Slow, slow, poor quality streaming from netflix, utube, imdb, etc

My wi-fi appears to be working correctly with full signal strength and fast web browsing, but as soon as I try to stream any tv shows, movies or trailers, there is a considerable lag and the quality of the picture is not great. Are my expectations just too high? I've been steaming HD content thru my xbox 360 with perfect results and I have the fastest download speed available thru my ATT service at home. Anyone else have this problem or a solution?

Let me add a few more details. I had trouble streaming in youtube app and in safari. I had trouble with streaming apple's own videos and from cnn and anything else I could think of. At the same time, other computers on the same network had no problem streaming the same videos.
I also had trouble downloading high-res photos that required sustained transfers on the same network. The photo would start downloading fast then slow to a crawl and sometimes never complete. So it seems like a wifi issue and not just a video streaming issue.

Similar Messages

  • Poor quality convertion from adobe reader to word

    Good day,
    I received a poor quality convertion from adobe reader to word.
    Can I send the original to anybody for help or a better convertion.
    Enjoy your day
    Regards
    Johan de Beer

    Without context, my guess is that your question should go in the ExportPDF forum,
    http://forums.adobe.com/community/exportpdf

  • Poor quality printing from reader

    I am getting poor quality printing from adobe reader.
    I tried 3 different PC with the same printer (windows 7 - Epson xp 600)
    DOC XLS JPG and all other files are excellent on the printer.
    I tried almost all the configurations on the properties of the printer and adobe
    I don't know what else to do to get my printing correctly.
    Please HELP MEEEEEEEE
    Thanks a lot for your time.

    What is your Reader version?
    What exactly means "poor quality"?
    Have you tried Print as Image?

  • I use my Apple TV mostly to stream from Netflix, and up until recently it worked perfectly.  Now the film freezes ever minute or so and it takes another minute to start up again.  This doesn't happen when I stream directly onto my laptop.

    I have had an Apple TV for over a year.  I use it mainly to stream programs from Netflix, and up until a few months ago, I had no poroblems.  Now it has become impossbile to watch a Netflix program on my TV because the film freezes every couple of minutes, or less, and seems to be downloading.  It starts again, but the same thing happens in a couple of mnutes more.  I have tried pausing the film for a few minutes to let it download, and I have even started a film, and then paused it, half an hour before starting to watch it, hoping that this would allow the entire film, or most of it, to download, but it hasn't helped.  I don't have this problem when I download directly from Netflix onto my laptop, but then I don't need Apple TV.  Of course, I'd rather watch films on my TV than on my laptop.  Any suggestions other than buying a new Apple TV after just over a year?

    I also found the following post about a TV interfering with wireless networking:
    https://discussions.apple.com/message/17354146#17354146
    When I was searching I also found similar problems with screen brightness affecting wireless networking in iPads and MacBooks. So it seems like screen backlighting can generate wireless interference. The joy of technology.

  • Poor quality streaming videos

    I've noticed that my imac can't handle or should I say doesn't have the same quality streaming playback as my PC. I thought mac's were meant to handle media, graphics, video's & such. I'm presently running with what came with my OS which is Quicktime 7 & I downloaded the newest version of media player but the picture quality on both are very poor with visible pixels & frequent stalling & pausing. Can anyone suggest a program out there or maybe I've got something setup wrong.

    Quicktime 7 & I downloaded the newest version of media player but the picture quality on both are very poor with visible pixels & frequent stalling & pausing.
    Poor quality video is usually the result of low resolution media files being streamed to you, If you play any of the movie trailers on the Quicktime site, for example, you can see the high quality of streaming video that is possible in Quicktime.
    I cannot recall visiting any sites recently that have high quality feeds for Windows Media Player. Many of the WMP feeds I have seen look fine if you keep the player window on the small side, but rapidly disintigrate as you enlarge the window. I have to admit I have not looked for sites with WMP content, so what I have seen is just that which I have come across.

  • Poor quality exporting from iMovie to iDVD

    When I export a dv movie from iMovie to iDVD, the quality drops significantly. A nice clean movie imported from a dv camcorder to iMovie becomes horrible pixelated mess once exported into iDVD and actually burned into a DVD. No matter what quality settings one uses.
    It seems like many people experience similar problems, judging by postings (unanswered, as far as I can tell). It also appears that basically everyone using iMovie has this problem, but most people are content with poor quality DVDs, or are they?
    Does anyone know why this is so, and if there is any workaround? You know, the simplest way out is to switch to a PC and use one of their standard movie editing software, but isn't Mac supposed to be better for this purpose?

