Slow Susbend error in ASM instance

Hi.,
I am new to grid computing.Our system is build by grid computing now a days we are facing the Slow suspend Error in ASM instance.for this ASM is freezed and then we restart all Database and ASM instance in the particular node.After that its working very fine.we facing this problem very frequently ( weekly twice ).
Please help me on this.
Thanks & Regards
Karthick.

Are you saying it is not suspending at all [ are you using ALTER SYSTEM SUSPEND ? ] or just that it is doing it slowly ?
Either way probably best to raise a TAR ...... what errors are you getting ?

Similar Messages

Error at ASM instance creation - PRKS-1009

Hello all,
I am in the process of creating a 2 Node RAC database, on VMWare.
OS - RHEL 4 Oracle 10g
I have successfully installed the cluster. After this i was in the process of installing Oracle 10g Binaries.. which installed almost fine, until the time when i had to setup ASM storage options in the DBCA.
Unfortunately, my bad luck the computer rebooted after an automatic (windows update) *Remember i am using RHEL on VMWare server).
I had to unintall the binaries using the Oracle GUI... after that i removed all the files from db_1 folder.
I re-initiated the process of installing the db binaries, until the time i came to the asm option, there i got a prompt asking me to re-create the asm instance, which for which i clicked ok... here.. i got an error.
PRKS-1009 Failed to start ASM Instance "+ASM2" on node "rac2".
[CRS-1028: Dependency analysis failed because of.
[CRS-0233: Resource 'ora.rac2.ASM2.asm' has placement error.
There is one more issue i have, i am unable to use crs_stat command, each time it throws an error saying crs_stat command not found!!
Please guide...

Hello all,
I have managed to solve this problem.
The asm instances were running in the background even after uninstalling the binaries.
I removed the asm instances.
before that i stopped the asm instances.
/crs_stat -t
Stop instance name
crs_stop <output from crs_stat> asm 1
crs_stop <output from crs_stat> asm 2
srvctl remove asm -n rac1 -i +ASM1 -f
srvctl remove asm -n rac2 -i +ASM1 -f
then re-create the asm instance
Thanks!!

ORA-00488: RBAL process terminated with error causing ASM instance to crash

Hi Freinds,
I am manging a three node ASM cluster on 10g(10.2.0.2).Yesterday I observed one of the ASM instance got crashed .On reviewing the Alert log of crashed ASM instance I found
"*ORA-00488: RBAL process terminated with error*"
and subsequently
"*PMON: terminating instance due to error 488*".
I could restart the crashed instance without an issues but I want to know what kind of event could lead to such scenario.
I searched net and metalink but didn't found any helpful information.
Did any of you faced similar issues and do you have understanding why and when it happens.
Thanks in Advance
Arindam.

Hi,
There is bug reported on such issue, please check further on metalink if you have support.
Dilip Patel.

ASM instance crash due to error ORA-27506: IPC error connecting to a port

Hi All,
Today the ASM instance goes down.
When i checked the alert log I found the below error.
ORA-27506: IPC error connecting to a port
ORA-27300: OS system dependent operation:sendmsg failed with status: 22
ORA-27301: OS failure message: Invalid argument
ORA-27302: failure occurred at: sskgxpsnd1
Please find the environment details.
OS : RHEL-5
DB: 11.1.0.7 2-node RAC
I want to know the root cause of this issue.
Please suggest.
Thanks and Regards,

Hi,
Could you please upload cluster alert log and cssd.log?
regards,
Kishore

Error while starting ASM instance

when i was trying to startup my ASM database , i was getting the following error.
SQL> startup
ASM instance started
Total System Global Area 125829120 bytes
Fixed Size 2019000 bytes
Variable Size 98644296 bytes
ASM Cache 25165824 bytes
ORA-15032: not all alterations performed
ORA-15003: diskgroup "DBDATA" already mounted in another lock name space"
thnx in advance

