Slow speed after new dropline fitted.......Possibl...
Hello all,
I have had a new dropline fitted to cure a worsening crackle on my line (particularly when it was raining), however my broadband speed has now dropped to 2mb/s whereas prior to this fault it was running at approx 14mb/s.
I realise there is a training period, and sure enough my hub rebooted after 4 days and increased my upload speed ip from 400kb/s to 888kb/s, but the download ip stayed at 2mb/s. After a day it rebooted again at about 5 in the morning but with no improvement in my ip's. My current hub status is;
ADSL Line Status
Connection Information
Line state:
Connectedppp0_0
Connection time:
2 days, 02:30:14
Downstream:
2.213 Mbps
Upstream:
888.9 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
24.6 dB / 13.2 dB
Line attenuation (Down/Up):
15.6 dB / 7.6 dB
Output power (Down/Up):
18.3 dBm / 12.4 dBm
FEC Events (Down/Up):
30 / 2540
CRC Events (Down/Up):
0 / 57
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 117
Error Seconds (Local/Remote):
0 / 9
If you found this post helpful, then please click the star on the left, after all, I'm only trying to help........
Solved!
Go to Solution.
The results of a speed test is;
1. Best Effort Test: -provides background information.
Download Speed
1.98 Mbps
0 Mbps
2 Mbps Max Achievable Speed
Download speedachieved during the test was - 1.98 Mbps For your connection, the acceptable range of speeds is 0.8 Mbps-2 Mbps. IP Profile for your line is - 2 Mbps
2. Upstream Test: -provides background information.
Upload Speed
0.7 Mbps
0 Mbps
0.83 Mbps Max Achievable Speed
Upload speed achieved during the test was - 0.7Mbps Additional Information: Upstream Rate IP profile on your line is - 0.83 Mbps
Is it possible I have a stuck IP profile ?
If you found this post helpful, then please click the star on the left, after all, I'm only trying to help........
Similar Messages
-
In the last 6 years i have taken 4 new contracts with BT after being offered a better deal on every occassion my speed has dropped from around 3 meg to less than 250 kb/s each time im met with the same requests when i call to plug my laptop in to the Ethernet and turn all other equipment off etc etc. eventually someone sorts the problem and im back to 3Meg again, I ve just spent an hr on the phone to india (4 different people) telling me there is no problem. Does anyone know what is happening, I have a feeling there is some sort of default setting which automatically resets when you sign up which restricts the line ! we are in a rural location and the exchange is quite a distance away. When i came here 7 yrs ago i was told we would never get more than half a meg, However i called so much they finally changed the contact connections and we rocketed to 3 meg. However many times i say to the sales staff please dont change anything and explain what has happened the speed drops the very next day !!!!! NO MORE NEW CONTRACTS FOR ME !!!! can anyone help please
welcome to the BT community forum where customers help customers and only BT employees are the forum mods
in order for the forum members to help please can you post the adsl stats from your router (unless HH4/5) may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems). when first test completes then run diagnostic test and post the results ( do not reset the router).
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Post Moved Slow-speeds-after-6-months
M oved to Infinity board http://community.bt.com/t5/BT-Infinity/Slow-speeds-after-6-months/td-p/767428
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’Hi Ryant, the test test says i should contact my isp, so i`ll give BT a ring. Cheers.
-
Slow speeds on new BT Service in comparison with o...
Hi all
I would love some help with this problem: I transferred by Sky package over to BT on 5 October and have seen a deterioration in speed since. I have called the Indian call centre several times and today, after I tried out a new BT Home Hub 2 they sent me, I'm at wits' end! The problem, needless to say, is consistently there.
For the record, I have made sure I've followed your forum's excellent help regarding improving slow speeds. I have ensured all my phone sockets are fitted with working ADSL filters. The Homehub has been moved around the room to several locations, all proving the interference I'm getting is not affected by location at home. My main socket for the hub is fitted with an Accelerator (which did make a slight improvement initially). However, the speeds I was enjoying prior to BT have diminished so far that it seems illogical that the problem exists at my end.
I have a BT Vision box too which works fine through the Comtrend ethernet / wireless sockets provided by BT. Turning these off has no effect on the speed. I bought a hub phone which works fine too.