    Hi
    A.
    If You included photos into Your movie and used Share/Export to iDVD. iMovie
    asks to render the material = Destructive in two ways:
    • Losy iDVD project
    • Original iMovie IS HARMED: Photos needs to be re-imported and re-edited.
    • Re do the import and editing.
    • Close iMovier
    • Open iDVD
    • Drop iMovie project icon (with a Star on it) into iDVD
    Done.
    B.
    There are a major difference between a Mac Monitor and a Standard TV (much less
    sharpness due to 525 - 625 lines (NTSC or PAL))
    I connect my Camera to my Mac (via FW) and analog out to a TV so that I can monitor
    the process during iMovie editings. (iMovie preferences set Playback via Camera)
    Yours Bengt W
    Yours

  • Poor Quality Import from Panasonic PV-GS320

    I am importing video from a Panasonic PV-GS320 to Final Cut Express 4.0.1 and I always get poor quality video.  The edges of all of the images become jagged when the images move no matter what "easy setup" settings I use.  I have attached a still that shows it.
    I appreciate any ideas.
    Thanks,
    Andrew

    Well, as Alchroma pointed out earlier, you are editing interlaced source material (correctly) on an interlaced timeline (which is correct), with the correct field dominance.
    The problem is that interlaced video simply does not display correctly on computer monitors. Final Cut will supress some of the artifacts that display when you choose any viewer or canvas scale other than 100%. When you set the scale to 100%, the display clearly shows the interlacing.
    What is the final use of your video? If it is for DVD, you are doing it correctly, and a DVD made from the source and sequence settings you have should display properly on a TV monitor (not a computer monitor).
    If you are viewing the clips via Quicktime, depending on which version of Quicktime you are using, open the Quicktime preferences and make sure "use high quality video settings when avaialable" is checked.
    If you are posting your videos on the web, when you convert them to H.264 you can deinterlace the video so that it will look correct when your videos get viewed.
    MtD

  • Atv2 streams from Netflix @ 1/10th of speed of the other devices

    ps3, ipad2, & desktop pc all pull around 9Mb/s [12Mb/s service] via cat5 AND/OR .n from AEBS.
    The ATV2 pulls from .75-1.2Mb/s from Netflix, according to their tech support.
    swapped out cat cables, rearranged which cable goes into which lan port on router, still the same thing.  Called Uverse, they ran line tests, came out to house, nothing wrong (obviously if others are connecting ok).
    Apple has offered to swap out the Atv2, just wondering if anyone has had this issue and solution.  Netflix states that its not on their end.  Other than this Atv2 works fine.
    Will wait a week to update to new 4.3 F/W out today 1AUG2011.
    All other devices current with F/W, and nothing is jailbroken etc...........
    Any comments appreciated.

    Hi Welcome to the community forums
    Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
    once you have posted the information asked for then the community members can help you more
    if using a hub 4 locate these lines located in the hub logs
    Lines should look like this
    19:11:29, 07 Nov. (2290101.460000) DSL noise margin: 7.00 dB upstream, 6.10 dB downstream
    19:11:29, 07 Nov. (2290101.390000) DSL line rate: 448 Kbps upstream, 288 Kbps downstream
    Thank You
    This is a customer to customer self help forum the only BT presence here are the forum moderators
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • Streaming from your iPad, iphone etc

    Hey guys,
    I recently got Apple TV for Christmas and thus far I have been pretty happy with it. My only issue is streaming directly from my iPad. I can use Airplay remote to use my iPad as a remote. This is pretty cool but according to the apple website I can directly stream from the iPad by tapping the airPlay icon all the way to right of the ipad's video menu bar which gives you the option of using the iPad or Apple TV. Once I hit Apple TV I can hear the sound but I only get an icon for the video not the actual video play back from the iPad; the iPad has the paused video from where ever I tapped airplay. Any suggestions? I checked the website and am doing all the stuff they say to, but I don't get the screen that says that the video is playing on Apple TV on my ipad.

    Video playback is currently only supported through youtube, itunes or recorded through the IOS device (eg. iphones). The next software update will provide support for 3rd party apps. I have begun converting some my collection of dvds to itunes formats to be able to do this. A very good converter I found specifically for this with specialised Apple tv2 presets is called Handbrake.

  • Mac Pro won't stream from Netflix

    Mac Pro 2 x 3 GHz Dual-Core Intel Xeon, 9 Gb RAM, OS X 10.6.7. Used to be able to stream Netflix Instant Watch movies up to about a year ago, when I got an iPad and switched to watching Netflix stuff on that. But yesterday I tried it on the Mac Pro again and a message informed me "Our apologies -- instant watching is not supported on your operating system." I use Safari 5.0.5 and meet all the other Netflix requirements for streaming on a Mac.
    On a separate internal hard drive of my Mac Pro, I have OS x 10.5.8 and Safari 5.0.5, and am still able to stream Netflix movies fine if I boot up in that. But I can't steam them when booted into 10.6.7 for some reason. Any ideas?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Very poor video streaming from youtube

