Slow System and cost to take to local store

Hey All,
My system has been running slow recently and I'm not sure why. I was thinking of taking it to my local store but do they charge a huge fee to help?

FaithPlatform wrote:
I would recommend you use a Anti virus software to scan for any virus, is there is no luck with that, personally (I am saying this because it's what I would do) I would backup any/all important documents and run a fresh install of OS X Yosemite.
Please, nobody follow this horribly bad advice!
Malware is almost never the cause of performance issues on a Mac, while anti-virus software often is the cause. Further, if this one thing didn't help (which it wouldn't), it makes no sense whatsoever to jump straight to reinstalling the system! There are many other things that should be tried first, such as removing certain kinds of third-party software (anti-virus being one of the top candidates), checking for low RAM problems, checking for problems due to insufficient hard drive space, etc.
Buckeyes1205, Apple's techs should be able to help you. If you're not able to get in to the Apple Store right away, though, you could download EtreCheck, run it and then post the report it generates here. That will give us more information about what's going on with your system, and we can give you some real suggestions for how to fix it.
http://www.etresoft.com/etrecheck

Similar Messages

Slow system and application startup times

Hi,
I've got a 17" Macook Pro (Early 2011) 2.2 GHz Intel Core i7 - ever since I bought it I feel like it runs a little slow.
I've been a long-time mac used but I feel a little disappointed with this machine.
e.g.: Startup time takes around 4 minutes.
Applications take around 10 seconds to start.
Chrome sometimes takes 5-10 seconds to start, about the same to quit.
My Xbench scores fluctuate wildly - best I've ever got is 220, worst is 18. 160 is about the average.
http://db.xbench.com/merge.xhtml?doc2=526647
http://db.xbench.com/merge.xhtml?doc2=537725
http://db.xbench.com/merge.xhtml?doc2=544252
I feel that tried everything including:
- Creating a new user
- Repairing disk permissions
- DIsk verify and repair
- Removing all startup items
- Installing extra ram (currently at 8GB)
It runs well most of the time but frustratingly slow sometimes and there doesn't seem to be any anomalous activity in activity monitor. I feel that it could be the hard disk, but don't know (I always have 250-350gb free).
Any help appreciated!

Thanks for the link. I've never seen that page before but I have done everything in that list.
It's not a spinning beachball issue - the system doesn't lock-up often it just takes a **** long time to do some things. I didn't really realise it as a problem until I started using other people's older/lower spec'ed macs and noticed that they run FASTER than mine.
Activity monitor pics - just after a restart with my usual apps running:
CPU https://skitch.com/e-hellodaniel/83pq5/activity-monitor
Memory https://skitch.com/e-hellodaniel/83pq7/activity-monitor
Disk https://skitch.com/e-hellodaniel/83pxg/activity-monitor
Even using Skitch to take those screenshots took ages.
It's almost like the disk or CPU is throttled back or bottlenecked, and always has been...

Cost rates maintained in ERP system and cost elements from PPM 5.0

Hello experts,
I will appreciate it if you could help me with this subject below.
I want to search in ERP system what cost rates are maintained for each approved worked hour in PPM system. But, I do not know where should I look for this.
I take a look on the report of the created internal order:
You can see, that the actual posting of 25.000 is booking in the ERP PROD system on cost element IT-HOURS
When I display the booked working times I find 5 Hours taht I booked on my personnel number on Internal Order :
I want to know where in the system is maintained the cost rate that calculates automatically the 5 hours booked on cost element IT-HOURS to 25.000 . So each hour costs 5.000. I want to change the amount of each hour from 5000 to 50.
I’m not an ERP expert so I don’t know where such rate can be maintained in ERP. I need your expert help!
Thanks a lot,
Ruxandra P.

Hi Ruxandra!
You have to distinguish plan costs from actual costs. By doing time confirmation (e.g. via CATS) on your internal order the system posts actual costs.
Using the Role concept of PPM (role-based or task-based) you are dealing (generally spoken) with plan costs. Derived from your entry message I suppose you are already using accounting integration.
Accounting Integration is a big topic, that is very difficult to generally describe in a posting. Please have a look to the general information in help.sap.com => General Information About Accounting Integration - SAP Portfolio and Project Management - SAP Library
Please beware: There are many accounting integration scenarios, therefore there are several aspects and places to maintain cost/revenu rates. On the PPM UI you have the possibility to maintain differing cost/revenu-rates per role/task.The rates in general (plan and actuals) are maintained in KP26.
Also have a look to your business partner (role-based scenario), if there is a cost/revenu rate.
For time confirmation you can have a look to PA30 => infotype 0315 for your CATS suggestion values (activity type, costcenter, etc...).
Please come back with any detailed questions, you would like to have answered.
Regards,
Peter

Slow system and plist

My system started slowing down and having gone through the forum,I deleted the plist list files. On deleting the files, I discovered that my settings have changed and has deleted my emails! Can I restore the settings and my emails?

HI,
Deleting the Safari .plist file has not effect on your e-mail.
Can I restore the settings and my emails?
You can restore from a backup using TimeMachine.
Carolyn

Installed OS X Maverick on Macs...having problems slower system and apps freezing

I installed and downloaded OS X Maverick last week and installed it in relatively new Macbook Pro and IMac...both purchased last year...have experienced applications freezing, slower start up time several times, once was unable to start my Macbook Pro...had to reboot..and slower system response...anyone else experiencing the same?

Checked to see how much space is available ??
Click your Apple menu  top left in your screen. From the drop down menu click About This Mac > More Info > Storage. Make sure there's at least 15% free disk space.
As for slow startup, delete all apps in System Preferences > Users & Groups > Login Items
Same for HD > Library > StartupItems
Anti virus software can slow your Macs down if installed.

