Slow start [X problems?]

Question

I was using my current Arch install for some time now without any problem.
Yesterday I turned on my laptop as usual and the "boot" time was really slow compared to the time before...
Normally it took about 5 seconds to get me to GDM and then around 2 seconds to get GNOME ready for work...
Now, it is around 11 seconds for GDM and another 5 for GNOME...
I personally think that this is not so much something else but X  - because it will take around 5-6 seconds from the time when my GDM wallpaper will firstly show up to the time when the actual GDM login screen will pop-up.
I really don't know what is causing something like that, so I am asking here for help...
What logs can be useful?, so I can post them here...

Answer 1

Here is my dmesg;
[ 1.399889] pci 0000:00:1b.0: PME# disabled
[ 1.399906] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
[ 1.399956] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.399960] pci 0000:00:1c.0: PME# disabled
[ 1.399978] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
[ 1.400027] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.400031] pci 0000:00:1c.1: PME# disabled
[ 1.400061] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
[ 1.400312] pci 0000:00:1d.0: reg 10: [mem 0xb4405800-0xb4405bff]
[ 1.401775] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.401779] pci 0000:00:1d.0: PME# disabled
[ 1.401799] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 1.401850] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
[ 1.401953] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
[ 1.401975] pci 0000:00:1f.2: reg 10: [io 0x3048-0x304f]
[ 1.401984] pci 0000:00:1f.2: reg 14: [io 0x305c-0x305f]
[ 1.401994] pci 0000:00:1f.2: reg 18: [io 0x3040-0x3047]
[ 1.402003] pci 0000:00:1f.2: reg 1c: [io 0x3058-0x305b]
[ 1.402012] pci 0000:00:1f.2: reg 20: [io 0x3020-0x303f]
[ 1.402021] pci 0000:00:1f.2: reg 24: [mem 0xb4405000-0xb44057ff]
[ 1.402060] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.402064] pci 0000:00:1f.2: PME# disabled
[ 1.402079] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
[ 1.402093] pci 0000:00:1f.3: reg 10: [mem 0xb4406000-0xb44060ff 64bit]
[ 1.402112] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
[ 1.402144] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
[ 1.402164] pci 0000:00:1f.6: reg 10: [mem 0xb4404000-0xb4404fff 64bit]
[ 1.402275] pci 0000:01:00.0: [10ec:8168] type 0 class 0x000200
[ 1.402290] pci 0000:01:00.0: reg 10: [io 0x2000-0x20ff]
[ 1.402317] pci 0000:01:00.0: reg 18: [mem 0xb0404000-0xb0404fff 64bit pref]
[ 1.402335] pci 0000:01:00.0: reg 20: [mem 0xb0400000-0xb0403fff 64bit pref]
[ 1.402380] pci 0000:01:00.0: supports D1 D2
[ 1.402382] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.402386] pci 0000:01:00.0: PME# disabled
[ 1.402423] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.402427] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.402430] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb43fffff]
[ 1.402436] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.402523] pci 0000:02:00.0: [14e4:4727] type 0 class 0x000280
[ 1.402545] pci 0000:02:00.0: reg 10: [mem 0xb2400000-0xb2403fff 64bit]
[ 1.402635] pci 0000:02:00.0: supports D1 D2
[ 1.402673] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 1.402676] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.402680] pci 0000:00:1c.1: bridge window [mem 0xb2400000-0xb33fffff]
[ 1.402685] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.402738] pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
[ 1.402742] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 1.402746] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 1.402751] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 1.402753] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 1.402755] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 1.402757] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 1.402759] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode)
[ 1.402773] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.402891] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.402951] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.402983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 1.403060] \_SB_.PCI0:_OSC invalid UUID
[ 1.403061] _OSC request data:1 1f 1f
[ 1.403065] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.403090] \_SB_.PCI0:_OSC invalid UUID
[ 1.403091] _OSC request data:1 0 1d
[ 1.403094] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.403095] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.407020] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 1.407076] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
[ 1.407094] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
[ 1.407110] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
[ 1.407124] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
[ 1.407138] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
[ 1.407152] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
[ 1.407178] pci0000:ff: Requesting ACPI _OSC control (0x1d)
[ 1.407180] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 1.407182] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.407361] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.407396] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.407430] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.407463] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 1.407497] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.407530] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.407564] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.407598] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 1.407682] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.407689] vgaarb: loaded
[ 1.407690] vgaarb: bridge control possible 0000:00:02.0
[ 1.407755] PCI: Using ACPI for IRQ routing
[ 1.415815] PCI: pci_cache_line_size set to 64 bytes
[ 1.415867] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[ 1.415869] reserve RAM buffer: 000000009b63f000 - 000000009bffffff
[ 1.415870] reserve RAM buffer: 000000009b800000 - 000000009bffffff
[ 1.415980] NetLabel: Initializing
[ 1.415982] NetLabel: domain hash size = 128
[ 1.415983] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.415994] NetLabel: unlabeled traffic allowed by default
[ 1.416009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.416013] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.418028] Switching to clocksource hpet
[ 1.420931] Switched to NOHz mode on CPU #0
[ 1.420991] Switched to NOHz mode on CPU #1
[ 1.421038] Switched to NOHz mode on CPU #3
[ 1.421051] Switched to NOHz mode on CPU #2
[ 1.422891] pnp: PnP ACPI init
[ 1.422907] ACPI: bus type pnp registered
[ 1.423199] pnp 00:00: [bus 00-fe]
[ 1.423201] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.423203] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.423205] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.423206] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.423208] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.423209] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.423211] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.423212] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.423214] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.423215] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.423217] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.423218] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.423221] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.423222] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.423224] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.423225] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.423227] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.423228] pnp 00:00: [mem 0xa0000000-0xfeafffff window]
