Slow speed with Firefox when I upgraded my broadband from 6-8 Mb to 12-24 Mb. Not with InternetExplorer.
I have FF 18 on my computer. With IE it is no problem.
With FF speed catch 4,74 and send 1,76.
With IE speed catch 17,67 and send 4,67.
hello janlun, are you using speedtest.net or a similar flash-based site to measure your connection speed? then it might be an issue with the protected mode that [http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html adobe has introduced] for its flash plugin for firefox. some old versions of f-secure or trusteer rapport are known to cause such slowdowns together with flash, or it might be something similar on your system that is interfering (maybe security software that is blocking/sandboxing the container used for the protected mode, etc...).
as a workaround you could try [https://support.mozilla.org/en-US/kb/flash-113-crashes#w_solution-2-downgrade-to-flash-10-3 downgrading to flash 10.3] (which is still supported) or [http://forums.adobe.com/thread/1018071#TemporaryWorkaround disabling protected mode] & see if this makes a difference.
in case you'd like to troubleshoot the issue further, it would be best to contact adobe's support & file a bug report at bugbase.adobe.com (choose "Adobe Flash Player" as the product & "Browser Integration" as the product area), since they will have a better understanding of the internals of flash protected mode & therefore may know what else might be at the root of the problem you were seeing.
Similar Messages
-
My podcast app started playing all unplayed episodes at slightly slower speed with everything doubled. How do I return it to normal play?
When you're listening to a podcast, slide the current artwork up from the bottom, and you will reveal the control panel. Adjust the little switch in the middle so that it is pointing North, instead of Northwest. That will fix your problem.
-
I received a message to upgrade my Firefox , when I upgraded to Firefox 6.0.2 it says (The proxy server is refusing connections .)
I had a copy of Firefox 3.5.5, which works fine.Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
If you do not need to use a proxy to connect to internet then select "No Proxy" if the default "Use the system proxy settings" setting doesn't work.
See "Firefox connection settings":
*https://support.mozilla.com/kb/Firefox+cannot+load+websites+but+other+programs+can
Please update Firefox to the latest version via "Help > Check for Updates or Help > About Firefox"<br />
The Firefox 3.5.5 version that you use is no longer maintained with security and stability updates.<br />
Using unsupported Firefox versions is at your own risk and makes you vulnerable to attacks.<br />
Users of no longer supported Firefox versions are strongly recommended to update to the latest release that is supported by their system.
*Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*http://en.wikipedia.org/wiki/Vulnerability_(computing)
*http://www.mozilla.org/security/known-vulnerabilities/ -
E3200 - Dramatically slowing speed with a switch behind...
I changed my old Linksys router with a new e3200 with gigabit eth-ports.
When i directly connect to the router (ethernet) i get the right speed. (speedtest @ 98Mbits)
But the crazy thing when i put a switch (non gigabit) on my router and connect my pc to the switch
i get a really bad connection. (speedtest @ 18Mbits).
Tested different times and still this slow speed..
When i connect the pc directly to my router i get the right speed again.
I tried everything but cannot find a way to fix it.
In my old sitation i got the right speed. That was also a linksys, but older model and non gigabit.
The only last thing i think:
maybe a conflict between gigabit(e3200 router) and the non gigabit(switch).??Thank you for you response!
I didnt change anything and before my new E3200 router everything worked OK.
I was getting speeds round 100 MB/S on speedtest.net
But saturday i switched the old switch (non gigabit) with a New Gigabit switch (Sitecome).
And now everything is back to 100 MB/S.
So conclusion:
Dont use a non gigabit switch with the E3200. Cause it wil conflict.
I tested 3 differtent non gigabit switches and all gave me lower speed. With my Fiber connection and saw immediately the problem.
People who normaly not get speeds above 20MB/S on internet, dont sees the problem. -
I purchased PDF printer before upgrading my iPad software, but when I upgraded the software and searched in the purchased applications, I did not find it. How can I restore it?
Flamingo50 wrote:
I have an iPad (1) can you not upgrade the software to anything higher than 5.1.1?
