Slow shut down and repeating error message on Console

MacBook shutdown is very slow.  This error message is repeated many times: 
com.apple.Dock.agent[99]          Sat Apr 23 21:50:12 JEBMacbk.local Dock[99] <Error>: kCGErrorIllegalArgument: CGSSetWindowTransformAtPlacement: Singular matrix [nan 0.000 0.000 nan]
Can anyone tell me a what to change to eliminate that error?  (JEBMacbk is the name of my computer.)
Thanks

Pl indicate which version of Win 7 - you will need Professional or higher - Home version is not supported for installs - http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABIICFE
Pl confirm you meet all of the pre-reqs listed in the link.
Pl post the last 100 lines from the install log - http://docs.oracle.com/cd/E11882_01/install.112/e24186/ts.htm#i1090466
HTH
Srini

Similar Messages

  • Why does most of CS6 shut down with an error message?

    I bought CS6 last week and loaded it on to my computer. When I went to use it yesterday the majority of the programs didnt work. Photoshop is opening but illustrator and indesign dont. When I open indesign it opens, gets to the bit where you choose to open a previous document or start a new one then just shuts down and an error message pops up saying indesign had to close suddenly. Im in so deep over my head with all of this. Also im on a mac computer. if that helps. Does anyone have anything that can help me?

    You need to be much more specific. What Mac? What version of OSX? Where are your files stored? This could be anything from permissions issues to severe configuration issues somewhere....
    Mylenium

  • Great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my

    great Problemes after installing Yosemite (10.10.2 ) with Photoshop CS6....The program crashes --last time 10 times during my work session..wacomtable doesnt work..it is slow...and get error messages about the graphic card....It s a Terror to work with my beloved Photoshop!

    The Yosemite upgrade very often damages existing Photoshop installations.  Thank Apple for that.
    You need to uninstall and re-install Photoshop, then apply all the Photoshop upgrades from scratch.
    But first, give us details about your setup:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Firefox shuts down suddenly without error message. Any ideas why?

    Firefox shuts down suddenly without error message on Samsung Note 2014.

    Please update to the most recent version of Firefox:
    *[[Update Firefox to the latest version]]

  • My emac safari launches with no search screen and when i open a new tab it shuts down wit an error message???

    Hi, and thanks in advance. I have an emac thats working fine except for safari. Click safari the top bar comes up but no page and when i open a new tab it shuts down with a error and message saying it unexpectedly quit and send to apple or relaunch.

    safari that i am running is 4.3.1

  • Problems shutting down and getting 'Error -39 when trying to open my files

    After working all evening using my Macbook Pro, I close out all my programs and shut down the computer.
    However, the computer refuses to shut down. The screen freezes and just sits there. After about 10 minutes of waiting I eventually hold down the power button to shut the computer off.
    When I restart the MacBook Pro and try to open the file I was working on, I get the following error. 'While attempting to access [FILE], the file manager reported an error -39.'
    Why does this keep happening?
    MacBook Pro 2.4 GHz Intel Core 2 Duo
    4 GB Ram MHz DDR3
    Mac OS X 10.5.8
    Finale 2010
    Logic Studio 9
    Yamaha PSR-310 via Midi Interface
    null

    I don't think you're having an Apple hard disk issue, because your other applications are working without problems.
    I believe you are getting the corrupted file(s) (End of file, Error -39) because you are powering off the computer before the application and the computer have completely shut down.
    I can't tell you why it is happening, but I suspect that the Finale application is being extremely slow to shut down, and it is leaving the '.mus' file open until it quits.
    *Kostby, thanks so much for your reply. I actually work for a software company, so I asked a few people around here and they agree with you. For some reason, the application is taking a very, very long time to quit, and it's causing the computer to keep running instead of shutting down.*
    Perhaps some file was corrupted in the old version of the Finale application was carried over with the upgrade? Have you tried reinstalling the application?
    *I haven't, but this is a good idea. I will completely remove the program and start over.*
    Hardware...
    I notice that the keyboard dates from 2006/2007.
    *Actually, it's from 1993 (time flies...)*
    Is the midi interface Firewire or USB?
    USB
    Does the midi interface ever cause an error or a 'hang' with or without the keyboard?
    *Not that I'm aware of. I haven't used it in awhile, and it's not been connected to the computer in weeks.*
    Are there software drivers needed to make the Midi interface work with the Mac.
    *No, I simply plugged it in and it worked. No extra software or drivers needed.*
    Are the drivers old? (e.g. 10.4.x or 10.5.3)
    N/A
    Have you tried saving the file to a USB flash drive, rather than a physical hard disk?
    *I haven't, but I'll need to save a few tonight if I do a reinstall of Finale.*
    Powering off vs suspending vs leaving it run...
    Do you get the 'spinning beachball' (spindump) when Finale apparently hangs?
    *No spinning beachball. The desktop simply freezes...*
    What happens if you leave it on for an hour or overnight after the apparent 'hang'?
    *Never done that. Longest I've left it alone during the 'hang' has been about 15 minutes.*
    Does the screen ever come back and let you use the computer again?
    *After 15 minutes I would hit the power button and force it to shut off. I've never allowed it to go on for this long. I just thought if it didn't come back after 15 minutes it wasn't ever coming back.*
    Does the file corruption occur when you suspend the application by closing the lid, rather than shutting it off?
    *I've never just closed the lid on my Macbook Pro. I've always either set it to sleep or shut down and waited for it to do so before closing the lid.*
    Thanks again for the great suggestions. I will try them all this evening when I get home from work.
    Best,
    Dana