[ 1.423230] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 1.423325] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.423362] pnp 00:01: [io 0x0000-0x001f]
[ 1.423364] pnp 00:01: [io 0x0081-0x0091]
[ 1.423365] pnp 00:01: [io 0x0093-0x009f]
[ 1.423366] pnp 00:01: [io 0x00c0-0x00df]
[ 1.423368] pnp 00:01: [dma 4]
[ 1.423387] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.423394] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.423411] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.423499] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.423522] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.423530] pnp 00:04: [io 0x00f0]
[ 1.423540] pnp 00:04: [irq 13]
[ 1.423558] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.423567] pnp 00:05: [io 0x002e-0x002f]
[ 1.423568] pnp 00:05: [io 0x004e-0x004f]
[ 1.423569] pnp 00:05: [io 0x0061]
[ 1.423570] pnp 00:05: [io 0x0063]
[ 1.423571] pnp 00:05: [io 0x0065]
[ 1.423573] pnp 00:05: [io 0x0067]
[ 1.423574] pnp 00:05: [io 0x0070]
[ 1.423575] pnp 00:05: [io 0x0080]
[ 1.423576] pnp 00:05: [io 0x0092]
[ 1.423577] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.423579] pnp 00:05: [io 0x0680-0x069f]
[ 1.423580] pnp 00:05: [io 0x0800-0x080f]
[ 1.423581] pnp 00:05: [io 0xffff]
[ 1.423582] pnp 00:05: [io 0xffff]
[ 1.423583] pnp 00:05: [io 0x0400-0x047f]
[ 1.423585] pnp 00:05: [io 0x0500-0x0501]
[ 1.423586] pnp 00:05: [io 0x0700-0x077f]
[ 1.423587] pnp 00:05: [io 0x164e-0x164f]
[ 1.423599] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
[ 1.423637] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.423639] system 00:05: [io 0x0800-0x080f] has been reserved
[ 1.423640] system 00:05: [io 0xffff] has been reserved
[ 1.423642] system 00:05: [io 0xffff] has been reserved
[ 1.423644] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.423646] system 00:05: [io 0x0500-0x0501] has been reserved
[ 1.423647] system 00:05: [io 0x0700-0x077f] has been reserved
[ 1.423650] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.423657] pnp 00:06: [io 0x0070-0x0077]
[ 1.423662] pnp 00:06: [irq 8]
[ 1.423682] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.423690] pnp 00:07: [io 0x0060]
[ 1.423691] pnp 00:07: [io 0x0064]
[ 1.423696] pnp 00:07: [irq 1]
[ 1.423715] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.423724] pnp 00:08: [irq 12]
[ 1.423743] pnp 00:08: Plug and Play ACPI device, IDs SYN1e21 SYN1e00 SYN0002 PNP0f13 (active)
[ 1.423836] pnp 00:09: [irq 23]
[ 1.423868] pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 1.424022] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.424025] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
[ 1.424027] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.424028] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.424029] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.424031] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.424032] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.424034] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
[ 1.424035] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.424037] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.424038] pnp 00:0a: [mem 0xb4500000-0xb4500fff]
[ 1.424086] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.424088] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.424090] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.424091] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.424093] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.424095] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.424097] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.424099] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.424101] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.424103] system 00:0a: [mem 0xb4500000-0xb4500fff] has been reserved
[ 1.424105] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.424278] pnp 00:0b: [bus ff]
[ 1.424319] pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.424340] pnp: PnP ACPI: found 12 devices
[ 1.424341] ACPI: ACPI bus type pnp unregistered
[ 1.430015] PCI: max bus depth: 1 pci_try_num: 2
[ 1.430040] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.430043] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.430047] pci 0000:00:1c.0: bridge window [mem 0xb3400000-0xb43fffff]
[ 1.430051] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.430056] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 1.430059] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.430063] pci 0000:00:1c.1: bridge window [mem 0xb2400000-0xb33fffff]
[ 1.430067] pci 0000:00:1c.1: bridge window [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.430072] pci 0000:00:1e.0: PCI bridge to [bus 03-03]
[ 1.430074] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.430078] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.430081] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.430096] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.430101] pci 0000:00:1c.0: setting latency timer to 64
[ 1.430108] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.430112] pci 0000:00:1c.1: setting latency timer to 64
[ 1.430117] pci 0000:00:1e.0: setting latency timer to 64
[ 1.430121] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.430122] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.430124] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.430126] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.430128] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.430129] pci_bus 0000:01: resource 1 [mem 0xb3400000-0xb43fffff]
[ 1.430131] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb13fffff 64bit pref]
[ 1.430133] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.430134] pci_bus 0000:02: resource 1 [mem 0xb2400000-0xb33fffff]
[ 1.430136] pci_bus 0000:02: resource 2 [mem 0xb1400000-0xb23fffff 64bit pref]
[ 1.430138] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[ 1.430140] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[ 1.430141] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.430143] pci_bus 0000:03: resource 7 [mem 0xa0000000-0xfeafffff]
[ 1.430203] NET: Registered protocol family 2
[ 1.430353] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.431201] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.433022] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.433247] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.433249] TCP reno registered
[ 1.433259] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.433280] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.433499] NET: Registered protocol family 1
[ 1.433516] pci 0000:00:02.0: Boot video device
[ 1.458155] PCI: CLS 64 bytes, default 64
[ 1.458225] Unpacking initramfs...
[ 1.484134] Freeing initrd memory: 2580k freed
[ 1.484594] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.484598] Placing 64MB software IO TLB between ffff88009763b000 - ffff88009b63b000
[ 1.484600] software IO TLB at phys 0x9763b000 - 0x9b63b000
[ 1.484624] Simple Boot Flag at 0x44 set to 0x1
[ 1.485050] audit: initializing netlink socket (disabled)
[ 1.485062] type=2000 audit(1315822178.323:1): initialized
[ 1.492695] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.508513] VFS: Disk quotas dquot_6.5.2
[ 1.508622] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.508757] msgmni has been set to 7525
[ 1.508943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.508973] io scheduler noop registered
[ 1.508975] io scheduler deadline registered
[ 1.509014] io scheduler cfq registered (default)
[ 1.509246] intel_idle: MWAIT substates: 0x1120
[ 1.509248] intel_idle: v0.4 model 0x25
[ 1.509249] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.509284] ERST: Table is not found!
