Slow slow slow slow loupe

Using Aperture 2.1.4 and Snow Leopard on a MBP 15" original with 3Gb ram. The loupe works great on first image viewed but in each following image the loupe takes many seconds to appear and is nearly impossible to use. If I try dragging it there is a very long delay (many seconds to respond) and impossible to get it aimed correctly. I'm in focus on loupe mode. Focus on cursor mode works slightly better. Restarting Aperture is no help. Restarting MBP helps on first image. Also tried using a smaller referenced library with one project. Same problem.
Any help is appreciated,
BobM

I find that temporally turning off Highlight & Shadow helps big time.
I hope this helps.
Simon Clifford-Smith

Similar Messages

My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.

My apple tv mirroring is slow. So slow it shuts off. Any thoughts on cause? I use this device in my office for presentations without a problem. In my home with a stronger wifi router, I'm having issues.

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Ipad 4 retina display is slow after iOS 8, also upgrade the the iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great.

ipad 4 retina display is slow after iOS 8, also upgrade to iOS 8.0.1 i think and safari is slow, animations are slow, and i can't restore it to iOS 7, there it was great. i mean its like my iphone 4 with iOS 7 in its best days. i hope no to get stuck again, i mean please let me go to the iOS 7)).

Upgraded my ipad4 from ios6 to iOS 8 because the new WSJ app required it. HUGE MISTAKE!!!!!!! I can maybe understand some apps being slower but not Safari or Chrome. Apple must be throttling back the ipad4 processor even more with ios8 to force an upgrade to the next gen iPad whenever it arrives.

Power PC, 10.5.8, 1.8GHz single . . . Recently running very slow, currently VERY slow. I. Must have a bug. What's the best virus scrubber out there? Thanks.

Power PC, 10.5.8, 1.8GHz single . . . Recently running very slow, currently VERY slow. I. Must have a bug. What's the best virus scrubber out there? Thanks.

Hi, likely somethiung else, but Free Sophos...
http://www.sophos.com/products/enterprise/endpoint/security-and-control/mac/
Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
In the Memory tab, are there a lot of Pageouts?

My 24" IMac is slow and getting slower and over heats

24" IMac 2.8Ghz, 4G of Ram 320G Intel HD O/S Mavericks 10.9.5
Computer is slow and getting slower.
Seems to overheat and freeze when processing video
Sepearte issue blue tooth not working Computer says now hardware

EtreCheck version: 1.9.15 (52)
Report generated 7 October 2014 3:14:24 pm AEDT
Hardware Information: ?
iMac Intel Core 2 Duo (aluminum enclosure) (Early 2008)
iMac - model: iMac8,1
1 2.8 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information: ?
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1920 x 1200
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 1:3:9
Disk Information: ?
WDC WD3200AAJS-40VWA1 disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (179.11 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information: ?
Apple, Inc. Keyboard Hub
Mitsumi Electric Apple Optical USB Mouse
Apple, Inc Apple Keyboard
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.elgato.driver.DontMatchAfaTech (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergy450 (1.1) Support
[not loaded] com.elgato.driver.DontMatchCinergyXS (1.1) Support
[not loaded] com.elgato.driver.DontMatchEmpia (1.1) Support
[not loaded] com.elgato.driver.DontMatchVoyager (1.1) Support
[not loaded] com.microsoft.driver.MicrosoftMouse (7.0.0) Support
[not loaded] com.microsoft.driver.MicrosoftMouseBluetooth (7.0.0) Support
[not loaded] com.microsoft.driver.MicrosoftMouseUSB (7.0.0) Support
[not loaded] com.wdc.driver.1394HP (1.0.9) Support
[not loaded] com.wdc.driver.USBHP (1.0.11) Support
Startup Items: ?
EyeConnect: Path: /Library/StartupItems/EyeConnect
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[running] com.wdc.SmartwareDriveService.plist Support
[running] com.wdc.WDSmartWareService.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
iTunesHelper
AdobeResourceSynchronizer
Skype
EyeTV Helper
MicrosoftMouseHelper
Dropbox
WDQuickView
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 5.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.3 Support
OVSHelper: Version: 1.1 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.1 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0 - SDK 10.8
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.12 Support
EPPEX Plugin: Version: 10.0 Support
Safari Extensions: ?
DivXHTML5
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
DivX Support
Flash Player Support
Flip4Mac WMV Support
Microsoft Mouse Support
Time Machine: ?
Skip System Files: NO
Auto backup: YES
Time Machine not configured!
Top Processes by CPU: ?
      2% WindowServer
      0% fontd
      0% MicrosoftMouseHelper
      0% Dropbox
      0% aosnotifyd
Top Processes by Memory: ?
221 MB Safari
147 MB com.apple.IconServicesAgent
139 MB com.apple.WebKit.WebContent
135 MB com.apple.WebKit.Plugin.64
131 MB Solitaire
Virtual Memory Information: ?
604 MB Free RAM
1.93 GB Active RAM
1010 MB Inactive RAM
504 MB Wired RAM
451 MB Page-ins
0 B Page-outs