Slow system and too many details after upgrading to OS/Lion

This MacBook Pro is my right hand, I was doing so great with Snow Leopard, Now everything takes twice longer. I cleaned up, reseted, reinstalled softwares, etc. same.
Too many details that doesn't work correctly.
-Safari constantly needs to be loading. Some times Firefox.
The track pad cant keep open a display box with a long list, once you try to scroll down.
-Preview, i used this app a lot, safe me time, DUPLICATE? instead of SAVE, i don't see the purpose. After editing images and safe them, gamma, color patterns and light appear distortion.
-iTunes volume doesn't comeback after using Skype or another app, remains low.
-Airport takes a bit longer to find a local network.
-There is not an extra space for the left and right scroll bottom on the finder window, sometimes this one disappear but mostly remains which makes it pretty tricky to open the last file at the bottom of the list. because the scroller is on front.
-External Drives, takes longer to connect or disconnect them.
Suggestions before i reinstall Snow Leopard.

guizz,
it sounds like you have come across the mother of all problems but i would like to help as much as i can.
first of all, i noticed that it took a few days after installing lion before my system was back to the full stride it had while running snow leopard give it some time and a few updates and lion should speed up because components such as ram take time to adjust.
the duplicate thing in preview is a new thing that came out with versions, one of the many new features in lion. i think it takes the place of the SAVE AS... command and you should still be able to save using the old command-s keystroke however part of lion includes an autosave feature so you really never have to worry about saving your work.
i personally cannot speak for safari or firefox even though i have both because i use google chrome as my web browser you can always give that a try.
in the system preferences under the general settings option you can change how the scroll bar is displayed on the screen.
i would suggest searching for other people who have had similar problems with itunes to try and find an answer
as for everything else your system may just need time to adjust to lion
good luck hope this helped a little

Slow system and applications.

Hello everybody!
I have macbook pro which I bought 8 months ago and I have a mac universal which I bought 5 years ago. I usually use my macbooks for online research, pages, keynote and numbers. Besides that I dont do something special. But lately both my macbooks are running very slow and most of the time I have pop-ups on the safari or on firefox. I have an application which name is mackeeper to speed up my both macbook but It seems like it doesnt do anything. I am trying to learn more about macbook. What kind of applications that I have to use for speed up for my macbooks? Or what should I do? Please let me know I would like to learn more about Mac.
(my both macbooks are up to date)
Thank you so much!

Hi Dibenkorn, first of all thank you so much for your time!! this report belongs to my macbook universal one! I dont have the BBM application but I believe I still have its root under my data! What should I do? How I can delete all those 3rd party links!!!
Hardware Information:
          MacBook (13-inch, Mid 2010)
          MacBook - model: MacBook7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          2 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
System Software:
          OS X 10.9.1 (13B42) - Uptime: 1 day 17:48:1
Disk Information:
          TOSHIBA MK2555GSXF disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Untitled (disk0s2) / [Startup]: 249.2 GB (108.13 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          MATSHITADVD-R   UJ-898
USB Information:
          Apple Inc. Built-in iSight
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.rim.driver.BlackBerryUSBDriverInt          (0.0.67)
Launch Daemons:
          [System] com.adobe.fpsaud.plist 3rd-Party support link
          [System] com.google.keystone.daemon.plist 3rd-Party support link
          [System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
          [System] com.rim.BBDaemon.plist 3rd-Party support link
          [System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
Launch Agents:
          [System] com.google.keystone.agent.plist 3rd-Party support link
          [System] com.hp.productresearch.plist 3rd-Party support link
          [System] com.oracle.java.Java-Updater.plist 3rd-Party support link
          [System] com.rim.BBLaunchAgent.plist 3rd-Party support link
User Launch Agents:
          [not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
          [not loaded] com.akamai.client.plist 3rd-Party support link
          [not loaded] com.akamai.single-user-client.plist 3rd-Party support link
          [not loaded] com.facebook.videochat.[redacted].plist 3rd-Party support link
          [not loaded] com.intego.virusbarrierexpress.agent.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist 3rd-Party support link
          [not loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist 3rd-Party support link
User Login Items:
          BlackBerry Device Manager
Internet Plug-ins:
          o1dbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          Google Earth Web Plug-in: Version: 6.0 3rd-Party support link
          Default Browser: Version: 537 - SDK 10.9
          AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          FlashPlayer-10.6: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          Silverlight: Version: 5.1.10411.0 - SDK 10.6 3rd-Party support link
          Flash Player: Version: 12.0.0.70 - SDK 10.6 3rd-Party support link
          QuickTime Plugin: Version: 7.7.3
          googletalkbrowserplugin: Version: 5.1.4.17398 3rd-Party support link
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 3rd-Party support link
          AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
          GarminGpsControl: Version: 2.9.3.0 Release 3rd-Party support link
          JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Safari Extensions:
          SafariRestore: Version: 6.0.1
          Facebook Improved: Version: 1.8
          Reload Button: Version: 1.2
          Cloudy: Version: 1.4
          Social Fixer: Version: 7.501
          Translation Window: Version: 1.7
          Turn Off the Lights: Version: 2.3.0.5
          Duplicate Tab Button: Version: 2.0
          Better Facebook: Version: 5.941
          fb: Version: 1.0
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
          Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
          TuneUp Visualizer: Version: 2.2.0 3rd-Party support link
User Internet Plug-ins:
          Unity Web Player: Version: UnityPlayer version 2.6.1f3 3rd-Party support link
3rd Party Preference Panes:
          Akamai NetSession Preferences 3rd-Party support link
          Flash Player 3rd-Party support link
          Java 3rd-Party support link
Old Applications:
          /Developer/Applications/Graphics Tools
          /Applications/iWork '09
          MacFamilyTree:          Version: 6.2.9 - SDK 10.5 3rd-Party support link
          SLLauncher:          Version: 1.0 - SDK 10.5 3rd-Party support link
                    /Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Untitled: Disk size: 232.09 GB Disk used: 131.38 GB
          Destinations:
                    G-DRIVE slim [Local] (Last used)
                    Total size: 465.44 GB
                    Total number of backups: 2
                    Oldest backup: 2012-08-28 00:34:40 +0000
                    Last backup: 2012-11-07 17:42:44 +0000
                    Size of backup disk: Adequate
                              Backup size 465.44 GB > (Disk used 131.38 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
          /sbin excluded from backup!
          /usr excluded from backup!
          /System excluded from backup!
          /bin excluded from backup!
          /private excluded from backup!
          /Library excluded from backup!
          /Applications excluded from backup!
Top Processes by CPU:
               6%          MacFamilyTree
               5%          WindowServer
               1%          EtreCheck
               0%          BBLaunchAgent
               0%          aosnotifyd
Top Processes by Memory:
          209 MB          com.apple.WebKit.Networking
          104 MB          com.apple.WebKit.WebContent
          104 MB          Safari
          63 MB          MacFamilyTree
          59 MB          Finder
Virtual Memory Information:
          39 MB          Free RAM
          639 MB          Active RAM
          590 MB          Inactive RAM
          362 MB          Wired RAM
          2.16 GB          Page-ins
          191 MB          Page-outs

