Slow saving on windows

Slow performance issues on Photoshop CS6
No Anti virus issues
No memory issues
CS6 on Windows takes 5 minutes to open the program
It takes 5 minutes to open a file and 10 minutes to save a file
I have uninstalled and reinstalled
Any advise to resolve this issue.
Thank you

>> CS6 on Windows takes 5 minutes to open the program
>> It takes 5 minutes to open a file and 10 minutes to save a file
You have something very, very wrong with your system.
Photoshop normally launches in 2 to 20 seconds (2 on an SSD, 20 on the worst laptop drive ever seen).
You could have bad hardware (which would slow everything down), a bad utility program (like a font manager, or antivirus), corrupt system files (including fonts), etc.

Similar Messages

Boot message: problem with hard drive detected. Slow loading of windows 7

Good Day
I am having a problem with my hard drive, everytime it boots these days it starts with a message: Warning: a problem with the hard drive has been detected, followed by an extremely slow loading of windows. then once in windows it gives me Anothet message
the messsage says hard drive failure imminent you should back up you data etc.
My specs are:
Intel core 2 duo e8400 3.0 ghz
4 gig ddr3 transcend
1 tb seagate 7200.12
giga byte nvidia 9800 gt 1 gig ddr3
Please help lots of data.

Another option:
Take your hard drive out and slave it into another KNOWN WORKING PC.
Back-up your data immediately. Slow boot usually indicates that the drive is going to die. (Check your warranty!)
Then, run "chkdsk /r" from the host PC to check the failing drive. (It is good to match OSes if you can.)
MCSE: 6771498