Here are some stats from TBB's speed test. I performed a BT Speed test earlier and the results are consistently similar. I would have posted the BT results, but they reset before I could do so. Time pressures being what they are, I have to leave in a moment so I cannot wait another hour or so to repeat! 16/02/10 was Sky. Again, everything later than 05/10/10 is BT's.
Date Day Downstream Upstream IP Address Connection
22/10/10 13:03
Fri
2344 Kbps
979 Kbps
109.154.41.55
Home
22/10/10 12:59
Fri
2358 Kbps
993 Kbps
109.154.37.211
22/10/10 12:50
Fri
2358 Kbps
952 Kbps
86.164.97.1
Home
22/10/10 12:03
Fri
2352 Kbps
994 Kbps
86.164.112.90
Home
21/10/10 10:01
Thu
2358 Kbps
1006 Kbps
86.162.229.184
Home
21/10/10 00:22
Thu
2351 Kbps
1004 Kbps
86.161.133.160
Home
20/10/10 12:08
Wed
2350 Kbps
997 Kbps
109.154.61.63
Home
19/10/10 12:09
Tue
2335 Kbps
975 Kbps
109.154.54.181
Home
19/10/10 11:27
Tue
2358 Kbps
1007 Kbps
86.135.246.147
Home
19/10/10 10:23
Tue
2358 Kbps
1009 Kbps
81.151.117.214
Home
18/10/10 12:36
Mon
2356 Kbps
984 Kbps
86.162.39.124
Home
18/10/10 11:45
Mon
2355 Kbps
1012 Kbps
86.164.123.5
Home
18/10/10 07:21
Mon
2355 Kbps
1003 Kbps
86.164.102.77
Home
17/10/10 21:34
Sun
2337 Kbps
675 Kbps
86.164.101.119
Home
17/10/10 21:24
Sun
2358 Kbps
1006 Kbps
86.164.101.119
Home
17/10/10 20:48
Sun
2353 Kbps
1000 Kbps
109.154.54.225
Home
17/10/10 15:37
Sun
2352 Kbps
996 Kbps
109.155.87.201
Home
16/10/10 21:27
Sat
3297 Kbps
974 Kbps
86.162.39.84
Home
15/10/10 16:06
Fri
5175 Kbps
966 Kbps
86.135.242.120
Home
15/10/10 15:47
Fri
5175 Kbps
1002 Kbps
109.154.63.22
Home
15/10/10 07:14
Fri
5169 Kbps
1005 Kbps
86.162.33.250
Home
15/10/10 06:52
Fri
5170 Kbps
1010 Kbps
86.161.174.249
Home
14/10/10 15:00
Thu
7520 Kbps
1009 Kbps
86.135.246.216
Home
14/10/10 14:53
Thu
7470 Kbps
975 Kbps
86.135.244.53
Home
13/10/10 10:24
Wed
11262 Kbps
1009 Kbps
86.164.100.90
Home
13/10/10 08:56
Wed
10895 Kbps
1000 Kbps
86.164.98.118
Home
09/10/10 20:12
Sat
12890 Kbps
1002 Kbps
109.154.52.137
Home
08/10/10 12:40
Fri
14848 Kbps
1004 Kbps
86.164.123.214
Home
08/10/10 10:42
Fri
13914 Kbps
993 Kbps
109.154.55.120
Home
07/10/10 21:45
Thu
13800 Kbps
1007 Kbps
86.161.168.178
Home
07/10/10 15:05
Thu
14889 Kbps
1020 Kbps
109.154.53.241
Home
07/10/10 08:07
Thu
14594 Kbps
1006 Kbps
86.135.244.192
Home
06/10/10 09:47
Wed
6729 Kbps
995 Kbps
86.164.101.136
Home
05/10/10 20:12
Tue
7530 Kbps
957 Kbps
109.154.41.1
Home
16/02/10 15:48
Tue
13518 Kbps
764 Kbps
90.208.21.15
Home
26/11/08 16:07
Wed
6572 Kbps
320 Kbps
90.208.21.42
Home
03/08/08 16:59
Sun
6499 Kbps
317 Kbps
90.202.82.169
Home
03/08/08 16:57
Sun
6538 Kbps
319 Kbps
90.202.82.169
Home
22/04/08 16:16
Tue
1692 Kbps
346 Kbps
90.202.82.150
Home
18/08/07 10:51
Sat
1649 Kbps
343 Kbps
90.202.82.209
Home
I am running interleaved ADSL and am a WoW gamer. I'm not sure if this makes much difference...