Slow system and odd startup icon

If I'd only changed one variable at a time then I'd probably not be asking this question... but since I changed so many here goes:
About the same time as upgraded to 10.4.8 I added a third internal drive (first one in the slower drive area near the front of my MDD G4) and installed the newest iLife suite.
My system has slowed down amazingly... just trying to activate Finder to look at a file list, changing an active selection from Mail to Safari, opening most any app... causes a 5 to 10 second spinning beach ball.
My only clue is a momentarily new symbol when I restart the CPU: Prior to the launching of the normal Apple screen I see a small folder that alternates with a question mark for just a second or two. Then startup proceeds normally. I thought that icon was for a problem finding the startup drive, but I've not changed where the system resides or that drive at all.
Any thoughts would be greatly appreciated,
Pat

Did you also update your iLife apps and QuickTime? And did you repair permissions? Two things to do to see if you can find the source of the slow down:
1. Create a test user using System Preferences->Accounts. Leave the test user basically as it is created, don't add contextual menus, menu extras, fonts, nothing extra. Try logging into the test user and see if the responsiveness is back to normal. If so the problem is something in your usual account rather than a system level problem.
2. Try launching Console from your utilities folder and leave it running in the background. Are you getting any odd error messages?
Also check to see if the drives are set to sleep when possible, make sure the check box is UNchecked in System Prefs->Energy Saver. Usually though the slow down when that is checked is intermittant rather than constant.
Francine
Francine
Schwieder

Slow System and Failure Messages

I am working on a project, and Captivate keeps slowing down/quitting on me. What is the next step @AdobeCommunity?
I was working with adjusting audio in my 62 slide presentation, off the local server, had been clearing the cache, and saving as I went. After two particularly slow saves with lengthy "not responding" messages (we are talking 4-5 minutes until I recieved a response), I closed Captivate and restarted my computer. The following are all of the error screens.

When you write "off the local server" does that mean that you worked on the project file while it was located on a server? If yes, then that is most likely the problem. Captivate does not play nice with networks.
If you are in a corporate environment with roaming profiles etc. you should also ensure that your project cache etc. are not synched with the server. Read this article for more info: http://www.cpguru.com/setting-up-adobe-captivate-6-in-a-corporate-environment/
/Michael
www.cpguru.com - Adobe Captivate Widgets, Tutorials, Tips and Tricks and much more..

Wht is Message system and XI Aapter?

Hi Experts,
I've came across a scenario /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi which explains "message flow in XI".
Q1. my question is under "RETURN JOURNEY" section in Point 1. the author is saying "So the XI Integration server will send the message to the messaging system of the Adapter Engine (AE)" i want to know what is message system and its purpose? will it store converted messages.
Q2. wht does an XI Adapter do and wht is the purpose of using it?
need explanations not any references to SAP Help
thanks
Faisal
points will b rewarded for useful answers.....

Hi,
Q1. my question is under "RETURN JOURNEY" section in Point 1. the author is saying "So the XI Integration server will send the message to the messaging system of the Adapter Engine (AE)" i want to know what is message system and its purpose? will it store converted messages
Here Messaging System means evevry Processed message Should get through into Messaging System of AE before Delivering to Target Application.
In Messaging System we can see the delivered Messages and to be deliver messages.
If the channel is inactive , it will error out in Integration Engine itself, so u can restart those messages manually.
Also, lets say the receiver system is not reachable(example JDBC), then what happens? You can find those messages in
http://host:port/MessagingSystem/monitor/monitor.jsp . In the window left frame choose Received Messages , in the right frame choose Status Not Delivered. Change the time frame and click tab(there is no enter) , u can find list of messages. Now for each message u can find two options Delete, Re-Deliver ,click on Re-Deliver the message, it will go thru.
Q2. wht does an XI Adapter do and wht is the purpose of using it?
Here if u observe first message pick up by Sender CC get through AE. Then the converted XML message will be delivered to IE for further process
Here we use XI Adapter to Communicate IE with IS internally.
Regards
Seshagiri

Messaging system and XI Adapter

Hi Experts,
I've came across a scenario /people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi which explains "message flow in XI".
Q1. my question is under "RETURN JOURNEY" section in Point 1. the author is saying "So the XI Integration server will send the message to the messaging system of the Adapter Engine (AE)" i want to know what is message system and its purpose? will it store converted messages.
Q2. wht does an XI Adapter do and wht is the purpose of using it?
thanks
Faisal
points will b rewarded for useful answers.....