IMac & Macbook running slower than a Windows computer

Hello all, I need some help with my apple products. I spend half my day messing with the internet to try and get it going instead of sitting there with a blank look on its face. They freeze up to an extent. I generally can always close out Safari, shut off the wifi, then turn wifi on and safari will work somewhat better sometimes. Here is the Etre report for both the iMac and MacBook. Also on the MacBook report, I was digging around in my system report and found something that made me think it might be bad so i have included it as well. Please help me and keep me from wasting half my day every day. Thanks. There is several extra lines after the Macbook report that came from my system report. I don't know if it is pertinent or not but I feel like it is. I wasn't sure what to leave out so I just put it all in, sorry for the long post.
Note----- I took out the logs that were from the previous address I lived at. Just included from when I moved into new house.
THIS IS FOR THE iMac
Problem description:
Ever since I moved into this new house my apple computers have slowed down to granny speed and sometimes they just sit there and stare at you. I have an iMac from 2011, a mac book pro 2014, iPhone 6, iPhone 4s, and to top it off a windows computer that is used for graphic software. I have 2 TV’s that we use as well. My internet and cable are provided by ATT and at my old house it worked great, no problems. I have had ATT out twice since install in January. They have given me a new modem, and a booster to help increase the reach of the wireless internet. My internet is supposed to be 18mbs download and for the life of me can’t think of the upload speed. When testing I usually have a 10 to 11 download and a 1.80 upload speed. I have ran verify disk, fix permissions so many times and that it is ridiculous. My iMac is used in the back room which is about 30 feet from modem, that is why they gave me the booster the 2nd time out. The macbook is used just whereever. The speed of the Mac’s is slower then the Windows computer. That ain’t right. I don’t download anything, I don’t go to crazy suspect sites. I have taken the iMac to apple store and they tested it and said it was fine. I have re-installed the O.S. (Yosimiteme 10.10.3). I just want my apples to work properly again.
EtreCheck version: 2.2 (132)
Report generated 5/3/15, 8:22 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (21.5-inch, Mid 2010) (Technical Specifications)
    iMac - model: iMac11,2
    1 3.06 GHz Intel Core i3 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            Empty
        BANK 1/DIMM0
            Empty
        BANK 0/DIMM1
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM1
            2 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    ATI Radeon HD 4670 - VRAM: 256 MB
        iMac 1920 x 1080
        G206HQL 1600 x 900 @ 60 Hz
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:25:17
Disk Information: ℹ️
    WDC WD5000AAKS-40V6A0 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 499.25 GB (392.09 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
    OPTIARC DVD RW AD-5680H
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. Built-in iSight
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /System/Library/Extensions
    [not loaded]    com.Belcarra.iokit.USBLAN_netpart (2.0.2) [Click for support]
    [not loaded]    com.Belcarra.iokit.USBLAN_usbpart (2.0.2) [Click for support]
    [not loaded]    com.RemoteControl.USBLAN.usbpart (2.0.6) [Click for support]
    [not loaded]    com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) [Click for support]
        /System/Library/Extensions/Belcarra.USBLAN_netpart.kext/Contents/PlugIns
    [not loaded]    com.belcarra.iokit.netpart.panther (1.6.1) [Click for support]
        /System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/Contents/PlugIns
    [not loaded]    com.belcarra.iokit.usbpart.panther (1.6.1) [Click for support]
        /System/Library/Extensions/RemoteControl.USBLAN_usbpart.kext/Contents/PlugIns
    [not loaded]    com.RemoteControl.USBLAN.panther (1.6.1) [Click for support]
Startup Items: ℹ️
    HP IO: Path: /Library/StartupItems/HP IO
    Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [running]    com.flipvideo.FlipShare.AutoRun.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.hp.help.tocgenerator.plist [Click for support]
    [failed]    com.motive.alertDetectorHost.plist [Click for support] [Click for details]
    [failed]    com.motive.userAgent.plist [Click for support] [Click for details]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [running]    com.flipvideo.FlipShareServer.launchd.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.leapfrog.connect.shell.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [failed]    com.motive.systemDaemon.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    AdobeResourceSynchronizer    Application (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    HP Scheduler    Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    npMotive: Version: 1.0.0 - SDK 10.7 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
    SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    CouponPrinter-FireFox_v2: Version: Version 1.1.6
    JavaAppletPlugin: Version: Java 7 Update 45 Check version
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
Safari Extensions: ℹ️
    jbsearch
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    GamePadCompanionPrefPanel [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 499.25 GB Disk used: 107.15 GB
    Destinations:
        Seagate Backup Plus Drive [Local]
        Total size: 999.86 GB
        Total number of backups: 39
        Oldest backup: 2015-03-03 23:58:26 +0000
        Last backup: 2015-04-22 19:27:08 +0000
        Size of backup disk: Adequate
            Backup size 999.86 GB > (Disk used 107.15 GB X 3)
Top Processes by CPU: ℹ️
         3%    WindowServer
         2%    com.hp.devicemonitor
         1%    syncdefaultsd
         1%    fontd
         0%    Creative Cloud
Top Processes by Memory: ℹ️
    420 MB    kernel_task
    336 MB    mdworker(11)
    266 MB    com.apple.WebKit.WebContent(2)
    66 MB    Safari
    66 MB    Finder