Thank you very much in advance for your help. Pardon if I don't bother calling India again - they have been unhelpful in trying to solve this issue.
Regards
Si
Solved!
Go to Solution.Here's today's BT Speedtester result:
FAQ
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
1842 Kbps
0 Kbps
4000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 1842 Kbps
For your connection, the acceptable range of speedsis 1200-4000 Kbps.
Additional Information:
Your DSL Connection Rate :3072 Kbps(DOWN-STREAM), 1191 Kbps(UP-STREAM)
IP Profile for your line is - 2500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 11.07:25.17:63.76 (SBE:NBEBE)
These figures represent the ratio while sententiously passing Sub BE, Normal BE and Priority BE marked traffic.
The results of this test will vary depending on the way your ISP has decided to use these traffic classes.
2. Upstream Test: -provides background information.
Upload Speed
929 Kbps
0 Kbps
1191 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 929 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1191 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.
Please visit FAQ section if you are unable To understand the test results. -
SLOW speeds after sw update - Novatel 4G LTE router with voice
My device auto-updated to sw 2.0 and ever since am getting 1-3 Mbps up/down. Prior to the sw update, I was getting "normal" LTE speeds ranging from 15-25 Mbps up/down.
Verizon processed a replacement (was brand new, swapped in-store) with same experience. Speeds were normal but after a few minutes of being powered on, the router auto-updates to 2.0 and slow speeds thereafter.
Phone front line has been nice but since this device is so new hoping posting here with get the attention of someone to correct this issue. Swapping for replacement devices isn't solving the problem.
Anyone else? Ideas for a fix?Ok, I just followed JoeL and am awaiting approval. For reference, see the image of 3 speed tests this morning conducted on an LTE iPad. No other devices are connected to the router.
connected to the wireless network broadcast by the Verizon 4G LTE router - 0.6 down/up, unacceptable
connected straight to the Verizon LTE network - 34 down / 9 up, fine
home wireless network
The 1st test should look very similar to the 2nd since both are using the Verizon LTE network -
Hi,
We recently had a problem with our line (lots of noise), so an openreach engineer came out, who was very helpful, and replaced a large section of the outside line that had degraded and fitted a new master box. I was aware that after fixing the fault, I would have to wait for the broadband to retrain, and reset the noise margin on the IP profile.
But I was quite supprised that the day after my speed had actually reduced further. Ive phone the help line, where I was told there was a problem, but no-one seems to be able to sort it, and ive been told to wait. This is very annoying as I had over 11Mbps before the fault, and now its that slow its pretty much unusable for streaming video / games.
This is my current ADSL stats,
Downstream:
1.123 Mbps
Upstream:
440 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
18.4 dB / 28.6 dB
Line attenuation (Down/Up):
29.1 dB / 17.1 dB
Output power (Down/Up):
18.2 dBm / 12.5 dBm
FEC Events (Down/Up):
215 / 41
CRC Events (Down/Up):
0 / 11
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 7
Error Seconds (Local/Remote):
16 / 0
(before the fault, the nosie margin was ~7db each way)
Any Suggestions of what to do next would be greatly appreciated, as the call centre's dont seem to be of any use.Upto 2d 10hours it remained exactly the same. Ive just come in from work now, where it should have reached 3d 5hours, but here is the status
Connection Information
Line state:
Connected
Connection time:
0 days, 05:44:10
Downstream:
1.123 Mbps
Upstream:
888.9 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
18.2 dB / 13.0 dB
Line attenuation (Down/Up):
29.0 dB / 17.1 dB
Output power (Down/Up):
18.2 dBm / 12.0 dBm
FEC Events (Down/Up):
429 / 0
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
0 / 0
Error Seconds (Local/Remote):
20 / 0
It looks like it has resynced, and the upstream nosie margin has reduced, and the upstream speed improved. The downstream though is exactly the same. I really cant wait another 3 days again, as ive now been without usable internet for 7 days already, and i will probably need it for work this weekend.
So what do i do next? -
I just hooked up a new HP C3100 printer to my Mac Mini G4 1.25, 512 RAM. The printer is working fine, but my mini now runs at about 1/4 the speed it was before. Everything has slowed down. Is it some of the extra HP software, like HP device manager and HP Photosmart studio that got loaded from the printer's install disc? Can I fix this?