Hi,
i was not aware of ASM anymore, i can give some more details of this.
There was already an instance named +ASM in the host, which has the diskgroup 'DBDATA' created.
But now i have created a new instance and i was trying to connect to the same diskgroup.
I dont have permission of the root, but i have the oracle login.
could u pleaze help me in this regard...
i need to connect to the diskgroup, if i try to stop the other instance, i was not getting the error, but the diskgroup is getting dis-mounted.
thnx alot for the replies

Getting error 'could not locate ASM instance' when make copy of ASM VM

Hi everyone,
I make virtual machine of OEL 5.7 with oracle 10.2.0.1 and successfully configured ASM instance. I am using vmware workstation.
Now when I make copy of this virtual machine and startup database, then I get the below error:
[oracle@oelinux ~]$ export ORACLE_SID=asmdb
[oracle@oelinux ~]$ sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sat Sep 29 01:10:26 2012
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+ASMGROUP/asmdb/spfileasmdb.ora'
*ORA-17503: ksfdopn:2 Failed to open file +ASMGROUP/asmdb/spfileasmdb.ora*
ORA-15077: could not locate ASM instance serving a required diskgroup
So how can i solve this problem??
Note: I copy this VM using both copy/paste and clone option, but get this error both times.
Regards,
Khurram Bhatti

EdStevens wrote:
Khurram Shehzad wrote:
I add 3 SCSI vmware disks. and then use them as a raw device. no ASMLib is used.
I refer below tutorial
[http://www.oracle-base.com/articles/10g/asm-using-asmlib-and-raw-devices.php]
That tutorial picks up after you created the disks.
How did you create the virtual disks attatched to your vm? What are its properties - from VMWorksation's perspective.
How did you create the "copy" of the vm?
It depends on how you actually created the disks, at the vm level, not the partitioning and formatting at the vm's OS level. I've used Tim's tutorials myself on some other ASM related projects, and he typically has you create the ASM disks as 'sharable', which would mean they would not copy necessarily copy with the vm. I've not played around the with variants much, but I'm pretty sure what you are seeing is a result of either the way the disk was created in the original vm, or the way you made the copy of the vm, or both.
Take a look at the machine properties of the two vms in the VMWorkstation control panel, looking at the HDD definitions. Compare and contrast.Hi EdStevens,
My problem resolved with below steps. Thanks fro your replies.
export ORACLE_SID=+ASM
sqlplus sys as sysdba
Connected to an idle instance.
SQL> startup mount
SQL> alter system register;
SQL> exit
[oracle@oelinux ~]$ export ORACLE_SID=asmdb
[oracle@oelinux ~]$ sqlplus sys as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Regards,
Khurram

Getting errors while starting ASM instance in 11gR2

Hi All,
While starting ASM instance, i'm getting the following errors.
[grid@xxxxx ~]$ . oraenv
ORACLE_SID = [+ASM2] ?
The Oracle base has been set to /u01/app/oracle
[grid@xxxxx ~]$ sqlplus "/ as sysasm"
SQL*Plus: Release 11.2.0.3.0 Production on Thu May 3 05:23:52 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected.
SQL> cl scr
SQL> shut immediate
ORA-00604: error occurred at recursive SQL level 1
ORA-04031: unable to allocate 32 bytes of shared memory ("shared pool","unknown object","KGLH0^37a71565","kglHeapInitialize:temp")
Please give me any suggestions?
--Thanks,

http://ora-04031.ora-code.com/
ORA-04031:
unable to allocate string bytes of shared memory ("string","string","string","string")
Cause:     More shared memory is needed than was allocated in the shared pool.
Action:     If the shared pool is out of memory, either use the dbms_shared_pool package to pin large packages, reduce your use of shared memory, or increase the amount of available shared memory by increasing the value of the INIT.ORA parameters "shared_pool_reserved_size" and "shared_pool_size". If the large pool is out of memory, increase the INIT.ORA parameter "large_pool_size".