    I cannot watch a single video from youtube or any other site. I have OS v6.0.0.522. Is there anything i can do?? It will play a video for a few seconds then just starts to buffer. I have a BB 3G 9300 with Sprint

    Hello mikeswitzer. Welcome to the Apple Discussions!
    As you have already figured out poor signal strength equals poor bandwidth performance. This, of course, will be noticeable for both audio and video streaming.
    I suggest downloading a copy of iStumbler. Use iStumbler's Inspector feature (select Edit > Inspector from iStumbler's menu) to determine the Signal-to-Noise Ratio (SNR) at different points around your house, by performing a simple RF site survey. Within the Inspector, note the values for "signal" & "noise" at these locations. Start with your MacBook near the Time Capsule (TC), note the readings, and then, go to the location where you currently have the Mac Mini.
    SNR is the signal level (in dBm) minus the noise level (in dBm). For example, a signal level of -53dBm measured near an access point and typical noise level of -90dBm yields a SNR of 37dB, a healthy value for wireless LANs.
    The SNR, as measured from the MacBook, decreases as the range to the base station increases because of applicable free space loss. Also an increase in RF interference from microwave ovens and cordless phones, which increases the noise level, also decreases SNR.
    SNR Guideline
    o 40dB+ SNR = Excellent signal
    o 25dB to 40dB SNR = Very good signal
    o 15dB to 25dB SNR = Low signal
    o 10dB to 15dB SNR = Very low signal
    o 5dB to 10dB SNR = No signal
    If the SNR is 20dB+ at the Mac Mini, then you should be getting reasonable performance from your TC. If less, either try to locate the source of the Wi-Fi interference or try relocating either the TC or the Mac Mini until they are within a 20dB SNR range.
    Another option is to utilize a transceiver on the Mac Mini to try to increase the Mini's built-in AirPort antenna ability to pick up the signal from the TC. One vendor that provides these is QuickerTek.

  • Poor quality of from FCE to idvd

    Hello All,
    We have used iDVD to burn our fce projects. This week we burned a reunion filmed mainly in doors. On FCE the footage looked fine as well as after exporting to QuickTime. Once burned on iDVD and played on a HD tv, the picture is extremely grainy. We switched the tv to standard screen which helps a little, but overall the quality is poor. Even the type on the chapter titles looks blurry. I tried changing the encoding preferences (in iDVD) to professional quality, but couldn't see much difference.
    The original footage was filmed in hd and captured at 29.97 fps and hdv-apple intermediate codec 1080i60.
    Any advice would be great.
    Gobble Gobble,
    Jamie

    Jamie,
    Please provide a little more information.
    1) How long is your movie, that is what is the play time?
    2) How did you get the movie to iDVD? The best way is to export the movie from FCE as a Quicktime Movie (not Quicktime Conversion). The close FCE and then open iDVD and then go get your movie from with in iDVD.
    Also, I hope you realize you had HD material, but iDVD is Standard Definition. How good it looks depends a lot on how well your TV and your DVD player upscale.

  • Poor quality DVD from Premier Elements 1.0

    I've captured 5 short clips from my miniDV camcorder with premier elements. The avi files look like reasonably good quality. When I export to DVD, the 5 minutes of video, the quality is very poor, almost blurry or like it has way too much compression. I exported with the 'fit contents to media' unchecked and the quality setting to High, USA Japan, NTSC.
    I took the same clips and burned a DVD from Sonic MyDvd and the quality was much better.
    I have the latest premiere Elements 7 on order but I want to know if anyone else has had a similar problem. I seem to remember premiere making better DVDs when I first installed but can't find anything in the settings that has changes.
    Thanks,
    Mike

    When recording your video with miniDV, are you shooting in High Definition or Standard?
    What project preset are you setting for at the Premiere Elements Welcome Screen/Setup?

  • Macbook audio stuttering while streaming from Netflix, Hulu, etc...