Jake Stickelmeyer-
Those programs don't usually play nice.
Try the uninstaller as Boece mentioned.
Luck-
-DaddyPaycheck -
Slow speed after engineer visit
I joined BT broadband from AOL. With aol I had an average speed of 2.5 meg, which is fine for me. Move to BT and since the arrival of the bt home hub have had a download speed of 0.000 . I am not kidding.
After 3 weeks get an engeneer out who yesterday fixed the problem, saying something about cables, and that the one thousand errors (not kidding again) had now been resolved.
Wake up this morning. Issue returns. It has taken me 20 minutes to load the BT web page. I have tried BT help, who after ordering me to restart my router...even when I protested..and seamed to preach about my distance from the exchange, I have given up phoning them for them not to understand I had an engeneer out yesterday and yesterday issue was resolved only to return again.
Hub Stats
1. Product name:
BT Home Hub
2. Serial number:
+068340+NQ31820319
3. Firmware version:
Software version 4.7.5.1.83.8.130.1.10 (Type A) Last updated 25/07/13
4. Board version:
BT Hub 4A
5. ADSL uptime:
0 days, 00:26:30
6. Bandwidth:
448 / 6336
7. Data sent/received:
7.8 MB / 17.7 MB
8. Broadband username:
[email protected]
9. BT FON:
Yes
10. 2.4 GHz Wireless network/SSID:
BTHub4-7WH2
11. 2.4 GHz Wireless connections:
Enabled (802.11 b/g/n (Recommended)) 20 MHz, WPS enabled
12. 2.4 GHz Wireless security:
WPA and WPA2
13. 2.4 GHz Wireless channel:
Automatic / 11
14. 5 GHz Wireless network/SSID:
BTHub4-7WH2
15. 5 GHz Wireless connections:
Enabled (802.11 n 40 MHz (Recommended)) 20/40 MHz, WPS enabled
16. 5 GHz Wireless security:
WPA2
17. 5 GHz Wireless channel:
Automatic / 40
18. Firewall:
Default
19. MAC Address:
cc:33:bb:00:6b:3a
20. VPI/VCI:
0 / 38
21. Modulation:
G.992.1 Annex A
22. Latency type:
Interleaved
23. Software variant:
24. Boot loader:
As you can see my router is getting speed...but I am getting pages and pages of packet errors. I know I have not been online that long..due to a stupid reset ordered from BT support... but yesterday the BT whole sale test had my speed at 3 meg... am now at the following
my speed now is the above, it varies from this then drops all the way down to 0.00.
I am using the test socket
Filters are new
I only have one phone line
I do not have any devices causing any Rein on the premises
Phone line is used for nothing other than my broadband.
How do I get past dealing with the twenty same questions when I phone BT. The engeneer yesterday was here for three hours and said he would add a note on my file..but when I phone BT I get the usual 'do a speed test..reset your router...blah de blah you're some distance from the exchange...are you using wireless or wired.'Hi Lisagibbins1982
Thanks for your post and sorry about the problems with your broadband speed. If you drop me in an email we'll be happy to help. Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thanks
Neil
BT Forum Mod
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Hi, we had trouble with our phone /BB and vision which were down for about ten days. fault was found to be the line between pole and the main socket into the house, The; B.T engineer replaced the line and socket; which sorted out the phone, but internet was still down. BB was showing as connected, but would not connect to internet and no BT vision service. Phoned BT and Indian lady guided me through different settings and after about half an hour we managed to get the hub to connect to the internet. The speed is very slow now and this is affecting our BT vision as well. I realise that it can take up to ten days for the line to reset to its best setting. can anybody help with the info obtained from our HH1.5 which is wired by ethernet cable to the computer with nothing else connected or running at time of speed test. Original BT speed test result: BT Speed test.08/06/2011 --2am Test1 comprises of two tests 1. Best Effort Test: -provides background information. Download Speed 5751 Kbps 0 Kbps 7150 Kbps Max Achievable Speed Download speedachieved during the test was - 5751 Kbps For your connection, the acceptable range of speedsis 2000-7150 Kbps. Additional Information: Your DSL Connection Rate :7136 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM) IP Profile for your line is - 6295 Kbps ==================================Latest Hub info shows: DSL Connection Link Information Uptime: 1 day, 10:57:05 Modulation: G.992.5 annex A Bandwidth (Up/Down) [kbps/kbps]: 1,119 / 1,148 Data Transferred (Sent/Received) [MB/MB]: 156.79 / 993.94 ========================================================================= DSL Connection Link Information Uptime: 1 day, 10:58:21 Modulation: G.992.5 annex A Bandwidth (Up/Down) [kbps/kbps]: 1,119 / 1,148 Data Transferred (Sent/Received) [MB/MB]: 156.80 / 993.94 Output Power (Up/Down) [dBm]: 12.5 / 0.0 Line Attenuation (Up/Down) [dB]: 13.5 / 24.0 SN Margin (Up/Down) [dB]: 9.0 / 31.5 Vendor ID (Local/Remote): TMMB / IFTN Loss of Framing (Local/Remote): 0 / 0 Loss of Signal (Local/Remote): 2 / 0 Loss of Power (Local/Remote): 0 / 0 Loss of Link (Remote): 0 Error Seconds (Local/Remote): 2 / 0 FEC Errors (Up/Down): 0 / 171 CRC Errors (Up/Down): 0 / 0 HEC Errors (Up/Down): 0 / 0 Line Profile: Fast Are these in line with what might be expected and should my profile return to the original settings?