Virtual Memory Information: ℹ️
    974 MB    Free RAM
    3.05 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 3, 2015, 07:55:19 PM    Self test - passed
This is for the MacBook
EtreCheck version: 2.2 (132)
Report generated 5/3/15, 8:23 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (Retina, 13-inch, Late 2013) (Technical Specifications)
    MacBook Pro - model: MacBookPro11,1
    1 2.4 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n/ac
    Battery: Health = Normal - Cycle count = 290 - SN = D863505T5JWFT5Y1L
Video Information: ℹ️
    Intel Iris
        Color LCD 2560 x 1600
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 20:35:40
Disk Information: ℹ️
    APPLE SSD SD0128F disk0 : (121.33 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 120.14 GB (52.28 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Library/Application Support/VirtualBox
    [not loaded]    org.virtualbox.kext.VBoxDrv (4.3.14) [Click for support]
    [not loaded]    org.virtualbox.kext.VBoxNetAdp (4.3.14) [Click for support]
    [not loaded]    org.virtualbox.kext.VBoxNetFlt (4.3.14) [Click for support]
    [not loaded]    org.virtualbox.kext.VBoxUSB (4.3.14) [Click for support]
        /System/Library/Extensions
    [loaded]    com.screenrecycler.driver.ScreenRecyclerDriver (1.4.13 - SDK 10.4) [Click for support]
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.AdobeCreativeCloud.plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [loaded]    org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.google.keystone.daemon.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.citrixonline.GoToMeeting.G2MUpdate.plist [Click for support]
    [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
    [not loaded]    org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
    o1dbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    googletalkbrowserplugin: Version: 5.41.0.0 - SDK 10.8 [Click for support]
    SharePointBrowserPlugin: Version: 14.4.9 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
    CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Click for support]
    WebEx64: Version: 1.0 - SDK 10.6 [Click for support]
Safari Extensions: ℹ️
    Buffer
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 120.14 GB Disk used: 67.85 GB
    Destinations:
        Seagate Backup Plus Drive [Local]
        Total size: 999.86 GB
        Total number of backups: 32
        Oldest backup: 2014-09-03 02:53:05 +0000
        Last backup: 2015-04-01 02:18:11 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 120.14 GB X 3)
Top Processes by CPU: ℹ️
         5%    WindowServer
         2%    tccd(2)
         2%    fontd
         1%    cloudd
         0%    taskgated
Top Processes by Memory: ℹ️
    546 MB    kernel_task
    135 MB    Safari
    78 MB    mdworker(5)
    70 MB    WindowServer
    61 MB    TextEdit
Virtual Memory Information: ℹ️
    372 MB    Free RAM
    3.63 GB    Used RAM
    90 MB    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 11:47:44 PM    Self test - passed
    May 2, 2015, 11:42:44 PM    /Library/Logs/DiagnosticReports/Safari_2015-05-02-234244_[redacted].hang
Logs:
syncservices.log:
Description: SyncServices Log
Date Modified: 05Apr15, 01:14
Size: 229 KB
Contents: ...
2015-01-08 01:14:34:505|SyncServer|5861|0x7fa649d11b80|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-08 01:16:34:956|SyncServer|5861|0x7fa649d11b80|Server|Info| Cancelling all sync plans.
2015-01-08 01:16:34:970|SyncServer|5861|0x7fa649d11b80|Server|Info| Goodnight, Gracie.
2015-01-09 23:24:28:259|SyncServer|757|0x7fa891603f40|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-09 23:28:34:911|SyncServer|757|0x7fa891603f40|Server|Info| Cancelling all sync plans.
2015-01-09 23:28:34:919|SyncServer|757|0x7fa891603f40|Server|Info| Goodnight, Gracie.
2015-01-10 15:42:25:744|SyncServer|1157|0x7f80a0e07490|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-10 15:44:26:194|SyncServer|1157|0x7f80a0e07490|Server|Info| Cancelling all sync plans.
2015-01-10 15:44:26:209|SyncServer|1157|0x7f80a0e07490|Server|Info| Goodnight, Gracie.
2015-01-15 23:03:10:076|SyncServer|2015|0x7f948b507600|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-15 23:05:10:406|SyncServer|2015|0x7f948b507600|Server|Info| Cancelling all sync plans.
2015-01-15 23:05:10:419|SyncServer|2015|0x7f948b507600|Server|Info| Goodnight, Gracie.
2015-01-18 09:38:30:633|SyncServer|8347|0x7ff9d2c0e650|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-18 09:42:26:784|SyncServer|8347|0x7ff9d2c0e650|Server|Info| Cancelling all sync plans.
2015-01-18 09:42:26:795|SyncServer|8347|0x7ff9d2c0e650|Server|Info| Goodnight, Gracie.
2015-01-21 01:43:30:322|SyncServer|3621|0x7faa7a507c30|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-21 01:46:11:127|SyncServer|3621|0x7faa7a507c30|Server|Info| Cancelling all sync plans.
2015-01-21 01:46:11:140|SyncServer|3621|0x7faa7a507c30|Server|Info| Goodnight, Gracie.
2015-01-28 22:53:33:756|SyncServer|18688|0x7f9270506d90|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-28 22:55:34:304|SyncServer|18688|0x7f9270506d90|Server|Info| Cancelling all sync plans.
2015-01-28 22:55:34:318|SyncServer|18688|0x7f9270506d90|Server|Info| Goodnight, Gracie.
2015-01-29 00:29:33:265|SyncServer|18828|0x7fefaa411b60|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-01-29 00:50:28:003|SyncServer|18828|0x7fefaa411b60|SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
2015-01-29 00:52:28:018|SyncServer|18828|0x7fefaa411b60|Server|Info| Cancelling all sync plans.
2015-01-29 00:52:28:054|SyncServer|18828|0x7fefaa411b60|Server|Info| Goodnight, Gracie.
2015-02-01 00:47:00:095|SyncServer|7426|0x7ff4bae07710|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-02-01 00:49:00:646|SyncServer|7426|0x7ff4bae07710|Server|Info| Cancelling all sync plans.
2015-02-01 00:49:00:659|SyncServer|7426|0x7ff4bae07710|Server|Info| Goodnight, Gracie.
2015-02-09 09:31:46:171|SyncServer|17932|0x7fb18860f330|Logging|Info| Logging initialized, engine version 722 : log level 3
2015-02-09 09:36:04:226|SyncServer|17932|0x7fb18860f330|Server|Info| Cancelling all sync plans.
2015-02-09 09:36:04:240|SyncServer|17932|0x7fb18860f330|Server|Info| Goodnight, Gracie.
2015-02-09 09:44:06:816|SyncServer|17954|0x7fc92160f