ORA-12154: Error when connecting to asm instance

hi all, I am now facing new problem with asm of clusterware, I failed to connect to asm instance, there is how I did it:
sqlplus /nologSQL*Plus: Release 11.2.0.1.0 Production on Wed Jul 7 04:58:52 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect sys@+ASM as sysasm
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
I consider listener is correct configed.
lsnrctl statusLSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JUL-2010 08:51:49
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 05-JUL-2010 22:12:29
Uptime 1 days 6 hr. 39 min. 23 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File E:\app\11.2.0\grid\network\admin\listener.ora
Listener Log File e:\app\11.2.0\grid\log\diag\tnslsnr\rac1\listener\aler
t\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.110)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.112)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm2", status READY, has 1 handler(s) for this service...
Service "itpub" has 1 instance(s).
Instance "itpub2", status READY, has 1 handler(s) for this service...
Service "itpubXDB" has 1 instance(s).
Instance "itpub2", status READY, has 1 handler(s) for this service...
The command completed successfully
How to resolve the promblem? Best regards..

thank you for you kind.. I forgot it... but after I modify tnsname.ora, Error number changed..
tnsname.ora:
# tnsnames.ora Network Configuration File: E:\oracle\product\11.2.0\dbhome_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ITPUB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac-cluster-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = itpub)
+ASM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = rac-cluster-scan)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = +ASM)
*>sqlplus /nolog*
SQL*Plus: Release 11.2.0.1.0 Production on Wed Jul 7 12:50:07 2010
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> connect sys@+asm as sysasm
Enter password:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
SQL>
tnsping +asmTNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 07-JUL-2
010 12:51:09
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
E:\oracle\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = rac-clus
ter-scan)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = +as
m)))
OK (20 msec)