Correct. The iPad 1 can only go as far as iOS 5.1.1 -
have i-phone 3gs purchased unlocked from usa 2 years back version 4.1 recently when i upgrade my version using i-tunes to 6.o I can not activate my i-phone , the msg server busy since last week I not understand what is the problem ?
The 3GS was not sold as an unlocked phone in the US 2 years ago and AT&T did not offer unlocking then.
You bought a hacked phone. The Apple servers can detect the hack and have now disabled activation. Contact AT&T and find out if you qualify to have it unlocked or buy a new legitimately unlocked phone. -
I have an iphone 4, when I upgraded to ios 7.1.1 the application 'superlive pro' is not functioning well it is stucked and some times the device needs to be restarted
if there is a compatability between the app and newer versions of the ios then likely the developer if he/she knows about it will release an update fixing the issue
but of cause the developer has to know about it so maybe you should inform the developer about the issue and wait for a fix -
I cant download from appstore. I made my apple Id but when I try to download from app store it says this id has not yet been used in itunes. what should I do?
Follow the on screen instructions to set up an iTunes account using your Apple ID.
-
Slow speed/high SNR margin after upgrade to ADSL2+...
I have an issue with slow speed that I am suspecting is caused by a high SNR margin (about 12dB) which has come about (I believe) due to the fact that my router was repeatedly reset during the first few days of the upgraded service. The exchange was upgraded to ADSL2+ on 3rd January.
I have a US Robotics 9108 which has worked fine for nearly six years. I was getting around 8Mbps before the upgrade which isn't far off the theoretical maximum.
There was a problem with my router and I only found it to be my router at fault over the last few days. Upgrading its firmware has cured the problem which was that requests weren't being fulfilled once connection had been established, (seemingly particularly when this was ADSL2+ or ADSL2 mode). Consequently, I reset my router in these instances and I believe that this will have been interpretted by the exchange as being due to line noise. In general, I disabled ADSL2 and 2+ modes on my router to force it back to G.DMT and it usually worked fine (albeit slow sync rate relative to that I had before 3rd January).
During fault conditions, the connection synced OK. I recently borrowed a router and tried it and it immediately connected faster than mine had done previously and I could access the web without issue. This confirmed that my US Robotics was at fault, and after downloading its latest firmware, it fixed the problem.
There is no bell wire as there are no hard wired extensions from the master socket. I use a single filter which plugs directly into the master socket (i.e. no extension lead to the filter).
I was using a BT filter (MF50) I got in 2004 when I first got broadband. This came with a Voyager 100 modem and is a rebranded YCL one. I have since replaced this with a Z350-UK which I have borrowed. The US Robotics didn't come with any filters.
With the BT filter, caller display does not work at all when the router is connected in ADSL2 mode. In G.DMT mode the problem with caller display was intermittent. The Z350-UK has rectified the problem with caller display not working when in ADSL2 mode. I have ordered a Pressac Interstitial VDSL Faceplate as a perminant solution.
Do I need to contact the support helpline to get this fixed? Or will the SNR margin drop over time? As I say, I got around 8Mbps before the upgrade.
I am presently connected in 2+ mode and stats are:
SNR margin (dB):
12.8
5.4
Attenuation (dB):
34.0
12.0
Output power (dBm):
0.0
12.8
Attainable rate (Kbps):
8984
1144
Rate (Kbps):
6495
1144
I have just run the BT Speed Test and the results are:
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
5282 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 5282 Kbps
For your connection, the acceptable range of speeds is 2000-7150 Kbps.
Additional Information:
Your DSL Connection Rate :6495 Kbps(DOWN-STREAM), 1144 Kbps(UP-STREAM)
IP Profile for your line is - 5730 Kbps
2. Upstream Test: -provides background information.
Upload Speed
938 Kbps
0 Kbps
1144 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 938 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1144 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.once you have maintained 3 days + stable connection then you can contact the forum mods on this link and request a noise margin reset http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 72 hours
you do not need to contact the helpline
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Slow speeds with roaming network
I just got a new HTC One M8 which has the wireless AC capability. I am getting really slow speeds on my home network and hoping someone can help.