IE 11 Slow Slow Crash Reload Slow

IE 11 comes with Windows 8.1 today is 10.09.2013 and IE 11 is not ready for prime time, it's slow, crashes, slow, non-responsive, slow, sends error logs...blah blah blah. Now here's the bad news, you cannot load any other IE browser on Windows 8.1.
The good news, Chrome works flawlessly on Windows 8.1
JP Cowboy Coders Unite!

MSFT releases MS13-088... Containing these fixes:
General distribution release (GDR) fixes
Individual updates may not be installed, depending on your version of Windows and the version of the affected application. Please view the individual articles to determine your update status.
Collapse this tableExpand this table
Article number
Article title
2905735
      (http://support.microsoft.com/kb/2905735/            )
The shadow of a layout element is not resized when you use the "box-shadow" property in Internet Explorer 10
2905734
      (http://support.microsoft.com/kb/2905734/            )
Clipping of an ActiveX control occurs on the wrong side when the control is overlaid by an IFRAME in RTL mode in Internet Explorer 10
2905733
      (http://support.microsoft.com/kb/2905733/            )
Internet Explorer loses HTTP connections when you close a webpage before you receive an XHR response
2905731
      (http://support.microsoft.com/kb/2905731/            )
The blinking cursor disappears when you click in a text box that hosts a WebBrowser ActiveX control in an MFC application in Internet Explorer 10
2905730
      (http://support.microsoft.com/kb/2905730/            )
A webpage that uses intrinsic HTML controls may crash in Internet Explorer 10
2905729
      (http://support.microsoft.com/kb/2905729/            )
A Select box in Internet Explorer 10 shifts downward when you rest the mouse pointer over it
2905727
      (http://support.microsoft.com/kb/2905727/            )
The focus to a webpage is lost when replacing the surrounding container of a focused element by using the innerHTML property in Internet Explorer 10 when Compatibility View is used
2905724
      (http://support.microsoft.com/kb/2905724/            )
An update is available to disable the visited Selectors property values from the CSS Transitions and Animations processor in Internet Explorer 10
2905722
      (http://support.microsoft.com/kb/2905722/            )
Incorrect cell spanning occurs in some document modes in Internet Explorer 10
2904452
      (http://support.microsoft.com/kb/2904452/            )
SVG content that contains an SVGUseElement object may cause Internet Explorer to leak memory when you use the DOMParser.parseFromString method
2904451
      (http://support.microsoft.com/kb/2904451/            )
Internet Explorer may leak memory when you use the DOMParser.parseFromString method to parse SVG content that is contained in a script tag
2896552
      (http://support.microsoft.com/kb/2896552/            )
Some Scalable Vector Graphics patterns are not displayed correctly in Internet Explorer 10
2894776
      (http://support.microsoft.com/kb/2894776/            )
The XMLHttpRequest object cannot post data when a new HTTPS connection is established that requires a client certificate in Internet Explorer
2893362
      (http://support.microsoft.com/kb/2893362/            )
A fragment identifier is not preserved in the Window.Location.href property for a POST request in Internet Explorer
2879488
      (http://support.microsoft.com/kb/2879488/            )
An IFRAME vertical scrollbar is not displayed correctly in Internet Explorer 10
2854669
      (http://support.microsoft.com/kb/2854669/            )
Cookies are not sent when a new tab is opened from a home page in your trusted sites or in your Intranet zone in Internet Explorer 10
2907803
      (http://support.microsoft.com/kb/2907803/            )
Update that disables Enhanced Protected Mode by default in Internet Explorer 11
2907809
      (http://support.microsoft.com/kb/ 2907809 /            )
SSO service does not work in Internet Explorer 11
2907807
      (http://support.microsoft.com/kb/ 2907807 /            )
Cookie-related issues occur when you go to certain websites and EPM is enabled in Internet Explorer 11
2907806
      (http://support.microsoft.com/kb/ 2907806 /            )
Blank webpage is displayed when you open a link in a new tab in Internet Explorer 11
2907805
      (http://support.microsoft.com/kb/ 2907805 /            )
Predictive text is not displayed when you interact with RTL text by using a touch keyboard in Windows 8.1
2907804
      (http://support.microsoft.com/kb/ 2907804 /            )
Black region is displayed on a Lync 2010 chat window on a Windows 8.1-based computer that has Internet Explorer 11 installed
JP Cowboy Coders Unite!