ASM instance on one node can not startup

use dbca create database failure
[oracle@rac1 ~]$ dbca -silent -responseFile /home/oracle/dbca.rsp
Look at the log file "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log" for further details.
[oracle@rac1 ~]$ cat "/opt/ora/product/10.2.0/db_1/cfgtoollogs/dbca/mydb.log"
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]
ORA-03135: connection lost contact
[oracle@rac2 bin]$ ./crs_stat -t
Name           Type           Target    State     Host
ora....SM1.asm application    ONLINE    ONLINE    rac1
ora....C1.lsnr application    ONLINE    ONLINE    rac1
ora.rac1.gsd   application    ONLINE    ONLINE    rac1
ora.rac1.ons   application    ONLINE    ONLINE    rac1
ora.rac1.vip   application    ONLINE    ONLINE    rac1
ora....SM2.asm application    ONLINE    OFFLINE
ora....C2.lsnr application    ONLINE    ONLINE    rac2
ora.rac2.gsd   application    ONLINE    ONLINE    rac2
ora.rac2.ons   application    ONLINE    ONLINE    rac2
ora.rac2.vip   application    ONLINE    ONLINE    rac2so i try to start asm instance on rac2
[oracle@rac2 bin]$ ./srvctl start asm -n rac2
PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
rac2:ora.rac2.ASM2.asm:SQL> Disconnected
rac2:ora.rac2.ASM2.asm:
CRS-0215: Could not start resource 'ora.rac2.ASM2.asm'.]]
[PRKS-1009 : Failed to start ASM instance "+ASM2" on node "rac2", [rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL*Plus: Release 10.2.0.1.0 - Production on Mon Jul 25 17:58:21 2011
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Copyright (c) 1982, 2005, Oracle. All rights reserved.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:Enter user-name: Connected to an idle instance.
rac2:ora.rac2.ASM2.asm:
rac2:ora.rac2.ASM2.asm:SQL> ORA-03113: end-of-file on communication channel
rac2:ora.rac2.ASM2.asm:SQL> Disconnected
rac2:ora.rac2.ASM2.asm:check the alert log find
Mon Jul 25 17:58:23 2011
Maximum Tranmission Unit (mtu) of the ether adapter is different
on the node running instance 1, and this node.
Ether adapters connecting the cluster nodes must be configured
with identical mtu on all the nodes, for Oracle.
Please ensure the mtu attribute of the ether adapter on all
nodes are identical, before running Oracle.
Mon Jul 25 17:58:23 2011
Errors in file /opt/ora/admin/+ASM/bdump/+asm2_lmon_29711.trc:
ORA-27550: Target ID protocol check failed. tid vers=%d, type=%d, remote instance number=%d, local instance number=%d
LMON: terminating instance due to error 27550
Mon Jul 25 17:58:25 2011
Shutting down instance (abort)
License high water mark = 0
Mon Jul 25 17:58:28 2011
Instance terminated by LMON, pid = 29711
Mon Jul 25 17:58:30 2011
Instance terminated by USER, pid = 29831and i checked my eth
[root@rac1 oracle]# ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:0C:29:3C:42:0C
          inet addr:192.168.40.102 Bcast:192.168.40.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:9762 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6028 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1193646 (1.1 MiB) TX bytes:1037252 (1012.9 KiB)
          Interrupt:67 Base address:0x2400
eth0:1    Link encap:Ethernet HWaddr 00:0C:29:3C:42:0C
          inet addr:192.168.40.201 Bcast:192.168.40.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          Interrupt:67 Base address:0x2400
eth1      Link encap:Ethernet HWaddr 00:0C:29:3C:42:16
          inet addr:10.10.17.221 Bcast:10.10.17.225 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:30185 errors:0 dropped:0 overruns:0 frame:0
          TX packets:37936 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:19988844 (19.0 MiB) TX bytes:35126056 (33.4 MiB)
          Interrupt:51 Base address:0x2480
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:52537 errors:0 dropped:0 overruns:0 frame:0
          TX packets:52537 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4380651 (4.1 MiB) TX bytes:4380651 (4.1 MiB)
[root@rac2 ~]# ifconfig -a
eth0      Link encap:Ethernet HWaddr 00:0C:29:9C:CC:90
          inet addr:192.168.40.103 Bcast:192.168.40.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:3665 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1489 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:563952 (550.7 KiB) TX bytes:243127 (237.4 KiB)
          Interrupt:67 Base address:0x2400
eth0:1    Link encap:Ethernet HWaddr 00:0C:29:9C:CC:90
          inet addr:192.168.40.202 Bcast:192.168.40.255 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          Interrupt:67 Base address:0x2400
eth1      Link encap:Ethernet HWaddr 00:0C:29:9C:CC:9A
          inet addr:10.10.17.222 Bcast:10.10.17.225 Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:38281 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29683 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:35182270 (33.5 MiB) TX bytes:19905266 (18.9 MiB)
          Interrupt:51 Base address:0x2480
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:44387 errors:0 dropped:0 overruns:0 frame:0
          TX packets:44387 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2299383 (2.1 MiB) TX bytes:2299383 (2.1 MiB)any idea ?
i try to run dbca on rac2 ,it seems OK
============
ASM instance still have problem,no ASM instance create in rac1
[oracle@rac2 bin]$ ./crs_stat -t
Name           Type           Target    State     Host
ora.mydb.db    application    ONLINE    ONLINE    rac1
ora....b1.inst application    ONLINE    OFFLINE
ora....b2.inst application    ONLINE    ONLINE    rac2
ora....SM1.asm application    ONLINE    OFFLINE
ora....C1.lsnr application    ONLINE    ONLINE    rac1
ora....C2.lsnr application    ONLINE    OFFLINE              => ora.rac1.LISTENER_RAC2.lsnr   (i do not know where this resource come from ??)
ora.rac1.gsd   application    ONLINE    ONLINE    rac1
ora.rac1.ons   application    ONLINE    ONLINE    rac1
ora.rac1.vip   application    ONLINE    ONLINE    rac1
ora....SM2.asm application    ONLINE    ONLINE    rac2
ora....C2.lsnr application    ONLINE    ONLINE    rac2
ora.rac2.gsd   application    ONLINE    ONLINE    rac2
ora.rac2.ons   application    ONLINE    ONLINE    rac2
ora.rac2.vip   application    ONLINE    ONLINE    rac2and here is my dbca.rsp file content
[GENERAL]
RESPONSEFILE_VERSION = "10.0.0"
OPERATION_TYPE = "createDatabase"
[CREATEDATABASE]
GDBNAME = "mydb.us.oracle.com"
SID = "mydb"
NODELIST=rac1,rac2
TEMPLATENAME = "/home/oracle/mydb.dbc"
SYSPASSWORD = "Myss123456"
SYSTEMPASSWORD = "Myss123456"
EMCONFIGURATION = "NONE"
DBSNMPPASSWORD = "Myss123456"
STORAGETYPE=ASM
DISKLIST=/dev/oracleasm/disks/VOL1,/dev/oracleasm/disks/VOL2
DISKGROUPNAME=ORADG
REDUNDANCY=EXTRENAL
DISKSTRING="/dev/oracleasm/disks/*"
ASM_SYS_PASSWORD="Myss123456"
LISTENERS = "listener1 listener2"Edited by: 859340 on 2011-7-24 下午7:23
Edited by: 859340 on 2011-7-24 下午7:32
Edited by: 859340 on 2011-7-24 下午7:35
Edited by: 859340 on 2011-7-24 下午7:51

