Slow slow slow
i've got adobe illustrator CS installed and, while i don't usually have problems with simple black and white jobs (mostly type) i just downloaded a PNG file and now my illustrator file takes almost 10 minutes to save. that's part of my problem... but also, it is slowing everything, including getting to the web: now nothing is responding while the illustrator file is saving.
anything i can do to free up the RAM? there really should be enough, and i haven't had any problem, but i don't really understand PNG files... thanks
HI,
Make sure there's enough free disk space.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 10% to 15% free disk space at all times.*
Booting Safe Mode deletes font caches which may help since you run Illustrator.
Try booting in Safe Mode
What is Safe Mode
If your profile is up to date and you are running 10.5.3, update your system software. Install the 10.5.8 Combo Update
Then repair disk permissions...
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn
Similar Messages
-
FIRE FOX USED TO BE A FAST BROWSER BUT IT IS GETTING SLOWER AND SLOWER. THE BLUE-E IS ABOUT TO THE POINT OF BEING FASTER THEM THE FOX. I HAVE ALWAYS LIKE THE FOX, JUST WANT TO FIGURE OUT THE PROBLEM WITH IT AND THE LONGER I HAVE THE WINDOW OPEN ARE UP THE WORSE IT GETS. I DO A LOT OF GAMING ON FACEBOOK PLAYING MAFIA WARS BUT THE PROBLEM IS NOT LIMITED TO JUST THERE IT IS ALL THE TIME AND EVERY WHERE. I HAVE TRIED ADD-ON'S THINKING THEY MAY HELP BUT NOTHING HAS DONE ANY GOOD. CHROME IS TWICE IF NOT THREE
TIMES AS FAST AS THE FOX LATELY ON LOADING PAGES.For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
Macbook Pro getting slower and slower, freezing all the time
Hi,
My early 2011 Macbook Pro is gettin slower and slower, and I'm pretty sure Mavericks only worsened the condition. This is my report, can someone help me on why this is happening?
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
Startup Items:
FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
System Software:
OS X 10.9.1 (13B42) - Uptime: 1 day 1:28:0
Disk Information:
TOSHIBA MK5059GSXP disk0 : (500,11 GB)
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) /: 499,25 GB (54,63 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
JMicron USB to ATA/ATAPI bridge 500,11 GB
EFI (disk2s1) <not mounted>: 209,7 MB
Filmes (disk2s2) /Volumes/Filmes: 499,76 GB (330,53 GB free)
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. iPhone
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
de.novamedia.driver.NMSmartplugSCSIDevice (1.0.1)
com.Cycling74.driver.Soundflower (1.5.1)
com.bresink.driver.BRESINKx86Monitoring (8.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.Helper-Tool.plist
Launch Agents:
[failed] com.brother.LOGINserver.plist
[loaded] com.oracle.java.Java-Updater.plist
[loaded] de.novamedia.VodafoneDeviceObserver.plist
User Launch Agents:
[failed] com.akamai.single-user-client.plist
[loaded] com.facebook.videochat.[redacted].plist
[failed] com.google.GoogleContactSyncAgent.plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.spotify.webhelper.plist
[loaded] com.valvesoftware.steamclean.plist
User Login Items:
uHD-Agent
GrowlHelperApp
Alfred
uTorrent
Dropbox
iShutdown
HyperDock Helper
Assistente de gestor de conteúdo
3rd Party Preference Panes:
Akamai NetSession Preferences
Fan Control
Flash Player
Flip4Mac WMV
Growl
HyperDock
Java
Internet Plug-ins::
DirectorShockwave: Version: 11.5.9r620
o1dbrowserplugin: Version: 4.9.1.16010
Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1
RealPlayer Plugin: Version: Unknown
Silverlight: Version: 5.1.20913.0 - SDK 10.6
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 4.9.1.16010
npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
JavaAppletPlugin: Version: Java 7 Update 45
Bad Fonts:
None
Old applications:
Content Manager Assistant: Version: 1.10.4086.78 - SDK 10.5
/Users/duarte_cunharosa/Applications/CMA.app
Content Manager Assistant: Version: 1.10.4086.78 - SDK 10.5
/Applications/CMA.app
FacebookVideoCalling: Version: 1.2.0.157 - SDK 10.5
/Users/duarte_cunharosa/Library/Application Support/Facebook/video/1.2.0.158/FacebookVideoCalling.app
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Document Connection.app
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
Microsoft Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Excel.app
Microsoft Graph: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Graph.app