[ 1.509354] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.741598] Linux agpgart interface v0.103
[ 1.741664] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.744905] i8042: Detected active multiplexing controller, rev 1.1
[ 1.747808] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.747819] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.747821] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.747822] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.747824] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.747950] mousedev: PS/2 mouse device common for all mice
[ 1.747993] rtc_cmos 00:06: RTC can wake from S4
[ 1.748085] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.748111] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.748186] cpuidle: using governor ladder
[ 1.748297] cpuidle: using governor menu
[ 1.748468] TCP cubic registered
[ 1.748471] NET: Registered protocol family 17
[ 1.748478] Registering the dns_resolver key type
[ 1.748548] PM: Hibernation image not present or could not be loaded.
[ 1.748552] registered taskstats version 1
[ 1.756092] rtc_cmos 00:06: setting system clock to 2011-09-12 10:09:39 UTC (1315822179)
[ 1.756139] Initializing network drop monitor service
[ 1.757333] Freeing unused kernel memory: 712k freed
[ 1.757444] Write protecting the kernel read-only data: 6144k
[ 1.757655] Freeing unused kernel memory: 12k freed
[ 1.759735] Freeing unused kernel memory: 776k freed
[ 1.775432] udevd[57]: starting version 173
[ 1.777775] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.777831] ACPI: Lid Switch [LID0]
[ 1.777865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.777869] ACPI: Power Button [PWRB]
[ 1.777902] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.777905] ACPI: Power Button [PWRF]
[ 1.778634] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.778768] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.779673] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 1.779813] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xa0000000
[ 1.783177] [drm] Initialized drm 1.1.0 20060810
[ 1.783202] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.793259] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.793264] i915 0000:00:02.0: setting latency timer to 64
[ 1.832082] mtrr: no more MTRRs available
[ 1.832084] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.832892] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[ 1.832897] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.832899] [drm] Driver supports precise vblank timestamp query.
[ 1.832941] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.062561] fbcon: inteldrmfb (fb0) is primary device
[ 2.225223] Console: switching to colour frame buffer device 170x48
[ 2.227636] fb0: inteldrmfb frame buffer device
[ 2.227638] drm: registered panic notifier
[ 2.258632] acpi device:02: registered as cooling_device0
[ 2.258893] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 2.258900] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.259098] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.308280] usbcore: registered new interface driver usbfs
[ 2.309125] usbcore: registered new interface driver hub
[ 2.309250] usbcore: registered new device driver usb
[ 2.310828] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.310863] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.310902] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.310907] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.311162] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.311487] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.316285] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.316395] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb4405c00
[ 2.321793] SCSI subsystem initialized
[ 2.325804] libata version 3.00 loaded.
[ 2.327640] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.327772] hub 1-0:1.0: USB hub found
[ 2.327777] hub 1-0:1.0: 3 ports detected
[ 2.328049] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.328091] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.328095] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.328105] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.328135] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.332089] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.332106] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xb4405800
[ 2.344397] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.344617] hub 2-0:1.0: USB hub found
[ 2.344623] hub 2-0:1.0: 3 ports detected
[ 2.344727] ahci 0000:00:1f.2: version 3.0
[ 2.344749] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.344823] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.344901] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x13 impl SATA mode
[ 2.344905] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems sxs apst
[ 2.344909] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.358220] scsi0 : ahci
[ 2.358441] scsi1 : ahci
[ 2.358586] scsi2 : ahci
[ 2.358706] scsi3 : ahci
[ 2.358826] scsi4 : ahci
[ 2.359017] ata1: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405100 irq 41
[ 2.359022] ata2: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405180 irq 41
[ 2.359025] ata3: DUMMY
[ 2.359026] ata4: DUMMY
[ 2.359029] ata5: SATA max UDMA/133 abar m2048@0xb4405000 port 0xb4405300 irq 41
[ 2.484286] Refined TSC clocksource calibration: 2527.000 MHz.