Hi,
Use this tech note on MOS.
*Instance Crash on startup with ORA-27550: Target ID protocol check failed [ID 730516.1]*
Regards,
Levi Pereira

ASM instances on 2 node Oracle RAC 10g r2 on Red Hat 4 u1

Hi all
I'm experiencing a problem in configuring diskgroups under +ASM instances on a two node Oracle RAC.
I followed the official guide and also official documents from metalink site, but i'm stuck with the visibility of asm disks.
I created fake disks on nfs with Netapp certified storage binding them to block device with the usual trick "losetup /dev/loopX /nfs/disk1 " ,
run "oracleasm createdisk DISKX /dev/loopX" on one node and
"oracleasm scandisks" on the other one.
With "oracleasm listdisks" i can see the disks at OS level in both nodes , but , when i try to create and mount diskgroup in the ASM instances , on the instance on which i create the diskgroup all is well, but the other one doesn't see the disks at all, and diskgroup mount fails with :
ERROR: no PST quorum in group 1: required 2, found 0
Tue Sep 20 16:22:32 2005
NOTE: cache dismounting group 1/0x6F88595E (DG1)
NOTE: dbwr not being msg'd to dismount
ERROR: diskgroup DG1 was not mounted
any help would be appreciated
thanks a lot.
Antonello

I'm having this same problem. Did you ever find a solution?

Create a new user for oracle 10G ASM instance with sysdba system privilege

Hi,
In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to connnect to ASM instance.
I'm getting the error message "ORA-01109: database not open",When I tried to create a new user using the below the steps in oracle 10g ASM instance
1. Login using "sqlplus / as sysdba"
2. Create user <username> identified by <password>;
But in oracle 11g ASM instance, I'm able to create new user by connecting the ASM instance with SYSASM role without issues.
Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
Thanks in advance .

Hi,
Recreate the password file for the ASM instance as follows:
Unix:
orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
Windows:
orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
SQL> create user ASMDBA identified by test01;
User created.
SQL> grant SYSASM, SYSOPER to ASMDBA;
Grant succeeded.
SQL> select * from v$pwfile_users;
USERNAME SYSDBA SYSOPE SYSASM
SYS TRUE TRUE TRUE
ASMDBA FALSE TRUE TRUE
Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
Thank you