you have now been upgraded to 21CN adsl2+. Your noise margin is very high but there is a 10 day training period after an upgrade so just leave it connected with no manual resets.
21CN is more aggressive if you have any noise on your line and what was a good connection with adslmax may not initially be a good connection with 21CN. However if you have a noise problem after training come back and someone will provide assistance
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Slower speeds after 21cn "upgrade"
last saturday my internet went out (flashing orange light) and after 3 days they traced the fault to the fact that they were actually upgrading our exchange MRLOW lower peover to 21cn and i was told that when it all came back on i would be on 21cn broadband and my speeds would be alot faster than i was getting now so i was happy to wait. after 5days it came back on but my speeds are actually worse than before the upgrade. before i was synced at 2mb. could i get switched to the new and improved 21cn speeds please?
i was also told that after 3days of no broadband you can get that months broadband cost refunded as compensation, can i get that actioned too please?
Download speedachieved during the test was - 0.11 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-1 Mbps.
Additional Information:
Your DSL Connection Rate :1.15 Mbps(DOWN-STREAM), 0.29 Mbps(UP-STREAM)
IP Profile for your line is - 1 Mbps
Line state:
Connectedppp0_0
Connection time:
3 days, 23:43:01
Downstream:
1.125 Mbps
Upstream:
288 Kbps
Solved!
Go to Solution.you can see from the checker results the adsl2 increase is minimal if at all. what's worse is if you had stability problems with adslmax then 21Cn will not help and may even make matters worse as it is far more aggressive on any line noise
looks like the fixed 2mb connection may still be best for you
as you appear to have dropped to a fixed 1mb connection I have asked mods to help and they will post a contact us link on reading this
After completing the email NOT PM then you join a queue of other customers waiting for mod help. The mods will get back to you in 3/5 working days either by phone or email
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Hi all,
Had a fault on my broadband line for a few months .. random disconnections and poor speed until finally my broadband speed fell through the floor. After a few phone calls to the helpdesk they indentified a fault in the network. One month later and the underground line running down the road is now replaced and all seems good. However the speed on my broadband line hasn't started to recover yet .. 6 days so far ..
ADSL Link
Downstream
Upstream
Connection Speed
283 kbps
888 kbps
Line Attenuation
41.0 db
19.8 db
Noise Margin
30.4 db
10.8 db
Download speedachieved during the test was - 0.22 Mbps
For your connection, the acceptable range of speeds is 0.1 Mbps-0.25 Mbps.
IP Profile for your line is - 0.25 Mbps
Upload speed achieved during the test was - 0.6Mbps
Additional Information:
Upstream Rate IP profile on your line is - 0.83 Mbps
Based on the attenuation and noise margin I think I should be able to achieve around about 6Mbs which is slightly slower than before the fault occured but the IP profile seems to be stuck at 0.25Mbs.
Is it worth waiting longer to see if it improves or do I need to get the IP profile reset and start the 10day training process in motion?
cheers
ElsThis link should also help to explain it.