[ 2.484293] Switching to clocksource tsc
[ 2.634223] usb 1-1: new high speed USB device number 2 using ehci_hcd
[ 2.677534] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.677562] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.677581] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.678518] ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OCH0A, max UDMA/100
[ 2.678523] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.679686] ata1.00: configured for UDMA/100
[ 2.679959] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5
[ 2.689123] ata2.00: ATAPI: hp CDDVDW TS-U633J, HH00, max UDMA/100
[ 2.701580] ata2.00: configured for UDMA/100
[ 2.707534] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-U633J HH00 PQ: 0 ANSI: 5
[ 2.712547] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.712587] sd 0:0:0:0: [sda] Write Protect is off
[ 2.712590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.712606] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.719341] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.719347] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.719649] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.742044] sda: sda1 sda2 sda3 sda4
[ 2.742382] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.758345] hub 1-1:1.0: USB hub found
[ 2.758553] hub 1-1:1.0: 6 ports detected
[ 2.864083] usb 2-1: new high speed USB device number 2 using ehci_hcd
[ 2.988220] hub 2-1:1.0: USB hub found
[ 2.988316] hub 2-1:1.0: 8 ports detected
[ 3.067413] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
[ 3.161455] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5
[ 3.161553] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
[ 3.163718] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6
[ 3.163910] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
[ 3.163939] usbcore: registered new interface driver usbhid
[ 3.163941] usbhid: USB HID core driver
[ 3.224001] usb 1-1.4: new full speed USB device number 4 using ehci_hcd
[ 3.251687] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.390667] usb 2-1.3: new full speed USB device number 3 using ehci_hcd
[ 3.557148] usb 2-1.6: new full speed USB device number 4 using ehci_hcd
[ 3.690543] usb 2-1.6: new high speed USB device number 5 using ehci_hcd
[ 4.728486] udevd[257]: starting version 173
[ 4.961545] fuse init (API version 7.16)
[ 5.311658] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.311727] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 5.311750] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.400181] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 5.439115] cfg80211: Calling CRDA to update world regulatory domain
[ 5.439363] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.439579] ACPI: AC Adapter [AC] (on-line)
[ 5.455480] ACPI: Fan [FAN0] (on)
[ 5.472017] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 5.534633] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.534678] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.695022] iTCO_vendor_support: vendor-support=0
[ 5.743083] ACPI: acpi_idle yielding to intel_idle
[ 5.762814] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.096053] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 6.096065] ACPI: Battery Slot [BAT0] (battery present)
[ 6.096803] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
[ 6.097799] wmi: Mapper loaded
[ 6.109000] thermal LNXTHERM:00: registered as thermal_zone0
[ 6.109004] ACPI: Thermal Zone [TZ00] (47 C)
[ 6.109147] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.109210] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.109320] input: HDA Intel HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.109443] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 6.109463] intel ips 0000:00:1f.6: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 6.109709] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 6.109736] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 6.109858] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.109865] mei 0000:00:16.0: setting latency timer to 64
[ 6.135585] thermal LNXTHERM:01: registered as thermal_zone1
[ 6.135590] ACPI: Thermal Zone [TZ01] (41 C)
[ 6.149371] cfg80211: World regulatory domain updated:
[ 6.149375] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.149380] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.149385] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.149389] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 6.149393] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.149397] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.156082] brcmutil: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.162465] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.163703] brcmsmac 0000:02:00.0: bus 2 slot 0 func 0 irq 10
[ 6.163719] brcmsmac 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.163726] brcmsmac 0000:02:00.0: setting latency timer to 64
[ 6.165613] thermal LNXTHERM:02: registered as thermal_zone2
[ 6.165618] ACPI: Thermal Zone [TZ02] (0 C)
[ 6.195864] hp_accel: laptop model unknown, using default axes configuration
[ 6.196483] lis3lv02d: 8 bits sensor found
[ 6.198656] Bluetooth: Core ver 2.16
[ 6.198679] NET: Registered protocol family 31
[ 6.198681] Bluetooth: HCI device and connection manager initialized
[ 6.198684] Bluetooth: HCI socket layer initialized
[ 6.198685] Bluetooth: L2CAP socket layer initialized
[ 6.198830] Bluetooth: SCO socket layer initialized
[ 6.204531] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.204729] usbcore: registered new interface driver btusb
[ 6.235594] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
[ 6.235765] Registered led device: hp::hddprotect
[ 6.235792] hp_accel: driver loaded
[ 6.260921] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.261029] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 6.261143] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.440005] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.440469] cfg80211: Calling CRDA for country: US
[ 6.442919] cfg80211: Regulatory domain changed to country: US
[ 6.442922] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 6.442925] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 6.442928] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 6.442931] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.442933] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.442936] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 6.442938] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 6.572273] Linux media interface: v0.10
[ 6.623740] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.623761] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.623816] r8169 0000:01:00.0: setting latency timer to 64
[ 6.623867] r8169 0000:01:00.0: irq 43 for MSI/MSI-X
[ 6.624050] r8169 0000:01:00.0: eth0: RTL8168d/8111d at 0xffffc900110e2000, 64:31:50:91:43:ca, XID 083000c0 IRQ 43
[ 6.632239] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0x5a0400
[ 6.656899] Linux video capture interface: v2.00
[ 6.666410] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 6.715502] input: HP WMI hotkeys as /devices/virtual/input/input14
[ 6.746144] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a28)
[ 6.754579] input: HP Webcam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input15
[ 6.754640] usbcore: registered new interface driver uvcvideo
[ 6.754641] USB Video Class driver (v1.1.0)
[ 8.210568] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 8.493297] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 8.598490] Adding 6144856k swap on /dev/sda2. Priority:-1 extents:1 across:6144856k
[ 12.326864] r8169 0000:01:00.0: eth0: link down
[ 12.402050] ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
[ 12.402096] ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
[ 12.402731] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
[ 14.564279] wlan0: authenticate with 30:46:9a:7c:42:2b (try 1)
[ 14.732052] wlan0: authenticated
[ 14.735599] wlan0: associate with 30:46:9a:7c:42:2b (try 1)
[ 14.745975] wlan0: RX AssocResp from 30:46:9a:7c:42:2b (capab=0x411 status=0 aid=2)
[ 14.745980] wlan0: associated
[ 14.746521] ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: true (implement)
[ 14.746532] ieee80211 phy0: brcmsmac: wl_ops_bss_info_changed: associated
[ 14.746546] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement)
[ 15.042566] Intel AES-NI instructions are not detected.
[ 15.190492] padlock_aes: VIA PadLock not detected.
[ 17.491412] NET: Registered protocol family 10
[ 17.492108] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.298691] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 22.454574] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 24.772129] ieee80211 phy0: wl_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
[ 27.990167] wlan0: no IPv6 routers present
[ 64.354689] chromium-sandbo (1574): /proc/1572/oom_adj is deprecated, please use /proc/1572/oom_score_adj instead.
Not sure about the latest line...