My Macbook Pro is about 4 to 5 years old. I've noticed the last few months that speed was becoming much slower. It slowed to a crawl last week and won't even turn on now. Where do I take this to near Jackson, Michigan for service?.

My Macbook Pro is about 4 to 5 years old. I've noticed the last few months that speed was becoming much slower. It slowed to a crawl last week and won't even turn on now. Where can I take my Macbook Pro for service near Jackson, Michigan?.

Things You Can Do To Keep Your Computer From Slowing Down
If your computer seems to be running slower here are some things you can do:
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

Slow system, very slow word and excel

Hello there
Since I updated to 10.4.10 everything I do on my MBP seems to take a long time. To open a simple word or excel file takes about 15 seconds!!!
With 10.4.9 it was much faster
Any suggestions about speeding up the MBP?

Get Cocktail, run all the tasks on the Pilot tab once a week. Don't use any other tabs unless you know their meaning. Best maintenance app for newbies even though it costs a whopping $12 or $15.
Until Office for the Intel CPU comes out , the old Office for Macs are a little slow so wait (a complete waste of money upgrading just for faster opening, in my opinion even when it does come out) or at least try the above.

Mac running slow, safari very slow.

My Mac has been running much slower than usual lately... I downloaded EtreCheck and here are the results:
Can someone take a look and tell me what I should do to fix my mac? It says I have 2gb of "page outs" and lots of problem system launch agents...
EtreCheck version: 2.0.6 (91)
Report generated October 19, 2014 at 10:36:46 PM PDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 3 days 3:39:6
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (312.53 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.cmfsyncagent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.EscrowSecurityAlert.plist
[failed] com.apple.gamed.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.SafariNotificationAgent.plist
[failed] com.apple.sbd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.security.cloudkeychainproxy.plist
[failed] com.apple.spindump_agent.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.AssetCacheLocatorService.plist
[failed] com.apple.awdd.plist
[failed] com.apple.corestorage.corestoragehelperd.plist
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.diagnosticd.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.nsurlsessiond.plist
[failed] com.apple.periodic-daily.plist
[failed] com.apple.sandboxd.plist
[failed] com.apple.softwareupdate_download_service.plist
[failed] com.apple.systemstats.analysis.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
[failed] com.apple.xpc.smd.plist
[failed] org.cups.cupsd.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.google.keystone.agent.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
SpeechSynthesisServer ApplicationHidden (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks /SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Silverlight: Version: 5.1.30514.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User Internet Plug-ins: ℹ️
RealPlayer Plugin: Version: (null) Support
Safari Extensions: ℹ️
AdBlock
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      9% syncdefaultsd
      7% IMDPersistenceAgent
      6% WindowServer
      4% coreaudiod
      3% securityd
Top Processes by Memory: ℹ️
434 MB iTunes
249 MB Safari
139 MB com.apple.WebKit.WebContent
69 MB com.apple.iTunesLibraryService
56 MB mds_stores
Virtual Memory Information: ℹ️
160 MB Free RAM
1.48 GB Active RAM
1.35 GB Inactive RAM
789 MB Wired RAM
39.54 GB Page-ins
2.10 GB Page-outs