Why has my speed dropped
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
How many people are experiencing a major slow down and internet loss after the latest AirPort update. I've been having a lot of trouble. Also does anyone know how to fix it?
Ok, found a solution that may work. I found an application called appzapper. You can find it in mac os x/downloads here on the apple site. it is shareware but you get 5 free zaps, so good enough. download the program and then find the update package /library/receipts/airport20060001.pkg. drag the package onto appzapper. Bang no more update(at leat i think) I had to restart and when i did i had my full 54mb connectivity and i could again find my g5 on the network for file sharing. hope this helps.
-
Slower speed after engineer visit
After losing my broadband connection last week an overreach engineer came out today and found that an ant infestation further down the road had disconnected the cables! My connection speed is now only 1mbs when previously it was 4.5. Should I expect to see thIs increase fairly quickly in the 10 day period or will it take a while?
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
0 day, 00:29:44
Downstream:
1,150 Kbps
Upstream:
440 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
11.7 dB / 17.2 dB
Line attenuation (Down/Up):
58.0 dB / 34.2 dB
Output power (Down/Up):
0.0 dBm / 12.7 dBm
FEC Events (Down/Up):
197 / 63
CRC Events (Down/Up):
0 / 0
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
0 / 0
Error Seconds (Local/Remote):
0 / 0
BT Speed Test gives my connection speed as 1.2mbps and estimated speed as 3.5mbps (I was getting 4.5mbps before the engineer fixed the connection issue)
I am connected to a spur off the master which is about 4 meters away and when I have connected directly to the test port I get the same result.
I have also tried the quite line and hear nothing.
Thanks :-) -
Slow speed after software update
my system is slow after the last software update. I don't know what software I currently have. not tech savvy. just want my mac back
Hello,
Savvy or not, it's important to keep track of what you do on your computer in the event that something doesn't behave properly and you need to reverse it. This software update you ran, was it the Apple Software Update? Do you at least know version of OS X you're running? Based on what version of OS X you're running there are differents way to see what was recently installed/updated but as a baseline it's important to know if you're running OS X 10.5, 10.6, 10.7 or 10.8 on the machine. -
Slow cpu after new SEcurity UPdate
i installed the newest security update on friday and ever since then my mini has been giving me heck. spinning beachballs abound. almost every app has a distinguished pause before loading. safari is definitely slower at handling incoming images, text, whatever. oh yeah the biggest pauses seem to occur when a program attempts to access a folder on my hard drive.
anybody else experiencing these problems?
any possible fixes? (please do not say repair disks)
any way of taking away this security update? -truthfully i would rather have a well functioning computer than be "secure"-I am also seeing this, with initial onset of symptoms correlating with installing the latest security update. Boot goes quickly until it gets to "Login window starting", whereupon it stays there for over 2 minutes. It takes 30 seconds to open a finder on the drive and another 30 seconds for that window to display its contents. Switching focus between applications and pulling down menus takes seconds, though the application processing itself appears zippy.
iostat reports the cpu remaining about 98% idle and little disk activity.
This suggests to me that there is some problem in either the window manager or its communication with applications.
Maybe you are looking for
-
Cant use iclound due to error message. saying i have more than one version of outlook
need help as all i want to do is sync all my calenders at work PC microsoft. too all of my devises ipad iphone etc.
-
How to implement a java class in my form .
Hi All , I'm trying to create a Button or a Bean Area Item and Implement a class to it on the ( IMPLEMENTATION CLASS ) property such as ( oracle.forms.demos.RoundedButton ) class . but it doesn't work ... please tell me how to implement such a class
-
I am using Mac Mail on Mac Air with 10.10. I have a multi line signature but it looks double spaced and I can't get it to look like a single spaced signature. I tried different fonts and sizes. Appreciate your assistance. Fran
-
Inbound IDoc(HRMD_A07) problem in delimiting the infotype records
Hi All, I am using Inbound IDoc (HRMD_A07) approach to update infotypes. I found that I am able to create a record in an infotype, but there is a problem in delimiting the infotype. Please help me out in case I am missing something. Thanks, ABAP_DEV
-
RealPlayer for Mac OS X 10.1.0.503 - Incompatible???
I understand that in the past there were some incompatibility issues between RealPlayer and Intel Core 2 Duo Macs. Presumably these problems were corrected in version 10.1.0.503 (latest) of RealPlayer. However, today I reinstalled the latest version