Ok, I don't know what those drivers are for?????? I don't have a clue Here is what it looks like when I do the option thing. Hopefully its ok to post that. I went into system preference and went to network and DNS server as a ip number and search domains as attlocal.net not sure thats correct, but that is what my phone had. Anyway it started working good for a while now it is just going slow again. I don't have anything set up for the tab 802.1X and my proxies is blank in the protocol to configure (nothing checked( and I a have this *.local, 169.254/16 in the bypass proxy setting plus the use passive FTP box is checked. Maybe that will help some. I will look at the extensions and get rid of them, I thought I had already done that though. Ok, thanks for the input let me know if any of this helps or what I should do. Thanks again.

Hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem

hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
Rosone

It is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

IWeb 08 - my site works on my laptop, but is MEGA slow on a Windows machine

My iWeb constructed site - published to a folder, then uploaded to my domain using Transmit (which is fully functional!) works on my laptop(s) but is MEGA slow on a Windows machine....and considering there's a lot of 'sheep' using Windows out there...AND the website involved is a business (a shop) www.ukdk.dk then I'm losing some business.
What could be the problem?
It works on BOTH my 2 Mac laptops (a G5 & a G4) , I've checked with the web-host/provider and all is fine there. When I used my old G4 to construct a website there was no problem of this manner. It's since iWeb 08 has been used.
I've got the latest updates, have slimmed down the website to 'try' and make it faster (which takes away it's groovey look, which detracts the charm of the site so that's a bloomin' nuisance) and have done everything within my power/knowledge to sort this. To no avail.
HELP!

The business is a shop. A small one. Even before (note: BEFORE) I let anyone at all know about the site's existence I checked it out on both a Mac - my own 2 - and a dreaded Windows machine. Worked fine with Mac, but not with Windows. This isnt with any traffic other than MYSELF visiting the site! I'd love to hear of other iWeb '08 users and their sites so I can check them out to see if they have the same problem. It's strange that I didn't get this when using my iBook G4's iWeb software.
Maybe I'll try transfering the domain file from laptop (New MacBook with iWeb '08) to laptop (Old iBook G4 with older version of iWeb) and seeing if that helps. A thorough pain in the backside if so, but at least the site will be working!
"Technical support!!!" Lol.
Just as an aside....what are the settings I should use at my host/web-hotel for optimum performance? I have them set already, but I want to double & triple check 'em. Better safe than sorry etc.
Thanks in advance!!! :))

