Slow start up since wire got removed accidentally...imac perform too slow

hi am sajith ...i am facing a slow in start up n using my mac from the time since, the wire got unplug accidentally ...it ws very fast before ..please help me out?

Open Disk Utility (in the Utilities folder of the Application folder). Select your startup volume from the list on the left side & click the "Verify Disk" button. If it finds any problems follow the instructions to restart your computer from another volume (varies by the OS version you are using) & repair the drive.
If & when any errors are fixed, run the Permissions repair.
Note: If you fill in the model & OS version info in your user profile, that will help us provide more detailed advice.

Similar Messages

Since i upgraded to Yosemite, my iMac is too slow

Since i upgraded to Yosemite, my iMac is too slow. For example, at the starting up, it needs minutes 34" to open.
When i open a window / folder, i need between 1 and 2 minutes. By opening a pdf or an other document i uses 2 to 7 minutes.
WHY? How can i change this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have got iphone 3 and its too slow so i would like to exchange is it possible i am ready to add some amount

iphone 3 too slow so want to get iphone4 n ready to add sm money is iy possible

just 10% is jow much i have no idea abt the prices so plz allocate the amount to add to get iphone4 inexchane of iphone3

My G1 Apple TV no longer synchs since I got the latest IMac. What to do?

I recently got the latest IMac. However, I can no longer sync my Apple TV (first generation, either for pics, or for music). The sync menu is very limited and the content is no longer dispalyed on ITunes. How can I solve this, please?

btw , I've cleared cache ,deleted temp files etc.
Screensaver was working on here a couple of wks ago ,now nowt!.
Also , I've had my hard drive saved & I'm running it on here .
Another thing ,I cant access my Picasa files which I thought would be on my hard drive??
Scary thing watching your laptop on fire ,any help with why my screensaver doesnt work would be soothing :)
btw ,the link you give for micrsof help with screensaver is no use to my probs.
Cyndi.x.

BI Server performance too slow

Hi experts,
I am facing an issue, my OBIEE sits on a Unix Platform. And many time the server performance is too slow, when I check the processes, Java under Orabi user is using more than 50% of the CPU utilization. I need to find the root cause behind it, as it is the production system and is affecting many users.
Thanks in advance.
MT

Thanks Prassu,
Yes the Server is performing too much calculations, but they are required as need to cache reports at daily level also,
I have an observation that the MAX_CACHE_ENTRY_SIZE [MAX_CACHE_ENTRY_SIZE = 1 MB;] parameter is set only for 1 MB, I can understand that if any query fetching more data than 1 MB will not be cached. But is there any chance that this will affect the server as well.
Thanks
MT

Performance too Slow on SQL Azure box

Hi,
Performance is too slow on SQL Azure box:
Below query returns 500,000 rows in 18 Min. on SQL Azure box (connected via SSMS)
SELECT * FROM TABLE_1
Whereas, on local server it returns 500,000 rows in (30 sec.)
SQL Azure configuration:
Service Tier/Performance Level : Premium/P1
DTU       : 100
MAX DB Size : 500GB
Max Worker Threads : 200
Max Sessions     : 2400
Benchmark Transaction Rate      : 105 transactions per second
Predictability : Best
Thanks,

Hello,
Please refer to the following document too:
http://download.microsoft.com/download/D/2/0/D20E1C5F-72EA-4505-9F26-FEF9550EFD44/Performance%20Guidance%20for%20SQL%20Server%20in%20Windows%20Azure%20Virtual%20Machines.docx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How can I remove Lion? Since the upgrade, my 2011 iMac is painfully slow :(

Any help is sincerely appreciated. My iMac is my primary computer at work and is slowing me down. It ran Snow Leopard beautifully, but it just can't handle Lion. It's a 2011 27 inch model.
Cheers
Jeremy

I updated last week and have had severely degraded performance ever since. It takes around 15 seconds to load launch pad, then even longer for the app icons to appear. If iTunes is playing, playback stutters constantly and it takes a long time for the next song to come on. It's a new machine so there's not much to index, I only have 1 folder with some photoshop files and an iTunes music folder. The only non-standard software I have is Microsoft Office 2008 and Adobe Photoshop CS5.