Xorg.log;
[ 12.466]
X.Org X Server 1.11.0
Release Date: 2011-08-26
[ 12.466] X Protocol Version 11, Revision 0
[ 12.466] Build Operating System: Linux 3.0-ARCH x86_64
[ 12.466] Current Operating System: Linux mtldb 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 08:53:25 CEST 2011 x86_64
[ 12.466] Kernel command line: root=/dev/disk/by-uuid/3721c9e1-c884-4b12-bc6e-960948676acd ro
[ 12.466] Build Date: 29 August 2011 07:21:16AM
[ 12.466]
[ 12.466] Current version of pixman: 0.22.2
[ 12.466] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.466] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.466] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 12 11:09:50 2011
[ 12.530] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 12.569] (==) No Layout section. Using the first Screen section.
[ 12.569] (==) No screen section available. Using defaults.
[ 12.569] (**) |-->Screen "Default Screen Section" (0)
[ 12.569] (**) | |-->Monitor "<default monitor>"
[ 12.570] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 12.570] (==) Automatically adding devices
[ 12.570] (==) Automatically enabling devices
[ 12.603] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 12.603] Entry deleted from font path.
[ 12.606] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 12.606] Entry deleted from font path.
[ 12.606] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 12.606] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 12.606] Entry deleted from font path.
[ 12.606] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 12.606] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 12.606] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 12.606] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 12.606] (II) Loader magic: 0x7cbae0
[ 12.606] (II) Module ABI versions:
[ 12.606] X.Org ANSI C Emulation: 0.4
[ 12.606] X.Org Video Driver: 11.0
[ 12.606] X.Org XInput driver : 13.0
[ 12.606] X.Org Server Extension : 5.0
[ 12.607] (--) PCI:*(0:0:2:0) 8086:0046:103c:146a rev 2, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00003050/8
[ 12.607] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 12.607] (II) LoadModule: "extmod"
[ 12.648] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 12.659] (II) Module extmod: vendor="X.Org Foundation"
[ 12.659] compiled for 1.11.0, module version = 1.0.0
[ 12.659] Module class: X.Org Server Extension
[ 12.659] ABI class: X.Org Server Extension, version 5.0
[ 12.659] (II) Loading extension MIT-SCREEN-SAVER
[ 12.659] (II) Loading extension XFree86-VidModeExtension
[ 12.659] (II) Loading extension XFree86-DGA
[ 12.659] (II) Loading extension DPMS
[ 12.659] (II) Loading extension XVideo
[ 12.659] (II) Loading extension XVideo-MotionCompensation
[ 12.659] (II) Loading extension X-Resource
[ 12.659] (II) LoadModule: "dbe"
[ 12.659] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 12.668] (II) Module dbe: vendor="X.Org Foundation"
[ 12.668] compiled for 1.11.0, module version = 1.0.0
[ 12.668] Module class: X.Org Server Extension
[ 12.668] ABI class: X.Org Server Extension, version 5.0
[ 12.668] (II) Loading extension DOUBLE-BUFFER
[ 12.668] (II) LoadModule: "glx"
[ 12.668] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 12.674] (II) Module glx: vendor="X.Org Foundation"
[ 12.674] compiled for 1.11.0, module version = 1.0.0
[ 12.674] ABI class: X.Org Server Extension, version 5.0
[ 12.674] (==) AIGLX enabled
[ 12.674] (II) Loading extension GLX
[ 12.674] (II) LoadModule: "record"
[ 12.674] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 12.681] (II) Module record: vendor="X.Org Foundation"
[ 12.681] compiled for 1.11.0, module version = 1.13.0
[ 12.681] Module class: X.Org Server Extension
[ 12.681] ABI class: X.Org Server Extension, version 5.0
[ 12.681] (II) Loading extension RECORD
[ 12.681] (II) LoadModule: "dri"
[ 12.681] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 12.696] (II) Module dri: vendor="X.Org Foundation"
[ 12.696] compiled for 1.11.0, module version = 1.0.0
[ 12.696] ABI class: X.Org Server Extension, version 5.0
[ 12.696] (II) Loading extension XFree86-DRI
[ 12.696] (II) LoadModule: "dri2"
[ 12.696] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.696] (II) Module dri2: vendor="X.Org Foundation"
[ 12.696] compiled for 1.11.0, module version = 1.2.0
[ 12.696] ABI class: X.Org Server Extension, version 5.0
[ 12.696] (II) Loading extension DRI2
[ 12.696] (==) Matched intel as autoconfigured driver 0
[ 12.696] (==) Matched vesa as autoconfigured driver 1
[ 12.696] (==) Matched fbdev as autoconfigured driver 2
[ 12.696] (==) Assigned the driver to the xf86ConfigLayout
[ 12.696] (II) LoadModule: "intel"
[ 12.727] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12.739] (II) Module intel: vendor="X.Org Foundation"
[ 12.739] compiled for 1.10.99.902, module version = 2.16.0
[ 12.739] Module class: X.Org Video Driver
[ 12.739] ABI class: X.Org Video Driver, version 11.0
[ 12.739] (II) LoadModule: "vesa"
[ 12.739] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 12.740] (II) Module vesa: vendor="X.Org Foundation"
[ 12.740] compiled for 1.10.99.902, module version = 2.3.0
[ 12.740] Module class: X.Org Video Driver
[ 12.740] ABI class: X.Org Video Driver, version 11.0
[ 12.740] (II) LoadModule: "fbdev"
[ 12.740] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 12.740] (II) Module fbdev: vendor="X.Org Foundation"
[ 12.740] compiled for 1.10.99.902, module version = 0.4.2
[ 12.740] ABI class: X.Org Video Driver, version 11.0
[ 12.740] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 12.741] (II) VESA: driver for VESA chipsets: vesa
[ 12.741] (II) FBDEV: driver for framebuffer: fbdev
[ 12.741] (++) using VT number 7
[ 12.745] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 12.745] (WW) Falling back to old probe method for vesa
[ 12.745] (WW) Falling back to old probe method for fbdev
[ 12.745] (II) Loading sub module "fbdevhw"
[ 12.745] (II) LoadModule: "fbdevhw"
[ 12.745] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 12.755] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12.755] compiled for 1.11.0, module version = 0.0.2
[ 12.755] ABI class: X.Org Video Driver, version 11.0
[ 12.756] drmOpenDevice: node name is /dev/dri/card0
[ 12.756] drmOpenDevice: open result is 8, (OK)