Microsoft Language Register: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
Microsoft Outlook: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Outlook.app
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft PowerPoint.app
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4
/Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
Microsoft Word: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Microsoft Word.app
Miro Video Converter: Version: 2.6 - SDK 10.0
/Applications/Miro Video Converter.app
My Day: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/My Day.app
Open XML for Excel: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Open XML for Excel.app
Plants vs: Version: 1.0.40 - SDK 10.5
/Applications/Plants vs. Zombies.app
RipIt: Version: 1.6.2 - SDK 10.5
/Applications/RipIt.app
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Solver: Version: 1.0 - SDK 10.5
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SyncServicesAgent: Version: 14.3.9 - SDK 10.5
/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
UPlayBrowser: Version: 1.0.1.23853 - SDK 10.5
/Library/Application Support/Ubisoft/Assassin's Creed Brotherhood/UPlayBrowser.app
Time Machine:
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 464.96 GB Disk used: 414.09 GB
Destinations:
Time Machine [Local] (Last used)
Total size: 698.32 GB
Total number of backups: 3
Oldest backup: 2013-12-20 18:10:54 +0000
Last backup: 2013-12-22 19:52:17 +0000
Size of backup disk: Too small
Backup size 698.32 GB < (Disk used 414.09 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
9% Transmission
4% Dropbox
2% WindowServer
2% Dock
1% Google Chrome
Top Processes by Memory:
123 MB Google Chrome
119 MB iTunes
102 MB Dropbox
87 MB Google Chrome Helper
66 MB Finder
Virtual Memory Statistics:
148 MB Free RAM
995 MB Active RAM
859 MB Inactive RAM
1.03 GB Wired RAM
7.80 GB Page-ins
4.84 GB Page-outsIf you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, use that.
Below are instructions to enter UNIX shell commands. They do nothing but produce human-readable output. However, you need to think carefully before running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(grep [^[:blank:]] "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; { system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will beautomatically copied to the Clipboard. All you have to do is paste into a reply to this message by pressing command-Vagain. Please don't copy anything from the Terminal window. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2>&- | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal. Please note:
☞ Steps 1 and 2 are all copy-and-paste — type only your login password when prompted.
☞ When you type your password, you won't see what you're typing.
☞ If you don’t have a password, set one before taking Step 2. If that’s not possible, skip the step.
☞ Step 2 might not produce any output, in which case the Clipboard will be empty. Step 1 will always produce something.
☞ The commands don't change anything, and merely running them will do neither good nor harm.
☞ Remember to post the output. It's already in the Clipboard. You don't have to copy it. Just paste into a reply
☞ If any personal information, such as your name or email address, appears in the output of either command, anonymize it before posting. Usually that won't be necessary.
☞ Don't post the contents of the Terminal window.
☞ Don't paste the output of Step 1 into the Terminal window. Paste it into a reply. -
Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time.
When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
Why is my iPod touch getting slower and slower
Please can anyone tell me why my iTouch is getting slower and slower?
also why do we have to do so many updates?
Can I go back to the original software for my ipod touch?
sorry for so many questions but they are related- All I can say in this Apple forum is that downgrading the iOS is not supported by Apple.
- Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
- Restoring the iPod also helps -
My 2010 Macbook pro is running slower and slower. I went to the Genius Bar about eight months ago, and they botted up from the disk, and let it go through and find what its process to find and fix what I think were "orphan" files. I cannot remember what they did, but when they did it, the speed on my Macbook picked up considerably.