Hi Abdul,
Q1. my question is under "RETURN JOURNEY" section in Point 1. the author is saying "So the XI Integration server will send the message to the messaging system of the Adapter Engine (AE)" i want to know what is message system and its purpose? will it store converted messages.
http://help.sap.com/saphelp_nw04s/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/frameset.htm
Purpose
You use the Adapter Engine to connect the Integration Engine to SAP systems (RFC adapter) and external systems. You use the various adapters in the Adapter Engine to convert XML- and HTTP-based messages to the specific protocol and format required by these systems, and the other way around.
Q2. wht does an XI Adapter do and wht is the purpose of using it?
Purpose
You configure the XI adapter to exchange messages with an Integration Engine. Both XI 3.0 and XI 2.0 message protocols are supported. You also use the XI adapter to exchange messages between SAP Exchange Infrastructure and the Partner Connectivity Kit (PCK).
You can use security settings to sign messages and check the signature. You can encrypt and decrypt message payloads.
Features
·        To receive XML messages from a sender system, configure the sender XI adapter.
If messages are sent from the Integration Server to the PCK, you must create a sender XI adapter in the PCK.
·        To send XML messages to a receiver system, configure the receiver XI adapter.
If messages are sent from the PCK to the Integration Server, you must create a receiver XI adapter in the PCK.
XI Adapter in the Integration Server
A communication channel with a receiver XI adapter can be created automatically for business systems that are defined in the System Landscape Directory. See also: Creating Communication Channels Automatically
regarding security setting,, check below
http://help.sap.com/saphelp_nw04/helpdata/en/86/0222417c22f323e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/06/e92041c877f623e10000000a155106/frameset.htm
   XI adapter sends the data through XI protocol which works on HTTP and XML.
So, security for XI adapter means
1) HTTPS(Communication channel security)
2) Message Level Security( You can send messages further in encrypted form)
The communication via web service may have advantages, if you want communicate with non XI systems.
In your scenario, there is direct communication between XI engines, so you can go for XI adapter. The XI adapter which is normally used to configure the exchange of messages with in an Integration Server, canbe extended to exchange messages between the two Integration Servers in the scenario.
Please verify if if you have the common SLD for both XI systems. its preferable to go for seperate SLDs
Check out the similar threads, XI to XI scenarios:
XI adapter there is one option "Security Settings"..
You can do client authentication, 128-bit encryption etc
btw,we can do kind of data encryption in the mapping with java classes and you can pass the value.. but it is just a data level or message level
But generally use cerfticates in the adapters for the secuity purpose. these will help you to give more inputs
/people/rahul.nawale2/blog/2006/05/31/how-to-use-client-authentication-with-soap-adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0650f56-7587-2910-7c99-e1b6ffbe4d50
Thanks,
Satya Kumar

Encrypted local store corrupted

When using the ADL to run my HTML based application I can store data in the encrypted local store fine. When the app is packaged and installed, I can set and retrieve data from the local store the first time the application is run. If I then close down the application and start it up again, accessing the ELS throws an error.
I've found information on various sites about how some AIR developers get their user base to overcome such issues but surely this isn't the way forward. Is their a fundamental bug with the ELS in Adobe Air or can anyone help point me in the right direction so I can rectify this problem.

Joe,
Thanks very much for responding. I have now added the stronglyBoung argument when setting data in the ELS although this was not causing the problem. I did however, fail to copy my pre-populated database from the application directory to the application storage directory which meant that I was indeed changing the database file in the application directory at runtime....doh!
When developing, my database was stored in the application directory which of course did not produce any unexpected results.
var database = {};
database.dbFileName = 'lizard.db';
database.dbFile = air.File.applicationDirectory.resolvePath(database.dbFileName);
So, now I have changed the database file to the application storage directory and then copy a pre-populated template database over if this file does not exist:
var database = {};
database.dbFileName = 'lizard.db';
database.dbFile = air.File.applicationStorageDirectory.resolvePath(database.dbFileName);
if (!database.dbFile.exists) {
var dbTemplate = air.File.applicationDirectory.resolvePath(database.dbFileName);
dbTemplate.copyTo(database.dbFile, true);
Thanks very much for your help and pointing out where I could be going wrong - much appreciated.

Slow boot and overall system sluggishness.

