Slow save edit in sde9.3 for oracle 10g

hi all ...
i install arcsde 9.3 on oracle 10g and i load my data nice ..
problem is when i do calculate field and save edit command be very slow ...
i do not know the problem and not give error ... what i do , what i check ...
please help

As you are using ArcSDE I should ensure that it is configured correctly first. Either contact ESRI directly for advice if you have a contract with them or post on one ot their forum.
This is where ther are more problems in the initial setup.
Regards.
Ivan

Similar Messages

Long-term retention backup strategy for Oracle 10g

Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advance

Hello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM

Where can I download the ODBC driver for Oracle 10g XE?

where can I download the ODBC driver for Oracle 10g XE?
I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driver

already checked these http://www.connectionstrings.com/oracle, I need Help Please.

Errors using DBMS_SQLTUNE Advisors for Oracle 10g

I get errors trying to tune the below query for Oracle 10g using the DBMS_SQLTUNE advisors.
It happens when I wrap either a large block of PL/SQL code that uses bind variables or multiple nested subqueries with multiple JOIN conditions in a SELECT query statement that I wish to tune using the 10g SQLTUNE advisors.
Message was edited by:
benprusinski

Hi, I was trying to use the DBMS_SQLTUNE package to tune my sql statements used in the huge procedure. I can successfully create a task and execute it. But when I run report tuning task, I'm always getting error like the one in below example. Two questions I have now.
1) Is this becuase I'm using bind, but not passing any values?
2) Can I able to use to this package to tune a procedures instead of sql statement?
Example output...
SQL> SELECT DBMS_SQLTUNE.REPORT_TUNING_TASK( 'my_sql_tuning_task3')
2 FROM DUAL;
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
GENERAL INFORMATION SECTION
Tuning Task Name : my_sql_tuning_task3
Tuning Task Owner : SCOTT
Scope : COMPREHENSIVE
Time Limit(seconds) : 3000
Completion Status : COMPLETED
Started at : 02/26/2009 21:44:41
Completed at : 02/26/2009 21:44:41
Number of Errors : 1
DBMS_SQLTUNE.REPORT_TUNING_TASK('MY_SQL_TUNING_TASK3')
Schema Name: KPRAVEEN
SQL ID : 479831s42xj1n
SQL Text : SELECT a.pdrorn, a.pdrcto, a.pdrlln FROM f4311 a
WHERE a.pddoco = receiptsrcrec.prdoco AND a.pddcto = :2 AND
a.pdkcoo = :3 AND a.pdsfxo = :4 AND a.pdlnid = :5
ERRORS SECTION
SQL>

Nagios plugins for oracle 10g...

Hi there,
I'm on a quest for nagios plugins for oracle 10g.
Here is what I've found so far:
mathias-kettner.com/download/check_oracle_writeaccess -- good
nagios-plugins-1.4/contrib/check_ora_table_space.pl -- useless for 10g
nagios-plugins-1.4/plugins-scripts/check_oracle.sh -- useless for 10g
nagios-plugins-1.4/contrib/check_oracle_tbs -- good
nagios-plugins-1.4/contrib/check_oracle_instance.pl -- not sure yet
Where might I find more nagios plugins for oracle 10g (or 9i would be good too)?
Once I find them,
I'll be nice and post my findings here!
Thanks,
-R

Hi Eric,
I want to know whether Oracle 10g Standard Edition supports any extensibilty mechanism to do kerberos authentication using third party plugin or adapter.
Actually I want to implement/want support for some kerberos authentication adapter/plugins for oracle 10g SE.
Advanced Security Option of oracle comes only with Oracle Enterprise edition not with oracle 10g SE.
Thanks,
Sayantani

Vedio / Audio web based training for Oracle 10g DBA.