I have since upgraded to Mountain Lion, but these problems do not seem related to that. My 500 GB HDD is about 80% full.First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
So i just got my ipod august 2012. about 1 month ago, my home button stopped working and my ipod is getting slower and slower. Would apple be able to fix it for free?
Ipods automatically have a one year warrany unless you have violated the terms. But you can pay to extend the warranty. It depends, they may fix it for free or they may charge a bit. Im not entirely sure. But id say theres a good chance that they may fix it for free. With battery replacements, ive heard that they give you an entirely new ipod with a charge of $80. So i think it depends
-
Mac book pro getting slower and slower
My 3 tear old mac book pro is getting slower, and slower and slower?
How large is your HD and how much space do you have left?
Check out the following & do the necessary:
User Tip: Why is my computer slow?
What to do when your computer is too slow
Speeding up your Mac -
My iMac is getting slower and slower
My Mac (3.2GHz Intel Core i3 4GB Memory) is about 4 years old and has been getting slower and slower over the last 5 or 6 months. An earlier post recommended using 'Etracheck' which I have done and attached the information below. I think I may have a Ram issue but I would be grateful for any comments.
Thanks
Hardware Information: ℹ️
iMac (27-inch, Mid 2010) (Verified)
iMac - model: iMac11,3
1 3.2 GHz Intel Core i3 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 5670 - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 6 days 16:10:12
Disk Information: ℹ️
SAMSUNG HD103SJ disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 999.35 GB (629.98 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5680H
USB Information: ℹ️
Canon MG4200 series
Primax USB OPTICAL MOUSE
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Western Digital My Passport 070A 999.5 GB
S.M.A.R.T. Status: Verified
EFI (disk4s1) <not mounted> : 210 MB
Backup (disk4s2) <not mounted> : 999.16 GB
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.67) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.67) Support
Startup Items: ℹ️
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
Startup items are obsolete and will not work in future versions of OS X
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.CallHistorySyncHelper.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.icloud.fmfd.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
[failed] com.apple.telephonyutilities.callservicesd.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.awdd.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.icloud.findmydeviced.plist
[failed] com.apple.ifdreader.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.periodic-weekly.plist
[failed] com.apple.tccd.system.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[invalid?] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBLaunchAgent.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.ea.origin.ESHelper.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[invalid?] com.oracle.java.Helper-Tool.plist Support
[running] com.rim.BBDaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ℹ️
BlackBerry Device Manager ApplicationHidden (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
Internet Plug-ins: ℹ️
Unity Web Player: Version: UnityPlayer version 4.1.2f1 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.4.2 Support
AdobePDFViewerNPAPI: Version: 10.1.12 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.4.4 - SDK 10.6 Support
AdobePDFViewer: Version: 10.1.12 Support
EPPEX Plugin: Version: 10.0 Support
User Internet Plug-ins: ℹ️
BlueStacks Install Detector: Version: Unknown
Picasa: Version: 1.0 - SDK 10.4 Support
Safari Extensions: ℹ️
Slick Savings
Searchme
Amazon Shopping Assistant
Ebay Shopping Assistant
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 369.37 GB
Destinations:
Backup [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 369.37 GB X 3)
Top Processes by CPU: ℹ️
3% WindowServer
0% AppleSpell
0% BBLaunchAgent
0% coreservicesd
0% Microsoft Word
Top Processes by Memory: ℹ️
180 MB Mail
176 MB iTunes
64 MB softwareupdated
52 MB Safari
47 MB mds_stores
Virtual Memory Information: ℹ️
35 MB Free RAM
824 MB Active RAM
808 MB Inactive RAM
652 MB Wired RAM
19.96 GB Page-ins
1.41 GB Page-outsThese instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
Only when I'm in mozilla, the enter key becomes slow, very slow to change paragraph
Only when I'm in mozilla firefox, the "enter" key becomes slow, very slow, to change paragraph. I do not this happens in "Word" and I do not this happens in other browsers. A
nyone know what happens? (I have a good updated antivirus, there is not the problem). W
hile waiting for an answer, thanks. M
aurostiYou could adjust the mailnews.tcptimeout preference, as explained in the 2nd point in [http://kb.mozillazine.org/Can_not_send_large_attachments this article]. Also, make sure there's no security program scanning outgoing mail attachments.