Slow Start-Up Since Upgrading to Yosemite

Since upgrading to OS X 10.10 I have noticed a much long start-up period. OK so what's a couple of minutes? Well, with previous OS iterations start-up was quicker.
Our equipment:
1. A late 2011 15" MacBook Pro (500GB HD -- 275GB free -- and 4GB RAM)
2. A late 2012 27" iMac (1TB HD -- 330GB free -- and 8GB RAM)
Overall, I am also noticing the spinning beachball on both machines far more than with Mavericks as I wait to open new Pages files, launch applications or even open an e-mail. The ball was even spinning when I clicked on About this Mac.
If I need to perform any disk-related maintenance actions on both machines I'd be very pleased to get the instructions or to hear what anyone else has done to speed things up.
Many thanks.
Simon

Slow performance after installing Yosemite on an older Mac is often caused by inadequate memory. Although you can install the upgrade on a Mac with 2 GB of memory, experience has shown that at least 4 GB is needed for full performance.
Select About This Mac from the Apple menu. If you have less than 4 GB of memory, and your model has upgradable memory, install as much as it can take, or at least that much. Any reputable RAM vendor will have a web form in which you can select the Mac model and be directed to compatible parts.

IMac suddenly too slow to open vital apps, web pages

This started sometime in the last week or two. My iMac, which until now has always run smoothly, will now get the rotating beach balls when trying to open my Pro Tools sessions and other apps I need for work. I've tried many of the generally suggested remedies from others with similar problems, i.e. safe mode reboot, repair permissions, verify disk, clear cache files, clear up some HD space, etc. I suspect a third-party app I downloaded somewhere along the line is the culprit but for the life of me I cannot figure this out. Starting to get very frustrating. Here is my etrecheck report:
EtreCheck version: 2.1.6 (109)
Report generated January 18, 2015 at 7:21:19 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Technical Specifications)
iMac - model: iMac14,3
1 3.1 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 750M - VRAM: 1024 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:17:9
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (283.26 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Hitachi-LG Data Storage Inc Portable Super Multi Drive
M-Audio M-Track Plus
LaCie Rugged USB3-FW 1 TB
disk1s1 (disk1s1) <not mounted> : 32 KB
Benjammun (disk1s3) /Volumes/Benjammun : 1.00 TB (483.01 GB free)
iLok iLok
BurrBrown from Texas Instruments USB AUDIO CODEC
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Extensions
[not loaded] com.caiaq.driver.NIUSBMaschineControllerDriver (2.6.0 - SDK 10.8) [Support]
[loaded] com.cyberic.SmoothMouse (9 - SDK 10.8) [Support]
/System/Library/Extensions
[not loaded] com.IKMultimedia.driver.StompIO1 (1.0.0) [Support]
[not loaded] com.caiaq.driver.NIUSBGuitarRigMobileDriver (2.4.23) [Support]
[not loaded] com.caiaq.driver.NIUSBHardwareDriver (2.4.23) [Support]
[loaded] com.digidesign.iokit.DigiDal (10.3.9f207 - SDK 10.6) [Support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Support]
[not loaded] com.wibu.codemeter.CmUSBMassStorage (1.0.7) [Support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Support]
Startup Items: ℹ️
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Daemons: ℹ️
[running] com.wibu.CodeMeter.Server.plist [Support]
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.avid.bsd.shoe.plist [Support]
[loaded] com.avid.bsd.ShoeTool.plist [Support]
[loaded] com.charlessoft.pacifist.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
[running] com.paceap.eden.licensed.plist [Support]
[loaded] PACESupport.plist [Support]
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Support]
[not loaded] com.valvesoftware.steamclean.plist [Support]
User Login Items: ℹ️
NIHardwareAgent Application Hidden (/Library/Application Support/Native Instruments/Hardware/NIHardwareAgent.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
Searchme [Cached] Adware! [Remove]
SlickSavings [Cached]
Amazon Shopping Assistant [Cached] Adware! [Remove]
Ebay Shopping Assistant [Cached] Adware! [Remove]
Audio Plug-ins: ℹ️
Avid CoreAudio: Version: 11.1.3.325 - SDK 10.8 [Support]
3rd Party Preference Panes: ℹ️
Java [Support]
Native Instruments USB Audio [Support]
SmoothMouse [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      3% WindowServer
      0% fontd
      0% AppleSpell
      0% Google Chrome
      0% dpd
Top Processes by Memory: ℹ️
241 MB Finder
206 MB mds_stores
137 MB Google Chrome
77 MB Google Chrome Helper
60 MB ocspd
Virtual Memory Information: ℹ️
4.82 GB Free RAM
2.13 GB Active RAM
775 MB Inactive RAM
861 MB Wired RAM
2.03 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 18, 2015, 07:04:46 PM Self test - passed
Jan 18, 2015, 06:34:24 PM /Library/Logs/DiagnosticReports/Pro Tools_2015-01-18-183424_[redacted].hang
Jan 18, 2015, 09:28:22 AM /Library/Logs/DiagnosticReports/Pro Tools_2015-01-18-092822_[redacted].hang
Jan 17, 2015, 05:45:34 PM /Library/Logs/DiagnosticReports/auvaltool_2015-01-17-174534_[redacted].hang
Jan 17, 2015, 05:45:06 PM /Library/Logs/DiagnosticReports/auvaltool_2015-01-17-174506_[redacted].hang
Jan 17, 2015, 05:01:00 PM /Library/Logs/DiagnosticReports/Logic Pro X_2015-01-17-170100_[redacted].cpu_resource.diag [Details]
Jan 17, 2015, 04:55:45 PM /Library/Logs/DiagnosticReports/iTunes_2015-01-17-165545_[redacted].hang
Jan 17, 2015, 04:55:44 PM /Library/Logs/DiagnosticReports/Logic Pro X_2015-01-17-165544_[redacted].hang
Jan 17, 2015, 04:47:52 PM /Library/Logs/DiagnosticReports/Logic Pro X_2015-01-17-164752_[redacted].cpu_resource.diag [Details]
Jan 17, 2015, 04:44:39 PM /Users/[redacted]/Library/Logs/DiagnosticReports/auvaltool_2015-01-17-164439_[r edacted].crash
Jan 16, 2015, 10:26:58 PM /Library/Logs/DiagnosticReports/Google Chrome_2015-01-16-222658_[redacted].hang
Jan 16, 2015, 10:16:25 PM /Library/Logs/DiagnosticReports/CleanMyMac 2_2015-01-16-221625_[redacted].hang
Jan 16, 2015, 09:56:07 PM /Library/Logs/DiagnosticReports/CleanMyMac 2_2015-01-16-215607_[redacted].cpu_resource.diag [Details]