What version of Mac OS X?
What home page?
What browser?

Slow loading laptop, slow loading laptop

Hi I have done everything I can think off that apple has told me to do to help my laptop, it opens and shut's great now but when loading pages it is so slow and the timer spins for ages........any help from anyone would be greatly appreciated please x

It's a step by step guide. It's written for the average users who doesn't know the technical aspects of it.
You can use Domain Name System (DNS) servers and search domains to avoid typing the complete address of Internet domains you use frequently.
DNS is the way Internet domain names are located and translated into Internet Protocol (IP) addresses.
The search domains you enter in your Network preferences are automatically appended to names you type in Internet applications.
For example, if you specify the search domain apple.com, typing “store” in your web browser takes you to store.apple.com. Or, if you use campus.university.edu as a search domain, you can type “server1” in the Finder’s Connect To Server dialog to connect to server1.campus.university.edu.
To enter a DNS server address and search domains:
Choose Apple menu > System Preferences, and then click Network.
Select the network connection service you want to use (such as AirPort or Ethernet, unless you named it something else) from the list, and then click Advanced.
Click DNS, and then click Add at the bottom of the DNS Servers list. Enter the IPv4 or IPv6 address for the DNS server.Click Add at the bottom of the Search Domain list and enter the search domain, apple.com for example.
When you’re finished, click OK.
Domains are searched in the order you list them, and the search stops when a valid name is found.
To search a name hierarchy, use search domains of varying scope. For example: building.campus.university.edu, campus.university.edu, university.edu.
I wouldn't be able to say this any better than the guide. I can recommend Google's DNS servers which I use:
8.8.8.8
8.8.4.4
So you won't have to search for that. If the above doesn't work, try disabling DNS prefetching which is also explained step by step in the support article:
http://support.apple.com/kb/TS3408

Why is my macbook pro running so slow and so slow to reboot?

Hello,
I edit using Lightroom and Photoshop and I'm having an issue while editing. After editing around 8-10 photos in Photoshop the computer starts running unbelievably slow. After each 8-10 photos I have to close down everything and reboot. Even the reboot process is super slow as I have to force quit each application usually 1-2 times to get it to close. Is this normal? I have a 2011 17" with 2.2 GHZ i7 with 8GB ram. Is there any setting that I can change or be aware of.
Thanks,
Jack Fussell

If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step. Launch the Console application in the same way as above, and select “system.log” from the file list. Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.
Step 3
Same as step 2, but select "kernel.log" from the file list.

Slow start up, slow start up

So i have the 2011 mac pro just 3 months old realy fast, lately ive been getting a slow start up.
Im doing music using garageband for now, lots of tracks sometimes im doing 12 tracks at once.
Can this slow me up?
What do i need to do or get to mantain speed ?

Check your system preferences→ accounts→ login items. You may have a bunch of applications set to start off upon boot.

