Slow speed after software update

my system is slow after the last software update. I don't know what software I currently have. not tech savvy. just want my mac back

Hello,
Savvy or not, it's important to keep track of what you do on your computer in the event that something doesn't behave properly and you need to reverse it. This software update you ran, was it the Apple Software Update? Do you at least know version of OS X you're running? Based on what version of OS X you're running there are differents way to see what was recently installed/updated but as a baseline it's important to know if you're running OS X 10.5, 10.6, 10.7 or 10.8 on the machine.

Similar Messages

  • SLOW speeds after sw update - Novatel 4G LTE router with voice

    My device auto-updated to sw 2.0 and ever since am getting 1-3 Mbps up/down. Prior to the sw update, I was getting "normal" LTE speeds ranging from 15-25 Mbps up/down.
    Verizon processed a replacement (was brand new, swapped in-store) with same experience. Speeds were normal but after a few minutes of being powered on, the router auto-updates to 2.0 and slow speeds thereafter.
    Phone front line has been nice but since this device is so new hoping posting here with get the attention of someone to correct this issue. Swapping for replacement devices isn't solving the problem.
    Anyone else? Ideas for a fix?

    Ok, I just followed JoeL and am awaiting approval. For reference, see the image of 3 speed tests this morning conducted on an LTE iPad. No other devices are connected to the router.
    connected to the wireless network broadcast by the Verizon 4G LTE router - 0.6 down/up, unacceptable
    connected straight to the Verizon LTE network - 34 down / 9 up, fine
    home wireless network
    The 1st test should look very similar to the 2nd since both are using the Verizon LTE network

  • Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

    Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Problem restarting after software update

    Computer is fine, drive 40% full, no speed problems...
    But it just won't restart after software update runs, nor will it restart or shut down from finder.
    Problem solving so far: Safe boot, reset pram, ran disk utility, ran disk repair using install disk, ran fsck -y, ran disk warrior.
    Is annoying. ANy ideas anyone? If not, what is the procedure for updating using sudate and terminal, as when I use software update, a force shut down will not install.
    ANy ideas folks?

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Ipod touch4g  is not detected in pc and itunes after software update

    after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

    iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
    I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
    EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
    I don't have Apple Care, what to do? Spend more money and buy a new phone?

    Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
    I myself, two days ago purchased a  2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
    I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
    Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
    Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
    SHAME ON YOU!

  • Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

    Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

    Try PRAM reset.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

  • HT1338 iphone 3gs cant be activated after software update to ios5

    iphone 3gs cant be activated after software update to ios5

    What does it say when you look at Settings=>General=>About=>Carrier?
    Which version of Cydia is on your iPhone - the one with the black & white
    icon or another one? What color is the Cydia icon?

  • Internal camera failure after software updates...first skype couldn't......

    Hello!
    I am having internal camera failure after software updates...first skype couldn't find the camera, and now photo booth also says camera is not connected. Its a brand new MacBook Pro which has been working fine for a month, but after a software update (the blinking message said i had 13 new things to update...you know what I'm talking about right?) all of a sudden Skype couldnt find a camera, so i went to the skype community and tried some things (like trashing skype) but now photo booth says no camera detected, which is weird cause the camera is built into the computer..
    Please help!
    Thanks
    O

    First, reset the SMC:
    http://support.apple.com/kb/HT3964
    If that doesn't help, then take it to an Apple Store for examination.

  • Post Moved Slow-speeds-after-6-months

    M oved to Infinity board http://community.bt.com/t5/BT-Infinity/Slow-speeds-after-6-months/td-p/767428
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

    Hi Ryant, the test test says i should contact my isp, so i`ll give BT a ring. Cheers.

  • Problem in curve 9320 after software update

    Hi, i had updated my curve 9320 with new software as recommended by blackberry desktop software. After the update i am facing many issues after software update:
    1. whenever I am trying to make a call or opening any message my phone power suddenly goes OFF and not starting till I pullback the battery and re-inserted.
    2. Some time automatically its battery got heated up and there is discharge of battery, but when i pull back and re-inserted battery it becomes normal.
    3. Email setup is not working, I am not able to add any email account. whenever I am clicking on email setup there is no reaction.
    please suggest what to do. I tried to go back to download old software but I am not able to get it anywhere online.
    regards
    iftekhar

    Hey iftekhar,
    Welcome to the BlackBerry® Support Community Forums.
    I would suggest backing up doing a clean reload of the BlackBerry® device software as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320. Please test before restoring any data to the device.
    If this resolves the issue do a selective restore of essential data (Address Book, Calendar, Task, Memos, BBM contacts etc.)
    How to use BlackBerry® Desktop Software to restore data to a BlackBerry® smartphone from a backup file
    http://btsc.webapps.blackberry.com/btsc/KB10339.
    If the issue still persists after the reload, further investigation might be required. To help further diagnose the cause, contact your wireless service provider or BlackBerry® Technical Support Services for further review and support.
    Thank you.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • My computer couldn't find my playbook anymore after software update!!!

    After software updated to 1.0.7.3312, my computer couldn't find my playbook anymore.
    First couple time it could find normally as like before, few times later it could not anymore!!! LOL.
    I tried connect to the other PC either in my office and home several times, exactly same happen again.
    Anybody got same problem that I have? Please advice me.
    My computers have Window7, 32bit.

    Please review the knowledge base articles here:
    Article ID: KB27424 Identifying and troubleshooting issues with the BlackBerry Desktop Software detecting a USB connected BlackBerry PlayBook
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Arabic language disappeared after software updater...

    Yesterday night I decided to update my mobile software using nokia software updater to solve a performance issue as mentioned in the website.
    I took a full back on my MMC then started the update.
    My mobile software version was 1.00.XXXXX and the new release is 4.XXXXXX
    The update completed successfully, but after I restarted the mobile I was shoked of the following issues :
    - The arabic language disappeared from the phone lagnauge selection.
    - MMC requested a passrowd to ulock it !!! while I dont remember that I set a password for it or I may set it once long time back but I forgot it now.
    I'm surprized for what happened as I had a discussion last night with my father regarding Nokia trust relation ship .
    Please advice how can I solve my issues ASAP.
    All my contacts are backed up on the memmory .

    read this :
    /t5/Software-Updates/Language-changed-or-missing-after-software-update-sticky/td-p/265903
    -you can show appreciation to my posts if it helped or useful by pressing the green Kudo star beside my post that hepled
    -if my answer was the solution , so click accept as solution button
    Started From Nokia 3310 , Now with Nokia N97 v.22.0.110 + N900 PR1.2

  • Missing Apps after software update

    how  can i move apps to iphone after software update?

    Connect to itunes, make sure that under the apps tab that apps are checked to sync, then click sync at the bottom.

Maybe you are looking for