Back up your Mac, if you have not already done so. To learn how to do that read Mac Basics: Time Machine backs up your Mac.
You inadvertently installed adware. Eradicating it is simple and you don't have to download or install anything to fix it. For an explanation or how this may have occurred, how to avoid it in the future, and for Apple's recommended solution read How to install adware.
OS X's Gatekeeper has been disabled. This basic Mac security feature is an essential defense against malware intrusion. To re-enable it read OS X: About Gatekeeper - Apple Support
That Mac has been affected by MacPaw "CleanMyMac". Read below.
It is not reasonable to expect a Mac to operate normally after using CleanMyMac. Like many ill-conceived "cleaning" utilities, it is capable of corrupting a Mac to the point that erasing it completely is the only practicable means of recovery. CleanMyMac is not the only example; it is merely popular due to marketing strategies that are as effective as they are intrusive.
There is no practicable way to reverse the effects of having used CleanMyMac2 other than to reinstall all affected files from backups or their original sources. Its developer's uninstallation instructions are ineffective despite their recent claims to the contrary. Only MacPaw, its developer, can know the reason for that, but I can think of two possibilities: either they are purposefully leaving components behind for reasons known only to them, or they simply don't know what they're doing. Neither one of those possibilities is particularly comforting for the user.
Reinstalling OS X alone will have no effect on either removing CleanMyMac or reversing the damage it is capable of inflicting upon a system.
Follow the applicable recovery procedure below:
If you have a backup that you created prior to using CleanMyMac, now is the time to use it. For Time Machine, boot OS X Recovery, and at the Mac OS X Utilities screen, choose Restore from Time Machine Backup. Choose a date preceding the installation of CleanMyMac.
If you do not have a backup that predates the use of CleanMyMac, create one now. To do that read Mac Basics: Time Machine backs up your Mac.
The recovery procedure will require that you erase the Mac using OS X Recovery, and then create a new user whose contents will be empty. You will then be able to use Setup Assistant to migrate your essential documents including photos, music, work products and other essential files.
When doing so, select only your previous User account and do not select "Applications", "Computer and Network Settings" or "Other files and folders". De-select those choices.
Subsequent to using Setup Assistant, you will need to reinstall the essential software you may require, once again remembering to install software only from their original sources, and omitting all non-essential software.
To erase and install Yosemite read: OS X Yosemite: Erase and reinstall OS X
To migrate your essential documents read: OS X Yosemite: Transfer your info from a computer or storage device and follow the procedure under Transfer info from a Time Machine backup or other storage device.