[ 12.756] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 12.756] drmOpenDevice: node name is /dev/dri/card0
[ 12.756] drmOpenDevice: open result is 8, (OK)
[ 12.756] drmOpenByBusid: drmOpenMinor returns 8
[ 12.756] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 12.756] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.756] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 12.756] (==) intel(0): RGB weight 888
[ 12.756] (==) intel(0): Default visual is TrueColor
[ 12.756] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 12.756] (--) intel(0): Chipset: "Arrandale"
[ 12.756] (**) intel(0): Relaxed fencing enabled
[ 12.756] (**) intel(0): Wait on SwapBuffers? enabled
[ 12.756] (**) intel(0): Triple buffering? enabled
[ 12.756] (**) intel(0): Framebuffer tiled
[ 12.756] (**) intel(0): Pixmaps tiled
[ 12.756] (**) intel(0): 3D buffers tiled
[ 12.756] (**) intel(0): SwapBuffers wait enabled
[ 12.756] (==) intel(0): video overlay key set to 0x101fe
[ 12.756] (II) intel(0): Output LVDS1 has no monitor section
[ 12.756] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 12.756] (II) intel(0): Output VGA1 has no monitor section
[ 12.778] (II) intel(0): Output HDMI1 has no monitor section
[ 12.816] (II) intel(0): Output DP1 has no monitor section
[ 12.816] (II) intel(0): EDID for output LVDS1
[ 12.816] (II) intel(0): Manufacturer: AUO Model: 223c Serial#: 0
[ 12.816] (II) intel(0): Year: 2010 Week: 0
[ 12.816] (II) intel(0): EDID Version: 1.4
[ 12.816] (II) intel(0): Digital Display Input
[ 12.816] (II) intel(0): 6 bits per channel
[ 12.816] (II) intel(0): Digital interface is undefined
[ 12.816] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 12.816] (II) intel(0): Gamma: 2.20
[ 12.816] (II) intel(0): No DPMS capabilities specified
[ 12.816] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 12.816] (II) intel(0): First detailed timing is preferred mode
[ 12.816] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 12.816] (II) intel(0): redX: 0.607 redY: 0.349 greenX: 0.329 greenY: 0.550
[ 12.816] (II) intel(0): blueX: 0.147 blueY: 0.136 whiteX: 0.313 whiteY: 0.329
[ 12.816] (II) intel(0): Manufacturer's mask: 0
[ 12.817] (II) intel(0): Supported detailed timing:
[ 12.817] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 12.817] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 12.817] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 12.817] (II) intel(0): Supported detailed timing:
[ 12.817] (II) intel(0): clock: 46.2 MHz Image Size: 309 x 173 mm
[ 12.817] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 12.817] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 12.817] (II) intel(0): Unknown vendor-specific block 2
[ 12.817] (II) intel(0): EDID (in hex):
[ 12.817] (II) intel(0): 00ffffffffffff0006af3c2200000000
[ 12.817] (II) intel(0): 00140104901f11780297f59b59548c25
[ 12.817] (II) intel(0): 22505400000001010101010101010101
[ 12.817] (II) intel(0): 010101010101121b5646500023302616
[ 12.817] (II) intel(0): 360035ad100000180c12564650002330
[ 12.817] (II) intel(0): 2616360035ad10000018000000000000
[ 12.817] (II) intel(0): 00000000000000000000000000000002
[ 12.817] (II) intel(0): 000c33f90a3c641f14226e202020007d
[ 12.817] (II) intel(0): EDID vendor "AUO", prod id 8764
[ 12.817] (II) intel(0): Printing DDC gathered Modelines:
[ 12.817] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz)
[ 12.817] (II) intel(0): Modeline "1366x768"x0.0 46.20 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (32.2 kHz)
[ 12.817] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 12.817] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 12.817] (II) intel(0): Printing probed modes for output LVDS1
[ 12.817] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz)
[ 12.817] (II) intel(0): Modeline "1366x768"x40.1 46.20 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (32.2 kHz)
[ 12.817] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 12.817] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 12.817] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 12.817] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 12.817] (II) intel(0): EDID for output VGA1
[ 12.839] (II) intel(0): EDID for output HDMI1
[ 12.880] (II) intel(0): EDID for output DP1
[ 12.880] (II) intel(0): Output LVDS1 connected
[ 12.880] (II) intel(0): Output VGA1 disconnected
[ 12.880] (II) intel(0): Output HDMI1 disconnected
[ 12.880] (II) intel(0): Output DP1 disconnected
[ 12.880] (II) intel(0): Using exact sizes for initial modes
[ 12.880] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 12.880] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 12.880] (II) intel(0): Kernel page flipping support detected, enabling
[ 12.880] (**) intel(0): Display dimensions: (310, 170) mm
[ 12.880] (**) intel(0): DPI set to (111, 114)
[ 12.880] (II) Loading sub module "fb"
[ 12.880] (II) LoadModule: "fb"
[ 12.880] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.890] (II) Module fb: vendor="X.Org Foundation"
[ 12.890] compiled for 1.11.0, module version = 1.0.0
[ 12.890] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.890] (II) Loading sub module "dri2"
[ 12.890] (II) LoadModule: "dri2"
[ 12.890] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 12.890] (II) Module dri2: vendor="X.Org Foundation"
[ 12.890] compiled for 1.11.0, module version = 1.2.0
[ 12.890] ABI class: X.Org Server Extension, version 5.0
[ 12.890] (II) UnloadModule: "vesa"
[ 12.890] (II) Unloading vesa
[ 12.890] (II) UnloadModule: "fbdev"
[ 12.890] (II) Unloading fbdev
[ 12.890] (II) UnloadModule: "fbdevhw"
[ 12.890] (II) Unloading fbdevhw
[ 12.890] (==) Depth 24 pixmap format is 32 bpp
[ 12.890] (II) intel(0): [DRI2] Setup complete
[ 12.890] (II) intel(0): [DRI2] DRI driver: i965
[ 12.890] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 12.898] (II) UXA(0): Driver registered support for the following operations:
[ 12.898] (II) solid
[ 12.898] (II) copy
[ 12.898] (II) composite (RENDER acceleration)
[ 12.898] (II) put_image
[ 12.898] (II) get_image
[ 12.898] (==) intel(0): Backing store disabled
[ 12.898] (==) intel(0): Silken mouse enabled
[ 12.898] (II) intel(0): Initializing HW Cursor
[ 12.960] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12.960] (==) intel(0): DPMS enabled
[ 12.960] (==) intel(0): Intel XvMC decoder enabled