Hi Everyone,
I am looking for a free web based training / Vedio / Audio for Oracle 10g DBA.
Please help me out in the same.
Thanks & Regards,
Deepak
Edited by: [email protected] on May 15, 2009 9:48 PM

[email protected] wrote:
Hi Everyone,
I am looking for a free web based training / Vedio / Audio for Oracle 10g DBA.
Please help me out in the same.
Thanks & Regards,
Deepak
Edited by: [email protected] on May 15, 2009 9:48 PM
Deepak,
There is no free lunch anywhere in this world, and the same is true for the training as well of Oracle modules. If you can't get time out to attend an Instructor based training, you have two choices,
1) Self Study CD Roms Oracle offers the trainining in a self paced learning format with CD Roms which have all whatis needed to make one start and grow with the learning of a specific module. You can check which module you need and can order the cd rom for that. Learn more about this from here,
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=35
2) Live Virtual Class This is the newest standard that Oracle has introduced in the training formats. As the name suggests, this is a class which is surely taught by an instructor only but this doens't need you to come and attend a course at a specific location , for example at Oracle's education office. You can attend the prorgam while being at your home/office as well. It offers rich video/audio expereince which doesn't make you feel that you are just learning sitting in front of a computer. Learn more about it from here,
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=233
That said, both the options mentioned above are NOT free and there is NO free event happening anywhere which goes from the start to finish of a module. There are some small web events but they can't be called a training class as there are just some topics discussed in them. So once again, don't look for free lunch, its not there anywhere.
HTH
Aman....

Problem Pro*C for Oracle 10g

Hello,
I am compiling pro*c code for Oracle 10g, it is successfully compiling for Oracle 9i. But with Oracle 10g libs it's giving problems.
This following error msg I m getting while compiling
/application/Build/code/booking/>mk test
*.cpp: No such file or directory
make_depend
`/opt/oracle/10.2.0/lib/libclntsh.so' is up to date.
cat: cannot open *.u
proc ireclen=132 lines=yes iname=pcutils.pc oname=~pcutils.c
Pro*C/C++: Release 10.2.0.2.0 - Production on Sat May 26 07:39:59 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
System default option values taken from: /opt/oracle/10.2.0/precomp/admin/pcscfg.cfg
cc -c -DBA_SUN -xCC -I. -I/application/Build/include -I/application/2.6Build/include -I/opt/ba/include - -I/opt/tux80/include ~pcutils.c
"pcutils.pc", line 58: undefined struct/union member: sqlerrm
"pcutils.pc", line 58: undefined struct/union member: sqlerrmc
"pcutils.pc", line 58: warning: left operand of "." must be struct/union object
"pcutils.pc", line 79: undefined struct/union member: sqlerrm
"pcutils.pc", line 79: undefined struct/union member: sqlerrmc
"pcutils.pc", line 79: warning: left operand of "." must be struct/union object
cc: acomp failed for ~pcutils.c
*** Error code 2
make: Fatal error: Command failed for target `pcutils.o'
Could you please suggest me, what should I do in order to build it.
Inpreet

To answer my own question, I'd say it's necessary to install the tarball, NOT the Debian files, for the Enterprise edition (perhaps to Standard is enough?).
After installation at (for example) /usr/local/oracle, the "proc" precompiler should be at /usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/bin
The env.variable ORACLE_HOME should be set,
export ORACLE_HOME=/usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1

Pro*C for Oracle 10g in Debian Linux

Hi,
I've downloaded and installed the Debian packages for Oracle 10g XE, and I'm trying to compile a local copy of CASTOR http://www.cern.ch/castor
This software requires the Pro*C compiler. Where can I find/download it from?
Thanks in advance!