Create space in ASM Instance

Dear All,
Here is the configuration we have:
Primary Database: Oracle RAC (2 Nodes). 11g R1 RAC, 10g R2 Database using ASM (OS: Windows Server 2003)
Data Guard: 10g R2 Database using ASM (OS: Windows Server 2003)
We are getting the following errors in the alert log file of ASM Instance (Data Guard) - Data Gaurd mode is 'Max Performance':
ORA-00270: error creating archive log +DG_DATAFILES_AND_FB/accelastdby/primary_arch_logs/arc32471_0721252017.002
ORA-19504: failed to create file "+DG_DATAFILES_AND_FB/accelastdby/primary_arch_logs/arc32471_0721252017.002"
ORA-17502: ksfdcre:4 Failed to create file +DG_DATAFILES_AND_FB/accelastdby/primary_arch_logs/arc32471_0721252017.002
ORA-15041: diskgroup space exhausted
Uopn checking the disk group DG_DATAFILES_AND_FB, free space is 0.
What are the possible options to create more space on this disk group? Can we delete some files safely without any impact (for example: Archive logs which have been applied to database)?
Thanks for your advice.
Regards,
Muhammad Riaz

Hi,
First you can add more disks to the diskgroup so you can get more space, ASM will do rebalance once new disks added.
Second, It seems that your archivelog in dataguard were not deleted after being applied. You can delete the applied archivelog in dataguard, use RMAN is the best option
Hope this helps
Cheers
FZheng

Unable to create ASM instance in Sol 10 with oracle 10g

Hi
I am trying to create ASM instance in oracle 10g, getting an error will try to add localconfig add command
"bash-3.00# /export/home/oracle/oracle/product/10.2.0/db_1/bin/localconfig add reset
Failure at scls_scr_create with code 1
Internal Error Information:
Category: 1234
Operation: scls_scr_create
Location: mkdir
Other: Unable to make user dir
Dep: 2
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
/etc/init.d/init.cssd: /var/opt/oracle/scls_scr/Sun/root/cssrun: cannot create
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started "
initcssd has been installed and unable to start also getting an error
# svcs -x svc:/system/initcssd:default
svc:/system/initcssd:default (system activity reporting package)
State: maintenance since Wed Nov 16 10:39:29 2011
Reason: Start method failed repeatedly, last exited with status 2.
See: http://sun.com/msg/SMF-8000-KS
See: sar(1M)
See: /var/svc/log/system-initcssd:default.log
Impact: This service is not running.
Can some please help me to create this instance, alos need a initcssd.zip file for 10g

Hi thanks,
I have passed more steps, CSS is started after changing the hostname, after that I created two drive and mounted properly
when I try to create a ASM disk its failing with following error and idea
SQL> CREATE DISKGROUP DB_DATA NORMAL REDUNDANCY
2 FAILGROUP controller1 DISK '/dev/dsk/c0d1s0'
3 FAILGROUP controller2 DISK '/dev/dsk/c1d1s0';
CREATE DISKGROUP DB_DATA NORMAL REDUNDANCY
ERROR at line 1:
ORA-15018: diskgroup cannot be created
ORA-15031: disk specification '/dev/dsk/c1d1s0' matches no disks
ORA-15025: could not open disk '/dev/dsk/c1d1s0'
ORA-15056: additional error message
Intel SVR4 UNIX Error: 13: Permission denied
Additional information: 42
Additional information: 134497888
Additional information: -809278080
ORA-15031: disk specification '/dev/dsk/c0d1s0' matches no disks
ORA-15025: could not open disk '/dev/dsk/c0d1s0'
ORA-27037: unable to obtain file status
Intel SVR4 UNIX Error: 25: Inappropriate ioctl for device
Additional information: 16
Additional information: 134497888
Additional information: -809278080