[ 12.960] (II) intel(0): Set up textured video
[ 12.960] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 12.960] (II) intel(0): direct rendering: DRI2 Enabled
[ 12.960] (==) intel(0): hotplug detection: "enabled"
[ 12.960] (--) RandR disabled
[ 12.960] (II) Initializing built-in extension Generic Event Extension
[ 12.960] (II) Initializing built-in extension SHAPE
[ 12.960] (II) Initializing built-in extension MIT-SHM
[ 12.960] (II) Initializing built-in extension XInputExtension
[ 12.960] (II) Initializing built-in extension XTEST
[ 12.960] (II) Initializing built-in extension BIG-REQUESTS
[ 12.960] (II) Initializing built-in extension SYNC
[ 12.960] (II) Initializing built-in extension XKEYBOARD
[ 12.960] (II) Initializing built-in extension XC-MISC
[ 12.960] (II) Initializing built-in extension SECURITY
[ 12.960] (II) Initializing built-in extension XINERAMA
[ 12.960] (II) Initializing built-in extension XFIXES
[ 12.960] (II) Initializing built-in extension RENDER
[ 12.960] (II) Initializing built-in extension RANDR
[ 12.960] (II) Initializing built-in extension COMPOSITE
[ 12.960] (II) Initializing built-in extension DAMAGE
[ 13.125] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 13.126] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 13.126] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 13.126] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 13.126] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 13.126] (II) AIGLX: Loaded and initialized i965
[ 13.126] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 13.126] (II) intel(0): Setting screen physical size to 361 x 203
[ 13.442] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.442] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.442] (II) LoadModule: "evdev"
[ 13.456] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.462] (II) Module evdev: vendor="X.Org Foundation"
[ 13.462] compiled for 1.10.99.902, module version = 2.6.0
[ 13.462] Module class: X.Org XInput Driver
[ 13.462] ABI class: X.Org XInput driver, version 13.0
[ 13.462] (II) Using input driver 'evdev' for 'Power Button'
[ 13.462] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.462] (**) Power Button: always reports core events
[ 13.462] (**) Power Button: Device: "/dev/input/event2"
[ 13.462] (--) Power Button: Found keys
[ 13.462] (II) Power Button: Configuring as keyboard
[ 13.462] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 13.462] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.462] (**) Option "xkb_rules" "evdev"
[ 13.462] (**) Option "xkb_model" "evdev"
[ 13.462] (**) Option "xkb_layout" "gb"
[ 13.488] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 13.488] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 13.488] (II) Using input driver 'evdev' for 'Video Bus'
[ 13.488] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.488] (**) Video Bus: always reports core events
[ 13.488] (**) Video Bus: Device: "/dev/input/event4"
[ 13.488] (--) Video Bus: Found keys
[ 13.488] (II) Video Bus: Configuring as keyboard
[ 13.488] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 13.488] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 13.488] (**) Option "xkb_rules" "evdev"
[ 13.488] (**) Option "xkb_model" "evdev"
[ 13.488] (**) Option "xkb_layout" "gb"
[ 13.488] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 13.489] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 13.489] (II) Using input driver 'evdev' for 'Power Button'
[ 13.489] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.489] (**) Power Button: always reports core events
[ 13.489] (**) Power Button: Device: "/dev/input/event1"
[ 13.489] (--) Power Button: Found keys
[ 13.489] (II) Power Button: Configuring as keyboard
[ 13.489] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 13.489] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 13.489] (**) Option "xkb_rules" "evdev"
[ 13.489] (**) Option "xkb_model" "evdev"
[ 13.489] (**) Option "xkb_layout" "gb"
[ 13.489] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 13.489] (II) No input driver/identifier specified (ignoring)
[ 13.489] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 13.489] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 13.489] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 13.489] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.489] (**) Logitech USB Receiver: always reports core events
[ 13.489] (**) Logitech USB Receiver: Device: "/dev/input/event5"
[ 13.489] (--) Logitech USB Receiver: Found keys
[ 13.489] (II) Logitech USB Receiver: Configuring as keyboard
[ 13.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input5/event5"
[ 13.489] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 13.489] (**) Option "xkb_rules" "evdev"
[ 13.489] (**) Option "xkb_model" "evdev"
[ 13.489] (**) Option "xkb_layout" "gb"
[ 13.490] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 13.490] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 13.490] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 13.490] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 13.490] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.490] (**) Logitech USB Receiver: always reports core events
[ 13.490] (**) Logitech USB Receiver: Device: "/dev/input/event6"
[ 13.490] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 13.490] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 13.490] (--) Logitech USB Receiver: Found relative axes
[ 13.490] (--) Logitech USB Receiver: Found x and y relative axes
[ 13.490] (--) Logitech USB Receiver: Found absolute axes
[ 13.490] (--) Logitech USB Receiver: Found keys
[ 13.490] (II) Logitech USB Receiver: Configuring as mouse
[ 13.490] (II) Logitech USB Receiver: Configuring as keyboard
[ 13.490] (II) Logitech USB Receiver: Adding scrollwheel support
[ 13.490] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 13.490] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 13.490] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input6/event6"
[ 13.490] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 10)
[ 13.490] (**) Option "xkb_rules" "evdev"
[ 13.490] (**) Option "xkb_model" "evdev"
[ 13.490] (**) Option "xkb_layout" "gb"
[ 13.490] (II) Logitech USB Receiver: initialized for relative axes.