To answer my own question, I'd say it's necessary to install the tarball, NOT the Debian files, for the Enterprise edition (perhaps to Standard is enough?).
After installation at (for example) /usr/local/oracle, the "proc" precompiler should be at /usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/bin
The env.variable ORACLE_HOME should be set,
export ORACLE_HOME=/usr/local/oracle/u01/app/oracle/oracle/product/10.2.0/db_1

How to get best material for Oracle 10G PL/SQL

Please help me out to get best material for Oracle 10G PL/SQL form oracle site.
Thanks in Advance

There's no special book or material related Oracle 10g PL/SQL. Can you explain what you want ?
Please refer to this page for more information:
http://www.oracle.com/technology/tech/pl_sql/index.html
Edited by: Kamran Agayev A. on Aug 14, 2009 11:41 AM

License Fee for Oracle 10G.

Hi!
Please guide me regarding License Fee for Oracle 10G database.
Thanks & Regards.
Sukhvinder Singh

Oracle 10G Express Edition is free for any kind of use.
Oracle 10G downloaded from OTN is using a OTN license is only free for "developement activities":
>
We grant you a nonexclusive, nontransferable limited license to use the programs only for the purpose of developing, testing, prototyping and demonstrating your application, and not for any other purpose
>
Please read http://www.oracle.com/technetwork/licenses/standard-license-152015.html.

Error while creating datasource userdsn for oracle 10g Errorcode (998)

while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Oracle gateway for Oracle 10g DB on Windows 64 bit server

Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.

yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database?

Note 830576 - Parameter recommendations for Oracle 10g

hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,

hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards,

Can't Create the ODBC connection for Oracle 10g

Hi,
I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator library
Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
Best Regards,

mwz wrote:
I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not?

SAP Note 830576 - Parameter recommendations for Oracle 10g

As per SAP Note 830576 - Parameter recommendations for Oracle 10g, I have tried to change the value for
parameter "db_file_multiblock_read_count".
In sql prompt it shows:
SQL> show parameter DB_FILE_MULTIBLOCK_READ_COUNT
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     128
and in brtools it shows:
58 - db_file_multiblock_read_count      both     no      *       yes   128
But I got the following error, when i tried to set it null
1 * Parameter description (desc) ..... [db block to be read each IO]
2 * Parameter type (type) ............ [integer]
3 * Current parameter value (parval) . [128]
4 * Value in spfile (spfval) ......... []
5 # New parameter value (value) ...... [null]
6 - Scope for new value (scope) ...... [both]
7 # Database instance (instance) ..... []
8 ~ Comment on update (comment) ...... []
9 - SQL command (command) ............ [alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD']
BR0662I Enter your choice:
c
BR0280I BRSPACE time stamp: 2008-08-14 18.19.22
BR0663I Your choice: 'c'
BR0259I Program execution will be continued...
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0301E SQL error -32010 at location BrSqlExecute-1, SQL statement:
'/* BRSPACE / alter system reset db_file_multiblock_read_count scope = spfile sid = '''
ORA-32010: cannot find entry to delete in SPFILE
BR1017E Execution of SQL statement 'alter system reset db_file_multiblock_read_count scope = spfile sid = '*'; alter system reset db_file_multiblock_read_count scope = memory sid = 'MBD'' failed
BR0669I Cannot continue due to previous warnings or errors - you can go back to repeat the last action
BR0280I BRSPACE time stamp: 2008-08-14 18.19.23
BR0671I Enter 'b[ack]' to go back, 's[top]' to abort:
Kinldy let me know, what could me wrong.

Hi Markus,
As per your suggestion we have downloaded the files from UCLIB_3-20000978.SAR. But now getting the error as
sapccmsr -DCCMS -j2ee pf=profile value
INFO: use SAPLOCALHOST hostname
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/XX1_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/XX1_00/sapccmsr/csmconf
INFO: Central Monitoring System is [XX1]. (found in config file)
INFO: additional Central Monitoring System is [AS2]. (found in config file)
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH. It seems to be created as non-unicode segment.
This program runs as unicode. Please use non-unicode version
Please suggest
Thanks,
Anu

Slow save edit in sde9.3 for oracle 10g

Similar Messages

Maybe you are looking for