Soft I/O error in ASM disk volume when using iostat commmand

Dear All,
We are having 2 node 11g rac/sun solaris 10/ASM storage, when we using iostat in node 2 getting soft I/O error keep on increasing.
s/w h/w trn tot device
*82 0 0 82 c4t600A0B80006766CD000003DF4B20A7FCd0*
s/w h/w trn tot device
0 0 0 0 md/d10
0 0 0 0 md/d11
0 0 0 0 md/d12
0 0 0 0 md/d20
0 0 0 0 md/d21
0 0 0 0 md/d22
0 0 0 0 md/d30
0 0 0 0 md/d31
0 0 0 0 md/d32
0 0 0 0 md/d40
0 0 0 0 md/d41
0 0 0 0 md/d42
0 0 0 0 md/d50
4 0 2 6 c0t0d0
0 0 0 0 c1t2d0
0 0 0 0 c1t0d0
0 0 0 0 c1t4d0
0 0 0 0 c1t1d0
2 0 0 2 c3t203200A0B86766CDd31
0 0 0 0 c4t600A0B80006766CD000003E14B20C891d0
40 0 0 40 c4t600A0B80006766CD000003DF4B20A7FCd0
0 0 0 0 c4t600A0B80006766CD000003DD4B20A57Fd0
0 0 0 0 c4t600A0B80006766CD000003C34B0D2D31d0
2 0 0 2 c4t600C0FF0000000000859635DB0097B00d0
2 0 0 2 c4t600C0FF000000000085963724A889B00d0
2 0 0 2 c4t600C0FF0000000000859635AFC5A7F02d0
2 0 0 2 c4t600C0FF0000000000859635AFC5A7F01d0
2 0 0 2 c4t600C0FF0000000000859635AFC5A7F00d0
2 0 0 2 c2t202200A0B86766CDd31
0 0 0 0 c4t600A0B80006766CD000052274FD0B057d0
1 0 0 1 c4t600C0FF0000000000859635DB0097B02d0
2 0 0 2 c4t600C0FF000000000085963565767D300d0
2 0 0 2 c4t600C0FF00000000008596326C5F42901d0
1 0 0 1 c4t600C0FF00000000008596326C5F42900d0
1 0 0 1 c2t203300A0B86766CDd31
0 0 0 0 proddb2.zakathouse.org:vold(pid672)
please advice me how to troubshoot and fix this error
Thanks & Regards

Hi,
I suggest to have a look at following script which is provided by oracle to monitor IO.
ASMIOSTAT Script to collect iostats for ASM disks [ID 437996.1]
Further this i have questions
1) Are you logged in asm sysasm? Make sure that you have proper rights
2) Did you check the liveness of asm instance? Make sure its up and functional also check the asm alert.log for awareness.
Hope this helps

ASM instance wont mount diskgroup..

HI, I have 10g release 2 installed on CENTOS 4.4, I use ASM striping with with 4 raw disks.
I had a system crash due to a power failure and now the the ASM wont mount the diskgroup.
export $ORACLE_HOME=+ASM
SQL> startup mount;
ASM instance started
Total System Global Area 130023424 bytes
Fixed Size 2071000 bytes
Variable Size 102786600 bytes
ASM Cache 25165824 bytes
ORA-15110: no diskgroups mounted
SQL> alter diskgroup RESEARCH1 mount;
alter diskgroup RESEARCH1 mount
ERROR at line 1:
ORA-15032: not all alterations performed
ORA-15063: ASM discovered an insufficient number of disks for diskgroup
"RESEARCH1"
now when I use /etc/init.d/oracleasm listdisks I can see all my disks:
DISK1
DISK2
DISK3
DISK4
then i tried to change asm_diskstring to point the mounting point, here is my ora file:
*.asm_diskgroups='RESEARCH1'
+ASM.asm_diskgroups='RESEARCH1' #Manual Dismount
*.asm_diskstring='/dev/oracleasm/disks'
*.background_dump_dest='/home/oracle/product/10.2.0/db_1/admin/+ASM/bdump'
*.core_dump_dest='/home/oracle/product/10.2.0/db_1/admin/+ASM/cdump'
*.instance_type='asm'
*.large_pool_size=12M
*.remote_login_passwordfile='EXCLUSIVE'
*.user_dump_dest='/home/oracle/product/10.2.0/db_1/admin/+ASM/udump'
any ideas?
Thanks
Assaf

Hi,
by oracleasm lib utility you can configure as below
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Thanks

Slow Susbend error in ASM instance

Similar Messages

Maybe you are looking for