-
After starting up, it seems to get slower and slower until it times out
It starts up fine, but then it gets slower and slower until it either freezes or it times out.
Try to boot up in safe mode by holding the shift key down when the computer starts up:
http://support.apple.com/kb/HT1564 -
Was iOS 5 meant for iPad 1st generation? Ever since updating it is slower and slower.
Was iOS 5 meant for iPad 1st generation? Ever since updating it is slower and slower.
When I first updated my original,iPad I had a number of issues with it, crashes, some sluggishness, and things like that. When the infest incremental update was released a little while later, it seemed to fix the issues on the iPad - or at least it made a very big difference.
I never updated it all the way to 5.1.1 - because I bought the new iPad so I have no first hand experience with 5.1.1 on the original iPad.
You can try some basic troubleshooting steps and see if they make a difference.
Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Sometimes this can help. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If you have issues with Safari - Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button. -
My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?
jean-michel from France wrote:
My Mac Book air gets slower and slower. Is there any software or application to increase perfromance ?
Try this program to clean and optimize your Mac:
http://www.macupdate.com/app/mac/11582/onyx
It works for me! Air i7. -
Our 4 plus year old Mac-Mini has gotten slower and slower. Is there a utility that would help speed it up or is there another?
Hello! I’ve offered the steps below to similar posts in the past and they helped out getting to the solution (or at least find the cause). I suggest them to you too in this case. It will take you about 30 minutes or less to do these, depending on how bad the problem on your Mac is.
The goal here is to boot your Mac to the so-called Recovery partition where you’ll have a chance to repair the disk and the disk permissions using the Disk Utility and Password Utility. This might solve your issue and even if it doesn’t- it’s still a decent maintenance step to perform. These steps won’t erase your data or reinstall your Mac in any way if you follow instructions carefully.
Here’s how:
1/ Make sure your computer is completely shut down.
2/ You’ll have to be quick next: Press the Mac’s power button. As soon as you either hear the loud chime, or see the display light up - usually after a second or 2 - on your keyboard press [cmd] + [r] Keep these keys on your keyboard pressed until you either see an Apple Logo with a loading bar or a spinning gear.
After a few minutes, you’ll be presented with a Utilities screen. This is the Recovery partition. If this step is already giving you problems, try using a USB-keyboard. It doesn’t have to be an Apple-keyboard. If you have a Windows-tailored keyboard laying around, use the “Windows-flag” key in stead of the [cmd]-key and it should also work.
3/ Choose Disk Utility and click [continue]
Disk Utility will display your computer’s harddrive in the left column. The default name for it is “Macintosh HD” and is usually the second one from the top. Click on it and click on the [verify disk] button. This will check your “Macintosh HD” harddrive partition for errors. If found, click [repair disk] unless you have a Fusion drive in your Mac and it says [fix] instead of [repair disk] please tell us before you continue! For a screenshot of what I mean, check this article from Apple: http://support.apple.com/en-us/HT202574
4/ Once done with the verifying or repairing of your “Macintosh HD” click [repair disk permissions]
This will check your partition for permissions errors. A common myth about this feature is that it will fix all permissions issues on your Mac, which is not true, but it will fix most systemwide issues. Also, here is a list of error messages that you can safely ignore if they pop up:
http://support.apple.com/en-us/HT203172
5/ Lastly we shall do a permissions/Access Control List repair on specifically your user’s home folder with a somewhat hidden tool in the Recovery partition. Close Disk Utility and find the menu called “utilities” in the top left corner of your computer’s display. It’s in between the menus “edit” and “window” Don’t be confused with the menu called “os x utilities”
Choose Terminal. A somewhat old-fashioned looking window will pop up, waiting for a text command from you. This is the Terminal.