How do I "mask" or blurr out sections of movie clips saved in windows media format in After Effects

I was informed that I needed to use After Effects to "mask" or blurr out sections of movie clips saved in windows media format.
I have the movie clip in composition, I see the effects and presets drop box on the lower right.
How do I insert the text blocks to mask certain areas of the movie clip?
Thank you,
Preston

Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest
There's seriously nothing more to say. Watch some tutorials, read the help, learn the program.
Mylenium

Illustrator cs3 very slow saving

I use illustrator cs3 and for some reason it has become ridiculously slow to save files. If I export to some other file illustrator is very fast, but saving takes 1 or 2 minutes. I have turned off version cue and pdf clipboard settings, but didn't help. I'm working on XP machine.

It appears that many have viewed this question, but know one has a solution. I do have an update. I uninstalled CS3 completely from my "C" drive and defragmented all drives on my computer. I then reinstalled CS3 on my "D" drive. With a fresh start I then loaded both updates to illust cs3 which is now version 13.0.2. Extremely slow saving problem remains, however exporting to a .png works like a charm. Seems alot of people coming here for answer, but no luck. If I stumble on anything I'll return.

I want to copy the text from the SAVED PASSWORD window so i can make a txt doc for back up.... how do i do it?

is there a certain file in the '''mozilla firefox directory''' that has the saved passwords ,etc info in TXT form, somewhere on my compputer that i havent discoverd yet?

@dmcritchie
I don't see any "sort" done at all on the resulting output. And the code on my page doesn't have any sort functions included, that I can see. ''(I know little about writing Javascript.)'' It sure doesn't "sort" as displayed in the Firefox Saved Passwords window, which is alpha from left to right - chrome:// - ftp:// - http:// - https:// - as the primary sort. And within each of those protocols there are mutli-levels of alpha sort, which are separated by each period in the URL, it seems.
The resulting output from my page seems like it may be in the order the passwords were originally saved, which is the order that data would have been originally saved in the signons.sqlite file. I can't say that 100% though, as the Profile I used earlier to test that it still works in Firefox 5.0 has been through hell and back over the last 8 or 9 years. I honestly can't remember the last time I started saving passwords from scratch in a new Profile, I have passwords from websites that I haven't been to in the last 8 years in there. I just copy the two password files into any new Profile I may create and I'm then sure I have any of the passwords I have saved since I started using Firefox.
Sorry, I don't have any idea about how to add another column with (xerox.com) pulled out of this URL (www.office.xerox.com), if I am following you. The script used basically takes the data saved in Firefox an outputs it direct, without modification, just placing that data into the correct place as per the script. I'm not sure that would even be possible, we're already hitting two security alerts in Firefox as it is.

How to disable the checkout button in saved carts window in istore

Hi all,
There is a requirement to disable the check out button in the saved carts window in istore.
When a user is saving a shopping cart in istore and revisiting back to the cart after some days. he should not be able to checkout but he has to click on update and go through the checkout.
If i could disable the checkout button then i could make all the users to click on the update button to proceed to checkout
Any ideas please............
Regards,
Prasad
Message was edited by:
Prasad rajan

Cross posted: [http://www.coderanch.com/t/487888/Swing-AWT-SWT-JFace/java/disable-cancel-button-input-dialog]