My current setup is as follows - a motorola surfboard modem hooked up (ethernet) to the new model Airport Extreme (with the AC), from there I have a powerline adapter hooked up to another part of the house where I have the older model Airport Extreme (I think 5th gen) - and I am using this in roaming mode to extend the signal.
This works fantastic for my devices which run on N, and everything flies with little to no issues no matter where I am in the house. But this phone - it is incredibly slow. When I run speed tests, at times I am getting decent download on the phone (20mbs) but getting absolutely 0 upload (literally 0.0 mbs). It works from time to time but is cutting in and out frequently.. So - What I am wondering is, would the fact that the router downstairs broadcasting an AC signal conflict with the upstairs broadcasting an N? I am wondering if the phone is constantly switching from one band to another and causing my speed issues? I tried the wifi on another network which just had an N signal, and had no issues whatsoever so I know it is something to do with my home network.
Again - I don't have this issue with any of my other devices (iphone 5, laptop, Ipad etc) so I don't believe the issue lies with my ISP, just looking for advice or if anyone knows if this setup would cause issues with AC devices? I like having the 2nd router upstairs as it really boosts the signal for my N devices and also gives me the ability to hard wire the PS4, xbox etc - so I definitely want to keep it setup - but am thinking I might need to set it up as a new network and turn off the roaming.. Thoughts? Thanks in advance.i'd tweak it and think you're making it worse by having 2 different networks, both your routers are very capable dual mode so you should let the router and the devices decide which band to use (2 vs 5) vs your choosing it for them
once your network is setup correctly, restart any stationary clients ensuring that they are grabbing the strongest signal present
keep flatex downstairs, factory reset it and create a new network, trust me you'll want to factory reset to avoid issues when setting up the towerex
for now, put towerex next to flatex, factory reset it, and connect an eth cable from LAN on flatex to WAN (circle icon) on towerex
give it a minute or 2, open airport utility and you'll get the option to setup towerex as a WIRED extension, do this
now the painful part, play around with different set of electrical outlets to find the ones that give your towerex the best connection
remember, to turn the wifi on/off for the device you're using to test the towerex after each move or it will likely be connected to the flatex -
2.4GHZ clients very slow speeds with AP3600
5508 WLC (7.5.102)
AP36021
We currently have a test WiFi SSID setup that uses basic mac filtering on our WLC's
WLAN is configured with WPA and WPA2 L2 Security with WPA Policy and WPA2 Encryption.
For some reason we seem to be getting very slow speeds on clients with 2.4GHZ
for example speedtest.net I get 70mg upload and 65mg download on 5GHZ devices and about 1-3mg download and 1mg upload for 2.4GZ devices!
AP36021 are dual band with 4 channels (2 x 2.4Ghz and 2 x 5Ghz)
fyi - There are no dropped packets on the client stats via Prime mgmt that use 2.4GHZ
Any ideas here?Foreign Primary WLC (let me know if you need the Anchor controller ouput as well)
We have 3 ports configured as 0/12 trunked
interface GigabitEthernet0/12
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
load-interval 30
no cdp enable
channel-group 3 mode on
spanning-tree portfast
end
Building configuration...
Current configuration : 330 bytes
interface Port-channel3
description + WLC ****
switchport access vlan 999
switchport trunk encapsulation dot1q
switchport trunk native vlan 999
switchport trunk allowed vlan 10,30,40
switchport mode trunk
switchport nonegotiate
logging event trunk-status
logging event bundle-status
load-interval 30
end
AP switch port config
Building configuration...