My Macbook Pro is booting up very slow sometimes. It will take 10-15 minutes to be usable even though there are almost no startup items. It will happen only sometimes, most of the time I will boot in about a minute like it should. Still the system will slow down from time to time, for example the photoshop file open dialogue is extremely slow as is accessing files in the finder.
I already did PRAM and SMC reset and repaired permissions using the restore partition. Below are my EtreCheck results and a bootlog from a slow boot a few days ago.
EtreCheck version: 1.9.15 (52)
Report generated 3. Oktober 2014 16:59:07 MESZ
Hardware Information: ?
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 21:8:6
Disk Information: ?
Hitachi HTS547550A9E384 disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
HDD (disk0s2) / [Startup]: 499,25 GB (375,48 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Apple Inc. iPhone
Native Instruments Audio Kontrol 1
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Configuration files: ?
/etc/hosts - Count: 31
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[loaded] com.caiaq.driver.NIUSBHardwareDriver (2.6.0 - SDK 10.8) Support
[not loaded] com.caiaq.driver.NIUSBMaschineControllerDriver (2.5.2 - SDK 10.7) Support
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[loaded] com.klieme.TMSHelper.plist Support
[not loaded] com.maintain.AutoLoginUserScreenLocked.plist Support
[not loaded] com.maintain.CocktailScheduler.plist Support
[not loaded] com.maintain.HideSpotlightMenuBarIcon.plist Support
[not loaded] com.teamviewer.teamviewer_service.plist Support
[loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
Launch Agents: ?
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[not loaded] com.maintain.LogOut.plist Support
[not loaded] com.maintain.PurgeInactiveMemory.plist Support
[not loaded] com.maintain.Restart.plist Support
[not loaded] com.maintain.ShutDown.plist Support
[not loaded] com.maintain.Sleep.plist Support
[running] com.maintain.SystemEvents.plist Support
[not loaded] com.teamviewer.teamviewer.plist Support
[not loaded] com.teamviewer.teamviewer_desktop.plist Support
User Launch Agents: ?
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.google.keystone.agent.plist Support
User Login Items: ?
iTunesHelper
Alfred 2
WDQuickView
Internet Plug-ins: ?
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 10.1.12 Support
AdobePDFViewer: Version: 10.1.12 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions: ?
Adblock Plus
ClickToPlugin-2
Awesome Screenshot (Disabled)
LinkThing
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
Flash Player Support
Native Instruments USB Audio Support
Time Machine: ?
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
HDD: Disk size: 464.96 GB Disk used: 115.27 GB
Destinations:
TimeMachine [Network] (Last used)
Total size: 3 TB
Total number of backups: 17
Oldest backup: 2014-08-03 17:35:39 +0000
Last backup: 2014-09-30 20:23:15 +0000
Size of backup disk: Excellent
Backup size 3 TB > (Disk size 464.96 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      7% WindowServer
      5% Safari
      2% hidd
      0% fontd
      0% SystemUIServer
Top Processes by Memory: ?
180 MB Safari
147 MB mds_stores
131 MB com.apple.IconServicesAgent
115 MB Finder
82 MB com.apple.WebKit.WebContent
Virtual Memory Information: ?
3.46 GB Free RAM
2.05 GB Active RAM
1.19 GB Inactive RAM
1.30 GB Wired RAM
691 MB Page-ins
0 B Page-outs
29.09.14 09:06:40,000
bootlog[0]
BOOT_TIME 1411974400 0
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.bookstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
syslogd[20]
Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
29.09.14 09:09:10,000
kernel[0]
Longterm timer threshold: 1000 ms
29.09.14 09:09:10,000
kernel[0]
PMAP: PCID enabled
29.09.14 09:09:10,000
kernel[0]
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
29.09.14 09:09:10,000
kernel[0]
vm_page_bootstrap: 1953945 free pages and 126823 wired pages
29.09.14 09:09:10,000
kernel[0]
kext submap [0xffffff7f807a9000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff80007a9000]
29.09.14 09:09:10,000
kernel[0]
zone leak detection enabled
29.09.14 09:09:10,000
kernel[0]
"vm_compressor_mode" is 4
29.09.14 09:09:10,000
kernel[0]
standard timeslicing quantum is 10000 us
29.09.14 09:09:10,000
kernel[0]
standard background quantum is 2500 us
29.09.14 09:09:10,000
kernel[0]
mig_table_max_displ = 74
29.09.14 09:09:10,000
kernel[0]
TSC Deadline Timer supported and enabled
29.09.14 09:09:10,000
kernel[0]
"name" not a kext
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
29.09.14 09:09:10,000
kernel[0]
calling mpo_policy_init for Sandbox
29.09.14 09:09:10,000
kernel[0]
Security policy loaded: Seatbelt sandbox policy (Sandbox)
29.09.14 09:09:10,000
kernel[0]
calling mpo_policy_init for Quarantine
29.09.14 09:09:10,000
kernel[0]
Security policy loaded: Quarantine policy (Quarantine)
29.09.14 09:09:10,000
kernel[0]
calling mpo_policy_init for TMSafetyNet
29.09.14 09:09:10,000
kernel[0]
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
29.09.14 09:09:10,000
kernel[0]
Copyright (c) 1982, 1986, 1989, 1991, 1993
29.09.14 09:09:10,000
kernel[0]
The Regents of the University of California. All rights reserved.
29.09.14 09:09:10,000
kernel[0]
MAC Framework successfully initialized
29.09.14 09:09:10,000
kernel[0]
using 16384 buffer headers and 10240 cluster IO buffer headers
29.09.14 09:09:10,000
kernel[0]
AppleKeyStore starting (BUILT: Aug 17 2014 20:21:39)
29.09.14 09:09:10,000
kernel[0]
IOAPIC: Version 0x20 Vectors 64:87
29.09.14 09:09:10,000
kernel[0]
ACPI: sleep states S3 S4 S5
29.09.14 09:09:10,000
kernel[0]
pci (build 20:04:33 Aug 17 2014), flags 0x63008, pfm64 (36 cpu) 0xf80000000, 0x80000000
29.09.14 09:09:10,000
kernel[0]
[ PCI configuration begin ]
29.09.14 09:09:10,000
kernel[0]
console relocated to 0xf80000000
29.09.14 09:09:10,000
kernel[0]
[ PCI configuration end, bridges 12, devices 16 ]
29.09.14 09:09:10,000
kernel[0]
AppleIntelCPUPowerManagement: Turbo Ratios 0057
29.09.14 09:09:10,000
kernel[0]
AppleIntelCPUPowerManagement: (built 20:17:40 Aug 17 2014) initialization complete
29.09.14 09:09:10,000
kernel[0]
mcache: 4 CPU(s), 64 bytes CPU cache line size
29.09.14 09:09:10,000
kernel[0]
mbinit: done [96 MB total pool size, (64/32) split]
29.09.14 09:09:10,000
kernel[0]
Pthread support ABORTS when sync kernel primitives misused
29.09.14 09:09:10,000
kernel[0]
BTCOEXIST off
29.09.14 09:09:10,000
kernel[0]
BRCM tunables:
29.09.14 09:09:10,000
kernel[0]
pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
29.09.14 09:09:10,000
kernel[0]
rooting via boot-uuid from /chosen: 176B7B54-8174-3798-BF61-52E2B0E98E94
29.09.14 09:09:10,000