Windows 7 + Office 2007 & 2010 VERY slow saving files to on 2008 R2 files shares

OK I have litterally tried everthing in every forum there is to resolve this. It is only happening on our Win 7 workstations that are running Office 2007 or 2010. Our file shares are on a 2008 R2 server. Opening and saving files on the shares using
Office is very slow. I have tried updates and server and workstations are 100% up to date. The server is only running as a file share server. Nothing else on it. We have completely set up new PC's to test with clean Win 7 installs and nothing else except Office.
Nothing else on the network is slow at all. I have tried all the hotfixes in the world that could relate to this from many hours of research into possible causes. I have done the EnableShellDataCaching fix, the SMB 2 disable fix, the windows search/indexer
fix, the pdfmaker fix, the lookup wizard add-in fix, the go to the newest firmware on the cisco switch fix, update workstation nic driver fix, the Trusted Locations in Excel fix, and about a dozen other fixes. NOTHING WORKS! This has brought our Win 7
and Office 2007/2010 users to a halt in their ability to do their jobs. Our company is suffering badly. And did I mention that our IT dept is getting a lot of heat and criticism about it. FYI we are running an IBM E5450 with dual multi-thread
multi-core(8) 3 Mhz Intel Xeon processors with 2008 R2 64-bit, 12 GB ram, and the server is using litterally no resources. Network connected is Gigabit. This has to be a Microsoft issue with 2008/Win 7/Office 2007&2010. This has become a nightmare for
out IT dept and has consumed weeks of our time when we need to be working on other projects. Can anyone solve this. Microsoft: Please release a REAL fix for this that we can run on the server or push via GPO to the workstations.

Hi,
Take a look at this and see if it helps:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
also
Office 2010 components, such as Word 2010?
At this time, I suggest trying to start Excel in safe mode. Then, open the Excel file or create a new Excel file, and save the file to the network again.
Start the Excel program in safe mode
1.       Click Start, point to All Programs, and then point to Microsoft Office.
2.        Press and hold the CTRL key, and then click the Microsoft Excel.
If the problem does not occur in the safe mode, this issue might be related to some third-party add-ins in the Excel program, we can try to disable them. Normally, you could do the following to disable the conflict add-ins in your Excel program:
Disable add-ins
Click File menu, click Options > Add-in, click Go button in the Manage: Com-in Add.
Check if there are any add-ins, clear the checkbox to disable them.
Close the Office program and restart it.
Add one check back each time to the list of Add-In, restart the Office program, and repeat the above procedure. Once the issue reappears again, we can determine which add-in causes this problem and then disable it.
Please take your time to try the suggestions and let me know the results at your earliest convenience. If anything is unclear or if there is anything I can do for you, please feel free to let me know.
====
Is the performance also slow when you trying to save the Excel file to other network path?
At this time, we can also try to test this issue in the clean boot mode.
Test in Clean boot Mode
===============
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.        Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3.       Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This should not affect the system or other programs. We may still manually run these programs later.
What’s the result now?
How to return from the Clean Boot state
After the troubleshooting, we can return from the clean boot state:
1.       Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2.       On the "General" tab, click "Normal Startup - load all device drivers and services".
3.       Click OK. Click Restart when you are prompted to restart your computer.
If this answer solves your problem, please check Mark as Answered. If this answer helps, please click the Vote as Helpful button. Cheers, Shane Devenshire

Slow saving files in Windows 7

I have a new Windows 7 (Home Premium edition) 8 GB RAM. I have just recently installed CS4 Design Premium and I am experiencing extremely long delays when saving files to a USB external hard drive. I used the external hard drive on a Windows XP machine with 3.5 GB RAM and there were no delays saving files. Is this a known issue or is there a work around?
Thanks!

\I am not sure if your Nvidia Geforce card has anything to do with this but are you still experiencing this error or is this just a one time issue?
Where are you saving?WAV file?to Can?you check the available?memory?of?the storage location?
A 3 min WAV file?can easily?take up?30mb?or more?storage space.

CS4 apps are VERY slow to open Windows file browser with File Open or File Save As commands

We are running CS4 on Windows 7 with all available updates installed. Photoshop and the other CS4 applications are VERY slow to open a Windows file browsing window to select files when File Open or File Save As menu options are run -- it can take as long as a minute or two for the window to open. Once the window opens and a file is selected, then opening or saving the file is very quick. The location of the default directory, whether it is on a local drive or a network drive, makes no difference. Any suggestions as to what the problem might be?