[ 13.490] (WW) Logitech USB Receiver: ignoring absolute axes.
[ 13.490] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 13.490] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 13.490] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 13.490] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 13.490] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 13.490] (II) No input driver/identifier specified (ignoring)
[ 13.491] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 13.491] (II) No input driver/identifier specified (ignoring)
[ 13.491] (II) config/udev: Adding input device HDA Intel HP Out at Ext Left Jack (/dev/input/event10)
[ 13.491] (II) No input driver/identifier specified (ignoring)
[ 13.491] (II) config/udev: Adding input device HDA Intel HDMI/DP (/dev/input/event11)
[ 13.491] (II) No input driver/identifier specified (ignoring)
[ 13.491] (II) config/udev: Adding input device HDA Intel Mic at Ext Left Jack (/dev/input/event9)
[ 13.491] (II) No input driver/identifier specified (ignoring)
[ 13.491] (II) config/udev: Adding input device HP Webcam (/dev/input/event15)
[ 13.492] (**) HP Webcam: Applying InputClass "evdev keyboard catchall"
[ 13.492] (II) Using input driver 'evdev' for 'HP Webcam'
[ 13.492] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.492] (**) HP Webcam: always reports core events
[ 13.492] (**) HP Webcam: Device: "/dev/input/event15"
[ 13.492] (--) HP Webcam: Found keys
[ 13.492] (II) HP Webcam: Configuring as keyboard
[ 13.492] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input15/event15"
[ 13.492] (II) XINPUT: Adding extended input device "HP Webcam" (type: KEYBOARD, id 11)
[ 13.492] (**) Option "xkb_rules" "evdev"
[ 13.492] (**) Option "xkb_model" "evdev"
[ 13.492] (**) Option "xkb_layout" "gb"
[ 13.492] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 13.492] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 13.492] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 13.492] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 13.492] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.492] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 13.492] (--) AT Translated Set 2 keyboard: Found keys
[ 13.492] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 13.492] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 13.492] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 13.492] (**) Option "xkb_rules" "evdev"
[ 13.492] (**) Option "xkb_model" "evdev"
[ 13.492] (**) Option "xkb_layout" "gb"
[ 13.492] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event13)
[ 13.492] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 13.492] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 13.492] (II) LoadModule: "synaptics"
[ 13.493] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 13.506] (II) Module synaptics: vendor="X.Org Foundation"
[ 13.506] compiled for 1.11.0, module version = 1.5.0
[ 13.506] Module class: X.Org XInput Driver
[ 13.506] ABI class: X.Org XInput driver, version 13.0
[ 13.506] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 13.506] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 13.506] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 13.506] (**) Option "Device" "/dev/input/event13"
[ 13.813] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5456
[ 13.813] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4456
[ 13.813] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 13.813] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 13.813] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 13.813] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 13.813] (**) Option "TapButton1" "1"
[ 13.813] (**) Option "TapButton2" "2"
[ 13.813] (**) Option "TapButton3" "3"
[ 13.933] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 13.933] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 14.053] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event13"
[ 14.053] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 14.053] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 14.053] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 14.053] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[ 14.053] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 14.053] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 14.053] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 14.053] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 14.053] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 14.054] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 14.054] (II) No input driver/identifier specified (ignoring)
[ 14.054] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event12)
[ 14.054] (II) No input driver/identifier specified (ignoring)
[ 14.054] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 14.054] (II) No input driver/identifier specified (ignoring)
[ 14.054] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 14.054] (II) No input driver/identifier specified (ignoring)
[ 14.054] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event14)
[ 14.055] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 14.055] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 14.055] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.055] (**) HP WMI hotkeys: always reports core events
[ 14.055] (**) HP WMI hotkeys: Device: "/dev/input/event14"
[ 14.055] (--) HP WMI hotkeys: Found keys
[ 14.055] (II) HP WMI hotkeys: Configuring as keyboard
[ 14.055] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event14"
[ 14.055] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 14.055] (**) Option "xkb_rules" "evdev"
[ 14.055] (**) Option "xkb_model" "evdev"
[ 14.055] (**) Option "xkb_layout" "gb"
[ 14.079] (II) intel(0): EDID vendor "AUO", prod id 8764
[ 14.079] (II) intel(0): Printing DDC gathered Modelines:
[ 14.079] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz)
[ 14.079] (II) intel(0): Modeline "1366x768"x0.0 46.20 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (32.2 kHz)
[ 16.079] (II) intel(0): EDID vendor "AUO", prod id 8764
[ 16.079] (II) intel(0): Printing DDC gathered Modelines:
[ 16.079] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz)
[ 16.079] (II) intel(0): Modeline "1366x768"x0.0 46.20 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (32.2 kHz)
[ 16.141] (II) intel(0): EDID vendor "AUO", prod id 8764
[ 16.141] (II) intel(0): Printing DDC gathered Modelines:
[ 16.141] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (48.3 kHz)
[ 16.141] (II) intel(0): Modeline "1366x768"x0.0 46.20 1366 1404 1426 1436 768 771 777 803 -hsync -vsync (32.2 kHz)
[ 16.208] (II) intel(0): EDID vendor "AUO", prod id 8764
[ 16.208] (II) inte