Current configuration : 617 bytes
interface GigabitEthernet4/32
description AP36021
switchport
switchport access vlan 30
switchport mode access
switchport voice vlan 20
load-interval 30
speed auto 10 100
wrr-queue bandwidth 5 90 5
wrr-queue queue-limit 5 80 5
wrr-queue random-detect min-threshold 2 70 100 100 100 100 100 100 100
wrr-queue random-detect min-threshold 3 70 100 100 100 100 100 100 100
wrr-queue random-detect max-threshold 2 100 100 100 100 100 100 100 100
wrr-queue cos-map 2 1 0 1 2 4
wrr-queue cos-map 3 1 3 6 7
no snmp trap link-status
mls qos trust cos
no mdix auto
spanning-tree portfast
end
show wlan 4
WLAN Identifier.................................. 4
Profile Name..................................... WLKPV
Network Name (SSID).............................. WLKPV
Status........................................... Enabled
MAC Filtering.................................... Enabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
Client Profiling Status
Radius Profiling ............................ Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Local Profiling ............................. Disabled
DHCP ....................................... Disabled
HTTP ....................................... Disabled
Radius-NAC State............................... Disabled
SNMP-NAC State................................. Disabled
Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
--More-- or (q)uit
Number of Active Clients......................... 21
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 7200 seconds
User Idle Timeout................................ Disabled
Sleep Client..................................... disable
Sleep Client Timeout............................. 12 hours
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... hellotest
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ new-byod
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
WLAN Layer2 ACL.................................. unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
PMIPv6 Mobility Type............................. none
PMIPv6 MAG Profile........................... Unconfigured
PMIPv6 Default Realm......................... Unconfigured
--More-- or (q)uit
PMIPv6 NAI Type.............................. Hexadecimal
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Per-Client Rate Limits........................... Upstream Downstream
Average Data Rate................................ 0 0
Average Realtime Data Rate....................... 0 0
Burst Data Rate.................................. 0 0
Burst Realtime Data Rate......................... 0 0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
--More-- or (q)uit
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Global Servers
Accounting.................................... Global Servers
Interim Update............................. Disabled
Framed IPv6 Acct AVP ...................... Prefix
Dynamic Interface............................. Disabled
Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
FT Support.................................... Disabled
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Disabled
AES Cipher.............................. Enabled
--More-- or (q)uit
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT-1X(802.11r).......................... Disabled
FT-PSK(802.11r)......................... Disabled
PMF-1X(802.11w)......................... Disabled
PMF-PSK(802.11w)........................ Disabled
FT Reassociation Timeout................... 20
FT Over-The-DS mode........................ Enabled
GTK Randomization.......................... Disabled
SKC Cache Support.......................... Disabled
CCKM TSF Tolerance......................... 1000
WAPI.......................................... Disabled
Wi-Fi Direct policy configured................ Disabled
EAP-Passthrough............................... Disabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Enabled
FlexConnect Local Switching................... Disabled
--More-- or (q)uit
flexconnect Central Dhcp Flag................. Disabled
flexconnect nat-pat Flag...................... Disabled
flexconnect Dns Override Flag................. Disabled
flexconnect PPPoE pass-through................ Disabled
flexconnect local-switching IP-source-guar.... Disabled
FlexConnect Vlan based Central Switching ..... Disabled
FlexConnect Local Authentication.............. Disabled
FlexConnect Learn IP Address.................. Enabled
Client MFP.................................... Optional
PMF........................................... Disabled
PMF Association Comeback Time................. 1
PMF SA Query RetryTimeout..................... 200
Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
AVC Profile Name................................. None
Flow Monitor Name................................ None
Split Tunnel (Printers).......................... Disabled
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
--More-- or (q)uit
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID IP Address Status
4 10.x.x.x Up
4 10.x.x.x Up
802.11u........................................ Disabled
MSAP Services.................................. Disabled -
Mac mini slow speed - with pauses
My Mac Mini crashed and I had to reinstall.
Now it runs partly very slow, even with pauses, where I have to wait for responses.
Start-up takes long minutes.
System profiling tools says HD activity reaches a max of 8MB/s.
CPU workload looks far below 100%.
Is there any experience with this?
How can I check and find out more precise the reason for slowing down?
Mac Mini: 4GB 1067 MHz DDR3 RAM, 500 GB HD, 2,66 GHz Intel Core 2 Duo, OS X 10.7.2 everything updatedAs per the reply to your other post with the same question:
This is not something to worry about or be concerned with. Firstly, the paging counts will depend on how long the system has been running since the last boot, but MacOS is designed to actively page out and in, so in itself, the fact your system shows it is doing so means nothing at all.