kernel[0]
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeDataless kmod start
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeLZVN kmod start
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeZlib kmod start
29.09.14 09:09:10,000
kernel[0]
FireWire (OHCI) Lucent ID 5901 built-in now active, GUID a4b197fffe9af848; max speed s800.
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeDataless load succeeded
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeLZVN load succeeded
29.09.14 09:09:10,000
kernel[0]
com.apple.AppleFSCompressionTypeZlib load succeeded
29.09.14 09:09:10,000
kernel[0]
AppleIntelCPUPowerManagementClient: ready
29.09.14 09:09:10,000
kernel[0]
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Hitachi HTS547550A9E384 Media/IOGUIDPartitionScheme/HRVSTR HDD@2
29.09.14 09:09:10,000
kernel[0]
BSD root: disk0s2, major 1, minor 2
29.09.14 09:09:10,000
kernel[0]
AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
29.09.14 09:09:10,000
kernel[0]
Thunderbolt Self-Reset Count = 0xedefbe00
29.09.14 09:09:10,000
kernel[0]
hfs: mounted HDD on device root_device
29.09.14 09:09:10,000
kernel[0]
Waiting for DSMOS...
29.09.14 09:09:10,000
kernel[0]
process taskgated[13] caught causing excessive wakeups. Observed wakeups rate (per sec): 1423; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45017
29.09.14 09:07:18,002
com.apple.launchd[1]
*** launchd[1] has started up. ***
29.09.14 09:07:18,002
com.apple.launchd[1]
*** Shutdown logging is enabled. ***
29.09.14 09:08:43,028
fseventsd[45]
event logs in /.fseventsd out of sync with volume. destroying old logs. (3 122 43080)
29.09.14 09:08:53,416
hidd[44]
void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
29.09.14 09:08:53,418
hidd[44]
Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
29.09.14 09:09:11,000
kernel[0]
VM Swap Subsystem is ON
29.09.14 09:09:11,000
kernel[0]
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
29.09.14 09:09:11,000
kernel[0]
IO80211Interface::efiNVRAMPublished():
29.09.14 09:09:12,342
com.apple.SecurityServer[26]
Session 100000 created
29.09.14 09:09:17,027
com.apple.usbmuxd[18]
usbmuxd-344 on Jul 29 2014 at 13:52:57, running 64 bit
29.09.14 09:09:22,000
kernel[0]
Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, No flow-control, Debug [796d,2301,0de1,0300,c1e1,3800]
29.09.14 09:09:26,367
stackshot[22]
Timed out waiting for IOKit to finish matching.
29.09.14 09:09:26,000
kernel[0]
AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
29.09.14 09:09:26,573
spindump[71]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:26,573
spindump[71]
Unable to register Stop Spinning port: 1011
29.09.14 09:09:26,574
spindump[71]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:27,177
configd[55]
dhcp_arp_router: en1 SSID unavailable
29.09.14 09:09:27,189
configd[55]
network changed.
29.09.14 09:09:27,189
configd[55]
setting hostname to "Richard-Muhler.local"
29.09.14 09:09:28,000
kernel[0]
flow_divert_kctl_disconnect (0): disconnecting group 1
29.09.14 09:09:32,529
com.apple.SecurityServer[26]
Entering service
29.09.14 09:09:32,619
awacsd[58]
Starting awacsd connectivity_executables-97.1 (Jul 27 2014 17:02:42)
29.09.14 09:09:32,623
awacsd[58]
InnerStore CopyAllZones: no info in Dynamic Store
29.09.14 09:09:32,643
UserEventAgent[11]
Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
29.09.14 09:09:32,654
UserEventAgent[11]
Captive: CNPluginHandler en1: Inactive
29.09.14 09:09:32,657
digest-service[64]
label: default
29.09.14 09:09:32,658
digest-service[64]
dbname: od:/Local/Default
29.09.14 09:09:32,658
digest-service[64]
mkey_file: /var/db/krb5kdc/m-key
29.09.14 09:09:32,658
digest-service[64]
acl_file: /var/db/krb5kdc/kadmind.acl
29.09.14 09:09:32,660
digest-service[64]
digest-request: uid=0
29.09.14 09:09:32,675
mDNSResponder[36]
mDNSResponder mDNSResponder-522.92.1 (Jul 27 2014 17:31:49) starting OSXVers 13
29.09.14 09:09:32,000
kernel[0]
Sandbox: mDNSResponder(36) deny file-read-data /Library/Preferences/com.apple.security-common.plist
29.09.14 09:09:32,708
digest-service[64]
digest-request: netr probe 0
29.09.14 09:09:32,709
digest-service[64]
digest-request: init request
29.09.14 09:09:32,721
digest-service[64]
digest-request: init return domain: BUILTIN server: RICHARD-MUHLER indomain was: <NULL>
29.09.14 09:09:32,737
configd[55]
network changed.
29.09.14 09:09:32,740
configd[55]
network changed: DNS*
29.09.14 09:09:32,741
mDNSResponder[36]
D2D_IPC: Loaded
29.09.14 09:09:32,741
mDNSResponder[36]
D2DInitialize succeeded
29.09.14 09:09:32,743
mDNSResponder[36]
4: Listening for incoming Unix Domain Socket client requests
29.09.14 09:09:32,746
systemkeychain[87]
done file: /var/run/systemkeychaincheck.done
29.09.14 09:09:32,776
networkd[104]
networkd.104 built Aug 24 2013 22:08:46
29.09.14 09:09:33,089
airportd[62]
airportdProcessDLILEvent: en1 attached (up)
29.09.14 09:09:33,000
kernel[0]
createVirtIf(): ifRole = 1
29.09.14 09:09:33,000
kernel[0]
in func createVirtualInterface ifRole = 1
29.09.14 09:09:33,000
kernel[0]
AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
29.09.14 09:09:33,000
kernel[0]
AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
29.09.14 09:09:33,000
kernel[0]
Created virtif 0xffffff8020d6b400 p2p0
29.09.14 09:09:33,350
locationd[41]
NBB-Could not get UDID for stable refill timing, falling back on random
29.09.14 09:09:33,808
locationd[41]
Location icon should now be in state 'Inactive'
29.09.14 09:09:33,821
aosnotifyd[61]
ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
29.09.14 09:09:33,865
mdmclient[37]
ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'
29.09.14 09:09:33,932
apsd[60]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:38,337
sandboxd[107]
([62]) airportd(62) deny file-read-data /private/var/root/Library/Preferences/ByHost/.GlobalPreferences.A041C59B-5480-5 7C2-875E-9C156DC9D4C9.plist
29.09.14 09:09:44,006
apsd[60]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:47,632
awacsd[58]
Exiting
29.09.14 09:09:48,556
spindump[71]
CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
29.09.14 09:09:49,000
kernel[0]
hfs: mounted Recovery HD on device disk0s3
29.09.14 09:09:52,266
configd[55]
subnet_route: write routing socket failed, Network is unreachable
29.09.14 09:09:54,196
configd[55]
network changed: Proxy
29.09.14 09:10:10,177
fseventsd[45]
implementation_register_rpc: implementation_added_client() => 22
29.09.14 09:10:11,655
configd[55]
InterfaceNamer: timed out waiting for IOKit to quiesce
29.09.14 09:10:11,655
configd[55]
Busy services :