IMac Finder too slow

Finder is running really slow.
Any suggestions for getting it back up to speed?
Thank you!

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

IMac way too slow at home, but works perfectly at Genius bar - why?

My iMac is slow when doing things like switching users, waking up from screen saver and switching and/or opening applications. Sometimes the spinning wheel of love will spin for 30 seconds (seems like an hour). I've got a memory monitor and I can see that the memory is getting used up and not released but I don't think that is the problem.
Here's the kicker... when I take it to the genius bar they can never replicate the problem. It runs fine no matter what they do. So, I have to believe it is something going on with home network and/or printer.
My network has the iMac with kodak USB printer, macbook with epson USB printer, AppleTV. The problem is the same when I have everything wireless or using ethernet over AC power outlets. I also have a time machine and airport express which I no longer have hooked up.
Anybody have any clue what could be going on to cause all these problems? BTW, no issues with the macbook or appleTV (or iPhones or iPad for that matter).

I've got a memory monitor and I can see that the memory is getting used up and not released but I don't think that is the problem.
That should really slow it down, but no idea why there & not at the Genious bar, but possibly Networking, or what all you have connected at home.
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
In the Memory tab, are there a lot of Pageouts?

Pages 5.2 on iMac is too slow!!!

I have upgraded right now Pages 5.1 to Pages 5.2. I opened my file, but it is quite impossible to write. Pages is becoming very slow. One word needs a lot of seconds to appear on the screen! What is happened? Any solutions? I have already restarted Pages, My iMac, without success. What can I do?

Fruluda shows you how to export to Pages 09 format. The issue is that Pages 5.2, like Pages 5.0-5.1, is not only lacking in features, it is also very buggy. USers have complained of slowness while editing and searching (endless beach balls) and there have been widespread reports of data corruption and files that won;t open. 5.2 may fix some of these issues but I won;t not use the software for any important project. It is a toy, not a tool.

USB of my iMac 3G Too slow HELP!!

I received and old imac 3g from my brother. Now I'm using it as a "media center" for my apple TVs and Macbook. It was connected to a HD of 500Gb via firewire, but it got full. So I replace it with a HD of 1Tb (Westbook), but via USB. The iMac Reads it but it take like 5 minutes to recognize it, it works well streaming to my Apple TV, but it doesn't work via itunes to my MacBook. Another not: I can't connect any new Ipod to the USB, it says that it needs a faster blablabla...
Can I change my USB or I'm forced to reback up my library and buy another HD?
Thanks for any help.

You need to stick with using Firewire drives. Even on modern iMacs using Firewire is preferable as it out-performs USB2.0 in data transfer rates.
mrtotes

Transfer music from iPad to new iMac much too slow

I want to transfer my music and videos, but not my apps, from my 128 GB iPad Air to my new iMac/Mavericks.
I tried to do this by
Connecting the iPad to a USB port on the iMac
Initiating "Transfer Purchases" from iTunes
Unfortunately, this is ridiculously slow, it would take hours I estimate. For one think I have about 40 gig of apps and that takes forever to transfer. I thought that iMac supported USB 3?
Is there some reasonably quick way to do this? I can't sit around for 8 hours with my iPad hooked up to my Mac, I need it.

There are a lot of complaints about this. The bottleneck seems to be the iPad Air.
Syncing is slower on iPad Air

IMac performing very slow!

HI all,
I am running an imac with Maverics. I have 4GB of memory with a 2.7 Ghz processor. I have a 3 TB external drive and using Time machine with daily backups. The problem is, for the past few months, the performance of just about everything runs super slow. here are some examples:
1. Upon opening any application or program, I get the Spinning ball
2. I get programs shutting down unexpected all the time.
3. My mac is set to auto shut down at midnight. Ill wake up in the morning with error m,essages saying certain programs wouldnt let it shut down.
4. I have checked my Internet speed and am getting great upload and download speeds form the server, yet the safari webpages take forever to open.
5. OPening any files takes forever. Almost as if when its trying to read the file to pen it, it gets stuck.
6. Response from any data entry is slow. ie. as I type in a chat box or email, the letters and words are still populating in the box or email but Im done typing.
There are some others happening biut those are the big ones. Its annoying and very frustrating. My brother has his imac, same year, and it runs so fast and smooth and I have been trying to get to that point but cannot. Should I bring into a mac store and let them run their program on it and see if my imac is infected or at the very least, they can find the issue?
Thanks for the help.
Regards
Lou

