupdate silently.   It must BOMB at that portion of the install and you are done. 
    3.  Your goal now is to get the applesoftwareupdate installed.   How do you do this.  Well -  here is what I did.
      a.  downloaded and RUN a PC  Installer FIX it tool from Microsoft.  This is a replacement for the older MSI fixer they used to use.
      http://support.microsoft.com/mats/Program_Install_and_Uninstall
    b. It will list programs to attempt to fix.
      choose  AppleSoftwareUpdate.msi
    c. Once it is done,  then reinstall apple program updater using
    AppleSoftwareUpdate.msi
    Finally it should install since the Microsoft tool appraently fixed corrupted installation files in your registry for this application.
    (Please note:  that I also disabled any apple related services such as BONJOUR or IPOD DEvice RUN:  services.msc to get there -  although this man not be necesarry.)
    Hence Launch this APPLE UPDATE SOFTWARE (Click the ICON in your Start menu)  it should list ITUNES
    select ITUNES from here and it will update.
    KEY HERE is to ONLY UPDATE APPLE Stuff via the APPLE SOFTWARE UPDATE program.  If that program is not working fix it.  Then Bingo.
    I am sorry to see folks having this problem for weeks.  
    APPLE,   Spread the word.  PC's can get corruption in the registry on your product should the update be stopped or computer shut off during an update.  etc...   Please improve your software updater program to check for invalid registry upon launching the app.  This will prevent people thinking it is an APPLE issue.  It appears to be a problem on your PC's registry settings for the APPLE Software update.
    Bruno Ricci

  • HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

    Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
    Would appreciate help...its driving me up the wall!!

    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • When I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  rein

    when I try to install icloud on my laptop running windows 7 home premieum I get message saying the windows installer package wont complete as a program run as part of setup did not finish as expected   the install then rolls back   I have tried  reinstall   deleting files signing on with another account etc  nothing works   I have read this is an apple programing problem  if so is there a fix  I need iclouds  thanks

    This other discussion may help: Re: how do I install icloud

  • Therer is a problem with this windows installer package. A program run as part of the setup did not finish as expected.  Contact  your support personnel or package vendor.  This is on Windows 7.  Is there an easy fix?

    When trying to install an itune upgrade on a Windows 7 machine I get the following message: There is a problem with this Windows Installer package.  A program run as part of the setup did not finish as expected.  Contact your support personnel or package vendor.  One solution I found by googling is to go to Control panel/add/remove programs and REPAIRING THE APPLE SOFTWARE UPDATE.  Don't seem to work for me tho......any solutions?  Thanks

    I finally found a reply that said to go to the Apple Installer and repair and it seems to have worked!  I was looking for a Windows installer all the time.  Thanks to whoever put that fix out there.

  • Am getting the following message when trying to download latest upgrade. "a problem with Windows Installer Package, a program run as part of the setup did not finish as expected" Upgrade did not happen. Any suggestions ?

    Am getting a message when downloading latest iTunes upgrade:
    "There is a problem with this Windows Installer Package.
    A program run as part of the setup did not finish as expected"
    It doesn't give me any specific information about what or where the problem is.
    Any Suggestions

    Repair your Apple Software Update.
    Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
    If you don't find ASU in All Program, go to Control Panel, Add & Remove programs and repair it.

Maybe you are looking for

  • Multiple Apple TVs but one ID

    Hi, My sister has two apple TVs, but only one apple ID with lots of Movies and TV show that she was bought. Can she play two different tv shows at the same time on two different Apple Tv Thank you

  • Migration issues with DataBindings.cpx Jdev 10.1.2 to 10.1.3

    Hey Guys, I have had a look at the docco for migrating between JDeveloper 10.1.2 and 10.1.3 in relation to the databindings.cpx file with no luck. Anyway, with no changes other than the migration, the deployment will fail because it cant find the dat

  • Using Photoshop as external editor

    On a 64 bit machine with the 64 bit version of LR installed, evoking Photoshop as external editor still incorrectly opens the 32 bit version of PS, not the 64 bit as used to happen with LR4. One can work around this if one remembers to open the 64 bi

  • SIMPLE QUESTION: DEFAULT SETTING FOR STILL CLIP DURATION

    I want to change it from :10 to :05 for stills that cue up in the Viewer window. The sequence needs to be all :05 cuts and I want to streamline this as much as possible. Many, many stills to throw into this sequence, and all the same length. Just not

  • Does anyone have a PowerShell script which change the paper source on a Canon Image Runner Advance?

    I came across this Powershell script on the web, which does a good job of printing out PDFs: Start-Process -FilePath "C:\Users\Test\Documents\Listing.pdf" –Verb Print -PassThru | %{sleep 10;$_} | kill Start-Process -FilePath "C:\Users\Test\Documents\