    As of late my wife's 2008 Black Macbook 2.16ghz C2D has been acting up while streaming video. It first started with kernel panics, but Iocated the problem and relieved the Macbook of it. Now though after a hard drive erase to zero, a re-install of the OS, and an uprgade to the ram it has an audio stutter present when watching Netflix. I've checked practically everything on it. Even opened it up to check the hardware. Can anyone help? I ran this diagnostic from some help here in the forums.Can anyone see anything I'm missing? The help would surely be appreciated. Thanks!
    edu.mit.Kerberos.krb5kdc
    edu.mit.Kerberos.kadmind
    com.microsoft.office.licensing.helper
    com.adobe.fpsaud
    Ana-De-La-Garzas-MacBook:~ HelloGatita420$ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'
    edu.mit.Kerberos.KerberosAgent
    com.google.keystone.user.agent
    edu.mit.Kerberos.CCacheServer
    Ana-De-La-Garzas-MacBook:~ HelloGatita420$ ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
    /Library/Components:
    /Library/Extensions:
    /Library/Frameworks:
    iTunesLibrary.framework
    /Library/Input Methods:
    /Library/Internet Plug-Ins:
    EPPEX Plugin.plugin
    Easy-WebPrint EX.plugin
    Flash Player.plugin
    JavaPluginCocoa.bundle
    NP-PPC-Dir-Shockwave
    OnLiveGameClientDetector.plugin
    Quartz Composer.webplugin
    QuickTime Plugin.plugin
    SharePointBrowserPlugin.plugin
    SharePointWebKitPlugin.webplugin
    Silverlight.plugin
    flashplayer.xpt
    nsIQTScriptablePlugin.xpt
    /Library/Keyboard Layouts:
    /Library/LaunchAgents:
    /Library/LaunchDaemons:
    com.adobe.fpsaud.plist
    com.microsoft.office.licensing.helper.plist
    /Library/PreferencePanes:
    Flash Player.prefPane
    /Library/PrivilegedHelperTools:
    com.microsoft.office.licensing.helper
    /Library/QuickLook:
    iWork.qlgenerator
    /Library/QuickTime:
    /Library/Spotlight:
    AppleWorks.mdimporter
    Microsoft Office.mdimporter
    iWork.mdimporter
    /Library/StartupItems:
    /etc/mach_init.d:
    dashboardadvisoryd.plist
    /etc/mach_init_per_login_session.d:
    /etc/mach_init_per_user.d:
    Library/Address Book Plug-Ins:
    SkypeABDialer.bundle
    SkypeABSMS.bundle
    Library/Fonts:
    Doctor Soos Light 1.1.ttf
    Dr_Seuss 2.ttf
    Dr_Seuss.ttf
    Jokerman-Regular.ttf
    Library/Input Methods:
    .localized
    Library/Internet Plug-Ins:
    Library/Keyboard Layouts:
    Library/LaunchAgents:
    com.apple.CSConfigDotMacCert-cadlg28@me.com-SharedServices.Agent.plist
    com.google.keystone.agent.plist
    Library/PreferencePanes:
    Ana-De-La-Garzas-MacBook:~ HelloGatita420$ osascript -e 'tell application "System Events" to get name of every login item'
    iTunesHelper, Canon IJ Network Scanner Selector2
    Ana-De-La-Garzas-MacBook:~ HelloGatita420$

    You may have tried these suggestions before, but since I do not know the history here goes:
    Looks like you have many plugins in your safari.
    Disable all plugins except silverlight and try Netflix.
    Try Chrome.
    Once you run HULU the flash plugin it eat up hundreds of megabites of ram and then KEEP them for hours. It is a FLASH problem.
    If you run Netflix (silverlight) after you run Hulu, you will run out of memory pretty quickly. The solution is to quit (not just close) Safari and then go to netflix.
    Look at your activity monitor while you are using Netflix. How is your RAM and CPU usage?
    Also Comcast (and the like) sometimes throttles your internet connection. Make sure your internet connection speed is still just as fast as it used to be.

  • Poor quality song from Itunes

    I just bought a song from itunes and the quality was poor (there was a gap in the middle of the song). Is there a way to get my money back or a better quality download of the song from itunes?

    Go here -> http://www.apple.com/support/itunes/store/browser/

Maybe you are looking for

  • Analyzer 7.2.5.5.19 JRE Compatability - Highest Version ???

    Have conflict in house with varying versions of JRE on user pcs when User does not have Admin rights to the PC. Problem made worse by multiple JRE's on PCs. Have installed 7.2.5.5.19 with JRE 1.4.2_12 which works OK in test but are wanting to minimis

  • Modifying a path in Photoshop CS6

    Hi everyone, I have a problem since I upgraded from Photoshop CS5 to CS6. I draw a path with Pen tool, with two points. I used to move the path beetween the points to change the path without moving the tangents. I tried to explain it with an image :

  • Using Reflection - Method.invoke()

    Hi all, Facing a problem in using the Reflection API. Can anyone tell me how to use the invoke, which is available with Method. Problem statement. - I want to create a method. And then invoke that method using method1. invoke. But this can take only

  • RSPAN configuration

    Hi, I'm trying to configure a RSPAN with multiple source ports on multiple switches and 1 destination port. On the first switch I have : Session 1 Type                   : Remote Source Session Source Ports           :     Both               : Po2 De

  • Lion on MacMini server fails on mirrored drives

    Hello last year I bought an MacMini server (10.6). Which I installed with mirrored harddrives (2 partitions, one partition for OS and one for the ServiceData). Everything worked fine. Upgrading to Lion messed up the whole system so i decided to start