Raphman02
The link that I posted earlier is off. Read this one
http://support.microsoft.com/kb/2501584. I discovered in my network that the MS Office File Validation Patch made excel crawl when opening over the network though nothing else changed. At the time I was opening Excel on Office 2003.
You can manually turn this off by editing the registry and tunring it off. Going forward I skipped the patch to keep my sanity. Not sure if this is the same as your issue, but the support article will go into detail how to either have Fix it
clear the issue or change the proper registry keys.
Hope this helps

Slow Saving Times in After Effects CC

Hi all,
I'm experiencing some really slow project saving times in After Effects CC. I'm used to having projects save in under two seconds in AE CS4, but AE CC is taking up to ten minutes to save a project of comparable size and complexity!
After reading a few threads about this potentially being caused by big project files and/or Warp Stabilizer, I thought I would just have to live with the long save times. But, I have since started another project that isn't using Warpy, and the saving time is no better - possibly even worse.
Any help would be greatly appreciated.
My computer specs:
Windows 7 64bit
Intel Core2Duo @ 2.5GHz
4GB RAM (AE uses 2.5-3GBs)
GeForce 8600M GS
Project specs (with Warpy): 4-6 main comps and around 25-30 precomps, 1080p, Warpy is used on maybe 5 short layers. Project file is 21 MBs.
Project specs (without Warpy): Around 10-15 main comps, and 5-10 precomps. Various comp definitions, ranging from 500x500 to 5100x3300. Project file is 3MBs.
Thanks!

Look at post #7 in the thread I previously linked to. Here's a direct link to that post: http://forums.adobe.com/message/5508252#5508252
There's currently a bug in After Effects where a file on your software drive is being checked any time you access a menu, use a keyboard shortcut, etc.
With your system drive (which I assume is what AE is installed on) being a slow, 5400 RPM laptop drive, I'd say this is the culprit. As Todd mentions, there could be a fix released. In September. If you're lucky. [Fail.]
You'll have to either run AE from a faster drive (probably not an option if you're on a laptop), wait until September, or go back to CS4.
I've not encountered the problem myself, but my system drive is super-fast: a SATA-3 SSD with 500+ MB read and writes.

Slow saving and switching Illustrator Photoshop

We have bought 6 licenses of Adobe Creative Suite. Our machines generally have this spec
     Quad Core / Dual Core
     2 GB memory
     Windows XP SP3
     Video Card 512 MB/ 256MB
     Part of a Windows Based Network
Most of the computers are new and aside from Adobe Creative suite we have installed mcaffee enterprise edition anti-virus
program, skype, open office, firefox.spyware terminator.
Some time after 6 months of use...our artists experience slow down in saving files....(1 MB file takes more 5 minutes)
and even switching between photoshop and illustrator. When they are connected to the LAN this happens. But if they
disable the network connection or physically remove the UTP cable from NIC both software works just fine.
We have tried searching for solutions in the net but we have not found anything that solved this issue.

Hi Mylenium,
Im not too familiar with network routing and configuration. Can you please give a suggestion on the best
Configuration for the routing in our network? What exactly do need to do to flush all temp files made or tracked
In our network.
Thanks in advance.
Ira

Slow authentication on Windows

I've set up small office network - 6 Windows computers + one Mac with OS X Server 10.4.4. Everything works OK (file services, open directory....) but I have one problem - when Windows users try to authenticate on domain (OS X server runs as PDC), this process is slow - about 20 seconds until logon process starts. Where the problem could be?

There used to be a TCP delayed acknowledge problem OSX<->Windows.
The newer Tiger net.inet.tcp.delayed_ack: 3 default(?) might be worth trying changing.
You could try in Terminal:
sudo sysctl -w net.inet.tcp.delayed_ack=2 (used on Windows?)
or
sudo sysctl -w net.inet.tcp.delayed_ack=0
Which will alter this setting immediately.
Change it back to "3" if it doesn't help.
Also, workgroup/domainame is entered with UPPERCASE letters?

Slow saving on windows

Similar Messages

Maybe you are looking for