If your computer is exhibiting some indication of a problem, I suggest you start a new thread here and describe what you are experiencing. That way we can help you directly with the specifics of your problem. On the other hand, if you have just seen the comments regarding paging and system performance and have checked your own Mac to see what it's doing - the answer is that in the absence of an indication of a problem, it's very likely doing exactly what it ought to be doing! -
I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report: 2
Anonymous UUID: 2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide: 0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController 320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch 3908
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.2
com.apple.driver.AppleUSBHub 5.2.5
com.apple.driver.AppleFWOHCI 4.9.6
com.apple.driver.AirPort.Atheros40 600.70.23
com.apple.driver.AppleUSBEHCI 5.4.0
com.apple.driver.AppleAHCIPort 2.4.1
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBUHCI 5.2.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.2.5
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.2.5
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOAHCIFamily 2.2.1
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBFamily 5.4.0
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7.2
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/ -
HELP !
After I upgraded my operating system on my mac, (from Snow Leopard (10.6 ? ) to Mountain Lion (10.8.2), virtually ALL of my documents (recipes, update logs, information of untold things), have been denied to me with my Microsoft Word for Mac (which I have used since I purchased my mac in Aug.2008).
I now get a window that tells me "You can't open the application "Microsoft Word" because PowerPC applications are no longer supported." (Needless to say, I cannot use Excel or anything else, either!)
Yet, I can still access them, fully (read and even print fro them), individually, by dragging a file into my PREVIEW program!
What gives?
I am not a savvy programmer, nor do I confess to somehow being warned that this might happen when I upgraded my operating system.
Is there any reasonable (easier?) way to continue the use of these (to me) very important files? I only upgraded because I upgraded my iPhone to a 4S and wanted everything to conform to siimilar circumstances!
What can I DO?You need to upgrade your copy of MS Office. You're using a version that is 8 years old (at least). You can buy Office 2011, which will work. You could also get a copy of Pages from the App Store, which is cheaper and will open Word files (though not perfectly). Or you could get a free Office clone, like OpenOffice or LibreOffice.
-
I've just upgraded to Lion from Snow Leopard and to my surprise it does not support my 'Appleworks' application software. Ihave used Appleworks for all correspondence for six years and need to refer to the files (letters etc.) from time to time. Is my only option to revert back to Snow Leopard?
The reason appleworks no longer runs is because it is a powerpc based application. Since it's end-of-life in 2007, it was never converted to intel architecture, since it was dropped as a supported product. It continued to run on intel machines via rosetta, but OS X Lion formally discontinues all support for powerpc based programs. Powerpc based applications can only be run on OS X 10.6.8 or earlier releases (ones that still support rosetta).
So, it does sound like your best option is to move to iWorks' Pages now - otherwise you will be stuck with an increasingly more outdated operating system. And if you should buy a new machine, it would not run the older versions of OS X anyway, so at some point you have to leave appleworks behind and move on. Seems best to do it now, before Pages perhaps also moves forward to a point where it too may no longer support ancient file formats.
http://www.apple.com/support/appleworks/faq/
Maybe you are looking for
-
Dynamic UIElement Generation at Runtime
Hi everybody, My problem is, that I want to create a number of elements at runtime. The number depends on the records in the database. So when I got 30 records in my database. I want to create 30 elements. So far, so good. The connection through the
-
The cost of ink is rediculas, quit a rackit HP has with thei printers on Windows 8. Maybe after you print a page 6 times, you figure how to work around to print in color. Noting is easy like window 7 was ( set it and forget it). What a mistake buying
-
Pdf link dont work if document open in separate Acrobat window in internet explorer
Hi, We have many pdf with different links between this pdf. The link type is "Open a file". - If the fist pdf document is open from hard drive this links works perfectly. - If the pdf document is open from the web site (http://website/doc1.pdf) and a
-
Unable to perform for-each on quer-database() result
Hi I am using the quer-database function in my XSLT which is returning more than 1 value. when i try assigning these values I am only able to assign the first row of elements. When I try dragging the for-each activity and try using it with the qurey-
-
Retirement of an investement measure
Good day! We are trying to retire an investement measure after a full settlement of an order (KO88), as we don't need it anymore and don't want someone to use the investement measure iteratively. We are using transaction ABAVN to retire the investeme