Hardware Information:
          iMac (21.5-inch, Mid 2011)
          iMac - model: iMac12,1
          1 2.7 GHz Intel Core i5 CPU: 4 cores
          4 GB RAM
Video Information:
          AMD Radeon HD 6770M - VRAM: 512 MB
System Software:
          OS X 10.9.2 (13C1021) - Uptime: 0 days 6:11:39
Disk Information:
          ST31000528AS disk0 : (1 TB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) / [Startup]: 999.35 GB (534.76 GB free)
          OPTIARC DVD RW AD-5690H
USB Information:
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Inc. iPhone
          LaCie P'9233 Desktop Drive 3 TB
                    EFI (disk1s1) <not mounted>: 314.6 MB
                    LaCie (disk1s2) /Volumes/LaCie: 3 TB (2.24 TB free)
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Internal Memory Card Reader
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
          [kext loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
          [kext loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
          [not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
          [not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
          [not loaded] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0) Support
          [kext loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist Support
          [not loaded] com.gopro.stereomodestatus.plist Support
          [running] com.intego.BackupAssistant.daemon.plist Support
          [running] com.lacie.desktopmanager.service.plist Support
          [not loaded] com.leapfrog.connect.shell.plist Support
          [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
          [loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
          [loaded] com.intego.backupassistant.agent.plist Support
          [loaded] com.lacie.eventsactions.launcher.agent.plist Support
User Launch Agents:
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.adobe.ARM.[...].plist Support
          [loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist Support
          [loaded] com.facebook.videochat.[redacted].plist Support
          [loaded] com.google.keystone.agent.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
          [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
          [not loaded] com.spotify.webhelper.plist Support
          [running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
          None
Internet Plug-ins:
          Google Earth Web Plug-in: Version: 5.2 Support
          Default Browser: Version: 537 - SDK 10.9
          Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
          FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
          Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
          Flash Player: Version: 13.0.0.201 - SDK 10.6 Support
          QuickTime Plugin: Version: 7.7.3
          iPhotoPhotocast: Version: 7.0
          SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
          JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Mismatch! Oracle recommends Java 7 Update 55
Safari Extensions:
          Dashlane: Version: 2.4.0.55923
          ClickToFlash: Version: 2.9.2
          Facebook Photo Zoom: Version: 1.1206.11.1
          MLB.com Toolbar: Version: 1.1
          Searchme: Version: 1.3
          Awesome Screenshot: Version: 1.4.2
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 2.0 - SDK 10.9
          AppleAVBAudio: Version: 203.2 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
          Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
          Move_Media_Player: Version: npmnqmp 071706000001 Support
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
          ATTConnectEventEntry: Version: 1.0.3 - SDK 10.6
          WebEx: Version: 1.0 Support
          WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes:
          Flash Player Support
          GoPro Support
          MacFUSE Support
Time Machine:
          Skip System Files: NO
          Mobile backups: OFF
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 930.71 GB Disk used: 432.68 GB
          Destinations:
                    LaCie [Local] (Last used)
                    Total size: 3
                    Total number of backups: 76
                    Oldest backup: 2013-08-01 04:41:52 +0000
                    Last backup: 2014-04-24 17:43:49 +0000
                    Size of backup disk: Excellent
                              Backup size 3 > (Disk size 930.71 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               7%          PluginProcess
               2%          coreaudiod
               1%          WindowServer
               0%          Safari
               0%          com.apple.WebKit.Networking
Top Processes by Memory:
          233 MB          Safari
          201 MB          PluginProcess
          188 MB          OmniDiskSweeper
          143 MB          firefox
          98 MB          WebKitPluginHost
Virtual Memory Information:
          49 MB          Free RAM
          1.18 GB          Active RAM
          1.14 GB          Inactive RAM
          833 MB          Wired RAM
          1.33 GB          Page-ins
          33 MB          Page-outs

Slow start up since wire got removed accidentally...imac perform too slow

Similar Messages

Maybe you are looking for