  • When I go to capture, FCE shuts down with no error message

    I upgraded to FCE on both my Macs. One Mac powerbook G4 works fine in capture and writing to video. The other powerbook will shut the program down unexpectedly without error message. I use the same camera for both computers. Can someone help me figure this out.
    Thanks!

    Try these:-
    1. Trash the preferences like this - http://www.fcpbook.com/Misc1.html
    2. If that doesn't work, COMPLETELY UNINSTALL FCE like this and try reinstalling again -
    http://docs.info.apple.com/article.html?artnum=301182
    You can ignore the LiveType and Soundtrack items.
    Ian.

  • Imac shuts down without any error message

    imac shuts down without any error message

    Need more details. Which iMac? Which OS? When does it shut down, under what circumstances? What are you doing when it happens? Is it reproducible, i.e. can you make it happen? Does it appear to be getting very hot before it shuts down?
    Open Console in Applications>Utilities and navigate to system.log. Do you see any messages related to shutdown from the time when this has happened? Enter "shutdown" in the filter field, upper right corner.

  • A book I created in iphoto keeps making the program shut down with an error message...

    I created a photo book on my iphoto but have not purchased yet. Now when I open iPhoto and click on the book under 'keepsakes' the program shuts down and says iphoto quit unexpectedly. I have been unable to open the book since I created it. The other book that I have made before opens but for some reason, the program will immediately shut down after I click on it.

    It could be that the database entries for that particular book are corrupted.  Apply the fix below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    iPhoto 8 (09) and earlier- run the options indicated
    iPhoto 9 (11) and later- run  Option #4 to rebuild the database
    OT

  • ICM7.5 - System is shutting down with a error message

    Hi,
    I have installed a ICM7.5 SPRAWLER in our Lab.All was working fine until yesterday, when I suddenly started receiving the below error
    This system is shutting down. Please save all work in progress and log off.
    Any unsaved changes will be lost.
    This shutdown was initiated by LOGGERA-9a48f5 services..
    Cisco systems. Inc, ICM Node Manager Manager shuting down system. To Cancel shutdown, run the stopshut utility
    and the system shutsdown. I have not done any changes to the system.
    Do you have any ideas what kind of an error is this and how to resolve this?
    Please advise.
    Thanks,
    Srinivas

    You need to check the log files - the .ems files - in the logger directory (maybe la\logfiles). You must use dumplog to examine these.
    First look at the nm (Node Manager) log file to see why it is having trouble and which of the processes has errors and cannot be restarted. Then check the offending process. Maybe increase the trace to see your problem.
    Maybe the configlogger cannot talk to SQL or something. I think you will see what the problem is quite easily. Maybe you will know how to fix it, but if not, come back here with some trace and ask again.
    Regards,
    Geoff

  • Satellite P505 S8950 laptop shutting down with bluescreen error message

    Hi ,
    I bought Toshiba Satellite P505-S8950 model 4 months ago.
    I notice my laptop shuts down intermitently while straming videos especiaaly in 'full screen' mode and while using skype with video chat.
    My laptop is still under warranty and I have not created any back up since I bought.Now,
    Because system is unstable so doing back up now may not be useful.
    After every restart I have meesage 'computer has recovered from unexpected shutdown' and upon allowing Windows to find solution nothing comes up.
    copy +paste of one of error log-
    ***Problem signature:***
    ***Problem Event Name: BlueScreen***
    ***OS Version: 6.1.7600.2.0.0.768.3***
    ***Locale ID: 3081***
    ***Additional information about the problem:***
    ***BCCode: 109***
    ***BCP1: A3A039D8965D960F***
    ***BCP2: B3B7465EE8DA6805***
    ***BCP3: FFFFF80002C9595C***
    ***BCP4: 0000000000000001***
    ***OS Version: 6_1_7600***
    ***Service Pack: 0_0** *Product: 768_1**
    I am running windows 7 home edition premium with 64 bit and RAM test after every restart is good so far.
    Please can anybody help to the system stable and help my experience while browsing more enjoyable?
    Thanks.