After the # type: resetpassword and press return. Note that there is no space between ‘reset’ and ‘password’
What you’ll see next is an rectangular window that gives you the option to reset passwords. We are not going to that, however. Instead, click on “Macintosh HD” at the top. In the pull-down menu below that, choose your user's accountname. Skip all the rest and at the very bottom click the [reset]-button.
A spinning gear will appear and may stay on for a second or several minutes. It’s hard to predict exactly how long.
If you have multiple users on your Mac, I advise you to repeat this step for all your users.
We’re ready to reboot your Mac now. Click on the Apple Menu and choose “startup disk” Choose to boot from “Macintosh HD” Please let us know if this solved your issue, or if the steps above did not work, or could not be performed for some reason.
If they worked I suggest you do these steps everytime your Mac becomes slow. -
MacBook Pro boot or shutdown getting slower and slower, is how is it, how to resolve?
MacBook Pro开机或关机越来越慢,是怎么回事,如何解决?Open your disk utility and verify your disk permissions - if errors are found - repair them and restart your macbook when it's done the repairs....
see if that sorts it out for you...
good luck -
I upgraded to Mavericks and my 2008 iMac is slower than slow.
I have a 2008 IMac with 2GB Ram and 320GB HD. I have been upgrading through out and up to Mountain Lion never had any issues with the new OS systems. I upgraded to Mavericks about 2 months ago and the system continues to get slower and slower to where I really do not want to use it any longer. I spoke to someone at apple and they said from all of the upgrades there are programs taking up overhead that no longer are needed. If I bring the computer in they can help resolve the issue. The Apple store is about an hour drive from where I live. Seems to me that there must be an easy fix. I am not that computer literater and switched from Windows to Apple because of the reputation. Now all I do is watch that colored pinwheel on my screen more than anything else. Does anyone have a simple suggestion or do I need to take it to Apple and have to pay them to fix what they have caused.
RAM is pretty cheap these days. It will depend on the exact model of iMac you have. Just for a rough idea I took a look here Computer memory upgrades for Apple iMac (Early 2008) Desktop/PC from Crucial.com and found a 2 x 2GB upgrade kit for $72.
Most of the sites that sell RAM have instructional videos you can watch so you can get an idea of how difficult the installation might be for you. I've installed RAM on my MacBook Pro and it was not very difficult, and the iMac installation looks easier than that. But that would depend on your own comfort level with doing it. I've done a lot of this sort of installation over the years on my Macs so I'm very comfortable. But you do have to be careful, as the innards of a Mac can be very sensitive to static electricity, and it is possible to damage components if you don't follow directions carefully. But I would see if there are software issues that can be addressed first before you go investing in more RAM.
Maybe you are looking for
-
Hi, The Eee Slate is really a great item. You can use as Tablet, Notebook or via HDMI as desktop computer with enough power. Consequently there should be dual boot with Arch :). Most problems of this special device I solved already and if anybody is
-
HI; I have an iPhone 4S Factory Unlocked, up to date (iOS 6.0.1). I connect it to my Laptop named "The Love" via USB and opend iTunes and checked Sync over Wifi to enable this feature. Everything works great. After a couple months I sold my Laptop an
-
i was installing a software update and as soon as i turned on my external hard drives my screen turned black and said i need to restart my computer. the software update didnt finish. when i turned my computer back on, it seemed fine except now a lot
-
I'm new at installing Plug-In filters. I have downloaded a plug-in that has these file types: .bf and .fpx Total files in the download (10) FPX and (1) BF. I'm using Photoshop Elements 7. Am I supposed to install the .fpx files? Thanks very muc
-
I know I am using an older system. Get notices to upgrade. Need to know if these upgrades are compatible with W2000Pro.