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1 [2, 212828 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert [7, 58245 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/CPU0@0 [1, 55411 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/CPU0@0/AppleACPICPU [1, 55172 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0 [1, 57881 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI [9, 57875 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/MCHC@0 [1, 55180 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1 [1, 57873 ms]
29.09.14 09:10:11,655
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP [1, 57273 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0 [1, 57273 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP [1, 56667 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0 [1, 56667 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP [1, 56650 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0 [1, 56650 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL [1, 56311 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderboltNHIType1 [1, 56311 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderboltNHIType1/IOThunderbo ltController [1, 56311 ms]
29.09.14 09:10:11,656
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/PEG1@1,1/IOPP/UPSB@0/ IOPP/DSB0@0/IOPP/NHI0@0/AppleThunderboltHAL/AppleThunderboltNHIType1/IOThunderbo ltController/IOThunderboltLocalNode [1, 55173 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2 [1, 55177 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/pci8086,1c3a@16 [1, 55177 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A,7 [1, 57124 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A,7/AppleUSBEHC I [1, 56602 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/EHC2@1A,7/AppleUSBEHC I/Bluetooth USB Host Controller@fa113000 [1, 55176 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/HDEF@1B [1, 55184 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2 [1, 56629 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP [1, 56113 ms]
29.09.14 09:10:11,657
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 [1, 56113 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 /AppleFWOHCI [!registered, !matched, 1, 55552 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 /AppleFWOHCI/IOFireWireController [1, 55552 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/RP03@1C,2/IOPP/FRWR@0 /AppleFWOHCI/IOFireWireController/IOFireWireLocalNode [1, 55552 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/LPCB@1F [1, 55183 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SBUS@1F,3 [1, 55184 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/SMC [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/SMS0 [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/ALS0 [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/GMUX [1, 55177 ms]
29.09.14 09:10:11,658
configd[55]
MacBookPro8,1/AppleACPIPlatformExpert/PNLF [1, 55177 ms]
29.09.14 09:10:11,659
configd[55]
MacBookPro8,1/IOResources [1, 57289 ms]
29.09.14 09:10:13,156
fseventsd[45]
log dir: /.fseventsd getting new uuid: 4D918F9C-D859-4503-908A-3E5829A68AB2
29.09.14 09:10:20,817
diskarbitrationd[51]
kextd [12]:15659 not responding.
29.09.14 09:10:22,503
configd[55]
network changed: v4(en0+:192.168.2.212) DNS+ Proxy+ SMB
29.09.14 09:10:22,000
kernel[0]
hfs: unmount initiated on Recovery HD on device disk0s3
29.09.14 09:10:23,445
warmd[17]
[warmctl_evt_timer_bc_activation_timeout:287] BC activation bcstop timer fired!
29.09.14 09:10:27,173
ntpd[120]
proto: precision = 1.000 usec
29.09.14 09:10:33,493
apsd[60]
Unrecognized leaf certificate
29.09.14 09:10:36,913
sandboxd[107]
DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
29.09.14 09:10:37,000
kernel[0]
SMC::smcHandleInterruptEvent WARNING status=0x0 (0x40 not set) notif=0x0
29.09.14 09:10:37,000
kernel[0]
SMC::smcReadKeyAction ERROR: smcReadData8 failed for key LsNM (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
SMC::smcReadKeyAction ERROR LsNM kSMCKeyNotFound(0x84) fKeyHashTable=0x0
29.09.14 09:10:37,000
kernel[0]
SMC::smcGetLightshowVers ERROR: smcReadKey LsNM failed (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
SMC::smcPublishLightshowVersion ERROR: smcGetLightshowVers failed (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
SMC::smcInitHelper ERROR: smcPublishLightshowVersion failed (kSMCKeyNotFound)
29.09.14 09:10:37,000
kernel[0]
Previous Shutdown Cause: 5
29.09.14 09:10:37,000
kernel[0]
SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
29.09.14 09:10:39,000
kernel[0]
en3: promiscuous mode enable succeeded
29.09.14 09:10:41,000
kernel[0]
IOBluetoothUSBDFU::probe
29.09.14 09:10:41,000
kernel[0]
IOBluetoothUSBDFU::probe ProductID - 0x821A FirmwareVersion - 0x0042
29.09.14 09:10:41,000
kernel[0]
**** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xb400 ****
29.09.14 09:10:41,000
kernel[0]
**** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xb400 ****
29.09.14 09:10:42,000
kernel[0]
fGPUIdleIntervalMS = 0
29.09.14 09:10:42,793
UserEventAgent[11]
assertion failed: 13F34: com.apple.telemetry + 17682 [AE0C3032-1747-317E-9871-E26B5B6B0120]: 0xffffffffe0000001
29.09.14 09:10:43,000
kernel[0]
init
29.09.14 09:10:43,000
kernel[0]
probe
29.09.14 09:10:43,000
kernel[0]
start
29.09.14 09:10:43,000
kernel[0]
DSMOS has arrived
29.09.14 09:10:43,000
kernel[0]
[IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xb400
29.09.14 09:10:43,000
kernel[0]
[IOBluetoothHCIController][start] -- completed
29.09.14 09:10:43,128
loginwindow[39]
Login Window Application Started
29.09.14 09:10:43,000
kernel[0]
[IOBluetoothHCIController::setConfigState] calling registerService
29.09.14 09:10:43,000
kernel[0]
**** [IOBluetoothHCIController][protectedBluetoothHCIControllerTransportShowsUp] -- Connected to the transport successfully -- 0xcd40 -- 0xb000 -- 0xb400 ****
29.09.14 09:10:43,266
WindowServer[132]
Server is starting up
29.09.14 09:10:43,283
mds[35]
(Normal) FMW: FMW 0 0
29.09.14 09:10:44,000
kernel[0]
mTail has not been written to hardware: mTail = 0x00000000, hardare tail register = 0x00000040
29.09.14 09:10:44,370
WindowServer[132]
Session 256 retained (2 references)
29.09.14 09:10:44,371
WindowServer[132]
Session 256 released (1 references)
29.09.14 09:10:44,385
WindowServer[132]
Session 256 retained (2 references)
29.09.14 09:10:44,388
WindowServer[132]
init_page_flip: page flip mode is on
29.09.14 09:10:45,086
WindowServer[132]
Found 13 modes for display 0x00000000 [13, 0]
29.09.14 09:10:45,095
WindowServer[132]
Found 18 modes for display 0x00000000 [18, 0]
29.09.14 09:10:45,103
WindowServer[132]
Found 1 modes for display 0x00000000 [1, 0]
29.09.14 09:10:45,110
WindowServer[132]
Found 1 modes for display 0x00000000 [1, 0]
29.09.14 09:10:45,112
WindowServer[132]
mux_initialize: kAGCGetMuxState (kMuxControl, kMuxControl_switchingMode) failed (0xe0000