    I have European Satellite P500 almost 2 months now and use it with original preinstalled Win7 home premium 64bit. I use it daily for work and some multimedia activities. I also use Skype almost daily.
    Until now I didnt notice any similar problem.
    It is not easy to discuss about such problems because none of us know how you have configured preinstalled OS, which applications do you use and if there is some software conflict that can be responsible for this.
    Have you installed something that can be responsible for this behaviour?
    To be honest I cannot imagine you have had this problem from the first day. Maybe you should install recovery image again using HDD recovery option.
    I dont know what kind of back-up do you mean but what you can do is to start recovery DVD creation.

  • Finder gives error message mac wont shut down, finder gives error message mac wont shut down

    When I try to open finder it says it can't open and gives a number 10810. I have a gray box at the right top of my computer. It leave it opened one day when I loaded pictures. The computer also will not shut down. I have done all basic things. I can manully shut down but it comes up same way and won't reboot!!
    Help getting ready to throw in trash!!

    When I try to open finder it says it can't open and gives a number 10810. I have a gray box at the right top of my computer. It leave it opened one day when I loaded pictures. The computer also will not shut down. I have done all basic things. I can manully shut down but it comes up same way and won't reboot!!
    Help getting ready to throw in trash!!

  • TS4036 iPad2 keep shutting down restored now error message 21

    To restore took a little over an hour.When complete error message 21 appeared. HELP!

    Hi z,
    I see in the report that you have a newer MBP, so I've asked the hosts to move this thread to the MBP 2008/Later forum. Good luck to you.

  • Repeating error message in console

    I keep getting this error message in my console. I have an error for every minute of the day my mac is on and it's this same one. Wondering now if this is what could have bee causing my mac to run slowly recently.
    FolderManager: Failed looking up user domain root; url='file://localhost/dev/null/' path=/dev/null/ err=-36 uid=504 euid=504
    Any help would be appreciated

    mdworker is used to index files on the hard disk by Spotlight.
    http://developer.apple.com/mac/library/documentation/Darwin/Reference/ManPages/m an8/mdworker.8.html
    Searching for the keywords *FolderManager mac* in a search engine does turn up an application named [Folder Manager X|http://software.techrepublic.com.com/abstract.aspx?docid=442085]. Perhaps you are on the right track then. Just find and delete this programme which is apparently used to run some folder actions. Perhaps spotlight will be able to find it. If not, then we can try something else.
    Cheers.

  • I recently bought the first generation ipod touch, but it doesn't work. I've tried restarting over and over, i've tried switching cables too. The apple logo stays on the screen and freezes, it then shuts down and repeats. My laptop doesnt recognize it.

    Please help
    I bought it through a mutual friend.

    - Connect the iPod to your computer and try to make a backup
    iOS: How to back up and restore your content
    - Next reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    and try making a backup again. If you can't then there is no way of getting the info off the iPod unless data recovery company can do it. Not cheap.
    - If photos are in an existing iPod backup (iTune>Preferences>Devices  for iTunes backup or an iCloud backu) then restore from that backup. See the restore topic of:
    iOS: How to back up
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer

Maybe you are looking for

  • Trying to update iphone 3GS. I use it only for apps and music. It will not allow me to update through itunes? What do I do?

    I have a iphone I do not use as a phone anymore. I use the apps and the music on it though. I downloaded itunes and I am trying to update the phone so I can purchase music and apps for it. When I plug it to the computer it starts syncing and runs a g

  • How do I use the Kuler API?

    For more information on the Kuler APIs and guidelines for usage and application naming, see the Kuler Update (5/30/13): We're working to rebuild the Kuler API to offer more robust capababilities.  Until then, we're no longer issuing new API keys.  If

  • Using unix  remsh in BR*tools Studio

    Hi I have installed BR*tools Studio on Unix for Multi-instance server mode purpose. The probelm is how to connect the Oracle instances to this server . For that I need the corret parameter line needed when creatine an instance in the  BR*tools Studio

  • Problems with pictures in Muse

    We have at any given time 2-3 pictures on our website that the bottom half is cutting off.  We use Go Daddy for our hosting.  The bottom half of the space allocated for the picture is gray or white.  We have deleted the images several times, replaced

  • Click on any Hard Drive - Icon Starts Flashing/Blinking - No Question Mark

    After starting my MAC, any hard drive I click on (internal/external) - it starts blinking/flashing continously and cannot access the drive. Cannot access Disk Utilities, etc. Any help would be greatly appreciated!!!