Slow boot, getting slower

Hi, I see this topic has featured in a number of posts, so my apologies in the event that I am duplicating questions that have already been answered.
My issue is that my MacBook has been getting slower and slower. It is a late model 2.26 ghz with 2 gbtes or ram and I have maintained all OS updates.
I have done the hardware tests, smart etc and all seems ok. It is taking longer to book than my three year old macbook pro that is running Tiger. It is a recent issue because the macbook was always faster in the past. Not sure why???
I would appreciate any advice

It's a popular topic
Repair Permissions: This should be done after all software installs and updates.
1. Navigate to Utilities/DiskUtility and launch Disk Utility.
2. Choose your volume (usually the second icon)
3. Choose "First Aid" tab
4. Click on "Repair Permissions"
Also run "verify" disk. If the disk needs repair:
Repair Disk:
Steps for using Disk Utility
1. Insert your Mac OS X Install DVD, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.) Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair.
If you repair errors run it until no errors found.
Test your startup, these steps alone may improve it.
Then, try starting up Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
Go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to/Users/yourname/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving/Users/yourname/Library/Fonts to your desktop and restarting.
Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
If you still have problems then, you may be able to repair this with the The 10.6.4 Combo Update This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before.
Remember to Verify Disk before update and repair permissions after update from /Applications/Utilities/Disk Utility.
-mj

Slow Start-Up / Slow Detection to double click

Hi,
My ibook has been ok until my friend installed a 1 GB fonts into my com, and this resulted in a slow start up to my ibook, even though ive already uninstalled it.
Secondly, the com also seems to be slower in detecting double clicking.
Anyone can solve the problem???
Angela An

Hi, Angela. Welcome to Apple Discussions.
Have you tried resetting the PMU?

Illustrator CS3: Very Slow Open, Very Slow Save

Hello all,
I just recently have been issues with Illustrator CS3. Up until about a few weeks ago, it had been running flawlessly. Now, whenever I try to open up any EPS or AI, Illustrator will literally take at least a minute to open it. This happens with a complex 2mb AI files, but also for a tiny simple files consisting of a 1" square on a blank artboard. No matter the file size, it will take around a minute to open it up.
Opening a 44kb .eps: 75 seconds
Opening a 210kb .ai file: 67 seconds
Saving a 76kb .eps: 56 seconds
Export to grayscale PNG: 66 seconds
Export AI Layers to SWF Files: 2 seconds
This is ridiculous.
Saving is the same issue. It takes a ridiculously long time to save even a blank document.
It's not my machine (2x2.66ghz Intel Mac with 5gb ram, OSX 10.5.6). Photoshop feels a little sluggish too, but not to this extent. InDesign, Flash, Dreamweaver, Acrobat all run perfectly. I even uninstalled all the CS3 products and reinstalled to find the same issues. And now that I've been given a time sensitive job, I need to get this program running quickly again.
I'm not sure what I can do to solve the problem, aside from trying to reinstall OSX and start fresh. Any and all help is appreciated! Thank you!

Well, I reinstalled Mac OS X before even trying those methods. It was less of a hassle than I thought it would be. Solved the problems with Illustrator. Everything is running fantastic.
But, I was just working in Photoshop, opening about ~20-30 small PNG's at a time to resize, grayscale, etc. I opened up about 60 at once to make things go quicker. They all opened up, with a little bit of lag. Now, if I even try to open up 10-15 PNG's at a time, they load very slow, like the problem I was having before with Illustrator...
Is there anyway to reset some memory settings? Or clear some cache? I believe this is what caused my issues with Illustrator before (opening too many files at once.)

My MacBook Pro suddenly became very slow, cursor responding slowely

My MacBook Pro suddenly became very slow, cursor responding slowely

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.evenflow.dropbox com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Broadcom|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print}; /v6:/{if ($2 !~ "A") print}'`; Pm "TCP/IP"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`find . -maxdepth 1 -exec basename {} + | while read f; do [[ ("$f" =~ ^\.. && ! "$f" =~ ^\.(adobe|android|bash.+|CFU.+|cache|config|cups|dropbox|DS_Store|font.+|git.+|profile|rnd|sh_.+|ssh|subv.+|Trash(es)?|zprofile|zsh.+)$) || ($(stat -f%f "$f") -ge 32768 && "$f" != Library) ]] && ls -Fd "$f"; done`; Pm "Hidden user files"; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Slow slow slow slow loupe

Similar Messages

Maybe you are looking for