John Galt
1. I have backed up my Mac on WD MyCloud, a small NAS with a Time Machine feature.
2. I have uninstalled Cocktail and cleared all settings reverting them to default.
3. I removed 30 entries for privacy reasons. If it's necessary i can PM you the full list.
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0 localhost
127.0.0.1 *removed*
127.0.0.1 *removed*
127.0.0.1 *removed*
Linc Davis
I restarted in safe mode and restarted again. I guess I have to wait now to see if this is fixed or should post the console output?

Hello, I'm pretty sure my fan on my 2009 mac book pro has stopped running. Would this cause the computer to slow down and take for ever to boot up and show the color wheel every time I select an application ?

Hello, I'm pretty sure my fan on my 2009 mac book pro has stopped running. Would this cause the computer to slow down and take for ever to boot up and show the color wheel every time I select an application ? how involved to replace fan ? cost ?
thanks

Not directly, but if the CPU overheats because of incompatible software, that would cause slowdowns. Do not allow the computer to run if the fan is not working unless you wish to fry your motherboard. Please make a Genius Appointment and take it in for service.

User requesting system is slow what steps will you take?

User requesting system is slow what steps will you take?

Hi
Sorry, but this question is hopelessly vague, and I don't think that anyone stands much chance of answering.
What system are you talking about, and what is it requesting?
Paul

Slow System and cost to take to local store

Similar Messages

Maybe you are looking for